2
 INSTALLATION OF STI MOTION DETECTOR DAMAGE STOPPER ® All specications and information shown were current as of publication and are subject to change without notice. 9618 FEB 2009 Safety Technology International, Inc. 2306 Airport Road • Waterford, Michigan 48327- 1209 Phone: 248-673-9898 • Fax: 248-673-1246 Toll Free: 800-888-4784 • E-mail: info @sti-usa.com Web: www.sti-usa.com Safety Technology International (Europe) Ltd. Unit 49G Pipers Road • Park Farm Industrial Estate • Redditch Worcestershire • B98 0HU • England • Tel: 44 (0) 1527 520 999 Fax: 44 (0) 1527 501 999 • Freephone: 0800 085 1678 (UK only) E-mail: info@sti-europe.com • Web: www.sti-europe.com DRILL (4) .25 in. 6.3mm HOLES 19033 ANCHOR (4) PROVIDED 19020 CLAMP (4) PROVIDED 19013 SCREW 10 x 1.5 in. (4) PROVIDED EXISTING WARNING APPLIANCE DEPTH WIDT  H STI-9618 TOP VIEW STI-9618 FRONT VIEW HEIGHT DEPTH HEIGHT WIDTH STI-9619 TOP VIEW STI-9619 FRONT VIEW 19033 ANCHOR (4) PROVIDED 19020 CLAMP (4) PROVIDED 19013 SCREW 10 x 1.5 in. (4) PROVIDED DRILL (4) 25 in.(6.3mm) HOLES 19033 ANCHOR (4) PROVIDED  19020 CLAMP (4) PROVIDED 19013 SCREW 10 x 1.5 (4) PROVIDED DRILL (4) .25 in. 6.3mm HOLES STI-9620 SIDE VIEW 4.875 in.(124mm) HEIGHT DEPTH STI-9620 END VIEW WIDTH 3.25 in.(83mm)  STI-9618 STI-9619  Model Height Width Depth STI-9618 4.62 in. (117 mm) 5.37 in. (136 mm) 3.0 in. (76 mm) STI-9619 7.75 in. (196 mm) 5.37 in. (136 mm) 5.62 in. (142 mm) STI-9620 6.25 in. (158 mm) 4.0 in. (102 mm) 2.25 in. (57 mm) STI-9621 7.0 in. (178 mm) 5.75 in. (146 mm) 4.5 in. (114 mm) STI-9622 8.75 in. (222 mm) 4.0 in. (102 mm) 3.75 in. (95 mm) INSTALLATION INSTRUCTIONS 1. Center the wire guar d over existing motion det ector . 2. Mark and drill (4) moun ting holes (see pictorial for size).  Lag Bolts - If lag shields and lag bolts are used, make sure anchor is ush with surface. Position guard, insert lag bolt and tighten. Length of bolt should be selected to assure full thread engagement in anchor . 3. For installations that requ ire tamperproof f asteners, order SUB 81 stainless steel  screws and part no. 19038 bit. STI-9620  DRILL (4) .25 in. 6.3mm HOLES 19033 ANCHOR (4) PROVIDED 19020 CLAMP (4) PROVIDED 19013 SCREW 10 x 1.5 in. (4) PROVIDED STI-9621/9622 SIDE VIEW DEPTH STI-9621/9622 END VIEW HEIGHT WIDTH P I R D E T E C T O R DRILL (4) .25 in. 6.3mm HOLES 19033 ANCHOR (4) PROVIDED 19020 CLAMP (4) PROVIDED 19013 SCREW 10 x 1.5 in. (4) PROVIDED STI-9621 STI-9622 Electronic warranty form at www.sti-usa.com/wc14

STI 9618 Installation Manual

Embed Size (px)

DESCRIPTION

Buy the STI 9618 at JMAC Supply!https://www.jmac.com/STI_9618_p/sti-9618.htm?=scribd

Citation preview

  • INSTALLATION OF STI MOTION DETECTOR DAMAGE STOPPERAll specifications and information shown were current as of publication and are subject to change without notice.

    9618 FEB 2009

    Safety Technology International, Inc.2306 Airport Road Waterford, Michigan 48327-1209Phone: 248-673-9898 Fax: 248-673-1246Toll Free: 800-888-4784 E-mail: [email protected]: www.sti-usa.com

    Safety Technology International (Europe) Ltd.Unit 49G Pipers Road Park Farm Industrial Estate RedditchWorcestershire B98 0HU England Tel: 44 (0) 1527 520 999Fax: 44 (0) 1527 501 999 Freephone: 0800 085 1678 (UK only)E-mail: [email protected] Web: www.sti-europe.com

    DRILL (4) .25 in.6.3mm HOLES

    19033 ANCHOR(4) PROVIDED 19020 CLAMP

    (4) PROVIDED

    19013 SCREW10 x 1.5 in.(4) PROVIDED

    EXISTING WARNING

    APPLIANCE

    DEPTH

    WIDTH

    STI-9618 TOP VIEW

    STI-9618 FRONT VIEW

    HEIGHT

    DEPTH

    HEIGHT

    WIDTH

    STI-9619 TOP VIEW

    STI-9619 FRONT VIEW

    19033 ANCHOR(4) PROVIDED

    19020 CLAMP(4) PROVIDED

    19013 SCREW10 x 1.5 in.(4) PROVIDED

    DRILL (4) 25 in.(6.3mm) HOLES

    19033 ANCHOR(4) PROVIDED

    19020 CLAMP(4) PROVIDED

    19013 SCREW 10 x 1.5(4) PROVIDED

    DRILL (4).25 in.

    6.3mm HOLES

    STI-9620 SIDE VIEW

    4.875 in.(124mm)

    HEIGHT

    DEPTH

    STI-9620 END VIEW

    WIDTH

    3.25 in.(83mm)

    DRILL (4).25 in.

    6.3mm HOLES

    19033 ANCHOR(4) PROVIDED

    19020 CLAMP(4) PROVIDED

    19013 SCREW 10 x 1.5 in.(4) PROVIDED

    STI-9621/9622 SIDE VIEW

    DEPTH

    STI-9621/9622 END VIEW

    HEIGHT WIDTH

    PIR

    DETECTOR

    DRILL (4).25 in.

    6.3mm HOLES

    19033 ANCHOR(4) PROVIDED

    19020 CLAMP(4) PROVIDED

    19013 SCREW10 x 1.5 in.

    (4) PROVIDED

    STI-9618 STI-9619

    STI-9621

    Model Height Width Depth

    STI-9618 4.62in.(117mm) 5.37in.(136mm) 3.0in.(76mm)

    STI-9619 7.75in.(196mm) 5.37in.(136mm) 5.62in.(142mm)

    STI-9620 6.25in.(158mm) 4.0in.(102mm) 2.25in.(57mm)

    STI-9621 7.0in.(178mm) 5.75in.(146mm) 4.5in.(114mm)

    STI-9622 8.75in.(222mm) 4.0in.(102mm) 3.75in.(95mm)

    INSTALLATION INSTRUCTIONS1. Centerthewireguardoverexistingmotiondetector.

    2.Markanddrill(4)mountingholes(seepictorialforsize).

    Lag Bolts-Iflagshieldsandlagboltsareused,makesureanchorisflushwithsurface.Positionguard, insert lagboltandtighten.Lengthofboltshouldbeselectedtoassurefullthreadengagementinanchor.

    3.Forinstallationsthatrequiretamperprooffasteners,orderSUB81stainlesssteel screwsandpartno.19038bit.

    STI-9620

    DRILL (4) .25 in.6.3mm HOLES

    19033 ANCHOR(4) PROVIDED 19020 CLAMP

    (4) PROVIDED

    19013 SCREW10 x 1.5 in.(4) PROVIDED

    EXISTING WARNING

    APPLIANCE

    DEPTH

    WIDTH

    STI-9618 TOP VIEW

    STI-9618 FRONT VIEW

    HEIGHT

    DEPTH

    HEIGHT

    WIDTH

    STI-9619 TOP VIEW

    STI-9619 FRONT VIEW

    19033 ANCHOR(4) PROVIDED

    19020 CLAMP(4) PROVIDED

    19013 SCREW10 x 1.5 in.(4) PROVIDED

    DRILL (4) 25 in.(6.3mm) HOLES

    19033 ANCHOR(4) PROVIDED

    19020 CLAMP(4) PROVIDED

    19013 SCREW 10 x 1.5(4) PROVIDED

    DRILL (4).25 in.

    6.3mm HOLES

    STI-9620 SIDE VIEW

    4.875 in.(124mm)

    HEIGHT

    DEPTH

    STI-9620 END VIEW

    WIDTH

    3.25 in.(83mm)

    DRILL (4).25 in.

    6.3mm HOLES

    19033 ANCHOR(4) PROVIDED

    19020 CLAMP(4) PROVIDED

    19013 SCREW 10 x 1.5 in.(4) PROVIDED

    STI-9621/9622 SIDE VIEW

    DEPTH

    STI-9621/9622 END VIEW

    HEIGHT WIDTH

    PIR

    DETECTOR

    DRILL (4).25 in.

    6.3mm HOLES

    19033 ANCHOR(4) PROVIDED

    19020 CLAMP(4) PROVIDED

    19013 SCREW10 x 1.5 in.

    (4) PROVIDED

    STI-9621 STI-9622

    Electronic warranty form at www.sti-usa.com/wc14

  • SMOKE DETECTOR COVERS

    STI-9601 Low profile - Flush mountSTI-9601-SS Low profile - Flush mount -

    Stainless Steel STI-9602 Low profile - Surface mount STI-9604 Mini - Flush mountSTI-9604-SS Mini - Flush mount -Stainless

    Steel STI-9605 Mini - Surface mountSTI-9605-SS Mini - Surface mount -

    Stainless Steel STI-9609 High profile - Flush mount

    STI-9609-SS High profile - Flush mount -Stainless Steel

    STI-9610 High profile - Surface mount STI-9712 Photoelectric - Surface mountSTI-9713 Photoelectric - Flush mount

    BEAM SMOKE DETECTORSSTI-9623 For DS240 and DS241STI-9624 For Fireray 50/100RSTI-9625 For System Sensor Beam

    Smoke Detector 6424STI-9706 Flush MountSTI-9707 Surface Mount

    PIR GUARDSSTI-9618 Corner Mount STI-9619 Corner Mount STI-9620 6.25 x 4 x 2.25 STI-9621 7 x 5.75 x 4.50 STI-9622 8.75 x 4 x 3.75

    CLOCK/BELL WIRE CAGESSTI-9631 10.5 DiameterSTI-9631-SS 10.5 Diameter Stainless SteelSTI-9631-R 10.5 Diameter RedSTI-9632 16.5 DiameterSTI-9632-SS 16.5 Diameter Stainless SteelSTI-9633 20 Diameter

    EXIT SIGN WIRE CAGESSTI-9640 10.5 x 13.75 x 2.75 STI-9740 15.5 x 20.5 x 6

    BAY LIGHT WIRE CAGESSTI-9702 For Hubbell Superbay Lights

    21.43 x 22.50STI-9709 For Hubbell Superbay Lights 24.5

    x 26

    MISCELLANEOUS WIRE CAGES

    STI-9601

    STI-9625

    STI-9796

    STI-9632

    STI-9640

    STI-9702

    STI-9649

    STI-9705

    STI-9624

    STI-9618

    STI-9651 Fluorescent Light Damage Stopper

    STI-9705 Horn/Strobe/Speaker Damage Stopper FlushSTI-9708 Horn/Strobe/Speaker Damage Stopper SurfaceSTI-9711 Horn/Strobe/Speaker Damage Stopper FlushSTI-9714 Horn/Strobe/Speaker Damage Stopper SurfaceSTI-9716 Camera Damage Stopper

    STI-9717 Speaker/Strobe Damage Stopper FlushSTI-9720 Speaker Strobe Damage Stopper SurfaceSTI-9730 Wire Guard Damager Stopper

    STI-9796 Outdoor Light Damage Stopper

    STI-9880 Fluorescent Lighting Damage Stopper SmallSTI-9881 Fluorescent Lighting Damage Stopper Large

    JUNE2014

    ADDITIONAL WIRE GUARDS AVAILABLEVisit www.sti-usa.com for complete details

    STI Waterford MI 800-888-4784

    STI-9880

    EMERGENCY LIGHT CAGESSTI-9641 10.7 x 14.6 x 4 STI-9644 8.7 x 17.7 x 5 STI-9645 13.8 x 21.7 x 5.9 STI-9649 10.75 x 24.75 x 11.25 STI-9703 5 x 13.5 x 4

    BEACON & SOUNDER CAGESSTI-9614 7.9 x 6STI-9615 3.7 x 3.5STI-9617 5.9 x 4.9STI-9664 3.86 x 6.18STI-9665 7 x 8.43

    STI-9604-SS

    STI-9621

    STI-9615 STI-9664