Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Give us your order, and experience some serious savings. Proven performance, innovative design
and an affordable price – if those weren’t reasons enough to choose Finesse’s reusable bioprocess pH
and DO sensors and transmitters, we’ve just added two others. #1 Our TruDO Optical sensors can be
used instantly without lengthy polarization. There is no electrolyte and the optical elements don’t require
maintenance. TruDO Optical sensors also don’t require a transmitter and can be directly connected to
your controller. #2 Our TruCell2 cell density sensors provide proven measurement performance and
diagnostics for fermentation control, for only the price of a DO loop. Now that is a lot of pennies.
Visit www.finesse.com to learn more about our pH electrodes, DO sensors and cell density loops. Try
Finesse sensors today, and experience some serious savings tomorrow.
A penny saved is a penny earned.”
“– Benjamin Franklin (1706-1790)
TruBio and TruViu are trademarks of Finesse Solutions, LLC.In Europe, call: +41 81 641 20 00
800-598-9515www.finesse.com
Start saving now with Finesse autoclavable sensorsSterilizable
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com17
2010-0420 ContinuedSterilizable Sensors
Sensor Solutions –Sterilizable
Measurement
Cell Density MonitorThe TruCell®2 optical probe measures cell density. All wetted mate-rials are USP class VI compliant. The TruCell2 Transmitter provides a 4–20 mA output, and allows automatic zeroing, temperature com-pensation, diagnostics, curve fitting and probe verification.
Dissolved Oxygen SensorThe TruDO® family of rebuildable dissolved oxygen sensors is designed to be a cost-effective solution with solid performance, greater robustness, and improved reliability.
pH ElectrodeThe TrupH® family of 12 mm pH electrodes is designed to provide an affordable solution with better repeatability and in-creased reliability.
Optical Dissolved Oxygen SensorTruDO® Optical sensors are designed to provide comparable perfor-mance, with no polarization and no electrolyte. These sensors have a built in transmitter.
TrupH
TruDO
TruDO Optical
TruCell2
pH and DO TransmittersOur family of pH and dissolved oxygen transmitters feature full text prompts, menu driven con-figuration, a large backlit LCD display, isolated 4–20 mA out-puts, and optional HART com-munications.
Data LoggingTruData™ Precision Current Loop (4-20mA) and Voltage Data Loggers are convenient and versatile recorders for reliable logging of a wide range of measurement variables. These data loggers enable rapid data transfer via USB.TruData
http://www.finesse.com
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com18
2010-0420 ContinuedSterilizable Sensors
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
TruDO Optical
TruDO Optical Dissolved Oxygen SensorsTruDO® Optical probes solve the problems associated with traditional DO sensors i.e., midrun sensor failure, polarization, leaking electrolyte, broken or poisoned cathodes. The TruDO Optical sensor has one replaceable part, the sensor cap. Unlike a traditional DO sensor, the TruDO sensor cap needs to be replaced very infrequently (every 6 months or so). In side by side tests the sensor tracks traditional DO probes without the need for membrane replacement after every run or two. In addition the probe can be kept in the reactor without maintenance before CIP and left dry without any adverse effects.
Plug and Play TruDO Optical 12mm diameter sensors are designed for plug and play replacement of existing polarographic DO sensors.
T82/D4 Cables Connect your existing DO cable to the TruDO Optical power adapter, attach the TruDO Optical sensor and plug in the power supply. You are ready to go! Follow your normal SOP for calibration and operation.
VP Cables Connect your existing DO cable to the TruDO Optical sensor, then attached the TruDO power supply to the two unused wires on the VP 6.0 cable to power the sensor, plug in the power supply and you are ready to go!
New DO LoopsNo transmitter is required! While the TruDO Optical sensor is designed as a plug and play replacement for traditional polaragraphic DO sensors it can also be used without a transmitter. The reason is that the transmitter is already built into the sensor saving you the cost of a transmitter for every new installation.
4-20 mA Output For customers that want a 4 to 20 mA dissolved oxygen signal output, the TruDO Optical sensor provides this when connected to a VP cable and the TruDO 4-20 mA output adapter.
Featuresg CIP, SIP autoclave
compatible optical dissolved oxygen sensor
g Equal or better performance than traditional DO sensors
g Pressure and damage resistant membrane – up to 12 bar
g Compatible with existing DO transmitters
g 4 ppb to 300% saturation range
D4/T82 Connection
VP 6.0 Connection
http://www.finesse.com
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com19
2010-0420 ContinuedSterilizable Sensors
Digital CommunicationThe other choice is to use the TruDO Optical sensor with digital RS485 ModBus RTU communication e.g.; with TruBio. With this option more information than just the dissolved oxygen reading can be retrieved from the sensor. Additional information includes: duration of use, time at elevated temperature, and cap health. Like the other modes of operation listed above you must supply power to the sensor (7 to 30 VDC). The dissolved oxygen sensor then acts as a slave device and can be used as one of up to 32 devices.
TruDO Optical 12 mm diameter dissolved oxygen sensors provide superior performance, greater repeatability and improved reliability in bioprocess applications such as cell culture and fermentation.
SpecificationsMeasurement Optical phase shift
Range 4 ppb to 300% saturation (dissolved oxygen)
Temperature 0 to 130°C
Pressure 12 bar maximum
Temperature
Compensation
22 kohm thermistor
Wetted materials 316L S.S., USP class 6 silicone
Sensors 12mmDOS-OPT-VP-120
DOS-OPT-VP-160
DOS-OPT-VP-225
DOS-OPT-VP-325
DOS-OPT-VP-425
VP 8.0 Cables CAB-VP8-10, 10 ft/3m
CAB-VP-15, 15ft.5m
Replacement CapDOS-OPT-CAP
Power Adapter for D4/T82 CablesDOS-OPT-PWR-ADT
4-20 mA Output AdapterDOS-OPT-420-ADT
PolarizersNone required
Replacements for 12mm Replaces Broadley-James Model D140/D145
Replaces Mettler-Toledo/Ingold Model InPro 6800
TruDO Optical
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
http://www.finesse.com
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com20
2010-0420 ContinuedSterilizable Sensors
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
TrupH – pH ElectrodesThe TrupH® family of 12 mm pH electrodes is designed for improved performance. The automated manufacturing process results in better repeatability and increased reliability of these electrodes in bioprocess applications such as cell culture and fermentation.
SpecificationsMeasurement Electrochemical
Range 0–14 (2 –12 pH for maximum precision)
Temperature 0–135°C
Pressure 6 bar maximum
Connection Pg 13.5
Temperature
Compensation
Integral Pt100 (VP model)
Electrodes
S8 K8 VP (Pt 100)
PHS-EFP-S8-120 PHS-EFP-K8-120 PHS-EFP-VP-120
PHS-EFP-S8-225 PHS-EFP-K8-225 PHS-EFP-VP-225
PHS-EFP-S8-325 PHS-EFP-K8-325 PHS-EFP-VP-325
PHS-EFP-S8-425 PHS-EFP-K8-425 PHS-EFP-VP-425
Cables
S8 K8 VP
CAB-S8-06, 6 ft (2 m) CAB-K8-06, 6 ft (2 m) CAB-VP-06, 6 ft (2 m)
CAB-S8-10, 10 ft (3 m) CAB-K8-10, 10 ft (3 m) CAB-VP-10, 10 ft (3 m)
Housings (Guarded)HSG-STD-025-G fits 25 mm standard side port
HSG-SFT-025-G fits 25 mm safety side port
HSG-SNY-075-G fits 1½˝ Sanitary Side Port
Housings (Unguarded)HSG-STD-025-U fits 25 mm standard side port
HSG-SFT-025-U fits 25 mm safety side port
BufferPHS-BUF-04, 4.01 pH buffer
PHS-BUF-07, 7.01 pH buffer
PHS-BUF-10, 10.01 pH buffer
Like for LikeS8 K8 VP
Replaces Broadley-
James Model F-635
Replaces Broadley-
James Model F-695
Replaces Broadley-
James Model F-235
Replaces Mettler-Toledo/
Ingold Model DPA
Replaces Mettler-Toledo/
Ingold Model DPAS
Replaces Mettler-Toledo/
Ingold Model InPro 3250
Featuresg Fast response
g Highly repeatable
g Proven reliability
g Suitable for autoclave, SIP and CIP
g Certified “Like for Like” replacement for Broadley-James/ Mettler-Toledo
S8 K8 VP
TrupH
http://www.finesse.com
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com21
2010-0420 ContinuedSterilizable Sensors
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
TrupH K8TrupH® K8 12 mm electrodes are designed for improved performance and reliability in cell culture and fermentation applications. A pH elec-trode includes the reference and sensing electrodes, an optional tem-perature sensor, and an electrical connector (K8). For a given trans-mitter, the pH electrode can be replaced. The pH electrode can be separated from the cable and transmitter for sterilization. Insertion lengths of 120, 225, 325 or 425 mm are available.
SpecificationspH 0 –14 (2 –12 for maximum precision)
Temperature 0 –135°C
Pressure 6 bar maximum
Connection Pg 13.5
ElectrodesPHS-EFP-K8-120
PHS-EFP-K8-225
PHS-EFP-K8-325
PHS-EFP-K8-425
CablesCAB-K8-06, 6 ft (2 m)
CAB-K8-10, 10 ft (3 m)
Housings (Guarded)HSG-STD-025-G fits 25 mm standard side port
HSG-SFT-025-G fits 25 mm safety side port
HSG-SNY-075-G fits 1½˝ sanitary side port
Housings (Unguarded)HSG-STD-025-U fits 25 mm standard side port
HSG-SFT-025-U fits 25 mm safety side port
BufferPHS-BUF-04, 4.01 pH buffer
PHS-BUF-07, 7.01 pH buffer
PHS-BUF-10, 10.01 pH buffer
Like for LikeReplaces Broadley-James Model F-695
Replaces Mettler-Toledo/Ingold Model DPAS
Featuresg Fast response
g Highly repeatable
g Proven reliability
g Suitable for autoclave, SIP and CIP
g Certified “Like for Like” replacement for Broadley-James/ Mettler-Toledo
TrupH
http://www.finesse.com
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com22
2010-0420 ContinuedSterilizable Sensors
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
TrupH S8TrupH® VP 12 mm pH electrodes are designed for improved performance and reliability in cell culture and fermentation applications. A pH electrode includes the reference and sensing electrodes, an optional temperature sensor, and an electrical connector (VP). For a given transmitter, the pH electrode can be replaced. The pH electrode can be separated from the cable and transmitter for sterilization. Insertion lengths of 120, 225, 325 or 425 mm are available.
SpecificationspH 0 –14 (2 –12 for maximum precision)
Temperature 0 –135°C
Pressure 6 bar maximum
Connection Pg 13.5
ElectrodesPHS-EFP-S8-120
PHS-EFP-S8-225
PHS-EFP-S8-325
PHS-EFP-S8-425
CablesCAB-S8-06, 6ft (2m)
CAB-S8-10, 10ft (3m)
Housings (Guarded)HSG-STD-025-G fits 25 mm standard side port
HSG-SFT-025-G fits 25 mm safety side port
HSG-SNY-075-G fits 1½˝ sanitary side port
Housings (Unguarded)HSG-STD-025-U fits 25 mm standard side port
HSG-SFT-025-U fits 25 mm safety side port
BufferPHS-BUF-04, 4.01 pH buffer
PHS-BUF-07, 7.01 pH buffer
PHS-BUF-10, 10.01 pH buffer
Like for LikeReplaces Broadley-James Model F-635
Replaces Mettler-Toledo/Ingold Model DPA
Featuresg Fast response
g Highly repeatable
g Proven reliability
g Suitable for autoclave, SIP and CIP
g Certified “Like for Like” replacement for Broadley-James/ Mettler-Toledo
TrupH
Finesse Solutions, LLC3350 Scott Blvd, Bldg 1 Santa Clara, CA 95054
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
877-204-8644www.finesse.com
http://www.finesse.comhttp://www.finesse.com
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com23
2010-0420 ContinuedSterilizable Sensors
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
TrupH VPTrupH® 12 mm pH electrodes are designed for improved performance and reliability in cell culture and fermentation applications. A pH electrode includes the reference and sensing electrodes, an optional temperature sensor, and an electrical connector (VP). For a given transmitter, the pH electrode can be replaced. The pH electrode can be separated from the cable and transmitter for sterilization. Insertion lengths of 120, 225, 325 or 425 mm are available.
SpecificationspH 0 –14 (2 –12 for maximum precision)
Temperature 0 –135°C
Pressure 6 bar maximum
Connection Pg 13.5
Termperature
Compensation
Integral Pt100
ElectrodesPHS-EFP-VP-120
PHS-EFP-VP-225
PHS-EFP-VP-325
PHS-EFP-VP-425
CablesCAB-VP-06, 6 ft (2 m)
CAB-VP-10, 10 ft (3 m)
Housings (Guarded)HSG-STD-025-G fits 25 mm standard side port
HSG-SFT-025-G fits 25 mm safety side port
HSG-SNY-075-G fits 1½˝ sanitary side port
Housings (Unguarded)HSG-STD-025-U fits 25 mm standard side port
HSG-SFT-025-U fits 25 mm safety side port
BufferPHS-BUF-04, 4.01 pH buffer
PHS-BUF-07, 7.01 pH buffer
PHS-BUF-10, 10.01 pH buffer
Featuresg Fast response
g Highly repeatable
g Proven reliability
g Suitable for autoclave, SIP and CIP
g Certified “Like for Like” replacement for Broadley-James/ Mettler-Toledo
TrupH
http://www.finesse.com
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com24
2010-0420 ContinuedSterilizable Sensors
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
Dual pH/DO TransmitterThe Dual pH/DO Transmitter is designed for the simultaneous measurement of pH and dissolved oxygen (DO) using traditional sensors. These units feature full text prompts, menu driven configuration, large backlit LCD display and two isolated 4–20 mA outputs.
Physical DescriptionCase Material Polycarbonate
Rating NEMA 4X/CSA 4 (IP 65)
Dimensions 6.1˝x 6.1˝x 5.15˝ (155x155x131mm)
Mounting Remote, panel or pipe mounted
Conduit Openings Accepts Pg 13.5 or ½˝ conduit fittings
Display monochromatic, graphic LCD. Backlit.
SpecificationsPower 20– 30 VDC
Output Two isolated 4-20 mA or 0-20 mA.
Continuously adjustable. Linear or logarithmic
Operating Temperature 0 – 55°C (32–131°F)
Storage Temperature 0–60°C (32–140°F)
Relative Humidity 5–95% (non-condensing)
Analog Output Signal Two wire, 4–20 mA output
Fully scalable over sensor range
Output Accuracy +/- 0.05 mA
RFI/EMI EN-50081/EN-50082
Weight/Shipping Weight Approximately 3 lb / 4 lb (1.5 kg / 2 kg)
Warranty Every Dual pH/DO Transmitter is warranted for
one full year (12 months) from date of shipment
against defects in material and workmanship
pH InputMeasurement Range [pH] 0 to 14 pH
Accuracy/Repeatability ±0.01 pH
Stability ±0.01 pH/month, non-cumulative
Temperature
Compensation
Pt100 RTD, Automatic or Manual
0–50°C (32 – 122°F)
Response time (100%) 5 sec
Input filter 4 sec
Dissolved Oxygen (DO) InputMeasurement Range 0–20 ppm (mg/L) dissolved oxygen;
0–250% saturation
Resolution 0.01 ppm; 0.1 ppb for 499A TrDO sensor
(when O2
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com25
2010-0420 ContinuedSterilizable Sensors
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
TrupH Cables TrupH® cables are designed to connect sensors and transmitters with improved performance, better repeatability and increased reliability in bioprocess applications such as cell culture and fermentation. The cables are available with a variety of standard connectors for pH, and are also compatible with sensors made by other manufacturers.
TrupH cables are available with S8, K8 and VP connectors in 6 ft (2 m) and 10 ft (3 m) lengths.
SpecificationspH S8, K8 and VP connectors
Lengths 6 ft (2 m) and 10 ft (3 m)
pH CablesS8 K8 VP
CAB-S8-06, 6 ft/2 m CAB-K8-06, 6 ft/2 m CAB-VP-06, 6 ft/2 m
CAB-S8-10, 10 ft/3 m CAB-K8-10, 10 ft/3 m CAB-VP-10, 10 ft/3 m
Featuresg Optimum
performance
g Designed for high performance
g Compatible with Broadley-James and Mettler Toledo
g Available with S8, K8 or VP connectors
g Lengths of 6ft (2 m) or 10 ft (3 m)
VP 6.0 Connection
S8 Connection
K8 Connection
TrupH
http://www.finesse.com
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com26
2010-0420 ContinuedSterilizable Sensors
TrupH is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
TrupH HousingsTrupH® housings are designed to protect traditional 12 mm pH electrodes when they are used in stainless steel bioreactors or fermentors. These housings are manufactured using 316L stainless steel and only use FDA approved wetted materials (e.g., o-rings). TrupH housings offer a standard PG13.5 threaded insert for the 12 mm sensor and a selection of interfaces with Standard Ingold, B. Braun Safety and Sanitary ports.
SpecificationsWetted Material 316L stainelss steel, Viton o-rings
Sensor Connection Pg 13.5
Port Connections Standard, safety and 1½˝ sanitary
Pressure 6 bar maximum
Insertion Guarded or unguarded
Housings (Side Mount, Guarded)HSG-STD-025-G fits 25 mm standard side port
HSG-SFT-025-G fits 25 mm safety side port
HSG-SNY-075-G fits 1½˝ sanitary side port
Housings (Side Mount, Unguarded)HSG-STD-025-U fits 25 mm standard side port
HSG-SFT-025-U fits 25 mm safety side port
Featuresg Interfaces to
Standard Ingold, B. Braun safety and sanitary ports
g FDA approved wetted materials
g Pg 13.5 threaded insertion for sensors
g Guarded and unguarded designs
g Material certs available
TrupH
Guarded safety, 50mm O-ring position
Guarded standard, 24mm O-ring position
http://www.finesse.com
Solutions for Life
Sensor Solutions
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com27
2010-0420 Continued
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
TruDO – Dissolved Oxygen SensorThe TruDO® family of re-buildable dissolved oxygen sensors is designed for superior performance. The semi-automated manufacturing process results in greater repeatability and improved reliability of these sensors in bioprocess applications such as cell culture and fermentation.
SpecificationsMeasurement Polarographic
Range 10 ppb to 200% saturation
(dissolved oxygen)
Temperature 0 –135°C
Pressure 4 bar maximum
Temperature
Compensation
22 kohm thermistor
Wetted Materials 316L S.S.
Surface Finish Ra 12 (electro-polish)
Sensors 12mmD4/T82 VP
DOS-OFF-D4-120 DOS-OFF-VP-120
DOS-OFF-D4-225 DOS-OFF-VP-225
DOS-OFF-D4-325 DOS-OFF-VP-325
DOS-OFF-D4-425 DOS-OFF-VP-425
Sensors 25mmD4/T82 VP
DOS-STD-D4-070
(Standard Port)
DOS-STD-VP-070
(Standard Port)
DOS-STF-D4-070
(Safety Port)
CablesD4/T82 VP
CAB-D4-06, 6 ft/2 m CAB-VP-06, 6 ft/2 m
CAB-D4-10, 10 ft/3 m CAB-VP-10, 10 ft/3 m
Membrane Replacement KitDOS-MEM-12
PolarizersDOS-POL-D4 (D4/T82)
DOS-POL-VP (VP)
Like for Like 12mmReplaces Broadley-James Model D140/D145
Replaces Mettler-Toledo/Ingold Model InPro 6800
Like for Like 25mmReplaces Broadley-James Model D400/D405/D430/D435
Replaces Mettler-Toledo/Ingold Model InPro 6800
TruDOSterilizable Sensors
12mm25mm
Featuresg Fast response
g Highly repeatable
g Proven reliability
g Suitable for autoclave, SIP and CIP
g Certified “Like for Like” replacement for Broadley-James/ Mettler-Toledo
TruDO
http://www.finesse.com
Solutions for Life
Sensor Solutions
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com28
2010-0420 Continued
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
TruDO 12 mm TruDO® 12 mm sensors are designed for improved performance and reliability in cell culture and fermentation applications. The DO sensor includes an anode, cathode, membrane, electrolyte, and the electrical connector that is connected to the transmitter using a cable (D4 or VP). For a given transmitter, the sensor probe can be replaced. The sensor probe can be separated from the cable and transmitter for sterilization. Insertion lengths of 120, 225, 325 or 425 mm are available.
SpecificationsMeasurement Polarographic
Dissolved Oxygen 0 .1–200% air saturation
10 ppb to saturation
Temperature 0 –135°C
Pressure 4 bar maximum
Temperature
Compensation
22 kohm thermistor
Wetted Materials 316L S.S.
Surface Finish Ra 12 (electro-polish)
SensorsD4/T82 VP
DOS-OFF-D4-120 DOS-OFF-VP-120
DOS-OFF-D4-225 DOS-OFF-VP-225
DOS-OFF-D4-325 DOS-OFF-VP-325
DOS-OFF-D4-425 DOS-OFF-VP-425
CablesD4/T82 VP
CAB-D4-06, 6 ft/2 m CAB-VP-06, 6 ft/2 m
CAB-D4-10, 10 ft/3 m CAB-VP-10, 10 ft/3 m
MembranesDOS-MEM-12
PolarizersDOS-POL-D4 (D4/T82)
DOS-POL-VP
Like for LikeReplaces Broadley-James Model D140/D145
Replaces Mettler-Toledo/Ingold Model InPro 6800
TruDOSterilizable Sensors
Featuresg Fast response
g Highly repeatable
g Proven reliability
g Suitable for autoclave, SIP and CIP
g Certified “Like for Like” replacement for Broadley-James/ Mettler-Toledo
TruDO
http://www.finesse.com
Solutions for Life
Sensor Solutions
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com29
2010-0420 Continued
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
TruDO 25 mm TruDO® 25 mm sensors are designed for improved performance and reliability in cell culture and fermentation applications. The DO sensor includes an anode, cathode, membrane, electrolyte, and the electrical connector that is connected to the transmitter using a cable (D4 or VP). For a given transmitter, the sensor probe can be replaced. The sensor probe can be separated from the cable and transmitter for sterilization. The insertion length is 70 mm, and housing types are standard (D4 and VP) or B. Braun safety (D4 only).
SpecificationsMeasurement Polarographic
Dissolved Oxygen 0 .1–200% air saturation
10 ppb to saturation
Temperature 0 –135°C
Pressure 4 bar maximum
Temperature
Compensation
22 kohm thermistor
Wetted Materials 316L S.S.
Surface Finish Ra 12 (electro-polish)
SensorsD4/T82 VP
DOS-STD-D4-070
(Standard Port)
DOS-STD-VP-070
(Standard Port)
DOS-STF-D4-070
(Safety Port)
CablesD4/T82 VP
CAB-D4-06, 6 ft/2 m CAB-VP-06, 6 ft/2 m
CAB-D4-10, 10 ft/3 m CAB-VP-10, 10 ft/3 m
MembranesDOS-MEM-12
PolarizersDOS-POL-D4 (D4/T82)
DOS-POL-VP
Like for LikeReplaces Broadley-James Model D400/D405/D430/D435
Replaces Mettler-Toledo/Ingold Model InPro 6800
TruDOSterilizable Sensors
Featuresg Fast response
g Highly repeatable
g Proven reliability
g Suitable for autoclave, SIP and CIP
g Certified “Like for Like” replacement for Broadley-James/ Mettler-Toledo
TruDO
http://www.finesse.com
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com30
Continued2011-0322Sterilizable Sensors
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
Featuresg Simultaneous
pH and DO measurement
g Dual isolated 4 – 20 mA outputs
g Real time display of diagnostic measurements
g Available in English, Spanish, French, German and Italian
g Pipe or panel mounted
TruDO
Dual pH/DO TransmitterThe Dual pH/DO Transmitter is designed for the simultaneous measurement of pH and dissolved oxygen (DO) using traditional sensors. These units feature full text prompts, menu driven configuration, large backlit LCD display and two isolated 4–20 mA outputs.
Physical DescriptionCase Material Polycarbonate
Rating NEMA 4X/CSA 4 (IP 65)
Dimensions 6.1˝x 6.1˝x 5.15˝ (155x155x131mm)
Mounting Remote, panel or pipe mounted
Conduit Openings Accepts Pg 13.5 or ½˝ conduit fittings
Display monochromatic, graphic LCD. Backlit.
SpecificationsPower 20– 30 VDC
Output Two isolated 4-20 mA or 0-20 mA.
Continuously adjustable. Linear or logarithmic
Operating Temperature 0 – 55°C (32–131°F)
Storage Temperature 0–60°C (32–140°F)
Relative Humidity 5–95% (non-condensing)
Analog Output Signal Two wire, 4–20 mA output
Fully scalable over sensor range
Output Accuracy +/- 0.05 mA
RFI/EMI EN-50081/EN-50082
Weight/Shipping Weight Approximately 3 lb / 4 lb (1.5 kg / 2 kg)
Warranty Every Dual pH/DO Transmitter is warranted for
one full year (12 months) from date of shipment
against defects in material and workmanship
pH InputMeasurement Range [pH] 0 to 14 pH
Accuracy/Repeatability ±0.01 pH
Stability ±0.01 pH/month, non-cumulative
Temperature
Compensation
Pt100 RTD, Automatic or Manual
0–50°C (32 – 122°F)
Response time (100%) 5 sec
Input filter 4 sec
Dissolved Oxygen (DO) InputMeasurement Range 0–20 ppm (mg/L) dissolved oxygen;
0–250% saturation
Resolution 0.01 ppm; 0.1 ppb for 499A TrDO sensor
(when O2
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com31
2010-0420 ContinuedSterilizable Sensors
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
TruDO
TruDO CablesTruDO® cables are designed to connect sensors and transmitters with improved performance, better repeatability and increased reliability in bioprocess applications such as cell culture and fermentation. The cables are available with a variety of standard connectors, and are also compatible with sensors made by other manufacturers.
TruDO cables are available with D4/T82 and VP connectors in 6 ft (2 m) and 10 ft (3 m) lengths.
SpecificationsDO D4, T82 and VP connectors
Lengths 6 ft (2 m) and 10 ft (3 m)
DO CablesD4/T82 VP
CAB-D4-06, 6 ft/2 m CAB-VP-06, 6 ft/2 m
CAB-D4-10, 10 ft/3 m CAB-VP-10, 10 ft/3 m
Featuresg Optimum
performance
g Designed for high performance
g Compatible with Broadley-James and Mettler Toledo
g Available with D4/T82 or VP connectors
g Lengths of 6ft (2 m) or 10 ft (3 m)
D4/T82 Connection
VP 6.0 Connection
http://www.finesse.com
Solutions for Life
Finesse Solutions, LLC71 Daggett DriveSan Jose, CA 95134
Finesse Solutions AG Via Sogn Gieri 27a CH-7402 Bonaduz Switzerland
800-598-9515www.finesse.com32
2010-0420 ContinuedSterilizable Sensors
TruDO is a trademark of Finesse Solutions, LLC. © Finesse Solutions, LLC, 2011.
TruDO
TruDO HousingsTruDO® housings are designed to protect traditional 12 mm DO sensors when they are used in stainless steel bioreactors or fermentors. These housings are manufactured using 316L stainless steel and only use FDA approved wetted materials (e.g., o-rings). TruDO housings offer a standard PG13.5 threaded insert for the 12 mm sensor and a selection of interfaces with Standard Ingold, B. Braun Safety and Sanitary ports.
SpecificationsWetted Material 316L stainelss steel, Viton o-rings
Sensor Connection Pg 13.5
Port Connections Standard, safety and 1½˝ sanitary
Pressure 6 bar maximum
Insertion Guarded or unguarded
Housings (Side Mount, Guarded)HSG-STD-025-G fits 25 mm standard side port
HSG-SFT-025-G fits 25 mm safety side port
HSG-SNY-075-G fits 1½˝ sanitary side port
Housings (Side Mount, Unguarded)HSG-STD-025-U fits 25 mm standard side port
HSG-SFT-025-U fits 25 mm safety side port
Featuresg Interfaces to
Standard Ingold, B. Braun safety and sanitary ports
g FDA approved wetted materials
g Pg 13.5 threaded insertion for sensors
g Guarded and unguarded designs
g Material certs available
Guarded safety, 50mm O-ring position
Guarded standard, 24mm O-ring position
http://www.finesse.com
Sensor Solutions –Single-useTruFluor DO TruFluor pH TruFluor pH Transmitter TruFluor pH BladeTruFluor pH Validator TruTorr Sensor Solutions –Sterilizable TruDO Optical Dissolved Oxygen SensorsTrupH – pH ElectrodesTrupH K8TrupH S8TrupH VPDual pH/DO TransmitterTrupH Cables TrupH HousingsTruDO – Dissolved Oxygen SensorTruDO 12 mm TruDO 25 mm Dual pH/DO TransmitterTruDO CablesTruDO HousingsTruCell2 ProbeTruCell2 Transmitter TruCell2 Verification KitHardware Solutions (cGMP) TruViu G3 / T700 SystemsTruViu G3mini / T700 Systems TruViu Gas Manifold (6x3)TruLogic DeltaV ControllerWintel MicrocontrollerWintelHardware Solutions (R&D, PD, non-cGMP) TruViu RDPDmini / T300 SystemsTruViu RDPD / T300 SystemsTruViu Gas Manifold (4 x 2)TruLogic DeltaV ControllerWintel MicrocontrollerWintelSoftware SolutionsTruBio DV Bioprocess Control SoftwareTruBio μC Process Control SoftwareTruBio SCADA TruConnect TruConnect Part NumbersService SolutionsTruBio IOQTruTraining