Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Wall Mount
Step by Step Installation Instructions
Wood Cornices
1 2smithandnoble.com 800.248.8888
Table of Contents
Step 1 - Getting Started (Parts & Tools) . . . . . . . . . . . . . . . . 3
Overview - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Step 2 - Cornice with Keystone Assembly
Attaching the Keystone . . . . . . . . . . . . . . . . . . . . . . 5
Step 3 - Attaching your Brackets – Outside Mount . . . . . . 5
Attaching your Brackets – Inside Mount . . . . . . . . 6
Optional - Care & Cleaning . . . . . . . . . . . . . . . . . . . Back Cover
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover
A Smooth Set-UpWe want you to love your new Cornice and that includes
having a smooth installation experience . If you encounter
any difficulties or questions, please reach out to us for
help . It’s why we’re here . Call us at 800 .248 .8888 or visit
www .smithandnoble .com/knowhow for more info on installation .
We recommend you hold on to all packaging until your
hardware is fully installed . Should something go wrong (we
strongly doubt it), we want any potential returns to be a
painless as possible .
Customer Service Hours Monday — Friday: 6am — 7pm PT Saturday — Sunday: 7am — 4pm PT
smithandnoble.com
EverythingYou Need
3 4smithandnoble.com 800.248.8888
Getting Started
PENCIL & SCREWDRIVER (NOT INCLUDED) POWER DRILL & LEVEL (NOT INCLUDED)
SCREWS & WING NUT(Wing Nut for Keystone only)
Step 1 — Parts & Tools
WALLBOARD OR PLASTER: Hollow wall applications: Use a secure fastener designed specifically for this purpose.
METAL: Prepare by pre-drilling holes and then using the included screws .
CONCRETE, STONE, BRICK OR TILE: Use a masonry drill and surface-specific plugs, anchors, or screws . When selecting a fastener be sure it’s designed to support the weight of the product being installed (if you’re not sure, either give us a call or ask a professional at your local hardware store). Once obtained, follow the fastener manufacturer’s instructions regarding proper installation.
TOOLS YOU WILL NEED TO INSTALL YOUR HARDWARE: Pencil, screwdriver, ¼" nut driver, level, and a drill with a 7⁄64" drill bit.
Note: It’s important to monitor the amount of pressure you apply when using a drill. If the screws are too tight this may cause the screw itself to break off in the wall or window frame.
MOLLY BOLT
SELF DRILLINGANCHOR
TOGGLE BOLT
Before you begin, check the accompanying diagram to make sure you have all the parts you need . You’ll need to make sure the surface you intend to install your hardware is sturdy enough to accommodate the brackets . If you’re screwing directly into a surface this means locating wood studs that are strong enough to securely bond with the included screws. Otherwise, you’ll need to use a secure fastener (as illustrated) but please note this piece is not included .
MOUNTING BRACKET
MOUNTING BRACKET
Standard Cornice
Cornice with KeystoneStandard on cornices wider than 60"
MOUNTING BRACKET
Overview
(2X) VALANCE JOINERS (4X) BALLASTS
RETURN SCREWS
URBAN INSTRUCTIONS1. PARTS LIST
3. VALANCE ASSEMBLY2. RETURN ASSEMBLY
(2X) URBAN SPLICEFOR VALANCES OVER 106”
SUPPORT BRICKS
URBAN 5 HARDWARE URBAN 3 HARDWARE
5⁄8”2⁄3”
2⁄3”¾
”
1½”
5 6smithandnoble.com 800.248.8888
Step 2 — Cornice with Keystone Assembly
Attaching the Keystone
Turn both sides of the cornice and the keystone over onto their face and lay on a flat surface. Slide the keystone onto one side of the cornice as shown at right .
Attach the keystone to the cornice with the screws or wing nut and bolt provided .
Step 3 — Attaching Your Brackets — Outside Mount
Attaching Brackets – Outside Mount
Center the cornice over the window opening . Mark the position of the ends of the inside of the cornice box on the wall . Attach the mounting brackets to the wall 3" in from the marks at the desired height . Make sure the mounting brackets are level with one another .
Set the cornice on top of the brackets . Center the cornice over the window and push the cornice back against the wall . Attach the cornice with short screws provided .
thank you for purchasing from Smith+Noble.Your newcornice has been custom-crafted to your exact dimensionsfrom the highest quality materials. Once installed, it will provide you with a lifetime of beauty and trouble-free use.
installing your new cornice is easy. Simply follow our step-by-step instructions.We recommend that you read throughall the instructions before you start. If you have questions, our customer service representatives are available from 5am to 7pmMon-Fri or 7am to 4pm Sat-Sun Pacific Time at 800.780.8889.
getting startedremove the cornice from the packaging.
Do not dispose of packaging until the cornice is installed to your satisfaction.
Check the diagram to make sure you have all the parts indicated for the appropriate type of installation.
tools you may need to install your cornice: pencil, screwdriver,1⁄4" nut driver, level, pliers and a drill with 7⁄64" drill bit.
Your brackets must be securely attached to the mounting surface.When screwing into a surface, the included screws must hit woodstuds. Otherwise, use a secure fastener as illustrated (not included).
wallboard or plaster: Use a secure fastener designed for hollow wall applications.
metal: Pre-drill holes and use the included screws.
concrete, stone, brick or tile: Use a masonry drill andappropriate plugs, anchors or screws.
*When selecting a fastener, make sure it is designed to supportthe weight of the product being installed. Follow the fastenermanufacturer’s instructions for proper installation of the fastener.
For assistance, call Smith+Noble�customer service at�800.780.8889�
5am to 7pm, Mon-Fri or �7am to 4pm, Sat-Sun Pacific Time.�
Visit our web site at�smithnoble.com
note: When installing screws with a drill,be careful not to overtighten.This maycause the screw to break off in the wall or window frame.
STE P 1 Your New Cornice
MOUNTING BRACKET
KEYSTONEStandard on cornices
wider than 60"
cornice with keystone
WING BOLTS
Turn both sides of the cornice and the keystone over onto their faceand lay on a flat surface. Slide the keystone onto one side of the cor-nice as shown above.When assembled, the dustcover top of the corniceshould be in the channel in the back of the keystone and the boltholes in the keystone and in the back of the cornice should align.
standard cornice
Attach the keystone to the cornice with the wingbolts provided.
Follow the same procedure to attach the second side of the cornice.
Assembly is complete. Proceed to Step 3.
Center the cornice over the window opening. Mark the position of the ends of the cornice inside the box on the wall. Attach themounting brackets to the wall 3" in from the marks at the desiredheight. Make sure the mounting brackets are level with one another.
Set the cornice on top of the brackets. Center the cornice over the window and push the cornice back against the wall. Attach the cornice with the short screws provided.
STE P 2 Cornice with Keystone Assembly
STE P 3 Attaching Your Bracket - Outs ide Mount
STE P 2A Attaching the Keystone
STE P 2B Attaching Second Side
STE P 2C Assembled Cornice
STE P 3a Mounting the Cornice
For outside mount cornices, proceed to step 3.For inside mount cornices, proceed to step 4.
molley bolt
self drillinganchor
toggle bolt
screws(included)
wingbolt
MOUNTING BRACKET
WW-Cornice_06_ 1/25/07 9:40 AM Page 1
Step 3 — Attaching Your Brackets — Inside Mount
Attaching Brackets – Inside Mount
Align the top of the mounting bracket with the cornice and attach using the short screws provided through the top hole in each mounting bracket only . The brackets should be positioned 4" in from the ends of the cornice . Additional brackets should be spaced equally between the two end brackets .
Align the front edge of the cornice with the front edge of the window opening .
Hold the cornice in place and attach the cornice with the screws provided .
NOTE: When operating blinds or shades under a cornice, make sure the controls for the product are not making contact with the cornice . This will cause damage to the cornice and the blind or shade .
3"
© 2016 Smith & Noble Home, Inc. All Rights Reserved SN0416
Warranty Service
The enjoyment of your Cornice should be everlasting, which is why our products come with a limited lifetime warranty . The warranty applies to the original owner, requires a proof of purchase (hang on to your receipt!) and covers defects in material or craftsmanship . Hardware must have been properly installed . We reserve the right to determine if your hardware warrants a repair or a replacement . Visit smithandnoble.com/guarantee to see full details . In need of warranty service? Call us at 800.248.8888 and we’ll arrange for a repair or replacement ASAP .
Care & Cleaning
Minimal care and cleaning is needed to maintain the beauty of your cornice . Occasional light vacuuming with a soft bristle attachment or gentle feather dusting is all that is required to keep your cornice looking fresh and neat.
Care & Cleaning