Ames can custom design your anodes with our extruding, casting and rolling techniques.

We specialize in fabrication of anodes for chromium plating, with an inventory of

antimonialllead and tin/lead sheet, wire and pipe products

4323 South Western Boulevard Chicago, Illinois 60609

Phone 773-523-3230 Fax 773-523-3854 Toll free outside IL I-800-255-6937

THE QUALITY NAME IN SOLDER, TIN AND LEAD PRODUCTS

Circle 009 on reader information card

longer spans. Both are available uith flame-retardant resin systems and come in a variety of colors. Both are light in weight and e&sy to install without special tools or equipment.

Circle 433 on the reader service card

Washer Plugs Shercon Los Angeles

Shercon’s Hollow Washer Plugs :lre color coded and can withstand tempcr- atures up to 600°F. These plugs can be applied to threaded or nonthreaded holes. The are recommended for pow-

der coating. electrocoating, and plat- ing, and can be used X to 12 times.

Circle 434 on the reader service card

Glass Beads Sil-trade USA Inc. Morristown, N. J.

Sit-trade’s new process produces 100% round high-tech glass beadc for media milling. Adv:mtape$ include clean, pure soda lime glass with ‘0” air inclusion, high crush strength, and no devitrification.

Circle 435 on the reader service card

Filtration System Modules Sedilco L fd. Northbrook, 111.

Serfilco’s new series of pumps and filter modules, Admiral EHJ. is assem- bled on a two-piece modular PVC mounting plate featuring a rabbett joint and secured with 3 16 stainless steel hardware. The pump discharge and fil- ter inlet ;Ire connected with a union fitting allowing simplified installation and convenient pump removal for rcs- ervoir or pump maintenance. The ays- tern is capable of higher flow rates than conventional systems due to the inno- vative devign of the inlet and outlet ports.

Circle 4.36 on the reader service card

Static and Particulate Removal System Simco Hatfield, Pa.

The Magnum Force blower-driven, air-knife halo system is designed to effectively provide static neutraliza- tion, cleaning, and liquid blow-off without compressed air. By using blowers instead of compressed air the Magnum Force can product 30 to 70% lower operation costs. The sy.stem in- corporate\ ;I high-velocity blower and high-penetration air knife to direct ;I continuous stream of clean air over a tlat or conloured surface including in- terior and exterior automotive parts. The design provides tlexibility iod precise uir volume control and a veloc- ity range at discharge ot‘ 4,500 to 27.500 fpm.

88 METAL FINISHING l NOVEMBER 1998

Circle 437 on the reader service card

Electroless Nickel Process Sirius Technology Inc. Oriskany, IV. Y

Millenium ACN-2 is a low-phos- phorus process that yields a deposit with an as-plated hardness nearly 40% higher than standard electroless nickel coatings. Postplate heat treatment to increase hardness may be eliminated. In addition to offering greater resis- tance to abrasion and wear the Mille- nium ACN-2 deposits are compres- sively stressed up to 6 metal turnovers and produce a deposit with a melting range of 2,000 to 2,300”F.

Circle 438 on the reader service card

Paint Stripping Solvent Kleene Inc. Peabody Mass.

D-Zolve 333 makes it possible to re- move cured paints and powder coatings from metal and plastic surfaces. Immers- ing painted parts in D-Zolve breaks the chemical bond between the paint or coat- ing and the metal or plastic substrate. When this bond breaks, the paint layers pull away from the substrate and drop to the bottom of the tank. Strippable paints include epoxy. urethane, alkyd, iridium, and others. The stripper contains no me- thylene chloride, acids. caustics, or chlo- rinated components. The product is com- patible with aluminum, brass, copper. stainless steels. carbon steels, TPO. and other plastics.

Circle 439 on the reader service card

High-Temperature Masking Products StockCap St. Louis

StockCap offers clear silicone mask- ing caps and plugs used in powder coating and electrocoating finishing systems where temperatures reach

Circle 046 on reader information card

600°F. There are no coloring agents to bleed under high heat. The caps and plugs offer good resistance to acids, bases, and solvents without hardening or cracking and are reusable.

Circle 440 on the reader service card

Corrosion-Resistant Tank Tri-Mer Corp. Owosso, Mich.

SuperCap large-capacity process

tanks have 1 -in. solid wall material manufacturled from polypropylene, PVC. Korzan. and several other spe- cialty plastics. The tanks feature structural supports to hold the tank in position and prevent bowing of the sidewalls. Support material is 3 I6 stainless steel or plastic-coated steel. Tank sizes range to 75 feet or more and all are rated for 200°F continu- ous operating temperature.

Circle 441 on the reader service card

METAL FINISHING . NOVEMBER 1998 89