Steel Ltd. Cap… · Web view2017/06/22 · BANDWIDTH PROBLEMS, CONNECTIVITY PROBLEMS WITH THE LOCAL ISP (INTERNET SERVICE PROVIDER), SLOWNESS TO ACCESS PAGES FOR DOWNLOADING ETC

CATALOUGE SERIAL NO: TSL/AHB/JUNE/036/17-18, Rev-04June 22, 2017

Auction Catalogue Auction conducted by A H Bilimoria & Co.

SALE OF CAPITAL ITEMS OF TATA STEEL LIMITED, ON ‘’AS IS WHERE IS AND NO COMPLAINT BASIS’’Catalogue Serial Number: TSL/AHB/JUNE/036/17-18, Rev-04Materials : CAPITAL ITEMSSeller: Tata Steel Limited Auction website: www.ahbilimoria.com

e-Auction Date & Time: 22nd June, 2017…….. at 12.00 PM

Inspection Date & Time: 20th June, 2017 :At 10.30 AM ---------------- For inspection of materials the interested customers should report at GOPAL MAIDAN, Opp. Novelty Restaurant, Bistupur Police Station, Jamshedpur-831001 BY 10.00 A.M.

Date of Security Money Deposit 21st June, 2017Till ……… 05.00 PMContact Details:

For Post Auction @ A H Bilimoria & CompanyAuction Room 033-2229-4833/6577Inspection & Helpdesk Mr. A Dey- 09831132642, Mr. Bimal Bhardwaj-09431373386Money Receipts Mr. Y John – 09432368402Delivery Order Mr. A Mazumdar- 09883421336Sale Confirmation Letter Mr. A Das - 033-2229-4833 / 6577 / 2760, 30290771Refund Mr. S Paul - 033-2229-4833 / 6577 / 2760,Demand Note Mr. S Paul - 033-2229-4833 / 6577 / 2760,Disablement Mr. A Mazumdar- 09883421336C Forms & CST Security Deposit Mr. S Paul - 033-2229-4833 / 6577 / 2760,Customer Complaint Mr. A K Sil – 09830074122, Mr. D Pyne – 09830438481For any unresolved issues Email_ [email protected],[email protected] Escalation for unresolved issues Mr. A K Sil – 09830074122, Email _ [email protected], [email protected]

For Commercial Issue : Tata Steel Limited:-Contact Person Mr. Surajit Sen, E-mail- [email protected]

For Delivery related Issued @ Tata Steel Limited:-Contact Person Contact Number Provided in Material List.

GPS Installation in Vehicles: GPS will be mandatory for each vehicle entering TSL Works with effect from 1st September 2015, GPS will be installed by vendor E-Trans outside TSL Works gate with a nominal charges of Rs. 100 per vehicle.

A. MATERIAL DETAILS: AS PER ANNEXURE :

Page 1 of 19

mailto:[email protected]




http://www.ahbilimoria.com/


B. Payment and Lifting Schedule:

Lot No.

Payment ScheduleLifting Schedule

(working days from the next day of DO release)

EMD 1st installment 2nd installment 1st installment lifting days

2nd installment lifting days

For All Material 02 Working days from Date of Lot Confirmation

03 Working Days From Date of EMD

03 Working Days from the 1st Installment date[Only Applicable if material value (Rate X Tonnage)

crosses Rs. 10 Lakh]

10 Working days from the D/O date

10 Working days from the D/O date

1. Suitable extension of due date for payment and lifting will be accorded in case of any eventualities like Strike/ Bandh/ Special restriction on vehicular movement imposed by the local Administration etc.

2. Requirements of participation:2.1 Registration: Before participation in the e-Auction, a prospective bidder shall be required to get registered with A H Bilimoria & Co. For details visit

www.ahbilimoria.com

2.2 Documentation: The following documents need to be submitted by the bidder interested in participating in the e-Auction to A H Bilimoria & Co. prior to theDate of the e-Auction.

PAN Card, TIN No, Registration Form Letter of Interest duly signed and stamped by bidder. Each page of the Terms & Conditions to be signed and stamped by the buyer and to be submitted to A H Bilimoria & Co. Bidders are requested to submit copies of their SOI's before participating in the e Auction.

2.3 Security Deposit: Non-Interest bearing security deposit of Rs.50,000/- (Rupees Fifty Thousand only) in favour of “A H Bilimoria & Co.” payable at Kolkata/Jamshedpur.

2.4 Modes of Security Deposit: PO / DD / CHQ or through NEFT in favour of "A. H. BILIMORIA & COMPANY" to be deposited with HDFC Bank A/c. No. 06932560001205, IFSC Code: HDFC0000693, Branch name: 31, Chowringhee Road, Kolkata – 700016.

3. Inspection Rules & Policy: All interested parties should reach at GOPAL MAIDAN, Opp. Novelty Restaurant, Bistupur Police Station, Jamshedpur-831001, by 10:00 AM (or as announced) on the date

of inspection. Only registered customers/bidders/representatives of firms shall be allowed for inspection of material, subject to fulfilling their safety requirement of the steel works. Taking photographs of the material is strictly prohibited. Customers are advised to ensure that they inspect the materials on offer on the scheduled date as mentioned in the catalogue, before

Participating in the auction. It is retreated that all materials are offer / sold by Tata Steel on “AS-IS-WHERE-IS” and “NO-COMPLAINTS” basis, and no complaint what so evershall be entertained regarding the quality of materials after the sale.

(All are required to bring safety Goggles, Safety Helmet & Safety Shoes. Without the safety equipment’s no one will be allowed to inspect the material inside the works)

“TATA Steel would not accept any claim from any customer for non-inspection of materials.”Page 2 of 19

http://www.ahbilimoria.com/


Interested bidders have to come with safety shoes, safety jackets, and safety goggles & safety helmets at the time of inspection. All interested parties have to arrange for their own safety shoes, safety jackets, safety helmets and safety goggles as per Tata Steel standards. No person will be allowed to enter the works without these. Compliance to Tata Steel safety norms is a must. No complaints during lifting, in what-so-ever manner, will be entertained if customers fail to inspect the materials during scheduled inspection dates. No ''people movement'' shall be allowed within the danger zone, at the time of loading/delivery of materials from the yards. Tata Steel will not be responsible for any delays arising out of non-compliance to Tata Steel norms.

4. Bidding modalities: 4.1 Price Bid Basis: In Indian rupees as per unit of measurement as given in Material List. Price to be quoted is basic, ex- location exclusive of excise duty (In case of consignment

agency sale price to be quoted ex location inclusive of excise duty), Sales tax and any other statutory levies.4.2 Bid Increment : Rs.100/- ( Rupees Hundred only ) / (or as specified)4.3 Type of Auction: English No Ties 4.4 Bid Validity: Bid shall be valid for 10 (Ten working days excluding Saturdays, Sundays and holidays) working days counted from the next day of auction process in case of

auction against a catalogue which is completed on the same day. And if it is continuing on any other day the counting of days for lot confirmation shall be from the next day of completion of entire auction process.

4.5 Bid duration: Lots open for bidding would be 10 minutes only. If, No bids received within these 10 minutes the lots are closed automatically.4.6 Auto Extension of the Auction Timings: In the event of bids in the last sixty (60) seconds of the scheduled bid time, the Bid Timings are automatically extended for One hundred

eighty (180) seconds from each such bid. Such Auto Extension shall continue until no bids are placed for sixty (60) seconds (Engine remains inactive for sixty (60) seconds. The Inactivity Time for Auto Extension purpose is normally “3” minutes. "Service Provider" however retains the right to change the “Inactivity Time” as well as “Extension Period”. The Inactivity Time applicable for the particular Online Bid shall be visible to the customers on the Bidding page.

5. Taxes & duties:5.1 VAT / Sales Tax : As applicable5.2 Excise Duty : As applicable5.3 TCS : As applicable. In case of availing of concessional rate of TCS proper certificate issued by appropriate Income Tax

authority are to be issued in favour of the Principal Company along with payment. Self certification of Form no 27C is not acceptable. Form 27C will also have to be certified by appropriate Income tax authorities.

5.4 CST: The differential CST of 3% has to be made separately and deposited along with EMD. The same will be refunded after receiving complete endorsed C form. CST 3% security deposit is to be made available at AHB’s Kolkata / Jamshedpur office on or before the due date of balance payment. Mode of payment of CST security deposit are:

5.5 By way of PO/DD or through NEFT in favour of "A. H. BILIMORIA & COMPANY" to be deposited with HDFC Bank A/c. No. 06932560001205, IFSC Code: HDFC0000693, Branch name: 31, Chowringhee Road, Kolkata – 700016.

5.6 Any change in Excise duty, taxes and levies applicable at the time of lifting shall be applicable.

6. Payment terms & conditions : 6.1 Payments:

PAYMENT FACILITY BY RTGS / NEFT ONLY Account no. [Sample: TATAHB followed by Party code] (Each individual customer will be provided with Account number to be provided by AHB) Beneficiary name: TATA STEEL LIMITED A H B Bank Name: HDFC BANK LTD. Branch Name: Sandoz Branch, Mumbai

Page 3 of 19


IFSC Code: HDFC0000240

6.2 EMD: 10% of the material value to be paid within 02 (Two) working days from the date of lot confirmation. EMD to be adjusted in the final installment only. EMD payment is to be made within the time limit as given in letter of confirmation. No extension will be provided for the same.

6.3 Balance Payment Time: (As per payment schedule)6.4 Delayed Payment Charges (DPC) : Installment payments with DPC @ five (05) paise per Rs. 100 per day will be accepted up to 4 (Four) working days from due date of

installment payment as mentioned in the confirmation letter. This is not applicable for EMD payment.6.5 Saturdays& Sundays are excluded for counting purpose for payment schedule.6.6 In the event of Non-Receipt of Payment within the stipulated period of Payment, the Sale Offer for the approved Lot shall stand withdrawn automatically.6.7 Buyers have to send the payment deposit slip (UTR No /Scan Copy of NEFT/RTGS Transaction Slip) against Lot No. immediately after the payment to AHB at email id:

[email protected]

7. Lifting terms & conditions:7.1 DOs will be handed over to authorized representatives of bidders on receipt of payment. Lifting date is calculated from the next day of DO Release date. 7.2 Loading Charges: Rs.100 per MT all locations7.3 Loading shall be given strictly as per the statutory norms & safety norms of Tata Steel Ltd.7.4 Lifting with Ground Rent: Lifting along with ground rent will be allowed up to 4 (four) working days from the last date of lifting period. In case the lifting is not complete, and no

request is made by the customer within the period of four days, the company reserves the right to close the lot, and refund the balance to the party after deducting for any shortfall in lifting as per norms laid down in the catalogue. Ground Rent will be calculated on balance unlifted quantity @ 05 paise (inclusive of service tax) per Rs.100/- per day

7.5 Additional lifting days for advance payment of installment - If the installment payment is made in advance, then additional lifting days (equivalent to the number of days payment made in advance) would be given. This would not be applicable for EMD payment.

7.6 PICK & CHOOSE NOT ALLOWED FOR ANY OF THE LOTS.

7.7 LOT TRANSFER WILL NOT BE ALLOWED & NO STOCK TRANSFER WILL BE DONE.

7.8 Process for transfer of ownership of vehicles sold in auction: Customer shall submit their authorization letter to AHB. AHB will hand over the same to Liaison Cell with a forwarding letter along the authenticated DO copy.AHB will collect the ownership papers from Liaison Cell for handing over to the customer for applying for transfer of ownership in DTO’s office. After transfer of ownership, the customer will show the approach Liaison Cell to collect the delivery advice for the vehicle.AHB will arrange the gate pass for the customer to visit Liaison Cell.

7.9 USE OF HYDRA CRANES BY CUSTOMERS IN ANY PREMISES/LOCATION /STOCKYARDS OF TATA STEEL AND ITS VENDORS/CONSIGNMENT AGENTS' PREMISES IS BANNED.

8. Penalties:8.1 The following penalties shall be applicable in the eventuality of a buyer defaulting in making the payment of EMD (wherever applicable) or any installment/s, as per the

stipulated schedule for each lot, in a financial year: In the first instance, a penalty of Rs. 50,000/- (Rupees Fifty Thousand only) shall be recovered from the customer. In the second instance, a penalty of Rs.100,000/- (Rupees One Lakh only) shall be recovered from the customer. In the third, and any subsequent instance, a penalty of Rs.150,000/-(Rupees One Lakh Fifty thousand only) shall be recovered and the customer shall be debarred

from participating in any auction for a period of three months from the date of debarment.In the event of any default, the customer’s user id will be disabled and the customer will be blocked from participating in any auction of TSL with immediate effect.

Page 4 of 19



The defaulting customer shall be allowed 06 (six) working days to deposit the penalty as mentioned above. In case the penalty is not received within the stipulated period, the customer’s security deposit shall be forfeited, and the defaulting customer shall be debarred from participating in any auction of TSL.

8.2 If after making payment of EMD (wherever applicable), the installment payment/s are not made by the customer as per the stipulated schedule for each lot, the entire EMD amount against such lot shall be forfeited.

8.3 In case of non- lifting of full lot quantity after making full payment, a penalty equivalent to 20% of the material value for the un-lifted quantity against each lot shall be recovered from the customer.

8.4 Penalty for dishonour of cheques: In case of dishonor of a payment instrument deposited by a customer for any reason whatsoever, the following shall be recovered from the customer:-

Rs.1000/- (service tax inclusive) in form of Demand Draft towards bankers charges per instrument.

Delayed payment charges @ 5 paise per Rs.100/- per day for the period of delay beyond the due date.

Penalty @ 1% ( Inclusive of service tax) of the dishonoured amount, subject to a maximum of Rs.25000/- ( Rupees Twenty Five Thousand Only) per dishonoured instrument

In case of non- compliance by the bidder the penalties as given in clause no. 7.1 shall be applicable.8.5 Penalty for dishonor of cheques submitted for CST payment :

In case of dishonor of a payment instrument deposited by a customer for any reason whatsoever, the following shall be recovered from the customer:- . Rs.1000/-(Rupees one thousand in form of Demand Draft) towards bankers charges per instrument.

DEFAULTS WOULD BE COUNTED AGAINST TATA STEEL LIMITED AND NOT AGAINST A PARTICULAR AUCTIONEER

9. Lot Closure Norms :

For Lot Closure, the tolerance would be ± 10% of the original quantity. However no tolerance is applicable for high value items with per ton realizable value of Rs. 50000 and more.

10. Complaints :Complaints, if any, with regard to any transaction shall have to be lodged by the buyer within three calendar months from the date of last invoice. No complaint shall be entertained thereafter, under any circumstances.

11. Jurisdiction :Any dispute arising out of any contract shall be decided in Jamshedpur by the courts in Jamshedpur and by no other courts. The courts in Jamshedpur shall have exclusive jurisdiction to adjudicate upon any such dispute.

12. General terms & conditions:12.1 Any dispute on condition of material shall not be entertained at any point after confirmation of lot.

12.2 All materials are offered/sold on “As is Where is Basis” and “No Complaint Basis”.

Page 5 of 19


12.3 Payment and invoicing has to done in the name of the H1 bidder, subject to the prices being approved.

12.4 Material purchased should be the only material being lifted from the designated location. Tata Steel has the right to check any vehicle at any moment of time. If material lifted differs from the material that is purchased by the buyer, and then the buyer/authorized representative will be permanently debarred and penal action against the buyer/ authorized representative as deemed fit shall be taken by Tata Steel Ltd.

12.5 If the safety compliance is not followed then Tata Steel can penalize the buyer/authorized representative as deemed fit.

12.6 These terms and conditions as stated above supersede the relevant terms & conditions that are given in Tata Steel Secondary General Terms and Conditions.

The terms & conditions not covered above will be as per Tata Steel’s Secondary General Terms and Conditions. Revised Standard Terms & Conditions For Tata Steel Secondary Products Auction w.e.f. 1-April-05

13. Lot Photograph:Photographs of lots are at best indicative only and do not necessarily reflect the actual condition of lots. All bidders are advised to physically inspect the offered lots before participating in the auctions. Tata steel or AHB shall not be responsible or liable for any error of judgment or bids put by bidders acting on the basis of these photographs.

14. Documents for verification regarding entry of vehicles inside Tata Steel works :

a. 15.06.2014, Eye Test certificate production is mandatory for all Truck Drivers. If the age of the driver is less than 45 years frequency of production of such certificate is once a year and if the age of the driver is more than 45 years the frequency of production of such certificate will be at an interval of every 6 months.

15. Compliance to safety norms15.1 Authorized persons (of the customer) involved in lifting of the materials will be allowed only with Personal Protective Equipments (PPE) i.e.,Safety Shoes, Safety Helmet,

Safety Goggles, Fluorescent Jacket and Hand Gloves. No "people movement" shall be allowed at the time of loading/delivery of materials from the yards" Tata Steel will not be responsible for any delays arising out of Non- Compliance to the Safety Norms.

15.2 Documents for verification regarding entry of vehicles inside Tata Steel works :

All customers to note that presentation of following set of documents to TATA STEEL authorities is COMPULSORY at the time of reporting of vehicles at TSL designated Gate for entry of Customer trucks/vehicles.a. Driving License of driver,b. Registration Card,c. Commercial Certificate,d. Fitness Certificate of Vehicle,e. Re-registration for vehicles older than 15 yearsf. InsuranceThe checklist form will be filled in at TSL designated Gate for entry of Customer trucks/vehicles before entry of vehicle.

15.3 The drivers of the vehicle must have the eye test certificate.The frequency of the testing would be as below:

1. If the age of the person is less than 45 years - Once in a year

2. If the age of the person is 45 years or more, the testing is required to be done once in every 6 months

Page 6 of 19


15.4 Requirements: a) Buzzer with Turning Indicator:- 1st June b) SUPD & RUPD:- With Immediate effect

Page 7 of 19


Page 8 of 19


Sl. No. Safety Parameters to be checked

Page 9 of 19


1 Three Piece Mirror( Truck, Trailer & Dumper)-Helper side

2 Single Mirror- Driver side

3 Rear View Mirror (Tata Ace, 207, Jeep etc.)

4 Service Brake

5 Parking Brake

6 Seat Belt

7 Head Light

8 Parking Light

9 Blinker

10 Horn

11 Reverse Alarm

12 Wiper

13 Windshield Glass

14 Air Pressure Min. 7 Kg/Cm^2

15 Run Under Protection Guard as per TSL standard

16 Side under Protection Guard as per TSL standard

17 Tyre Condition (Tread Depth, Cut Mark etc.)

18 Any Oil Leakage from the vehicle

19 Physical condition of Dallah

20 Availability of scotch block

21 Buzzer with side indicator

22 Driver's eye examination report

Legal Documents to be checked:

Sl. No. Documents to be Checked

1 RC Book

2 Insurance

3 Pollution

4 Driving licence

5 Fitness for more than 15 years old vehicle

6 NOC for outside vehicles

16. Charge of Sales Tax (VAT / CST) and issue of Statutory Forms16.1 The applicability of Sales tax (VAT/ CST) is determined on the basis of the destination state where the goods are being shipped to.

Page 10 of 19


(For instance goods shipped to within Jharkhand would attract VAT even though the SOLD-TO customer is registered outside Jharkhand. Similarly in case of goods being shipped to outside Jharkhand, CST would be chargeable even if the SOLD-TO customer is from within the state of Jharkhand)

16.2 C Form against concessional inter-state sales would be issued only by the SOLD-TO customer. Under no circumstances, the Form issued by SHIP-TO customer would be accepted

16.3 E1 form would be issued only to the SOLD-TO customer against submission of C Form by the same. Under no circumstances, the Form would be issued to SHIP-TO customer.

16.4 JVAT404 Form for local sales tax (VAT) would be issued only to the SOLD-TO customer, subject to VAT being charged on the Tax Invoice. Under no circumstances, the Form would be issued to SHIP-TO customer.

16.5 Timelines for submission of Forms / request for issue of Forms ( Pt. 16.2-16.4, ) would be as below:16.6 Submission of C Form: All C Forms against concessional inter-state sales must be submitted by the customers (complete in all aspects) and received at AHB’s office at

Kolkata for every quarter by the last day of the subsequent quarter (except for the E1 customers wherein it has to be submitted within 60 days from the end of the quarter, so that E1 form can be issued well in time).

In case of non-receipt of C form as aforesaid; Debit Notes for the differential tax would be raised in the following month, after the end of succeeding respective quarter.

16.7 Request for issue of E1 Form: Customers eligible for issue of E1 Forms, are required to provide monthly E1 transaction details in the specified format, on or before the 5th working day of the subsequent month. Requisite documents along with the enclosures should be submitted within 60 days of the end of the quarter. This shall be entertained subject to receipt of C Forms along with correct endorsement as mentioned above. Any requests / applications / details / documents (as mentioned above), received beyond the above timelines shall not be accepted or processed under any circumstances.

16.8 Application for JVAT404: All applications for JVAT404 from eligible customers need to be received at AHB’s Jamshedpur office within 2 months from the end of the financial year. Any application received beyond this point shall not be entertained under any circumstances.

For ODR items Customer / Authorised Lifter has to do Route Mapping in consultation with IBMD. Post Ro.

SPECIAL TERMS AND CONDITIONS FOR INTERNET AUCTION BANDWIDTH PROBLEMS, CONNECTIVITY PROBLEMS WITH THE LOCAL ISP (INTERNET SERVICE PROVIDER), SLOWNESS TO ACCESS PAGES FOR DOWNLOADING ETC. ARE BEYOND THE CONTROL OF THE STEEL LTD. AND A H BILIMORIA & COMPANY. HENCE NO RESPONSIBILITY LIES WITH THE STEEL LTD. OR A H BILIMORIA & COMPANY FOR THE ABOVE PROBLEMS FACED, IF ANY, BY THE BIDDERS BEFORE/DURING THE AUCTION ANY BID PLACED USING THE BIDDER'S USERNAME AND PASSWORD IS UNCONDITIONALLY BINDING ON THE BIDDER TO WHOM SUCH USERNAME AND PASSWORD HAD BEEN ALLOTTED AND HE SHALL BE SOLELY RESPONSIBLE FOR MAINTAINING THE CONFIDENTIALITY OF THE SAME AND FULLY RESPONSIBLE FOR ALL ACTIVITIES THAT OCCUR UNDER THEIR USERNAME AND PASSWORD. HENCE THE USER IS ADVISED TO CHECK THE USERNAME AND PASSWORD BEFORE THE AUCTION IN ORDER TO FAMILIARISE HIMSELF WITH THE SAME AND IS ADVISED NOT TO REVEAL IT TO ANYONE ELSE SO AS TO PREVENT MISUSE OF THE SAME. THE BIDS MADE BY THE BIDDERS AGAINST THEIR USERNAME AND PASSWORD SHALL BE IRREVOCABLE.THE BIDDERS ARE ADVISED TO REGISTER AND PRE-QUALIFY FOR BIDDING WELL IN ADVANCE AND PLACE THEIR BIDS EARLY IN ORDER TO TAKE CARE OF ANY UNFORESEEN TECHNICAL DIFFICULTY THAT MIGHT SURFACE IN THE INTERNET OPERATIONS.

Quantity offered is based on eye estimation. Delivery will be made for the estimated quantity or actual ground stock, whichever is lower. Estimation error may arise. After inspection, no complaint of whatsoever nature on estimated /offered quantity shall be entertained under any

circumstances. Bidders are advised to make their own judgement on offered quantity before bidding

Page 11 of 19


Customers are requested to generate individual gate pass by clicking on the following link http://203.197.123.30/vgps/

Note: TSL reserves the right to track IP address, MAC number and geolocation of bidding customers whenever customers participate in any auction on the A H Bilimoria & Co. auction platform for TATA Steel.

List of materialsSl.

No. Source Location Lot No Material Description Qty. UOM ED Proposed GST VAT TCS Loading LIFTING

PERIODCONTACT PERSON

CONTACT NO

1 Ram mandir

yard, 2nd Floor, Jsr RYJUN17001 Rej. Eot Elect. Pannel part. 4.96

MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

2 Ram mandir

yard, 2nd Floor, Jsr RYJUN17002 Rej. Rediator (Feuns) 12.94

MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

3 Ram mandir

yard, 3rd Floor, Jsr RYJUN17003 Rej. Casting 32.58

MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

4 Ram mandir

yard, 2nd Floor, Jsr RYJUN17004 Rej. Aluminium Cables 35.64

MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

5 Ram mandir

yard, 3rd Floor, Jsr RYJUN17005

Rej. Mech. Part. Including Gear Box, Gear Box Housing, cylinder 22.58

MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

6 Ram mandir RYJUN17006 Rej. Stainless Steel Plate 2.53 MT 12.50

% 18% 5.5% 1% RS.100/- PER

10 Working

Mr. AlokeRanjan/

7763807839/

Page 12 of 19

http://203.197.123.30/vgps/


yard, 2nd Floor, Jsr

MT

Days from the

D/O date

Mr. SourabhAnand 7763807084

7 Ram mandir

yard, 2nd Floor, Jsr RYJUN17007 Rej. Panels 5.22

MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

8 Ram mandir

yard, 3rd Floor, Jsr RYJUN17008 Rej. Dismantled Chute (MS) 16.28

MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

9 Ram mandir

yard, 1st Floor, Jsr RYJUN17009 Rej. Looper Roll 12.49

MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

10 Ram mandir

yard, 3rd Floor, Jsr RYJUN17010 Rej. Pinch Roll with stand 7.16

MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

11 MRD,LD2

Ram mandir


RYMAY17003 Rej. Aluminium Scrap 1.34 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

12 RMBB2

Ram mandir


RYMAY17006 Rej. Beater head Arms 3.97 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

13 LD1-2-3 Ram mandir

yard, 3rd Floor, Jsr

RYMAY17009 Rej. Lance pipe 79.87 MT 12.50%

18% 5.5% 1% RS.100/- PER

MT

10 Working

Days from the

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

Page 13 of 19


D/O date

14 WRP, LD2

Ram mandir


RYMAY17010 Rej. Transformer (Site to be cleared) 5 MT 12.50

% 18% 5.5% 1%RS.100/

- PER MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

15CRM, MR & SPP

Ram mandir


RYMAY17011

Rej. Gear box assembly (Machine Part) including rope pulley, pump, cylinder, roll chok.

42.73 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

16 WRS, CP

Ram mandir


RYMAY17014 Rej. Bogie frame (MS) 14.29 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

17 Pillet Plant

Ram mandir


RYAPR17004 Rej. & Scrap Aquastic 11.40 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

18MR&SPP, Mlill< A to F BF

Ram mandir


RYAPR17006

Rej.& Scrap M/C Part including rope pulley, pinion, Crain girder, gear box, flude coupling etc.

39.01 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

19HSM,

MR&SPP, MED

Ram mandir


RYAPR17012 Rej.& Scrap M/C Part 53.21 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

20G

Furnace, R&D< CRM

Ram mandir


RYAPR17013

Rej.& Scrap M/C Part including lathe machine, shaper machine, press machine &accessories excluding plastic, fiber

30.48 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

Page 14 of 19


21 cp

Ram mandir


RY04170001 Rej. S.S Cone(Qty. as on eyes estimation) 2 MT 12.50

% 18% 5.5% 1%RS.100/

- PER MT

10 Working

Days from the

D/O date

Mr. Aloke Ranjan/ Mr.

Sourabh Anand

7763807839/

7763807084

22 RAMY

Ram mandir


RY03170007

Rej. & Scrap Motor Inc Loose Stator &Rotor with/without winding, tonnage on eye estimation

15 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

23MRD

COPPER GODOWN

MRD0117006 Rej. Copper Chip without bag 2 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. AlokeRanjan/

Mr. SourabhAnand

7763807839/

7763807084

24 MRD Tubes Division JUNE/17/01 Rej. Mechanical Item, entire

materials to be lifted 5 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. Kujur 9431521856

25 MRD Tubes Division JUNE/17/02 Rej Electrical Item, entire


RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. Kujur 9431521856

26 MRD Tubes Division JUNE/17/04

Rej Corrugated Sheet (Incl Small pcs, broken and folded condition )

7 MT Nil 18% 5.5% 1%RS.100/

- PER MT

10 Working

Days from the

D/O date

Mr. Kujur 9431521856

27 MRD Tubes Division JUNE/17/05 Rej Nylon Rope 3 MT 12.50

% 12% 5.5% 1%RS.100/

- PER MT

10 Working

Days from the

D/O date

Mr. Kujur 9431521856

Page 15 of 19


28 MRD Tubes Division JUNE/17/06 Rej Poly Popline Sling 3 MT 12.50

% 18% 5.5% 1%RS.100/

- PER MT

10 Working

Days from the

D/O date

Mr. Kujur 9431521856

29 MRD Tubes Division JUNE/17/07 Rej Wood, entire materials to

be lifted 10 MT Nil 5% 5.5% 1%RS.100/

- PER MT

10 Working

Days from the

D/O date

Mr. Kujur 9431521856

30 MRD Tubes Division JUNE/17/08 Rej Saw Cutter Blade 2 MT 12.50

% 18% 5.5% 1%RS.100/

- PER MT

10 Working

Days from the

D/O date

Mr. Kujur 9431521856

31MRD Tubes

Division, Bin no-6

JUNE/17/09

Light Melting scrap consist of pipe psc, Iron Rod ,window Grill and loose scrap including boulders, entire materials to be lifted

50 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. Kujur 9431521856

32MRD Tubes

Division, Bin no-4

JUNE/17/10

Light Melting scrap consist of pipe psc, Iron Rod ,window Grill and loose scrap including boulders, entire materials to be lifted

60 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. Kujur 9431521856

33 MRD Tubes Division JUNE/17/11 Rej. Steel Furniture entire


RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. Kujur 9431521856

34 Inside 33/6.6KV L-Town

Substation-Near

Blower House-6

LT-170601 Rej. Miscellaneous MS Scrap including Rod excluding cable & wire. Entire materials to be liftedLoading charges to be paid by customers to the company approved vendor @ PMT

10 MT 12.50%

18% 5.5% 1% Loading charges

to be paid by

customers to the compan

y

10 Working

Days from the

D/O date

Mr. Subhashis Ghosh

9204786952

Page 16 of 19


approved vendor @ PMT

35

Inside 33/6.6KV L-Town

Substation-Near

Blower House-6

LT-170602

Rej. Control Cable excluding aluminium cable, entire materials to be lifted.Loading charges to be paid by customers to the company approved vendor @ PMT

2 MT 12.50% 18% 5.5% 1%

Loading charges

to be paid by


y approved vendor @ PMT

10 Working

Days from the

D/O date

Mr. Subhashis Ghosh 9204786952

36


Substation-Near

Blower House-6 LT-170603

Rej. Al. Cable excluding copper cable, entire materials to be liftedLoading charges to be paid by customers to the company approved vendor @ PMT

10 MT 12.50% 18% 5.5% 1%

Loading charges

to be paid by



10 Working

Days from the

D/O date


37


Substation-Near

Blower House-6

LT-170604

Rej. ACSR Conductor wire, entire materials to be liftedLoading charges to be paid by customers to the company approved vendor @ PMT

1 MT 12.50% 18% 5.5% 1%

Loading charges

to be paid by



10 Working

Days from the

D/O date


38 River Pump House

RPH-170301

Rej. Stator and Rotor of 840 HP Slipring Motor (5nos)Entire materials to be liftedLoading & Safety Supervision by department.

20 MT 12.50% 18% 5.5% 1% Self

Loading

10 Working

Days from the

D/O date

Mr. Satyajit Chakrabarty 9234650943

39 River Pump House

RPH-170302 Rej. Gate valve, BR Valve, 5 MT 12.50%

18% 5.5% 1% Self Loading

10 Working

Mr. Satyajit Chakrabarty

9234650943

Page 17 of 19


NRV impellor & attached non ferrous if any, entire materials to be liftedLoading & Safety Supervision by department.

Days from the

D/O date

40 River Pump House RPH-170303

Rej. RubberLoading & Safety Supervision by department.

1 MT 12.50% 18% 5.5% 1% Self

Loading

10 Working

Days from the

D/O date


41 River Pump House

RPH-170304

Misc Scrap of MS/CI/GI etc excluding fiber & wood, cutting allowed for truck load facility, loading will start from one side, entire materials to be liftedLoading & Safety Supervision by department.

50 MT 12.50% 18% 5.5% 1% Self

Loading

10 Working

Days from the

D/O date


42 River Pump House RPH-170305

MS Misc entire materials to be liftedLoading & Safety Supervision by department.

2 MT 12.50% 18% 5.5% 1% Self

Loading

10 Working

Days from the

D/O date


43 IM Section TGS IM-170403

Rej. CSCL equipments, MS. Entire material to be lifted/cutting allowed.

15 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. Ramesh Kumar Rai 8092000652

44 IM Section TGS

TGS-170303

Rej. Calcium Silicate pipe insulation Loading and Safety Supervision by IM section at TGS location

21 MT 12.50% 18% 5.5% 1%

RS.100/- PER

MT

10 Working

Days from the

D/O date

Mr. Ramesh Kumar Rai 8092000652

45 EqMS CSS(E)EQMS170402 Rej. & Scrap Lifter (Electrical

Drive Hydraulic Lifter Make- DBXT) Company loading free

1 No 12.50% 18% 5.5% 1%

Company

loading

10 Working

Days

Mr. Rajeev Shukla /

Mr. A.K. Singh

7033094985 /

9031355601

Page 18 of 19


of cost. free of cost

from the D/O date

Page 19 of 19