Upload
others
View
3
Download
1
Embed Size (px)
Citation preview
Structured Cabling Systems
S T R U C T U R E D C A B L I N G S Y S T E M S
C O P P E R S Y S T E M S Page
Augmented Category 6 Systems Page
Category 7 Systems Page
Category 6 Systems Page
Category 5e Systems Page
Category 3 Systems Page
Copper System Accessories Page
S M A R T PAT C H I N T E L L I G E N T I N F R A S T R U C T U R E M A N A G E M E N T Page
Scanning Hardware Page
Copper Patch Panels Page
Copper Patch Cords Page
Fibre Patch Panels Page
Fibre Patch Cords Page
Components Page
Software Components Page
O P T I C A L S Y S T E M S Page
Tight Buffered Cables Page
Distribution Cable ...................................................................................................................................................Page
Breakout and Patch Cable ........................................................................................................................Page
Loose Tube Cables Page
Unitube Cable ................................................................................................................................................................Page
Multi Loose Tube Cable .................................................................................................................................Page
Special Environment Cables Page
Fire Survival Cable ..................................................................................................................................................Page
Optical Components Page
Pigtails and Patch Cords ..............................................................................................................................Page
Optical Patch Panels ...........................................................................................................................................Page
Connectors and Adaptors ........................................................................................................................Page
Air Blown Fibre Page
D ATA C E N T R E C A B I N E T S & R A C K S Page
High Density Fibre Cabinet Page
High Density Copper Cabinet Page
High Density Distribution Equipment Rack Page
High Density Cable Management Rack Page
Pre-terminated Fibre Solutions Page
5
7
22
25
42
58
62
74
83
84
85
87
88
93
114
115
116
117
123
126
134
147
156
157
159
161
163
164
166
167
168
169
170
171
172
2
Our Business
Brand-Rex is a leading global supplier of
structured cabling systems for data networks,
and is a niche supplier of high performance
cables for extreme environment applications.
Brand-Rex provides complete cabling systems
that connect the IT equipment in our offices and
datacentres – from patch cords and wall outlets
seen in the office, to cable running under floors
and above ceilings, to connectivity panels that
interface with active equipment in the IT room.
Within vast datacentres, hosting huge amounts
of business-critical information, Brand-Rex offers
industry-leading, high-speed and high-density
solutions.
Our Company
Brand-Rex Limited was established in 1972,
in Glenrothes, Scotland, where the company’s
head office remains today. Brand-Rex also has
10 global offices, a presence in over 50 countries
worldwide and over 300 employees supporting
a truly global customer base.
The core technologies provided by Brand-Rex
include copper-based cabling systems, fibre
optic cabling systems (including a unique
air-blown fibre system) and an Intelligent
Infrastructure & Management Solution that
delivers full visibility and management
capability to end user clients.
Brand-Rex solutions are delivered to market
through a network of high-calibre service
and installation partners. The company uses
distribution specialists and an army of trained,
accredited installers who ensure that the correct
system solutions are deployed and installed
every time. The company also engages with end
users and their consultants directly to ensure
the best mutual understanding of needs and
capabilities is achieved.
Technology Leader
With an experienced, dedicated and expert
design and development team, Brand-Rex is
a strong and capable force that continues to
challenge industry conventions.
Through sophisticated modelling techniques
and advanced test laboratories, Brand-Rex
has been able to develop some of the most
sophisticated cable and connectivity
solutions available.
The New Product Development process that
Brand-Rex deploys is a rigorous one. Among
other issues this process entails technology
forecasting, customer clinics, competitor
analysis, cross-functional teams and, of course,
continued investment.
Brand-Rex’s technical expertise is further
evidenced through representation on standards
committees, products that stand up to
3rd party scrutiny, a significant patents portfolio,
industry-recognised training courses and
professional engagement with the industry’s
leading consultants.
Technical Service and Support
Brand-Rex has a dedicated and experienced
technical support team that is led from head
office and located throughout the world to
support our global customers.
3
This team’s purpose is to deliver training and
technical support to installation partners
and end users in the design, deployment and
commissioning of their high-performance
data networks.
The rigid training and accreditation of installers,
combined with validation of installation test
results, allows Brand-Rex to offer end users
a 25-year product and lifetime application
warranty that remains one of the best
in the industry.
Best in Class Manufacturing
Brand-Rex has long been known for its high
quality manufacturing capabilities.
Having declared a commitment to maintaining
cable production within the UK, Brand-Rex
has invested £10 million in the creation of a
new data cabling factory at the Glenrothes
site enabling the company to compete on the
global stage against manufacturers in lower cost
countries. The investment program has resulted
in a factory that can rival any in the world.
This manufacturing facility and the ‘Speciality
Cable’ plant at Leigh, near Manchester, both
hold ISO 9001:2008 quality certification and
environment accreditation to ISO:14001:2004.
Customer Service - Brand-Rex has a mission:
‘To be a market leader in Customer Service.’
“So, whether it’s the ease of gaining information,
the way that we talk to our customers, our
ability to provide the right products when
required, or how flexible we are to your own
special needs, Brand-Rex is determined
to surpass your expectations. As members of
The Institute of Customer Service, we know
the benchmark that we must surpass. We are
implementing some rigorous assessment and
training within every area of our business to
ensure that no matter what we do, we beat
your expectations.
We think you will notice the difference.”
C O M PA N Y P R O F I L E
Brand-Rex - A Carbon Neutral Company
Brand-Rex is dedicated to reducing its impact
on the environment and as demonstrated our
commitment by reaching Carbon Neutral status
for our organisational and operational activities.
Working with the market-leading adviser on
energy and emissions reduction: CAMCO Centre
for Carbon Management, we measured our
organisational carbon footprint in line with ISO
14064, which includes the compulsory scope 1
and 2 emissions and voluntary scope 3 emissions.
As one of the leading cable suppliers in the world
we understand the production of cable inevitably
means high levels of electricity use, that’s why we
are committed to continually reducing our impact
on the environment by utilising sustainable
energy sources and materials.
5
Structured cabling systems of today and in the future structured
cabling world have to cope with the ever-growing demands of
greater and greater bandwidth absorption within the local area
network. All Brand-Rex copper systems provide the IT Manager
with a complete open cabling system from the point of entry,
to building distribution, to floor distribution, to wiring closet,
to wall outlets, and ultimately to the desk.
The Brand-Rex product range is system based, with each system
containing full connectivity comprising of cable, patch panels,
wall outlets and patch cords supporting all LAN applications
including VoIP and Power over Ethernet
A premier grade cabling system needs standards compliant
components, and that is what Brand-Rex systems offer.
The proof of this is in the overall link and channel performance,
which is the only parameter that the transmission equipment
is going to see. GigaPlus, Cat6Plus and 10GPlus components
are engineered to achieve guaranteed channel performance.
Brand-Rex Copper Systems Support all the Protocols defined
in the international standards including:
(IEEE 802.3an)
Third party independent certificates of compliance are available
for component and channel performance from 3P Testing and
GHMT Laboratories GmbH for GigaPlus, Cat6Plus, 10GPlus
and U-MediaPlus.
Augmented Category 6.
50173-1 and Class FA.
C O P P E R S Y S T E M S
6
CatAC6
Cat5e
Cat6
Cat7
P R O D U C T D E S C R I P T O R S E X P L A I N E D
Cable Properties
A simple legend system has been adopted throughout this brochure. The detail listed here provides descriptions of the symbols used.
These symbols describe the physical properties of the cable, and where cables are to be used.
Horizontal CableSuitable for installation in the
horizontal plane of a structured
wiring system.
This product is available with an
IEC 60332-3-24 flammability rating.
This product is available with an
IEC 60332-1 flammability rating.
Riser CableSuitable for installation in the
risers and backbone areas within
a structured wiring system.
UnshieldedThe cable is unshielded.
Foiled Pairs A PET coated Aluminium foil is
applied around the individual pairs.
Overall FoilA PET coated Aluminium foil
is applied around the 4 pair
core construction.
Overall TCW BraidThe core construction
is surrounded by an overall
TCW braid.
Category 6
Communications RoomSuitable for use in a communications
room or consolidation point.
Voice over IPSuitable for VoIP applications on
enabled networks.
Power over EthernetSuitable for Power over Ethernet
applications on enabled networks.
Internal System
General Office OutletSuitable for general offfice use.
77
Waking up to a new era
10 Gigabit Ethernet over copper cabling
systems have been heralded as the greatest
technological revolution in networking
since the birth of Ethernet.
The engineering science dedicated to
overcoming the boundaries of convention
should not be underestimated. Brand-Rex
has dedicated a team of design engineers,
technologists and laboratory technicians
to developing the highest performance
10 Gigabit Ethernet solution on the
market today.
High performance businesses need
high performance networks
The use of increasingly sophisticated
IT applications in modern, competitive
business has driven the growth of Ethernet.
What value is an enterprise application if
the network hardware cannot support it?
Whether your business uses demanding
graphics based design packages, data
hungry finance systems or emerging
multi-media communication tools, they
have one thing in common, a need for:
Greater bandwidth
Maximum transmission reliability
Life long quality of operation
Resilience against environmental
challenges
10 Gigabit Ethernet provides the next
standard platform that will allow the
continued growth of high performance
business applications. Powerful IT
networks, able to deliver the new
10GBASE-T protocol, require phenomenal
processing power within active network
switching and routing hardware.
Such active hardware commands
a very high price.
Yet this investment is pointless unless
supported by an equally sophisticated
cabling system. It is vital that you can
trust the claims of any 10 Gigabit Ethernet
cabling system since the choices made
today will impact the business applications
of tomorrow.
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
8
PRODUCT DESCRIPTION
The Brand-Rex 10GPlus product set is a premium quality, high performance, future proof, cabling system. 10GPlus is classified
as an Augmented Category 6 and Class EA product set which is fully backward compatible to Category 6 (Class E) and Category 5e
(Class D) solutions.
It is a product set which is designed to be compliant with the new IEC Class EA and Augmented Category 6 standards, ready
for the new application from IEEE, 10GBASE-T. The cabling system is available in screened and unscreened solutions, however
screened products are recommended because they are more robust against against electromagnetic noise and have improved
alien crosstalk performance.
Channel Performance
Frequency (MHz)
Insertion Loss (dB / 100m)
NEXT (dB)
PSNEXT (dB)
ELFEXT (dB / 100m)
PSELFEXT (dB / 100m)
Return Loss (dB / 100m)
ACR-N (dB / 100m)
PSACR-N (dB / 100m)
Channel Performance of 10GPlus
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
1 4 10 16 100 250 300 400
Spec
Typical
Spec
Typical
Spec
Typical
Spec
Typical
Spec
Typical
Spec
Typical
Typical
Typical
4.0
2.1
65.0
78.8
62.0
77.7
63.3
72.0
60.3
70.0
19.0
23.0
76.6
75.6
4.1
4.0
63.0
69.3
60.5
67.9
51.2
60.0
48.2
58.0
19.0
23.0
65.3
63.9
6.4
6.3
56.6
62.9
54.0
61.3
43.3
52.0
40.3
50.0
19.0
23.0
56.7
55.0
8.1
7.9
53.2
59.7
50.6
57.9
39.2
47.9
36.2
45.9
18.0
22.0
51.7
49.9
20.8
20.4
39.9
46.6
37.1
42.2
23.3
32.0
20.3
30.0
12.0
16.0
26.3
23.9
33.8
33.1
33.1
40.0
30.2
37.2
15.3
24.0
12.3
22.0
8.0
12.0
6.8
4.1
37.3
36.6
31.7
38.6
28.8
35.8
13.7
22.5
10.7
20.5
8.0
12.0
2.1
-0.8
43.6
42.8
29.6
36.5
26.6
33.6
11.2
20.0
8.2
18.0
8.0
12.0
-6.3
-9.2
500
49.3
48.4
27.9
34.9
24.8
31.8
9.3
18.0
6.3
16.0
8.0
12.0
-13.5
-16.5
Guaranteed
Headroom to Class E
6%
6
7.5
8
9
3
9
10
2%
6
7
9
10
4
6
7
Typical Headroom
to Class EA
Unshielded Systems
Frequency (MHz) 4 10 16 100 250 300 400
PSANEXT (dB )Spec
Typical
PSAACR-F (dB)Spec
Typical
67.0
83.0
67.0
82.0
67.0
77.0
65.0
70.0
67.0
73.0
57.0
62.0
67.0
71.0
52.9
57.9
60.0
63.0
37.0
42.0
54.0
57.0
29.0
34.0
52.8
55.8
27.5
32.5
51.0
54.0
25.0
30.0
500
49.5
52.5
23.0
28.0
-
-
3
5
Guaranteed
Headroom
to Class E
Typical Headroom
to Class EA
Frequency (MHz) 1 4 10 16 100 250 300 400
PSANEXT (dB )Spec
Typical
PSAACR-F (dB)Spec
Typical
67.0
90.0
67.0
87.0
67.0
84.0
65.0
75.0
67.0
80.0
57.0
67.0
67.0
78.0
52.9
62.9
60.0
70.0
37.0
47.0
54.0
64.0
29.0
39.0
52.8
62.8
27.5
37.5
51.0
61.0
25.0
35.0
500
49.5
59.5
23.0
33.0
-
-
10
10
Shielded Systems
Guaranteed
Headroom
to Class E
Typical Headroom
to Class EA
Central Computer Room Floor Distribution
Building
Riser
Outlet
2,3 or 4 Connector Channel
9
AC6500MHz
Brand-Rex Copper Cables - 10GPlusΩ
Cable Standards
The cable is compliant with:
standard EN 50288-11-1
The cable is fully backwards compatible with Category 5
and Category 6 systems
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
Category 6 cable to support 10 Gigabit
Ethernet protocol for installation in horizontal
and backbone applications.
PRODUCT PERFORMANCE
Core
Conductor: 23 AWG Plain Annealed
Copper Wire
Insulation: Polyolefin
Diameter: 1.06mm Nominal
Pair: 2 of the above cores
Pair Colour: Blue - White, Orange - White
Green - White, Brown - White
Final Assembly
Cable: 4 of the above pairs cabled
together around a cross filler
Sheath: LSHF compound
Mechanical and Environmental
Temp - Installation: 0C to 50C
Temp - Operation: -20C to 75C
Max Tensile Load: 10kg per cable
Min Bend Radius: 8 x Effective Diameter
(installation)
Min Bend - Operation: 4 x Effective
Diameter (operation)
Halogen Free cable types (LSHF) meet IEC 60754-2
and IEC 61034
Max 19Ω
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500 MΩ.km @ 100-500 V test voltage
Ω @ 100Mhz
Min 40dB
Max 19Ω
0.5%
100% in process test
>5 GΩ.km
Ω @100Mhz
56dB
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Coupling Attenuation up to 1Ghz
Electrical Characteristics @ 20°c Specification Typical Performance
Return Loss
Insertion Loss
NEXT
PSNEXT
ELFEXT
PSELFEXT
PSANEXT
PSAELFEXT
Characteristic Typical Headroom vs (250MHz) Typical Headroom vs AC6 (500MHz)
5dB
6%
10dB
10dB
12dB
12dB
NA
NA
5dB
2%
10dB
20dB
12dB
12dB
5dB
6dB
Sheath
Cross Filler
23 AWG PACW
Polyolefin Insulation
* Power Sum Attenuation to Alien Crosstalk (near end) Ratio The Alien crosstalk performance of cables is assessed using a ‘6 round 1’ or ‘4 on a drum’ method.
PSACR-N @ 500MHz
PSAACR-N* @ 500MHz
Typical headroom on key S/N characteristics - for information only
NA
NA
0dB
13dB
Typical Headroom vs Cat6 (250MHz) Typical Headroom vs AC6 (500MHz)
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
AC6U-HF1-500VT
AC6U-HF1-1000VT
AC6U-HF3-500BU
AC6U-HF3-1000BU
500
1000
500
1000
LSHF
LSHF
Violet
Blue
8.5
8.5
79
81
0.32
0.42
IEC 60332-1-2
IEC 60332-3-24
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
Product Part Numbering
1010
AC6500MHz
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
to support 10 Gigabit Ethernet protocol for
installation in horizontal and backbone areas.
PRODUCT PERFORMANCE
Core
Conductor: 23 AWG Plain Annealed
Copper Wire
Insulation: Cellular Polyolefin
Diameter: 1.36mm Nominal
Pair: 2 of the above cores
Tape Screen: Individual pair wrapped with
aluminium polyester tape,
applied metal side out
Pair Colour: Blue-White, Orange-White,
Green-White, Brown-White
Final Assembly
Cable: 4 of the above shielded pairs
Drainwire: 0.5mm Tinned Annealed
Copper Wire
Tape Screen: Wrapped with aluminium
polyester tape,
applied metal side in
Sheath: LSHF compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
Halogen Free cable types (LSHF) meet IEC 60754-2
and IEC 61034
Sheath
Polyolefin Insulation
23 AWG PACW
TACW Drainwire
Cable Standards
The cable is compliant with:
It is also designed to be compliant with EN50288-10-1
standards when it is published:
These cables are also fully backwards compatable with
Category 5 and Category 6 systems
* Power Sum Attenuation to Alien Crosstalk (near end) Ratio The Alien crosstalk performance of cables is assessed using a ‘6 round 1’ or ‘4 on a drum’ method.
Brand-Rex Copper Cables - 10GPlus
Return Loss
Insertion Loss
NEXT
PSNEXT
ELFEXT
PSELFEXT
PSANEXT
PSAELFEXT
Characteristic Typical Headroom vs Cat6 (250MHz) Typical Headroom vs AC6 (500MHz)
5dB
6%
20dB
20dB
15dB
15dB
NA
NA
5dB
2%
20dB
20dB
15dB
15dB
10dB
10dB
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MΩ @ 100-500 V test voltage
Min 55 dB
0.5%
100% in process test
>5 GΩ.km
75 dB
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Transfer Impendance
Coupling Attenuation up to 1Ghz
Electrical Characteristics @ 20°c Specification Typical Performance
PSACR-N @ 500MHz
PSAACR-N* @ 500MHz
Typical headroom on key S/N characteristics - for information only
NA
NA
35dB
20dB
Typical Headroom vs Cat6 (250MHz) Typical Headroom vs AC6 (500MHz)
Product Part Numbering
500
1000
500
1000
500
1000
LSHF
LSHF
LSHF
Violet
Violet
Blue
0.13
0.26
0.15
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-3-24
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
7.20
14.5 x 7.2
7.6
51
102
60
11
AC6500MHz
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
to support 10 Gigabit Ethernet protocol for
installation in horizontal and backbone areas.
PRODUCT PERFORMANCE
Core
Conductor: 23 AWG Plain Annealed
Copper Wire
Insulation: Cellular Polyolefin
Diameter: 1.36mm Nominal
Pair: 2 of the above cores
Tape Screen: Individual pair wrapped with
aluminium polyester tape,
applied metal side out
Pair Colour: Blue-White, Orange-White,
Green-White, Brown-White
Final Assembly
Cable: 4 of the above shielded pairs
Braid Tinned Annealed Copper Wire
Sheath: LSHF compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
Halogen Free cable types (LSHF) meet IEC 60754-2
and IEC 61034
Sheath
TACW Braid
Polyolefin Insulation
23 AWG PACWCable Standards
The cable is compliant with:
It is also designed to be compliant with EN50288-10-1
standards when it is published:
These cables are also fully backwards compatable with
Category 5 and Category 6 systems
* Power Sum Attenuation to Alien Crosstalk (near end) Ratio The Alien crosstalk performance of cables is assessed using a ‘6 round 1’ or ‘4 on a drum’ method.
Brand-Rex Copper Cables - 10GPlus
Return Loss
Insertion Loss
NEXT
PSNEXT
ELFEXT
PSELFEXT
PSANEXT
PSAELFEXT
Characteristic Typical Headroom vs Cat6 (250MHz) Typical Headroom vs AC6 (500MHz)
5dB
6%
20dB
20dB
15dB
15dB
NA
NA
5dB
2%
20dB
20dB
15dB
15dB
10dB
10dB
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MΩ @ 100-500 V test voltage
Min 55 dB
0.5%
100% in process test
>5 GΩ.km
75 dB
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Transfer Impendance
Coupling Attenuation up to 1Ghz
Electrical Characteristics @ 20°c Specification Typical Performance
PSACR-N @ 500MHz
PSAACR-N* @ 500MHz
Typical headroom on key S/N characteristics - for information only
NA
NA
35dB
20dB
Typical Headroom vs Cat6 (250MHz) Typical Headroom vs AC6 (500MHz)
Product Part Numbering
500
1000
500
1000
500
1000
LSHF
LSHF
LSHF
Violet
Violet
Blue
0.11
0.24
0.12
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-3-24
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
7.20
14.5 x 7.2
7.6
51
102
60
12
AC6500MHz
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
cable to support 10 Gigabit Ethernet protocol for
installation in horizontal and backbone areas.
PRODUCT PERFORMANCE
Core
Conductor: 23 AWG Plain Annealed
Copper Wire
Insulation: Cellular Polyolefin
Diameter: 1.36mm Nominal
Pair: 2 of the above cores
Tape Screen: Individual pair wrapped with
aluminium polyester tape,
applied metal side out
Pair Colour: Blue-White, Orange-White,
Green-White, Brown-White
Final Assembly
Cable: 4 of the above shielded pairs
Drainwire: 0.5mm Tinned Annealed
Copper Wire
Sheath: LSHF compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
Halogen Free cable types (LSHF) meet IEC 60754-2
and IEC 61034
Cable Standards
The cable is compliant with:
It is also designed to be compliant with EN50288-10-1
standards when it is published:
These cables are also fully backwards compatable with
Category 5 and Category 6 systems
* Power Sum Attenuation to Alien Crosstalk (near end) Ratio The Alien crosstalk performance of cables is assessed using a ‘6 round 1’ or ‘4 on a drum’ method.
Brand-Rex Copper Cables - 10GPlus
Return Loss
Insertion Loss
NEXT
PSNEXT
ELFEXT
PSELFEXT
PSANEXT
PSAELFEXT
Characteristic Typical Headroom vs Cat6 (250MHz) Typical Headroom vs AC6 (500MHz)
5dB
6%
20dB
20dB
15dB
15dB
NA
NA
5dB
2%
20dB
20dB
15dB
15dB
10dB
10dB
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MΩ @ 100-500 V test voltage
Min 55 dB
0.5%
100% in process test
>5 GΩ.km
75 dB
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Transfer Impendance
Coupling Attenuation up to 1Ghz
Electrical Characteristics @ 20°c Specification Typical Performance
PSACR-N @ 500MHz
PSAACR-N* @ 500MHz
Typical headroom on key S/N characteristics - for information only
NA
NA
35dB
20dB
Typical Headroom vs Cat6 (250MHz) Typical Headroom vs AC6 (500MHz)
Product Part Numbering
500
1000
500
1000
LSHF
LSHF
Violet
Violet
0.12
0.25
IEC 60332-1-2
IEC 60332-1-2
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
7.1
14.3 x 7.1
51
102
Sheath
Polyolefin Insulation
23 AWG PACW
TACW Drainwire
13
AC6500MHz
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
Sheath
Polyolefin Insulation
26 AWG PACW
TACW Drainwire
Brand-Rex Copper Cables - 10GPlus Zone Cable
Cable Standards
The cable is compliant with:
ANSI/TIA/EIA568C
It is also designed to be compliant with EN50288-10-2
when it is published.
* Power Sum Attenuation to Alien Crosstalk (near end) Ratio The Alien crosstalk performance of cables is assessed using a ‘6 round 1’ or ‘4 on a drum’ method.
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Electrical Characteristics @ 20°c Specification Typical Performance
Return Loss
Insertion Loss
NEXT
PSNEXT
ELFEXT
PSELFEXT
PSA ACR-N
PSAACR-F
Characteristic Typical Headroom vs Cat6 (250MHz) Typical Headroom vs AC6 (500MHz)
PSACR @ 500MHz
PSAACR-N* @ 500MHz
Typical headroom on key S/N characteristics - for information only
Typical Headroom vs Cat6 (250MHz) Typical Headroom vs AC6 (500MHz)
Max. 2%
1.0kV dc or 0.7kV ac for 1 min
Max.
Max.
100 Ω ± 5 Ω @ 100MHz
26
0,5%
100% in process test
5dB
20%
20dB
20dB
15dB
15dB
NA
NA
5dB
20%
20dB
20dB
15dB
15dB
20dB
20dB
NA
NA
35dB
20dB
Product Part Numbering
AC6-DCZ-500VT
AC6-DCZ-1000VT
AC6-DCZ-500GY
AC6-DCZ-1000GY
500
1000
500
1000
LSHF
LSHF
Violet
Grey
5.6
5.4
33
33
0.08
0.08
IEC 60332-1-2
IEC 60332-1-2
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
cable to support 10 Gigabit Ethernet protocol
for use within the data centre environment.
PRODUCT PERFORMANCE
Core
Conductor: 26 AWG Plain Annealed
Copper Wire
Insulation: Cellular Polyolefin
Diameter: 1.0mm Nominal
Pair: 2 of the above cores
Tape Screen: Individual pair wrapped with
aluminium polyester tape
applied metal side out
Pair Colour: Blue-White, Orange-White
Green-White, Brown-White
Final Assembly
Cable: 4 of the above
shielded pairs
Drainwire: 0.5mm Tinned Annealed
Copper Wire
Sheath: LSHF compound
Mechanical and Environmental
Temp-Installation: 0°c to +50°c
Temp-Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x Outer Diameter
(installation )
4 x Outer Diameter
(operation)
Halogen Free cable types (LSHF) meet IEC 60754-2
and IEC 61034
14
AC6500MHz
MMCPCCHB001
MMCPCCHB002
MMCPCCHB003
MMCPCCHB004
MMCPCCHB005
MMCPCCHB006
Part Number
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
PRODUCT DESCRIPTION
The Brand-Rex Augmented Category 6 patch
cord is part of the Brand-Rex 10GPlus cabling
system. The 10GPlus cabling system is comprised
of high performance cables and connectivity
which not only provide a reliable platform for all of
today’s network applications, but is also designed
to future-proof networks for the emerging, new
higher speed protocols of tomorrow, such as
10GBASE-T. The 10GPlus system is classified as an
Augmented Category 6 and Class EA product set
that is fully backward compatible to Category 6
(Class E) and Category 5e (Class D) products.
Packaging
of 10 for standard stranded cords
Brand-Rex Copper Patch Cords - 10GPlusAugmented Category 6 Blade Server Patch Cords
G 26 AWG SFTP X Crossover
B Blade cord
HBS Solid
010 1 metre
020 2 metre
030 3 metre
050 5 metre
1 Red
4 Blue
5 Green
6 Yellow
8 Grey
A - Cord Type bbb - Cord Length cde - Colour Scheme
(c) Cable
-
-
-
-
8 Grey
(d) Boot 1
-
-
-
-
8 Grey
(e) Boot 2
F - Speciality Tag
Part Number Format
AC6-PC-A-bbb-cde-F
Additional colours on request
Product Part Numbering
RedLength Blue Green Yellow
AC6PCG010-188HB
AC6PCG020-188HB
AC6PCG030-188HB
AC6PCG050-188HB
AC6PCG010-488HB
AC6PCG020-488HB
AC6PCG030-488HB
AC6PCG050-488HB
AC6PCG010-588HB
AC6PCG020-588HB
AC6PCG030-588HB
AC6PCG050-588HB
AC6PCG010-688HB
AC6PCG020-688HB
AC6PCG030-688HB
AC6PCG050-688HB
AC6PCG010-888HB
AC6PCG020-888HB
AC6PCG030-888HB
AC6PCG050-888HB
Grey
26 AWG SFTP 1.0m
26 AWG SFTP - 2.0m
26 AWG SFTP - 3.0m
26 AWG SFTP - 5.0m
Non standard colour and length options are available to order on request.
Additional lengths on request
Note:- Boots are only available in Slate Grey. If boot colouring is required, a Retrofit
coloured boot clip can be purchased separately.
(Brand-Rex ref:-MMCPCCHBz Where z = 1= Red, 4 = Blue 5 = Green 6 =Yellow)
Shielded Patch Cord Clip – Red
Shielded Patch Cord Clip – Black
Shielded Patch Cord Clip – White
Shielded Patch Cord Clip – Blue
Shielded Patch Cord Clip – Green
Shielded Patch Cord Clip – Yellow
100
100
100
100
100
100
Description Qty
15
AC6500MHzAC6500MHz
44.45
PRODUCT DESCRIPTION
The Brand-Rex Augmented Category 6
Snap-In-Jack panel is part of the Brand-Rex
10GPlus cabling system. The 10GPlus cabling
system is comprised of high performance cables
and connectivity which not only provide a reliable
platform for all of today’s network applications,
but are also designed to future proof networks
for the emerging, new, higher speed protocols
of tomorrow, such as 10GBASE-T. The 10GPlus
system is classified as an Augmented Category 6
and Class EA product set that is fully backwards
compatible to Category 6 (Class E) and Category
5e (Class D) products.
Packaging
individually packaged in a cardboard box
Installation
shielded & unshielded jacks
Mechanical Specifications
Dimensions
Material Data
high quality 1.5mm powder coated steel
Brand-Rex Copper Connectivity - 10GPlusAugmented Category 6 Modular Panel
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
Part NumberColour
Product Part Numbering
24 Port Modular Snap-in-jack Panel
24 Port Modular Snap-in-jack Panel
MMCPNLX24SIJ2M-B
MMCPNLX24SIJ8M-B
Black
Grey
16
6250MHz
5e100MHz
AC6500MHz
482.60
44.40
110
Brand-Rex Copper Connectivity - 10GPlusAugmented Category 6 1U 24 Port Patch Panel
24 ports in 1U
True Augmented Category 6/Class EA
performance
Suitable for 10Gigabit Applications
Ideal for use in the datacentre
Removable plug and play modular cassettes
ideal for both on and off site termination
assembly
Integral cable management to provide
strain relief
Compatible with standard 19” racks and cabinets
Flexible solution - panel can be deployed in
either a conventional installation or the module
used as a consolidation point
Supplied with panel mounting accessory kit
PRODUCT DESCRIPTION
The 10GPlus 19” rack mounted 1U 24 port patch
Class EA performance and is ideal for datacentre
applications. The robust patch panel features
4 easy to remove shielded modular units each
comprising of 6 ports.
To assure optimum link performance the panel
has been designed with integrated rear cable
management to provide easy routing and
strain relief.
Ports are numerically identified and offer
maximum space for ease of port numbering
and panels are supplied with cable ties, panel
mounting kit and earth cable. All panels are also
backward compatible.
PRODUCT CHARACTERISTICS
Width: 19” (483mm)
Height: 1u (44.45mm)
Depth: 111mm
Outlet Style: Unkeyed RJ-45
Outlets: 24 ports
Colour: RAL 9005 Black or
RAL 7035 Grey
Punch down blocks: LSA style IDC
Conformance: Augmented Category 6
and Class EA
EN 50173-1
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
Description Colour Part number
10GPlus 1U Shielded 24 Port Patch Panel
10GPlus 1U Shielded 24 Port Patch Panel
10GPlus Replacement Panel Module
AC6PNLF240K2M
AC6PNLF240K8M
AC6CPF060K
Black
Grey
Metallic
17
482.60
21.80
110
6250MHz
5e100MHz
AC6500MHz
Brand-Rex Copper Connectivity - 10GPlusAugmented Category 6 Half U 24 Port Patch Panel
24 ports in a ½U space
True Augmented Category 6/Class EA
performance
Suitable for 10Gigabit Applications
Ideal for the datacentre and for server cabinets
where space is at a premium
Removable plug and play modular cassettes
ideal for both on and off site termination
assembly
Integral cable management to provide
strain relief
Compatible with standard 19” racks and cabinets
Flexible solution - panel can be deployed in
either a conventional installation or the module
used as a consolidation point
Supplied with panel mounting accessory kit
PRODUCT DESCRIPTION
The Brand-Rex 10GPlus ½U patch panel offers true
is ideal applications where space is at a premium
and a high density solution is required. The panel
features 4 easy to remove shielded modular units
each comprising of 6 ports.
All panels are backward compatible and offer
integrated cable management to provide strain
relief. Ports are numerically identified and offer
maximum space for ease of port numbering
and panels are supplied with cable ties, panel
mounting kit and earth cable.
PRODUCT CHARACTERISTICS
Width: 19” (483mm)
Height: ½ u (22mm)
Depth: 111mm
Outlet Style: Unkeyed RJ-45
Outlets: 24 ports
Colour: RAL 9005 Black or
RAL 7035 Grey
Punch down blocks: LSA style IDC
Conformance: Augmented Category 6
and Class EA
EN 50173-1
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
Description Colour Part number
10GPlus ½U Shielded 24 Port Patch Panel
10GPlus ½U Shielded 24 Port Patch Panel
10GPlus Replacement Panel Module
AC6PNLF240K2H
AC6PNLF240K8H
AC6CPF060K
Black
Grey
Metallic
18
93.1
107.2
20.5
6250MHz
5e100MHz
AC6500MHz
Brand-Rex Copper Connectivity - 10GPlusAugmented Category 6 Consolidation Point Module
6 way shielded module
True Augmented Category 6/Class EA
performance
Suitable for 10Gigabit Applications
For use in horizontal cabling applications
Low profile construction – ideal for use in false
Removable cover to protect from dust particles
Optional mounting bracket
PRODUCT DESCRIPTION
The Brand-Rex 10GPlus Consolidation Point
EA Performance and is as flexible solution, ideal
for use in the open office environment.
Each module comprises of 6 RJ45 ports and can
be supplied as a low profile stand alone module
or with mounting bracket. The mounting bracket
option allows for secure fixing to walls, ceilings
and under floors, it also features cable tie points
for added security.
The cover can easily be removed to gain access
to the LSA IDC’s for termination. An area on top
of the cover is available for port identification.
All modules are backward compatible for Cat5e
and Cat6 systems. The module base and cover
are made from a lightweight construction which
offers excellent shielding characteristics.
PRODUCT CHARACTERISTICS
Without mounting bracket
Width: 107.2mm
Height: 20.5mm
Depth: 93.1mm
With mounting bracket
Width: 132mm
Height: 28mm
Depth: 110mm
Outlet Style: Unkeyed RJ-45
Outlets: 6 ports
Colour: Metallic
Punch down blocks: LSA style IDC
Conformance: Augmented Category 6
and Class EA
EN 50173-1
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
Description Colour Part number
10GPlus Consolidation Point Module - 6 Way
10GPlus Consolidation Point Module with mounting bracket - 6 Way
10GPlus 1U Patch Panel Chassis Only
10GPlus 1U Patch Panel Chassis Only
AC6CPF060K
AC6CPF060KM
AC6PNLC240K2H
AC6PNLC240K8H
AC6PNLC240K2M
AC6PNLC240K8M
Metallic
Metallic
Black
Grey
Black
Grey
19
6250MHz
AC6500MHz
5e100MHz
PRODUCT DESCRIPTION
The 10GPlus Shielded Tool-free Snap-in-
Jack is easy and quick to install, its compact
construction and multiple cable-entry
options make it the most flexible product
of its type available. It is smaller and
shorter than traditional products, allowing
it to fit more comfortably into confined
spaces. The jack also features an adjustable
management element allowing for a rear,
top or side-entry cable termination.
Designed for use in all structured cabling
environments including the general office and
data centres, the jack can be installed in patch
panels, wall outlets and floor box modules
to provide a robust and versatile solution.
The 10GPlus system is an Augmented
Category 6 and Class EA solution set that is
fully backwards compatible to Cat6 (Class E)
and Cat5e (Class D) products. The jack is fully
compatible with all our UK and Continental
style faceplates and patch panel products.
Independent 3rd Party Certification (3P)
PRODUCT CHARACTERISTICS
Outlet Style: Shielded keystone type
with unkeyed RJ-45 ports
Cable Entry: Rear
Hole Plate Thickness: Up to 1.6mm
Body Material: Zinc, Nickel plated
Jack Contacts: 50μin (1.27μm) gold over
nickel plating
Punch Down Blocks: Tool-Free with push down
cable manager for wire
AWG 22-27 solid
Wire Terminations: Tool-Free with cap
IDC Contacts: Tin plated titanium copper
Conformance: Conforms to all of the
physical reliability
requirements defined in
the IEC 60603-7 series of
568 C set (including ‘over-
stress’ testing up to 2,500
insertion cycles with
a standard plug).
Also available in Category 6
Brand-Rex Copper Connectivity – 10GPlus Tool-free Jack Augmented Category 6 Shielded Tool-free Snap-in-Jack
Part Number
AC6JAKS000
Description
Augmented Category 6 Shielded Tool-free Jack
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
Product Part Numbering
Qty per Pack
12
20
AC6500MHz
5e100MHz
6250MHz
31
36
46.6
23.6
23
.62
5.9
PRODUCT DESCRIPTION
The Brand-Rex 10GPlus Snap-In-Jack offers
true Class EA component performance using
a patented contact array design. The 10GPlus
system is classified as an Augmented Category 6
and Class EA product set that is fully backwards
compatible to Category 6 (Class E) and Category 5e
(Class D) products. The jack is also fully compatible
with all our UK and Continental style faceplates
and products.
PRODUCT CHARACTERISTICS
Outlet Style: Unshielded and
shielded Keystone
type with RJ-45 ports
Cable Entry: Top and Rear
Hole Plate Thickness: Jack will clip into sheet
material with a thickness
of 1.6mm max.
Body Material: High impact
PBT UL94 - VO
Jack Contacts: 50μin (1.27μm) gold over
nickel plating
Punch Down Blocks: LSA style IDC
IDC Contacts: Phosphor Bronze
Conformance: Category 6A
& amm1
EN50173-1 : 2007
Brand-Rex Copper Connectivity - 10GPlus JacksAugmented Category 6 Snap-In-Jacks
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
Part Number
Product Part Numbering
10GPlus Unshielded Snap-in-jack
10GPlus Unshielded Snap-in-jack
10GPlus Shielded Snap-in-jack
AC6JAKUOK2
AC6JAKUOK3
AC6JAKFOK2
Colour
Black
White
Metallic
Qty per Pack
12
12
12
21
6250MHz
AC6500MHz
5e100MHz
A U G M E N T E D C AT E G O R Y 6 S Y S T E M S
Brand-Rex Copper Connectivity - 10GPlus JacksAugmented Category 6 Unshielded Tool-free Jack PRODUCT DESCRIPTION
When used within a channel the tool-free
jack provides an industry leading electrical
performance and is fully compatible with Brand-
Rex UK and continental UNI style faceplates and
products. The jacks come supplied in boxes of 12;
termination instructions are on the rear of the
box. No termination tool is required. Each jack
has integral colour code wiring labels.
Independent 3rd Party Certification (3P)
PRODUCT CHARACTERISTICS
Outlet Style: Unshielded with
un-keyed RJ-45 port
Cable Entry: Rear, top and bottom
Colour: Black translucent
Body Materials: Polycarbonate UL94 – V0
Jack Contacts: 50μin (1.27μm) gold over
nickel plating
Termination Block Material: PBT UL94-V0
IDC Contacts: Titanium copper,
tin plated
Ammendments
EN 50173-1, EN 60603-7
Part Number
AC6JAKU002
Description
10G Unshielded Tool-free Jack
Product Part Numbering
22
BRAND-REX CATEGORY 7 AND 7A CABLING
Designed for use in Class F and FA systems
and backwards compatible to lower
classes.
Key Features
media cables that exceed the Category 7
and Category7A requirements of
of compliance (from 3P) are available
high bandwidth and high frequency
multi-media broadcast applications.
Suitable for cable sharing applications.
by individual screening of balanced
cable pairs.
systems and for providing a platform
for transmissions of multi-media and
broadcast technologies.
C AT E G O R Y 7 A N D 7 A S Y S T E M S
23
7600MHz
Brand-Rex Copper Cables - U-MediaPlus
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
Ω
Gigabit Ethernet protocol for installation in
horizontal and backbone areas.
PRODUCT PERFORMANCE
Core
Conductor: 23 AWG Plain Annealed
Copper Wire
Insulation: Cellular Polyolefin
Diameter: 1.36mm Nominal
Pair: 2 of the above cores
Tape Screen: Individual pair wrapped with
aluminium polyester tape,
applied metal side out
(Pair in Metal Foil)
Pair Colour: Blue-White, Orange-White,
Green-White, Brown-White
Final Assembly
Cable: 4 of the above screened pairs
Braid Screen: Tinned Annealed
Copper Wire
Sheath: LHSF
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: 20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
C AT E G O R Y 7 A N D 7 A S Y S T E M S
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MΩ.km @ 100-500 V test voltage
Min 80 db
0.5%
100% in process test
>5 GΩ.km
90 db
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Transfer Impendance
Coupling Attenuation up to 1Ghz
Electrical Characteristics @ 20°c Specification Typical Performance
Cable Standards
The cable is compliant with:
ISO/IEC 61156-5 ed2:2009 and
EN 50288-4-1
Sheath
TACW Braid
23 AWG PACW
Cellular Polyolefin Insulation
Frequency (MHz) 1 4 10 16 20 31.25 62.5 100 155 200 250 300 600
Insertion Loss (dB / 100m)Spec
Typical
NEXT (dB)Spec
Typical
PSNEXT (dB)Spec
Typical
ELFEXT (dB / 100m)Spec
Typical
PSELFEXT (dB / 100m)Spec
Typical
Return Loss (dB / 100m)Spec
Typical
Typical
Typical
ACR (dB / 100m)
PSACR (dB / 100m)
2.0
1.9
80.0
100.0
77.0
97.0
80.0
90.0
77.0
87.0
NA
27.0
98.1
95.1
2.0
1.9
80.0
100.0
77.0
97.0
80.0
90.0
77.0
87.0
NA
27.0
98.1
95.1
5.7
5.5
80.0
100.0
77.0
97.0
74.0
90.0
71.0
87.0
25.0
30.0
94.5
91.5
7.2
7.0
80.0
100.0
77.0
97.0
69.9
86.7
66.9
83.7
25.0
30.0
93.0
90.0
8.1
7.8
80.0
100.0
77.0
97.0
68.0
84.8
65.0
81.8
25.0
30.0
92.2
89.2
10.1
9.9
80.0
100.0
77.0
97.0
64.1
80.9
61.1
77.9
23.6
28.6
90.1
87.1
14.5
14.1
75.5
98.0
72.8
95.0
58.1
74.9
55.1
71.9
21.5
26.5
83.9
80.9
18.5
18.0
72.4
94.3
69.4
91.3
54.0
70.8
51.0
67.8
20.1
25.1
76.3
73.3
23.4
22.7
69.6
90.9
66.6
87.9
50.2
67.0
47.2
64.0
18.8
23.8
68.1
65.1
26.8
26.1
67.9
88.9
64.9
85.9
48.0
64.8
45.0
61.8
18.0
23.0
62.8
59.8
30.2
29.4
66.5
87.1
63.5
84.1
46.0
62.8
43.0
59.8
17.3
22.3
57.7
54.7
33.3
32.5
65.3
85.7
62.3
82.7
44.5
61.3
41.5
58.3
17.3
21.8
53.3
50.3
48.9
47.6
60.8
80.3
57.8
77.3
38.4
55.2
35.4
52.2
17.3
19.7
32.6
29.6
na
54.1
na
78.5
na
75.5
na
53.3
na
50.3
na
19.0
24.5
21.5
na
60.0
na
77.1
na
74.1
na
51.7
na
48.7
na
18.4
17.1
14.1
na
63.8
na
76.3
na
73.3
na
50.8
na
47.8
na
18.1
12.5
9.5
750 900 1000
Product Part Numbering
UM10-HF1-500VT
UM10-HF1-1000VT
UM10-HF1-D500VT
UM10-HF1-D1000VT
UM10-HF1-X-500BK
UM10-HF1-X-1000BK
UM10-HF3-500BU
UM10-HF3-1000BU
UM10-HF3-D500BU
UM10-HF3-D1000BU
IEC 60332-1-2
IEC 60332-1-2
–
IEC 60332-3-24
IEC 60332-3-24
500
1000
500
1000
500
1000
500
1000
500
1000
LSHF
LSHF
PE
LSHF
LSHF
Violet
Violet
Black
Blue
Blue
7.2
14.7 x 7.3
8.4
7.4
14.9 x 7.4
0.11
0.24
0.32
0.12
0.25
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
44
91
57
48
96
24
7600MHz
Brand-Rex Copper Cables – U-MediaPlus
PRODUCT DESCRIPTION
gigabit Ethernet protocol for installation in
horizontal and backbone areas
PRODUCT PERFORMANCE
Core
Core conductor: 22 AWG Plain Annealed
Copper Wire
Insulation: Cellular Polyolefin
Diameter: 1.5mm nominal
Pair: 2 of the above cores
Tape Screen: individual pairs wrapped
with aluminium polyester
tape applied metal side out
Final Assembly
Cable: 4 of the above shielded
pairs Tinned Annealed
Copper Wire
Sheath: LSHF
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x outer diameter
(installation) 4 x outer
diameter (operation)
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500mΩ.km @ 100-500 V test voltage
Min 80 db
0.5%
100% in process test
>5 gΩ.km
90 db
conductor loop resistance
conductor resistance unbalance
dielectric Strength
insulation resistance
capacitance unbalance to earth
Velocity of propagation
Skew
mean characteristic impendance
transfer impendance
coupling attenuation up to 1ghz
Electrical Characteristics @ 20°c Specification Typical Performance
Cable Standards
The cable is compliant with:
and ISO/IEC 61156-5
Frequency (MHz) 1 10 100 250 500 600 1000 1200
Insertion Loss (dB / 100m)Spec
Typical
NEXT (dB)Spec
Typical
PSNEXT (dB)Spec
Typical
ELFEXT (dB / 100m)Spec
Typical
PSELFEXT (dB / 100m)
PS ANEXT (dB / 100m)
PS AE LFEXT (dB / 100m)
Spec
Typical
Return Loss (dB / 100m)
Spec
Typical
TypicalACR (dB / 100m)
-
2.0
78
100
75
97
78
100
75
100
67
100
67
100
-
27
95
5.8
5.7
78
100
75
97
74
90
71
87
67
100
58
85
25
30
91
18.5
18.0
72
100
69
97
54
70
51
67
63
85
38
65
20
25
79
29.7
28.9
66
84
63
81
46
62
43
59
57
79
30
57
17
22
52
42.8
41.6
62
80
59
77
40
56
37
53
52
75
24
51
17
21
35
47.1
45.9
61
78
58
75
38
54
35
51
51
73
23
49
17
21
29
61.9
60.3
57
75
54
72
34
50
31
47
48
70
18
45
17
19
12
-
66.6
-
74
-
71
-
48
-
45
-
69
-
43
-
18
4
C AT E G O R Y 7 A N D 7 A S Y S T E M S
Product Part Numbering
UM12-HF1-500VT
UM12-HF1-1000VT
UM12-HF1-D500VT
UM12-HF1-D1000VT
UM12-HF3-500BU
UM12-HF3-1000BU
UM12-HF3-D500BU
UM12-HF3-D1000BU
500
1000
500
1000
500
1000
500
1000
LSHF
LSHF
LSHF
LSHF
Violet
Violet
Blue
Blue
7.55
15.2 x 7.55
7.75
7.75
65
131
59
121
0.15
0.31
0.20
0.41
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-3-24
IEC 60332-3-24
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
Spec
Typical
Spec
Typical
Sheath
TACW Braid
22 AWG PACW
Cellular Polyolefin Insulation
25
BRAND-REX CAT6PLUS SYSTEM
(CATEGORY 6 - CLASS E)
Key Features
performance cabling system, it is
interoperable with standards compliant
products and fully backwards compatible
to lower performances classes. Third party
independent certificates of compliance
are available for cables, component and
channel performance from 3P Testing and
GHMT Laboratories GmbH
Cat6Plus makes it a reliable and safe choice
of cabling to support Gigabit Ethernet.
bit error rate given the extra margin
afforded by Cat6Plus
10GBASE-T in any channel configuration.
(Subject to testing to IEC TR 24750)
applications up to 550MHz
(PoE and PoEP) applications including:
- VoIP
- WLAN access points
- Security cameras etc
and unshielded options
C AT E G O R Y 6 S Y S T E M S
26 26
The Cat6Plus System
Structured wiring systems comprising of Cat6Plus cables, patch leads and connectivity are designed to be compliant with the current
EN50173-1 (including IEEE802.3ab Gigabit Ethernet).
Cat6Plus is a premium grade cabling system that is characterised to 550MHz, its performance significantly exceeds the requirements
Brand-Rex Copper Cables - Cat6Plus Channel PerformanceUnshielded and Shielded systems
C AT E G O R Y 6 S Y S T E M S
Frequency (MHz)
Attenuation (dB)Typical
Spec
NEXT (dB)Typical
Spec
PSNEXT (dB)Typical
Spec
Return Loss (dB)Typical
Spec
ELFEXT (dB)Typical
Spec
PSELFEXT (dB)
Propagation Delay (ns)
Delay Skew (ns)
ACR (dB)
PSACR (dB)
Typical
Spec
Typical
Spec
Typical
Spec
Typical
Spec
Typical
Spec
1.9
2.1
80.7
65.0
78.6
62.0
28.0
19.0
78.3
63.3
75.3
60.3
520
580
<30
<50
78.8
62.9
76.7
59.9
3.5
4.0
71.0
63.0
68.8
60.5
25.0
19.0
66.2
51.2
63.2
48.2
505
562
<30
<50
67.6
59.0
65.3
56.5
5.5
6.3
64.6
56.6
62.3
54.0
23.0
19.0
58.3
43.3
55.3
40.3
500
555
<30
<50
59.1
50.2
56.8
47.7
7.0
8.0
61.2
53.2
58.9
50.6
22.0
18.0
54.2
39.2
51.2
36.2
500
553
<30
<50
54.3
45.2
51.9
42.6
7.8
9.0
59.6
51.6
57.2
49.0
21.5
17.5
52.2
37.2
49.2
34.2
500
552
<30
<50
51.8
42.6
49.4
39.9
9.8
11.4
56.4
48.4
54.0
45.7
20.5
16.5
48.4
33.4
45.4
30.4
500
550
<30
<50
46.6
37.0
44.1
34.3
14.2
16.5
51.4
43.4
48.8
40.6
19.0
14.0
42.3
27.3
39.3
24.3
500
549
<30
<50
37.2
26.9
34.6
24.1
18.4
21.3
47.9
39.9
45.3
37.1
18.0
12.0
38.3
23.3
35.3
20.3
500
548
<30
<50
29.6
18.6
26.9
15.8
20.8
24.1
46.3
38.3
43.6
35.4
17.5
11.0
36.3
21.3
33.3
18.3
500
547
<30
<50
25.5
14.2
22.9
11.3
23.4
27.2
44.7
36.7
42.0
33.8
17.0
10.1
34.5
19.5
31.5
16.5
500
547
<30
<50
21.3
9.51
8.6
6.6
25.0
29.2
43.8
35.8
41.1
32.9
16.8
9.6
33.4
18.4
30.4
15.4
500
547
<30
<50
18.7
6.6
16.0
3.7
27.0
31.5
42.8
34.8
40.1
31.9
16.5
9.0
32.2
17.2
29.2
14.2
500
547
<30
<50
15.8
3.3
13.1
0.3
30.6
35.9
41.1
33.1
38.3
30.2
16.0
8.0
30.3
15.3
27.3
12.3
500
546
<30
<50
10.5
-2.8
7.7
-5.8
37.2
35.6
32.8
15.3
22.4
19.4
500
<30
-1.6
-4.5
45.9
32.9
30.0
14.5
19.3
16.3
500
<30
-13.1
-15.9
48.6
32.2
29.3
14.3
18.4
15.4
500
<30
-16.5
-19.4
4 Connector Channel Performance
1 4 10 16 20 31.25 62.5 100 125 155 175 200 250 350 500 550
Channel
Central Computer Room
Patch Panel
Building
Riser
Outlet
Terminal
27
6250MHz
Brand-Rex Copper Cables - Cat6Plus
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
Ethernet protocol for installation in horizontal
and backbone areas.
PRODUCT PERFORMANCE
Core
Conductor: 23 AWG Plain Annealed
Copper Wire
Insulation: Polyolefin
Diameter: 1.00mm Nominal
Pair: 2 of the above cores
Pair Colour: Blue-White, Orange-White,
Green-White, Brown-White
Final Assembly
Cable: 4 of the above pairs cabled
together around a cross filler
Sheath: LSHF compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
Sheath
Cross Filler
Polyolefin
23 AWG PACW
Cable Standards
The cable is compliant with:
and ANSI/TIA/EIA 568C
C AT E G O R Y 6 S Y S T E M S
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MΩ.km @ 100-500 V test voltage
Min 40 dB
0.5%
100% in process test
>5 GΩ.km
56 dB
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Coupling Attenuation up to 1Ghz
Electrical Characteristics @ 20°c Specification Typical Performance
Frequency (MHz) 1 4 10 16 20 31.25 62.5 100 155 200 250 300 550
Insertion Loss (dB / 100m)Spec
Typical
NEXT (dB)Spec
Typical
PSNEXT (dB)Spec
Typical
ELFEXT (dB / 100m)Spec
Typical
PSELFEXT (dB / 100m)Spec
Typical
Return Loss (dB / 100m)Spec
Typical
Typical
Typical
ACR (dB / 100m)
PSACR (dB / 100m)
2.1
1.9
66.0
86.5
64.0
84.5
66.0
85.0
64.0
82.0
na
27.0
84.6
82.6
3.8
3.5
65.3
77.5
63.3
75.5
58.0
73.0
55.0
70.0
23.0
30.0
73.9
71.9
6.0
5.5
59.3
71.5
57.3
69.5
50.0
65.0
47.0
62.0
25.0
30.0
66.0
64.0
7.6
7.0
56.2
68.4
54.2
66.4
45.9
60.9
42.9
57.9
25.0
30.0
61.4
59.4
8.5
7.8
54.8
67.0
52.8
65.0
44.0
59.0
41.0
56.0
25.0
30.0
59.1
57.1
10.7
9.9
51.9
64.1
49.9
62.1
40.1
55.1
37.1
52.1
23.6
28.6
54.2
52.2
15.5
14.1
47.4
59.6
45.4
57.6
34.1
49.1
31.1
46.4
21.5
26.5
45.5
43.5
19.9
18.0
44.3
56.5
42.3
54.5
30.0
45.0
27.0
42.0
20.1
25.1
38.5
36.5
25.3
22.7
41.4
53.6
39.4
51.6
26.2
41.2
23.2
38.2
18.8
23.8
30.9
28.9
29.1
26.1
39.8
52.0
37.8
50.0
24.0
39.0
21.0
36.0
18.0
23.0
25.9
23.9
33.0
29.4
38.3
50.5
36.3
48.5
22.0
37.0
19.0
34.0
17.3
22.3
21.1
19.1
na
32.5
na
49.3
na
47.3
na
35.5
na
32.5
na
21.8
16.9
14.9
na
45.4
na
45.4
na
43.4
na
30.2
na
27.2
na
19.9
0.0
-2.0
C6U-HF1-Rlx-305VT
C6U-HF1-500VT
C6U-HF1-1000VT
C6U-HF1-D500VT
C6U-HF1-D1000VT
C6U-HF3-500BU
C6U-HF3-1000BU
C6U-HF3-D500BU
C6U-HF3-D1000BU
C6U-HF1-X-500BK
C6U-HF1-X-1000BK
305
500
1000
500
1000
500
1000
500
1000
500
1000
LSHF
LSHF
LSHF
LSHF
PE
Violet
Violet
Blue
Blue
Black
5.75
11.6 x 5.75
6.55
13.2 x 6.55
6.95
38
77
51
103
49
0.14
0.28
0.23
0.46
0.27
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-3-24
IEC 60332-3-24
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
Product Part Numbering
28
6250MHz
Brand-Rex Copper Cables – Cat6Plus
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
ethernet protocol for installation in horizontal
and backbone areas, PoE, PoEP a and broadband
video transmissions at frequencies as high as
550MHz.
PRODUCT PERFORMANCE
Core
Core conductor: 23 AWG Plain Annealed
Copper Wire
Insulation: Polyolefin
Diameter: 1.2mm nominal
Pair: 2 of the above cores
Tape Screen: Wrapped with aluminium
polyester tape
Final Assembly
Cable: 4 of the above pairs cabled
together around a cross filler
Drainwire: 0.5mm Tinned Annealed
Copper Wire
Tape Screen: Wrapped with aluminium
polyester tape, applied
metal side in
Sheath: LSHF
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x outer diameter
(installation) 4 x outer
diameter (operation)
Max 2%
1.0kV d.c. or 0.7kV a.c. for 1min
>500 MΩ.km @ 100-500V test voltage
100 Ω ± 5Ω @ 100 MHz
Min 55dB
0.2%
100% in process test
>5000 MΩ.km
100 Ω ± 3Ω @ 100 MHz
80dB
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Transfer Impendance
Coupling Attenuation up to 1Ghz
Electrical Characteristics @ 20°c Specification Typical Performance
Cable Standards
The cable is compliant with:
ISO/IEC 61156-5 and EN 50288-5-1
Frequency (MHz) 4 10 16 20 31.25 62.5 100 155 200 250 500
Insertion Loss (dB / 100m)Spec
Typical
NEXT (dB)Spec
Typical
PSNEXT (dB)Spec
Typical
ELFEXT (dB / 100m)Spec
Typical
PSELFEXT (dB / 100m)Spec
Typical
Return Loss (dB / 100m)Spec
Typical
Typical
Typical
ACR (dB / 100m)
PSACR (dB / 100m)
2.1
1.9
66.0
80.0
64.0
80.0
66.0
82.0
64.0
79.0
na
27.0
78.1
78.1
3.8
3.5
65.3
71.0
63.3
71.0
58.0
70.0
55.0
67.0
23.0
30.0
67.4
67.4
6.0
5.5
59.3
65.0
57.3
65.0
50.0
62.0
47.0
59.0
25.0
30.0
59.5
59.5
7.6
7.0
56.2
61.9
54.2
61.9
45.9
57.9
42.9
54.9
25.0
30.0
54.9
54.9
8.5
7.8
54.8
60.5
52.8
60.5
44.0
56.0
41.0
53.0
25.0
30.0
52.6
52.6
10.7
9.9
51.9
57.6
49.9
57.6
40.1
52.1
37.1
49.1
23.6
28.6
47.7
47.7
15.5
14.1
47.4
53.1
45.4
53.1
34.1
46.1
31.1
43.1
21.5
26.5
39.0
39.0
19.9
18.0
44.3
50.0
42.3
50.0
30.0
42.0
27.0
39.0
20.1
25.1
32.0
32.0
25.3
22.7
41.4
47.1
39.4
47.1
26.2
38.2
23.2
35.2
18.8
23.8
24.4
24.4
29.1
26.1
39.8
45.5
37.8
45.5
24.0
36.0
21.0
33.0
18.0
23.0
19.4
19.4
33.0
29.4
38.3
44.0
36.3
44.0
22.0
34.0
19.0
31.0
17.3
22.3
14.6
14.6
550 600
-
43.0
-
39.5
-
39.5
-
28.0
-
25.0
-
20.2
-3.5
-3.5
-
45.4
-
38.9
-
38.9
-
27.2
-
24.2
-
19.9
-6.5
-6.5
C AT E G O R Y 6 S Y S T E M S
Product Part Numbering
305
500
1000
500
1000
LSHF
LSHF
Violet
Violet
7.1
14.3 x 7.1
50
101
0.19
0.37
IEC 60332-1-2
IEC 60332-1-2
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
Sheath
Cross Filler
23 AWG PACW
Polyolefin Insulation
TACW Drainwire
29
6250MHz
Brand-Rex Copper Cables - Cat6Plus
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
Ethernet protocol for installation in horizontal
and backbone areas.
PRODUCT PERFORMANCE
Core
Conductor: 23 AWG Plain
Annealed Copper Wire
Insulation: Polyolefin
Diameter: 1.36mm Nominal
Pair: 2 of the above cores
Tape Screen: Individual pair wrapped with
aluminium polyester tape
applied metal side out
Pair Colour: Blue-White, Orange-White
Green-White, Brown-White
Final Assembly
Cable: 4 of the above pairs cabled
together around a cross filler
Drainwire: 0.5mm Tinned Annealed
Copper Wire
Sheath: LSHF compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MOhm @ 100-500 V test voltage
0.5%
100% in process test
>5 GOhm.km
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Transfer Impendance
Electrical Characteristics @ 20°c Specification Typical Performance
Cable Standards
The cable is compliant with:
and ANSI/TIA/EIA 568C
Sheath
Polyester Tape
Polyolefin Insulation
23 AWG PACW
TACW Drainwire
Frequency (MHz) 1 4 10 16 20 31.25 62.5 100 155 200 250
Insertion Loss (dB / 100m)Spec
Typical
NEXT (dB)Spec
Typical
PSNEXT (dB)Spec
Typical
ELFEXT (dB / 100m)Spec
Typical
PSELFEXT (dB / 100m)Spec
Typical
Return Loss (dB / 100m)Spec
Typical
Typical
Typical
ACR (dB / 100m)
PSACR (dB / 100m)
2.1
1.9
66.0
100.0
64.0
97.0
66.0
90.0
64.0
87.0
20.0
30.0
98.1
95.1
3.8
3.5
65.3
100.0
63.3
97.0
58.0
89.0
55.0
86.0
23.0
30.0
96.5
93.5
6.0
5.5
59.3
100.0
57.3
97.0
50.0
85.0
47.0
82.0
25.0
30.0
94.5
91.5
7.6
7.0
56.2
100.0
54.2
97.0
45.9
81.0
42.9
78.0
25.0
30.0
93.0
90.0
8.5
7.8
54.8
100.0
52.8
97.0
44.0
76.0
41.0
73.0
25.0
30.0
92.2
89.2
10.7
9.9
51.9
100.0
49.9
97.0
40.1
72.0
37.1
69.0
23.6
27.0
90.1
87.1
15.5
14.1
47.4
100.0
45.4
97.0
34.1
67.0
31.1
64.0
21.5
25.0
85.9
82.9
19.9
18.0
44.3
100.0
42.3
97.0
30.0
60.0
27.0
57.0
20.1
24.0
82.0
79.0
25.3
22.7
41.4
100.0
39.4
97.0
26.2
52.0
23.2
49.0
18.8
22.0
77.3
74.3
29.1
26.1
39.8
100.0
37.8
97.0
24.0
50.0
21.0
47.0
18.0
21.0
73.9
70.9
33.0
29.4
38.3
95.0
36.3
92.0
22.0
49.0
19.0
46.0
17.3
20.0
65.9
62.6
300 600
na
32.5
na
90.0
na
87.0
na
40.0
na
37.0
na
19.0
57.5
54.5
na
47.6
na
90.0
na
87.0
na
35.0
na
32.0
na
17.0
42.4
39.4
C AT E G O R Y 6 S Y S T E M S
Product Part Numbering
500
1000
500
1000
LSHF
LSHF
Violet
Violet
7.15
14.4 x 7.15
50
100
0.12
0.25
IEC 60332-1-2
IEC 60332-1-2
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
30
6250MHz
Brand-Rex Copper Cables - Cat6Plus
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
Ethernet protocol for installation in horizontal
and backbone areas.
PRODUCT PERFORMANCE
Core
Conductor: 23 AWG Plain
Annealed Copper Wire
Insulation: Cellular Polyolefin
Diameter: 1.36mm Nominal
Pair: 2 of the above cores
Tape Screen: Individual pair wrapped with
aluminium polyester tape
applied metal side out
Pair Colour: Blue-White, Orange-White
Green-White, Brown-White
Final Assembly
Cable: 4 of the above shielded pairs
Drainwire: Tinned Annealed
Copper Wire
Tape Screen: Wrapped with aluminium
polyester tape, applied metal
side in
Sheath: LSHF compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
Sheath
Cellular Polyolefin Insulation
23 AWG PACW
TACW Drainwire
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MΩ @ 100-500 V test voltage
Min 55 dB
0.5%
100% in process test
>500 MΩ.km
75 dB
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Transfer Impendance
Coupling Attenuation up to 1Ghz
Electrical Characteristics @ 20°c Specification Typical Performance
Cable Standards
The cable is compliant with:
and ANSI/TIA/EIA 568C
C AT E G O R Y 6 S Y S T E M S
Frequency (MHz) 1 4 10 16 20 31.25 62.5 100 155 200 250 300 600
Insertion Loss (dB / 100m)Spec
Typical
NEXT (dB)Spec
Typical
PSNEXT (dB)Spec
Typical
ELFEXT (dB / 100m)Spec
Typical
PSELFEXT (dB / 100m)Spec
Typical
Return Loss (dB / 100m)Spec
Typical
Typical
Typical
ACR (dB / 100m)
PSACR (dB / 100m)
2.1
1.9
66.0
100.0
64.0
97.0
66.0
90.0
64.0
88.0
23.0
30.0
96.5
93.5
3.8
3.5
65.3
100.0
63.3
97.0
58.0
89.0
55.0
86.0
23.0
30.0
96.5
93.5
6.0
5.5
59.3
100.0
57.3
97.0
50.0
85.0
47.0
82.0
25.0
30.0
94.5
91.5
7.6
7.0
56.2
100.0
54.2
97.0
45.9
81.0
42.9
78.0
25.0
30.0
93.0
90.0
8.5
7.8
54.8
100.0
52.8
97.0
44.0
76.0
41.0
73.0
25.0
30.0
92.2
89.2
10.7
9.9
51.9
100.0
49.9
97.0
40.1
72.0
37.1
69.0
23.6
27.0
90.1
87.1
15.5
14.1
47.4
100.0
45.4
97.0
34.1
67.0
31.1
64.0
21.5
25.0
85.5
82.9
19.9
18.0
44.3
100.0
42.3
97.0
30.0
60.0
27.0
57.0
20.1
24.0
82.0
79.0
25.3
22.7
41.4
100.0
39.4
97.0
26.2
52.0
23.2
49.0
18.8
22.0
77.3
74.3
29.1
26.1
39.8
100.0
37.8
97.0
24.0
50.0
21.0
47.0
18.0
21.0
74.0
71.0
33.0
29.4
38.3
95.0
36.3
92.0
22.0
49.0
19.0
46.0
17.3
20.0
65.6
62.6
na
32.5
na
90.0
na
87.0
na
40.0
na
37.0
na
19.0
57.5
54.5
na
47.6
na
90.0
na
87.0
na
35.0
na
32.0
na
17.0
42.4
39.4
Product Part Numbering
500
1000
500
1000
500
1000
LSHF
LSHF
LSHF
Violet
Violet
Blue
7.2
14.5 x 7.2
7.6
51
102
60
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-3-24
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
0.13
0.26
0.15
31
6250MHz
Brand-Rex Copper Cables - Cat6Plus
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
Ethernet protocol for installation in horizontal
and backbone areas.
PRODUCT PERFORMANCE
Core
Conductor: 23 AWG Plain
Annealed Copper Wire
Insulation: Cellular Polyolefin
Diameter: 1.36mm Nominal
Pair: 2 of the above cores
Tape Screen: Individual pair wrapped with
aluminium polyester tape
applied metal side out
Pair Colour: Blue-White, Orange-White
Green-White, Brown-White
Final Assembly
Cable: 4 of the above pairs
Braid Screen: Tinned Annealed
Copper Wire
Sheath: LSHF compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Mini Bend Radius: 8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
Sheath
TACW Braid
Cellular Polyolefin Insulation
23 AWG PACWCable Standards
The cable is compliant with:
and ANSI/TIA/EIA 568C
C AT E G O R Y 6 S Y S T E M S
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MΩ.km @ 100-500 V test voltage
Min 55 dB
0.5%
100% in process test
>5 GΩ.km
90 dB
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impendance
Transfer Impendance
Coupling Attenuation up to 1Ghz
Electrical Characteristics @ 20°c Specification Typical Performance
1 4 10 16 20 31.25 62.5 100 155 200 250 300 600
2.1
1.9
66.0
100.0
64.0
97.0
66.0
90.0
64.0
87.0
23.0
30.0
96.5
93.5
3.8
3.5
65.3
100.0
63.3
97.0
58.0
90.0
55.0
87.0
23.0
30.0
96.5
93.5
6.0
5.5
59.3
100.0
57.3
97.0
50.0
90.0
47.0
87.0
25.0
30.0
94.5
91.5
7.6
7.0
56.2
100.0
54.2
97.0
45.9
86.7
42.9
83.7
25.0
30.0
93.0
90.0
8.5
7.8
54.8
100.0
52.8
97.0
44.0
84.8
41.0
81.8
25.0
30.0
92.2
89.2
10.7
9.9
51.9
100.0
49.9
97.0
40.1
80.9
37.1
77.9
23.6
28.6
90.1
87.1
15.5
14.1
47.4
98.0
45.4
95.0
34.1
74.9
31.1
71.9
21.5
26.5
83.9
80.9
19.9
18.0
44.3
94.3
42.3
91.3
30.0
70.8
27.0
67.8
20.1
25.1
76.3
73.3
25.3
22.7
41.4
90.9
39.4
87.9
26.2
67.0
23.2
64.0
18.8
23.8
68.1
65.1
29.1
26.1
39.8
88.9
37.8
85.9
24.0
64.8
21.0
61.8
18.0
23.0
62.8
59.8
33.0
29.4
38.3
87.1
36.3
84.1
22.0
62.8
19.0
59.8
17.3
22.3
57.7
54.7
na
32.5
na
85.7
na
82.7
na6
1.3
na
58.3
na
21.8
53.3
50.3
na
47.6
na
80.3
na
77.3
na
55.2
na
52.2
na
19.7
32.6
29.6
Frequency (MHz)
Insertion Loss (dB / 100m)Spec
Typical
NEXT (dB)Spec
Typical
PSNEXT (dB)Spec
Typical
ELFEXT (dB / 100m)Spec
Typical
PSELFEXT (dB / 100m)Spec
Typical
Return Loss (dB / 100m)Spec
Typical
Typical
Typical
ACR (dB / 100m)
PSACR (dB / 100m)
Product Part Numbering
500
1000
500
1000
500
1000
LSHF
LSHF
LSHF
Violet
Violet
Blue
7.2
14.5 x 7.4
7.6
44
91
48
0.11
0.24
0.12
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-3-24
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
32
6250MHz
SFTP
MMCPCCHB001
MMCPCCHB002
MMCPCCHB003
MMCPCCHB004
MMCPCCHB005
MMCPCCHB006
Part Number
PRODUCT DESCRIPTION
Brand-Rex Cat6Plus patch cords enable
you to get the optimum performance
from your cabling system. Our factory
made and tested patch cords offer you
guaranteed quality, and ensure that
your system avoids the performance
degradation which inferior alternatives will
give you at high data rates. All patch cords
are supplied with boots and ID tag.
Independent 3rd Party Certification (3P)
Packaging
easy tear bags
in bags of 10 for standard cords
Brand-Rex Copper Patch Cords - Cat6PlusCategory 6 Patch Cords
Part Number Format
C6C-PC-A-bbb-cde-F
Compliant with ISO/IEC 61935-2
UTP
C AT E G O R Y 6 S Y S T E M S
U 24AWG UTP
S 27AWG SFTP
S Solid
X Crossover
BB Blade style
H Standard
010 1 metre
020 2 metre
030 3 metre
050 5 metre
Additional lengths on request
1 Red
4 Blue
5 Green
6 Yellow
8 Grey
A - Cord Type bbb - Cord Length cde - Colour Scheme
(c) Cable
1 Red
4 Blue
5 Green
6 Yellow
8 Grey
(d) Boot 1
1 Red
4 Blue
5 Green
6 Yellow
8 Grey
(e) Boot 2
F - Speciality Tag
Additional colours on request
Product Part Numbering
Product Part Numbering
Non standard colour and length options are available to order on request.
Red Blue Green Yellow
C6CPCU010-111BB
C6CPCU020-111BB
C6CPCU030-111BB
C6CPCU050-111BB
C6CPCS010-188HB
C6CPCS020-188HB
C6CPCS030-188HB
C6CPCS050-188HB
C6CPCU010-444BB
C6CPCU020-444BB
C6CPCU030-444BB
C6CPCU050-444BB
C6CPCS010-488HB
C6CPCS020-488HB
C6CPCS030-488HB
C6CPCS050-488HB
C6CPCU010-555BB
C6CPCU020-555BB
C6CPCU030-555BB
C6CPCU050-555BB
C6CPCS010-588HB
C6CPCS020-588HB
C6CPCS030-588HB
C6CPCS050-588HB
C6CPCU010-666BB
C6CPCU020-666BB
C6CPCU030-666BB
C6CPCU050-666BB
C6CPCS010-688HB
C6CPCS020-688HB
C6CPCS030-688HB
C6CPCS050-688HB
24 AWG UTP - 1.0m
24 AWG UTP - 2.0m
24 AWG UTP - 3.0m
24 AWG UTP - 5.0m
27 AWG SFTP - 1.0m
27 AWG SFTP - 2.0m
27 AWG SFTP - 3.0m
27 AWG SFTP - 5.0m
C6CPCU010-888BB
C6CPCU020-888BB
C6CPCU030-888BB
C6CPCU050-888BB
C6CPCS010-888HB
C6CPCS020-888HB
C6CPCS030-888HB
C6CPCS050-888HB
Grey
SFTP Patch Cord Clip – Red
SFTP Patch Cord Clip – Black
SFTP Patch Cord Clip – White
SFTP Patch Cord Clip – Blue
SFTP Patch Cord Clip – Green
SFTP Patch Cord Clip – Yellow
100
100
100
100
100
100
Description Qty
33
483
132
44
.1
6250MHz
PRODUCT DESCRIPTION
The Cat6Plus 19" rack mounted patch panel offers
true Category 6 component performance using
a new patented contact pin array design.
All panels are backward compatible. The modular
jacks that are used in blocks of 8 are individually
shielded to give superior shielding.
In addition to this, each panel has been designed
built into the rear. All outlets are numerically
identified with an additional writable surface for
ease of port naming. Each panel is supplied with
cable ties, panel mounting accessories and short
form installation instructions.
PRODUCT CHARACTERISTICS
Panel Width: 19" (483mm)
Panel Height: 1U (44.1mm)
Panel Depth: 132mm
Outlet Style: Unkeyed RJ-45
Outlets: 24 ports
Colour: RAL 9005 Black
or RAL 7035 Grey
Punch Down Blocks: LSA style IDC
Conformance: Category 6
AMMENDMENTS
EN50173-1
Brand-Rex Copper Connectivity - Cat6Plus PanelsCategory 6 Panel with cable management
24 Port
Product Part Numbering
Shielded Panel LSA Style - Black
Shielded Panel LSA Style - Grey
Unshielded Panel LSA Style - Black
Unshielded Panel 110 Style - Black
C6CPNLF240K2M
C6CPNLF240K8M
C6CPNLU240K2M
C6CPNLU24012M
C AT E G O R Y 6 S Y S T E M S
34
6250MHz
C AT E G O R Y 6 S Y S T E M S
Lighter & narrower than conventional
patch panels
Ideal for server cabinets where space is a factor
Ideal for small projects with space restrictions
Suitable for the small telecom enclosure
approach
and cabinets.
PRODUCT DESCRIPTION
Shielded and Unshielded patch panels offer a
port density which delivers 48 terminations in a
single U height with true Category 6 component
performance using a patented contact pin array
design. The robust and easy to install patch panel
employs a conventional termination method that
affords the installer the maximum punch down
accessibility for wire termination.
To assure the optimum link performance the
panel has been designed with integral rear cable
management which provides easy routing and
strain relief for the high performance cabling.
introduces shielded mounting clips to assure
optimum earthing of the cable screens.
PRODUCT CHARACTERISTICS
Panel Width: 19” (483mm)
Panel Height: ½ U (22mm)
Panel Depth: 105mm
Outlet Style: Unkeyed RJ-45
Outlets: 24 ports
Colour: RAL 9005 Black or
RAL 7035 Grey
Punch Down Blocks: LSA style IDC
Conformance: Category 6
AMMENDMENT EN 50173-1
Brand-Rex Copper Connectivity – Cat6Plus PanelsCategory 6 Half U 24 Port Patch Panel
Part Number
C6CPNLU240K2H
C6CPNLU240K8H
C6CPNLF240K2H
C6CPNLF240K8H
Description
Cat6Plus ½ U 24 Port Unshielded Panel
Cat6Plus ½ U 24 Port Unshielded Panel
Cat6Plus ½ U 24 Port Shielded Panel
Cat6Plus ½ U 24 Port Shielded Panel
Colour
Black
Grey
Black
Grey
Unshielded
Shielded
Product Part Numbering
35
6250MHz
5e100MHz
Part Number
C6CJAKS000
Description
Category 6 Shielded Tool-Free Jack
Qty per Pack
12
PRODUCT DESCRIPTION
The Cat6Plus Shielded Tool-free Snap-in-Jack is
easy and quick to install, its compact construction
and multiple cable-entry options make it the
most flexible product of its type available. It is
smaller and shorter than traditional products,
allowing it to fit more comfortably into confined
spaces. The jack also features an adjustable
management element allowing for a rear, top or
side-entry cable termination.
Designed for use in all structured cabling
environments including the general office and
data centres, the jack can be installed in patch
panels, wall outlets and floor box modules to
provide a robust and versatile solution.
The Cat6Plus system is a Category 6 and Class E
solution set that is fully backwards compatible
to Cat5e (Class D) products. The jack is fully
compatible with all our UK and Continental style
faceplates and patch panel products
PRODUCT CHARACTERISTICS
Outlet Style: Shielded keystone type with
unkeyed RJ-45 ports
Cable Entry: Rear
Hole Plate Thickness: Up to 1.6mm
Body Material: Zinc
Jack Contacts: 50μin (1.27μm) gold over
nickel plating
Punch Down Blocks: Tool-free with push down
cable manager for wire AWG
22-27 solid
Wire Terminations: Tool-Free with cap
IDC Contacts: Tin plated titanium copper
Conformance: Category 6 compliant – can
support 10GBASE-T in a
channel configuration.
Conforms to all of the
physical reliability
requirements defined in
the IEC 60603-7 series of
TIA 568 C set (including
‘over-stress’ testing up to
2,500 insertion cycles with a
standard plug).
Also available in Augmented Category 6
Brand-Rex Copper Connectivity – Cat6Plus Tool-free Jack Category 6 Shielded Tool-free Snap-in-Jack
C AT E G O R Y 6 S Y S T E M S
Product Part Numbering
36
6250MHz
31
21.6
46.6
23.6
23
.62
1.9
Brand-Rex Copper Connectivity - Cat6Plus JacksCategory 6 Snap-In-Jacks
PRODUCT DESCRIPTION
The Brand-Rex Cat6Plus Snap-In-Jack offers
true Category 6 component performance using
a new patented contact array design. The jack
is backward compatible and also fully compatible
with all our UK and continental style faceplates
and products. Jacks are supplied with a short
form installation instruction.
PRODUCT CHARACTERISTICS
Outlet Style: Unshielded and
shielded Keystone
type with RJ-45 ports
Cable Entry: Top and Rear
Hole Plate Thickness: Jack will clip into sheet
material with a thickness
of 1.6mm max.
Body Material: High impact
PBT UL94 - VO
Jack Contacts: 50μin (1.27μm)
over nickel plating
Punch Down Blocks: LSA (Shielded)
LSA or 110 (Unshielded)
style IDC
IDC Contacts: Phosphor Bronze
Conformance: Category 6
amm1
EN50173-1 : 2007
Approval: (3P) Independent
3rd Party CertificationUnshielded Shielded
Product Part Numbering
LSA Style - Black
LSA Style - White
110 Style - Black
110 Style - White
C6CJAKU0K2
C6CJAKU0K3
C6CJAKU012
C6CJAKU013
C6CJAKF0K2
-
-
-
C AT E G O R Y 6 S Y S T E M S
Other colours available on request.
37
6250MHz
5e100MHz
PRODUCT DESCRIPTION
The Tool-free Jack offers true Cat6 performance
and is fully compatible with Brand-Rex UK and
continental UNI style faceplates and products.
The jacks come supplied in boxes of 12;
termination instructions are on the rear of the
box. No termination tool is required. Each jack
has integral colour code wiring labels.
PRODUCT CHARACTERISTICS
Outlet Style: Unshielded with
un-keyed RJ-45 port
Cable Entry: Rear, top and bottom
Colour: Black translucent
Body Materials: UL94 – V0
Jack Contacts: 50μin (1.27μm)
gold over nickel plating
Termination Block Material: UL94-V0
IDC Contacts: Titanium copper, tin plated
Conformance: Category 6
AMMENDMENT
EN 50173-1 : 2002
Part Number
C6CJAKU002Category 6 Unshielded Tool-free Jack
C AT E G O R Y 6 S Y S T E M S
Brand-Rex Copper Connectivity - Cat6Plus JacksCategory 6 Unshielded Tool-free Jack
Product Part Numbering
38
6250MHz
Brand-Rex Copper Connectivity - Cat6Plus OutletsCategory 6 Triple Shuttered Outlet
PRODUCT DESCRIPTION
The Brand-Rex Cat6Plus Unshielded Triple
Outlet offers a high density outlet solution
with true Category 6 component performance.
The outlet is backward compatible with our UK
and continental UNI style faceplates providing
a 3 or 6 RJ-45 solution for high density
outlet installations.
Each outlet is fitted with a removable label
protector with individual rear cable anchors
and colour wiring detail. Every outlet is supplied
in an easy tear pack with a shortform installation
instruction, paper label and cable ties.
PRODUCT CHARACTERISTICS
Outlet Style: Unkeyed RJ-45
style compatible
Backbox: Minimum 32mm depth
Colour: RAL 9010 White
Weight: 46g
Body Material: ABS
Jack Contacts: 50μin (1.27μm)
gold over nickel plating
Plating: 50μm gold over
100μm nickel
Punch Down Blocks: 110 Style IDC
Conformance: Category 6
EN50173-1:2007
Unshielded
Product Part Numbering
Triple Outlet - White C6CTWOU013
C AT E G O R Y 6 S Y S T E M S
39
6250MHz
69.90
33
69
35
40
.5
PRODUCT DESCRIPTION
The Brand-Rex combined shielded outlet and
RJ-45 socket has the same proven Category 6
performance as our Cat6Plus panels. Primarily
designed for mounting into duct or trunking
using a 45mm diameter hole, the outlet can
be either flush or wall mounted by using the
80 x 80mm continental styled faceplate and
33mm back box.
PRODUCT CHARACTERISTICS
Outlet Style: Shielded Keystone
type with unkeyed
RJ-45 ports
Cable Entry: Horizontal and Vertical
Colour: RAL 1013 Ivory
RAL 9010 White
Body Material: High impact
PPO UL94 - VO
Zinc Alloy Diecast
closed housing
Jack Contacts: 50μin (1.27μm)
gold over nickel plating
Plating: 50 μm gold over
100 μm of nickel
Punch Down
Blocks: LSA style IDC
IDC Contacts: Phosphor Bronze
EN50173-1
Brand-Rex Copper Connectivity - Cat6Plus OutletsCategory 6 European Style Outlet
C AT E G O R Y 6 S Y S T E M S
Product Part Numbering
White Ivory
18870NB
18879NB
07058GF
18870NA
18879NA
07058GE
1 Way Shielded Outlet
2 Way Shielded Outlet
80mm x 80mm Faceplate and Back Box
40
6250MHz
C AT E G O R Y 6 S Y S T E M S
TOWER UNITS PRODUCT DESCRIPTION
The tower mount frame provides a modular,
high density, cross-connect and cable
management system. The base tower is
supplied as a 288 pair unit but the capacity
can be increased using additional extension
frames. Tower units are supplied with wiring
bases and connector blocks for 288 pair.
PRODUCT CHARACTERISTICS
Material: Mild steel,
Black powder coated
Dimensions:
288 pair mounting frame
546.1 x 215.9 x 235.0mm
288 pair extension mounting frame
416.0 x 215.9 x 88.9mm
Vertical cable organiser
546.1 x 215.9 x 235.0mm
Vertical cable organiser extension
426.5 x 215.9 x 228.6mm
PATCHCORD PRODUCT DESCRIPTION
Cross-connect patchcords are available in 110
to 110 style or 110 to RJ45 style. The standard
Category 6 110 connector is supplied in a 4 pair
version only.
PRODUCT CHARACTERISTICS
Conformance: Category 6
Cord type: Grey 24AWG UTP 110 – 110
Dimensions: 50.2 x 30.9 x 9.0mm
Temperature Range: 0 to 50 °C (installation)
-20 to 75 °C (operational)
Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect Category 6 Cross-Connect Tower Units and Patchcord
Tower Unit Product Part Numbering
110 Tower, 288 pair mounting frame
110 Tower, 288 pair extension mounting frame
C6C110TWR288P
C6C110TWR288PE
110 – 110 110 – RJ45
Cross Connect Patch Cord - 1.0m C6C110110PC010 C6C110RJ4PC010
Cross Connect Patch Cord - 1.5m C6C110110PC015 C6C110RJ4PC015
Cross Connect Patch Cord - 2.0m C6C110110PC020 C6C110RJ4PC020
Cross Connect Patch Cord - 3.0m C6C110110PC030 C6C110RJ4PC030
Cross Connect Patch Cord - 4.0m C6C110110PC040 C6C110RJ4PC040
Cross Connect Patch Cord - 5.0m C6C110110PC050 C6C110RJ4PC050
Patchcord Product Part Numbering
41
Brand-Rex Copper Connectivity - Cat6Plus Cross-Connect Category 6 Cross-Connect Insertion Tool and Wiring Bases and
Connector Blocks
PRODUCT DESCRIPTION
Insertion Tool
To ensure correct termination of Brand-Rex’s
Category 6 Cross Connect solution it is advised
to use a specially designed Insertion tool.
The insertion tool is used to simultaneously
terminate the 4 pairs onto Category 6 Cross
Connect wiring bases and underneath the
Category 6 connector block. A Replacement
Head is also available when the tool
becomes worn.
Wiring Base
The Category 6 110 wiring base can be supplied as
a 48, 96 or 288 pair version, with or without legs. It
can also be supplied rack mounted as
a 96, 192 or 288 pair version. Designation
labels are included with the bases.
48 Pair Wiring Base Kits
A typical kit for a 48 pair wiring base
includes a basic wiring base and 12 off
4 pair connector blocks.
96 Pair Wiring Base Kits
A typical kit for a rack mounted 96 pair wiring base
includes 2 off 48 pair wiring base and
24 off 4 pair connector blocks.
Connector Block
The 4 pair connector is specifically designed to
exceed Category 6 performance, has a robust
design and is colour coded for easy identification.
The connector is supplied in bags of 10.
PRODUCT CHARACTERISTICS
Conformance: Category 6
Connector Block
Material: Flame retardent
thermoplastic rated
UL94V-0, off-white
Wiring Base
Material: Flame retardent
thermoplastic rated
UL94V-0, off-white
Contact Material: Copper Alloy, tin plated
C AT E G O R Y 6 S Y S T E M S
Product Part Numbering
Category 6 110 4 pair Insertion Tool C6C1104PIT
Category 6 110 4 pair Replacement Head C6C1104PITRH
Category 6 110 wiring base 48 pair with legs C6C110WB48PL
Category 6 110 wiring base 48 pair without legs C6C110WB48P
Category 6 110 wiring base 48 pair with legs, Kit C6C110WB48PLK
Category 6 110 wiring base 48 pair without legs, Kit C6C110WB48PK
Category 6 110 wiring base 96 pair with legs C6C110WB96PL
Category 6 110 wiring base 96 pair without legs C6C110WB96P
Category 6 110 wiring base 96 pair with legs, Kit C6C110WB96PLK
Category 6 110 wiring base 96 pair without legs, Kit C6C110WB96PK
Category 6 110 wiring base 288 pair with legs C6C110WB288PL
Category 6 110 wiring base 288 pair without legs C6C110WB288P
Category 6 110 wiring base 288 pair with legs, Kit C6C110WB288PLK
Category 6 110 wiring base 288 pair without legs, Kit C6C110WB288PK
Category 6 110 wiring base 96 pair rack mounted, Kit C6C110WB96PRK
Category 6 110 wiring base 192 pair rack mounted, Kit C6C110WB192PRK
Category 6 110 wiring base 288 pair rack mounted, Kit C6C110WB288PRK
Category 6 110 Connector Block C6C110CB4P
Vertical Cable Organiser for 110 Tower CMV110TWR
Vertical Cable Organiser Extension for 110 Tower CMV110TWRE
42
BRAND-REX GIGAPLUS SYSTEM
(CATEGORY 5E - CLASS D)
Key Features
open system
EIA 568C
by 3P and GHMT
cost-effective and flexible Cat5e
cabling system solution for running
today’s LAN protocols and high speed
applications such as 1000Base-T
of system margins that exceed
the standards
and unshielded options
backwards compatible
hostile environments, contact
Brand-Rex for recommendations
and advice
and PoEP) compatible and supports
- VoIP
- Wireless LAN access points
- Security cameras
C AT E G O R Y 5 E S Y S T E M S
43
The GigaPlus System
Structured wiring systems comprising of GigaPlus cables, patch cords and connectivity are designed to be compliant with the current
(including Gigabit Ethernet).
GigaPlus is a premium grade cabling system that is characterised to 250MHz. Its performance significantly exceeds the requirements
Brand-Rex Copper Cables - GigaPlus Channel PerformanceShielded and Unshielded Systems
C AT E G O R Y 5 E S Y S T E M S
4 Connector Channel Performance
Frequency (MHz) 1 4 10 16 20 31.25 62.5 100 125 155 175 200
Attenuation (dB)Typical
Spec
NEXT (dB)Typical
Spec
PSNEXT (dB)Typical
Spec
Return Loss (dB)Typical
Spec
ELFEXT (dB)Typical
Spec
PSELFEXT (dB)
Propagation Delay (ns)
Delay Skew (ns)
Typical
Spec
Typical
Spec
Typical
Spec
Typical
TypicalACR (dB / 100m)
PSACR (dB / 100m)
Alien NEXT (dB)
2.0
2.3
73.6
60.0
70.6
57.0
22.0
17.0
70.0
57.4
67.0
54.4
520
<555
<20
<50
71.6
68.6
103.6
4.0
4.6
62.3
53.5
59.3
50.5
22.0
17.0
57.9
45.3
54.9
54.4
510
<555
<20
<50
58.3
55.3
92.3
6.4
7.3
54.9
47.0
51.9
44.0
22.0
17.0
50.0
45.3
47.0
37.4
505
<555
<20
<50
48.5
45.5
84.9
8.1
9.3
51.0
43.6
48.0
40.6
22.0
17.0
45.9
33.3
42.9
30.3
503
<555
<20
<50
42.9
39.9
81.0
9.1
10.4
49.2
42.0
46.2
39.0
22.0
17.0
44.0
31.4
41.0
28.4
502
<555
<20
<50
40.0
37.0
79.2
11.5
13.2
45.5
38.7
42.5
35.7
20.1
15.1
40.1
27.5
37.1
24.5
501
<555
<20
<50
34.0
31.0
75.5
16.6
19.1
39.8
33.6
36.8
30.6
17.1
12.1
34.1
21.5
31.1
18.5
500
<555
<20
<50
23.2
20.2
69.8
21.3
24.7
35.9
30.1
32.9
27.1
15.0
10.0
30.0
17.4
27.0
14.4
500
<555
<20
<50
14.6
11.6
65.9
24.0
na
34.0
na
31.0
na
14.0
na
28.0
na
25.0
na
500
na
<20
na
10.0
7.0
64.0
27.0
na
32.2
na
29.2
na
13.1
na
26.2
na
23.2
na
500
na
<20
na
5.2
2.2
62.2
28.8
na
31.2
na
28.2
na
12.6
na
25.1
na
22.1
na
500
na
<20
na
2.4
-0.6
61.2
31.0
na
30.1
na
27.1
na
12.0
na
24.0
na
21.0
na
500
na
<20
na
-0.9
-3.9
60.1
250
32.5
na
30.1
na
29.7
na
11.8
na
26.4
na
24.6
na
505
na
<20
na
-0.8
-1.5
59.2Typical
Channel
Central Computer Room
Patch Panel
Building
Riser
Outlet
Terminal
44
5e100MHz
C AT E G O R Y 5 E S Y S T E M S
Brand-Rex Copper Cables - GigaPlus
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
Ethernet protocol for installation in horizontal
and backbone areas.
PRODUCT PERFORMANCE
Core
Conductor: 24 AWG Plain Annealed
Copper Wire
Insulation: Polyolefin
Diameter: 0.94mm Nominal
Pair: 2 of the above cores
Pair Colour: Blue-White, Orange-White,
Green-White, Brown-White
Final Assembly
Cable: 4 of the above pairs
Sheath: LSHF or for external cables
PE compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
Sheath
24 AWG PACW
Polyolefin InsulationCable Standards
The cable is compliant with:
and ANSI/TIA/EIA 568C
Frequency (MHz) 1 4 10 16 20 31.25 62.5 100 155 200
Insertion Loss (dB / 100m)Spec
Typical
NEXT (dB)Spec
Typical
PSNEXT (dB)Spec
Typical
ELFEXT (dB / 100m)Spec
Typical
PSELFEXT (dB / 100m)Spec
Typical
Return Loss (dB / 100m)Spec
Typical
4.0
3.6
56.3
64.3
53.3
62.3
51.8
66.8
48.8
64.8
23.1
28.0
60.7
58.7
6.3
5.8
50.3
58.3
47.3
56.3
43.8
58.8
40.8
56.8
25.0
30.0
52.5
50.5
8.0
7.4
47.3
55.2
44.2
53.2
39.7
54.7
36.7
52.7
25.0
30.0
47.8
45.8
9.0
8.3
45.8
53.8
42.8
51.8
37.8
52.8
34.8
50.8
25.0
30.0
45.5
43.5
11.4
10.5
42.9
50.9
39.9
48.9
33.9
48.9
30.9
46.9
23.6
38.6
40.4
38.4
16.5
15.3
38.4
46.4
35.4
44.4
27.9
42.9
24.9
40.9
21.5
26.5
31.1
29.1
21.3
19.8
35.3
43.3
32.3
41.3
23.8
38.8
20.8
36.8
20.1
25.1
23.5
21.5
na
25.4
na
40.4
na
38.4
na
35.0
na
33.0
na
23.8
15
13
na
29.4
na
38.8
na
36.8
na
32.8
na
30.8
na
23.0
9.4
7.4
ACR (dB / 100m)
PSACR (dB / 100m)
Typical
Typical
2.1
1.8
65.3
73.3
62.3
71.3
63.8
78.8
60.8
76.8
na
25.0
71.5
69.5
250
na
33.4
na
37.3
na
35.3
na
31.5
na
29.5
na
22.8
3.9
1.9
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MΩ.km @ 100-500 V test voltage
Min 40 dB
0.5%
100% in process test
>5 GΩ.km
50dB
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impedance
Coupling Attenuation up to 1Ghz
Electrical Characteristics @ 20°c Specification Typical Performance
Product Part Numbering
GPU-HF1-Rlx-305VT
GPU-HF1-500VT
GPU-HF1-1000VT
GPU-HF1-D500VT
GPU-HF1-D1000VT
GPU-HF3-500BU
GPU-HF3-1000BU
GPU-HF3-D500BU
GPU-HF3-D1000BU
GPU-HF1-X-500BK
GPU-HF1-X-1000BK
305
500
1000
500
1000
500
1000
500
1000
500
1000
LSHF
LSHF
LSHF
LSHF
PE
Violet
Violet
Blue
Blue
Black
4.85
10.0 x 4.95
5.65
11.4 x 5.65
6.1
30
63
41
82
40
0.09
0.19
0.17
0.34
0.21
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-3-24
IEC 60332-3-24
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
45
5e100MHz
Brand-Rex Copper Cables - GigaPlus
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
protection for installations in horizontal
and backbone areas.
PRODUCT PERFORMANCE
Core
Conductor: 24 AWG Plain
Annealed Copper Wire
Insulation: Polyolefin
Diameter: 1.07mm Nominal
Pair: 2 of the above cores
Pair Colour: Blue-White, Orange-White
Green-White, Brown-White
Final Assembly
Cable: 4 of the above pairs
Binder: Wrapped with polyester
tape, 100% coverage
Drainwire: 0.5mm Tinned
Annealed Copper Wire
Tape Screen: Wrapped with aluminium
polyester tape
applied metal side in
Sheath: LSHF compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
Sheath
24 AWG PACW
Polyolefin Insulation
TACW Drainwire
Cable Standards
The cable is compliant with:
and ANSI/TIA/EIA 568C
C AT E G O R Y 5 E S Y S T E M S
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MΩ.km @ 100-500 V test voltage
Min 55 dB
0.5%
100% in process test
>5 GΩ.km
75 dB
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impedance
Transfer Impedance
Coupling Attenuation up to 1Ghz
Electrical Characteristics @ 20°c Specification Typical Performance
Frequency (MHz) 1 4 10 16 20 31.25 62.5 100 155 200
Insertion Loss (dB / 100m)Spec
Typical
NEXT (dB)Spec
Typical
PSNEXT (dB)Spec
Typical
ELFEXT (dB / 100m)Spec
Typical
PSELFEXT (dB / 100m)Spec
Typical
Return Loss (dB / 100m)
ACR (dB / 100m)
PSACR (dB / 100m)
Spec
Typical
Typical
Typical
2.1
2.0
65.3
73.3
62.3
70.3
63.8
78.8
60.8
76.8
na
25.0
71.3
68.3
4.0
3.8
56.3
64.3
53.3
61.3
51.8
66.8
48.8
64.8
23.0
28.0
60.5
57.5
6.3
6.0
50.3
58.3
47.3
55.3
43.8
58.8
40.8
56.8
25.0
30.0
52.3
49.3
8.0
7.6
47.2
55.2
44.2
52.2
39.7
54.7
36.7
52.7
25.0
30.0
47.6
44.6
9.0
8.6
45.8
53.8
42.8
50.8
37.8
52.8
34.8
50.8
25.0
30.0
45.2
42.2
11.4
10.8
42.9
50.9
39.9
47.9
33.9
48.9
30.9
46.9
23.6
28.6
40.0
37.0
16.5
15.8
38.4
46.4
35.4
43.4
27.9
42.9
24.9
40.9
21.5
26.5
30.6
27.6
21.4
20.4
35.3
43.3
32.3
40.3
23.8
38.8
20.8
36.8
20.1
25.1
22.9
19.9
na
26.1
na
40.4
na
37.4
na
35.0
na
33.0
na
23.8
14.3
11.3
na
30.3
na
38.3
na
35.8
na
32.8
na
30.8
na
23.0
8.5
5.5
250
na
34.5
na
37.3
na
34.3
na
30.8
na
28.8
na
22.3
2.9
-0.1
Product Part Numbering
GPF-HF1-Rlx-305VT
GPF-HF1-500VT
GPF-HF1-1000VT
GPF-HF1-D500VT
GPF-HF1-D1000VT
GPF-HF3-500BU
GPF-HF3-1000BU
GPF-HF3-D500BU
GPF-HF3-D1000BU
GPF-HF1-X-500BK
GPF-HF1-X-1000BK
305
500
1000
500
1000
500
1000
500
1000
500
1000
LSHF
LSHF
LSHF
LSHF
PE
Violet
Violet
Blue
Blue
Black
5.9
12.1 x 6.0
6.5
13.1 x 6.5
7.4
37
78
46
92
49
0.12
0.25
0.19
0.38
0.26
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-3-24
IEC 60332-3-24
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
46
5e100MHz
Brand-Rex Copper Cables - GigaPlus
Independent 3rd Party Certification (3P)
PRODUCT DESCRIPTION
Ethernet protocol combined with exceptional
and backbone areas.
PRODUCT PERFORMANCE
Core
Conductor: 24 AWG Plain
Annealed Copper Wire
Insulation: Polyolefin
Diameter: 1.10mm Nominal
Pair: 2 of the above cores
Pair Colour: Blue-White, Orange-White
Green-White, Brown-White
Final Assembly
Cable: 4 of the above pairs
Binder: Wrapped with polyester tape
100% coverage
Tape Screen: Wrapped with aluminium
polyester tape
applied metal side out
Braid Screen: Tinned Annealed
Copper Wire
Sheath: LSHF compound
Mechanical and Environmental
Temp - Installation: 0°c to +50°c
Temp - Operation: -20°c to +75°c
Max Tensile Load: 10kg per simplex cable
(installation)
Min Bend Radius: 8 x Outer Diameter
(installation)
4 x Outer Diameter
(operation)
Sheath
TACW Braid
24 AWG PACW
Polyolefin Insulation
Max 2%
1.0kV dc or 0.7kV ac for 1 min
>500MΩ.km @ 100-500 V test voltage
Min 55 dB
0.5%
100% in process test
>5 GΩ.km
80 dB
Conductor Loop Resistance
Conductor Resistance Unbalance
Dielectric Strength
Insulation Resistance
Capacitance Unbalance to Earth
Velocity of Propagation
Skew
Mean Characteristic Impedance
Transfer Impedance
Coupling Attenuation up to 1Ghz
Electrical Characteristics @ 20°c Specification Typical Performance
Cable Standards
The cable is compliant with:
and ANSI/TIA/EIA 568C
C AT E G O R Y 5 E S Y S T E M S
Frequency (MHz) 1 4 10 16 20 31.25 62.5 100 155 200
Insertion Loss (dB / 100m)Spec
Typical
NEXT (dB)Spec
Typical
PSNEXT (dB)Spec
Typical
ELFEXT (dB / 100m)Spec
Typical
PSELFEXT (dB / 100m)Spec
Typical
Return Loss (dB / 100m)Spec
Typical
Typical
Typical
ACR (dB / 100m)
PSACR (dB / 100m)
2.1
2.0
65.3
73.3
62.3
70.3
63.8
78.8
60.8
76.8
na
25.0
71.3
68.3
4.0
3.8
56.3
64.3
53.3
61.3
51.8
66.8
48.8
64.8
23.0
28.0
60.5
57.5
6.3
6.0
50.3
58.3
47.3
55.3
43.8
58.8
40.8
56.8
25.0
30.0
52.3
49.3
8.0
7.6
47.2
55.2
44.2
52.2
39.7
54.7
36.7
52.7
25.0
30.0
47.6
44.6
9.0
8.6
45.8
53.8
42.8
50.8
37.8
52.8
34.8
50.8
25.0
30.0
45.2
42.2
11.4
10.8
42.9
50.9
39.9
47.9
33.9
48.9
30.9
46.9
23.6
28.6
40.0
37.0
16.5
15.8
38.4
46.4
35.4
43.4
27.9
42.9
24.9
40.9
21.5
26.5
30.6
27.6
21.4
20.4
35.3
43.3
32.3
40.3
23.8
38.8
20.8
36.8
20.1
25.1
22.9
19.9
na
26.1
na
40.4
na
37.4
na
35.0
na
33.0
na
23.8
14.3
11.3
na
30.3
na
38.3
na
35.8
na
32.8
na
30.8
na
23.0
8.5
5.5
250
na
34.5
na
37.3
na
34.3
na
30.8
na
28.8
na
22.3
2.9
-0.1
Product Part Numbering
GPS-HF1-500VT
GPS-HF1-1000VT
GPS-HF1-D500VT
GPS-HF1-D1000VT
GPS-HF3-500BU
GPS-HF3-1000BU
GPS-HF3-D500BU
GPS-HF3-D1000BU
500
1000
500
1000
500
1000
500
1000
LSHF
LSHF
LSHF
LSHF
Violet
Violet
Blue
Blue
6.3
6.3
6.9
13.9 x 6.9
48
96
58
116
0.13
0.26
0.21
0.42
IEC 60332-1-2
IEC 60332-1-2
IEC 60332-3-24
IEC 60332-3-24
Length (m) Cable type Colour
Nominal
Cable Diameter
(mm)
Nominal
Weight
(Kg/Km)
Calorific
Value
kWh/m
Fire
Safety
RatingPart Number
47
5e100MHz
Brand-Rex Copper Patch Cords - GigaPlus Category 5e Patch Cords
PRODUCT DESCRIPTION
Brand-Rex GigaPlus patch cords enable you to
get the optimum performance from your cabling
system. Our factory made and tested patch cords
offer you guaranteed quality, and ensure that
your system avoids the performance degradation
that inferior alternatives will give you at high data
rates. All patch cords are supplied with boots
and ID tag.
Independent 3rd Party Certification (3P)
Part Number Format
GPC-PC-A-bbb-cde-F
Compliant with ISO/IEC 61935-2
C AT E G O R Y 5 E S Y S T E M S
Red Blue Green Yellow
GPCPCU010-111HB
GPCPCU020-111HB
GPCPCU030-111HB
GPCPCU050-111HB
GPCPCF010-111H
GPCPCF020-111H
GPCPCF030-111H
GPCPCF050-111H
GPCPCU010-444HB
GPCPCU020-444HB
GPCPCU030-444HB
GPCPCU050-444HB
GPCPCF010-444H
GPCPCF020-444H
GPCPCF030-444H
GPCPCF050-444H
GPCPCU010-555HB
GPCPCU020-555HB
GPCPCU030-555HB
GPCPCU050-555HB
GPCPCF010-555H
GPCPCF020-555H
GPCPCF030-555H
GPCPCF050-555H
GPCPCU010-666HB
GPCPCU020-666HB
GPCPCU030-666HB
GPCPCU050-666HB
GPCPCF010-666H
GPCPCF020-666H
GPCPCF030-666H
GPCPCF050-666H
GPCPCU010-888HB
GPCPCU020-888HB
GPCPCU030-888HB
GPCPCU050-888HB
GPCPCF010-888H
GPCPCF020-888H
GPCPCF030-888H
GPCPCF050-888H
Grey
Product Part Numbering
Non standard colour and length options are available to order on request.
U
F
S Solid
X Crossover
HB Blade style
H Standard
010 1 metre
020 2 metre
030 3 metre
050 5 metre
Additional lengths on request
1 Red
4 Blue
5 Green
6 Yellow
8 Grey
A - Cord Type bbb - Cord Length cde - Colour Scheme
(c) Cable
1 Red
4 Blue
5 Green
6 Yellow
8 Grey
(d) Boot 1
1 Red
4 Blue
5 Green
6 Yellow
8 Grey
(e) Boot 2
F - Speciality Tag
Additional colours on request
48
483
5e100MHz
Brand-Rex Copper Connectivity - GigaPlus PanelsCategory 5e Panel - Unshielded
PRODUCT DESCRIPTION
The GigaPlus 19" rack mounted patch
panel offers true Category 5e component
performance using patented state of the art
printed circuit technology. All outlets are
numerically identified with an additional
writable surface for ease of port naming.
Each panel is supplied with cable ties,
panel mounting accessories and short form
installation instructions.
PRODUCT CHARACTERISTICS
Panel Width: 19” (483mm)
Panel Height: 24 port 1U (44.1mm)
48 port 2U (88.5mm)
Panel Depth: 33.50mm
Outlet Style: Unkeyed RJ-45
Colour: RAL 9005 Black
Punch Down Blocks: Universal style IDC
Amm1
EN50173-1 : 2007
C AT E G O R Y 5 E S Y S T E M S
Product Part Numbering
Universal IDC - Black
24 Port
GPCPNLU24002 GPCPNLU48002
48 Port
49
48344
.1
483
132
5e100MHz
C AT E G O R Y 5 E S Y S T E M S
Brand-Rex Copper Connectivity - GigaPlus PanelsCategory 5e Panel - with Cable Management
PRODUCT DESCRIPTION
The GigaPlus 19" rack mounted patch panel
offers true Category 5 component performance
using patented state of the art printed
circuit technology.
Available in 24 port versions, these panels have
into the rear mounted grounding bar. All outlets
are numerically identified with an additional
writable surface for ease of port naming. Each
panel is supplied with cable ties, panel mounting
accessories and short form
installation instructions.
PRODUCT CHARACTERISTICS
Panel Width: 19” (483mm)
Panel Height: 1U (44.1mm)
Panel Depth: 132.0mm
Outlet Style: Unkeyed RJ-45
Outlets: 24 ports
Colour: RAL 9005 Black
or RAL 7035 Grey
Punch Down Blocks: LSA or 110 style IDC
Amm1
EN50173-1 : 2007
Product Part Numbering
24 Port
Unshielded Panel 110 Style - Black
Shielded Panel LSA Style - Black
Shielded Panel 110 Style - Black
GPCPNLU24012M
GPCPNLF240K2M
GPCPNLF24012M
50
5e100MHz
Brand-Rex Copper Connectivity - GigaPlus JacksCategory 5e Snap-In Lead Frame Jacks - Shielded and Unshielded
PRODUCT DESCRIPTION
GigaPlus Shielded and Unshielded
Snap-In-Jacks offer true Category 5e component
performance. The jack is backward compatible
and also fully compatible with all our UK and
Continental style faceplates and products.
Each jack is supplied with a short form
installation instruction and stuffer cap.
PRODUCT CHARACTERISTICS
Keystone type with
unkeyed RJ-45 ports
Cable Entry: Top and Rear
Hole Plate Thickness: 1.60mm max
Body Material: Impact modified PPO
UL94 - V0 rated
Jack Contacts: 50μin (1.27μm)
over nickel plating
Punch Down Blocks: 110 style IDC
IDC Contacts: Phosphor Bronze
& Amm1
EN50173-1
Unshielded Shielded
Product Part Numbering
110 style white
C AT E G O R Y 5 E S Y S T E M S
GPCJAKU013LF GPCJAKF013LF
51
5e100MHz
Brand-Rex Copper Connectivity - GigaPlus JacksCategory 5e Snap-In-Jacks - Shielded and Unshielded
PRODUCT DESCRIPTION
GigaPlus Shielded and Unshielded
Snap-In-Jacks offer true Category 5e component
performance. The jacks are backward compatible
and also fully compatible with all our UK and
Continental style faceplates and products.
Each jack is supplied with a short form
installation instruction and cable tie.
PRODUCT CHARACTERISTICS
Keystone type with
unkeyed RJ-45 ports
Cable Entry: Top and Rear
Hole Plate Thickness: 1.60mm max
Body Material: Impact modified PBT
UL94 - V0 rated
Jack Contacts: 50μin (1.27μm)
gold over nickel plating
Punch Down Blocks: 110 or LSA style IDC
IDC Contacts: Phosphor Bronze
EN50173-1
C AT E G O R Y 5 E S Y S T E M S
Unshielded Shielded
LSA Style - Black
LSA Style - White
110 Style - Black
110 Style - White
-
GPCJAKU0K3
GPCJAKU012
GPCJAKU013
GPCJAKF0K2
-
GPCJAKF012
-
Other colours available on request.
Product Part Numbering
52
5e100MHz
PRODUCT DESCRIPTION
The Tool-free Jack offers true Cat5e performance
and is fully compatible with Brand-Rex UK and
continental UNI style faceplates and products.
The jacks come supplied in boxes of 12;
termination instructions are on the rear of the
box. No termination tool is required. Each jack
has integral colour code wiring labels.
PRODUCT CHARACTERISTICS
Outlet Style: Unshielded with
un-keyed RJ-45 port
Cable Entry: Rear, top and bottom
Colour: Black translucent
Body Materials: UL94 – V0
Jack Contacts: 50μin (1.27μm)
gold over nickel plating
Termination Block Material: UL94-V0
IDC Contacts: Titanium copper, tin plated
Conformance: IS11801 : 2002 & Amm1
EN50173-I : 2007
TIA568C
C AT E G O R Y 5 E S Y S T E M S
Product Part Number
GPCJAKU002
Description
Category 5e Unshielded Tool-free Jack
Brand-Rex Copper Connectivity - GigaPlus JacksCategory 5e Unshielded Tool-free Jack
Product Part Numbering
53
5e100MHz
25
50
25
7.4 25.2
50
18.6
38.6
25 18.6
C AT E G O R Y 5 E S Y S T E M S
PRODUCT DESCRIPTION
GigaPlus Slimline Shuttered Modules offer
true Category 5e component performance
and are fully compatible with Brand-Rex UK and
continental UNI style faceplates and products,
and are suitable for applications where internal
back box space is limited. Each jack is supplied
with a shortform installation instruction and a
cable tie to attach the cable to the cable anchor.
Modules are supplied with a colour code
wiring label.
PRODUCT CHARACTERISTICS
Keystone type with
unkeyed RJ-45 ports
Cable Entry: Rear and Top
Colour: Black or White
Body Material: High impact
ABS UL94 - VO
Jack Contacts: 50μin (1.27μm)
gold over nickel plating
Punch Down Blocks: Universal IDC
IDC Contacts: Phosphor Bronze
EN50173-1
Brand-Rex Copper Connectivity - GigaPlus ModulesCategory 5e Slimline Shuttered Modules - Shielded and Unshielded
Unshielded Shielded
Product Part Numbering
50mm x 25mm Slimline Shuttered Module - White
50mm x 25mm Slimline Shuttered Module - Black
38mm x 25mm Slimline Shuttered Module - White
38mm x 25mm Slimline Shuttered Module - Black
50mm x 25mm Angled Slimline Shuttered Module - White
50mm x 25mm Angled Slimline Shuttered Module - Black
GPCSL062UB03
GPCSL062UB02
GPCSL06CUB03
GPCSL06CUB02
GPCSLA62UB03
GPCSLA62UB02
GPCSL062SB03
GPCSL062SB02
GPCSL06CSB03
GPCSL06CSB02
GPCSLA62SB03
GPCSLA62SB02
54
5e100MHz
Brand-Rex Copper Connectivity - GigaPlus OutletsCategory 5e Triple Shuttered Outlet PRODUCT DESCRIPTION
The Brand-Rex GigaPlus Unshielded Triple
Outlet offers a high density outlet solution
with true Category 5e component performance.
The outlet is backward compatible with our UK
and continental UNI style faceplates providing
a 3 or 6 RJ-45 solution for high density outlet
installations.
Each outlet is fitted with a removable label
protector with individual rear cable anchors and
colour wiring detail. Every outlet is supplied in
an easy tear pack with a shortform installation
instruction, paper label and cable ties.
PRODUCT CHARACTERISTICS
Outlet Style: Unkeyed RJ-45
style compatible
Backbox: Minimum 32mm depth
Colour: RAL 9010 White
Body Material: ABS
Jack Contacts: 50μin (1.27μm)
gold over nickel plating
Style IDC
Conformance: Category 5e
568C
EN50173-1
Unshielded
Product Part Numbering
Triple Shuttered Module - White GPCTWOU003
C AT E G O R Y 5 E S Y S T E M S
55
69.90
33
69
5e100MHz
35
40
.5
PRODUCT DESCRIPTION
The Brand-Rex combined shielded outlet and
RJ-45 socket has the same true Category 5e
performance as our GigaPlus panels.
Primarily designed for mounting into duct or
trunking using a 45mm diameter hole, the outlet
can be either flush or wall mounted by using
the 80 x 80mm continental styled faceplate
and 33mm back box.
PRODUCT CHARACTERISTICS
Outlet Style: Shielded Keystone
type with unkeyed
RJ-45 ports
Cable Entry: Horizontal or Vertical
Colour: RAL 1013 Ivory
or RAL 9010 White
Body Material: High impact
PPO UL94 - VO
Jack Contacts: 50μin (1.27μm)
gold over nickel plating
Punch Down Blocks: LSA style IDC
IDC Contacts: Phosphor Bronze
EN50173-1
Brand-Rex Copper Connectivity - GigaPlus OutletsCategory 5e European Style Outlet
C AT E G O R Y 5 E S Y S T E M S
Product Part Numbering
2 Way Shielded Outlet
80 x 80 Faceplate and Back Box
White Ivory
GPCG245SU002
MMCWDOSMA002
GPCG245SU001
MMCWDOSMA001
56
5e100MHz
TOWER UNITS PRODUCT DESCRIPTION
The tower mount frame provides a modular,
high density, cross connect and cable
management system. The base tower is supplied
as a 300 pair unit but the capacity can be
increased using additional extension frames.
Tower units are supplied with wiring bases
and connector blocks for 300 pair.
PRODUCT CHARACTERISTICS
Material: Mild steel,
Black powder coated
Dimensions:
300 pair mounting frame
546.1 x 215.9 x 235.0mm
300 pair extension mounting frame
416.0 x 215.9 x 88.9mm
Vertical cable organiser
546.1 x 215.9 x 235.0mm
Vertical cable organiser extension
426.5 x 215.9 x 228.6mm
PATCHCORDS PRODUCT DESCRIPTION
Cross Connect patchcords are available in 110
to 110 style or 110 to RJ45 style. The standard
Category 5e 110 connector can be supplied
as a 4 pair or 1 pair version.
PRODUCT CHARACTERISTICS
Conformance: Category 5e
Cord type: Grey 24AWG UTP
Dimensions: 50.2 x 30.9 x 9.0mm (4 pair)
57.5 x 7.4 x 9.0mm (1 pair)
Temperature Range: 0 to 50 °C (installation)
-20 to 75 °C (operational)
Brand-Rex Copper Connectivity - GigaPlus Cross Connect Category 5e Cross Connect Tower Units and Patchcord
C AT E G O R Y 5 E S Y S T E M S
Tower Unit Product Part Numbering
Cat5e 110 Tower, 300 pair mounting frame
Cat5e 110 Tower, 300 pair extension mounting frame
GPC110TWR300P
GPC110TWR300PE
Patchcord Product Part Numbering
110 – 110 1 Pair 110 – 110 4 Pair 110 – RJ45
Cross Connect Patch Cord - 1.0m GPC110110PC010-1 GPC110110PC010-4 GPC110RJ4PC010
Cross Connect Patch Cord - 1.5m GPC110110PC015-1 GPC110110PC015-4 GPC110RJ4PC015
Cross Connect Patch Cord - 2.0m GPC110110PC020 -1 GPC110110PC020-4 GPC110RJ4PC020
Cross Connect Patch Cord - 3.0m GPC110110PC030-1 GPC110110PC030-4 GPC110RJ4PC030
Cross Connect Patch Cord - 4.0m GPC110110PC040-1 GPC110110PC040-4 GPC110RJ4PC040
Cross Connect Patch Cord - 5.0m GPC110110PC050 -1 GPC110110PC050-4 GPC110RJ4PC050
57
5e100MHz
PRODUCT DESCRIPTION
Wiring Base
The Category 5e 110-wiring base can be supplied
as a 50, 100 or 300 pair version, with or without
legs. It can also be supplied rack mounted as a
100, 200 or 300 pair version. Designation labels
are included with the bases.
50 Pair Wiring Base Kits
A typical kit for a 50 pair wiring base includes
a basic wiring base and 12 off 4 pair connector
blocks. A typical kit for a rack mounted 100 pair
wiring base includes 2 off 50 pair wiring base,
25 off 4 pair connector blocks and 5 off 5 pair
connector blocks.
Connector Block
The connector can be supplied as a 4 or 5 pair
version and is specifically designed to exceed
Category 5e performance. It has a robust design
and is colour coded for easy identification.
The connector is supplied in bags of 10.
PRODUCT CHARACTERISTICS
Conformance: Category 5e
Connector Block
Material: Flame retardent
thermoplastic rated
UL94V-0, off-white
Wiring Base
Material: Flame retardent
thermoplastic rated
UL94V-0, off-white
Contact Material: Copper Alloy, tin plated
Brand-Rex Copper Connectivity - GigaPlus Cross Connect Category 5e Cross Connect Wiring Bases and Connector
C AT E G O R Y 5 E S Y S T E M S
Product Part Numbering
Category 5e 110 wiring base 50 pair with legs GPC110WB50PL
Category 5e 110 wiring base 50 pair without legs GPC110WB50P
Category 5e 110 wiring base 50 pair with legs, Kit GPC110WB50PLK
Category 5e 110 wiring base 50 pair without legs, Kit GPC110WB50PK
Category 5e 110 wiring base 100 pair with legs GPC110WB100PL
Category 5e 110 wiring base 100 pair without legs GPC110WB100P
Category 5e 110 wiring base 100 pair with legs, Kit GPC110WB100PLK
Category 5e 110 wiring base 100 pair without legs, Kit GPC110WB100PK
Category 5e 110 wiring base 300 pair with legs GPC110WB300PL
Category 5e 110 wiring base 300 pair without legs GPC110WB300P
Category 5e 110 wiring base 300 pair with legs, Kit GPC110WB300PLK
Category 5e 110 wiring base 300 pair without legs, Kit GPC110WB300PK
Category 5e 110 wiring base 100 pair rack mounted, Kit GPC110WB100PRK
Category 5e 110 wiring base 200 pair rack mounted, Kit GPC110WB200PRK
Category 5e 110 wiring base 300 pair rack mounted, Kit GPC110WB300PRK
Category 5e 110 Connector Block – 4 Pair GPC110CB4P
Category 5e 110 Connector Block – 5 Pair GPC110CB5P
Vertical Cable Organiser for 110 Tower CMV110TWR
Vertical Cable Organiser Extension for 110 Tower CMV110TWRE
58
BRAND-REX VOICE SYSTEM
(CATEGORY 3 - CLASS C)
The Brand-Rex Voice System is a
comprehensive system of high quality Voice
products forming part of the Brand-Rex
range and is therefore backed by a 25 year
system warranty for total peace of mind
panels that give maximum configurable
connections at both front and rear
performance voice links
(30 pair, 50 pair & 100 pair) plus
10 pair disconnection strips
total installed voice solutions
C AT E G O R Y 3 S Y S T E M S
59
PRODUCT DESCRIPTION
Brand-Rex VOICE cables consist of 0.51mm
Polyolefin insulated conductors formed into
one or more units of twisted pairs. The units
are identified with coloured binders and are
assembled to form the cable core. The core
may be protected with one or more layers of
dielectric material and is covered by a protective
LSHF sheath.
PRODUCT CHARACTERISTICS
Core:
Conductor: Annealed copper,
0.51mm Diameter
Insulation: Polyolefin
Cabling Element: Twisted Pair
Colour Code: See Table 1 opposite
Final Assembly:
Core Stranding: 25 pair units
Unit Binders (see Table 2)
Binder: Wrapped with polyester
tape, 100% coverage
Sheath: LSHF compound
ELECTRICAL CHARACTERISTICS (@ 20°C)
NEXT (Max dB Power Sum in 25 pair units):
1 MHz 41 dB
4 MHz 32 dB
8 MHz 27 dB
10 MHz 26 dB
16 MHz 23 dB
Conformance: Category 3
Brand-Rex Copper Cables - VOICE
Sheath
Polyolefin Insulation
PET Tape
Annealed Copper Core
C AT E G O R Y 3 S Y S T E M S
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
White
White
White
White
White
Red
Red
Red
Red
Red
Black
Black
Black
Black
Black
Yellow
Yellow
Yellow
Yellow
Yellow
Violet
Violet
Violet
Violet
Violet
Blue
Orange
Green
Brown
Grey
Blue
Orange
Green
Brown
Grey
Blue
Orange
Green
Brown
Grey
Blue
Orange
Green
Brown
Grey
Blue
Orange
Green
Brown
Grey
Pair Number Colour - Conductor 1 Colour - Conductor 2
Table 1: Pair Colour Code
1
2
3
4
5
6
7
8
Blue-White
Orange-White
Green-White
Brown-White
Grey-White
Blue-Red
Orange-Red
Green-Red
1-25
26-50
51-75
76-100
101-125
126-150
151-175
176-200
Unit Number Binding Colour Pair Number (25 pair units)
Table 2: Unit Binder Colour Code
C3U25PRHF1
LSHF
9.50mm
Grey RAL 7035
IEC 60332-1
C3U50PRHF1
LSHF
13.0mm
Grey RAL 7035
IEC 60332-1
C3U100PRHF1
LSHF
18.0mm
Grey RAL 7035
IEC 60332-1
Part Number
Outer Sheath
Cable Weight
Outer Diameter (nom)
Sheath Colour
Fire Safety Rating
Part Number 25 Pair 50 Pair 100 Pair
Product Part Numbering
60
483
142
44
.1
PRODUCT DESCRIPTION
The 19" rack mounted patch panel is available
in 25 and 50 port versions, both have a slimline
1U footprint suitable for compact installations
maximising rack space. These panels are supplied
with cable ties, earth lead, cable manager,
mounting bolts and short form instructions.
The rear of the panel offers a choice of between
60 and 150 voice pairs to suit a variety of PBX
(Private Branch eXchange) systems and direct
line connections.
This offers maximum flexibility for connection
to both future and existing PBX installations.
PRODUCT CHARACTERISTICS
Panel Width: 19” (483mm)
Panel Height 1U (44.45mm)
Panel Depth: 142.0mm
Outlet Style: Unkeyed RJ45
Outlets: 4 pin or 6 pin
Colour: RAL 9005 Black
or RAL 7035 Grey
Punch Down Blocks: LSA style IDC
Conformance: Category 3
C5CPNLU254PKM
C5CPNLU254PKM
CPCPNLU256PKM
C5CPNLU504PKM
C5CPNLU504PKM
CPCPNLU506PKM
4 Pin - Black
4 Pin - Grey
6 Pin - Black
25 Port 50 Port
Product Part Numbering
Brand-Rex Copper Connectivity - VOICEUnshielded Panels
C AT E G O R Y 3 S Y S T E M S
61
Brand-Rex Copper Systems - VOICE Connectivity
PRODUCT DESCRIPTION
Brand-Rex VOICE includes a range of surface
mounted telecom boxes for multipair cable
termination, surface mounted outlets, 50 x 25mm
UK styled faceplate modules and line adaptor
fly leads.
Termination Boxes
The range of termination boxes is available
in a number of sizes to accommodate up to
10 x 10 pair disconnect termination modules.
Each box has been designed for easy access with
internal pair management and knockout cable
entry to provide a simple cost effective solution
for termination of incoming voice lines.
These units can be fitted before and after a PBX
(Private Branch eXchange) telephone system
providing for the removal or replacement of the
PBX unit with minimal disruption to incoming
and outgoing connections.
Telecom Outlet (LJU)
Available in PSTN, PBX or secondary units,
this product has a UK style telephone socket
and LSA style IDC cable termination.
Supplied as a standard UK style 68 x 68mm
faceplate, this outlet comes with a removable
21mm deep backbox, faceplate mounting
screws and installation instructions.
25 x 50mm Telecom Faceplate Module
As with our standard telecom outlet, this product
is also available in PSTN, PBX or secondary units,
with the same UK style telephone socket and LSA
style IDC cable termination. This unit has been
designed to mount in the Brand-Rex modular
range of faceplates.
Telecom Fly Lead Adaptor
PSTN, PBX or secondary units are available with
150 mm leads to convert an RJ-45 data outlet
into a standard UK style telephone outlet.
RANGE CHARACTERISTICS
Telephone Outlet: UK style 601 (6 pin)
with a right hand
latch position
Punchdown: LSA style IDC
C AT E G O R Y 3 S Y S T E M S
MMCWDBU03001
MMCWDBU05001
MMCWDBU10001
MMCDISU10PK001
MMCLBL10PU001
MMCLJUWMPSTN001
MMCLJUWMPABX001
MMCLJUWMSEC001
LJUPSTN001
LJUPBX001
LJUSEC001
LAUPSTNMSP001
LAUPBXM001
LAUSEC001
Wall Mount Dist Box - 3 Block (150 x 104 x 55)
Wall Mount Dist Box - 5 Block (129 x 160 x 90)
Wall Mount Dist Box - 10 Block (318 x 209 x 122)
Disconnection Block - 10 Pair
10 Pair Disconnect Block Label Holder
PSTN Master Single Outlet LJU Surface Mount
PBX Master Single Outlet LJU Surface Mount
Secondary Single Outlet LJU Surface Mount
PSTN 25 x 50mm LJU
PBX 25 x 50mm LJU
Secondary 25 x 50mm LJU
PSTN Fly Lead Adaptor
PBX Fly Lead Adaptor
Secondary Fly Lead Adaptor
White
Product Part Numbering
Not all parts are shown
62
BRAND-REX COPPER
SYSTEMS ACCESSORIES
cabling system accessories to complement
any Brand-Rex structured cabling system
C O P P E R A C C E S S O R I E S
63
CatAC6
Cat5e
Cat6
482.6
44.3
127.5
PRODUCT DESCRIPTION
The 48 Port 1U Snap-in-Jack Patch Panel is
ideally suited for data centre applications and
installations where rack space is at a premium.
The panel offers exceptional high density with
the ability to accommodate up to 48 jacks within
a 1U space on a 19” rack. Each panel is screened
with port identification strip and also panel
identification space to allow for easy port and
panel identification. The product has a detachable
front facia, allowing jacks to be removed from
the front of the cabinet, and is supplied with an
earthing point and a detachable cable manager.
Jacks are sold separately.
PRODUCT CHARACTERISTICS
Applications Equipment Racks & Cabinets
Installation: Suitable for approved
Brand-Rex Snap-in-Jacks
(see compatible System
Products below)
MECHANICAL SPECIFICATIONS
Dimensions: 483mm x 44.3mm (1U) x
127.5mm* (wxhxd)
*(With Manager Assembled)
Material Data: Panel and cable manager
manufactured from high
quality 1.5mm powder
coated steel, RAL9055 Black
with plastic fascia UL 94 V0
rated ABS
C O P P E R A C C E S S O R I E S
Brand-Rex Copper Connectivity - 48 Port 1U Patch Panel
Part Number
AC6JAKS000
C6CJAKS000
Description
10G Shielded Tool Free Jack
Category 6 Shielded Tool Free Jack
Quantity per Pack
12
12
Compatible System Products
Product Part Number
MMCPNLX48SIJ1U2
Description
48 Port 1U Snap in Jack Patch Panel
Product Part Numbering
64
CatAC6
Cat5e
Cat6
483
10
PRODUCT DESCRIPTION
The Brand-Rex 19" Modular Panel is a rack
mounted Snap-In-Jack panel that has been
designed with a double skin to provide flush
mounted jacks. The rear of the panel has been
plated for grounding to the chassis on shielded
systems. All outlets are numerically identified
with an additional writable surface for ease
of port naming.
PRODUCT CHARACTERISTICS
Applications: Equipment Racks & Cabinets
Installation: Suitable for both
shielded and unshielded
applications when used in
conjunction with Brand-Rex
approved Snap-In-Jacks.
It is recommended that
a minimum of one cable
manager is used per 1U of
modular panel
MECHANICAL SPECIFICATIONS
Dimensions: 24 port 1U 483mm x
44.3mm x 135mm*
(wxhxd) 48 port 3U
483mm x 33.2mm x 135mm
Colour: RAL 9005 Black or
RAL 7035 Grey
C O P P E R A C C E S S O R I E S
Brand-Rex Copper Connectivity - Snap-In-Jack Modular Panels
MMCPNLX24SIJ2
MMCPNLX24SIJ8
MMCPNLX48SIJ2
MMCPNLX48SIJ8
Note: Panels supplied empty, Snap-In-Jacks must be purchased separately.
Modular Snap In Jack Panel - Black
Modular Snap In Jack Panel - Grey
Modular Panel Cable Manager - Black
Modular Panel Cable Manager - Grey
24 Port 48 Port 3U
Product Part Numbering
MMCACCCMSIJ2
MMCACCCMSIJ8
65
6250MHz
AC6500MHz
5e100MHz
PRODUCT DESCRIPTION
The Brand-Rex Angled Snap-in-Jack Patch
Panel is a 1U 24 Port Panel that facilitates
cord routing directly into the rack vertical side
management thus rendering horizontal cable
managers redundant. The resultant increased
rack density not only saves valuable space but
also offers a panel that eases bending stresses
on the cord while maximising performance.
The design accommodates a separate rear
cable manager to provide a strain relief feature
for the simple routing of horizontal cabling
and also allows for colour coded labelling.
PRODUCT CHARACTERISTICS
Applications: Equipment racks
Cabinets
Installation: Suitable for approved
Brand–Rex Snap-in-jacks
(See compatible System
Products below)
MECHANICAL SPECIFICATIONS
[*With Manager assembled]
Material Data: Panel and cable manager
manufactured from
high quality 1.5mm
powder coated steel
RAL 9005 Black
Brand-Rex Copper Connectivity - Snap-In-Jack Angled Panel
Part Number
AC6JAKS000
AC6JAKU002
C6CJAKU002
C6CJAKS000
GPCJAKU002
GPCJAKU013LF
Description
Augmented Category 6 Shielded Jack
Augmented Category 6 Unshielded Jack (Tool-free)
Category 6 Unshielded Jack (Tool-free)
Category 6 Shielded Jack
Category 5 Unshielded Jack (Tool-free)
Category 5 Unshielded Jack
Colour
-
Black
Black
-
Black
White
Quantity per Pack
12
12
12
12
12
50
Compatible System Products
Product Part Number
MMCPNLX24SIJ2MAN
Description
C O P P E R A C C E S S O R I E S
Product Part Numbering
66
CatAC6
Cat5e
Cat6
PRODUCT DESCRIPTION
The 19” inline Snap-in-Jack Patch Panel
accommodates 24 ports within a 1U
configuration and is compatible with all
standard 19” racks and cabinets. All outlets
are numerically identified with an additional
writable surface allowing for ease of port
naming. In addition to this, each panel has
strain relief feature built into the rear.
Each panel is supplied with cable ties,
panel mounting accessories and short
form installation instructions.
PRODUCT CHARACTERISTICS
Applications: Equipment Racks & Cabinets
Installation: Suitable for approved Brand-Rex
Snap-in-jacks
(See compatible System
Products below)
MECHANICAL SPECIFICATIONS
Dimensions: 24 port 1U 483mm x 44.5mm
x 124mm (WxHxD)
Colour: RAL9005 Black or RAL 7035 Grey
Brand-Rex Copper Connectivity - 24 Port Inline Snap-in-Jack Panels
Part Number
AC6JAKS000
AC6JAKU002
C6CJAKU002
C6CJAKS000
GPCJAKU002
GPCJAKU013LF
Description
Augmented Category 6 Shielded Jack (Tool-free)
Augmented Category 6 Unshielded Jack (Tool-free)
Category 6 Unshielded Jack (Tool-free)
Category 6 Shielded Jack (Tool-free)
Category 5 Unshielded Jack (Tool-free)
Category 5 Unshielded Jack (Lead Frame)
Colour
-
Black
Black
-
Black
White
Quantity per Pack
12
12
12
12
12
50
Compatible System Products
Product Part Number
MMCPNLX24SIJ2MIL
MMCPNLX24SIJ8MIL
Description
24 Port Inline Snap-in-Jack Panel
24 Port Inline Snap-in-Jack Panel
Colour
Black
Grey
C O P P E R A C C E S S O R I E S
Product Part Numbering
67
CatAC6
Cat5e
Cat6
Coloured Insert Snap-in-Jack Panel – Black
Coloured Insert Snap-in-Jack Panel – Grey
Insert with Dust Cover - Red
Insert with Dust Cover - Black
Insert with Dust Cover - White
Insert with Dust Cover - Blue
Insert with Dust Cover - Green
Insert with Dust Cover - Yellow
Snap-in-Jack Blank
Snap-in-Jack Blank
Retraction Tool
MMCPNLX24SIJ2DCI
MMCPNLX24SIJ8DCI
MMCACCINSDC1
MMCACCINSDC2
MMCACCINSDC3
MMCACCINSDC4
MMCACCINSDC5
MMCACCINSDC6
MMCJAKBLK2
MMCJAKBLK3
MMCIRT001
Black
Grey
Red
Black
White
Blue
Green
Yellow
Black
White
Red
1
1
80
80
80
80
80
80
20
20
1
Part NumberDescription ColourQty
per pack
10GPlus Shielded Keystone Snap-in-Jack (Tool-free)
10GPlus Unshielded Jack (Tool-free)
Cat6Plus Unshielded Jack (Tool-free)
Cat6Plus Shielded Keystone Jack (Tool-Free)
GigaPlus Unshielded Jack (Tool-free)
GigaPlus Unshielded Jack (Lead Frame)
AC6JAKS000
AC6JAKU002
C6CJAKU002
C6CJAKS000
GPCJAKU002
GPCJAKU013LF
-
Black
Black
-
Black
White
12
12
12
12
12
50
Part NumberDescription Colour Qtyper pack
PRODUCT DESCRIPTION
The Brand-Rex 19” Snap-in-Jack Patch Panel
that accommodates 24 ports within a 1U
configuration and provides coloured inserts
The product is designed and supplied with
a detachable rear cable manager and comes
complete with black inserts with integrated
dust cover already loaded into the panel
as standard. Optional coloured inserts are
available for purchase separately in a variety
identification.
PRODUCT CHARACTERISTICS
Packaging: Panel and cable manager
packaged together in cardboard
box, panel populated with black
inserts qty 24, all other coloured
insert requirements packaged
separately in bags containing 8
of each colour, minimum order
quantity 10 bags.
Installation: Suitable for approved Brand-Rex
Snap-in-Jacks (see compatible
System Products below)
MECHANICAL SPECIFICATIONS
Dimensions: 483mm x 44.3mm (1U) x
127.5mm* (WxHxD)
*[With Manager Assembled]
Material Data: Panel and cable manager
manufactured from high quality
1.5mm powder coated steel,
RAL 9055 Black with plastic
fascia UL 94 V0 rated ABS
Brand-Rex Copper Connectivity - 24 Port Coloured Insert Snap-in-Jack Panels
C O P P E R A C C E S S O R I E S
Compatible System Products
Product Part Numbering
68
483
483
44
.1
CatAC6
Cat5e
Cat6
Cat7
Brand-Rex Copper Connectivity - Blank PanelsPRODUCT DESCRIPTION
1U and 2U blank panels are used to complete
any installation in a cabinet. Designed to
complement the Brand-Rex range of patch panels,
they provide a more aesthetically pleasing finish
and offer improved user safety.
MECHANICAL SPECIFICATION
1U Rack Mounted
Panel Width: 19" (483mm)
Panel Height: 1U (44.1mm)
Panel Depth: 12.50mm
Colour: RAL 9005 Black
or RAL 7035 Grey
Material: 1.5mm Mild Steel
2U Rack Mounted
Panel Width: 19" (483mm)
Panel Height: 2U (88.5mm)
Panel Depth: 12.50mm
Colour: RAL 9005 Black
or RAL 7035 Grey
Material: 1.5mm Mild Steel
C O P P E R A C C E S S O R I E S
MMCACCCM004
MMCACCCM005
MMCACCCM104
MMCACCCM105
1U Rack Mounted Blank Panel
2U Rack Mounted Blank Panel
Black Grey
Product Part Numbering
69
483
88
.5
483
483
44
.1
CatAC6
Cat5e
Cat6
Cat7
PRODUCT DESCRIPTION
To ensure neat and tidy installations, a range
of cable management products is available.
These products are either 19" rack mounted
or side mounted.
PRODUCT CHARACTERISTICS
1U 5 Ring Rack Mounted
Panel Width: 19” (483mm)
Panel Height: 1U (44.45mm)
Panel Depth: 65.2mm
Ring Dimensions: 60mm x 40mm x 13mm
Colour: RAL 9005 Black
or RAL 7035 Grey
Material: 1.5mm Mild Steel
1U Rack Mounted with brush
Panel Width: 19” (483mm)
Panel Height: 1U (44.1mm)
Panel Depth: 50mm
Colour: RAL 9005 Black
Material: 1.5mm Mild Steel
Side Mounted Vertical
Ring Dimensions (V): 44mm x 23mm x 50mm
Colour: RAL 9005 Black
or RAL 7035 Grey
Material: 2.5mm Mild Steel
MMCACCCM002
MMCACCCM006
MMCACCCM001
-
MMCACCCM106
MMCACCCM1011U Rack Mounted - 5 ring
1U Rack Mounted with brush
Side Mounted - Vertical
Black Grey
Product Part Numbering
Brand-Rex Copper Connectivity - Cable Management Accessories
C O P P E R A C C E S S O R I E S
70
8686
86
14.4
25
CatAC6
Cat5e
Cat6
Cat7
PRODUCT DESCRIPTION
Brand-Rex supplies a comprehensive range of
plastic accessories to provide an outlet solution
for wall, trunking and floorbox applications.
These accessories have been designed to be used
in conjunction with Brand-Rex Snap-In Jacks.
All UK style faceplates are supplied with M3.5
mounting screws and are available in both
modular or low cost shuttered versions.
Backboxes can also be supplied to allow for
retrofit application where outlets are required
to be surface mounted.
Floorbox modules and blanks have been
designed to clip into a 1.0 - 2.0mm thick plate
with a standard 22 x 37mm floorbox cut-out.
PRODUCT CHARACTERISTICS
Material: ABS
Colour: White
Faceplate Type: Single or
Double Gang
Modular Range: 1 - 4 outlets
Shuttered Range: 1 or 2 outlets
MMCWDOUNI062
MMCANG0623
MMCWDO06C001
MMCANG06C3
MMCWDOUNI042
MMCBLK06C3
MMCWDOUNI040
MMCWDOUNI052
MMCWDOUNI070
MMCWDOUNI071
MMCWDOUNI030
MMCWDOUNI031
MMCSGBB32001
MMCSGBB44001
MMCDGBB32002
MMCDGBB44002
25 x 50mm Shuttered Faceplate Module
25 x 50mm Angled Faceplate Module
25 x 38mm Shuttered Floorbox Module
25 x 38mm Angled Floorbox Shuttered Module
25 x 50mm Faceplate Blank
25 x 38mm Floorbox Blank
50 x 50mm Faceplate Blank
12.5 x 50mm Faceplate Blank
86 x 86mm Single Port Shuttered Faceplate
86 x 86mm Double Port Shuttered Faceplate
86 x 86mm Single Gang Modular Faceplate
86 x 147mm Double Gang Modular Faceplate
32mm Deep, Single Gang Backbox
44mm Deep, Single Gang Backbox
32mm Deep, Double Gang Backbox
44mm Deep, Double Gang Backbox
White
Product Part Numbering
Brand-Rex Copper Connectivity - UK Styled Plastic Outlets and Accessories
C O P P E R A C C E S S O R I E S
71
6250MHz
AC6500MHz
5e100MHz
14.8
PRODUCT DESCRIPTION
Brand-Rex single and double Snap-In Jack
Modules have been designed to accept the
standard Brand-Rex Snap-In Jacks and are fully
compatible with the 'Legrand Mosaic' and
our continental UNI style faceplates.
PRODUCT CHARACTERISTICS
Dimensions: 45mm x 45mm
Depth: 14.75mm
Label: White paper with
clip in clear cover
Body Material: ABS
Colour: Off White
PRODUCT DESCRIPTION
The Brand-Rex Dual angled Snap-In-Jack
module has been designed to accept two
standard Snap-In-Jacks and is fully compatible
with the standard 45 x 45mm aperture and
our continental UNI style faceplates.
PRODUCT CHARACTERISTICS
Dimensions: 45 x 45mm
Label: White paper with
clip in clear cover
Body Material: ABS
Colour: Artic White
Brand-Rex Copper Connectivity - Snap-In-Jack Modules and Dual Angled Snap-In-Jack Modules
C O P P E R A C C E S S O R I E S
Part Number
MMCUNILGS45001
MMCUNILGD45001
MMCANGLGD45001
MMCANGLGS45002
MMCANGLGD45002
MMCANGDK2453
Description
1 Way Snap-In Jack Module
2 Way Snap-In Jack Module
Dual 45 x 45mm Angled Snap-in-Jack module
Angled Snap-In-Jack Module 45 x 45mm Single Port
Angled Snap-In-Jack Module 45 x 45mm Double Port
Keystone Snap-in-Jack Faceplate Module
Product Part Numbering
72
6250MHz
AC6500MHz
5e100MHz
C O P P E R A C C E S S O R I E S
PRODUCT DESCRIPTION
The Brand-Rex DIN Rail Snap-in-Jack Module
offers a connection point in the cabling
subsystem and is suitable for deployment in
residential, industrial and enterprise structured
cabling systems. The module is designed to
be easily snapped onto a DIN rail and it offers
unrivalled usability and accessibility. Multiple
modules can be aligned horizontally in a row and
the angled direction of the jacks facilitates cord
routing in a way that eases bending stresses while
maximising performance.
Snap-in-Jacks. See compatibility chart below
for details
PRODUCT CHARACTERISTICS
Dimensions: 69mm x 26mm x
67mm (D x W x H)
Label: White paper with
clip in clear cover
Body Material: Polycarbonate
Colour: Light Grey
RAL 7035
Description Part Number Colour Quantity per Pack
10GPlus Shielded Snap-in-Jack – Tool-Free
10GPlus Unshielded Jack – Tool-Free
Cat6Plus Shielded Snap-in-Jack – Tool-Free
Cat6Plus Unshielded Snap-in-Jack – Tool-Free
GigaPlus Unshielded Snap-in-Jack – Tool-Free
GigaPlus Unshielded Snap-in-Jack (Lead Frame)
AC6JAKS000
AC6JAKU002
C6CJAKS000
C6CJAKU002
GPCJAKU002
GPCJAKU013LF
-
Black
-
Black
Black
White
12
12
12
12
12
50
Compatible System Products
Brand-Rex Copper ConnectivitySingle Port DIN Rail Snap-in-Jack Module
Product Part Numbering
Description Pack Size Part Number
Single Port DIN Rail Snap-in-Jack Module 4 MMCDINSIJS8
73
Cat5e
Cat6
PRODUCT DESCRIPTION
Within the standard Brand-Rex product range
is a set of standard tools for the safe and efficient
termination of copper cables. These tools are
available for both LSA and 110 style
IDC connectors.
Also available is a Brand-Rex Jack Gripper to hold
Snap-In-Jacks during termination and the range
of snap-in-jack blanks.
PRODUCT DESCRIPTION
The cable management range complements
the set of Cross-Connect components offered
by Brand-Rex. The horizontal cable organisers
can be supplied with or without legs and also
as a 19” rack mounted version.
PRODUCT CHARACTERISTICS
Dimensions
Horizontal Cable Organiser with Legs
271.8 x 46.7 x 111.0mm
Horizontal Cable Organiser without Legs
214.9 x 44.0 x 64.0mm
Horizontal Cable Organiser rack mounted
482.6 x 44.0 x 75.2mm
Organiser Material
Flame retardant thermoplastic rated
UL94V-0, off-white
Cross-Connect Cable Management & Accessories
C O P P E R A C C E S S O R I E S
Product Part Numbering
Horizontal Cable Organiser with Legs
Horizontal Cable Organiser without Legs
Horizontal Cable Organiser Rack Mounted
Vertical Cable Organiser for 110 Tower
Vertical Cable Organiser Extension for 110 Tower
IDC Punchdown Tool Handle (blades sold separately)
Punchdown Tool Blade - 110
Punchdown Tool Blade - LSA
Jack Gripper
Snap-in-Jack Blank
Snap-in-Jack Blank
CMH110L
CMH110
CMH110R
CMV110TWR
CMV110TWRE
MMCD914
MMCACC110
MMCACCLSA
MMCJH002
MMCJAKBLK2
MMCJAKBLK3
-
-
-
-
-
-
-
-
-
Black
White
Part NumberDescription Colour
75
Brand-Rex is committed to a future in optical cabling
and truly believes in the benefits of optical cables for the
future requirement of both LAN and WAN networks. Why?
Here are some of the benefits of Brand-Rex Optical Systems.
Transmission Security – As optical fibre emits no
electromagnetic energy there is no opportunity
to intercept transmissions remotely.
Bandwidth – Optical fibre has a much greater data
capacity than copper, carrying more data further.
Transmission Distance – Optical systems
have much lower attenuation than copper systems
meaning that signals can be transmitted further.
No Risk of EMI or RFI – Fibre optic cables being
primarily glass have no risk of electromagnetic
or radio frequency interference.
Why Brand-Rex
Brand-Rex offers a complete panel to panel solution,
utilising all standard connectors and cable formats to
deliver a high quality reliable optical solution for your
LAN. The Brand-Rex solution includes a full range of low
fire hazard, halogen free and high performance tight
buffered and loose tube cables, a comprehensive range of
connectors, adaptors, pigtails and patch cords. The range
also includes all the features that you would expect from a
Brand-Rex system component. The complete LAN solution
is covered by the 25 year Brand-Rex channel warranty only
available from authorised Brand-Rex installation partners.
O P T I C A L S Y S T E M S
76
CABLE SELECTION:
When selecting the correct cable for any
installation the first question will be of
fibre type. This is dependent upon the
transmission distance and the protocol
being adopted. Further on in this section
is a key to transmission distances on the
main fibre types for 1Gb and 10 Gb Ethernet
applications. This key is repeated on each
page as a reference.
With the choice of fibre type complete,
the selection of cable construction must
be made. There are several key questions
that must be answered in determining
cable selection.
Fibre Count -
How many fibres are required?
This should take into account future
demand and allow an element of
redundancy. The cost of installation
and associated down time will generally
outweigh the cost of additional fibre
on day one.
Additionally, good practice should be taken
into consideration. A large high fibre count
cable carrying the majority of a company's
data generates a larger risk than several
lower fibre count cables should any cable
damage occur. Diversity in routing should
also be considered in answering
this question.
Cable Properties –
What type of cable is required?
The prime function of the cable is to provide
a safe path for the fibre during and post
installation. There are a wide variety of cable
types to choose from depending on how
and where the cable is to be installed.
A summary of the main construction variants
and their intended usage is given below.
Sheath Options:
Universal Cables
These cables are designed for use both
internally and externally. They have a Low
Smoke Halogen Free (LSHF) compound
sheath that reduces the emission of toxic
fumes and reduces the spread of fire.
Outdoor Cables
These cables are designed only for external
use. They have a Low Density Polyethylene
sheath that makes the cable lighter than the
equivalent LSHF version. This combined with
reduced weight makes Outdoor Cables more
suited to the longer pulled runs into which
they are generally installed. Outdoor Cables
may enter buildings, however they must
not pass more than 3m into the building
dependant on local regulations.
Cable Options:
Premise Distribution (PDC) Cables
These cables are based on a 900 μm tight
buffered element and are generally installed
in the backbone of a building network and
direct terminated at a consolidation point.
Brand-Rex PDC cables are manufactured in
our state of the art UK based factory and
consist of up to 24 individual tight buffered
elements and distributed strength members.
The product is then sheathed with a LSFH
compound making it suitable for internal
and external applications.
Breakout and Patch Cables
To produce the building block for breakout
cables, a 900 μm tight buffered element is
sheathed with an additional layer of LSHF
compound over a layer of aramid yarns.
This forms a simplex sub unit that can be
used in the production of optical patch
cords or used for fibre to the desk (FTTD)
applications; additionally it forms the base
unit for the breakout cables.
Brand-Rex breakout cables are generally
installed within equipment rooms as rack to
rack links and are manufactured in our state
of the art UK based factory. They consist of
up to 24 simplex sub units with additional
strength members and an outer LSHF
universal sheath.
Loose Tube Cables
Loose tube cables provide for higher fibre
counts than are commonly available in tight
buffer element based products such as PDC
and breakout cables. They can generally be
installed as building or campus links and
are available in a variety of constructions
offering different mechanical performance.
The building block of a loose tube cable
is a PBT tube that contains up to 24
individually coloured optical fibres
suspended in a gel material to provide
protection and prevent water ingress.
These gel filled loose tubes are used to
produce either Unitube or Multi Loose
Tube cables.
Brand-Rex loose tube cables are
manufactured in our UK based optical facility
and are available in 4 standard variants;
1. Duct Grade
2. Rodent Resistant Glass Armoured
3. Direct Burial Grade – Single Sheath
4. Direct Burial Grade – Twin Sheath
All 4 variants are available as either Unitube
or Multi Loose tube cable. Unitube products
are available with up to 24 fibres and Multi
Loose Tube products are available with up
to 216 fibres as standard, although higher
fibre counts are available on request.
The Unitube products take a single gel filled
loose tube and apply the relevant armouring
and then either a Universal LSHF sheath or
a Polyethylene outdoor sheath. The Multi
Loose Tube products take up to 18 gel filled
loose tubes and SZ strand them around
a glass central strength member before
adding the relevant armouring and either
a Universal LSHF sheath or a Polyethylene
outdoor sheath.
O P T I C A L F I B R E R A N G E
77
O62 050 OM3 OM4 BM3 BM4 008 108 208
C A B L E D O P T I C A L F I B R E S P E C I F I C AT I O N S
The tables below describe the standard fibres supplied by Brand-Rex that comply with or exceed ISO/IEC 11801 and EN50173-1 and EN50173-2
requirements, for use in high speed LAN, MAN, WAN data and telecom networks. Specific Fibre Types to customer specification are available on request.
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
Part Number Identifier
IEC 60793-2 Category
ITU-T Recommendation
ISO / IEC 11801 Category
Cabled Optical Performance of Fibre
Attenuation @ 850 / 1300nm (dB/km)
Bandwidth @ 850 / 1300nm (MHz.km)
Attenuation @ 1310 / 1550nm (dB/km)
Dispersion @ 1310 / 1550nm (ps/nm.km)
Numerical Aperture
Refractive Index @ 850 / 1300 nm
Refractive Index @ 1310 / 1550nm
Geometrical Data
Core Diameter (μm)
Mode Field Diameter (μm)
Core / Cladding Concentricity Error (μm)
Overall Coating Diameter (μm)
Coating Concentricity Error (μm)
Mechanical Data
Proof Test Level
Macrobend (radius(mm) /turns/loss dB @ 1625nm)
Part Number Identifier
IEC 60793-2 Category
ITU-T Recommendation
ISO / IEC 11801 Category
Cabled Optical Performance of Fibre
Attenuation @ 850 / 1300nm (dB/km)
Bandwidth @ 850 / 1300nm (MHz.km)
EMBc (calculated Effective Modal Bandwidth) @ 850nm (MHz.km)
Numerical Aperture
Refractive Index @ 850nm
Refractive Index @ 1300nm
Geometrical Data
Core Diameter (μm)
Core / Cladding Concentricity Error (μm)
Overall Coating Diameter (μm)
Coating Concentricity Error (μm)
Mechanical Data
Proof Test Level
Macrobend (radius(mm) /turns/loss dB @ 850nm/1300nm)
062
10-A1b
n/a
OM1
≤ 3.2 / ≤ 0.8
≥ 200 / ≥ 500
n/a
n/a
0.275 +/- 0.015
1.496/1.491
n/a
62.5 +/-2
n/a
≤ 1
245 +/-10
≤ 12.5
≥ 1%
≥ 100kpsi
n/a
050
10-A1a.1
G.651.1
OM2
≤ 2.8 / ≤ 0.8
≥ 500 / ≥ 800
n/a
n/a
0.200 +/- 0.015
1.482/1.477
n/a
50 +/-2
n/a
≤ 1
245 +/-10
≤ 12.5
≥ 1%
≥ 100kpsi
n/a
OM3
10-A1a.2
G.651.1
OM3
≤ 2.8 / ≤ 0.8
≥ 1500 / ≥ 500
≥ 2000
0.200 +/- 0.015
1.482
1.477
50 +/-2
≤ 1
245 +/-10
≤ 12.5
≥ 1%
≥ 100kpsi
37.5/100/0.5/0.5
008
50-B1.3
G.652D
OS1/OS2
n/a
n/a
≤ 0.38 / ≤ 0.25
≤ 3.5 / ≤ 18
n/a
n/a
1.467/1.468
n/a
9.0
≤ 0.6
245 +/-10
≤ 12.5
≥ 1%
≥ 100kpsi
25/100/0.05
OM4
10-A1a.3
G.651.1
OM4
≤ 2.8 / ≤ 0.8
≥ 3500 / ≥ 500
≥ 4700
0.200 +/- 0.015
1.482
1.477
50 +/-2
≤ 1
245 +/-10
≤ 12.5
≥ 1%
≥ 100kpsi
37.5/100/0.5/0.5
108
50-B6_a
G.657.A1
OS1/OS2
n/a
n/a
≤ 0.38 / ≤ 0.25
≤ 3.5 / ≤ 18
n/a
n/a
1.467/1.468
n/a
9.0
≤ 0.5
245 +/-10
≤ 12.5
≥ 1%
≥ 100kpsi
15/10/0.25/1.0
10/1/0.75/1.5
BM3
10-A1a.2
G.651.1
OM3
≤ 2.8 / ≤ 0.8
≥ 1500 / ≥ 500
≥ 2000
0.200 +/- 0.015
1.482
1.477
50 +/-2
≤ 1
245 +/-10
≤ 12.5
≥ 1%
≥ 100kpsi
15/2/0.1/0.3
7.5/2/0.2/0.5
208
50-B6_a
G.657.A2
OS1/OS2
n/a
n/a
≤ 0.38 / ≤ 0.25
≤ 3.7 / ≤ 18.5
n/a
n/a
1.467/1.467
n/a
8.8
≤ 0.5
245 +/-10
≤ 12.5
≥ 1%
≥ 100kpsi
15/10/0.03
10/1/0.1/0.2
7.5/1/0.5/1.0
BM4
10-A1a.3
G.651.1
OM4
≤ 2.8 / ≤ 0.8
≥ 3500 / ≥ 500
≥ 4700
0.200 +/- 0.015
1.482
1.477
50 +/-2
≤ 1
245 +/-10
≤ 12.5
≥ 1%
≥ 100kpsi
15/2/0.1/0.3
7.5/2/0.2/0.5
78
STANDARD TIGHT BUFFERED
FIBRE COLOURS:
1. Blue
2. Orange
3. Green
4. Brown
5. Grey
6. White
7. Red
8. Black
9. Yellow
10. Violet
11. Pink
12. Turquoise
13. Blue/Black
14. Orange/Black
15. Green/Black
16. Brown/Black
17. Grey/Black
18. White/Black
19. Red/Black
20. Tan/Black
21. Yellow/Black
22. Violet/Black
23. Pink/Black
24. Turquoise/Black
To serve the requirements of optical systems
customers, Brand-Rex has created a standard
range of Tight Buffered and Loose Tube
cables that will meet most requirements.
The standard specification of these cables
is described in detail on this page.
As a company that is driven by our
customers needs, Brand-Rex will always
be happy to offer non-standard products
to order based on your own specification.
This includes complex requirements ranging
from fire survival constructions to simple
requirements such as composite cables,
custom sheath colours or printing.
Please enquire about our custom
cable service.
STANDARD SHEATH
MARKINGS OPTICAL CABLES:
KEY:
Sequential length marking
Fibre Type
Cable Type
Fibre Count
Construction
Week of Manufacture
Year of Manufacture
STANDARD SHEATH COLOUR -
LOOSE TUBE AND DISTRIBUTION CABLE:
LSHF Black
Polyethylene Black
Other colours available on request subject
to minimum order quantity.
STANDARD SHEATH COLOUR -
BREAKOUT and PATCH CABLE:
Multi Mode Orange
Single Mode Yellow
Note:
and outer sheath follow this format.
on sub units on BKT cables.
STANDARD BUFFER COLOUR -
BREAKOUT and PATCH CABLE:
62.5/125 Blue
50/125 Green
OM3 Grey
OM4 Red
OS1/OS2 Yellow
O P T I C A L C A B L E M A N U FA C T U R I N G S TA N D A R D S
FibrePlus Standard
Cable Range
STANDARD FIBRE COLOURS:
1. Blue
2. Orange
3. Green
4. Brown
5. Grey
6. White
7. Red
8. Black
9. Yellow
10. Violet
11. Pink
12. Turquoise
STANDARD MULTI LOOSE TUBE
IDENTIFICATION:
1. Red
2. Green
3. Natural
4. Natural
5. Natural
6. Natural
7. Natural
8. Natural
9. Natural
10. Natural
11. Natural
12. Natural
13. Natural
14. Natural
15. Natural
16. Natural
17. Natural
18. Natural
Note: Where fillers are present in a loose
tube design, these will be used as
markers and coloured accordingly.
The colour sequence repeats for the
second layer.
79
050
600600
OM4
900 550
062
300600
050
600600
OM3
900 550
00810,000
40,000
OM4
062
25300
050
83300
OM3
300 300
00810,000
40,000
550 300
Central
Computer
Room
Optical Patch Panel
Building Riser
Wall/Floor
Outlet
Terminal
Transmission Distance Identification
Fibre Type - 050
Brand-Rex standard identification characters
for fibre type used in part numbering.
Second Window - Transmission distance in metres
Standard Multi Mode 1300nm (LX)
High Grade Multi Mode 1300nm (LX4)
Single Mode 1550nm (ER)
First Window - Transmission distance in metres
Standard Multi Mode 850nm (SX)
High Grade Multi Mode 850nm (SX/SR)
Single Mode 1310nm (LR)
Standard grade
Multi Mode
OM1 62.5/125 fibre
Standard grade
Multi Mode
OM1 & OM2 50/125 fibre
Standard grade
Multi Mode
OM3 50/125 fibre
High grade
Multi Mode
OM4 50/125 fibre
Low Water Peak
Single Mode
OS1/OS2 fibre
The FibrePlus product range can be used for
conventional structured cabling systems installations
and for centralised optical fibre installations.
FibrePlus supports the cabling schemes as described
in ISO/IEC 11801 and TIA/EIA 568C.
Link transmission distances are either attenuation
limited or bandwidth limited. In attenuation limited
installations the individual loss of each component
is summed for all the parts in the link and the sum
must fall within the loss limit for the fibre type.
In bandwidth limited applications the overall reach is
given as a maximum distance supportable.
Optical Performance
The optical performance of the cable required by the
current published and new draft standards is shown in
the table below.
10 Gigabit EthernetGigabit Ethernet
Fibre Type
3.5
3.5
3.5
3.5
1.5
1.5
1.5
1.5
Maximum Attentuation(dB/km) 850nm
Maximum Attentuation(dB/km) 1300nm
062
050
OM3
OM4
Fibre Type
OS1
OS2
1.0
0.4
1.0
0.4
Maximum Attentuation(dB/km) 1310nm
Maximum Attentuation(dB/km) 1550nm
F I B R E P L U S L I N K A N D C H A N N E L T R A N S M I S S I O N D I S TA N C E S
80
C A B L E P R O P E R T I E S A N D I N S TA L L AT I O N
Cable Properties
Water BlockedThe cable has been tested for water penetration in accordance with IEC 60794-1-F5 and has less than 3m penetration in a 24hr period under a 1m head of water.
Flame RetardantThe cable is sheathed in a Low Smoke Halogen Free material and offers IEC 60332-1 performance.
Non MetallicThe cable is free from metallic elements.
Suitable Installation
Internal InstallationA cable designed for installation in trunking and floor / roof voids.
Duct GradeDuct Grade Cable that can be installed into buried duct / sub duct by pulling, winching or blowing.
Direct Buried A direct burial grade of cable, which has excellent crush resistance and is designed for direct burial installation.
Rodent ResistantThe cable has armouring which offers a degree of resistance to attack from rodents.
Type of Cable
ExternalUniversalSuitable for both internal and external use.
InternalSuitable for internal use. Suitable for external use.
Fire SurvivalThis cable is sheathed in a LSHF material and offers IEC 60331-25 performance
81
Tight Buffered
Type:
Design Family:
Part Number Format:
High Performance
Type:
Design Family:
Part Number Format:
Single Loose Tube (UniTube)
Type:
Design Family:
Part Number Format:
Multi Loose Tube (6 x 4 ftp)
Type:
Design Family:
Part Number Format:
Multi Loose Tube (6 x 12 ftp)
Type:
Design Family:
Part Number Format:
Multi Loose Tube (8 x 12 ftp)
Type:
Design Family:
Part Number Format:
Multi Loose Tube (12 x 12 ftp)
Type:
Design Family:
Part Number Format:
Multi Loose Tube (18 x 12 ftp)
Type:
Design Family:
Part Number Format:
Distribution
PDC
HFfffPDCxxLU
Fire Survival
UFS
EFfffUNIxxLSTALUFSRD
Duct Grade
UDU/UDE
HFfffUNIxxLU/NM
Duct Grade
MDU 01/MDE 01
HFfffSxxWLU/NM 4FT
Duct Grade
MDU 02/MDE 02
HFfffSxxWLU/NM
Duct Grade
MDU 04/MDE 04
HFfffSxxWLU/NM
Duct Grade
MDU 03/MDE 03
HFfffSxxWLU/NM
Duct Grade
MDU 05/MDE 05
HFfffSxxWLU/NM
Single Fibre Cable
SFC
HFfffSFCxxL
Glass Yarn Armoured
URU/URE
HFfffUNIxxRRLU/NM
Glass Yarn Armoured
MRU 01/MRE 01
HFfffSxxWRRLU/NM 4FT
Glass Yarn Armoured
MRU 02/MRE 02
HFfffSxxWRRLU/NM
Glass Yarn Armoured
MRU 04/MRE 04
HFfffSxxWRRLU/NM
Glass Yarn Armoured
MRU 03/MRE 03
HFfffSxxWRRLU/NM
Glass Yarn Armoured
MRU 05/MRE 05
HFfffSxxWRRLU/NM
Zip Cord
ZIP
HFfffZIPxxL
-
-
-
Direct Burial
USU/USE
HFfffUNIxxSTALU/NM
Direct Burial
MSU 01/MSE 01
HFfffSxxWSTALU/NM 4FT
Direct Burial
MSU 02/MSE 02
HFfffSxxWSTALU/NM
Direct Burial
MSU 04/MSE 04
HFfffSxxWSTALU/NM
Direct Burial
MSU 03/MSE 03
HFfffSxxWSTALU/NM
Direct Burial
MSU 05/MSE 05
HFfffSxxWSTALU/NM
Duplex Breakout
DUP
HFfffDUPxxL
-
-
-
Direct Burial
UTU/UTE
HFfffUNIxxLSTALU/NMSTANM
Direct Burial
MTU 01/MTE 01
HFfffSxxWLSTALU/NMSTANM 4FT
Direct Burial
MTU 02/MTE 02
HFfffSxxWLSTALU/NMSTANM
Direct Burial
MTU 04/MTE 04
HFfffSxxLSTALU/NMSTANM
Direct Burial
MTU 03/MTE 03
HFfffSxxWLSTALU/NMSTANM
Direct Burial
MTU 05/MTE 05
HFfffSxxWLSTALU/NMSTANM
T R A N S M I S S I O N D I S TA N C E B Y A P P L I C AT I O N
Cable Range
82
Fibre Optic Link and Channel transmission distances
Brand-Rex Cabling Systems include two separate optical cable
product ranges: MicroBlo/Blolite and FibrePlus. Each set can be used
for conventional structured cabling systems installations and
for Centralised Optical Fibre installations.
Brand-Rex optical cable systems support the cabling schemes as
described in ISO/IEC 11801 and TIA/EIA 568C and EN 50173.
Link transmission distances are either attenuation limited
or bandwidth limited. In attenuation limited installations the
individual loss of each component is summed for all the parts
in the link and the sum must fall within the loss limit for the
fibre type.
The table above provides a summary of the drive distances possible
on optical fibre links per applications protocol assuming that the link
falls within the attenuation budget of the technology.
-
-
-
5,000
-
10,000
10,000
22,250
-
10,000
-
10,000
40,000
-
10,000
-
30,000
-
10,000
-
10,000
-
10,000
-
10,000
-
10,000
-
10,000
-
12,500
-
12,500
-
-
-
2,560
-
4,200
4,200
8,900
-
4,700
-
6,300
16,000
-
2,000
-
2,000
-
2,000
-
5,800
-
5,800
-
2,400
-
4,400
-
4,400
-
2,000
-
2,000
1,514
2,000
550
550
300
300
-
-
150
-
150
-
-
2,000
2,000
1,000
-
500
-
500
-
300
-
420
-
190
-
125
-
1,000
2,000
300
330
1,514
2,000
550
550
300
300
-
-
100
-
100
-
-
2,000
2,000
1,000
-
500
-
500
-
300
-
380
-
150
-
100
-
1,000
2,000
300
330
1,514
2,000
550
550
82
300
-
-
-
-
-
-
-
2,000
2,000
1,000
-
500
-
500
-
150
-
150
-
50
-
35
-
1,000
2,000
300
330
2,000
2,000
275
550
32
300
-
-
-
-
-
-
-
700
1,500
350
-
300
-
300
-
-
-
-
-
-
-
-
-
1,000
2,000
300
500
850
1300
850
1300
850
1300
1310
1550
850
1310
850
1310
1550
850
1310
850
1310
850
1310
850
1310
850
1310
850
1310
850
1310
850
1310
850
1300
850
1300
10BASE-FL
100BASE-FX
1000BASE-SX*
1000BASE-LX*
10G BASE-SR/SW*
10G BASE-LX4*
10G BASE-LR/LW*
10G BASE-ER/EW*
40GBASE-SR4*
40GBASE-LR4
100GBASE-SR10*
100GBASE-LR4
100GBASE-ER4
266 Mbit/s
531 Mbit/s
1062 Mbit/s*
1 Gbit/s FC*
2 Gbit/s FC*
4 Gbit/s FC*
8 Gbit/s FC*
16 Gbit/s FC*
155 Mbit/s
622 Mbit/s*
Ethernet
Network application
* bandwidth limited at the length stated
For extended reach support per application per cabled fibre type contact Brand-Rex
Fibre Channel
ATM
Wavelength
l
nm
OM1
62.5/125
m
OM2
50/125
m
OM3
50/125
m
OM4
50/125
m
OS1
SMF
m
OS2
SMF
m
83
Distribution cables
FibrePlus distribution cables are
based around standard 900 μm tight
buffered element which offers excellent
environmental performance. The standard
range of distribution cables is available with
up to 24 fibres and the cables are designed
for use in building backbone applications.
Cable can be installed in cable conduits
by pulling or alternatively can be laid
in roof / floor voids.
The FibrePlus distribution cable range
has a Low Smoke Halogen Free sheath
and mechanical strength is derived from
strength members surrounding the
multiple tight buffered cores.
Breakout and patch cord cables
FibrePlus breakout cables are based
on standard 2.80mm single fibre cable
sub units and are designed for use in
building backbone applications or for
cross connections in equipment rooms
with suitable terminations. The cables
are designed to be pulled into conduits
or alternatively can be placed in floor /
roof void cable trays.
The single fibre cable sub unit consists of a
900 μm tight buffered fibre surrounded with
aramid yarns and a Low Smoke Halogen
Free sheath. The breakout cable takes
these sub unit, and adds additional aramid
strength members plus an outer Low Smoke
Halogen Free sheath to give a metal-free
robust and flexible breakout cable.
D I S T R I B U T I O N , B R E A K O U T & PAT C H C A B L E S
84
O62 050 OM3 OM4 BM3 BM4 008 108 208
LSHF Sheath
Strength Members
900μm Tight
Buffered Fibre
Compact Design
Water Blocked Design
Low Smoke Halogen Free Sheath
PRODUCT DESCRIPTION
For building backbone and horizontal distribution
applications, the PDC cable range has been
designed to be compact and yet offer excellent
tensile performance making it suitable for a wide
range of applications. The universal construction
enables the cable to be used internally and
externally without the need for transition
cable joints.
All universal PDC cables are constructed around
the 900μm tight buffered elements which
are suitable for direct termination.
Brand-Rex Optical Cables - Universal PDCTight Buffered Premise Distribution Cables
P R E M I S E D I S T R I B U T I O N C A B L E S
Temp - Operation:
-20°c to +60°c
Temp - Storage:
-20°c to +60°c
Temp - Installation:
-15°c to +60°c
Water Penetration:
≤3m @ 24 hours
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
15
Torsion (turns / m):
5
Fire:
IEC 60332-1
4.80
5.00
5.60
5.90
22
25
29
34 920
730
640
460 50
55
65
60
75
80
95
6.50 41 1100 70 100
7.20 47 1430 75 113
8.30 62 1430 85 128
85
2 Fibre
4 Fibre
6 Fibre
8 Fibre
12 Fibre
16 Fibre
24 Fibre
Diameter
mm
Weight
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
Product Data
8 Fibre
12 Fibre
16 Fibre
24 Fibre
6 Fibre
4 Fibre
2 Fibre
62.5/125 50/125 OM3 OM4 OS1/OS2
Product Part Numbering
HF 062 PDC02 LU
HF 062 PDC08 LU
HF 062 PDC06 LU
HF 062 PDC04 LU
HF 062 PDC12 LU
HF 062 PDC16 LU
HF 062 PDC24 LU
HF 050 PDC02 LU
HF 050 PDC08 LU
HF 050 PDC06 LU
HF 050 PDC04 LU
HF 050 PDC12 LU
HF 050 PDC16 LU
HF 050 PDC24 LU
HF OM3 PDC02 LU
HF OM3 PDC08 LU
HF OM3 PDC06 LU
HF OM3 PDC04 LU
HF OM3 PDC12 LU
HF OM3 PDC16 LU
HF OM3 PDC24 LU
HF OM4 PDC02 LU
HF OM4 PDC08 LU
HF OM4 PDC06 LU
HF OM4 PDC04 LU
HF OM4 PDC12 LU
HF OM4 PDC16 LU
HF OM4 PDC24 LU
HF 008 PDC02 LU
HF 008 PDC08 LU
HF 008 PDC12 LU
HF 008 PDC16 LU
HF 008 PDC24 LU
HF 008 PDC06 LU
HF 008 PDC04 LU
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
85
O62 050 OM3 OM4 BM3 BM4 008 108 208
Fibre Selection Codes
Brand-Rex Optical Cables - SFC and ZIPRuggedised Fibre Patch Cable
Rugged Construction for Indoor,
Short Run Patching
Easily configured into patch cords
Colour coded for identification
PRODUCT DESCRIPTION
Ruggedised tight buffered patching cable
is used in the manufacture of patch cords.
The robust construction is designed for short
run indoor patching or where frequent handling
is likely such as in equipment rooms, wiring
closets and at user outlets. The cable is readily
retained by industry standard connectors and
can easily be made into a patch cord.
The single fibre cable is colour coded for ease
of identification during and post installation.
62.5/125 50/125 OM3 OM4 OS1/OS2
HF 062 SFC01 L
HF 062 ZIP02 L
1 Fibre
2 Fibre
HF 050 SFC01 L
HF 050 ZIP02 L
HF OM3 SFC01 L
HF OM3 ZIP02 L
HF OM4 SFC01 L
HF OM4 ZIP02 L
HF 008 SFC01 L
HF 008 ZIP02 L
Product Part Numbering
LSHF Sheath
Aramid
Strength Members
900μm Tight Buffered Fibre
F I B R E PAT C H C A B L E
62.5/125 Blue
50/125 Green
OM3 Grey
OM4 Red
125 Yellow
62.5/125 Orange
50/125 Orange
OM3 Orange
OM4 Orange
OS1/OS2 Yellow
Non standard colour options are available on request.
Diameter
mm
Weight
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
Product Data
2.80
2.80 x 5.90
8
17
200
400
30
30 (minor axis)
45
45 (major axis)
1 Fibre
2 Fibre
Temp - Operation:
-20°c to +60°c
Temp - Storage:
-20°c to +60°c
Temp - Installation:
-15°c to +60°c
PRODUCT PERFORMANCE
Crush (N):
1500
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
Colour Coding - Core Colour Coding - Sheath
8686
O62 050 OM3 OM4 BM3 BM4 008 108 208
Brand-Rex Optical Cables - DUPRuggedised Duplex Breakout Cable
Rugged Construction for Indoor,
Short Run Patching
Easily configured into patch cords
Colour coded for identification
PRODUCT DESCRIPTION:
The duplex fibre cable is the building block for
ruggedised pigtail and patch cords. The robust
construction is designed for short run indoor
patching or where frequent handling is likely
such as in equipment rooms, wiring closets
and at user outlets.
3.80 x 6.60 29 400 40 (minor axis) 60 (minor axis)2 Fibre
Diameter
mm
Weight
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
Product Data
LSHF Outer Sheath
LSHF Unit Sheath
Aramid Strength Members
900μm Tight Buffered Fibre
D U P L E X B R E A K O U T C A B L E
Temp - Operation:
-20°c to +60°c
Temp - Storage:
-20°c to +60°c
Temp - Installation:
-15°c to +60°c
PRODUCT PERFORMANCE:
Crush (N):
2000
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1HF 062 DUP02 L2 Fibre
62.5/125 50/125 OM3 8/125
HF 050 DUP02 L HF OM3 DUP02 L HF 008 DUP02 L
Product Part Numbering
62.5/125 Blue
50/125 Green
OM3 Grey
OM4 Red
8/125 Yellow
62.5/125 Orange
50/125 Orange
OM3 Orange
OM4 Orange
8/125 Yellow
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
Colour Coding - Core Colour Coding - Ruggedised Unit
87
FibrePlus loose tube cables are available in
unitube or multi loose tube constructions,
in three standard variants. Multi loose tube
cables are available as standard in 6 x 4 fibre
per tube, 6 x 12 fibre per tube, 8 x 12 fibre
per tube, 12 x 12 fibre per tube and 24 x 12
fibre per tubes options, offering up to
288 fibres.
The three standard variants are a general
duct grade cable; a glass yarn armoured
cable and a corrugated steel tape
armoured direct burial cable.
Loose tube cables are designed for use
in building or campus backbone applications
and can be installed by blowing, winching
or pulling into existing sub ducts or cable
conduits. Steel tape armoured products
can also be direct buried.
Bespoke loose tube cables to client
specifications with additional features
or modified mechanical performance
are available on request subject to
MOQ and lead-time.
L O O S E T U B E C A B L E S
88
O62 050 OM3 OM4 BM3 BM4 008 108 208
Brand-Rex Optical CablesMini Unitube Cable
M I N I U N I T U B E C A B L E S
Universal Mini Unitube Cable
Up to 4 fibres
Layer of non metallic strength members
White, Low Smoke, Halogen Free Sheath
PRODUCT DESCRIPTION
For Fibre to the home (FTTH) and short run
backbone applications, the Mini Unitube cable
range has been designed to be lightweight,
flexible, compact and completed with a
white sheath to be discrete in the home.
The 2 and 4 fibre variants are ideal FTTH
products, constructed with a 1.9mm gel filled
loose tube, layer of glass yarns and a Low
smoke halogen free (LSHF) outer sheath.
PRODUCT PERFORMANCE
Crush (N): 1000
Temp - Operational: -20°C to +60°C
Temp - Storage: -20°C to +70°C
Temp - Installation: -10°C to +40°C
Impact Resistance: 1J
Torsion: 20N / 10 cycles
Water Penetration: < 3 m @ 24 h
Fire Performance: IEC 60332-1-2
Corrosive & acid gases: IEC 60754
Individual Coloured
Fibres
Gel filled Loose Tube
Water-blocking
Glass Yarns
LSHF Sheath
Product Data
Mini Unitube 343.4 40011
Product Part Numbers
HF062UNI1902LU
HF062UNI1904LU
62.5/125
HF050UNI1902LU
HF050UNI1904LU
50/125
HFOM3UNI1902LU
HFOM3UNI1904LU
HFOM4UNI1902LU
HFOM4UNI1904LU
0M3 0M4
HF008UNI1902LU
HF008UNI1904LU
OS1/OS2
51
2 Fibre
4 Fibre
Fibre Count
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
Diameter
mm
Weight
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
89
63
O62 050 OM3 OM4 BM3 BM4 008 108 208
LSHF or PE Sheath
Gel Filled Loose Tube
Water Blocking
Glass Yarns
Individual Coloured Fibres
Compact Water Blocked Design
Up to 24 Fibres
Level 1 Rodent Protection
Choice of Universal or External Sheath
PRODUCT DESCRIPTION
For building backbone applications, the duct
grade unitube cable range has been designed
to be lightweight and compact.
The 4-12 fibre product variants are constructed
around a 2.90mm gel filled loose tube, whereas
the 16-24 fibre variants use a 4.00mm loose tube.
D U C T G R A D E U N I T U B E C A B L E S
Brand-Rex Optical Cables - UDU and UDEDuct Grade Unitube Cables
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
PRODUCT PERFORMANCE
Crush (N):
1500
Impact (Nm):
3
Torsion (cycles):
5
Fire:
IEC 60332-1 (UDU only)
8 Fibre
6 Fibre
4 Fibre
GF 062 UNI24 LU
GF 062 UNI16 LU
GF 062 UNI12 LU
GF 062 UNI08 LU
GF 062 UNI06 LU
GF 062 UNI04 LU
62.5/125 50/125
GF 050 UNI24 LU
GF 050 UNI16 LU
GF 050 UNI12 LU
GF 050 UNI08 LU
GF 050 UNI06 LU
GF 050 UNI04 LU
OM3
GF OM3 UNI24 LU
GF OM3 UNI16 LU
GF OM3 UNI12 LU
GF OM3 UNI08 LU
GF OM3 UNI06 LU
GF OM3 UNI04 LU
OM4
GF OM4 UNI24 LU
GF OM4 UNI16 LU
GF OM4 UNI12 LU
GF OM4 UNI08 LU
GF OM4 UNI06 LU
GF OM4 UNI04 LU
OS1/OS2
GF 008 UNI24 LU
GF 008 UNI16 LU
GF 008 UNI12 LU
GF 008 UNI08 LU
GF 008 UNI06 LU
GF 008 UNI04 LU
Product Part Numbering - UDU - Universal
16 Fibre(2 x Bundles)
24 Fibre(2 x Bundles)
12 Fibre
8 Fibre
6 Fibre
4 Fibre
GF 062 UNI24 NM
GF 062 UNI16 NM
GF 062 UNI12 NM
GF 062 UNI08 NM
GF 062 UNI06 NM
GF 062 UNI04 NM
62.5/125 50/125
GF 050 UNI24 NM
GF 050 UNI16 NM
GF 050 UNI12 NM
GF 050 UNI08 NM
GF 050 UNI06 NM
GF 050 UNI04 NM
OM3
GF OM3 UNI24 NM
GF OM3 UNI16 NM
GF OM3 UNI12 NM
GF OM3 UNI08 NM
GF OM3 UNI06 NM
GF OM3 UNI04 NM
OM4
GF OM4 UNI24 NM
GF OM4 UNI16 NM
GF OM4 UNI12 NM
GF OM4 UNI08 NM
GF OM4 UNI06 NM
GF OM4 UNI04 NM
OS1/OS2
GF 008 UNI24 NM
GF 008 UNI16 NM
GF 008 UNI12 NM
GF 008 UNI08 NM
GF 008 UNI06 NM
GF 008 UNI04 NM
Product Part Numbering - UDE - External
16 Fibre(2 x Bundles)
24 Fibre(2 x Bundles)
Product Data
5.8
6.9
37/28
48/37 1000
1000 58
69
87
104
4 - 12 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
16 - 24 Fibre(2 x Bundles)
12 Fibre
Fibre Selection Codes The mechanical performance of these cables complies with IEC60794-3-11
Tested in accordance with IEC 60794-1-2 unless stated
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. GFOM3PDC24LU becomes GFBM3PDC24LU.
90
O62 050 OM3 OM4 BM3 BM4 008 108 208
63
Brand-Rex Optical Cables - URU and UREGlass Yarn Armoured Unitube Cable
Compact Water Blocked Design
Glass Yarn Armouring
Level 2 Rodent Protection
Up to 24 fibres
Choice of Universal or External Sheath
PRODUCT DESCRIPTION
For applications where protection from rodent
attack is required, this product range offers level
2 rodent protection in the form of glass roving
armour which deters rodents from chewing
on optical cables.
The 4-12 fibre product variants are constructed
around a 2.90mm gel filled loose tube, whereas
the 16-24 fibre variants use a 4.00mm loose tube.
Product Part Numbering - URU - Universal
G L A S S A R M O U R E D U N I T U B E
LSHF or PE Sheath
Gel Filled Loose Tube
Rodent resistant
Glass Yarn Armouring
Individual Coloured Fibres
Product Part Numbering - URE - External
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
5
Torsion (Cycles):
5
Fire:
IEC 60332-1 (URU only)
12 Fibre
8 Fibre
6 Fibre
4 Fibre
16 Fibre
(2 x Bundles)
24 Fibre(2 x Bundles)
GF 062 UNI24 RR LU
GF 062 UNI16 RR LU
GF 062 UNI12 RR LU
GF 062 UNI08 RR LU
GF 062 UNI06 RR LU
GF 062 UNI04 RR LU
62.5/125 50/125
GF 050 UNI24 RR LU
GF 050 UNI16 RR LU
GF 050 UNI12 RR LU
GF 050 UNI08 RR LU
GF 050 UNI06 RR LU
GF 050 UNI04 RR LU
OM3
GF OM3 UNI24 RR LU
GF OM3 UNI16 RR LU
GF OM3 UNI12 RR LU
GF OM3 UNI08 RR LU
GF OM3 UNI06 RR LU
GF OM3 UNI04 RR LU
OM4
GF OM4 UNI24 RR LU
GF OM4 UNI16 RR LU
GF OM4 UNI12 RR LU
GF OM4 UNI08 RR LU
GF OM4 UNI06 RR LU
GF OM4 UNI04 RR LU
OS1/OS2
GF 008 UNI24 RR LU
GF 008 UNI16 RR LU
GF 008 UNI12 RR LU
GF 008 UNI08 RR LU
GF 008 UNI06 RR LU
GF 008 UNI04 RR LU
Product Data
7.4
8.1
65/50
73/58 2800
2800 74
81
111
122
4 - 12 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
16 - 24 Fibre(2 x Bundles)
12 Fibre
8 Fibre
6 Fibre
4 Fibre
16 Fibre
(2 x Bundles)
24 Fibre(2 x Bundles)
GF 062 UNI24 RR NM
GF 062 UNI16 RR NM
GF 062 UNI12 RR NM
GF 062 UNI08 RR NM
GF 062 UNI06 RR NM
GF 062 UNI04 RR NM
62.5/125 50/125
GF 050 UNI24 RR NM
GF 050 UNI16 RR NM
GF 050 UNI12 RR NM
GF 050 UNI08 RR NM
GF 050 UNI06 RR NM
GF 050 UNI04 RR NM
OM3
GF OM3 UNI24 RR NM
GF OM3 UNI16 RR NM
GF OM3 UNI12 RR NM
GF OM3 UNI08 RR NM
GF OM3 UNI06 RR NM
GF OM3 UNI04 RR NM
OM4
GF OM4 UNI24 RR NM
GF OM4 UNI16 RR NM
GF OM4 UNI12 RR NM
GF OM4 UNI08 RR NM
GF OM4 UNI06 RR NM
GF OM4 UNI04 RR NM
OS1/OS2
GF 008 UNI24 RR NM
GF 008 UNI16 RR NM
GF 008 UNI12 RR NM
GF 008 UNI08 RR NM
GF 008 UNI06 RR NM
GF 008 UNI04 RR NM
Fibre Selection Codes The mechanical performance of these cables complies with IEC60794-3-11
Tested in accordance with IEC 60794-1-2 unless stated
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. GFOM3PDC24LU becomes GFBM3PDC24LU.
91
O62 050 OM3 OM4 BM3 BM4 008 108 208
63
Brand-Rex Optical Cables - USU and USESteel Tape Armoured Unitube Cables
Steel Tape Armouring
Maximum Protection from Rodents
Choice of Universal or External Sheath
PRODUCT DESCRIPTION
For direct burial campus backbone applications,
the steel tape armoured unitube cable range
has been designed to be compact and yet offer
excellent tensile and crush performance making
it suitable for a wide range of applications.
All USU and USE steel tape armoured unitube
cables are constructed around the 4.00mm gel
filled PBT loose buffer tube. The 16-24 fibre
variants are supplied with 2 bundles within
the loose tube.
S T E E L TA P E A R M O U R E D U N I T U B E
24 Fibre
16 Fibre
12 Fibre
8 Fibre
6 Fibre
4 Fibre
GF 062 UNI24 STA LU
GF 062 UNI16 STA LU
GF 062 UNI12 STA LU
GF 062 UNI08 STA LU
GF 062 UNI06 STA LU
GF 062 UNI04 STA LU
62.5/125 50/125
GF 050 UNI24 STA LU
GF 050 UNI16 STA LU
GF 050 UNI12 STA LU
GF 050 UNI08 STA LU
GF 050 UNI06 STA LU
GF 050 UNI04 STA LU
OM3
GF OM3 UNI24 STA LU
GF OM3 UNI16 STA LU
GF OM3 UNI12 STA LU
GF OM3 UNI08 STA LU
GF OM3 UNI06 STA LU
GF OM3 UNI04 STA LU
OM4
GF OM4 UNI24 STA LU
GF OM4 UNI16 STA LU
GF OM4 UNI12 STA LU
GF OM4 UNI08 STA LU
GF OM4 UNI06 STA LU
GF OM4 UNI04 STA LU
OS1/OS2
GF 008 UNI24 STA LU
GF 008 UNI16 STA LU
GF 008 UNI12 STA LU
GF 008 UNI08 STA LU
GF 008 UNI06 STA LU
GF 008 UNI04 STA LU
Product Part Numbering - USU - Universal
Product Data
10.00
10.00
125/100
125/100 1000
1000 100
100
150
150
4 - 12 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
16 - 24 Fibre(2 x Bundles)
24 Fibre
16 Fibre
12 Fibre
8 Fibre
6 Fibre
4 Fibre
GF 062 UNI24 STA NM
GF 062 UNI16 STA NM
GF 062 UNI12 STA NM
GF 062 UNI08 STA NM
GF 062 UNI06 STA NM
GF 062 UNI04 STA NM
62.5/125 50/125
GF 050 UNI24 STA NM
GF 050 UNI16 STA NM
GF 050 UNI12 STA NM
GF 050 UNI08 STA NM
GF 050 UNI06 STA NM
GF 050 UNI04 STA NM
OM3
GF OM3 UNI24 STA NM
GF OM3 UNI16 STA NM
GF OM3 UNI12 STA NM
GF OM3 UNI08 STA NM
GF OM3 UNI06 STA NM
GF OM3 UNI04 STA NM
OM4
GF OM4 UNI24 STA NM
GF OM4 UNI16 STA NM
GF OM4 UNI12 STA NM
GF OM4 UNI08 STA NM
GF OM4 UNI06 STA NM
GF OM4 UNI04 STA NM
OS1/OS2
GF 008 UNI24 STA NM
GF 008 UNI16 STA NM
GF 008 UNI12 STA NM
GF 008 UNI08 STA NM
GF 008 UNI06 STA NM
GF 008 UNI04 STA NM
Product Part Numbering - USE - External
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
PRODUCT PERFORMANCE
Crush (N):
4000
Impact (Nm):
10
Torsion (turns/m):
5
Fire:
IEC 60332-1 (USU only)
LSHF or PE Sheath
Gel Filled Loose Tube
Glass Yarns
Individual Coloured Fibres
Corrugated Steel Tape Armour
Fibre Selection CodesTested in accordance with IEC60794-3-11, IEC 60794-1-2 unless stated.
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. GFOM3PDC24LU becomes GFBM3PDC24LU.
92
O62 050 OM3 OM4 BM3 BM4 008 108 208
63
Brand-Rex Optical Cables - UTU and UTETwin Sheath Steel Tape Armoured Unitube Cables
Twin Sheath Water Blocked Design
Steel Tape Armouring
Maximum Rodent Protection
Choice of Universal or External Sheath
PRODUCT DESCRIPTION
For direct burial campus backbone applications,
the twin sheath universal steel tape armoured
unitube cable range has been designed to be
compact and yet offer excellent tensile and crush
performance making it suitable for a wide range
of applications.
The 4-12 fibre product variants are constructed
around a 2.90mm gel filled loose tube, whereas
the 16-24 fibre variants use a 4.00mm loose tube.
Product Part Numbering - UTU - Universal
S T E E L TA P E A R M O U R E D U N I T U B E
LSHF or PE Outer Sheath
LSHF or PE Inner Sheath
Gel Filled Loose Tube
Glass Yarns
Individual Coloured Fibres
Corrugated Steel Tape ArmourProduct Data
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
(up to inner sheath)
PRODUCT PERFORMANCE
Crush (N):
5000
Impact (Nm):
15
Torsion (turns/m):
5
Fire:
IEC 60332-1 (USU2 only)
24 Fibre
16 Fibre
12 Fibre
8 Fibre
6 Fibre
4 Fibre
GF 062 UNI24 L STA LU
GF 062 UNI16 L STA LU
GF 062 UNI12 L STA LU
GF 062 UNI08 L STA LU
GF 062 UNI06 L STA LU
GF 062 UNI04 L STA LU
62.5/125 50/125
GF 050 UNI24 L STA LU
GF 050 UNI16 L STA LU
GF 050 UNI12 L STA LU
GF 050 UNI08 L STA LU
GF 050 UNI06 L STA LU
GF 050 UNI04 L STA LU
OM3
GF OM3 UNI24 L STA LU
GF OM3 UNI16 L STA LU
GF OM3 UNI12 L STA LU
GF OM3 UNI08 L STA LU
GF OM3 UNI06 L STA LU
GF OM3 UNI04 L STA LU
OM4
GF OM4 UNI24 L STA LU
GF OM4 UNI16 L STA LU
GF OM4 UNI12 L STA LU
GF OM4 UNI08 L STA LU
GF OM4 UNI06 L STA LU
GF OM4 UNI04 L STA LU
OS1/OS2
GF 008 UNI24 L STA LU
GF 008 UNI16 L STA LU
GF 008 UNI12 L STA LU
GF 008 UNI08 L STA LU
GF 008 UNI06 L STA LU
GF 008 UNI04 L STA LU
11.00
12.00
156/119
180/137 1000
1000 110
120
165
180
4 - 12 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
16 - 24 Fibre(2 x Bundles)
24 Fibre
16 Fibre
12 Fibre
8 Fibre
6 Fibre
4 Fibre
GF 062 UNI24 NM STA NM
GF 062 UNI16 NM STA NM
GF 062 UNI12 NM STA NM
GF 062 UNI08 NM STA NM
GF 062 UNI06 NM STA NM
GF 062 UNI04 NM STA NM
62.5/125 50/125
GF 050 UNI24 NM STA NM
GF 050 UNI16 NM STA NM
GF 050 UNI12 NM STA NM
GF 050 UNI08 NM STA NM
GF 050 UNI06 NM STA NM
GF 050 UNI04 NM STA NM
OM3
GF OM3 UNI24 NM STA NM
GF OM3 UNI16 NM STA NM
GF OM3 UNI12 NM STA NM
GF OM3 UNI08 NM STA NM
GF OM3 UNI06 NM STA NM
GF OM3 UNI04 NM STA NM
OM4
GF OM4 UNI24 NM STA NM
GF OM4 UNI16 NM STA NM
GF OM4 UNI12 NM STA NM
GF OM4 UNI08 NM STA NM
GF OM4 UNI06 NM STA NM
GF OM4 UNI04 NM STA NM
OS1/OS2
GF 008 UNI24 NM STA NM
GF 008 UNI16 NM STA NM
GF 008 UNI12 NM STA NM
GF 008 UNI08 NM STA NM
GF 008 UNI06 NM STA NM
GF 008 UNI04 NM STA NM
Product Part Numbering - UTE - External
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. GFOM3PDC24LU becomes GFBM3PDC24LU.
Tested in accordance with IEC60794-3-11, IEC 60794-1-2 unless stated.
93
O62 050 OM3 OM4 BM3 BM4 008 108 208
63
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1(MDU only)
Product Part Numbering - MDU 01 - Universal
Product Part Numbering - MDE 01 - External
Brand-Rex Optical Cables - Universal MDU 01 and External MDE 01Duct Grade Multi Loose Tube Cable
D U C T G R A D E M U LT I L O O S E T U B E C A B L E
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
6 x 4 Fibres Per Tube
Offering Up To 24 Fibres
2.10mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For applications where a higher tensile load
is required versus that offered by unitube
constructions, the universal product range
offers compact low fibre count duct grade cable.
The product range consists of multiple loose
tubes containing up to 4 fibres and solid fillers
where required, stranded around a rigid glass
non metallic central strength member. A layer
of water blocking tape provides interstitial
water blocking.
LSHF or PE Sheath
Gel Filled
Loose Tube
Individual Coloured Fibres
Rigid Glass Central
Strength Member
Water Blocking Tape
Product Data
24 Fibre
20 Fibre
16 Fibre
12 Fibre
8 Fibre
4 Fibre
HF 062 S24 W LU 4FT
HF 062 S20 W LU 4FT
HF 062 S16 W LU 4FT
HF 062 S12 W LU 4FT
HF 062 S8 W LU 4FT
HF 062 S4 W LU 4FT
62.5/125 50/125
HF 050 S24 W LU 4FT
HF 050 S20 W LU 4FT
HF 050 S16 W LU 4FT
HF 050 S12 W LU 4FT
HF 050 S8 W LU 4FT
HF 050 S4 W LU 4FT
OM3
HF OM3 S24 W LU 4FT
HF OM3 S20 W LU 4FT
HF OM3 S16 W LU 4FT
HF OM3 S12 W LU 4FT
HF OM3 S8 W LU 4FT
HF OM3 S4 W LU 4FT
OM4
HF OM4 S24 W LU 4FT
HF OM4 S20 W LU 4FT
HF OM4 S16 W LU 4FT
HF OM4 S12 W LU 4FT
HF OM4 S8 W LU 4FT
HF OM4 S4 W LU 4FT
OS1/OS2
HF 008 S24 W LU 4FT
HF 008 S20 W LU 4FT
HF 008 S16 W LU 4FT
HF 008 S12 W LU 4FT
HF 008 S8 W LU 4FT
HF 008 S4 W LU 4FT
10.00 96/71 1500 100 1504 - 24 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
24 Fibre
20 Fibre
16 Fibre
12 Fibre
8 Fibre
4 Fibre
HF 062 S24 W NM 4FT
HF 062 S20 W NM 4FT
HF 062 S16 W NM 4FT
HF 062 S12 W NM 4FT
HF 062 S8 W NM 4FT
HF 062 S4 W NM 4FT
62.5/125 50/125
HF 050 S24 W NM 4FT
HF 050 S20 W NM 4FT
HF 050 S16 W NM 4FT
HF 050 S12 W NM 4FT
HF 050 S8 W NM 4FT
HF 050 S4 W NM 4FT
OM3
HF OM3 S24 W NM 4FT
HF OM3 S20 W NM 4FT
HF OM3 S16 W NM 4FT
HF OM3 S12 W NM 4FT
HF OM3 S8 W NM 4FT
HF OM3 S4 W NM 4FT
OM4
HF OM4 S24 W NM 4FT
HF OM4 S20 W NM 4FT
HF OM4 S16 W NM 4FT
HF OM4 S12 W NM 4FT
HF OM4 S8 W NM 4FT
HF OM4 S4 W NM 4FT
OS1/OS2
HF 008 S24 W NM 4FT
HF 008 S20 W NM 4FT
HF 008 S16 W NM 4FT
HF 008 S12 W NM 4FT
HF 008 S8 W NM 4FT
HF 008 S4 W NM 4FT
Tested in accordance with IEC 60794-1-2 unless stated
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
94
O62 050 OM3 OM4 BM3 BM4 008 108 208
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
5
Torsion (turns/m):
5
Fire:
IEC 60332-1
(MDU only)
Brand-Rex Optical Cables - Universal MDU 06 and External MDE 06Universal Duct Grade Multi Loose Tube Cable
D U C T G R A D E M U LT I L O O S E T U B E C A B L E
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
5 x 12 Fibres Per Tube Offering up to 60 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For building and campus backbone applications
where higher fibre counts are required, the
product range offers a compact duct grade cable.
The product range consists of multiple loose
tubes containing up to 12 fibres and solid fillers
where required, stranded around a rigid glass non
metallic central strength member. A layer of water
blocking tape provides interstitial water blocking.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
Product Data
10.40 101/76 2000 104 15612 - 60 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
60 Fibre
48 Fibre
36 Fibre
24 Fibre
12 Fibre
GF 062 S60 W LU
GF 062 S48 W LU
GF 062 S36 W LU
GF 062 S24 W LU
GF 062 S12 W LU
62.5/125 50/125
GF 050 S60 W LU
GF 050 S48 W LU
GF 050 S36 W LU
GF 050 S24 W LU
GF 050 S12 W LU
OM3
GF OM3 S60 W LU
GF OM3 S48 W LU
GF OM3 S36 W LU
GF OM3 S24 W LU
GF OM3 S12 W LU
OM4
GF OM4 S60 W LU
GF OM4 S48 W LU
GF OM4 S36 W LU
GF OM4 S24 W LU
GF OM4 S12 W LU
OS1/OS2
GF 008 S60 W LU
GF 008 S48 W LU
GF 008 S36 W LU
GF 008 S24 W LU
GF 008 S12 W LU
Product Part Numbering - MDU 06 - Universal
60 Fibre
48 Fibre
36 Fibre
24 Fibre
12 Fibre
GF 062 S60 W NM
GF 062 S48 W NM
GF 062 S36 W NM
GF 062 S24 W NM
GF 062 S12 W NM
62.5/125 50/125
GF 050 S60 W NM
GF 050 S48 W NM
GF 050 S36 W NM
GF 050 S24 W NM
GF 050 S12 W NM
OM3
GF OM3 S60 W NM
GF OM3 S48 W NM
GF OM3 S36 W NM
GF OM3 S24 W NM
GF OM3 S12 W NM
OM4
GF OM4 S60 W NM
GF OM4 S48 W NM
GF OM4 S36 W NM
GF OM4 S24 W NM
GF OM4 S12 W NM
OS1/OS2
GF 008 S60 W NM
GF 008 S48 W NM
GF 008 S36 W NM
GF 008 S24 W NM
GF 008 S12 W NM
Product Part Numbering - MDE 06 - External
Fibre Selection Codes
LSHF or PE Sheath
Gel Filled
Loose Tube
Individual Coloured Fibres
Rigid Glass Central
Strength Member
Water Blocking Tape
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. GFOM3PDC24LU becomes GFBM3PDC24LU.
Tested in accordance with IEC60794-3-11, IEC 60794-1-2 unless stated.
95
O62 050 OM3 OM4 BM3 BM4 008 108 208
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
5
Torsion (turns/m):
5
Fire:
IEC 60332-1
(MDU only)
Brand-Rex Optical Cables - Universal MDU 02 and External MDE 02Universal Duct Grade Multi Loose Tube Cable
D U C T G R A D E M U LT I L O O S E T U B E C A B L E
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
6 x 12 Fibres Per Tube Offering up to 72 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For building and campus backbone applications
where higher fibre counts are required, the
product range offers a compact duct grade cable.
The product range consists of multiple loose
tubes containing up to 12 fibres and solid fillers
where required, stranded around a rigid glass non
metallic central strength member. A layer of water
blocking tape provides interstitial water blocking.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
LSHF or PE Sheath
Gel Filled
Loose Tube
Individual Coloured Fibres
Rigid Glass Central
Strength Member
Water Blocking Tape
Product Data
11.20 118/90 2700 112 16872 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
72 Fibre GF 062 S72 W LU
62.5/125 50/125
GF 050 S72 W LU
OM3
GF OM3 S72 W LU
OM4
GF OM4 S72 W LU
OS1/OS2
GF 008 S72 W LU
Product Part Numbering - MDU 02 - Universal
72 Fibre
Product Part Numbering - MDE 02 - External
Fibre Selection Codes
62.5/125
GF 062 S72 W NM
50/125
GF 050 S72 W NM
OM3
GF OM3 S72 W NM
OM4
GF OM4 S72 W NM
OS1/OS2
GF 008 S72 W NM
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. GFOM3PDC24LU becomes GFBM3PDC24LU.
Tested in accordance with IEC60794-3-11, IEC 60794-1-2 unless stated.
96
O62 050 OM3 OM4 BM3 BM4 008 108 208
LSHF or PE Sheath
Gel Filled
Loose Tube
Individual Coloured Fibres
Rigid Glass Central
Strength Member
Water Blocking Tape
Brand-Rex Optical Cables - Universal MDU 04 and External MDE 04Universal Duct Grade Multi Loose Tube Cable
D U C T G R A D E M U LT I L O O S E T U B E C A B L E
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
8 x 12 Fibres Per Tube Offering up to 96 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For building and campus backbone applications
where higher fibre counts are required, the
product range offers a compact duct grade cable.
The product range consists of multiple loose
tubes containing up to 12 fibres and solid fillers
where required, stranded around a rigid glass non
metallic central strength member. A layer of water
blocking tape provides interstitial water blocking.
Product Data
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MDU only)
Product Part Numbering - MDU 04 - Universal
12.60 150/118 3000 126 18984 - 96 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
84 Fibre
96 Fibre
62.5/125
HF 062 S84 W LU
HF 062 S96 W LU
50/125
HF 050 S84 W LU
HF 050 S96 W LU
OM3
HF OM3 S84 W LU
HF OM3 S96 W LU
OM4
HF OM4 S84 W LU
HF OM4 S96 W LU
OS1/OS2
HF 008 S84 W LU
HF 008 S96 W LU
Product Part Numbering - MDE 04 - External
84 Fibre
96 Fibre
62.5/125
HF 062 S84 W NM
HF 062 S96 W NM
50/125
HF 050 S84 W NM
HF 050 S96 W NM
OM3
HF OM3 S84 W NM
HF OM3 S96 W NM
OM4
HF OM4 S84 W NM
HF OM4 S96 W NM
OS1/OS2
HF 008 S84 W NM
HF 008 S96 W NM
Tested in accordance with IEC 60794-1-2 unless stated
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
97
O62 050 OM3 OM4 BM3 BM4 008 108 208
Brand-Rex Optical Cables - Universal MDU 03 and External MDE 03Duct Grade Multi Loose Tube Cable
144 Fibre
132 Fibre
120 Fibre
108 Fibre
HF 062 S144 W LU
HF 062 S132 W LU
HF 062 S120 W LU
HF 062 S108 W LU
62.5/125 50/125
HF 050 S144 W LU
HF 050 S132 W LU
HF 050 S120 W LU
HF 050 S108 W LU
OM3
HF OM3 S144 W LU
HF OM3 S132 W LU
HF OM3 S120 W LU
HF OM3 108 W LU
OM4
HF OM4 S144 W LU
HF OM4 S132 W LU
HF OM4 S120 W LU
HF OM4 108 W LU
OS1/OS2
HF 008 S144 W LU
HF 008 S132 W LU
HF 008 S120 W LU
HF 008 S108 W LU
Product Part Numbering - MDU 03 - Universal
D U C T G R A D E M U LT I L O O S E T U B E C A B L E
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
12 x 12 Fibres Per Tube Offering up to 144 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For higher fibre count building and campus
backbone applications the product range
delivers up to 144 fibres in a compact duct grade
construction. The product range consists of
multiple 2.50mm loose tubes containing up to
12 fibres and solid fillers where required, stranded
around a sheathed rigid glass non metallic central
strength member. A layer of water blocking tape
provides interstitial water blocking.
Product Part Numbering - MDE 03 - External
LSHF or PE Sheath
Gel Filled
Loose Tube
Individual Coloured Fibres
Water Blocking Tape
Central Strength Member Sheath
Rigid Glass Central Strength Member
Product Data
16.00 222/180 2000 160 240108 - 144 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MDU only)
144 Fibre
132 Fibre
120 Fibre
108 Fibre
HF 062 S144 W NM
HF 062 S132 W NM
HF 062 S120 W NM
HF 062 S108 W NM
62.5/125 50/125
HF 050 S144 W NM
HF 050 S132 W NM
HF 050 S120 W NM
HF 050 S108 W NM
OM3
HF OM3 S144 W NM
HF OM3 S132 W NM
HF OM3 S120 W NM
HF OM3 108 W NM
OM4
HF OM4 S144 W NM
HF OM4 S132 W NM
HF OM4 S120 W NM
HF OM4 108 W NM
OS1/OS2
HF 008 S144 W NM
HF 008 S132 W NM
HF 008 S120 W NM
HF 008 S108 W NM
Tested in accordance with IEC 60794-1-2 unless stated
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
98
O62 050 OM3 OM4 BM3 BM4 008 108 208
LSHF or PE Sheath
Gel Filled
Loose Tube
Individual Coloured Fibres
Water Blocking Tape
Rigid Glass Central Strength Member
Brand-Rex Optical Cables - Universal MDU 05 and External MDE 05Duct Grade Multi Loose Tube Cable
D U C T G R A D E M U LT I L O O S E T U B E C A B L E
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
18 x 12 Fibres Per Tube Offering up to 216 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For higher fibre count building and campus
backbone applications the product range
delivers up to 216 fibres in a compact duct grade
construction. The product range consists of
multiple 2.50mm loose tubes containing up to
12 fibres and solid fillers where required, stranded
around a sheathed rigid glass non metallic central
strength member. A layer of water blocking tape
provides interstitial water blocking.
Tested in accordance with IEC 60794-1-2 unless stated
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MDU only)
192 Fibre
180 Fibre
168 Fibre
156 Fibre
Product Part Numbering - MDU 05 - Universal
204 Fibre
216 Fibre
HF 062 S192 W LU
HF 062 S180 W LU
HF 062 S168 W LU
HF 062 S156 W LU
62.5/125
HF 062 S204 W LU
HF 062 S216 W LU
50/125
HF 050 S192 W LU
HF 050 S180 W LU
HF 050 S168 W LU
HF 050 S156 W LU
HF 050 S204 W LU
HF 050 S216 W LU
OM3
HF OM3 S192 W LU
HF OM3 S180 W LU
HF OM3 S168 W LU
HF OM3 S156 W LU
HF OM3 S204 W LU
HF OM3 S216 W LU
OM4
HF OM4 S192 W LU
HF OM4 S180 W LU
HF OM4 S168 W LU
HF OM4 S156 W LU
HF OM4 S204 W LU
HF OM4 S216 W LU
OS1/OS2
HF 008 S192 W LU
HF 008 S180 W LU
HF 008 S168 W LU
HF 008 S156 W LU
HF 008 S204 W LU
HF 008 S216 W LU
192 Fibre
180 Fibre
168 Fibre
156 Fibre
Product Part Numbering - MDE 05 - External
216 Fibre
204 Fibre
HF 062 S192 W NM
HF 062 S180 W NM
HF 062 S168 W NM
HF 062 S156 W NM
62.5/125
HF 062 S204 W NM
HF 062 S216 W NM
50/125
HF 050 S192 W NM
HF 050 S180 W NM
HF 050 S168 W NM
HF 050 S156 W NM
HF 050 S204 W NM
HF 050 S216 W NM
OM3
HF OM3 S192 W NM
HF OM3 S180 W NM
HF OM3 S168 W NM
HF OM3 156 W NM
HF OM3 S204 W NM
HF OM3 S216 W NM
OM4
HF OM4 S192 W NM
HF OM4 S180 W NM
HF OM4 S168 W NM
HF OM4 156 W NM
HF OM4 S204 W NM
HF OM4 S216 W NM
OS1/OS2
HF 008 S192 W NM
HF 008 S180 W NM
HF 008 S168 W NM
HF 008 S156 W NM
HF 008 S204 W NM
HF 008 S216 W NM
Product Data
16.50 220/177 2000 165 248156 - 216 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
99
O62 050 OM3 OM4 BM3 BM4 008 108 208
Brand-Rex Optical Cables - Universal MRU 01 and External MRE 01Glass Yarn Armoured Rodent Resistant Multi Loose Tube Cable
Product Part Numbering - MRU 01 - Universal
G L A S S YA R N A R M O U R E D M U LT I L O O S E T U B E C A B L E
Product Data
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
24 Fibre
20 Fibre
16 Fibre
12 Fibre
8 Fibre
4 Fibre
HF 062 S24 W RR LU 4FT
HF 062 S20 W RR LU 4FT
HF 062 S16 W RR LU 4FT
HF 062 S12 W RR LU 4FT
HF 062 S8 W RR LU 4FT
HF 062 S4 W RR LU 4FT
62.5/125 50/125
HF 050 S24 W RR LU 4FT
HF 050 S20 W RR LU 4FT
HF 050 S16 W RR LU 4FT
HF 050 S12 W RR LU 4FT
HF 050 S8 W RR LU 4FT
HF 050 S4 W RR LU 4FT
OM3
HF OM3 S24 W RR LU 4FT
HF OM3 S20 W RR LU 4FT
HF OM3 S16 W RR LU 4FT
HF OM3 S12 W RR LU 4FT
HF OM3 S8 W RR LU 4FT
HF OM3 S4 W RR LU 4FT
OM4
HF OM4 S24 W RR LU 4FT
HF OM4 S20 W RR LU 4FT
HF OM4 S16 W RR LU 4FT
HF OM4 S12 W RR LU 4FT
HF OM4 S8 W RR LU 4FT
HF OM4 S4 W RR LU 4FT
OS1/OS2
HF 008 S24 W RR LU 4FT
HF 008 S20 W RR LU 4FT
HF 008 S16 W RR LU 4FT
HF 008 S12 W RR LU 4FT
HF 008 S8 W RR LU 4FT
HF 008 S4 W RR LU 4FT
11.1 149/118 4400 110 1674 - 24 Fibre
24 Fibre
20 Fibre
16 Fibre
12 Fibre
8 Fibre
4 Fibre
HF 062 S24 W RR NM 4FT
HF 062 S20 W RR NM 4FT
HF 062 S16 W RR NM 4FT
HF 062 S12 W RR NM 4FT
HF 062 S8 W RR NM 4FT
HF 062 S4 W RR NM 4FT
62.5/125 50/125
HF 050 S24 W RR NM 4FT
HF 050 S20 W RR NM 4FT
HF 050 S16 W RR NM 4FT
HF 050 S12 W RR NM 4FT
HF 050 S8 W RR NM 4FT
HF 050 S4 W RR NM 4FT
OM3
HF OM3 S24 W RR NM 4FT
HF OM3 S20 W RR NM 4FT
HF OM3 S16 W RR NM 4FT
HF OM3 S12 W RR NM 4FT
HF OM3 S8 W RR NM 4FT
HF OM3 S4 W RR NM 4FT
OM4
HF OM4 S24 W RR NM 4FT
HF OM4 S20 W RR NM 4FT
HF OM4 S16 W RR NM 4FT
HF OM4 S12 W RR NM 4FT
HF OM4 S8 W RR NM 4FT
HF OM4 S4 W RR NM 4FT
OS1/OS2
HF 008 S24 W RR NM 4FT
HF 008 S20 W RR NM 4FT
HF 008 S16 W RR NM 4FT
HF 008 S12 W RR NM 4FT
HF 008 S8 W RR NM 4FT
HF 008 S4 W RR NM 4FT
Product Part Numbering - MRE 01 - External
Tested in accordance with IEC 60794-1-2 unless stated
Glass Yarn Armouring for Rodent Resistance
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
2.10mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For applications where protection from rodent
attack is required and a higher tensile load
is required, exists the universal MRR product
range offers rodent protection in the form
of glass roving armour which deters rodents
from chewing on optical cables. The product
range consists of multiple 2.10mm loose tubes
containing up to 4 fibres and solid fillers where
required, stranded around a rigid glass non
metallic central strength member. A layer
of water blocking tape provides interstitial
water blocking.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
LSHF or PE Sheath
Gel Filled
Loose Tube
Rodent Resistant
Glass Yarn Armouring
Individual Coloured Fibres
Rigid Glass Central Strength Member
Water Blocking Tape
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MRU only)
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
100
O62 050 OM3 OM4 BM3 BM4 008 108 208
G L A S S YA R N A R M O U R E D M U LT I L O O S E T U B E C A B L E
Brand-Rex Optical Cables - Universal MRU 02 and External MRE 02Glass Yarn Armoured Rodent Resistant Multi Loose Tube Cable
Product Part Numbering - MRU 02 - Universal
Glass Yarn Armouring for Rodent Resistance
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For applications where protection from rodent
attack and higher fibre counts are required, the
universal product range offers rodent protection
in the form of glass roving armour which deters
rodents from chewing on optical cables.
The product range consists of multiple 2.50mm
loose tubes containing up to 12 fibres and solid
fillers where required, stranded around a rigid
glass non metallic central strength member.
A layer of water blocking tape provides
interstitial water blocking.
LSHF or PE Sheath
Gel Filled
Loose Tube
Rodent Resistant
Glass Yarn Armouring
Individual Coloured Fibres
Rigid Glass Central Strength Member
Water Blocking Tape
Product Part Numbering - MRE 02 - External
Product Data
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MRU only)
72 Fibre
60 Fibre
48 Fibre
36 Fibre
24 Fibre
12 Fibre
HF 062 S72 W RR LU
HF 062 S60 W RR LU
HF 062 S48 W RR LU
HF 062 S36 W RR LU
HF 062 S24 W RR LU
HF 062 S12 W RR LU
62.5/125 50/125
HF 050 S72 W RR LU
HF 050 S60 W RR LU
HF 050 S48 W RR LU
HF 050 S36 W RR LU
HF 050 S24 W RR LU
HF 050 S12 W RR LU
OM3
HF OM3 S72 W RR LU
HF OM3 S60 W RR LU
HF OM3 S48 W RR LU
HF OM3 S36 W RR LU
HF OM3 S24 W RR LU
HF OM3 S12 W RR LU
OM4
HF OM4 S72 W RR LU
HF OM4 S60 W RR LU
HF OM4 S48 W RR LU
HF OM4 S36 W RR LU
HF OM4 S24 W RR LU
HF OM4 S12 W RR LU
OS1/OS2
HF 008 S72 W RR LU
HF 008 S60 W RR LU
HF 008 S48 W RR LU
HF 008 S36 W RR LU
HF 008 S24 W RR LU
HF 008 S12 W RR LU
12.2 171/137 5500 122 18312 - 72 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
Tested in accordance with IEC 60794-1-2 unless stated
72 Fibre
60 Fibre
48 Fibre
36 Fibre
24 Fibre
12 Fibre
HF 062 S72 W RR NM
HF 062 S60 W RR NM
HF 062 S48 W RR NM
HF 062 S36 W RR NM
HF 062 S24 W RR NM
HF 062 S12 W RR NM
62.5/125 50/125
HF 050 S72 W RR NM
HF 050 S60 W RR NM
HF 050 S48 W RR NM
HF 050 S36 W RR NM
HF 050 S24 W RR NM
HF 050 S12 W RR NM
OM3
HF OM3 S72 W RR NM
HF OM3 S60 W RR NM
HF OM3 S48 W RR NM
HF OM3 S36 W RR NM
HF OM3 S24 W RR NM
HF OM3 S12 W RR NM
OM4
HF OM4 S72 W RR NM
HF OM4 S60 W RR NM
HF OM4 S48 W RR NM
HF OM4 S36 W RR NM
HF OM4 S24 W RR NM
HF OM4 S12 W RR NM
OS1/OS2
HF 008 S72 W RR NM
HF 008 S60 W RR NM
HF 008 S48 W RR NM
HF 008 S36 W RR NM
HF 008 S24 W RR NM
HF 008 S12 W RR NM
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
101
O62 050 OM3 OM4 BM3 BM4 008 108 208
G L A S S YA R N A R M O U R E D M U LT I L O O S E T U B E C A B L E
Brand-Rex Optical Cables - Universal MRU 04 and External MRE 04Glass Yarn Armoured Rodent Resistant Multi Loose Tube Cable
Glass Yarn Armouring for Rodent Resistance
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For applications where protection from rodent
attack and higher fibre counts are required,
the universal product range offers rodent
protection in the form of glass roving armour
which deters rodents from chewing on optical
cables. The product range consists of multiple
2.50mm loose tubes containing up to 12 fibres
and solid fillers where required, stranded around
a rigid glass non metallic central strength
member. A layer of water blocking tape
provides interstitial water blocking.
LSHF or PE Sheath
Gel Filled
Loose Tube
Rodent Resistant
Glass Yarn Armouring
Individual Coloured Fibres
Rigid Glass Central Strength Member
Water Blocking Tape
Product Data
Product Part Numbering - MRU 04 - Universal
Product Part Numbering - MRE 04 - External
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MRU only)
13.5 200/164 5500 135 19884 - 96 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
84 Fibre
62.5/125
HF 062 S84 W RR LU
HF 062 S96 W RR LU96 Fibre
50/125
HF 050 S84 W RR LU
HF 050 S96 W RR LU
OM3
HF OM3 S84 W RR LU
HF OM3 S96 W RR LU
OM4
HF OM4 S84 W RR LU
HF OM4 S96 W RR LU
OS1/OS2
HF 008 S84 W RR LU
HF 008 S96 W RR LU
84 Fibre
96 Fibre
62.5/125
HF 062 S84 W RR NM
HF 062 S96 W RR NM
50/125
HF 050 S84 W RR NM
HF 050 S96 W RR NM
OM3
HF OM3 S84 W RR NM
HF OM3 S96 W RR NM
OM4
HF OM4 S84 W RR NM
HF OM4 S96 W RR NM
OS1/OS2
HF 008 S84 W RR NM
HF 008 S96 W RR NM
Tested in accordance with IEC 60794-1-2 unless stated
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
102
O62 050 OM3 OM4 BM3 BM4 008 108 208
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MRU only)
Brand-Rex Optical Cables - Universal MRU 03 and External MRE 03Glass Yarn Armoured Rodent Resistant Multi Loose Tube Cable
Product Part Numbering - MRU 03 - Universal
Glass Yarn Armouring for Rodent Resistance
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
12 x 12 Fibres Per Tube Offering up to 144 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For applications where protection from rodent
attack and higher fibre counts are required,
the universal product range offers rodent
protection in the form of glass roving armour
that deters rodents from chewing on optical
cables. The product range consists of multiple
2.50mm loose tubes containing up to 12 fibres
and solid fillers where required, stranded around
a sheathed rigid glass non metallic central
strength member. A layer of water blocking
tape provides interstitial water blocking.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
LSHF or PE Sheath
Gel Filled
Loose Tube
Rodent Resistant
Glass Yarn Armouring
Individual Coloured Fibres
Central Strength Member Sheath
Rigid Glass Central Strength Member
Water Blocking Tape
G L A S S YA R N A R M O U R E D M U LT I L O O S E T U B E C A B L E
Product Data
16.7 279/230 6000 167 251108 - 144 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
62.5/125
HF 062 S144 W RR LU
HF 062 S132 W RR LU
HF 062 S120 W RR LU
HF 062 S108 W RR LU
144 Fibre
132 Fibre
120 Fibre
108 Fibre
50/125
HF 050 S144 W RR LU
HF 050 S132 W RR LU
HF 050 S120 W RR LU
HF 050 S108 W RR LU
OM3
HF OM3 S144 W RR LU
HF OM3 S132 W RR LU
HF OM3 S120 W RR LU
HF OM3 S108 W RR LU
OM4
HF OM4 S144 W RR LU
HF OM4 S132 W RR LU
HF OM4 S120 W RR LU
HF OM4 S108 W RR LU
OS1/OS2
HF 008 S144 W RR LU
HF 008 S132 W RR LU
HF 008 S120 W RR LU
HF 008 S108 W RR LU
144 Fibre
132 Fibre
120 Fibre
108 Fibre
HF 062 S144 W RR NM
HF 062 S132 W RR NM
HF 062 S120 W RR NM
HF 062 S108 W RR NM
62.5/125 50/125
HF 050 S144 W RR NM
HF 050 S132 W RR NM
HF 050 S120 W RR NM
HF 050 S108 W RR NM
OM3
HF OM3 S144 W RR NM
HF OM3 S132 W RR NM
HF OM3 S120 W RR NM
HF OM3 S108 W RR NM
OM4
HF OM4 S144 W RR NM
HF OM4 S132 W RR NM
HF OM4 S120 W RR NM
HF OM4 S108 W RR NM
OS1/OS2
HF 008 S144 W RR NM
HF 008 S132 W RR NM
HF 008 S120 W RR NM
HF 008 S108 W RR NM
Product Part Numbering - MRE 03 - External
Tested in accordance with IEC 60794-1-2 unless stated
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
103
O62 050 OM3 OM4 BM3 BM4 008 108 208
Brand-Rex Optical Cables - Universal MRU 05 and External MRE 05Glass Yarn Armoured Rodent Resistant Multi Loose Tube Cable
Glass Yarn Armouring for Rodent Resistance
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
18 x 12 Fibres Per Tube Offering up to 216 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For applications where protection from rodent
attack and higher fibre counts are required,
the universal product range offers rodent
protection in the form of glass roving armour
that deters rodents from chewing on optical
cables. The product range consists of multiple
2.50mm loose tubes containing up to 12 fibres
and solid fillers where required, stranded around
a sheathed rigid glass non metallic central
strength member. A layer of water blocking
tape provides interstitial water blocking.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
G L A S S YA R N A R M O U R E D M U LT I L O O S E T U B E C A B L E
Product Data
PRODUCT PERFORMANCE
Crush (N):
2000
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MRU only)
LSHF or PE Sheath
Gel Filled
Loose Tube
Rodent Resistant
Glass Yarn Armouring
Individual Coloured Fibres
Rigid Glass Central Strength Member
Water Blocking Tape17.2 294/250 5500 172 258156 - 216 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
Tested in accordance with IEC 60794-1-2 unless stated
192 Fibre
180 Fibre
168 Fibre
156 Fibre
Product Part Numbering - MRU 05 - Universal
216 Fibre
204 Fibre
HF 062 S192 W RR LU
HF 062 S180 W RR LU
HF 062 S168 W RR LU
HF 062 S156 W RR LU
62.5/125
HF 062 S204 W RR LU
HF 062 S216 W RR LU
50/125
HF 050 S192 W RR LU
HF 050 S180 W RR LU
HF 050 S168 W RR LU
HF 050 S156 W RR LU
HF 050 S204 W RR LU
HF 050 S216 W RR LU
OM3
HF OM3 S192 W RR LU
HF OM3 S180 W RR LU
HF OM3 S168 W RR LU
HF OM3 S156 W RR LU
HF OM3 S204 W RR LU
HF OM3 S216 W RR LU
OM4
HF OM4 S192 W RR LU
HF OM4 S180 W RR LU
HF OM4 S168 W RR LU
HF OM4 S156 W RR LU
HF OM4 S204 W RR LU
HF OM4 S216 W RR LU
OS1/OS2
HF 008 S192 W RR LU
HF 008 S180 W RR LU
HF 008 S168 W RR LU
HF 008 S156 W RR LU
HF 008 S204 W RR LU
HF 008 S216 W RR LU
192 Fibre
180 Fibre
168 Fibre
156 Fibre
Product Part Numbering - MRE 05 - External
216 Fibre
204 Fibre
HF 062 S192 W RR NM
HF 062 S180 W RR NM
HF 062 S168 W RR NM
HF 062 S156 W RR NM
62.5/125
HF 062 S204 W RR NM
HF 062 S216 W RR NM
50/125
HF 050 S192 W RR NM
HF 050 S180 W RR NM
HF 050 S168 W RR NM
HF 050 S156 W RR NM
HF 050 S204 W RR NM
HF 050 S216 W RR NM
OM3
HF OM3 S192 W RR NM
HF OM3 S180 W RR NM
HF OM3 S168 W RR NM
HF OM3 S156 W RR NM
HF OM3 S204 W RR NM
HF OM3 S216 W RR NM
OM4
HF OM4 S192 W RR NM
HF OM4 S180 W RR NM
HF OM4 S168 W RR NM
HF OM4 S156 W RR NM
HF OM4 S204 W RR NM
HF OM4 S216 W RR NM
OS1/OS2
HF 008 S192 W RR NM
HF 008 S180 W RR NM
HF 008 S168 W RR NM
HF 008 S156 W RR NM
HF 008 S204 W RR NM
HF 008 S216 W RR NM
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
104
O62 050 OM3 OM4 BM3 BM4 008 108 208 Tested in accordance with IEC 60794-1-2 unless stated
Corrugated Steel Tape Armour
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
6 x 4 Fibres Per Tube Offering up to 24 Fibres
2.10mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For applications where a higher tensile load
is required versus that offered by unitube
constructions, this product range offers a
compact low fibre count direct burial grade cable.
The product range consists of multiple 2.10mm
loose tubes containing up to 4 fibres and solid
fillers where required, stranded around a rigid
glass non metallic central strength member.
A layer of water blocking tape provides interstitial
water blocking and a layer of corrugated steel
tape armour provides additional crush resistance.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
PRODUCT PERFORMANCE
Crush (N):
4000
Impact (Nm):
10
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MSU only)
Brand-Rex Optical Cables - Universal MSU 01 and External MSE 01Direct Burial Steel Tape Armoured Multi Loose Tube Cable
Product Part Numbering - MSU 01 - Universal
S T E E L TA P E A R M O U R E D M U LT I L O O S E T U B E C A B L E
Product Data
12.20 190 / 153 1500 122 1834 - 24 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
24 Fibre
20 Fibre
16 Fibre
12 Fibre
8 Fibre
4 Fibre
HF 062 S24 W STA LU 4FT
HF 062 S20 W STA LU 4FT
HF 062 S16 W STA LU 4FT
HF 062 S12 W STA LU 4FT
HF 062 S8 W STA LU 4FT
HF 062 S4 W STA LU 4FT
62.5/125 50/125
HF 050 S24 W STA LU 4FT
HF 050 S20 W STA LU 4FT
HF 050 S16 W STA LU 4FT
HF 050 S12 W STA LU 4FT
HF 050 S8 W STA LU 4FT
HF 050 S4 W STA LU 4FT
OM3
HF OM3 S24 W STA LU 4FT
HF OM3 S20 W STA LU 4FT
HF OM3 S16 W STA LU 4FT
HF OM3 S12 W STA LU 4FT
HF OM3 S8 W STA LU 4FT
HF OM3 S4 W STA LU 4FT
OM4
HF OM4 S24 W STA LU 4FT
HF OM4 S20 W STA LU 4FT
HF OM4 S16 W STA LU 4FT
HF OM4 S12 W STA LU 4FT
HF OM4 S8 W STA LU 4FT
HF OM4 S4 W STA LU 4FT
OS1/OS2
HF 008 S24 W STA LU 4FT
HF 008 S20 W STA LU 4FT
HF 008 S16 W STA LU 4FT
HF 008 S12 W STA LU 4FT
HF 008 S8 W STA LU 4FT
HF 008 S4 W STA LU 4FT
24 Fibre
20 Fibre
16 Fibre
12 Fibre
8 Fibre
4 Fibre
HF 062 S24 W STA NM 4FT
HF 062 S20 W STA NM 4FT
HF 062 S16 W STA NM 4FT
HF 062 S12 W STA NM 4FT
HF 062 S8 W STA NM 4FT
HF 062 S4 W STA NM 4FT
62.5/125 50/125
HF 050 S24 W STA NM 4FT
HF 050 S20 W STA NM 4FT
HF 050 S16 W STA NM 4FT
HF 050 S12 W STA NM 4FT
HF 050 S8 W STA NM 4FT
HF 050 S4 W STA NM 4FT
OM3
HF OM3 S24 W STA NM 4FT
HF OM3 S20 W STA NM 4FT
HF OM3 S16 W STA NM 4FT
HF OM3 S12 W STA NM 4FT
HF OM3 S8 W STA NM 4FT
HF OM3 S4 W STA NM 4FT
OM4
HF OM4 S24 W STA NM 4FT
HF OM4 S20 W STA NM 4FT
HF OM4 S16 W STA NM 4FT
HF OM4 S12 W STA NM 4FT
HF OM4 S8 W STA NM 4FT
HF OM4 S4 W STA NM 4FT
OS1/OS2
HF 008 S24 W STA NM 4FT
HF 008 S20 W STA NM 4FT
HF 008 S16 W STA NM 4FT
HF 008 S12 W STA NM 4FT
HF 008 S8 W STA NM 4FT
HF 008 S4 W STA NM 4FT
Product Part Numbering - MSE 01 - External
LSHF or PE Sheath
Gel Filled
Loose Tube
Corrugated Steel
Tape Armour
Individual Coloured Fibres
Rigid Glass Central Strength Member
Water Blocking Tape
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
105
O62 050 OM3 OM4 BM3 BM4 008 108 208
72 Fibre
60 Fibre
48 Fibre
36 Fibre
24 Fibre
12 Fibre
HF 062 S72 W STA NM
HF 062 S60 W STA NM
HF 062 S48 W STA NM
HF 062 S36 W STA NM
HF 062 S24 W STA NM
HF 062 S12 W STA NM
62.5/125 50/125
HF 050 S72 W STA NM
HF 050 S60 W STA NM
HF 050 S48 W STA NM
HF 050 S36 W STA NM
HF 050 S24 W STA NM
HF 050 S12 W STA NM
OM3
HF OM3 S72 W STA NM
HF OM3 S60 W STA NM
HF OM3 S48 W STA NM
HF OM3 S36 W STA NM
HF OM3 S24 W STA NM
HF OM3 S12 W STA NM
OM4
HF OM4 S72 W STA NM
HF OM4 S60 W STA NM
HF OM4 S48 W STA NM
HF OM4 S36 W STA NM
HF OM4 S24 W STA NM
HF OM4 S12 W STA NM
OS1/OS2
HF 008 S72 W STA NM
HF 008 S60 W STA NM
HF 008 S48 W STA NM
HF 008 S36 W STA NM
HF 008 S24 W STA NM
HF 008 S12 W STA NM
Product Part Numbering - MSE 02 - External
Brand-Rex Optical Cables - Universal MSU 02 and MSE 02Direct Burial Steel Tape Armoured Multi Loose Tube Cable
72 Fibre
60 Fibre
48 Fibre
36 Fibre
24 Fibre
12 Fibre
HF 062 S72 W STA LU
HF 062 S60 W STA LU
HF 062 S48 W STA LU
HF 062 S36 W STA LU
HF 062 S24 W STA LU
HF 062 S12 W STA LU
62.5/125 50/125
HF 050 S72 W STA LU
HF 050 S60 W STA LU
HF 050 S48 W STA LU
HF 050 S36 W STA LU
HF 050 S24 W STA LU
HF 050 S12 W STA LU
OM3
HF OM3 S72 W STA LU
HF OM3 S60 W STA LU
HF OM3 S48 W STA LU
HF OM3 S36 W STA LU
HF OM3 S24 W STA LU
HF OM3 S12 W STA LU
OM4
HF OM4 S72 W STA LU
HF OM4 S60 W STA LU
HF OM4 S48 W STA LU
HF OM4 S36 W STA LU
HF OM4 S24 W STA LU
HF OM4 S12 W STA LU
OS1/OS2
HF 008 S72 W STA LU
HF 008 S60 W STA LU
HF 008 S48 W STA LU
HF 008 S36 W STA LU
HF 008 S24 W STA LU
HF 008 S12 W STA LU
Product Part Numbering - MSU 02 - Universal
Corrugated Steel Tape Armour
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
6 x 12 Fibres Per Tube Offering up to 72 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For direct burial applications, the single sheathed
product range offers up to 72 fibres in a compact
and relatively flexible construction. The product
range consists of multiple 2.50mm loose tubes
containing up to 12 fibres and solid fillers where
required, stranded around a rigid glass non
metallic central strength member. A layer of
water blocking tape provides interstitial water
blocking and a layer of steel tape armour provides
additional crush resistance.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
LSHF or PE Sheath
Gel Filled
Loose Tube
Corrugated Steel
Tape Armour
Individual Coloured Fibres
Rigid Glass Central Strength Member
Water Blocking Tape
S T E E L TA P E A R M O U R E D M U LT I L O O S E T U B E C A B L E
Product Data
13.40 227/185 2000 134 20112 - 72 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
PRODUCT PERFORMANCE
Crush (N):
4000
Impact (Nm):
10
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MSU only)
Tested in accordance with IEC 60794-1-2 unless stated
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
106
O62 050 OM3 OM4 BM3 BM4 008 108 208
LSHF or PE Sheath
Gel Filled
Loose Tube
Corrugated Steel
Tape Armour
Individual Coloured Fibres
Rigid Glass Central Strength Member
Water Blocking Tape
Brand-Rex Optical Cables - Universal MSU 04 and MSE 04Direct Burial Steel Tape Armoured Multi Loose Tube Cable
Corrugated Steel Tape Armour
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
8 x 12 Fibres Per Tube Offering up to 96 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For direct burial applications, the single sheathed
product range offers up to 96 fibres in a compact
and relatively flexible construction. The product
range consists of multiple 2.50mm loose tubes
containing up to 12 fibres and solid fillers where
required, stranded around a rigid glass non
metallic central strength member. A layer of
water blocking tape provides interstitial water
blocking and a layer of steel tape armour provides
additional crush resistance.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
S T E E L TA P E A R M O U R E D M U LT I L O O S E T U B E C A B L E
Product Data
PRODUCT PERFORMANCE
Crush (N):
4000
Impact (Nm):
10
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MSU only)
14.70 258/210 3000 147 22084-96 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
Product Part Numbering - MSU 04 - Universal
84 Fibre
96 Fibre
62.5/125
HF 062 S84 W STA LU
HF 062 S96 W STA LU
50/125
HF 050 S84 W STA LU
HF 050 S96 W STA LU
OM3
HF OM3 S84 W STA LU
HF OM3 S96 W STA LU
OM4
HF OM4 S84 W STA LU
HF OM4 S96 W STA LU
OS1/OS2
HF 008 S84 W STA LU
HF 008 S96 W STA LU
Tested in accordance with IEC 60794-1-2 unless stated
Product Part Numbering - MSE 04 - External
62.5/125
HF 062 S96 W STA NM
HF 062 S84 W STA NM
96 Fibre
84 Fibre
50/125
HF 050 S96 W STA NM
HF 050 S84 W STA NM
OM3
HF OM3 S96 W STA NM
HF OM3 S84 W STA NM
OM4
HF OM4 S96 W STA NM
HF OM4 S84 W STA NM
OS1/OS2
HF 008 S96 W STA NM
HF 008 S84 W STA NM
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
107
O62 050 OM3 OM4 BM3 BM4 008 108 208
Brand-Rex Optical Cables - Universal MSU 03 and External MSE 03Direct Burial Steel Tape Armoured Multi Loose Tube cable
Corrugated Steel Tape Armour
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
12 x 12 Fibres Per Tube Offering up to 144 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For direct burial applications, the single sheathed
product range offers up to 144 fibres in a compact
and relatively flexible construction.
The product range consists of multiple 2.50mm
loose tubes containing up to 12 fibres and solid
fillers where required, stranded around a sheathed
rigid glass non metallic central strength member.
A layer of water blocking tape provides interstitial
water blocking and a layer of corrugated steel
tape armour gives additional crush resistance.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
LSHF or PE Sheath
Gel Filled
Loose Tube
Corrugated Steel
Tape Armour
Individual Coloured Fibres
Central Strength Member Sheath
Rigid Glass Central Strength Member
Water Blocking Tape
S T E E L TA P E A R M O U R E D M U LT I L O O S E T U B E C A B L E
Product Data
PRODUCT PERFORMANCE
Crush (N):
4000
Impact (Nm):
10
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MSU only)
18.20 327/313 2000 182 273108 - 144 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
144 Fibre
132 Fibre
120 Fibre
108 Fibre
HF 062 S144 W STA LU
HF 062 S132 W STA LU
HF 062 S120 W STA LU
HF 062 S108 W STA LU
62.5/125 50/125
HF 050 S144 W STA LU
HF 050 S132 W STA LU
HF 050 S120 W STA LU
HF 050 S108 W STA LU
OM3
HF OM3 S144 W STA LU
HF OM3 S132 W STA LU
HF OM3 S120 W STA LU
HF OM3 S108 W STA LU
OM4
HF OM4 S144 W STA LU
HF OM4 S132 W STA LU
HF OM4 S120 W STA LU
HF OM4 S108 W STA LU
Product Part Numbering - MSU 03 - Universal
144 Fibre
132 Fibre
120 Fibre
108 Fibre
HF 062 S144 W STA NM
HF 062 S132 W STA NM
HF 062 S120 W STA NM
HF 062 S108 W STA NM
62.5/125 50/125
HF 050 S144 W STA NM
HF 050 S132 W STA NM
HF 050 S120 W STA NM
HF 050 S108 W STA NM
OM3
HF OM3 S144 W STA NM
HF OM3 S132 W STA NM
HF OM3 S120 W STA NM
HF OM3 S108 W STA NM
OM4
HF OM4 S144 W STA NM
HF OM4 S132 W STA NM
HF OM4 S120 W STA NM
HF OM4 S108 W STA NM
Product Part Numbering - MSE 03 - External
Tested in accordance with IEC 60794-1-2 unless stated
HF 008 144 W STA LU
HF 008 S132 W STA LU
HF 008 S120 W STA LU
HF 008 S108 W STA LU
OS1/OS2
HF 008 144 W STA NM
HF 008 S132 W STA NM
HF 008 S120 W STA NM
HF 008 S108 W STA NM
OS1/OS2
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
108
O62 050 OM3 OM4 BM3 BM4 008 108 208
Brand-Rex Optical Cables - Universal MSU 05 and External MSE 05Direct Burial Steel Tape Armoured Multi Loose Tube cable
Corrugated Steel Tape Armour
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
18 x 12 Fibres Per Tube Offering up to 216 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For direct burial applications, the single sheathed
product range offers up to 216 fibres in a compact
and relatively flexible construction. The product
range consists of multiple 2.50mm loose tubes
containing up to 12 fibres and solid fillers where
required, stranded around a sheathed rigid glass
non metallic central strength member. A layer
of water blocking tape provides interstitial water
blocking and a layer of corrugated steel tape
armour gives additional crush resistance.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
LSHF or PE Sheath
Gel Filled
Loose Tube
Corrugated Steel
Tape Armour
Individual Coloured Fibres
Rigid Glass Central Strength Member
Water Blocking Tape
S T E E L TA P E A R M O U R E D M U LT I L O O S E T U B E C A B L E
19.00 352/303 2000 190 285156-216 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
192 Fibre
180 Fibre
168 Fibre
156 Fibre
Product Part Numbering - MSU 05 - Universal
216 Fibre
204 Fibre
62.5/125
HF 062 S192 W STA LU
HF 062 S180 W STA LU
HF 062 S168 W STA LU
HF 062 S156 W STA LU
HF 062 S216 W STA LU
HF 062 S204 W STA LU
50/125
HF 050 S192 W STA LU
HF 050 S180 W STA LU
HF 050 S168 W STA LU
HF 050 S156 W STA LU
HF 050 S216 W STA LU
HF 050 S204 W STA LU
OM3
HF OM3 S192 W STA LU
HF OM3 S180 W STA LU
HF OM3 S168 W STA LU
HF OM3 S156 W STA LU
HF OM3 S216 W STA LU
HF OM3 S204 W STA LU
OM4
HF OM4 S192 W STA LU
HF OM4 S180 W STA LU
HF OM4 S168 W STA LU
HF OM4 S156 W STA LU
HF OM4 S216 W STA LU
HF OM4 S204 W STA LU
OS1/OS2
HF 008 S192 W STA LU
HF 008 S180 W STA LU
HF 008 S168 W STA LU
HF 008 S156 W STA LU
HF 008 S216 W STA LU
HF 008 S204 W STA LU
PRODUCT PERFORMANCE
Crush (N):
4000
Impact (Nm):
10
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MSU only)
Product Data
192 Fibre
180 Fibre
168 Fibre
156 Fibre
216 Fibre
204 Fibre
Product Part Numbering - MSE 05 - External
HF 062 S192 W STA NM
HF 062 S180 W STA NM
HF 062 S168 W STA NM
HF 062 S156 W STA NM
62.5/125
HF 062 S216 W STA NM
HF 062 S204 W STA NM
50/125
HF 050 S192 W STA NM
HF 050 S180 W STA NM
HF 050 S168 W STA NM
HF 050 S156 W STA NM
HF 050 S216 W STA NM
HF 050 S204 W STA NM
OM3
HF OM3 S192 W STA NM
HF OM3 S180 W STA NM
HF OM3 S168 W STA NM
HF OM3 S156 W STA NM
HF OM3 S216 W STA NM
HF OM3 S204 W STA NM
OM4
HF OM4 S192 W STA NM
HF OM4 S180 W STA NM
HF OM4 S168 W STA NM
HF OM4 S156 W STA NM
HF OM4 S216 W STA NM
HF OM4 S204 W STA NM
OS1/OS2
HF 008 S192 W STA NM
HF 008 S180 W STA NM
HF 008 S168 W STA NM
HF 008 S156 W STA NM
HF 008 S216 W STA NM
HF 008 S204 W STA NM
Tested in accordance with IEC 60794-1-2 unless stated
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
109
O62 050 OM3 OM4 BM3 BM4 008 108 208
PRODUCT PERFORMANCE
Crush (N):
4000
Impact (Nm):
10
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MSU2 only)
Brand-Rex Optical Cables - Universal MTU 01 and External MTE 01Burial Steel Tape Armoured Multi Loose Tube Cable
Product Part Numbering - MTU 01 - Universal
Corrugated Steel Tape Armour
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
6 x 4 Fibres Per Tube Offering up to 24 Fibres
2.10mm Gel filled Loose Tube
PRODUCT DESCRIPTION
For applications where a higher tensile load
is required versus that offered by unitube
constructions, the universal product range offers
a compact low fibre count direct burial grade
cable. The product range consists of multiple
2.10mm loose tubes containing up to 4 fibres
and solid fillers where required, stranded around
a rigid glass non metallic central strength member.
A layer of water blocking tape provides interstitial
water blocking and the LSHF or PE inner sheath
and a layer of corrugated steel tape armour
provide additional crush resistance.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
LSHF or PE Outer Sheath
LSHF or PE Inner Sheath
Gel Filled
Loose Tube
Corrugated Steel
Tape Armour
Individual Coloured Fibres
Rigid Glass Central Strength Member
Water Blocking Tape
Product Part Numbering - MTE 01 - External
S T E E L TA P E A R M O U R E D M U LT I L O O S E T U B E C A B L E
Product Data
24 Fibre
20 Fibre
16 Fibre
12 Fibre
8 Fibre
4 Fibre
HF 062 S24 W L STA LU 4FT
HF 062 S20 W L STA LU 4FT
HF 062 S16 W L STA LU 4FT
HF 062 S12 W L STA LU 4FT
HF 062 S8 W L STA LU 4FT
HF 062 S4 W L STA LU 4FT
62.5/125 50/125
HF 050 S24 W L STA LU 4FT
HF 050 S20 W L STA LU 4FT
HF 050 S16 W L STA LU 4FT
HF 050 S12 W L STA LU 4FT
HF 050 S8 W L STA LU 4FT
HF 050 S4 W L STA LU 4FT
OM3
HF OM3 S24 W L STA LU 4FT
HF OM3 S20 W L STA LU 4FT
HF OM3 S16 W L STA LU 4FT
HF OM3 S12 W L STA LU 4FT
HF OM3 S8 W L STA LU 4FT
HF OM3 S4 W L STA LU 4FT
OM4
HF OM4 S24 W L STA LU 4FT
HF OM4 S20 W L STA LU 4FT
HF OM4 S16 W L STA LU 4FT
HF OM4 S12 W L STA LU 4FT
HF OM4 S8 W L STA LU 4FT
HF OM4 S4 W L STA LU 4FT
OS1/OS2
HF 008 S24 W L STA LU 4FT
HF 008 S20 W L STA LU 4FT
HF 008 S16 W L STA LU 4FT
HF 008 S12 W L STA LU 4FT
HF 008 S8 W L STA LU 4FT
HF 008 S4 W L STA LU 4FT
14.10 247/198 1500 145 2154 - 24 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
62.5/125
HF 062 S16 W NM STA NM 4FT
HF 062 S12 W NM STA NM 4FT
HF 062 S24 W NM STA NM 4FT
HF 062 S20 W NM STA NM 4FT
HF 062 S8 W NM STA NM 4FT
HF 062 S4 W NM STA NM 4FT
24 Fibre
20 Fibre
16 Fibre
12 Fibre
8 Fibre
4 Fibre
50/125
HF 050 S24 W NM STA NM 4FT
HF 050 S20 W NM STA NM 4FT
HF 050 S16 W NM STA NM 4FT
HF 050 S12 W NM STA NM 4FT
HF 050 S8 W NM STA NM 4FT
HF 050 S4 W NM STA NM 4FT
OM3
HF OM3 S24 W NM STA NM 4FT
HF OM3 S20 W NM STA NM 4FT
HF OM3 S16 W NM STA NM 4FT
HF OM3 S12 W NM STA NM 4FT
HF OM3 S8 W NM STA NM 4FT
HF OM3 S4 W NM STA NM 4FT
OM4
HF OM4 S24 W NM STA NM 4FT
HF OM4 S20 W NM STA NM 4FT
HF OM4 S16 W NM STA NM 4FT
HF OM4 S12 W NM STA NM 4FT
HF OM4 S8 W NM STA NM 4FT
HF OM4 S4 W NM STA NM 4FT
OS1/OS2
HF 008 S24 W NM STA NM 4FT
HF 008 S20 W NM STA NM 4FT
HF 008 S16 W NM STA NM 4FT
HF 008 S12 W NM STA NM 4FT
HF 008 S8 W NM STA NM 4FT
HF 008 S4 W NM STA NM 4FT
Tested in accordance with IEC 60794-1-2 unless stated
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
110
O62 050 OM3 OM4 BM3 BM4 008 108 208
Brand-Rex Optical Cables - Universal MTU 02 and External MTE 02Universal Direct Burial Steel Tape Armoured Multi Loose Tube Cable
Product Part Numbering - MTU 02 - Universal
Product Part Numbering - MTE 02 - External
S T E E L TA P E A R M O U R E D M U LT I L O O S E T U B E C A B L E
Product Data
15.30 284/231 2000 153 23012 - 72 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
72 Fibre
60 Fibre
48 Fibre
36 Fibre
24 Fibre
12 Fibre
HF 062 S72 W L STA LU
HF 062 S60 W L STA LU
HF 062 S48 W L STA LU
HF 062 S36 W L STA LU
HF 062 S24 W L STA LU
HF 062 S12 W L STA LU
62.5/125 50/125
HF 050 S72 W L STA LU
HF 050 S60 W L STA LU
HF 050 S48 W L STA LU
HF 050 S36 W L STA LU
HF 050 S24 W L STA LU
HF 050 S12 W L STA LU
OM3
HF OM3 S72 W L STA LU
HF OM3 S60 W L STA LU
HF OM3 S48 W L STA LU
HF OM3 S36 W L STA LU
HF OM3 S24 W L STA LU
HF OM3 S12 W L STA LU
OM4
HF OM4 S72 W L STA LU
HF OM4 S60 W L STA LU
HF OM4 S48 W L STA LU
HF OM4 S36 W L STA LU
HF OM4 S24 W L STA LU
HF OM4 S12 W L STA LU
OS1/OS2
HF 008 S72 W L STA LU
HF 008 S60 W L STA LU
HF 008 S48 W L STA LU
HF 008 S36 W L STA LU
HF 008 S24 W L STA LU
HF 008 S12 W L STA LU
72 Fibre
60 Fibre
48 Fibre
36 Fibre
24 Fibre
12 Fibre
HF 062 S72 WNM STA NM
HF 062 S60 WNM STA NM
HF 062 S48 WNM STA NM
HF 062 S36 WNM STA NM
HF 062 S24 WNM STA NM
HF 062 S12 WNM STA NM
62.5/125 50/125
HF 050 S72 WNM STA NM
HF 050 S60 WNM STA NM
HF 050 S48 WNM STA NM
HF 050 S36 WNM STA NM
HF 050 S24 WNM STA NM
HF 050 S12 WNM STA NM
OM3
HF OM3 S72 WNM STA NM
HF OM3 S60 WNM STA NM
HF OM3 S48 WNM STA NM
HF OM3 S36 WNM STA NM
HF OM3 S24 WNM STA NM
HF OM3 S12 WNM STA NM
OM4
HF OM4 S72 WNM STA NM
HF OM4 S60 WNM STA NM
HF OM4 S48 WNM STA NM
HF OM4 S36 WNM STA NM
HF OM4 S24 WNM STA NM
HF OM4 S12 WNM STA NM
OS1/OS2
HF 008 S72 WNM STA NM
HF 008 S60 WNM STA NM
HF 008 S48 WNM STA NM
HF 008 S36 WNM STA NM
HF 008 S24 WNM STA NM
HF 008 S12 WNM STA NM
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
PRODUCT PERFORMANCE
Crush (N):
4000
Impact (Nm):
10
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MSU2 only)
Tested in accordance with IEC 60794-1-2 unless stated
Corrugated Steel Tape Armour
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
6 x 12 Fibres Per Tube Offering up to 72 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For direct burial applications, the twin sheathed
product range offers up to 72 fibres in a compact
and relatively flexible construction. The product
range consists of multiple 2.50mm loose tubes
containing up to 12 fibres and solid fillers where
required, stranded around a rigid glass non
metallic central strength member. A layer of water
blocking tape provides interstitial water blocking
and a layer of corrugated steel tape armour gives
additional crush resistance.
LSHF or PE Outer Sheath
LSHF or PE Inner Sheath
Gel Filled
Loose Tube
Corrugated Steel
Tape Armour
Individual Coloured Fibres
Rigid Glass Central Strength Member
Water Blocking Tape
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
111
O62 050 OM3 OM4 BM3 BM4 008 108 208
Brand-Rex Optical Cables - Universal MTU 04 and External MTE 04Universal Direct Burial Steel Tape Armoured Multi Loose Tube Cable
Corrugated Steel Tape Armour
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
8 x 12 Fibres Per Tube Offeringup to 96 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For direct burial applications, the twin sheathed
product range offers up to 96 fibres in a compact
and relatively flexible construction. The product
range consists of multiple 2.50mm loose tubes
containing up to 12 fibres and solid fillers where
required, stranded around a rigid glass non
metallic central strength member. A layer of water
blocking tape provides interstitial water blocking
and a layer of corrugated steel tape armour gives
additional crush resistance.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
LSHF or PE Outer Sheath
LSHF or PE Inner Sheath
Gel Filled
Loose Tube
Corrugated Steel
Tape Armour
Individual Coloured Fibres
Rigid Glass Central Strength Member
Water Blocking Tape
S T E E L TA P E A R M O U R E D M U LT I L O O S E T U B E C A B L E
Product Data
16.7 330/260 3000 167 25084 - 96 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
PRODUCT PERFORMANCE
Crush (N):
4000
Impact (Nm):
10
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MTU only)
Product Part Numbering - MTU 04 - Universal
Product Part Numbering - MTE 04 - External
Tested in accordance with IEC 60794-1-2 unless stated
62.5/125
HF 062 S96 WNM STA NM
HF 062 S84 WNM STA NM
96 Fibre
84 Fibre
50/125
HF 050 S96 WNM STA NM
HF 050 S84 WNM STA NM
OM3
HF OM3 S96 WNM STA NM
HF OM3 S84 WNM STA NM
OM4
HF OM4 S96 WNM STA NM
HF OM4 S84 WNM STA NM
OS1/OS2
HF 008 S96 WNM STA NM
HF 008 S84 WNM STA NM
96 Fibre
84 Fibre
62.5/125
HF 062 S84 W L STA LU
HF 062 S96 W L STA LU
50/125
HF 050 S84 W L STA LU
HF 050 S96 W L STA LU
OM3
HF OM3 S84 W L STA LU
HF OM3 S96 W L STA LU
OM4
HF OM4 S84 W L STA LU
HF OM4 S96 W L STA LU
OS1/OS2
HF 008 S84 W L STA LU
HF 008 S96 W L STA LU
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
112
O62 050 OM3 OM4 BM3 BM4 008 108 208
Brand-Rex Optical Cables - Universal MTU 03 and External MTE 03Direct Burial Steel Tape Armoured Multi Loose Tube cable
Corrugated Steel Tape Armour
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
12 x 12 Fibres Per Tube Offering up to 144 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For direct burial applications, the twin
sheathed product range offers up to 144 fibres
in a compact and relatively flexible construction.
The range consists of multiple 2.50mm loose
tubes containing up to 12 fibres and solid fillers
where required, stranded around a sheathed rigid
glass non metallic central strength member.
A layer of water blocking tape provides interstitial
water blocking and a layer of corrugated steel
tape armour gives additional crush resistance.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
LSHF or PE Outer Sheath
LSHF or PE Inner Sheath
Gel Filled
Loose Tube
Corrugated Steel
Tape Armour
Individual Coloured Fibres
Central Strength Member Sheath
Rigid Glass Central Strength Member
Water Blocking Tape
S T E E L TA P E A R M O U R E D M U LT I L O O S E T U B E C A B L E
Tested in accordance with IEC 60794-1-2 unless stated
PRODUCT PERFORMANCE
Crush (N):
4000
Impact (Nm):
10
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MSU only)
144 Fibre
132 Fibre
120 Fibre
108 Fibre
HF 062 S144 W L STA LU
HF 062 S132 W L STA LU
HF 062 S120 W L STA LU
HF 062 S108 W L STA LU
62.5/125 50/125
HF 050 S144 W L STA LU
HF 050 S132 W L STA LU
HF 050 S120 W L STA LU
HF 050 S108 W L STA LU
OS1/OS2
HF 008 144 W L STA LU
HF 008 S132 W L STA LU
HF 008 S120 W L STA LU
HF 008 S108 W L STA LU
Product Part Numbering - MTU 03 - Universal
OM3
HF OM3 S144 W L STA LU
HF OM3 S132 W L STA LU
HF OM3 S108 W L STA LU
HF OM3 S120 W L STA LU
OM4
HF OM4 S144 W L STA LU
HF OM4 S132 W L STA LU
HF OM4 S108 W L STA LU
HF OM4 S120 W L STA LU
Product Data
20.00 445/355 2000 200 300108 - 144 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
144 Fibre
132 Fibre
120 Fibre
108 Fibre
HF 062 S144 W NM STA NM
HF 062 S132 W NM STA NM
HF 062 S120 W NM STA NM
HF 062 S108 W NM STA NM
62.5/125 50/125
HF 050 S144 W NM STA NM
HF 050 S132 W NM STA NM
HF 050 S120 W NM STA NM
HF 050 S108 W NM STA NM
OM3
HF OM3 S144 W NM STA NM
HF OM3 S132 W NM STA NM
HF OM3 S120 W NM STA NM
HF OM3 S108 W NM STA NM
OM4
HF OM4 S144 W NM STA NM
HF OM4 S132 W NM STA NM
HF OM4 S120 W NM STA NM
HF OM4 S108 W NM STA NM
OS1/OS2
HF 008 144 W NM STA NM
HF 008 S132 W NM STA NM
HF 008 S120 W NM STA NM
HF 008 S108 W NM STA NM
Product Part Numbering - MTE 03 - External
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
113
O62 050 OM3 OM4 BM3 BM4 008 108 208
Outer LSHF or PE Sheath
Inner LSHF or PE Sheath
Gel Filled
Loose Tube
Corrugated Steel
Tape Armour
Individual Coloured Fibres
Rigid Glass Central Strength Member
Water Blocking Tape
PRODUCT PERFORMANCE
Crush (N):
4000
Impact (Nm):
10
Torsion (turns / m):
5
Fire:
IEC 60332-1
(MSU only)
Brand-Rex Optical Cables - Universal MTU 05 and External MTE 05Direct Burial Steel Tape Armoured Multi Loose Tube cable
Corrugated Steel Tape Armour
Rigid Glass Central Strength Member
Choice of Universal or External Sheath
18 x 12 Fibres Per Tube Offering up to 216 Fibres
2.50mm Gel Filled Loose Tube
PRODUCT DESCRIPTION
For direct burial applications, the twin sheathed
product range offers up to 216 fibres in a compact
and relatively flexible construction. The range
consists of multiple 2.50mm loose tubes
containing up to 12 fibres and solid fillers where
required, stranded around a sheathed rigid glass
non metallic central strength member. A layer of
water blocking tape provides interstitial water
blocking and a layer of corrugated steel tape
armour gives additional crush resistance.
Temp - Operation:
-40°c to +70°c
Temp - Storage:
-40°c to +70°c
Temp - Installation:
-10°c to +70°c
Water Penetration:
<3m @ 24h
S T E E L TA P E A R M O U R E D M U LT I L O O S E T U B E C A B L E
Product Data
20.90 451/370 2000 209 314156-216 Fibre
Diameter
mm
Weight
(U)/(E)
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
Product Part Numbering - MTU 05 - Universal
Tested in accordance with IEC 60794-1-2 unless stated
192 Fibre
180 Fibre
168 Fibre
156 Fibre
216 Fibre
204 Fibre
62.5/125
HF 062 S192 W L STA LU
HF 062 S180 W L STA LU
HF 062 S168 W L STA LU
HF 062 S156 W L STA LU
HF 062 S216 W L STA LU
HF 062 S204 W L STA LU
50/125
HF 050 S192 W L STA LU
HF 050 S180 W L STA LU
HF 050 S168 W L STA LU
HF 050 S156 W L STA LU
HF 050 S216 W L STA LU
HF 050 S204 W L STA LU
OM3
HF OM3 S192 W L STA LU
HF OM3 S180 W L STA LU
HF OM3 S156 W L STA LU
HF OM3 S168 W L STA LU
HF OM3 S216 W L STA LU
HF OM3 S204 W L STA LU
OM4
HF OM4 S192 W L STA LU
HF OM4 S180 W L STA LU
HF OM4 S156 W L STA LU
HF OM4 S168 W L STA LU
HF OM4 S216 W L STA LU
HF OM4 S204 W L STA LU
OS1/OS2
HF 008 192 W L STA LU
HF 008 S180 W L STA LU
HF 008 S168 W L STA LU
HF 008 S156 W L STA LU
HF 008 S216 W L STA LU
HF 008 S204 W L STA LU
192 Fibre
180 Fibre
168 Fibre
156 Fibre
Product Part Numbering - MTE 05 - External
HF 062 S192 W NM STA NM
HF 062 S132 W NM STA NM
HF 062 S168 W NM STA NM
HF 062 S156 W NM STA NM
62.5/125
HF 062 S216 W NM STA NM
HF 062 S204 W NM STA NM
216 Fibre
204 Fibre
50/125
HF 050 S192 W NM STA NM
HF 050 S132 W NM STA NM
HF 050 S168 W NM STA NM
HF 050 S156 W NM STA NM
HF 050 S216 W NM STA NM
HF 050 S204 W NM STA NM
OM3
HF OM3 S192 W NM STA NM
HF OM3 S132 W NM STA NM
HF OM3 S168 W NM STA NM
HF OM3 S156 W NM STA NM
HF OM3 S216 W NM STA NM
HF OM3 S204 W NM STA NM
OM4
HF OM4 S192 W NM STA NM
HF OM4 S132 W NM STA NM
HF OM4 S168 W NM STA NM
HF OM4 S156 W NM STA NM
HF OM4 S216 W NM STA NM
HF OM4 S204 W NM STA NM
OS1/OS2
HF 008 192 W NM STA NM
HF 008 S168 W NM STA NM
HF 008 S168 W NM STA NM
HF 008 S156 W NM STA NM
HF 008 S216 W NM STA NM
HF 008 S204 W NM STA NM
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
114
Brand-Rex is pleased to offer FibrePlus cables
for specialist applications. Two FibrePlus
cables are described in this section. The UFS
Fire Survival cable is used in areas where
critical data transmission must continue
when the building structure in which it is
installed is on fire. For this reason its use in
large public buildings such as datacentres,
airports, railway stations, stadia and
onshore/ offshore industrial structures
is becoming increasingly common.
The use of the cable in building
management, fire and security systems
means that these vital systems will remain
functional in the event of a real life incident
which requires an emergency evacuation.
As a company that is driven by our
customers needs, Brand-Rex will always
be happy to offer specialist products to
order based on your own specification.
This includes complex requirements
ranging from cables for extreme
environments to simple requirements
such as composite cables, custom sheath
colours or printing. Please enquire about
our customised cable service.
S P E C I A L E N V I R O N M E N T C A B L E S
115
O62 050 OM3 OM4 BM3 BM4 008 108 208
F I R E S U R V I V A L C A B L E
Independent 3rd party tested (BRE)
Unitube design offering up to 24 fibres
Layer of fire retardant tape
Twin low smoke halogen-free sheaths
4.00mm gel filled loose tube
PRODUCT DESCRIPTION
In today’s business environment the secure
backup of business critical systems in the
event of an emergency is a pre-requisite.
The UFS 01 Fire Survival cable is used in areas
where critical data transmission must continue
when the building or structure in which it is
installed is on fire. For this reason its use in
large public buildings such as datacentres,
airports, railway stations, stadia and onshore/
offshore industrial structures is becoming
increasingly common. The use of the cable in
building management, fire and security systems
means that these vital systems will remain
functional in the event of a real life incident
which requires an emergency evacuation.
PRODUCT PERFORMANCE
Crush (N):
2500
Impact (Nm):
30
Torsion (turns / m):
1
Acid Gas Emissions:
Pass
Smoke Index:
Pass
Temp - Operation:
-40°C to +70°C
Temp - Storage:
-40°C to +70°C
Temp - Installation:
-10°C to +70°C
Fire:
(IEC 60331-25)
Pass (90 mins @ 750°C)
(BSEN50200 -2000)
Pass PH120, BS 8434-2 Pass,
IEC 60332-3-24 Pass,
IEC 60332-1-2 Pass
Brand-Rex Optical Cables - Universal UFS 01Unitube Fire Survival Cable
LSHF Outer Sheath
Corrugated Steel Tape Armour
LSHF Inner Sheath
Water Blocking Glass Yarns
Fire Retardant Tape
Gel Filled Loose Tube
Individual Coloured Fibres
13.00 210 700 130 1954-24 Fibre
Diameter
mm
Weight
kg / km
Max Tensile
Load
N
Min Static
Bend
mm
Min Dynamic
Bend
mm
Product Data
24 Fibre
16 Fibre
12 Fibre
8 Fibre
4 Fibre
Product Part Numbering
Tested in accordance with IEC 60794-1-2 unless stated
62.5/125
EF062UNI24LSTALUFS RD
EF062UNI16LSTALUFS RD
EF062UNI12LSTALUFS RD
EF062UNI8LSTALUFS RD
EF062UNI4LSTALUFS RD
50/125
EF050UNI24LSTALUFS RD
EF050UNI16LSTALUFS RD
EF050UNI12LSTALUFS RD
EF050UNI8LSTALUFS RD
EF050UNI4LSTALUFS RD
OM3
EFOM3UNI24LSTALUFS RD
EFOM3UNI16LSTALUFS RD
EFOM3UNI12LSTALUFS RD
EFOM3UNI8LSTALUFS RD
EFOM3UNI4LSTALUFS RD
OM4
EFOM4UNI24LSTALUFS RD
EFOM4UNI16LSTALUFS RD
EFOM4UNI12LSTALUFS RD
EFOM4UNI8LSTALUFS RD
EFOM4UNI4LSTALUFS RD
OS1/OS2
EF008UNI24LSTALUFS RD
EF008UNI16LSTALUFS RD
EF008UNI12LSTALUFS RD
EF008UNI8LSTALUFS RD
EF008UNI4LSTALUFS RD
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
116
FibrePlus is a comprehensive range of
premium products including Single Mode
and Multi Mode Pigtails and Patch cords
using ST, SC, FC and Small Form Factor MT-RJ
and LC Connectors and Adaptors.
All connectorised assembly types are
available as either Multi Mode; to connect
OM1, OM2, OM3 and OM4 cables and Single
Mode to connect OS1 and OS2 cables.
All are manufactured to comply with the
international standards ISO/IEC 11801,
EN50173-1 and ANSI/TIA/ETA 568C.
For rack management the Fibre Plus Optical
Patch Panel, Cable Management Plates
and Modules offer a flexible cost effective
solution with the ability to cater for growth
and churn.
Available as an empty panel, suitable for all
major connector types the product is able
to manage up to 96 Fibres in 1U using Small
Form Factor connectors.
The sliding shelf design along with other
added features enable quick and easy
reconfiguration, expansion making future
upgrades and expansion both quicker and
easier. Full Blolite support is part of the
flexible future proofing designed into
this product.
Pre-Connectorised Cable Assemblies,
Wall outlets, complete the range providing
end to end, in-building and campus
cabling solutions.
O P T I C A L C O M P O N E N T S
117
Manufactured to comply with: ISO/IEC 11801,EN50173 -1, ANSI TIA/EIA 568.C
All major connector types
Colour coded for identification
Duplex patchcords feature ‘Crossover’
OM1 Grade Cable
PRODUCT DESCRIPTION
For use in permanent connections between
transmission equipment and patch panels or
interconnect / cross connect between panels.
Patch cords are pre-constructed with connectors.
These include small form factors such as LC and
MT-RJ as well as SC, FC and ST. Based on 2.80mm
sub units (1.9mm SFF) these ruggedised cables
are sheathed with LSHF material making them
suitable for internal use.
O P T I C A L S Y S T E M S
Optical Performance (IEC 60874-1 Method 7)
Product Part Numbering
Brand-Rex Optical Components - Patch Cords62.5/12.5 Multi Mode Optical Patch Cords
Temp - Operation:
-10°c to +70°c
Temp - Storage:
-25°c to +80°c
Temp - Installation:
0°c to +70°c
Sheath Colour:
Orange
(Others available on request)
CABLE PROPERTIES
Crush (N):
1500
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1-2
0.5
0.2 0.2
20.0 20.0
0.5
ST SC
Insertion Loss Max dB
Return Loss Min dB
Insertion Loss Typical dB 0.2 0.4 0.2
20.0 20.0 20.0
0.5 0.75 0.5
FC-PC MT-RJ LC
1.00m 2.00m
FC - FC Duplex
LC - SC Duplex
LC - ST Duplex
LC - LC Duplex
MT-RJ - MT-RJ Duplex
MT-RJ - SC Duplex
MT-RJ - ST Duplex
MTRJ - LC Duplex
SC - SC Duplex
SC - ST Duplex
ST - ST Duplex
HOPFC062010FC291
HOPLC062010SC293
HOPLC062010ST293
HOPLC062010LC293
HOPMJ062010MJ292
HOPMJ062010SC292
HOPMJ062010ST292
HOPMJ062010LC292
HOPSC062010SC291
HOPSC062010ST291
HOPST062010ST291
HOPFC062020FC291
HOPLC062020SC293
HOPLC062020ST293
HOPLC062020LC293
HOPMJ062020MJ292
HOPMJ062020SC292
HOPMJ062020ST292
HOPMJ062020LC292
HOPSC062020SC291
HOPSC062020ST291
HOPST062020ST291
HOPFC062030FC291
HOPLC062030SC293
HOPLC062030ST293
HOPLC062030LC293
HOPMJ062030MJ292
HOPMJ062030SC292
HOPMJ062030ST292
HOPMJ062030LC292
HOPSC062030SC291
HOPSC062030ST291
HOPST062030ST291
HOPFC062050FC291
HOPLC062050SC293
HOPLC062050ST293
HOPLC062050LC293
HOPMJ062050MJ292
HOPMJ062050SC292
HOPMJ062050ST292
HOPMJ062050LC292
HOPSC062050SC291
HOPSC062050ST291
HOPST062050ST291
3.00m 5.00m
118
Brand-Rex Optical Components - Patch Cords50/125 Multi Mode Optical Patch Cords Manufactured to comply with:
ISO/IEC 11801,EN50173 -1, ANSI TIA/EIA 568.C
All major connector types
Colour coded for identification
Duplex patch cords feature ‘Crossover’
OM2 Grade Cable
PRODUCT DESCRIPTION
For use in permanent connections between
transmission equipment and patch panels or
interconnect / cross connect between panels.
Patch cords are pre-constructed with connectors.
These include small form factors such as LC and
MT-RJ as well as SC, FC and ST. Based on 2.80mm
sub units (1.9mm SFF) these ruggedised cables
are sheathed with LSHF material making them
suitable for internal use.Product Part Numbering
Optical Performance (IEC 60874-1 Method 7)
O P T I C A L S Y S T E M S
Temp - Operation:
-10°c to +70°c
Temp - Storage:
-25°c to +80°c
Temp - Installation:
0°c to +70°c
Sheath Colour:
Orange
(Others available on request)
CABLE PROPERTIES
Crush (N):
1500
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1-2
0.5
0.2 0.2 0.2 0.4 0.2
20.0 20.0 20.0 20.0 20.0
0.5 0.5 0.75 0.5
ST SC FC-PC MT-RJ LC
Insertion Loss Max dB
Return Loss Min dB
Insertion Loss Typical dB
1.00m 2.00m
FC - FC Duplex
LC - SC Duplex
LC - ST Duplex
LC - LC Duplex
MT-RJ - MT-RJ Duplex
MT-RJ - SC Duplex
MT-RJ - ST Duplex
MT-RJ - LC Duplex
SC - SC Duplex
SC - ST Duplex
ST - ST Duplex
HOPFC050010FC291
HOPLC050010SC293
HOPLC050010ST293
HOPLC050010LC293
HOPMJ050010MJ292
HOPMJ050010SC292
HOPMJ050010ST292
HOPMJ050010LC292
HOPSC050010SC291
HOPSC050010ST291
HOPST050010ST291
HOPFC050020FC291
HOPLC050020SC293
HOPLC050020ST293
HOPLC050020LC293
HOPMJ050020MJ292
HOPMJ050020SC292
HOPMJ050020ST292
HOPMJ050020LC292
HOPSC050020SC291
HOPSC050020ST291
HOPST050020ST291
HOPFC050030FC291
HOPLC050030SC293
HOPLC050030ST293
HOPLC050030LC293
HOPMJ050030MJ292
HOPMJ050030SC292
HOPMJ050030ST292
HOPMJ050030LC292
HOPSC050030SC291
HOPSC050030ST291
HOPST050030ST291
HOPFC050050FC291
HOPLC050050SC293
HOPLC050050ST293
HOPLC050050LC293
HOPMJ050050MJ292
HOPMJ050050SC292
HOPMJ050050ST292
HOPMJ050050LC292
HOPSC050050SC291
HOPSC050050ST291
HOPST050050ST291
3.00m 5.00m
119
Manufactured to comply with:
ISO/IEC 11801,
EN50173 -1,
ANSI TIA/EIA 568B
All major connector types
Colour coded for identification
Duplex patch cords feature ‘Crossover’
OM3 Grade Cable
PRODUCT DESCRIPTION
For use in permanent connections between
transmission equipment and patch panels or
interconnect / cross connect between panels.
Patch cords are pre-constructed with connectors.
These include small form factors such as LC and
MT-RJ as well as SC, FC and ST. Based on 2.80mm
sub units (1.9mm SFF) these ruggedised cables
are sheathed with LSHF material making them
suitable for internal use.
0.5
0.2 0.2 0.2 0.4 0.2
20.0 20.0 20.0 20.0 20.0
0.5 0.5 0.75 0.5
ST SC FC-PC MT-RJ LC
Optical Performance (IEC 60874-1 Method 7)
Insertion Loss Max dB
Return Loss Min dB
Insertion Loss Typical dB
Brand-Rex Optical Components - Patch Cords50/125 OM3 Multi Mode Optical Patch Cords
Product Part Numbering
O P T I C A L S Y S T E M S
Temp - Operation:
-10°c to +70°c
Temp - Storage:
-25°c to +80°c
Temp - Installation:
0°c to +70°c
Sheath Colour:
Aqua
(Others available on request)
CABLE PROPERTIES
Crush (N):
1500
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1-2
1.00m 2.00m
FC - FC Duplex
LC - SC Duplex
LC - ST Duplex
LC - LC Duplex
MT-RJ - MT-RJ Duplex
MT-RJ - SC Duplex
MT-RJ - ST Duplex
MT-RJ - LC Duplex
SC - SC Duplex
SC - ST Duplex
ST - ST Duplex
HOPFCOM3010FC251
HOPLCOM3010SC253
HOPLCOM3010ST253
HOPLCOM3010LC253
HOPMJOM3010MJ252
HOPMJOM3010SC252
HOPMJOM3010ST252
HOPMJOM3010LC252
HOPSCOM3010SC251
HOPSCOM3010ST251
HOPSTOM3010ST251
HOPFCOM3020FC251
HOPLCOM3020SC253
HOPLCOM3020ST253
HOPLCOM3020LC253
HOPMJOM3020MJ252
HOPMJOM3020SC252
HOPMJOM3020ST252
HOPMJOM3020LC252
HOPSCOM3020SC251
HOPSCOM3020ST251
HOPSTOM3020ST251
HOPFCOM3030FC251
HOPLCOM3030SC253
HOPLCOM3030ST253
HOPLCOM3030LC253
HOPMJOM3030MJ252
HOPMJOM3030SC252
HOPMJOM3030ST252
HOPMJOM3030LC252
HOPSCOM3030SC251
HOPSCOM3030ST251
HOPSTOM3030ST251
HOPFCOM3050FC251
HOPLCOM3050SC253
HOPLCOM3050ST253
HOPLCOM3050LC253
HOPMJOM3050MJ252
HOPMJOM3050SC252
HOPMJOM3050ST252
HOPMJOM3050LC252
HOPSCOM3050SC251
HOPSCOM3050ST251
HOPSTOM3050ST251
3.00m 5.00m
120
Manufactured to comply with:
ISO/IEC 11801,
EN50173 -1,
ANSI TIA/EIA 568B
All major connector types
Colour coded for identification
Duplex patch cords feature ‘Crossover’
OM4 Grade Cable
PRODUCT DESCRIPTION
For use in permanent connections between
transmission equipment and patch panels or
interconnect / cross connect between panels.
Patch cords are pre-constructed with connectors.
These include small form factors such as LC and
MT-RJ as well as SC, FC and ST. Based on 2.80mm
sub units (1.9mm SFF) these ruggedised cables
are sheathed with LSHF material making them
suitable for internal use.
0.5
0.2 0.2 0.2 0.4 0.2
20.0 20.0 20.0 20.0 20.0
0.5 0.5 0.75 0.5
ST SC FC-PC MT-RJ LC
Optical Performance (IEC 60874-1 Method 7)
Insertion Loss Max dB
Return Loss Min dB
Insertion Loss Typical dB
Brand-Rex Optical Components - Patch Cords50/125 OM4 Multi Mode Optical Patch Cords
Product Part Numbering
O P T I C A L S Y S T E M S
Temp - Operation:
-10°c to +70°c
Temp - Storage:
-25°c to +80°c
Temp - Installation:
0°c to +70°c
Sheath Colour:
Heather Violet
(Others available on request)
CABLE PROPERTIES
Crush (N):
1500
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1-2
1.00m 2.00m
FC - FC Duplex
LC - SC Duplex
LC - ST Duplex
LC - LC Duplex
MT-RJ - MT-RJ Duplex
MT-RJ - SC Duplex
MT-RJ - ST Duplex
MT-RJ - LC Duplex
SC - SC Duplex
SC - ST Duplex
ST - ST Duplex
HOPFCOM4010FC271
HOPLCOM4010SC273
HOPLCOM4010ST273
HOPLCOM4010LC273
HOPMJOM4010MJ272
HOPMJOM4010SC272
HOPMJOM4010ST272
HOPMJOM4010LC272
HOPSCOM4010SC271
HOPSCOM4010ST271
HOPSTOM4010ST271
HOPFCOM4020FC271
HOPLCOM4020SC273
HOPLCOM4020ST273
HOPLCOM4020LC273
HOPMJOM4020MJ272
HOPMJOM4020SC272
HOPMJOM4020ST272
HOPMJOM4020LC272
HOPSCOM4020SC271
HOPSCOM4020ST271
HOPSTOM4020ST271
HOPFCOM4030FC271
HOPLCOM4030SC273
HOPLCOM4030ST273
HOPLCOM4030LC273
HOPMJOM4030MJ272
HOPMJOM4030SC272
HOPMJOM4030ST272
HOPMJOM4030LC272
HOPSCOM4030SC271
HOPSCOM4030ST271
HOPSTOM4030ST271
HOPFCOM4050FC271
HOPLCOM4050SC273
HOPLCOM4050ST273
HOPLCOM4050LC273
HOPMJOM4050MJ272
HOPMJOM4050SC272
HOPMJOM4050ST272
HOPMJOM4050LC272
HOPSCOM4050SC271
HOPSCOM4050ST271
HOPSTOM4050ST271
3.00m 5.00m
121
Brand-Rex Optical Components - Patch CordsSingle Mode Optical Patch Cords Manufactured to comply with:
ISO/IEC 11801,EN50173 -1, ANSI TIA/EIA 568B
All major connector types
Colour coded for identification
Duplex patch cords feature ‘Crossover’
OS1/OS2 Grade Cable
PRODUCT DESCRIPTION
For use in permanent connections between
transmission equipment and patch panels or
interconnect / cross connect between panels.
Patch cords are pre-constructed with connectors.
These include small form factors such as LC, SC, FC
and ST. Based on 2.80mm sub units (1.9mm SFF)
these ruggedised cables are sheathed with LSHF
material making them suitable for internal use.
0.3
0.2 0.2 0.2 0.4 0.1
45.0 45.0 45.0 26.0 45.0
0.3 0.3 0.75 0.3
ST SC FC-PC MT-RJ LC
Optical Performance (IEC 60874-1 Method 7)
Insertion Loss Max dB
Return Loss Min dB
Insertion Loss Typical dB
Product Part Numbering Temp - Operation:
-10°c to +70°c
Temp - Storage:
-25°c to +80°c
Temp - Installation:
0°c to +70°c
Sheath Colour:
Yellow
CABLE PROPERTIES
Crush (N):
1500
Impact (Nm):
5
Torsion (turns / m):
5
Fire:
IEC 60332-1-2
1.00m 2.00m
FC - FC Duplex
LC - SC Duplex
LC - ST Duplex
LC - LC Duplex
SC - SC Duplex
SC - ST Duplex
ST - ST Duplex
HOPFC008010FC201
HOPLC008010SC203
HOPLC008010ST203
HOPLC008010LC203
HOPSC008010SC201
HOPSC008010ST201
HOPST008010ST201
HOPFC008020FC201
HOPLC008020SC203
HOPLC008020ST203
HOPLC008020LC203
HOPSC008020SC201
HOPSC008020ST201
HOPST008020ST201
HOPFC008030FC201
HOPLC008030SC203
HOPLC008030ST203
HOPLC008030LC203
HOPSC008030SC201
HOPSC008030ST201
HOPST008030ST201
HOPFC008050FC201
HOPLC008050SC203
HOPLC008050ST203
HOPLC008050LC203
HOPSC008050SC201
HOPSC008050ST201
HOPST008050ST201
O P T I C A L S Y S T E M S
3.00m 5.00m
122
O62 050 OM3 OM4 BM3 BM4 008 108 208
OM4
Red
Red/Yellow (MT-RJ)
O P T I C A L P I G TA I L S
Single Mode and Multi Mode Optical Pigtails
Manufactured to comply with: ISO/IEC 11801,EN50173 -1, ANSI TIA/EIA 568B
Based on Tight Buffered Core
900μm and 600μm
All major connector types
All major fibre types
Colour coded for identification
PRODUCT DESCRIPTION
For use in permanent connections between patch
panels and incoming cables / single blown fibres.
Pigtails are pre-constructed with connectors.
Connector options include small form factors
such as LC as well as SC, FC and ST. Based on
900μm tight buffered cores (600μm SFF) and
suitable for internal use only inside suitable Fibre
Management Systems.
Product Colour Coding
OM1 OM2 OM3
Blue
Blue/Orange (MT-RJ)
Green
Green/Brown (MT-RJ)
Grey
Grey/Orange (MT-RJ)
Optical Performance (IEC 60874-1 Method 7)
Insertion Loss Max dB
Insertion Loss Typical dB
0.5
0.2
20.0
ST
45.0
0.2
20.0
0.5
SC
45.0
0.2
20.0
0.5
FC-PC
45.0
0.4
20.0
0.75
MT-RJ
-
0.2/0.1
20.0
0.5/0.3
LC
MM/SM
45.0
Multi Mode Return Loss Min dB
Single Mode Return Loss Min dB
Temp - Operation:
-10°c to +70°c
Temp - Storage:
-25°c to +80°c
Temp - Installation:
0°c to +70°c
CABLE PROPERTIES
Crush (N):
800
Impact (Nm):
0.2
Min Bend (mm):
50
Product Part Numbering
FC - 1 metre
SC - 1 metre
ST - 1 metre
LC - 1 metre
MT-RJ - 1 metre
HOTFC062001
HOTSC062001
HOTST062001
HOTLSC062001
HOTMJ062501
HOTFC050001
HOTSC050001
HOTST050001
HOTLSC050001
HOTMJ050501
HOTFCOM3001
HOTSCOM3001
HOTSTOM3001
HOTLSCOM3001
HOTMJOM3501
HOTFC008001
HOTSC008001
HOTST008001
HOTLSC008001
-
OM1 OM2 OM3 OS1/OS2OM4
HOTFCOM4001
HOTSCOM4001
HOTSTOM4001
HOTLSCOM4001
HOTMJOM4501
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
123
Brand-Rex Optical Components - FibrePlus Patch PanelsFibrePlus - Unloaded Panels & Panel Options
Enhanced sliding tray for easy access
complete with quick release fastenings
Adjustable mounting brackets aids
installation within shallow enclosures
Minimum depth 237mm
Rear of panel offers a range of apertures
to accommodate a variety of gland
configurations
Front panel configuration options:
24 fibre using ST,SC, FC-PC, LC or MT-RJ
48 fibre using Duplex SC, Duplex LC or MT-RJ
96 fibre using Quad LC
management and glands
customised fibre management and additional
anchoring points for incoming cables or ducts
a port identification strip
PRODUCT DESCRIPTION
The FibrePlus 1U fibre 19” Optic Patch Panels
have been designed to optimise both the internal
fibre management but also to add greater
fibre density. Constructed from mild steel with
a powder coated paint finish the panels are
available in Black or Grey. The Patch Panels offers
a flexible and highly versatile solution for optical
splicing and patching. The panel’s shallow depth
allows it to be installed within the majority of
standard racks and wall mounted enclosures.
The integrated design features ensure that
even once installed panels can be readily
re-configured to accommodate the changing
needs of today’s high speed networks.
O P T I C A L S Y S T E M S
Description
FPCC1SXXX24ST2
FPCC1SXXX24DC2
FPCC1SXXX48DC2
FPCC1SXXX48SC2
FPCFMKIT001
30-0301-5
30-0506-09
BPEST101-100
BPESC101-100
BPESC301-100
30-4800-09
ML-25
HOTLCOM3001
BHCL4SM001
BHCL4MM001
Notes: *Panels are also avaialble in grey, to order please replace the ‘2’ in the catalogue number
with ‘8’. i.e. FPCC1SXSM04ST2 becomes FPCC1SXSM04ST8
Product Part Numbering
Standard panel rear gland hole configuration
Unloaded Optical for up to 24 ST or FC adaptors - Black
Unloaded Optical for up to 12 SC Duplex or LC Quad adaptors - Black
Unloaded Optical for up to 24 SC Duplex or LC Quad adaptors - Black
Unloaded Optical for up to 24 SC Simplex, MT-RJ & LC Duplex adaptors - Black
Fibre management kit including loops and 24 way splice bridge
Adaptor collar for 3mm Straight connector
5mm Bloduct bulkhead connector
ST/FC Blanking Plugs (Black) - Pack 100
SC Simplex Blanking Plug (also suitable for LC & MT -RJ) (Black) - Pack 100
SC Duplex Blanking Plug (also suitable for LC Quad) (Black) - Pack 100
25mm Manifold Gland
25mm Lock Nut
1m Simplex 900 um OM3 LC Pigtail
LC Singlemode Quad adaptor (SC Duplex Type Footprint) – 24 Included in FPCC 1SXSM96LC2
LC Multimode Quad adaptor (SC Duplex Type Footprint) - 24 Included in FPCC 1SXMM96LC2
124
483
ST Single Mode
ST Multi Mode
FC Single Mode
SC Duplex - Single Mode
SC Duplex - Multi Mode
SC Simplex Single Mode
SC Simplex Multi Mode
MT-RJ Duplex
LC Duplex Single Mode
LC Duplex Multi Mode
LC Quad Single Mode
LC Quad Multi Mode
FPCC1SXSM04ST2
FPCC1SXMM04ST2
FPCC1SXSM04FC2
FPCC1SXSM08DC2
FPCC1SXMM08DC2
FPCC1SXSM04SC2
FPCC1SXMM04SC2
FPCC1SXXM08MJ2
FPCC1SXSM08LC2
FPCC1SXMM08LC2
-
-
4 Adaptor
FPCC1SXSM06ST2
FPCC1SXMM06ST2
FPCC1SXSM06FC2
FPCC1SXSM12DC2
FPCC1SXMM12DC2
FPCC1SXSM06SC2
FPCC1SXMM06SC2
FPCC1SXXM12MJ2
FPCC1SXSM12LC2
FPCC1SXMM12LC2
-
-
6 Adaptor
FPCC1SXSM08ST2
FPCC1SXMM08ST2
FPCC1SXSM08FC2
FPCC1SXSM16DC2
FPCC1SXMM16DC2
FPCC1SXSM08SC2
FPCC1SXMM08SC2
FPCC1SXXM16MJ2
FPCC1SXSM16LC2
FPCC1SXMM16LC2
-
-
8 Adaptor
FPCC1SXSM12ST2
FPCC1SXMM12ST2
FPCC1SXSM12FC2
FPCC1SXSM24DC2
FPCC1SXMM24DC2
FPCC1SXSM12SC2
FPCC1SXMM12SC2
FPCC1SXXM24MJ2
FPCC1SXSM24LC2
FPCC1SXMM24LC2
-
-
12 Adaptor
FPCC1SXSM16ST2
FPCC1SXMM16ST2
FPCC1SXSM16FC2
FPCC1SXSM32DC2
FPCC1SXMM32DC2
FPCC1SXSM16SC2
FPCC1SXMM16SC2
FPCC1SXXM32MJ2
FPCC1SXSM32LC2
FPCC1SXMM32LC2
-
-
16 Adaptor
FPCC1SXSM24ST2
FPCC1SXMM24ST2
FPCC1SXSM24FC2
FPCC1SXSM48DC2
FPCC1SXMM48DC2
FPCC1SXSM24SC2
FPCC1SXMM24SC2
FPCC1SXXM48MJ2
FPCC1SXSM48LC2
FPCC1SXMM48LC2
FPCC1SXSM96LC2
FPCC1SXMM96LC2
24 Adaptor
Brand-Rex Optical Components - FibrePlus Patch PanelsFibrePlus - Part Loaded Patch Panels
FibrePlus Panels are pre loaded
with Fibre Optic adaptors
Front Panel for up to 24 fibre FC, ST, SC
12 or 24 way DC, 48 fibre LC, MT-RJ,
96 fibre LC quad
Minimum depth 237mm
Front Panel includes a port identification strip
Suitable for Blolite
PRODUCT DESCRIPTION
The FibrePlus 19” 1U fibre Optic Patch Panels
have been designed to optimise both the internal
fibre management but also to add greater
fibre density. Constructed from mild steel with
a powder coated paint finish the panels are
available in Black or Grey. The Patch Panels offers
a flexible and highly versatile solution for optical
splicing and patching. The panel’s shallow depth
allows it to be installed within the majority of
standard racks and wall mounted enclosures.
The integrated design features ensure that even
once installed panels can be readily re-configured
to accommodate the changing needs of today’s
high speed networks.
O P T I C A L S Y S T E M S
Description
Product Part Numbering
Standard panel rear gland hole configuration
125
482
238
44 max
O P T I C A L S Y S T E M S
Brand-Rex Optical Components - FibrePlus Patch PanelHigh Density Fibre Management Panel
Built for the High Density Fibre Cabinet
17” and 19” Frame compatible
48 LC ports 1U - using unique ½U trays
Innovative design using angled adapters for
ease of fibre management
Fully integrated fibre & splice management,
no need for multiple splice cassettes
Unique pivoting, sliding & hinged tray
35mm minimum bend radius maintained
throughout fibre management system
PRODUCT DESCRIPTION
The High Density Fibre Management Panel
offers the ultimate solution for management
of fibre in datacentres and telecoms rooms.
The panel combines a robust metal frame with
precision injection moulded plastic to deliver
a flexible and secure construction while still
offering fully integrated and flexible fibre
management. The 1U 48 LC port patch panel
facilitates patch cord routing directly into the
rack vertical side management, thus increasing
rack density and easing undue stresses on
the cords. It is designed to pivot and hinge
providing the control and security of a fixed
panel but also allowing for increased access
and usability.
PRODUCT CHARACTERISTICS
Applications
cable management products.
Installation
Inclusion of pigtails is also an option.
Packaging
Material Data
powder coated mild steel - RAL 9005 Black.
High Density Fibre Management Panel, 48 LC Ports, 1U Dual cassette, part loaded with
12 x Quad LC Multi-mode adaptors & glands - Black
High Density Fibre Management Panel, 48 LC Ports, 1U Dual cassette, part loaded with
12 x Quad LC Single-mode adaptors & glands - Black
Description
FPCPC1XMM48LC2
FPCPC1XSM48LC2
Part Number
Product Part Numbering
For corresponding High Density Fibre
Cabling Cabinet please see page 15
126
Brand-Rex Optical Components - Connectors /AdaptorsSC Optical Connectors
Connector Adaptor
Product Part Numbering
SC Simplex Connector:
SC multimode and single mode connector kits comprise of a one piece
SC body with precision ceramic ferrule, crimp, sleeve, colour coded outer shroud,
2 x colour coded 3mm strain relief boots and a 0.9mm boot.
Compliant with BS EN 61754-4
Typical Insertion Loss: MM - 0.2dB, SM - 0.15dB
Minimum Return Loss: SM 45dB
SC Duplex Connector:
SC Duplex connector kits comprise of 2 simplex connectors mounted in a two
piece polymer clip and 2 x colour coded 3mm strain relief boots.
Compliant with BS EN 61754-4
Typical Insertion Loss: MM - 0.2dB, SM - 0.15dB
Minimum Return Loss: SM 45dB
SC Simplex Adaptor:
SC Adaptors comprise of a polymer outer body and inner assembly
fitted with a precision alignment sleeve. Multimode with metal
sleeve. Single mode with Ceramic Sleeve.
Compliant with IEC 60874-15
Max. Insertion Loss: MM - 0.3dB, SM - 0.1dB
SC Duplex Adaptor:
SC Duplex adaptors comprise of a polymer outer body and an inner
assembly fitted with a precision alignment sleeve.
Multimode with metal sleeve. Single mode with Ceramic Sleeve.
Compliant with IEC 60875-14
Max. Insertion Loss: MM - 0.3dB, SM - 0.1dB
BHCSCMM001
BHCSCSM001
BHCDCMM001
BHCDCSM001
SC - MultiMode (Beige)
SC - Single Mode (Blue)
SC Duplex - Multi Mode (Beige)
SC Duplex - Single Mode (Blue)
FOCSCEPMM001
FOCSCEPSM001
FOCDCEPMM001
FOCDCEPSM001
O P T I C A L S Y S T E M S
127
ST Adaptor:
a precision alignment sleeve. They are both standard and double
‘D’ hole compatible. Multimode with metal sleeve. Single mode
with ceramic sleeve.
Compliant with BE EN 61754-2
Max. Insertion Loss: MM - 0.3dB, SM - 0.1dB
FC Adaptor:
FC adaptors comprise of a nickel plated brass body that is fitted
with a precision alignment sleeve. They are standard single and
double 'D' hole compatible.
Compliant with BS EN 61754-13
Max. Insertion Loss: SM - 0.1dB
ST Connector:
a precision ceramic ferrule, crimp sleeve, 2 x colour coded 3mm strain
reliefs and a 0.9mm boot.
Compliant with BS EN 61754-2
Strain Relief Colour Code: MM - Red, Black
SM - Yellow, Black
Typical Insertion Loss: MM - 0.2dB, SM - 0.15dB
Minimum Return Loss: SM 45dB
FC-PC Connector:
FC-PC single mode connector kits comprise of a nickel plated brass
body with a precision ceramic ferrule, stepped crimp sleeve,
2 x colour coded strain relief boots and a 0.9mm boot.
Compliant with BS EN 61754-13
Strain Relief Colour Code: SM - Yellow, Black
Typical Insertion Loss: SM - 0.15dB
Minimum Return Loss: SM 45dB
O P T I C A L S Y S T E M S
Brand-Rex Optical Components - Connectors /AdaptorsST, FC Optical Connectors
FOCSTEPMM001
FOCSTEPSM001
FOCFCEPSM001
BHCSTMM001
BHCSTSM001
BHCFCSM001
ST - Multi Mode
ST Single Mode
FC-PC Single Mode
Connector Adaptor
Product Part Numbering
128
MT-RJ Duplex Adaptor:
MT-RJ adaptors have a polymer outer body which has the outer
Compliant with BS EN 61754-18
LC Connector:
LC multimode and single mode connector kits comprise of a precision
ferrule, crimp sleeve, colour coded outer shroud, 2 x colour coded
2.0mm strain reliefs (..001) or a 0.9mm (..002) boot.
Compliant with BS EN 61754-20
Typical Insertion Loss: MM - <0.2dB, SM - <0.15dB
Minimum Return Loss: MM 20dB, SM 45dB
Available as either simplex or duplex variants.
LC Duplex Adaptor:
LC adaptors (BHCLCXM001) comprise of a polymer body with
a precision alignment sleeves. They have the outer dimensions
of a simplex SC style adaptor.
Compliant with BS EN 61754-20
LC Quad Adaptor:
LC adaptors (BHCL4XM001) comprise of a polymer body with
precision alignment sleeves. They have the outer dimensions
of a duplex SC style adaptor.
Compliant with BS EN 61754-20
PRODUCT DESCRIPTION
The range of Brand-Rex SFF (Small Form Factor) connectivity solutions are reliable and robust, quality products. SFF connectors are duplex fibre
connectors which have a footprint similar to RJ-45's, offering the system integrator / installer an improved patching density, saving valuable rack
space. The products can be used at the panel or in the work area supporting both backbone fibre and fibre to the desk solutions. Brand-Rex offers
a choice of leading, de-facto, SFF connectors, the MT-RJ and the LC.
O P T I C A L S Y S T E M S
Brand-Rex Optical Components - Connectors /AdaptorsST, FC Optical Connectors
FOCLCEPMM001
FOCLCEPSM001
FOCLSEPMM001
FOCLSEPSM001
FOCLSEPMM002
FOCLSEPSM002
-
-
-
BHCLCMM001
BHCLCSM001
-
-
-
-
BHCL4MM001
BHCL4SM001
BHCMJXX001
LC Multi Mode (Duplex) (Beige)
LC Single Mode (Duplex) (Blue)
LC Multi Mode (Simplex) (Beige)
LC Single Mode (Simplex) (Blue)
LC Multi Mode (Simplex Pigtail) (Beige)
LC Single Mode (Simplex Pigtail) (Blue)
LC Multi Mode (Quad) Beige
LC Single Mode (Quad) (Blue)
MT RJ adaptor
Connector Adaptor
Product Part Numbering
129
45
5050
50
37.7
24.3
36
22
Brand-Rex Optical Components Faceplate ModulesFibrePlus – 45mm x 45mm and 50mm x 50mm
Faceplate Modules
PRODUCT DESCRIPTION
The Brand-Rex range of 45 x 45 Fibre faceplate
modules is designed for use in installation
poles, wall trunking and back boxes.
Configurations are available for Euro style 45
x 45mm faceplates and UK style 50 x 50mm
versions offering a versatile solution.
Quad and Duplex LC option
Duplex SC option
cover
identification
Description Catalogue Number Quantity per Pack
45 x 45 mm Fibre Faceplate Module LC Duplex Multi Mode FPCANGLCMM3 10
45 x 45 mm Fibre Faceplate Module LC Duplex Single Mode FPCANGLCSM3 10
45 x 45 mm Fibre Faceplate Module LC Quad Multi Mode FPCANGL4MM3 10
45 x 45 mm Fibre Faceplate Module LC Quad Single Mode FPCANGL4SM3 10
45 x 45 mm Fibre Faceplate Module SC Duplex Multi Mode FPCANGDCMM3 10
45 x 45 mm Fibre Faceplate Module SC Duplex Single Mode FPCANGDCSM3 10
50 x 50 mm Fibre Faceplate Module LC Duplex Multi Mode FPCANGLCMM3UK 10
50 x 50 mm Fibre Faceplate Module LC Duplex Single Mode FPCANGLCSM3UK 10
50 x 50 mm Fibre Faceplate Module LC Quad Multi Mode FPCANGL4MM3UK 10
50 x 50 mm Fibre Faceplate Module LC Quad Single Mode FPCANGL4SM3UK 10
50 x 50 mm Fibre Faceplate Module SC Duplex Multi Mode FPCANGDCMM3UK 10
50 x 50 mm Fibre Faceplate Module SC Duplex Single Mode FPCANGDCSM3UK 10
86 x 147 mm Double Gang Modular Faceplate MMCWDOUNI031 1
44 mm Deep Double Gang UK Back Box MMCDGBB44002 1
86 x 86mm Single Gang Modular Faceplate MMCWDOUNI030 1
44mm Deep Back Box MMCSGBB44001 1
O P T I C A L S Y S T E M S
130
O P T I C A L S Y S T E M S
Manufactured to comply with:
ISO/IEC 11801 Amd 1 and 2
EN50173-1
ANSI TIA/EIA 568-C
PRODUCT DESCRIPTION
The Secure Lock system comprises of
secure patch cord, blank adaptor plug
and extraction tool.
The Secure LC patch cord prevents unauthorised
port access or changes as it can only be removed
using a unique keyed extraction tool, making
it ideal for creating a secure area within Data
centres and IT networks.
The Duplex LC patch cords will plug into any
industry compliant Duplex and Quad adapters or
active interfaces
The locking plug closes off ports, restricting
access and offering dust protection. When fitted,
the plug can only be removed with the correct
the tool.
The keyed extraction tool unlocks and releases
the connectors from ports. Keys are available for
custom applications and can be customised to
only release the same coloured LC connector or
blank adapter plug.
secure and tamper proof connection
adapters and SFP LC transceiver interfaces
SM, MM cables and 900μm fibre tails
unauthorised change or removal
and application
CABLE PROPERTIES
Crush (N): 3.5 N/mm
Impact (Nm): 0.74 Nm
Torsion (turns/m): 10
Fire: IEC 60332 and UL1666
Temp - Operation: -40°c to +70°c
Temp - Storage: -40°c to +70°c
Temp installation: -10°c to +70°c
Brand-Rex Optical ComponentsSecure LC Patch Cord System
131
O P T I C A L S Y S T E M S
Product Part Numbering
* Part is also available for custom applications with Key colour matched to the connector colour
Brand-Rex Optical ComponentsSecure LC Patch Cord System
OLP-LC-xxx-yyy-LC-zzzOptical Locking
Patch Cord
Connector type End 1 xxx = Fibre Type Standard yyy = Length Connector type End 2 zzz = Connector Colour
LC = LC 008 = SM 010 = 1.0m LC = LC 001 = Red
0M3 = 0M3 020 = 2.0m 002 = Black
0M4 = 0M4 030 = 3.0m 003 = White
050 = 5.0m 005 = Green
Other lengths available
upon request
006 = Yellow
008 = Grey
009 = Orange
051 = Aqua
Other colours available
upon request
Description Length Catalogue Number
LC Duplex Singlemode Secure Patch cord 1m
LC Duplex Singlemode Secure Patch cord 2m
LC Duplex Singlemode Secure Patch cord 3m
LC Duplex Singlemode Secure Patch cord 5m
LC Duplex OM3 Multimode Secure Patch cord 1m
LC Duplex OM3 Multimode Secure Patch cord 2m
LC Duplex OM3 Multimode Secure Patch cord 3m
LC Duplex OM3 Multimode Secure Patch cord 5m
LC Duplex OM4 Multimode Secure Patch cord 1m
LC Duplex OM4 Multimode Secure Patch cord 2m
LC Duplex OM4 Multimode Secure Patch cord 3m
LC Duplex OM4 Multimode Secure Patch cord 5m
Secure Patch Cord Blank Adaptor Plug n/a OLCLCBLK-xxx
Secure Patch Cord Master Extraction Key (Violet)* n/a OLCLCTOOL-015
132
O P T I C A L C O M P O N E N T S
PRODUCT DESCRIPTION
KeyQuick® Mechanical Splice is an innovative,
quick and easy to use mechanical splice. The full
field termination solution includes mechanical
splice and splice holders as well as universal
connectors and is designed to offer installers
a fast, accurate and user friendly splicing process.
The unique transparent body and visual
fault locater offer an installation time of only
30 seconds, allowing 2.5 times more fibre
connections to be made when compared with
the traditional fusion splice method.
The KeyQuick® mechanical splice offers
industry leading reliability and its unique
design gives fantastic performance results,
typically under 0.1dB.
splice verification
PRODUCT CHARACTERISTICS
Applications: LAN, WAN, Data
centres, FTTx, Metro
Networks, Telecoms,
Network Monitoring
IEC11801 compliant
ITU-T G.671
MECHANICAL SPECIFICATIONS
Assembly Time: 30 secs
(after prep time)
Mean Insertion Loss: 0.1dB
Return Loss (dB): -60dB typical
Pull Strength (N): Universal 0.5fkg
(900μm),
Operating Temp (⁰C): -40 - +75
Materials: Engineering plastics
& Index matching gel
Dimensions (mm) 38 x 3.8 x 6.5
(L x W x H)
Brand-Rex Optical ComponentsKeyQuick® Mechanical Splice
Before connection
Insert the fibre Push to the end Press the button
KeyQuick® Mechanical Splice 250μm, 900μm
KeyQuick® Mechanical Splice Holder
Clear
Black
100
50
FPCMS001
FPCMSH06
Description Catalogue NumberColourQty
Splice HolderAfter connection
133
Before connection
Strip and cleave Insert and press Fit the boot
After connection
PRODUCT DESCRIPTION
KeyQuick® Field Installable KQ10 Connectors
offer an innovative solution for onsite connector
terminations. The SC connectors are ideal for
offering an easy, fast, accurate and user friendly
connector splicing process.
The unique transparent body and visual fault
locater offer a quick installation time of only 30
seconds, allowing 2.5 times more connections
to be made when compared with the traditional
fusion splice method. The connectors are very
easy to assemble and can be used without any
specialised training.
The KeyQuick® connectors offer industry leading
reliability and their unique design gives fantastic
performance results, typically 0.2dB.
confirmation
PRODUCT CHARACTERISTICS
Applications: LAN, WAN, Data
centres, FTTx, Metro
Networks, Telecoms,
Network Monitoring
IEC11801 compliant
ITU-T G.671
MECHANICAL SPECIFICATIONS
Assembly Time: 30 secs
(after prep time)
Mean Insertion Loss: 0.2dB
Return Loss (dB): -60dB typical
Pull Strength (N): Universal 0.5fkg
(900μm),
Operating Temp (⁰C): -40 - +75
Materials: Engineering plastics
& Index matching gel
Dimensions (mm) 38 x 3.8 x 6.5
(L x W x H)
Brand-Rex Optical ComponentsKeyQuick® KQ10 Field Installable Connectors
KeyQuick® SC APC Singlemode Connector -
Universal G652D
KeyQuick® SC UPC Singlemode Connector -
Universal G652D
KeyQuick® SC UPC Multimode Connector -
Universal 62.5/125
KeyQuick® SC UPC Multimode Connector -
Universal 50/125 OM3
KeyQuick® SC UPC Multimode Connector -
Universal 50/125 OM4
Green with black boot
Blue with black boot
Beige with black boot
Clear Blue with black boot
Aqua with black boot
25
25
25
25
25
FOCACFT008001
FOCUCFT008001
FOCUCFT062001
FOCUCFTOM3001
FOCUCFTOM4001
Description Catalogue NumberColourQty
O P T I C A L C O M P O N E N T S
134
Customer requirements in the
ever-advancing communications market
continues to grow, stretching scarce
bandwidth resources and truly testing
the performance of today’s networks.
In choosing cabling system solutions,
whether for small, medium or large
multi site locations, server farms or
co-location datacentres, network planners
have some serious issues to consider.
Among these is the decision as to which
type and mix of fibre to install to allow for
network expansion and upgrades has been
a dilemma for many years.
In the past, industry practice has been
to install ‘dark fibre’ to meet future demands,
however, this strategy is by no means
risk-free as unterminated, untested fibres
may not be fit for purpose when the time
comes to light the fibres in the future.
Fortunately there is a simple and cost
effective solution - Brand-Rex Air Blown
Fibre Systems offer solutions Internal and
External applications with their market
leading Blolite and MicroBlo. The use of
Air Blown Fibre Systems gives complete
freedom from risk by pre-installing a ducting
route and then blowing in the fibre element
(and paying for it) only when required.
The Blolite system was one of the first
Air Blown Fibre systems, it is also regarded
as the 'industry standard' Air Blown Fibre
System. The Blolite system is very versatile
with backbone and / or fibre to the desk
links and can even allow for long distance
link of up to 1km. Blolite is easily installed,
by using compressed air, there is no
disruption to the workplace, Blolite fibres
are simply terminated and are compatible
with all standard optical connectors.
failure rate since the first installations in 1988
- truly an 'insurance policy' for high speed
networks. It is no surprise that major users
such as Manchester Airport, IBM, Ericsson,
ABN Amro, the British MoD, Aerospatiale,
advantage of the system.
A I R B L O W N F I B R E S Y S T E M S
135
Microduct size = 3/2.1mm
Part
Number
Description Diameter
(mm)
Weight
(kg/km)
Tensile
Load
(N)*
Min
Bend
Radius
Installed
(mm)**
Min Bend
Radius
Short
Term
(mm)***
BL01IN0321 1w 3/2.1mm (PO)-I 5.0 29 70 75 25
BL04IN0321 4w 3/2.1mm (PO)-I 9.3 67 150 100 50
BL07IN0321 7w 3/2.1mm (PO)-I 11.7 89 400 120 60
BL12IN0321 12w 3/2.1mm (PO)-I 15.2 126 500 200 100
BL19IN0321 19w 3/2.1mm (PO)-I 17.7 165 1000 270 135
Part
Number
Description Diameter
(mm)
Weight
(kg/km)
Tensile
Load
(N)*
Min
Bend
Radius
Installed
(mm)**
Min Bend
Radius
Short
Term
(mm)***
BL01IN0535 1w 5/3.5mm (LSHF)-I 5.0 15 50 154 25
BL02IN0535 2w 5/3.5mm (LSHF)-I 7.5 x 13.0 100 300 262 40
BL04IN0535 4w 5/3.5mm (LSHF)-I 15.2 157 500 294 128
BL07IN0535 7w 5/3.5mm (LSHF)-I 18.6 203 700 354 180
BL12IN0535 12w 5/3.5mm (LSHF)-I 24.0 280 1150 468 350
BL19IN0535 19w 5/3.5mm (LSHF)-I 29.6 415 1650 554 410
Part
Number
Description Diameter
(mm)
Weight
(kg/km)
Tensile
Load
(N)*
Min
Bend
Radius
Installed
(mm)**
Min Bend
Radius
Short
Term
(mm)***
BL01IN0806 1w 8/6mm (LSHF)-I 8.0 50 120 214 40
BL02IN0806 2w 8/6mm (LSHF)-I 10.5 x 19.0 173 600 262 80
BL04IN0806 4w 8/6mm (LSHF)-I 23.0 305 1000 440 180
BL07IN0806 7w 8/6mm (LSHF)-I 27.6 384 1500 534 270
BL12IN0806 12w 8/6mm (LSHF)-I 36.0 598 1500 718 360
Microduct size = 5/3.5mm
Microduct size = 8/6mm
Brand-Rex Air Blown Fibre - Blolite Blolite Internal MultiDucts
Disponibles con microconductos
de 3mm, 5mm y 8mm
Diseño no metálico
Identificación del microconducto simple
DESCRIPCIÓN DEL PRODUCTO
Para facilitar la instalación de la fibra óptica
soplada simple de Blolite, dispone de una gama
de microconductos de tomas múltiples en los
que pueden inyectarse fibras de Blolite. La parte
interna de estos multiconductos se fabrica con
el microconducto estándar de Blolite y a su
alrededor se coloca una capa de cinta de poliéster
y una cubierta externa de LSHF que los hace
adecuados para aplicaciones internas.
RENDIMIENTO DEL PRODUCTO
Fuego:
IEC 60332-1
Temperatura de funcionamiento:
-20 °C a +60 °C
Temperatura de almacenamiento:
-40°C a +80 °C
Temperatura de instalación
-10°C a +70 °C
Cubierta externa de LSHF
Cinta de poliéster
Microconducto
A I R B L O W N F I B R E S Y S T E M S
136
Brand-Rex Air Blown Fibre - BloliteBlolite Direct Intall MultiDucts
Available with 5mm or 8mm MicroDucts
Non Metallic Design
MicroDuct Numbered for Identification
PRODUCT DESCRIPTION
To facilitate the installation of Blolite single blown
fibres a range of multi-way MicroDucts into
which Blolite fibres can be blown are available.
The external range of these MultiDucts are
constructed with the standard Blolite MicroDuct
surrounded with a layer of Polyester tape and a
Polyethylene outer sheath making them suitable
for direct install applications.
PRODUCT PERFORMANCE
Temp - Operation: -20°c to +60°c
Temp - Storage: -40°c to +70°c
Temp - Installation: -10°c to +70°c
Tested in accordance with IEC60794-5
unless otherwise stated
Microduct size = 5/3.5mm
Microduct size = 8/6mm
PE Outer Sheath
Polyester Tape
MicroDuct
Part
Number
Description Diameter
(mm)
Weight
(kg/km)
Tensile
Load
(N)*
Min
Bend
Radius
Installed
(mm)**
Min Bend
Radius
Short
Term
(mm)***
BL01DI0535 1w 5/3.5mm (LSHF)-O 7.5 30.8 380 168 40
BL02DI0535 2w 5/3.5mm (LSHF)-O 7.5 x 13.0 85.3 630 268 60
BL04DI0535 4w 5/3.5mm (LSHF)-O 15.2 123.7 900 310 180
BL07DI0535 7w 5/3.5mm (LSHF)-O 18.6 180.4 1250 368 250
BL12DI0535 12w 5/3.5mm (LSHF)-O 24.0 280.9 1800 484 310
BL19DI0535 19w 5/3.5mm (LSHF)-O 29.6 402.3 2600 568 370
Part
Number
Description Diameter
(mm)
Weight
(kg/km)
Tensile
Load
(N)*
Min
Bend
Radius
Installed
(mm)**
Min Bend
Radius
Short
Term
(mm)***
BL01DI0806 1w 8/6mm (LSHF)-O 10.5 57.7 450 228 80
BL02DI0806 2w 8/6mm (LSHF)-O 10.5 x 19.0 151.8 800 262 95
BL04DI0806 4w 8/6mm (LSHF)-O 23.0 225.5 1250 454 280
BL07DI0806 7w 8/6mm (LSHF)-O 27.6 344.8 1750 548 380
BL12DI0806 12w 8/6mm (LSHF)-O 36.0 548.1 2000 732 540
A I R B L O W N F I B R E S Y S T E M S
137
MicroDuct Size Selection Guidelines - Size vs Fibre CountSingle Blown Fibre Elements
Unique ‘Blowable’ coating
12 Standard Colours
Installation up to 1000m
PRODUCT DESCRIPTION
The Blolite system offers a complete range
of high quality single mode and multimode
optical fibres, with a blowable coating and
fibre is strippable with standard tools and is
compatible with standard connector types.
Blolite fibre is available in twelve standard colours
and is supplied on plastic spools in 2km or 4km
lengths for installation into Blolite 3mm, 5mm
and 8mm MicroDuct by trained and licensed
Blolite installers using the IM2000 blow head.
Outer Buffer Layer
First Buffer Layer
Primary coated optical fibre
A I R B L O W N F I B R E S Y S T E M S
MicroDuct Size Selection Guidelines
3mm
3mm
3mm
3mm
3mm
8mm
8mm
8mm
8mm
8mm
3mm
3mm
3mm
3mm
3mm
8mm
8mm
8mm
8mm
8mm
3mm
3mm
3mm
5mm
5mm
8mm
8mm
8mm
8mm
8mm
5mm
5mm
5mm
5mm
5mm
8mm
8mm
8mm
8mm
8mm
100
200
300
400
500
600
700
800
900
1000
1 Fibre 2 Fibre 4 Fibre 6 Fibre
5mm
5mm
5mm
5mm
5mm
8mm
8mm
8mm
8mm
8mm
8 Fibre
5mm
5mm
5mm
5mm
8mm
-
-
-
-
-
12 FibreBlowing
Distance (Metres)
10-0101-03
10-0101-05
10-0101-06
10-0101-07
10-0101-08
10-0101-09
10-0101-10
10-0101-11
10-0101-12
10-0101-13
10-0101-14
10-0101-15
10-0005-03
10-0005-05
10-0005-06
10-0005-07
10-0005-08
10-0005-09
10-0005-10
10-0005-11
10-0005-12
10-0005-13
10-0005-14
10-0005-15
10-0003-03
10-0003-05
10-0003-06
10-0003-07
10-0003-08
10-0003-09
10-0003-10
10-0003-11
10-0003-12
10-0003-13
10-0003-14
10-0003-15
10-0200-03
10-0200-05
10-0200-06
10-0200-07
10-0200-08
10-0200-09
10-0200-10
10-0200-11
10-0200-12
10-0200-13
10-0200-14
10-0200-15
White
Black
Blue
Orange
Green
Red
Grey
Yellow
Brown
Violet
Pink
Turquoise
62.5/125 50/125 OM3 OS1/OS2
Product Part Numbering
OM4
10-0004-03
10-0004-05
10-0004-06
10-0004-07
10-0004-08
10-0004-09
10-0004-10
10-0004-11
10-0004-12
10-0004-13
10-0004-14
10-0004-15
138
O62 050 OM3 OM4 BM3 BM4 008 108 208
Brand-Rex Air Blown Fibre – MicroBlo2-12 Fibre Blown Micro Cable
PRODUCT DESCRIPTION
Microduct cabling systems are popular
solutions for building flexibility into a network,
they can be populated when needed and
leave spare capacity for future growth. The
ability to defer initial installation costs is a key
advantage of an air blown cable installation
over traditional cable installations. The new
MicroBlo air blown loose tube microduct
cable is available with fibre counts from 2
to 12 in a 2.5 mm diameter package. The
cable has been specifically designed and
developed for improved installation efficiency
in pre-installed 5 / 3.5 mm microducts using
existing air blown installation techniques.
PRODUCT PERFORMANCE
Crush (N): 250
Temp - Operational: -20°C to +60°C
Temp - Storage: -40°C to +70°C
Temp - Installation: -10°C to +40°C
Impact Resistance: 1J
Torsion: 1 Turn per 1m
Water Penetration: < 3 m @ 24 h
Product Data
2 – 12 fibre
Thermoplastic sheath
Gel filled Loose Tube
Individual Coloured Fibres
502.5 755
2 fibre
4 fibre
6 fibre
8 fibre
12 fibre
Fibre count
HF062BMC2WNM3
HF062BMC4WNM3
HF062BMC6WNM3
HF062BMC8WNM3
HF062BMC12WNM3
62.5/125
HF050BMC2WNM3
HF050BMC4WNM3
HF050BMC6WNM3
HF050BMC8WNM3
HF050BMC12WNM3
50/125
HFOM3BMC2WNM3
HFOM3BMC4WNM3
HFOM3BMC6WNM3
HFOM3BMC8WNM3
HFOM3BMC12WNM3
HFOM4BMC2WNM3
HFOM4BMC4WNM3
HFOM4BMC6WNM3
HFOM4BMC8WNM3
HFOM4BMC12WNM3
0M3 0M4
HF008BMC2WNM3
HF008BMC4WNM3
HF008BMC6WNM3
HF008BMC8WNM3
HF008BMC12WNM3
OS1/OS2
A I R B L O W N F I B R E S Y S T E M S
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
Product Part Numbering
Diameter
mm
Weight
kg / km
Max Tensile
Load
N
Min Dynamic
Bend
mm
139
O62 050 OM3 OM4 BM3 BM4 008 108 208
PE Sheath
Gel Filled
Loose Tube
Individual Coloured Fibres
Rigid Glass Central
Strength Member
PRODUCT DESCRIPTION
Microduct cabling systems are popular
solutions for building flexibility into a network,
they can be populated when needed and
leave spare capacity for future growth.
The ability to defer initial installation costs
is a key advantage of an air blown cable
installation over traditional cable installations.
The new MicroBlo air blown loose tube
microduct cable is available with fibre counts
from 12 to 72 in a 6.0 mm diameter package.
The micro cable is constructed of a non
metallic, resin bonded glass central strength
member and high density polyethylene sheath.
The cable has been specifically designed and
developed for improved installation efficiency
in pre-installed 10/8 mm microducts using
existing air blown installation techniques.
Dry water blocking technology ensures
the cable cores are fully water blocked.
PRODUCT CHARACTERISTICS
Crush: 700N
Maximum Tensile Load: 450N
Minimum Bend Radius: 124mm
Weight: 25 kg/km
Temp - Operation: -15°C to +60°C
Temp - Storage: -30°C to +70°C
Temp - Installation: -10°C to +40°C
Water Penetration: <3m @ 24h
Fibre count 62.5/125 50/125 OS1/OS2
12 fibres HF062BMC12WNM6 HF050BMC12WNM6 HFD08BMC12WNM6
24 fibres HF062BMC24WNM6 HF050BMC24WNM6 HFD08BMC24WNM6
36 fibres HF062BMC36WNM6 HF050BMC36WNM6 HFD08BMC36WNM6
48 fibres HF062BMC48WNM6 HF050BMC48WNM6 HFD08BMC48WNM6
60 fibres HF062BMC60WNM6 HF050BMC60WNM6 HFD08BMC60WNM6
72 fibres HF062BMC72WNM6 HF050BMC72WNM6 HFD08BMC72WNM6
A I R B L O W N F I B R E S Y S T E M S
Brand-Rex Air Blown Fibre - MicroBlo 12-72 Fibre Blown Micro Cable
6.0 25 450 12412-72Fibre
Diameter
mm
Weight
kg / km
Max Tensile
Load
N
Min Dynamic
Bend
mm
Product Data
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
Fibre Selection Codes
Product Part Numbering
140
O62 050 OM3 OM4 BM3 BM4 008 108 208
Brand-Rex Air Blown Fibre – MicroBloUp to 96 Fibre Micro Cable
A I R B L O W N F I B R E S Y S T E M S
Non-metallic, Resin Bonded Glass
central strength member.
Layer of stranded elements:-
Maximum 12 fibres per gel filled tube,
plus solid fillers as necessary.
Dry water blocked interstices
High Density Polyethylene Sheath
PRODUCT DESCRIPTION
Microduct cabling systems are popular solutions
for building flexibility into a network, they can
be populated when needed and leave spare
capacity for future growth. The ability to defer
initial installation costs is a key advantage of
an air blown cable installation over traditional
cable installations. The new Microblo air blown
loose tube microduct cable is available with fibre
counts of 84 and 96 fibres in a 7.0mm diameter
package. The cable has been specifically
designed and developed for improved
installation efficiency in pre-installed 12 /9.4 mm
microducts using existing air blown installation
techniques. Dry water blocking technology
ensures the cable cores are fully water blocked.
PRODUCT PERFORMANCE
Crush (N): 700
Temp - Operational: -15°C to +60°C
Temp - Storage: -30°C to +70°C
Temp - Installation: -10°C to +60°C
Impact Resistance: 1J
Torsion: 1 Turn per 2m
Water Penetration: < 3 m @ 24 h
Product Data
Up to 96 fibre
Gel filled Loose Tube
Individual Coloured Fibres
Glass Central Strength Member
PE Sheath
1447.0 100038
84 fibre
96 fibres
Fibre count
HF062BMC84WNM8
HF062BMC96WNM8
62.5/125
HF050BMC84WNM8
HF050BMC96WNM8
50/125
HFOM3BMC84WNM8
HFOM3BMC96WNM8
HFOM4BMC84WNM8
HFOM4BMC96WNM8
0M3 0M4
HF008BMC84WNM8
HF008BMC96WNM8
OS1/OS2
Fibre Selection Codes
Use these part number identifiers to select the fibre type you require by replacing the fibre code
in the part number e.g. HFOM3PDC24LU becomes HFBM3PDC24LU.
Product Part Numbering
Diameter
mm
Weight
kg / km
Max Tensile
Load
N
Min Dynamic
Bend
mm
141
Brand-Rex Air Blown Fibre – MicroBloMicroBlo Direct Install Protected MicroDucts
A I R B L O W N F I B R E S Y S T E M S
5/3.5mm, 10/8mm and
12/10mm Microducts
1, 2, 4, 7, 12, and 19 Multi-ways
HDPE Sheath
Testing to guidelines set in IEC60794-5
PRODUCT DESCRIPTION
Microduct cabling systems are popular
solutions for building flexibility into a network,
they can be populated when needed and
leave spare capacity for future growth.
The ability to defer initial installation costs
is a key advantage of an air blown cable
installation over traditional cable installations.
To facilitate the installation of Microblo
Microcables, a range of Protected Microducts
(multiways) into which Microcables can be
blown are available. The Direct Install range
of Protected Microducts are constructed
with standard individual microducts with
a PE sheathing for installation into existing
duct and sub-ducting infrastructure.
PRODUCT PERFORMANCE
Temp - Operational: -40°C to +70°C
Temp - Storage: -40°C to +70°C
Temp - Installation: -10°C to +50°C
HDPE Sheath
Product Data
1W 5/3.5mm
2W 5/3.5mm
4W 5/3.5mm
7W 5/3.5mm
12W 5/3.5mm
19W 5/3.5mm
MB01DI0535
MB02DI0535
MB04DI0535
MB07DI0535
MB12DI0535
MB19DI0535
Part Number
Microduct size = 5/3.5mm Outer diameter/Bore
Description Diameter
(mm)*
Weight
(kg/km)
Installed
(mm)
Installation Tensile
Force (N) (Max)
Min Bend
Radius Installed
(mm)**
Min Bend
Radius Short
Term (mm)***
5
11.5
13.6
16.5
21.5
26.5
9.5
36
60
96
160
230
135
270
540
945
1620
2565
50
115
136
165
21.5
265
75
172.5
204
247.5
322.5
397.5
1W 10/8mm
2W 10/8mm
4W 10/8mm
7W 10/8mm
12W 10/8mm
MB01DI1008
MB02DI1008
MB04DI1008
MB07DI1008
MB12DI1008
Part Number
Microduct size = 10/8mm Outer diameter/Bore
Description Diameter
(mm)*
Weight
(kg/km)
Installed
(mm)
Installation Tensile
Force (N) (Max)
Min Bend
Radius Installed
(mm)**
Min Bend
Radius Short
Term (mm)***
10
21.5
25.6
31.5
41.5
27
84
160
280
414
380
760
1520
2660
4560
100
215
256
315
415
150
322.5
384
472.5
622.5
1W 12/10mm
2W 12/10mm
4W 12/10mm
7W 12/10mm
MB01DI1210
MB02DI1210
MB04DI1210
MB07DI1210
Part Number
Microduct size = 12/10mm Outer diameter/Bore
Description Diameter
(mm)*
Weight
(kg/km)
Installed
(mm)
Installation Tensile
Force (N) (Max)
Min Bend
Radius Installed
(mm)**
Min Bend
Radius Short
Term (mm)***
12
25.5
30
37.5
34
110
200
320
465
930
1860
3255
120
255
300
375
180
382.5
450
562.5
Microducts
142
Brand-Rex Air Blown Fibre – MicroBloMicroBlo Flat Burial Protected MicroDucts
A I R B L O W N F I B R E S Y S T E M S
12.8mm, and 14/10mm Microducts
3, 4, 5 and 6 Multi-ways
HDPE Sheath
Testing to guidelines set in IEC60794-5
PRODUCT DESCRIPTION
Microduct cabling systems are popular
solutions for building flexibility into a network,
they can be populated when needed and leave
spare capacity for future growth.
The ability to deferinitial installation costs
is a key advantage of an air blown cable
installation over traditional cable installations.
To facilitate the installation of Microblo
Microcables, a range of Protected Microducts
(multiways) into which Microcables can be
blown are available. The Flat Burial range of
Protected Microducts are constructed with
thick walled individual Microduct which are
suitable for direct burial by themselves.
The flat burial products adds a connecting
web in the construction to aid installation and
allow individual microducts to be branched
off for building and access applications.
PRODUCT PERFORMANCE
Temp - Operational: -40°C to +70°C
Temp - Storage: -40°C to +70°C
Temp - Installation: -10°C to +50°C
Product Data
3W 12/8mm
4W 12/8mm
5W 12/8mm
6W 12/8mm
MB03FB1208
MB04FB1208
MB05FB1208
MB06FB1208
Part Number
Microduct size = 12/8mm Outer diameter/Bore
Description Width
(mm)
Height
(mm)
Weight
(kg/km)
Max
Installation
Tensile Force
(N)
Min Bend
Radius
Installed
(mm)*
Min Bend
Radius Short
Term (mm)**
44
58
73
88
217.5
290
310
495
13
13
13
13
2520
3360
4200
5000
440
580
730
880
645
870
1095
1320
3W 14/10mm
4W 14/10mm
5W 14/10mm
6W 14/10mm
MB03FB1410
MB04FB1410
MB05FB1410
MB06FB1410
Part Number
Microduct size = 14/10mm Outer diameter/Bore
Description
49
66
83
100
290
380
490
580
15
15
15
15
3030
4040
5000
6000
490
660
830
1000
735
990
1245
1500
Width
(mm)
Height
(mm)
Weight
(kg/km)
Max
Installation
Tensile Force
(N)
Min Bend
Radius
Installed
(mm)*
Min Bend
Radius Short
Term (mm)**
143
Brand-Rex Air Blown Fibre – MicroBloMicroBlo Direct Burial Protected MicroDucts
A I R B L O W N F I B R E S Y S T E M S
7/3.5mm, 12/8mm and 14/10mm Microducts
1, 2, 4, 7, 12, 19 and 24 Multi-ways
HDPE Sheath
Testing to guidelines set in IEC60794-5
PRODUCT DESCRIPTION
Microduct cabling systems are popular
solutions for building flexibility into a network,
they can be populated when needed and leave
spare capacity for future growth.
The ability to defer initial installation costs
is a key advantage of an air blown cable
installation over traditional cable installations.
To facilitate the installation of Microblo
Microcables, a range of Protected Microducts
(multiways) into which Microcables can be
blown are available. The Direct Burial range
of Protected Microducts are constructed with
thick wall, direct burial individual microducts
with an overall HDPE sheathing making them
suitable for direct burial applications.
PRODUCT PERFORMANCE
Temp - Operational: -40°C to +70°C
Temp - Storage: -40°C to +70°C
Temp - Installation: -10°C to +50°C
HDPE Sheath
Product Data
1W 7/3.5mm
2W 7/3.5mm
4W 7/3.5mm
7W 7/3.5mm
12W 7/3.5mm
19W 7/3.5mm
24W 7/3.5mm+1W 14/10mm
MB01DB0735
MB02DB0735
MB04DB0735
MB07DB0735
MB12DB0735
MB19DB0735
MB24DB0735
Part Number
Microduct size = 7/3.5mm Outer diameter/Bore
Description Diameter
(mm)*
Weight
(kg/km)
Installed
(mm)
Installation Tensile
Force (N) (Max)
Min Bend
Radius Installed
(mm)**
Min Bend
Radius Short
Term (mm)***
7
15.5
18.4
22.5
29.5
36.5
43
28
83.4
145
230
372
620
844
390
780
1560
2730
4680
7400
9400
70
155
184
225
295
365
430
105
232.5
276
337.5
442.5
547.5
645
Microducts
1W 12/8mm
2W 12/8mm
4W 12/8mm
7W 12/8mm
MB01DB1208
MB02DB1208
MB04DB1208
MB07DB1208
Part Number
Microduct size = 12/8mm Outer diameter/Bore
Description Diameter
(mm)*
Weight
(kg/km)
Installation Tensile
Force (N) (Max)
Min Bend
Radius Installed
(mm)**
Min Bend
Radius
Short Term
(mm)***
12
25.5
30
37.5
59
160
305
495
840
1680
3360
5880
120
255
300
375
180
382.5
450
562.5
1W 14/10mm
2W 14/10mm
4W 14/10mm
7W 14/10mm
MB01DB1410
MB02DB1410
MB04DB1410
MB07DB1410
Part Number
Microduct size = 14/10mm Outer diameter/Bore
Description Diameter
(mm)*
Weight
(kg/km)
Installation Tensile
Force (N) (Max)
Min Bend
Radius Installed
(mm)**
Min Bend
Radius
Short Term
(mm)***
14
29.5
35
43.5
72
191
370
615
1010
2020
4040
7070
140
295
350
435
210
442.5
525
652.5
144
Brand-Rex Air Blown Fibre – MicroBloMicroBlo Indoor Protected MicroDucts
A I R B L O W N F I B R E S Y S T E M S
5/3.5mm, 10/8mm and 12/10mm Microducts
1, 2, 4, 7, 12, 19 Multi-Ways
LSHF Microduct & Sheath
Testing to guidelines set in IEC60794-5
PRODUCT DESCRIPTION
Microduct cabling systems are popular
solutions for building flexibility into a network,
they can be populated when needed and
leave spare capacity for future growth.
The ability to defer initial installation costs
is a key advantage of an air blown cable
installation over traditional cable installations.
To facilitate the installation of Microblo
Microcables, a range of Protected Microducts
(multiways) into which Microcables can be
blown are available. The Indoor range of
Protected Microducts are constructed with
Low Smoke Halogen Free microduct which
are sheathed with an overall LSHF protective
layer. This product is ideal for providing
access into a building and can be simply
joined to a DI or DB Microduct to allow the
cable to be blown straight into the building.
PRODUCT PERFORMANCE
Temp - Operational: -40°C to +70°C
Temp - Storage: -40°C to +70°C
Temp - Installation: -10°C to +50°C
LSHF Sheath
Product Data
1W 5/3.5mm
2W 5/3.5mm
4W 5/3.5mm
7W 5/3.5mm
12W 5/3.5mm
19W 5/3.5mm
MB01IN0535
MB02IN0535
MB04IN0535
MB07IN0535
MB12IN0535
MB19IN0535
Part Number
Microduct size = 5/3.5mm Outer diameter/Bore
Description Diameter
(mm)*
Weight
(kg/km)
Installation Tensile
Force (N) (Max)
Min Bend
Radius Installed
(mm)**
Min Bend
Radius Short
Term (mm)***
5
11.5
13.6
16.5
21.5
26.5
10
41
65
109
182
262
100
200
400
700
1200
1900
50
115
136
165
21.5
265
75
172.5
204
247.5
322.5
397.5
1W 10/8mm
2W 10/8mm
4W 10/8mm
7W 10/8mm
12W 10/8mm
MB01IN1008
MB02IN1008
MB04IN1008
MB07IN1008
MB12IN1008
Part Number
Microduct size = 10/8mm Outer diameter/Bore
Description Diameter
(mm)*
Weight
(kg/km)
Installation Tensile
Force (N) (Max)
Min Bend
Radius Installed
(mm)**
Min Bend
Radius Short
Term (mm)***
10
21.5
25.6
31.5
41.5
29
103
182
319
440
280
560
1120
1900
3360
100
215
256
315
415
150
322.5
384
472.5
622.5
1W 12/10mm
2W 12/10mm
4W 12/10mm
7W 12/10mm
MB01IN1210
MB02IN1210
MB04IN1210
MB07IN1210
Part Number
Microduct size = 12/10mm Outer diameter/Bore
Description Diameter
(mm)*
Weight
(kg/km)
Installation Tensile
Force (N) (Max)
Min Bend
Radius Installed
(mm)**
Min Bend
Radius Short
Term (mm)***
12
25.5
30
37.5
40
133
230
376
340
680
1360
2300
120
255
300
375
180
382.5
450
562.5
LSHF Microduct
145
3mm Straight
Connector:
For connecting 2 equal
Straight - Push/Pull
Straight - Screw Retention
End Stop
Connector End Plug
Bulkhead Mounted
Connector
Dust Cap
Gas Blocking ‘T’ Piece
8mm to 5mm Reducer
Standard to Direct Burial
mating connector
Termination Fibre Diverter
8mm to 5mm Stem
Converter
Water Blocking Straight
30-0301-00
-
30-0304-00
-
-
30-0307-05
-
-
-
-
-
-
Connector Type 3/2.1 mm 5/3.5 mm 7/3.5 mm 8/6 mm 10/8 mm 12/8 mm 12/9.4 mm 14/9.4 mm
30-0501-00
30-0502-00
30-0504-00
30-0505-09
30-0506-09
30-0507-05
30-0508-00
30-5801-00
-
-
30-5810-05
30-0503-00
30-0721-00
30-0704-00
30-0707-05
30-5701-00
(7/3.5mm to 5/3.5mm)
-
-
-
30-0801-00
30-0802-00
30-0804-00
30-0805-09
-
30-0807-05
30-0808-00
-
-
30-0809-05
-
-
30-1001-00
-
30-1004-00
-
-
30-1007-05
-
-
-
-
-
30-1003-00
30-1221-00
-
30-1204-00
-
-
30-1207-05
-
-
30-0201-00
(12/8mm to 10/8mm)
-
-
-
301201-00
-
30-1204-00
-
-
30-1207-05
-
-
-
-
-
30-1203-00
30-1421-00
-
30-1404-00
-
-
30-1407-05
-
-
30-2401-00 (14/9.4mm
to 12/9.4mm)
-
-
-
Blolite and MicroBlo microduct connectivity
PRODUCT DESCRIPTION
Within MicroBlo and Blolite a range of plastic bodied pneumatic tube connectors are used for tube routing. The connectors have a variety of forms
and are all rated for the maximum working pressure of 10 Bar. The connectors are installed with a simple push-pull technique and can be re-used
several times.
A I R B L O W N F I B R E S Y S T E M A C C E S S O R I E S
Straight Connector:
For connecting 2 equal
End Plug:
For blocking a straight
connector when a later
connection is required.
Gas Blocking ‘T’:
For use with resin to
provide a gas blocking
seal where required.
8mm - 5mm Reducer:
To reduce from 8mm
- 5mm MicroDuct at
termination point.
Bulkhead Connector:
For attaching a
microduct to a panel
or wall box.
Dust Cap:
For preventing the
ingress of dust during
installation.
Straight Screw Connector:
microducts and eliminating
movement at joint.
End Stop:
For blocking of the end
of a redundant tube or
temporary sealing.
Termination Splitter /
Stem Converter:
For use at the end of
a duct route to divert
fibres into different
termination points.
146
Brand-Rex Air Blown FibreTools
A I R B L O W N F I B R E S Y S T E M A C C E S S O R I E S
Radial Tube Cutter Duct Stripping Tool
4.5mm - 29.00mm
Duct Stripping Tool
19.0mm - 40.00mm
Duct Testing Kit
54-0100-00
54-0201-00
54-0202-00
54-0300-00
50-0506-00
Radial Tube Cutter
Duct Stripping Tool 4.5mm - 29.00mm
Duct Stripping Tool 19.00mm - 40.00mm
Duct Stripping Tool Spare Blades
Duct Testing Kit
Part Number
Product Part Numbering
147
MT Connect is a high performance, pre-
terminated, modular, Optical Fibre cabling
system based on MT ferrule connector
technology. MT ferrule is the building block
of the system, it accommodates up to 12
fibres in a single ferrule. The array is made
of a precision moulded thermoplastic and
uses metal guide pins, precise housing
dimensions and keying to ensure fibre
alignment and maintenance of polarity
when mating. The housing uses a push-pull
latching mechanism, with audible click, to
ensure proper connection.
Our product set may be used in the general
office to speed the installation of backbone
desk or in the datacentre where multiple,
point to point, fibre connections between
distribution racks and equipment racks
can be quickly and efficiently installed,
maintained and changed as required.
The MT Connect system has unique
advantages over conventional optical
fibre cabling:
connector ensure faster installation of
multiple fibre links
pathways and racks giving more space for
air circulation
add and change environment and simple,
fast maintenance and repair
quality assured by factory termination
of connectors
MT Connect is available in OM3, OM4 or OS1
performance grade cabling and comprises a
set of parts which enable any configuration
of link to be simply and quickly built.
M T C O N N E C T P R E T E R M I N AT E D F I B R E S Y S T E M S
148
M T C O N N E C T P R E T E R M I N AT E D F I B R E S Y S T E M S
Operating temperature range (ºC)
Store temperature range (ºC)
-20 to +60
-20 to +60
OM3 performance 50/125 Multimode
OM4 peformance 50/125 Multimode
OS1 Performance Singlemode
Fibre Type & Cable Performance Grade
850
1300
850
1300
1310
1550
wavelength(nm)
3.5
1.5
3.5
1.5
0.5
0.4
Maximum Attenuation
(dB/km)
Typical Cable Attenuation
(dB/km)
2.6
0.6
2.6
0.6
0.3
0.2
(1) angled polish face(2) Durability: <0.3dB change in 500 mating cycles
Multimode
Singlemode
Connector Type
0.35
0.20
0.35
0.20
Insertion Loss (dB) Return Loss (dB)
Typical Maximum Typical Minimum
0.75
0.40
0.50
0.30
25
25
65
65
20
20
55
55
MPO (2)
LC or SC
MPO (1) & (2)
LC or SC (1)
Connector Performance - MT Connect MPO Solution
MT FERRULE TECHNOLOGY
The MT ferrule is the building block of the system, it accommodates up
to 12 fibres in a single ferrule. The array is made of a precision moulded
thermoplastic and uses metal guide pins, precise housing dimensions
and keying to ensure fibre alignment and maintenance of polarity when
mating. The housing uses a push-pull latching mechanism, with audible
click, to ensure proper connection.
Specification and Performance
The MT Connect system is made up of standards compliant component
products which are designed and manufactured to conform to the
requirements of the structured wiring cabling standards ISO/IEC
11801:2002 amendments 1 & 2, EN 50173-1 and TIA 568 and the
datacentre cabling standards EN50173-5, IEC 24764 and TIA 942.
The high quality of the connector system allows multi-connector links
to be configured with the MT Connect set whilst still meeting the
optical budget of high speed applications. MT Connect supports all
of the applications recognised in the standards including Ethernet
and Fibre Channel technologies including 10/40/100GbE speeds.
The micro-distribution cables used in the cable array assemblies
are smaller and lighter than conventional optical cable products
and offer the added benefits of reducing the space taken in pathways,
lightening loads in trays, and minimising the possibility of adversely
affecting cooling under-floor air flows by creating air dams in
cable pathways.
MT Connect MPO System
MT Connect MPO Solution is a high performance, pre-terminated,
modular, Optical Fibre cabling system based on MT ferrule connector
technology.
This product set may be used in the general office to speed the
or in the data centre where multiple, point to point, fibre connections
between distribution racks and equipment racks can be quickly and
efficiently installed, maintained and changed as required.
MT Connect MTP® SuperSet System
MT Connect MTP® SuperSet is an ultra high performance,
pre-terminated, modular, Optical Fibre cabling system based
on MT ferrule connector technology.
The product set is equally suitable for installation in the general
office and the datacentre, however it also offers added optical and
mechanical benefits. The SuperSet improves the link performance by
preserving the signal power through use of low loss, higher precision
connectivity. This higher performance affords designers the flexibility
to incorporate multiple connectors within the system whilst meeting
the demanding optical budget. As a result the MTP SuperSet is ideally
suited to installations where an upgrade path to multi-lane higher
speed transmissions of 40 &100GbE is required. This element of future
proofing is invaluable.
(1) angled polish face
Multimode
Singlemode (1)
Connector Type
0.10
0.10
0.10
0.10
Insertion Loss (dB) Return Loss (dB)
Typical Maximum Typical Minimum
0.35
0.20
0.35
0.20
-
-
-
-
20
20
60
65
MTP® Low Loss
Low Loss LC
MTP® Low Loss
Low loss LC
Connector Performance - MT Connect MTP® Solution
149
1
A
2
3
4
5
6
7
8
9
10
11
12
M T C O N N E C T P R E T E R M I N AT E D F I B R E S Y S T E M S
A – B Cord
1
21
2
Rx
Tx
Type ‘A’ Adaptor
Type ‘A’ TransitionDuplex
Type ‘C’ Array Cable
Simplex
connector 12
Connector
position 1
Connector
position 12
Key down
Pinned Key down Key up
Key up Connector
position 1
Connector
position 12
Connector
position 1
Connector
position 12
Key down
No pins No pins
1a
1b
2a
2b
3a
3b
4a
4b
5a
5b
6a
6b
LGX box or Breakout Assembly Cable Assembly
Rx
Tx
POLARITY
MT Connect uses the TIA568B.1-7:2006 method ‘C’ for both the
multi-mode and single-mode fibre systems.
Method ‘C’ comprises type ‘A’ transitions (breakout assemblies
or LGX boxes), ‘Key up’ to ‘Key down’ adaptors and type ‘C’ cable
assemblies.
This scheme allows the use of standard cross-over patch cords
at both ends of the system for connection to end equipment,
it accomodates low reflectance singlemode and multi-mode
connectors and it uses common transition parts.
For the end user this is the simplest, and most user friendly, polarity
method in the standard. MT Connect is simple to install, operate
and maintain.
The fibre coding scheme within the array cables, and in the
breakout assemblies, is also standard:
Fibre no. 1 2 3 4 5 6 7 8 9 10 11 12
colour Blue Orange Green Brown Grey White Red Black Yellow Violet Pink Aqua
TIA Method C:
Cord Type Cord TypeTransition Method Adaptor MethodAdaptor Method Transition MethodArray Cable Type
A to B A to BAA
‘Key up’ to ‘key down’A
‘Key up’ to ‘key down’AC
‘flipped pairs’
TYPICAL LINK CONFIGURATION
This product set is based on open standards and is compatible and interoperable with other standards compliant MPO connectivity products
which use TIA568 polarity method C.
150
M T C O N N E C T P R E T E R M I N AT E D F I B R E S Y S T E M S
PRODUCT DESCRIPTION
These modular panel assemblies are used to
terminate backbone cables at the distributor or
equipment outlet ends and also to interface to
patch cords or equipment cords.
The 1U panel fits into standard 19” racks and
accommodates up to 4 plug in units. LGX
cassettes, MTP® adaptor plates, LC 24 fibre
faceplates or blanking plates or 5 port Snap-in-
Jack faceplates are available as units.
The 3U panel fits into standard 19” racks and
accommodates up to 288 fibres using up to 12
cassettes to offer a high density solution. The
panel can also accommodate 5 port snap-
in-jack faceplates to offer a versatile hybrid
configuration. Cable management is attached
on to the front of the panel to act as a support
for the cabling with the fixed labelling tray,
located on the front of the panel.
The panels are ideal for data centre installations
where multiple point to point fibre connections
between distribution racks and racks can be
installed, maintained and changed quickly and
efficiently.
The MTP® system is simple and flexible and can
accommodate up to 96 LC connections per U
using LGX cassettes, or up to 288 connections
per U using MTP® adaptor plates.
LGX cassettes are available in high performance
OM3, enhanced OM4 and OS1/OS2 types.
MT Connect MTP® Pre-Terminated Fibre SystemsPanel Assemblies
Product Part Numbers
* The HD 5 Port SIJ Faceplate is not equipped with jacks, to be ordered separately.
19” 1U 4 Module MTP® Panel
19” 3U 12 Module MTP® Panel
24 fibre OM3 Cassette, 24 Low Loss LC’s & 2 pinned MTP Adaptors
24 fibre OM4 Cassette , 24 Low Loss LC’s & 2 pinned MTP Adaptors
24 fibre single mode Cassette
12 fibre OM3 Cassette,12 Low Loss LC’s & 1 pinned MTP Adaptor
12 fibre OM4 Cassette,12 Low Loss LC’s & 1 pinned MTP Adaptor
12 fibre O08/OS2 Cassette,12 Low Loss LC’s & 1 pinned MTP Adaptor
5 Port Snap-in-Jack Faceplate for RJ45 jacks*
6 Way MTP® Adapter Faceplate
Blank Faceplate
24 Fibre LC Adapter Faceplate - SingleMode
24 Fibre LC Adapter Faceplate - MultiMode
Description
MTPHD2
MTPHD3U122
SCAHDTMLCOM3242
SCAHDTMLCOM4242
SCAHDTMLC008242
SCAHDTMLCOM3122
SCAHDTMLCOM4122
SCAHDTMLC008122
MTFHD5SIJ2
STFHDM62
MTFHDBLK2
MTFHDLCSM2
MTFHDLCMM2
Part No.
1
1
1
1
1
1
1
1
10
5
5
5
5
Quantity per pack
5 Port Snap-in-Jack Faceplate Compatibility Chart
Augmented Category 6 Shielded Tool free jack
Category 6 Shielded Tool free jack
Category 6 Unshielded Tool free jack
AC6JAKS000
C6CJAKS000
C6CJAKU002
Description Part No.
151
Part Number Breakdown/example
M T C O N N E C T P R E T E R M I N AT E D F I B R E S Y S T E M S
PRODUCT DESCRIPTION
MTP® Hybrid breakout units are made up of
12 fibres LSZH jacketed cables terminated at
one end in pinned MTP® Low Loss connectors,
through a bifurcation unit, to LC duplex low
loss connectors (high precision SM tolerance
versions) terminated to 2mm OD simplex
cables.
These are used to connect equipment in racks
to MTP® terminated backbone cables.
The assemblies are available in OM3, enhanced
OM4 and OS1/OS2 performance grade.
Breakout Assemblies are also available with
staggered leg lengths for ease of installation
where the legs of the breakout assembly are
tailored to fit; the part number then becomes
a unique reference for the type of breakout
required.
Please see examples on the left for ordering
information.
Ordering Information:
The assemblies are available in standard
lengths of 2 & 3m as standard.
Custom engineered lengths are also available
on request.
The assemblies are delivered as coils.
MT Connect MTP® Pre-Terminated Fibre SystemsBreakout Assemblies
Harness
Type 1
Type 2
FO type
OM4
OM4
Trunk fibres1&2 (mm)
1000
1000
Trunk fibres 3&4 (mm)
1000
1000
Trunk fibres 5&6 (mm)
988
960
Trunk fibres 7&8 (mm)
976
948
Trunk fibres 9&10 (mm)
940
936
Trunk fibres 11&12 (mm)
928
924
Overall length (m)
2.5
2.5
Brand-Rex part no
S TM LC OM4 12 025 T01
S TM LC OM4 12 025 T02
The table below shows 2 examples of specified breakout staggered assemblies:
S= Superset TM = MTP® Low Loss
with pins
LC = LC Duplex with
connector clip OM3 = MM 12 = No. of fibres Overall length
Unique number for
customer specification
breakout cable
OM4 = MM 025 = 2.5m T01 = Type 1
008 = SM 033 = 3.3m etc T01 = Type 2
S TM LC OM3 12 025 T01
152
M T C O N N E C T P R E T E R M I N AT E D F I B R E S Y S T E M S
MT Connect MTP® Pre-Terminated Fibre SystemsCable Assemblies
Cable Assembly Type ‘C’
No pins No pins
Key up
Cable ID label Cable ID label
Key down
PRODUCT DESCRIPTION
Cable assemblies are made up of 12 fibre LSZH
jacketed cables terminated at both ends in
MTP® Low Loss connectors (without pins).
They are ideal for used as back bone or
distribution racks.
The assemblies are available in OM3, enhanced
OM4, and OS1/OS2 to suit the needs of every
network.
Ordering Information:
The cable assemblies are available in standard
lengths of 1, 3, 5, 10, 20, 30, 50 and 100m.
Custom engineered lengths are also available
on request.
The assemblies are delivered as coils in lengths
up to 50m and on reels in lengths over 50m.
Single-mode cables are yellow.
OM3 Multi mode cables are aqua
OM4 Multi mode cables are heather violet
* SMF terminations are angled polished
S T, or
S TM (with pins)
MTP® connector
Compact = C
Cable Type Cable assembly polarity scheme MTP® Low Loss connector Cable performance
CT, or
TM (with pins)
OM3, or
OM4, or
008*
Length (m)No of fibres(1)
12 ZZZ Z
Part Number Breakdown/example
ST C C T OM4 12 0050
Note 1: There are 4 figures at the end of this part number for length. The 4th figure is a decimal.
Note 2: Compact cables are 3mm OD.
Length -0/+20 cm
153
M T C O N N E C T P R E T E R M I N AT E D F I B R E S Y S T E M S
PRODUCT DESCRIPTION
Modular panel assemblies are used to
terminate backbone cables at the distributor or
the equipment outlet ends and also to interface
to patch cords or equipment cords.
The 1U panel fits into standard 19” racks and
accommodates up to 4 plug in units. LGX
boxes, MPO adaptor plates , 5 Port Snap-in-Jack
faceplates and blanking plates are available as
units.
The system is simple and flexible and
accommodates up to 288 fibre terminations
in 1U.
Up to 24 quad LC connections per U can be
provided using LGX boxes. Or, up to 288
connections per U can be achieved using
4 of the 6 way MPO adaptor plates.
The LGX boxes are available in high
performance OM3, OM4 or OS1 (008) types.
MT Connect MPO Pre-Terminated Fibre SystemsPanel Assemblies
19” Panel with four apertures on the front face for clipping in modules, blanks or adaptor plates
19” Panel with twelve apertures in the front face for clipping in modules, blanks or adapter plates
LGX ‘clip in’ module with a pinned MPO at the rear, 12 LCs on the front face, OM3 performance
LGX ‘clip in’ module with 2 pinned MPOs at the rear, 24 LCs on the front face, OM3 performance
LGX ‘clip in’ module with a pinned MPO at the rear, 12 LCs on the front face, OM4 performance
LGX ‘clip in’ module with 2 pinned MPOs at the rear, 24 LCs on the front face, OM4 performance
LGX ‘clip in’ module with a pinned MPO at the rear, 12 LCs on the front face, OS1 performance
LGX ‘clip in’ module with 2 pinned MPOs at the rear, 24 LCs on the front face, OS1 performance
Adaptor Plate - clip in, with 6 ‘type A’ ‘key up’ to ‘key down’ MPO/MTP adaptors
Blanking Plate - clip in, to cover open apertures on the panel front face
5 Port Snap-in-Jack Faceplate for RJ45 Jacks*
Part Number
Product Part Numbering
5 Port Snap-in-Jack Faceplate Compatibility Chart
Augmented Category 6 Shielded Tool free jack
Category 6 Shielded Tool free jack
Category 6 Unshielded Tool free jack
AC6JAKS000
C6CJAKS000
C6CJAKU002
Description Part No.
* Jack Compatible
MTPHD2
MTPHD3U122
MTC AHD ML OM3 122
MTC AHD ML OM3 242
MTC AHD ML OM4 122
MTC AHD ML OM4 242
MTC AHD ML 008 122
MTC AHD ML 008 242
STFHDM62
MTFHDBLK2
MTFHD5SIJ2
154
Product Part Numbering
MPO to LC BreakOut Assembly - OM3 - 2m overall, 1m legs
MPO to LC Breakout Assembly - OM3 - 3m overall, 1m legs
MPO to SC Breakout Assembly - OM3 - 2m overall, 1m legs
MPO to SC Breakout Assembly - OM3 - 3m overall, 1m legs
MPO to LC Breakout Assembly - OM4 - 2m overall, 1m legs
MPO to LC Breakout Assembly - OM4- 3m overall, 1m legs
MPO to SC Breakout Assembly - OM4 - 2m overall, 1m legs
MPO to SC Breakout Assembly - OM4 - 3m overall, 1m legs
MPO to LC Breakout Assembly - OS1 - 2m overall, 1m legs
MPO to LC Breakout Assembly - OS1 - 3m overall, 1m legs
MPO to SC Breakout Assembly - OS1 - 2m overall, 1m legs
MPO to SC Breakout Assembly - OS1 - 3m overall, 1m legs
MTM LC OM3 12 02
MTM LC OM3 12 03
MTM SC OM3 12 02
MTM SC OM3 12 03
MTM LC OM4 12 02
MTM LC OM4 12 03
MTM SC OM4 12 02
MTM SC OM4 12 03
MTM LC 008 12 02
MTM LC 008 12 03
MTM SC 008 12 02
MTM SC 008 12 03
Part Number
M T C O N N E C T P R E T E R M I N AT E D F I B R E S Y S T E M S
PRODUCT DESCRIPTION
MPO hybrid breakout unit is made up a 12 fibre
LSHF jacketed cable terminated at one end in
MPO connectors, through a bifurcation unit, to
SC or LC connectors terminated on 2mm OD
simplex cables.
These are used to connect equipment in racks
to MPO terminated backbone cables.
The assemblies are available in OM3, OM4 or
OS1 (008) performance grade
Ordering Information:
The assemblies are available in standard
lengths of 2m & 3m as standard.
Custom engineered lengths are also available
on request.
The assemblies are delivered as coils.
MT Connect MPO Pre-Terminated Fibre SystemsBreakout Assemblies
MTM
MPO Connector with pins
LC or SC
Duplex Connector Cable performance Number of fibres
‘OM3’, or
‘OM4’, or
or 008
12
Overall length (m)(1)
ZZ
(1) Breakout unit legs are a standard 1m long.
Part Number Breakdown:
155
M T C O N N E C T P R E T E R M I N AT E D F I B R E S Y S T E M S
PRODUCT DESCRIPTION
An MPO cable assembly is made up of 12
fibre LSHF jacketed cable terminated at both
ends in MPO connectors (without pins). These
interconnections between distribution racks.
The assemblies are available in a range of
performance levels (OM3, OM4 or OS1 (008)
types) and in different lengths to suit the needs
of the network.
Ordering Information:
Assemblies are available in standard lengths of
1, 3, 5, 10, 20, 30, 50 and 100m.
Custom engineered lengths are also available
on request.
Assemblies are delivered as coils in lengths up
to 50m long and on reels in lengths over 50m.
Single-mode cables are yellow.
OM3 Multi mode cables are aqua
OM4 Multi mode cables are heather violetMT Connect MPO Pre-Terminated Fibre SystemsCable Assemblies
Product Part Numbering
Cable assembly (LSHF) - OM3 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM3 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM3 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM3 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM3 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM3 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM3 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM3 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM4 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM4 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM4 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM4 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM4 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM4 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM4 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OM4 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OS1 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OS1 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OS1 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OS1 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OS1 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OS1 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OS1 cable terminated in MPOs (no pins)
Cable assembly (LSHF) - OS1 cable terminated in MPOs (no pins)
1
3
5
10
20
30
50
100
1
3
5
10
20
30
50
100
1
3
5
10
20
30
50
100
MT C MT OM3 12 001
MT C MT OM3 12 003
MT C MT OM3 12 005
MT C MT OM3 12 010
MT C MT OM3 12 020
MT C MT OM3 12 030
MT C MT OM3 12 050
MT C MT OM3 12 100
MT C MT OM4 12 001
MT C MT OM4 12 003
MT C MT OM4 12 005
MT C MT OM4 12 010
MT C MT OM4 12 020
MT C MT OM4 12 030
MT C MT OM4 12 050
MT C MT OM4 12 100
MT C MT 008 12 001
MT C MT 008 12 003
MT C MT 008 12 005
MT C MT 008 12 010
MT C MT 008 12 020
MT C MT 008 12 030
MT C MT 008 12 050
MT C MT 008 12 100
Length Part Number
MT
MPO Connector
C = compact cable
Cable type Cable Assembly Cable performance Number of fibres(1)
C
OM3, or
OM4, or
008
12
ZZZ
length (m)
(1) Other numbers of fibres are available on request, e.g. 8 ways. In 8 fibre assemblies fibre positions 1, 2, 3, 4 & 9, 10, 11, 12
are normally terminated in the12 way array connector.
Part Number Breakdown:
156
The Brand-Rex datacentre cabinets and
racks range offers the ultimate solution
for management of fibre and copper in
datacentres and telecoms rooms. The
unique, flexible and effective range is the
ideal solution to support the mission critical
applications of the modern day datacentre.
These ground breaking solutions have been
designed, in conjunction with customers,
with an emphasis on minimising on-site
installation times, improving accessibility
to cabling and to providing modularity to
enhance the overall operational flexibility.
The High Density Solutions are designed to
solve the problems of today’s networking
environment, providing unique working
and cabling accessibility to completely
transform cabinet installation layouts,
onsite installation and on-going system
management.
D ATA C E N T R E C A B I N E T S A N D R A C K S
157
434500434
20
35
21
33
900
D ATA C E N T R E C A B I N E T S A N D R A C K S
Brand-Rex Datacentre Cabinets and RacksHigh Density Fibre Management Cabinet
Up to 912 Duplex ports in a 900mm (W)
x 500mm (D) footprint, 45U Frame.
Easy patching access reduces installation time.
Maximises useable space and minimise
footprint.
Open construction for ease of cross-patching.
Minimum bend radius maintained
throughout system.
Unique manifold and duct routing system
which allows easy installation of cables.
PRODUCT DESCRIPTION
The Brand-Rex High Density Fibre Cabinet and
Panel offers the ultimate solution for management
of fibre in datacentres and telecoms rooms.
The solution is designed with an emphasis on
minimising on-site installation times, accessibility
to cabling and modularity to enhance its
operational flexibility. The cabinet is the first
fibre cabinet designed to solve the problems
of today’s networking environment. It provides
unique working and cabling accessibility to totally
transform cabinet installation layouts, onsite
installation and on-going system management.
PRODUCT CHARACTERISTICS
Applications
Installation
Brand–Rex Fibre patch panels, patch cords
and cable management products.
MECHANICAL SPECIFICATIONS
Dimensions / Weight
top and side panels, without fibre
Part NumberDescription
Full assembled racks including all panels and part no’s (loaded and part loaded)
Product Part Numbering
For corresponding High Density Fibre
Management Panel please see page 12
158
Brand-Rex Datacentre Cabinets and RacksHigh Density Fibre Management Cabinet
Individual parts and accessories
Bolt Together Kit
DRCKITBB001
DRCKITBT001
DRCKITCN001
DRCFGT002
DRCFGB002
DRCFMDC002
DRCFMD002
DRCFCHS002
DRCFCS002
DRCFCHB002
20-0118-00
D ATA C E N T R E C A B I N E T S A N D R A C K S
159
434500434
20
35
Brand-Rex Datacentre Cabinets and RacksHigh Density Copper Cabling Cabinet
D ATA C E N T R E C A B I N E T S A N D R A C K S
Reduced installation time
Network installations made easy
Maximising useable space and
minimise footprint
Totally open constructions for ease
of cross-patching
Flexible configuration
Enhanced thermal management
PRODUCT DESCRIPTION
The High Density Cabling Cabinet offers the
ultimate solution for management of cross-
connect cabling in datacentres and telecoms
rooms. The cabinet offers the ability to create a
preferred enclosure design configuration that
fits the needs of today’s working environment.
To tailor a solution to your requirements simply
begin with the basic frame and subsequently
add doors, side panels and top panels as
required. The range also has a comprehensive
array of accessories to suit all applications. If you
have any problems please contact our expert
customer service team for technical assistance.
PRODUCT CHARACTERISTICS
Applications
Installation
Copper and Fibre Patch cords, panels and
cable management products
MECHANICAL SPECIFICATIONS
Dimensions / Weight
160
Brand-Rex Datacentre Cabinets and RacksHigh Density Copper Cabling Cabinet
HDC Back to Back Baying Bracket
1 x Earth Kit
HDC, 2 Bay Back to Back Computer Floor Plinth
Bolt Together Kit
DRCKITBB001
DRCKITER001
DRCACCCM001
DRCFPBB152
DRCKITBT001
DRCFANTP0209AS2
DRCACCCM002
DRCKITCN001
Product Part Numbering
D ATA C E N T R E C A B I N E T S A N D R A C K S
161
2000
Brand-Rex Datacentre Cabinets and RacksHigh Density Distribution Equipment Rack
D ATA C E N T R E C A B I N E T S A N D R A C K S
Reduced installation time
Network installations made easy
Maximising useable space and
minimise footprint
Totally open constructions for ease
of cross-patching
Flexible configuration
Enhanced thermal management
PRODUCT DESCRIPTION
provides increased accessibility and has
a flexible modular design that can be
configured to suit small, corporate and
internet datacentres. The DER set can be
configured as an open frame to manage
the cabling at the distributors or as a closed
cabinet to safely secure servers and storage
equipment. The designs are modular and
flexible.
The logic of the modular, flexible systems
are the key benefits of this best in class
cable and equipment management system
range. Features also include vented and glass
door options, side panels and top panels
with cable access. These Cabinets have an
unparalleled level of flexibility, providing the
end user with the right cabinet for the right
application.
PRODUCT CHARACTERISTICS
Applications
Installation
Copper and Fibre Patch cords, panels and
cable management products
MECHANICAL SPECIFICATIONS:
Dimensions / Weight
162
Fan tray lead 13 AMP
Fan tray lead IEC
Fan tray lead Schuko
DER, Standard Plinth Kit, 800 x 1000mm
DER, Standard Plinth Kit, 800 x 1200mm
1 x Earth Kit
1 x Heavy Duty Castor Kit
Bolt Together Kit
DRCFANTP0208AS2
DRCSPK0808
DRCSPK0810
DRCSPK0812
DRCKITER001
DRCKITCH001
DRCACCCM001
DRCACCCM002
DRCKITBT001
Catalogue Number
Brand-Rex Datacentre Cabinets and Racks
Product Part Numbering
D ATA C E N T R E C A B I N E T S A N D R A C K S
163
D ATA C E N T R E C A B I N E T S A N D R A C K S
19’’ Finger Cable Management Bar
Cable Management Spools
Product Part Numbering
Catalogue Number
Reduced installation time
Network installations made easy
Maximising useable space and
minimise footprint
Totally open constructions for ease
of cross-patching
Flexible configuration
Standard cage nut fixings
Size options include 30U and 45U
PRODUCT DESCRIPTION
modular and easy-to-install system that can
also be applied to small, corporate and internet
datacentre environments. It can be used stand-
alone or in multiples. It is an ideal solution for
the main distribution area.The modular and
options and solutions to deal with issues of cable
access and routing that are common to today’s
high data rate networks and high performance
cabling. It offers the user a simple, modular and
easy-to-install system featuring smart, effective
cable management options and built-in flexibility
to cope with copper or optical cabling.
The combination of completely interchangeable
cable retention gates, doors, fingers and
to adapt his or her own specific needs.
Also, reconfiguration and modification of the
choice for cable management needs now, and in
the future.
MECHANICAL SPECIFICATIONS
Dimensions & Weight
PRODUCT CHARACTERISTICS
Applications & Installation
copper and fibre patch cords, panels and cable
management products
Brand-Rex Datacentre Cabinets and Racks
DRCACCCMS001
164
In today’s world of high speed connectivity
the importance of 100% availability of IT
services is business critical. The introduction
of best practice standards for IT Service
Management has set the benchmark as IT
global standard for IT Service Management.
At the core of an IT Service Management
framework are the configuration, change
and incident management processes. The
accuracy and quality of the information
contained within the main configuration
in ensuring the effectiveness, efficiency
and quality of all associated IT Service
Management processes.
Traditionally, configuration management
is one of the most difficult disciplines
to implement due to the manual effort
needed to maintain accurate records of the
constant changes to the IT infrastructure.
The management of changes is also highly
critical, as service delivery managers must
know the exact implications of carrying out
any changes before they take place.
Creating such systems and processes based
upon a traditionally managed cabling
infrastructure is an almost impossible task.
The Brand-Rex Intelligent Infrastructure
Solution, SmartPatch , a highly advanced
overlay system allows network managers
the opportunity to have real time visibility
of network connectivity and utilisation.
The system provides simple and controlled
management and recording of common
network changes such as those forced
by office moves and terminal additions.
SmartPatch also gives multi-site businesses
the tools to effectively monitor and manage
all sites from a central location.
165
What is SmartPatch?
SmartPatch is a highly advanced overlay system that allows network
managers the opportunity to have real time visibility of network
connectivity and utilisation. The system provides simple and
controlled management and recording of common network changes
such as those forced by office moves and terminal additions.
Referred to as an Intelligent Infrastructure Management System
effectively monitor and manage all sites from a central location.
The Solution
By adopting Intelligent Infrastructure Management tools as a key
part of an IT Service Management strategy, IT Managers can create
an infrastructure platform capable of addressing these problems.
The ultimate goal is the provision of a 100% accurate, real-time,
trusted source of connectivity and asset information that can be
incorporated within the core CMDB, and that can be utilised to
enhance all associated IT service management tools and processes.
Any physical additions or changes to the network configuration
are quickly and accurately planned and executed before being
automatically updated and reflected across all management
processes, thereby optimising process efficiency and aiding
communication and co-ordination between work-streams.
can be instantaneously identified and forwarded to the appropriate
service management tool or team for rectification
The most significant benefits of the system may be
summarised as:
Intelligent Infrastructure Management in the office
and in the datacentre
must be allocated to accommodate new application servers.
Planning of multiple cable routes is the most time consuming
element of the commissioning process and one that is highly
susceptible to error, this also extends into the standard office
environment. Commissioning a new, or moving an existing,
workstation requires significant time and resources to effectively
route the required services to the appropriate desktop location.
Prior to the introduction of IIM, the planning of service routing
and the subsequent creation of the resulting work orders was a
long and complex manual process. Adopting an IIM solution can
allow IT managers to simultaneously manage power, cooling and
environmental management applications along with space and
weight capacities to optimise the process of designing changes.
SmartPatch – the Smart Choice
SmartPatch is the market leading IIM solution, it provides an
auto-routing capability within its work order management function
that automatically designs routes for the required services to the
necessary location via the most efficient and effective cable links
available. The work orders required to execute the activity are
systematically created, issued and managed by the SmartPatch
system. Any actions that do not adhere 100% to the work order
are instantaneously identified and rectified if required.
a standard office environment could improve change efficiency
has been proven to reduce server service provisioning times by up
to 80% whilst simultaneously reducing the number of incidents
caused by poorly executed change. If incidents occur SmartPatch can
Successful adoption of IT Service management is critically
dependant on a trusted source of documentation.
Many organisations currently rely on tribal knowledge and/or
numerous sets of spreadsheets, diagrams, whiteboards, post-it
notes and the memory of long-serving individuals to document
the elements of their physical infrastructure. These methods are no
longer acceptable means of managing the IT infrastructure for those
organisations that are serious about IT service management.
Principles of Operation
SmartPatch uses a combination of software and hardware to
monitor and manage physical network connections. A topology of
scanners and intelligent patch panels, send and receive connectivity
application, providing real-time data and automatically updated
records. The software element of Smartpatch not only allows
the monitoring and management of physical connectivity, the
availability of a fully developed SDK means that the benefits of
accurate, real time information can also be integrated into most
commonly available network, facilities, configuration and helpdesk
management applications.
166
A group of components designed to capture
physical connectivity information from
the patch panels and feed it into the SP4E
application and to communicate patching
guidance information from the application
to the panels. All units are 19"
offering a robust, compact, high density
scanning topology solution, with very low
power requirements and thermal output. This
system offers full scaleability from as few as 12
panels to massive comms rooms with no upper
limit to the size of the patching zone.
PRODUCT DESCRIPTIONS
SPMax Master collects and transmits
connectivity information between scanners
and the application. It can control multiple
comms rooms, includes an SNMP agent
and manages the scanning algorithm.
SPMax Expander is used to multiply the
capacity of a master allowing upto eight
scanners to communicate with a single master
port. Expanders may be stacked
to allow further expansion.
SPMax Master Expander is used as the
primary point of communication between the
application and a single, large comms room
such as a datacentre and may be connected to
further Expanders.
SPMax Scanners connect directly to the
copper and fibre patch panels and report either
directly to a Master or via Expansion. Scanners
monitor upto 24 panels and Mini Scanners
upto 12 panels.
SPMax Local Master is designed to monitor
small groups of panels, usually in remote
locations. It monitors upto 12 or 24 panels and
can communicate directly to the application
SPMax Indicator Controller controls the Rack
It is connected to the SmartPatch system
via an Expander port.
SPMax Security Controller controls up
to eight Indicators and also has the capacity
to control and monitor external devices
and sensors, up to a total of 32 devices.
Catalogue Number
SmartPatch SPMax Master 4 ports
SmartPatch SPMax Master Expander
SmartPatch SPMax Expander
SmartPatch SPMax Scanner
SmartPatch SPMax Mini Scanner
SmartPatch SPMax Splitter
SmartPatch SPMax Security Controller
SmartPatch SPMax Indicator Controller
SmartPatch Rack Indicator
SPMax Control Pad
Product Part Numbering
Brand-Rex Intelligent Infrastructure Management SolutionsSmartPatch SPMax Scanning Hardware
167
PRODUCT DESCRIPTION
SmartPatch Copper Patch Panels are fully
compliant with the perfomance requirements
and are incorporated into the Brand-Rex
25 year warranty scheme.
Each panel is equipped with extra pins,
to allow the monitoring and recording
of patching status. This information is
communicated back to the server via scanner
attachment cords to the scanner system and
are used to trace connectivity or to offer
patching guidance to the engineer.
Note - When ordering panels it is important
to note the type of scanner attachment cord
required.
Brand-Rex Intelligent Infrastructure Management SolutionsSmartPatch Copper Patch Panels
Catalogue Number
SPV110CB4PR
Scanner Sockets
1 x B
2 x B
1 x B
1 x B
1 x B
1 x B
1 x B
1 x B
2 x B
-
-
UTP Panels Cat6
UTP Panels Cat6A
STP Panels Cat6
STP Panels Cat6A
Snap-In Panels
110 Voice Blocks
SmartPatch Voice Block 110, 24, SPMax
SmartPatch Voice Block 110, 48, SPMax
SmartPatch 110 Connector Block, 4 Pairs
Product Part Numbering
168
PRODUCT DESCRIPTION
SmartPatch Cords are designed specifically
for use with Smart panels. They comprise of a
flexible 9 wire cable construction terminated
additional wire and pins, located outside
the standard 8 pins, are used to detect the
patching position of the cord.
Cords for the snap-in or retrofit solutions also
utilise an external blade in addition to the 9th
pin to make contact with the smart tabs on
the panel.
Part No.
SP1V1010PC010400
SP1V1010PC020400
SP1V1010PC030400
SP1V1010PC050400
SP2V1010PC010400
SP2V1010PC020400
SP2V1010PC030400
SP2V1010PC050400
UTP Patch cords Cat6
UTP Patch cords Cat6A
STP Patch cords Cat6
STP Patch cords Cat6A
Retrofit (Snap-in) Patch cords Cat6A
110 Cross-Connect Cords
SmartPatch 110 - 110, 1 Pair cord 1.0m
SmartPatch 110 - 110, 1 Pair cord 2.0m
SmartPatch 110 - 110, 1 Pair cord 3.0m
SmartPatch 110 - 110, 1 Pair cord 5.0m
SmartPatch 110 - 110, 2 Pair cord 1.0m
SmartPatch 110 - 110, 2 Pair cord 2.0m
SmartPatch 110 - 110, 2 Pair cord 3.0m
SmartPatch 110 - 110, 2 Pair cord 5.0m
Brand-Rex Intelligent Infrastructure Management SolutionsSmartPatch Copper Patch Cords
169
Scanner Sockets
1 x B
1 x B
2 x B
-
-
2 x B
-
-
1 x A
1 x A
1 x A
-
-
-
-
-
-
Catalogue Number
SPFPPCM1MM48DC2
SPFPPCM1SM48DC2
SPFPPCM1SMA48DC2
LC Fibre Patch Panels
SmartPatch LC - LC Cassette
SmartPatch LC - MPO Cassette
SC Fibre Patch Panels
Fibre Accessories
Cable Ground Kit
Cable Entry Panel Kit
Protection Sleeve Holder
Product Part Numbering
Brand-Rex Intelligent Infrastructure Management SolutionsSmartPatch Fibre Patch Panels
PRODUCT DESCRIPTION
SmartPatch Fibre panels are fully compliant
with the perfomance requirements of the
latest standards and are incorporated into
the Brand-Rex 25 year warranty scheme.
Each panel is equipped with extra pins,
to allow the monitoring and recording
of patching status. This information is
communicated back to the server via
scanner attachment cords to the scanner
each port are used to trace connectivity or
to offer patching guidance to the engineer.
Note - When ordering panels it is important to note
the type of scanner attachment cord required.
170
Catalogue Number
SPFPCSCSM010SC2
SPFPCSCSM020SC2
SPFPCSCSM030SC2
SPFPCSCSM050SC2
LC Patch cords
SC Patch cords
Product Part Numbering
Brand-Rex Intelligent Infrastructure Management SolutionsSmartPatch Fibre Patch Cords
PRODUCT DESCRIPTION
designed for use on SmartPatch installations.
They comprise, in all variants, two tight buffer
housed within a common outer jacket. Patch
mode and single-mode variants. Both ends are
terminated with a high performance hybrid
duplex fibre optic connector and a spring-
loaded electrical contact housed within a
common plastic shell.
171
Catalogue Number
SPAACA015RD
SPAACA025RD
SPAACA120RD
SPAACB015RD
SPAACB025RD
SPAACB040RD
SPAACB120RD
Attachment cord 1.5m round Group A
Attachment cord 2.5m round Group A
Attachment cord 12m round Group A
Attachment cord 1.5m round Group B
Attachment cord 2.5m round Group B
Attachment cord 4m round Group B
Attachment cord 12m round Group B
Product Part Numbering
Brand-Rex Intelligent Infrastructure Management SolutionsSmartPatch Components
SPMax Splitter
scanning hardware, ensuring full utilisation
of the SPMax topology.
Scanner Attachment Cords
Scanner connection cables are used to connect
scanner. Cords are available in both flat and
round configurations in various lengths up to
panel layouts.
The variety of lengths available add flexibility
to the design possibilities using SmartPatch
panels, multiple panels in distributed racks
may be monitored by a single scanner,
allowing for simplified designs and reduced
power requirements.
172
SmartPatch for the Enterprise (SP4E) v6.0
infrastructure management software package. It is designed
to bring a traditionally inert network infrastructure under
control and align it to other processes within the IT function,
particularly in terms of history and accountability. It does
this by providing real-time end-to-end physical connectivity
information and making it possible to monitor and maintain
a database of the IT infrastructure from any remote
location. SP4E allows the enterprise to automate network
documentation and maintenance procedures whilst constantly
providing real-time updates to the database.
How Does it Work?
relational database and works in combination via standard
System Administrator is provided with a real-time view of the
physical layer, including a combined view of the horizontal
and vertical sub-systems. A combination of graphics and real-
time information assist the Administrator in making critical
enterprise. These decisions are made for the daily maintenance
of the system, network troubleshooting and documentation
procedures. SP4E updates the network database to reflect the
MAC and IP details of network devices, as well as their physical
location in the network.
all software configurations removing the requirement for a
separate CAD module.
application is the Provisioning module. This module
allows users to implement individual MACs, departmental
reorganisations or even server deployments simply and
efficiently whilst adhering to user defined policies with simple
drag-and-drop operations.
Recommended
4 GB
Recommended
1 GB
Intel® Pentium® processor, >1.0GHz
Memory
Processor
Free Disk Space
Display
Networking
Additional Software
Client
Memory
Processor
Additional Software
Server
Brand-Rex SmartPatchSoftware
173
To match client requirements, SP4E is now available in 3 standard
packages which may be enhanced with any of a range of
additional modules.
Contents of each of the packages are as follows:
Core -
Standard -
Advanced -
OPTIONAL MODULES
Provisioning Module – enables a user to assign system resources
and privileges in a fully automated environment. Significantly
improves the planning and provisioning process, including
workspace environments. The module also enables users to
incorporate their proprietary rules.
Report Centre – Can be ordered for additional users.
PBX Module
and the telephone end device.
Cable Test Results Module – contains data for link and channel
electrical cable tests for each port. Includes an option to view results
SitePro
via PDA.
SDK Developer – enables developers to integrate SP4E into 3rd
party or legacy applications.
SDK Runtime – enables customers to extend SP4E’s capabilities
throughout their organisation by integrating it with 3rd party or
legacy applications.
SiteBuilder – an Excel based utility that offers an alternative way
of uploading large amounts of SP4E related information onto the
SP4E database.
Additional Ports / Upgrades
The modular nature of the application means that it can be simply
upgraded to the latest version and can easily be scaled up to reflect
the changing size of the network.
Software Support
Support contracts are available in both update and upgrade
versions, offering in addition to helpline and troubleshooting,
free fixes, enhancements updates and/or version upgrades.
Packages
SP4E Core
SP4E Standard
SP4E Advanced
Modules
SP4E Discovery Module
SP4E Provisioning Module
SP4E Cable Test Results Module
SP4E SDK Runtime
Additional Ports
Demo License
Report Centre License
SiteBuilder License
SiteBuilder 2.5
Switch Driver
SP4E Customization for a new switch driver
Dashboard
SitePro License
SDK Developer
SDK Developer
Software Support Agreement
Basic Software Support Agreement
Premium Software Support Agreement
Part No.
SPASREPCADD
SPASDASH2-2
SPASSDKDEV
Software
174
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
176
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
.....................................................................................................................................................................................................................................................................................................................................................................................................
www.brand-rex.com
brand-rex head officeviewfield industrial estate
glenrothes, fifeKY6 2RS
united kingdom
tel: +44 (0) 1592 772124 fax: +44 (0) 1592 775314
brand-rex asia pacific17/F prosperity centre
77-81 container port roadkwai chunghong kong
tel: +852 3620 2602 fax: +852 3621 0018
brand-rex central and eastern europe
tel: +420 222 363 657
brand-rex france120, rue jean jaurès
92 300 levallois perretfrance
tel: +33 (0) 1 70 98 78 25 fax: +33 (0) 1 70 98 78 36
brand-rex gmbhstorkower str.115
10407 berlingermany
tel: +49 (0) 30-290278-399 fax: +49 (0) 30-290278-397
brand-rex IMEAaspect tower - business bay
office No. 2206 zone bPO Box 123908
dubai united arab emirates
tel: +971 4 454 8644 fax: +971 4 451 8660
brand-rex milan via giovanni da udine, 34
20156 milano italy
tel: +39 02 3809 3711 fax: +39 02 30412014
brand-rex london72 cannon street
londonEC4N 6AE
united kingdom
tel: +44 (0) 207 489 7637 fax: +44 (0) 207 113 2239
brand-rex rome viale di trastevere, 248
00153 romaitaly
tel: +39 06 8360 0665
brand-rex nordic tel: +46 (0)704 621 950
brand-rex portugallagoas park edifício 8 – piso 0
2740-244 porto salvoportugal
tel: +351 21 421 4133 fax: +351 21 421 4135
brand-rex spainavda puente cultural
10 edif a, pt 1 puerta 1 28702 san sebastián de los reyes
spain
tel: +34 914 905 919 fax: +34 916 573 331
brand-rex speciality cabling solutions
west bridgewater streetleigh, lancashire
WN7 4HBunited kingdom
tel: +44 (0) 1942 265500 fax: +44 (0) 1942 265576
L i t e r a t u r e R e f : s t r u c t u r e d c a b l i n g s y s t e m s 0 3 / 1 3
The information contained in this document is valid and correct at the time of
issue. However, we reserve the right to modify details without notice in the light of
subsequent Standard / Specification changes and ongoing technical developments.
© Brand-Rex Limited 2013