Assembly Instruction

Customer ServiceTel/Fax: 281.500.9372Toll Free: 773.299.8111 (Mon - Fri 9am - 5pm)Email: support@furinno.com

Install Square Leg(5)on Panel(B)with Screw(2).

STEP 6

Approx. 30 minutes

Recomm. 2 Person

Tools Required

Attach Bottom Panel(B) to assembled unit with Screw(1).

STEP 7

Unfold the Bin(9)and slide into the storage.

STEP 9

Upright the unit.Attach Back Panel(H)to the back sidewith Power Pin(6).

STEP 8

WARNING:>This unit has been designed to support themaximum loads shown. Exceeding theseload limits could cause sagging, instability,product collapse, and/or serious injury.

>DO NOT allow children to climb on unit.

>Put heavier items on lower shelves.

(6)x16pcs

(1)x6pcs

(2)x12pcs(5)x4pcs

(9)x4pcs

Furinno Multipurpose Storage Cabinetwith 4 Bin-Type Drawer

1115920140325(2)

MODEL : 11159 23.6”(W) x 33.1”(H) x11.8 ”(D)DIMENSION :

its Space. its Budget

www.furinno.com

15

*Unit in Pound(lbs)

5

5

1

2

3

4

5

6pcs

12pcs

2pcs

18pcs

16pcs

4pcs

A

B

C

D

E

1pcs

1pcs

1pcs

1pcs

1pcs

6

Long Screw

Short Screw

Long Plastic Dowel

Short Plastic Dowel

Square Leg

Power Pin

Top Panel

Bottom Panel

Left Side Panel

Right Side Panel

Center Panel

USEFUL HINTS BEFORE YOU START:1. Read each step carefully before starting.

2. It is important that each step is performed in correct order to avoid difficulties.

3. Identify, sort and count the parts before assembly.

4. Assemble your furniture on packaging cardboard to prevent scratch or damage.

5. Clean the product with mild cleanser using soft damped cloth. Do not use harsh or abrasive cleanser.

6. Using uncompatible hardware might cause damage to product.

Insert Dowel(4) to Panel(G1)(G2)(G3).Insert Dowel(3)&(4)to Panel(F).

Insert Cam-Lock Nut(7)and Dowel(4)into Panel(C)(D)(E).**Arrow on Cam-Lock Nut should be pointing toward hole.**

Attach Shelf Panel(G)to Panel(C)&(E).Attach Panel(F)to Panel(E)&(D).

STEP 3

STEP 1

STEP 2

Screw Cam-Lock Screw(8)into the pre-drilled holes on Panel(A).

Attach assembled unit to Panel(A)andtighten Cam-Lock Nut(7) using phillips screwdriver.

STEP 5STEP 4

F

GG

H

1pcs

3pcs

2pcs

Short Shelf Panel

Long Shelf Panel(G1)(G2)(G3)

Back Panel

7

8

6pcs

4pcs

6pcs

9

Cam-Lock Nut

Cam-Lock Srew

Bin

(6)x2pcs

No Hardware List Qty No QtyParts List

(8)x6pcs