StoreLand€¦ · Web view11. Sending and export program After you finish editing and setting, then clickto send program directly or export program by USB data cable. 12. Area manage

屏掌控(LedArt) APP 说明书

HD Tech App-LedArt operation manualI. Overview........................................................................................................................................2

1. control system requirement..................................................................................................22）Mobile phone requirement................................................................................................32. Communication method.....................................................................................................3

II. App Installation and Uninstallation...............................................................................................41. APP-LedArt installation..........................................................................................................42. APP-LedArt uninstallation.....................................................................................................5

III. Program edition...........................................................................................................................51. Software main interface introduction...................................................................................52. Control interface of the device..........................................................................................73. Camera function(only full color controller)...........................................................................84. Shake (only full color controller)...........................................................................................95. Editing and sending program..........................................................................................106. Video program edit.(only full color controller)...................................................................117. Image program edit.............................................................................................................128. Text edit...............................................................................................................................149. Clock edit.............................................................................................................................1510. Border edit........................................................................................................................1711. Sending and export program.............................................................................................1912. Area manage.....................................................................................................................2013. Area content (only full color controller)............................................................................2014. Add more programs..........................................................................................................2115. Screen parameter setting(only single/dual color controller)............................................22

深圳市灰度科技有限公司版权所有 1


I. OverviewCurrently LED display control system are based on computer version

software to control, each project scene requires an extra computer to debug LED display,very inconvenient. The smart phone has become people’s portable basic electronic products.The application based on mobile phone to control LED screen has become the industry's urgent needs.

Realized the market demand,our Huidu Technology, as the leader of LED display asynchronous control system, after one-year painstaking researching and development, we finally released cool,easy and practical mobile App---LedArt, it is shocked breakthrough fruit, unique and first in the Industry.

After users install this APP to your phone or tablet, then you can easy control full-color and single/dual color LED display which matched Huidu’s controller card.

1. control system requirement

1）Huidu all series controller cards

Full color :

Online&offline dual mode player box series① HD-A603 HD-A602 HD-A601

Offline cascading sending card series② HD-A30/A30+ HD-C30 HD-C10

Lintel full color display controller series③HD-D30 HD-D20 HD-D10

Single/dual color :



2）Mobile phone requirement

All smart phones equipped more than Android 4.0 version system

2. Communication method

Solution 1 onboard WiFi module:

Solution 2 WiFi wireless router:



Solution 3 treat mobile phone as an U-disk



II. App Installation and Uninstallation

1. APP-LedArt installation

Download the APP file to your phone from our website(www.huidu.cn/en)

The link: http://www.huidu.cn/en/download/ruanjianxiazai.html

The user can scan the QR code via smart phone to download the installation file, or you can save it on your PC then copy it into your phone via USB cable or QQ. After download, click the installation file to default install it.

2. APP-LedArt uninstallation

On phone desktop interface, long press icon of LedArt until there exist delete option, and place it to delete, then finish.


http://www.huidu.cn/download/ruanjianxiazai.html


III. Program edition

1. Software main interface introduction

The main interface contains WiFi search area, my programs, select tools scan, find, device list etc.

1） WiFi search area, it can automatically search surrounding controller

devices' wifi signal,when WiFi signal is better,the WiFi icon will be brighter. As picture above shows, A30-15-A6033 This is the strongest WiFi signal nearby, the second strong wifi signal is A30-15-A5586,the last is A603-0000-A0001



2） In wifi search area, click to select one wifi signal id, it can connect to

the wifi right now.

3） Click “find”,you can see all WiFi signal being searched by phone,

including WiFi router. If the control card is connected to the WiFi router via network cable, you can directly connect to the router to get the controller ID.

4） Click “scan”，you can scan ID bar code on full color display controller

or scan QR code on single/dual color controller,the phone can automatically connect to specified controller wifi, then you can control and edit the LED screen.

5） “select tools”is designed to help user select properly and practical

controller model based on user's LED display type and size.Without consulting to technical engineer, user also can easy reassuringly purchase controller.

6） “My program”.It saved program history you edited before.you can

clearly check the programs you created, and do amending for the program which you want to modify, or also can select a program, and do clustering sent.

7） click on the top right corner of interface to find language option,it

support, English, Turkish, Persian, Russian, Korean, polish, Spanish, Japanese, German, Chinese etc. 11 languages.

8） click ,then click “clear cache”, can clear cache files in your phone.



9） In device list,user can visually check the device type,device on/off-line

status and screen size; click , you can filter only list online device;

click on a device, user can enter the control interface of the device.

10） If there's no device or device type and screen size of is not the same

as your real screen. You can click to add new device, then enter into

the device to edit and export program,and send the program data to display.

2. Control interface of the device

In control interface of the device,it contains basic setting options:

"Time","Brightness","switch","camera","shake" and "edit program" etc.

1） Time correction, can directly Synchronize the same time as your

phone, also can close Automatic to set time by manual. As below picture shows:

2） Brightness, slide left or right to switch default setting,custom

setting,automatic setting, three setting ways to adjust brightness . automatic setting way need add external brightness sensor on the controller. As below picture shows:

3） Switch, set switch on/off of display. Open “Enable” to use Switch.There


屏掌控(LedArt) APP 说明书exist 4 time period setting,Switch off is just to cut off data signal to make screen black, not cut off power supply.

4） Camera ,real time record and play video scene onto large LED screen.

5） Shake,select a photo, shark off smart phone,the picture can be showed

in the LED display right now.

6） Edit program, can add Text,Clock,Image,Video etc. Click on the right

down corner and enter the program list of this device ，and can create

many programs and can save them at the same time, and you can send them whenever you want to send,no need edit temporary.

3. Camera function(only full color controller)

In control interface of the device,click to enter real-time video camera, click

to start recording (there is a "red dot" flashing in the upper left corner of

phone interface).The real-time video image will be displayed on the LED

screen→click to stop recording,then the LED screen will automatically

switch to play the program which stored in the device before.



Camera video image quality has 3 mode: Fluency, SD,HD.(Fluency:320P; SD:480P; HD:720P).User can choose the mode depended on phone and wifi signal.The default is fluency.

4. Shake (only full color controller)

In control interface of the device,click into Shark it off,take a new

picture or select a existed picture→shake your phone,when you feel vibration,it means the picture has been sent to the LED screen. (Or glide up with your finger on the picture, you can see a "rocket" launching,that means it is sending).



The pictures program which was sent via Shake is the last program in the program list, so when you shake phone to send out picture, the picture will be display on LED screen right now, and after it, the controller will start playing content from first program to last.

Click on the right upper corner,it can set picture hold time.

5. Editing and sending program.

In control interface of the device,click"Edit program",enter program edited

interface, click to add Text,Clock,Image,Video etc. After you finish editing

and setting, then click to send program directly or export program by USB


屏掌控(LedArt) APP 说明书data cable.

6. Video program edit.(only full color controller)

1）In the program edited interface,click ,then click to add video.



2）click or ，you can enter video property options to keep aspect

ratio or modify the video file.

7. Image program edit

1）In the program edited interface,click ,then click to add image.



2）For full color controllers, click or ，you can enter image property

options to set display effect or modify image.

3 ） For single/dual color controller,click ， enter image property to set

display effects ,effect speed, add border and background etc.



8. Text edit

1）In the program edited interface,click ,then click to add Text.

2）For full color controllers，click or ，you can enter Text property

options to change content, display effect and etc.



3）For single/dual color controller ， click ， enter TEXT property to set

display effects ,effect speed, add border and background etc.



9. Clock edit.

1）In the program edited interface,click ,then click to add Clock.

2）For full color controller,click or ，enter Clock property options to

change clock style, time zone,front size and etc.



3）For single/dual color controller,click ,enter Clock property options to

change display effect,effect speed,add border,and background etc. time zone,front size and etc.



10. Border edit

1）Area border，After you add video or image or text or clock,then click

to enter border options to add the border effect,type,and etc.



2）Program border,click ，choose “program properties”,click to add

program border.

11. Sending and export program

After you finish editing and setting, then click to send program directly or

export program by USB data cable.



12. Area manage

Multi-zone exist at the same time, regional post-added will be at the top level and locate in the top area in the list.



13. Area content (only full color controller)

Area content plays from the top down in sequence. As shown, the text → Images → clock, turn loop. The content post-added in the bottom of the list.

14. Add more programs

In the program edited interface，click on the right upper corner，enter

into program management，then click to add new program.



1） Long press a program, drag it to another program’s position to occupy

its position,and other programs will move towards later in turns.

2） Long press one program, the "Delete" icon will appear on the right side,

and drag program to the "Delete" to delete the program.

3） "blue dot" means that this program only add text. "Orange dot"

means only add image, "yellow dot" means only add clock ."green

dot" means only add video. If icon like this ,it means that the

program contains text, pictures, video, and clock, "√" means the program is currently being edited.

15. Screen parameter setting(only single/dual color controller)

In the single-color control interface, click , can set the screen width

and height, color and gray-scale mode; click the "Hardware Settings", can select the common module configure file; click on the upper right corner,

can set data polarity, OE polarity, latch polarity,Use 138 decoder and etc.




Documents

StoreLand€¦ · Web view11. Sending and export program After you finish editing and setting, then clickto send program directly or export program by USB data cable. 12. Area manage