Embed Size (px)
Citation preview
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
JGSW
Stone Cladding
Installation Methods
All information presented here is only a review of the commonly used stone
installation methods and details. A professional engineering consultation and
certifications is needed for each application of those methods.
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
Stone Cladding
Installation Methods
Mechanical Fixing Methods-The stone is fixed to the backup wall using mechanical anchors.
Wet (Reinforce Concrete)Methods-The stone is fixed to the backup wall using a system of concrete and steel (Reinforce Concrete).
Gluing / Thin Set Methods-The stone is Glued directly to the backup wall (Interior walls only).
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
Mechanical Fixing Methods
The stone is fixed to the backup wall ( Concrete or steel beams) using steel anchors that restrain vertical and horizontal movement of the stone.
At most cases the stone is distant from the backup wall so an air cavity is created between the stone and the backup wall. That air cavity enables better building ventilation and thermal & acoustic insulation.
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
Mechanical Fixing MethodsAnchor Types
Name: Split – Tail Kerf anchor
Stone thickness: 2” and upType of slotting- Continues Kerf, SlotAdjustability : Medium
#1
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
Name: L- Kerf anchor
Stone thickness: 2” and upType of slotting- Continues Kerf, SlotAdjustability : Medium
Mechanical Fixing MethodsAnchor Types
#2
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
Name: Pin Anchor Stone thickness: 1 ¼ ” and upType of slotting- HoleAdjustability : High
Mechanical Fixing MethodsAnchor Types
#3
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
Name: Rod/Pipe Anchor Stone thickness: 1 ¼ ” and upType of slotting- HoleAdjustability : Low
Mechanical Fixing MethodsAnchor Types
#4
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
Name: Mortar setting with securing ties Stone thickness: 1 ½ ” and upType of ties: wall tie, channel slot anchor, wire ,strap.Adjustability : Medium
Mechanical Fixing MethodsAnchor Types
#5
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
Mechanical Fixing MethodsChannels & Rails
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
The stones are laid one on top of the other and fixed to the backup wall using a system of concrete and steel (Reinforce Concrete).
Wet (Reinforce Concrete)
Methods
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
Name: Israeli MethodDescription: the first raw of bottom stones is supported by a concrete or steel ledge. The upper rows are built on the first raw. Each stone is tied to a metal wire mesh that is fixed to the backup all with screws. After securing the stones, a concrete is poured to the gap between the stone rows and the backup wall crating a reinforced concrete.Stone Thickness: 1 ½” and upStone dimensions : 12” height X free length
Wet (Reinforce Concrete)
Methods
#1
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
Name: Mortar setting with metal meshDescription: the first raw of bottom stones is supported by a concrete or steel ledge. The upper rows are mortared to the backup wall and then tied to a wire.Stone Thickness: 1 ¼ ” and up
Wet (Reinforce Concrete)
Methods
#2
www.jerusalemgardens.com [email protected]
JERUSALEM GARDENS
Natural Stone, since 1980
Gluing / Thin Set Method
The stone is Glued directly to the backup wall.This method is commonly used with ceramics and is recommended to Interior walls only.
