Upload
ngotruc
View
215
Download
1
Embed Size (px)
Citation preview
BIT’s 3rd
Step towards a Ubiquitous Smart Future
BIT’s 3rd
Annual World Congress of
Materials-
Time: March 16
Place: AVANI Riverside Bangkok Hotel
Highlights of WCSM-201
� 500+ Oral Presentations Covering the
Cutting-edge Technology in the Whole Field of
Materials
� 50+ Exhibitors Showcasing the Emerging New Products
and Technologies to an Audience of over
� 100+ Posters Demonstrating
� Cutting-edge Keynote Addresses by Prominent Leade
from All over the World
� Creating a Harmonious Environment for Project
Matchmaking and Promotion
� Opportunities to Visit Thailand
Landscapes
Register online at:
http://www.bitcongress.com/wcsm2017/Register.asp
Contact Us:
[email protected] or [email protected]
Tel: 0086-411-84799609-814
rd Annual World Congress of Smart Materials
Step towards a Ubiquitous Smart Future
Annual World Congress of Smart
-2017
16-18, 2017 AVANI Riverside Bangkok Hotel, Thailand
Hosting Organization
BIT Group Global Ltd.
Supporting
Thailand Convention & Exhibition
The Thai Ceramic Society
Contributions Wanted
SENSORS & TRANSDUCERS
International Journal of Heat and
2017
+ Oral Presentations Covering the Hot Topics and
edge Technology in the Whole Field of Smart
50+ Exhibitors Showcasing the Emerging New Products
and Technologies to an Audience of over 500 People
edge Keynote Addresses by Prominent Leaders
Creating a Harmonious Environment for Project
Thailand’s Natural and Cultural
http://www.bitcongress.com/wcsm2017/Register.asp
con.com
Hosting Organizations
BIT Group Global Ltd.
Supporting Organization
Thailand Convention & Exhibition
Bureau
The Thai Ceramic Society
Contributions Wanted
SENSORS & TRANSDUCERS
International Journal of Heat and
Technology
Welcome Message
Dear Friends and Colleagues,
On behalf of the Organizing Committee of BIT’s
Annual World Congress of Smart Materials
(WCSM-2017), we cordially invite you to participate in
this initiative congress.
WCSM-2017 will be held at Thailand
2017. It is intended to provide a platform for professionals
around the world to exchange state-of
development and identify research needs and opportunities
in this emerging field. And it is the Asian Branch of
WCAM (World Congress of Advanced Materials).
Smart materials are one of the most important researching
directions in development of High
Their properties can react to reversible changes in their
environment by an external condition. Smart
help in removing the boundaries between structural and
functional materials, which may result in significant
revolution in materials science development. Based on its
significance, WCSM will bring about enormous benefits as
well as open up a new and broader pathway for
information and experience exchange all over the world.
The 3rd WCSM-2017 plans to shoot for
presentations in breaking research of
Science and Technologies, Properties Characterization of
Smart Materials, Piezoelectric Materials, Magnetostrictive
Materials & Electrostrictive Materials, Smart Fluid,
Hydrogels and Phase Change Materials, Shape
Alloys & Shape-Memory Polymers, Luminescent,
Chromogenic Smart Materials, Smart Biomaterials, Smart
Nanomaterials, other Smart Materials and Industrial
Symposia. More than 500 world
academicians, senior scientists, industry executives and
project leaders from 50+ countries
address the topics, issues, best practices and trends
necessary to make the right decisions to guide their
business strategies, and future science and technology
direction.
Based on the huge success of last event of WCSM
Welcome Message
On behalf of the Organizing Committee of BIT’s 3rd
Congress of Smart Materials-2017
), we cordially invite you to participate in
Thailand during March 16-18,
. It is intended to provide a platform for professionals
of-the-art research and
development and identify research needs and opportunities
in this emerging field. And it is the Asian Branch of
(World Congress of Advanced Materials).
Smart materials are one of the most important researching
directions in development of High-tech new materials.
Their properties can react to reversible changes in their
environment by an external condition. Smart materials
help in removing the boundaries between structural and
functional materials, which may result in significant
revolution in materials science development. Based on its
significance, WCSM will bring about enormous benefits as
and broader pathway for
information and experience exchange all over the world.
plans to shoot for 500+ oral
presentations in breaking research of Smart Materials
Science and Technologies, Properties Characterization of
Piezoelectric Materials, Magnetostrictive
Materials & Electrostrictive Materials, Smart Fluid,
Hydrogels and Phase Change Materials, Shape-Memory
Memory Polymers, Luminescent,
Chromogenic Smart Materials, Smart Biomaterials, Smart
als, other Smart Materials and Industrial
00 world-renowned experts,
academicians, senior scientists, industry executives and
will get together to
address the topics, issues, best practices and trends
necessary to make the right decisions to guide their
business strategies, and future science and technology
Based on the huge success of last event of WCSM-2016,
we are strongly confident WCSM
a great success and meet our expectations.
Sincerely Yours,
Executive Chair
Xiaodan Mei, Ph.D.
Executive Chair of WCSM
President, BIT Group Global Ltd.
Honorary Chairman
Dr. Pichai Sonchaeng,
Director, Office of Innovation
Burapha University, Thailand
are strongly confident WCSM-2017 will be
a great success and meet our expectations.
Xiaodan Mei, Ph.D.
Executive Chair of WCSM-2017
BIT Group Global Ltd.
Dr. Pichai Sonchaeng,
Director, Office of Innovation Development,
Burapha University, Thailand
Media
Partners
Theme: Step towards a Ubiquitous Smart Future
Smart Materials-2017
Time: March 16-18, 2017
Venue: Bangkok, Thailand
Part 1: Opening Ceremony
Part 2: Smart Material Summit
Module 1: Frontiers in Smart Materials Science & Technology
Theme 101: Sensing and Information Processing
Theme 102: Actuators and Motors
Theme 103: Breaking Research of Smart Materials Science and Technologies
Theme 104: Next Generation MEMS, NEMS and Array Technologies
Theme 105: 3D Printing Technologies
Theme 106: Smart Material Design, Modeling, Synthesis and Processing
Theme 107: Smart Control Technologies
Module 2: Smart Nanomaterials
Theme 201: Nanotube and Nanowire
Theme 202: Nanoparticles and Nanopowders
Theme 203: Smart Nano Crystalline Materials
Theme 204: Nano Thin Films
Theme 205: Smart Quantum Dots
Theme 206: Microtech and Nanotechnology
Theme 207: Nanocomposite and Bionanocomposite
Theme 208: Nanomedicine
Theme 209: Nanodevices and NanoSystems
Theme 210: Nanocatalysis
Theme 211: Nano-Spintronics
Theme 212: Development of MAX phases, MXenes and other related 2D material
Module 3: Smart Biomaterials
Theme 301: Tissue Engineering Biomaterials
Theme 302: Medical Ceramic, Plastics and Polymers
Theme 303: Medical Imaging Materials
Theme 304: Materials for Disease Diagnosis
Theme 305: Biomimetic Materials
Theme 306: Materials for Pharmacy Product and Drug Delivery
Theme 307: Materials for Medical Devices
Theme 308: Bioconjugates
Theme 4: Smart Optical, Electronic Materials
Theme 401: Dielectric Materials
Theme 402: Electronic components
Theme 403: Optoelectronic Materials
Theme 404: Magnetic Materials
Theme 405: Semiconductors and Superconductors
Theme 406: Piezoelectric and Ferroelectric Materials
Theme 407: Insulating material
Theme 408: Smart Optical Materials
Theme 409: Laser Materials
Theme 410: Printed Electronics
Theme 411: Photonic Crystals
Theme 412: Claytronics
Theme 413: Magnetostrictive Materials
Theme 414: Electrostrictive Materials
Theme 415: Thermoelectric Materials
Theme 416: Nanoelectronics and Molecular Electronics
Theme 417: Nano-Optics, Nano-Photonics and Nano-Optoelectronics
Module 5: Smart Fluid, Hydrogels and Phase Change Materials
Theme 501: Smart Magnetorheological and Electro-magnetorheological Fluid
Theme 502: Smart Polymer Hydrogels
Theme 503: Smart Low Molecule Organogel
Theme 504: Smart Phase Change Materials
Module 6: Smart Composite Materials
Theme 601: Smart Metals
Theme 602: Carbon, Graphite, Fullerenes and Graphene Technologies
Theme 603: Smart Glass and Ceramics
Theme 604: Smart Polymers
Theme 605: Smart Rubber, Elastomers and Fiber Materials
Theme 606: Smart Coating, Painting and Adhesives
Theme 607: Shape-Memory Materials and Composites
Theme 608: Smart Catalytic Materials
Module 7: Other Smart Materials
Theme 701: Smart Optical Fiber
Theme 702: Smart Self-healing and Self-cleaning Materials
Theme 703: Polymorph Materials
Theme 704: Liquid Crystal Polymers
Theme 705: Smart Chromogenic Materials
Module 8: Characteristic Analysis of Smart Materials
Theme 801: Materials and Surface Science
Theme 802: Tribomechanics of Materials
Theme 803: Mechanical and Physical Behavior of Materials
Theme 804: Analytical Technologies and Method of Smart Materials
Theme 805: Magnetic Properties of Smart Materials
Theme 806: Optical Properties of Smart Materials
Theme 807: Thermal Properties Smart Materials
Theme 808: SPM Technologies & Atomic Force Microscope (AFM)
Theme 809: Structural Health Monitoring
Module 9: Applications of Smart Materials
Theme 9-1: Smart Materials for Energy and Environment
Theme 9011: Smart Materials for Energy Harvesting/Conversion/Production/Transistors
Theme 9012: Smart Materials for Energy Storage and Saving
Theme 9013: Materials for Solar Energy and Solar Microgrids
Theme 9014: Smart Materials and Devices for Bioenergy
Theme 9015: Smart Materials for Environment
Theme 9016: Smart Materials for Smart Grid
Theme 9017: Smart Materials for Carbon Capture, Transportation and Storage
Theme 9-2: Smart Materials for IT & ICT
Theme 9021: Smart Display and Imaging Technology
Theme 9022: Smart Light-Responsive Materials for IT and ICT
Theme 9023: Smart Materials for Integrated Circuit Technology
Theme 9024: Smart Materials in Transmission Systems & Wireless Communication
Theme 9025: Smart Materials in Mobile Devices and Cellular Phones
Theme 9-3: Other Applications of Smart Materials
Theme 9031: Smart Materials for Automation and Robotics
Theme 9032: Smart Materials for Automotive, Military, Defense and Aerospace
Theme 9033: Smart Materials for Textile and Chemical Industry
Theme 9034: Smart Materials for Mechanical, Welding and Metallurgical Industry
Theme 9035: Smart Materials for Smart Home
Theme 9036: Smart Materials in Construction and Infrastructure
Theme 9037: Smart Packaging- Smart Tags, Codes and Sensors
Module 10: Young Investigator Forum
Past Event Report
Past Event-WCSM-2016
The WCSM-2016 successfully held in Grand Copthorne Waterfront Hotel on March 4-6, 2016. The theme of
this conference is "Develop New Path of Smartness". Totally, there were nearly 500 participants from more
than 46 countries and areas have attended the WCSM-2015. After the conference many participants
expressed their satisfaction with the content of the congress and had fine memories of Singapore. Depending
on the warmly support and good suggestions from all of the participants, we are quite confident in organizing
WCSM-2017 which would be better and more successful than WCSM-2016. All of us are looking forward to
meeting you again in 2017.
KKeeyynnoottee FFoorruumm
Panel Discussion & Coffee Break
Welcome Banquet
Past Event Report
Past Event-WCSM-2015
BIT’s 1st Annual World Congress of Smart Materials-2015 (WCSM-2015), successfully held in Busan
Exhibition & Convention Center on March 23-25, 2015. The theme of this conference is "Co-creating Dream
of Smartness". Totally, there were nearly 280 participants from more than 24 countries and areas have
attended the WCSM-2015.This annual congress comprised 10 paths following the opening ceremony,
including "Breaking Research of Smart Materials Science and Technologies"; "Properties Characterization of
Smart Materials"; "Piezoelectric Materials"; "Smart Fluid, Hydrogels and Phase Change Materials"; "
Shape-Memory Alloys & Shape-Memory Polymers"…etc. Meanwhile, the Young Scientists Forum is very
successful as well as the exhibition and poster showcase. After the conference many participants expressed
their satisfaction with the content of the congress and had fine memories of Busan.
Analysis of Attendee
By Region By Ttile
Comments on WCSM
Thank you very much for organizing such a fantastic conference in S’pore last week. This conference was
more than expected, and I’m sure many others find the same too.
---- K W Chee, UK
I liked the fluent arrangement of the events with adequate supply from both presentation materials and
food.
----Istvan Halasz, USA
It was a great pleasure to join the Congress as a speaker. Accept my sincere admiration by level and
organization of the Congress.
-----Steve A. J. Jones, Australia
Thank you for inviting me to the conference. I was really honored to be able to present my work in the
conference, and I think you all did a really great job too. I also really enjoyed the food and the half day tour!
----- Yana Mulyana, Japan
Thank you very much for having given me the chance to attend the high quality conference. Frankly, your
organization is quite good which is above the level of most international conferences which I have attended
so far.
----Zong Baoyu, Singapore
Thank you for organizing WCSM and making it a great conference. In my opinion the conference was good
and worth to visit
----Bjorn Senf, Germany
Thank you so much for your heartful message. I enjoyed the conference. We very much appreciate your
careful arrangement for the conference. I would like to participate the next conference in Thailand.
----- George O. Wells, Canada
I really enjoyed the Congress!!! The level is very high and the staff is very attentive and polite. I liked Busan.
It is very modern, beautiful and clean!!
-----Lioudmila A. Matlakhova, Brazil
It was an outstanding conference, and from my side, it went very well, from the organization to the
scientific programme. Congratulations.
-----J. C. Viana, Portugal
Thank you very much for the certificate and congratulation - it was an excellent conference from the
scientific point of view but also very professional organized!
–----Dorota Bociag, Poland
We had a great time in Singapore; we are plan to attend your next conference!
------- Rattaphoom Num Tokongsup, Thailand
List of Renowned Speakers
Dr. Alberto Carpinteri,
Chair, Structural Mechanics,
Polytechnic University of Turin,
Italy
Dr. Reza Abbaschian,
Dean & Distinguished Professor,
Bourns College of Engineering,
University of California, USA
Dr. Sushanta K. Mitra,
Associate Vice-President
Research, York University;
President of Canadian Society for
Mechanical Engineering, Canada
Dr. Masahiro Yamashita,
Professor, Tohoku University, Japan;
Fellow of Royal Society of
Chemistry
Dr. M. Jamal Deen,
Professor, McMaster University,
Canada; President, Academy of
Science, Royal Society of Canada
Dr. Hongsik Jeong,
Vice President, Samsung Electronics;
Research Professor, Yonsei
University, South Korea
Dr. Sommai Pivsa-Art,
Vice President, Rajamangala
University of Technology
Thanyaburi, Thailand
Dr. Guenther Benstetter,
Professor, Dean, Deggendorf
Institute of Technology, Germary
Dr. Siegfried Selberherr,
Dean, Electrical Engineering and
Information Technology,
Technische Universitaet Wien,
Austria
Mr. Ray Gibbs,
Chief Executive Officer, Haydale
Graphene Industries Plc, UK
Dr. Francis Balestra,
Director of Research CNRS,
IMEP_LAHC, Minatec,
Grenoble-Alpes University,
France
Dr. Jerzy Lis,
Professor/ Vice President,
AGH-University of Science and
Technology, Poland
Dr. Dieter Schwarze,
Head, Additive Processes, SLM
Solutions GmbH, Germany
Dr. Alain Claverie,
Director, CEMES-CNRS, France
Dr. Elka Touitou,
Professor, The Hebrew University
of Jerusalem, Israel
Dr. Kirill Monakhov,
Head, Emmy Noether Junior
Research Group, RWTH Aachen
University, Germany
Dr. Mohamed Ichchou,
Director and Group leader, Ecole
Centrale de Lyon – University of
Lyon, France
Dr. Norimichi Kojima,
Emeritus Professor, The University
of Tokyo; Fellow, Toyota Physical
and Chemical Research Institute,
Japan
Dr. A.-Moumen Darcherif,
General Director, ECAM-EPMI
Graduate School of Engineering,
France
Dr. Peng-Sheng Wei,
Xi-Wan Chair Professor, National
Sun Yat-Sen University, Taiwan
Dr. Christian Pedersen,
Head & Group Leader, Technical
University of Denmark, Denmark
Dr. S. I. Nikitenko,
Director, Laboratory of
Sonochemistry in Complex Fluids,
ICSM, France
Dr. Manfred Eich,
Director, Institute of Optical and
Electronic Materials, Hamburg
University of Technology,
Germany
Dr. Jerzy Szpunar,
Tier I Canada Research Chair,
University of Saskatchewan, Canada
Dr. Istvan Toth,
Professor, The University of
Queensland, Australia
Dr. Kandalam Ramanujachary,
Professor, Rowan University, USA
Poster Abstract Grasp your Future @ WCSM-2017
There will be an exhibition of posters at the conference
and the abstracts of accepted posters will be published in
the conference program. You will be notified if your
abstract has been accepted for poster presentation as
soon as it has been reviewed by the organizing
committee. All accepted posters will be presented during
the Poster Viewing Session. Posters will be reviewed for
oral presentation 4-6 weeks prior to the conference. Oral
presenters will be notified by email or telephone at least
3 weeks before the conference. The selected presenters
will be posted on the agenda.
Materials to hang your poster will be available at the
poster area. The set-up time is TBA. You will receive
your poster number 4-6 weeks prior to the conference.
Your presence is recommended during lunches and
coffee breaks for discussion with those who are
interested in your research.
Welcome Banquet
Welcome Banquet is the most symbolic social event of
this year’s conference. It is our expectation that all the
friends present here get to know more including the
aspects of economic, science and technology, education,
culture and so on. Thus the dishes with ethnic and
traditional characteristics are prepared. And the show
with typical traditional culture is presented. The attendees
from all over the world could exchange ideas, share
experiences with each other, and propose valuable advice
to look forward to the future in such a relax, friendly and
harmonious environment. We believe that the smart
materials industry will present us a flourishing future.
Poster Abstracts Format
Posters will be judged during the conference. You are
invited to submit a poster abstract on one of the themes
from the conference for presentation in poster format.
Posters should be based upon original and ongoing
research. Abstracts should be submitted online by
December 31, 2016 to [email protected]
Post-conference Tour
All participants will have the opportunity to join the
post-conference tour in Thailand and bring home with
inspiring ideas and beautiful memories of its sightseeing
spots. The post-conference tour will introduce
participants to Thailand’s beautiful landscape and history
as well as natural wonders. Our designated travel agency
has set up a few tourist routes in Thailand. Please visit
our website http://www.bitcongress.com/wcsm2017 for
more details.
Join Us
Call for Speakers
WCSM-2017 with the theme of “Step towards a
Ubiquitous Smart Future” is intended to provide a platform
for professionals around the world to exchange
state-of-the-art research and development, and identify
research needs and opportunities. And it is the Asian
Branch of World Congress of Advanced Materials.
Smart materials are one of the most important researching
directions in development of High-tech new materials
which may result in significant revolution in materials
science development. Based on its significance, WCSM
will bring enormous benefits as well as a new pathway for
information and experience exchange all over the world.
The 3rd WCSM-2017 plans to shoot for 500+ oral
presentations and more than 500 world-renowned experts,
senior scientists, industry executives and project leaders
from 50+ countries will get together. We are strongly
confident WCSM-2017 will be a great success and we look
forward to your active support and participation.
Call for Conference Sponsorship
WCSM-2017 is one of the most effective international
marketing platforms in the field of advance materials,
which offers a wide range of sponsoring categories for
branding and highlighting your company in order to
achieve the best publicity.
Exhibition Opportunities
A supporting exhibition will be held in conjunction with
the conference enabling companies to exhibit their
products and service in front of a professional audience.
Standard Exhibition Booth include:
� Carpet
� Exhibitor name board
� 2 spot lights per stand
� 1 table
� 2 chairs
� 1 main power socket(230V/1KM MAX)
� 2 Exhibitor passes(Not available for conference
access)
� Listing on NEF website
Call for Media Partnership
WCSM-2017 invites accredited media organizations
working on scientific news to apply for a complimentary
press pass. Press passes are limited and are granted only to
working journalists who intend to report the relevant
events of the conferences.
To qualify for press credentials, you are required to be
affiliated with an internationally, nationally or regionally
recognized media outlet, and hold an editorial title and/ or
hold a position as an industry analyst.
Call for Co-organizers
The SAB is tasked with providing advice on the matter
of science and technology to the conference, guiding its
program and providing overall strategic vision, and
focusing on strengthening the interface between science,
policy and society in areas relevant to smart materials.
On behalf of organizing committee, we sincerely invite
you to join in the Scientific Advisory Board of the 3rd
Annual World Congress of Smart Materials-2017 as one
of the SAB Member.
For Speech Opportunity and Media
Partnership
Ms. Ada Sun and Ms. Snowy Liang BIT Group Global Ltd.
East Wing, 11F, Dalian Ascendas IT Park,
No. 1 Hui Xian Yuan,
Dalian Hi-tech Industrial Zone,
LN 116025, P. R. China
Tel: 0086-411-84799609-814
Fax: 0086-411-84795469
Email: [email protected]
For Exhibitor, Sponsorship and Business
Development
Ms. Amy Guo BIT Group Global Ltd.
BIT Group Global
----Your Think Tank
Tel: 0086-411-84799609-829
Fax: 0086-411-84799629
Email: [email protected]