15
Advanced Chemistry Thermochemistry © 2017 Supercharged Science www.ScienceLearningSpace.com 1 Student Worksheet for Thermochemistry Attempt to work the following practice problems after working through the sample problems in the videos. Answers are given on the last page(s). Relevant Equations/Information Specific Heat: Q=mc∆T T= Final Temperature - Initial Temperature Where Q= Energy in J, m= mass in grams, c= Specific Heat in J/g˚C, and T= ˚C Hess’ Law: H = ∑ of H (energy) absorbed and released by all reactions/bonds broken or made - Can also be calculated as H = H products H reactants Influence of ∆H on Reaction Type (see energy diagram below) - Negative ∆H= Exothermic Reaction (releases energy into the surroundings) - Positive ∆H= Endothermic Reaction (requires energy to be put in before it can proceed) Endothermic Reaction Exothermic Reaction Hints for using H to determine endothermic versus exothermic reactions. The interpretation of the H value depends on how it is used. For examples: a) In your video, you are only looking at the H value of the bonds. Thus, if the reactants have more energy than the products (a + H), energy was added to the system (left graph above) and is endothermic. b) When using Hess’ law, you are looking at the amount of energy released and absorbed for the entire molecule (not individual bonds). This is also known as H f . Breaking a bond absorbs energy, and making a bond releases energy. Consider the following equation and scenario: A + B C

Student Worksheet for Thermochemistry · 2018. 6. 6. · conserved. When C is formed, it uses 5 kJ of energy. This leaves 5 kJ of energy (such as heat) still in the surroundings

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 1

    Student Worksheet for Thermochemistry

    Attempt to work the following practice problems after working through the sample problems in

    the videos. Answers are given on the last page(s).

    Relevant Equations/Information

    Specific Heat: Q=mc∆T

    ∆T= Final Temperature - Initial Temperature

    Where Q= Energy in J, m= mass in grams, c= Specific Heat in J/g˚C, and T= ˚C

    Hess’ Law: H = ∑ of H (energy) absorbed and released by all reactions/bonds broken or made

    - Can also be calculated as ∆H = ∑ Hproducts – ∑ Hreactants

    Influence of ∆H on Reaction Type (see energy diagram below)

    - Negative ∆H= Exothermic Reaction (releases energy into the surroundings)

    - Positive ∆H= Endothermic Reaction (requires energy to be put in before it can proceed)

    Endothermic Reaction Exothermic Reaction

    Hints for using H to determine endothermic versus exothermic reactions.

    The interpretation of the H value depends on how it is used. For examples:

    a) In your video, you are only looking at the H value of the bonds. Thus, if the reactants

    have more energy than the products (a + H), energy was added to the system (left

    graph above) and is endothermic.

    b) When using Hess’ law, you are looking at the amount of energy released and

    absorbed for the entire molecule (not individual bonds). This is also known as Hf.

    Breaking a bond absorbs energy, and making a bond releases energy. Consider the

    following equation and scenario:

    A + B C

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 2

    If 10 kJ (total) of energy are absorbed to break the bonds in Molecules A & B, the 10

    kJ are now available for the formation of molecule C. Remember that energy is

    conserved. When C is formed, it uses 5 kJ of energy. This leaves 5 kJ of energy (such

    as heat) still in the surroundings. Using Hess’ Law to determine if the reaction is

    endothermic or exothermic,

    - ∆H = ∑ Hproducts – ∑ Hreactants

    - ∆H = 5 kJ – 10 kJ = -5 kJ of energy are released (making it exothermic) like the right

    graph above.

    c) Atoms in their elemental form (O2, H2, C, etc) have an Enthalpy of formation

    equal to 0 kJ/mol.

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 3

    1. Gold has a specific heat of 0.129 J/g°C. How many joules of heat energy are required to raise

    the temperature of 40 grams of gold from 20°C to 70°C?

    2. An unknown substance with an unknown mass absorbs 1500J while undergoing a temperature

    increase of 30°C. It’s specific heat is 0.49 J/g°C. What is the mass of the substance?

    3. If the temperature of 50.1 g of ethanol increases from 35°C to 87.8°C, how much heat has

    been absorbed by the ethanol? The specific heat of ethanol is 2.44J/g°C.

    4. If 425 g of water at 75°C loses 6570 J of heat, what is the final temperature of the water?

    Liquid water has a specific heat of 4.18 J/g°C.

    5. Tea or coffee is drank in cold weather because it warms us. The beverage is 40°C and the

    body is normally 37.2°C, but warms to 39°C after consumption. If you drink a cup of tea with a

    mass of 300g of water, how much heat energy was transferred to the body? The specific heat of

    water is 4.184J/g°C.

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 4

    6. When testing to see if a solid is pure Titanium, the temperature is raised from 25˚C to 57˚C

    after the absorption of 154.2 J of heat. If the mass of the solid is 2.7 g and the specific heat of

    Titanium is known to be 0.54 J/g˚C. What is the specific heat of the solid and is it pure

    Titanium?

    For questions 7-11, use the bond energies provided to classify them as Endothermic or

    Exothermic.

    7.

    Bond Energy per Bond (kJ per mole)

    H-H 432

    O-O 204

    O-H 467

    2 H2 + O2 2 H2O

    8.

    Bond Energy per Bond (kJ per mole)

    C-H 413

    N-H 391

    C-N 305

    H-H 432

    CH4 + NH3 CH3NH2 + H2

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 5

    9.

    Bond Energy per Bond (kJ per mole)

    H-Cl 427

    S-Cl 271

    H-S 347

    Cl-Cl 243

    2 HCl + SCl2 H2S + 2 Cl2

    10.

    Bond Energy per Bond (kJ per mole)

    N-N 160

    H-H 432

    N-H 391

    N2 + 3 H2 2 NH3

    11.

    Bond Energy per Bond (kJ per mole)

    C-Cl 339

    O-H 467

    H-Cl 427

    C-O 358

    CHCl3 + H2O HCl + CHCl2OH

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 6

    For questions 12-15, use the Enthalpy formations provided and Hess’ Law to classify them as

    Endothermic or Exothermic.

    12.

    Molecule Hformation (kJ)

    H2O -286

    CO -111

    H2 0

    CO2 -394

    H2O (l) + CO (g) H2 (g) + CO2 (g)

    13.

    Molecule Hformation (kJ)

    NH3 -368

    N2O4 27

    N2 0

    H2O -242

    8 NH3 (g) + 3 N2O4 (g) 7 N2 (g) + 12 H2O (g)

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 7

    14.

    Molecule Hformation (kJ)

    Fe 0

    O2 0

    Fe2O3 -824

    4 Fe (s) + 3 O2 (g) 2 Fe2O3 (s)

    15.

    Molecule Hformation (kJ)

    CaO -635

    CO2 -394

    CaCO3 -1,207

    CaO (s) + CO2 (g) CaCO3 (s)

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 8

    1. Gold has a specific heat of 0.129 J/g°C. How many joules of heat energy are required to raise

    the temperature of 40 grams of gold from 20°C to 70°C?

    Q = mc∆T You are solving for Q

    = 40*0.129*(70-20)

    = 40*0.129*50

    = 258 J of energy was absorbed

    2. An unknown substance with an unknown mass absorbs 1500J while undergoing a temperature

    increase of 30°C. It’s specific heat is 0.49 J/g°C. What is the mass of the substance?

    Q = mc∆T You are solving for m.

    m = 𝑄

    𝑐∆𝑇

    = 1500

    (0.49∗30)

    = 102 grams

    3. If the temperature of 50.1 g of ethanol increases from 35°C to 87.8°C, how much heat energy

    has been absorbed by the ethanol? The specific heat of ethanol is 2.44J/g°C.

    Q = mc∆T You are solving for Q

    = 50.1*2.44*(87.8-35)

    = 50.1*2.44*52.8

    = 6,454.5 J or ~6.5 kJ of energy was absorbed

    4. If 425 g of water at 75°C loses 6570 J of heat, what is the final temperature of the water?

    Liquid water has a specific heat of 4.18 J/g°C.

    This one is a little different because you are not solving for an entire variable of the specific heat

    equation. Instead, you are solving for the final temperature in the ∆T equation. NOTE: The water

    is losing (has less) heat, so a negative sign goes in front of the Q value. There are two ways to

    approach this problem, depending on which method you are most comfortable with.

    Option A:

    Q = mc∆T

    ∆T = 𝑄

    𝑚𝑐

    = −6570

    (425∗4.184)

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 9

    = −6570

    1778.2

    = -3.69 ˚C

    The problem tells you that the initial temperature was 75 ˚C. To solve for the final temperature,

    ∆T = Final Temperature-Initial Temperature

    - 3.69 ˚C = Final Temperature – 75 ˚C (Add 75 ˚C to both sides)

    71.31 ˚C= Final Temperature

    Option B:

    Q = mc(Final T- Initial T) Minor manipulation of the equation

    Final T- Initial T= 𝑄

    𝑚𝑐 Add Initial T to both sides

    Final T= 𝑄

    𝑚𝑐 + Initial T

    = −6570

    (425∗4.184) + 75 ˚C

    = -3.69 ˚C + 75 ˚C

    = 71.31 ˚C

    5. Tea or coffee is drank in cold weather because it warms us. The beverage is 40°C and the

    body is normally 37.2°C, but warms to 39°C after consumption. If you drink a cup of tea with a

    mass of 300g of water, how much heat energy was transferred to the body? The specific heat of

    water is 4.184J/g°C.

    Q = mc∆T You are solving for Q

    Q = 300*4.184*(39-37.2)

    = 300*4.184*1.8

    = 2,259.4 J or 2.26 kJ of energy was absorbed

    6. When testing to see if a solid is pure Titanium, the temperature is raised from 25˚C to 57˚C

    after the absorption of 154.2 J of heat. If the mass of the solid is 2.7 g and the specific heat of

    Titanium is known to be 0.54 J/g˚C. What is the specific heat of the solid and is it pure

    Titanium?

    Q = mc∆T You are solving for c

    c= 𝑄

    𝑚∆𝑇 =

    154.2

    (2.7∗32) =

    154.2

    86.4 = 1.78 J/g˚C

    Because Titanium has a heat capacity of 0.54 and the solid has a c of 1.78, it is NOT Titanium.

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 10

    For questions 7-11, use the bond energies provided to classify them as Endothermic or

    Exothermic.

    7.

    Bond Energy per Bond (kJ per mole)

    H-H 432

    O-O 204

    O-H 467

    2 H2 + O2 2 H2O

    Reactants

    Bond Number of Bonds/Coefficient Bond Energy (each) Total Energy

    H2 2 432 864

    O2 1 204 204

    Total 1,068 kJ

    Products

    Bond Number of Bonds/Coefficient Bond Energy (each) Total Energy

    OH 4 467 1,868

    Total 1,868 kJ

    1,068 kJ – 1,868 kJ= -800 kJ = Exothermic

    Note: You should recognize this problem from the end of the video. In the video, the reaction

    proceeded in the reverse direction. It is important to recognize that if a reaction is endothermic in

    one direction, it is always exothermic in the opposite direction.

    8.

    Bond Energy per Bond (kJ per mole)

    C-H 413

    N-H 391

    C-N 305

    H-H 432

    CH4 + NH3 CH3NH2 + H2

    Reactants

    Bond Number of Bonds/Coefficient Bond Energy (each) Total Energy

    CH 1 413 413

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 11

    NH 1 391 391

    Total 804

    Products

    Bond Number of Bonds/Coefficient Bond Energy (each) Total Energy

    CN 1 305 305

    H2 1 432 432

    Total 737

    804 kJ- 737 kJ= + 67 kJ = Endothermic

    Note: In this example, there are 4 CH bonds, but when reviewing the equation, only 1

    participates in the reaction. Hence, you could have accounted for them all (as well as all 3 NH

    bonds), but the answer would be the same regardless. You only need to account for bonds that

    participate in the reaction.

    9.

    Bond Energy per Bond (kJ per Bond)

    H-Cl 427

    S-Cl 271

    H-S 347

    Cl-Cl 243

    2 HCl + SCl2 H2S + 2 Cl2

    Reactants

    Bond Number of Bonds/Coefficient Bond Energy (each) Total Energy

    HCl 2 427 854

    SCl 2 271 542

    Total 1396

    Products

    Bond Number of Bonds/Coefficient Bond Energy (each) Total Energy

    HS 2 347 694

    Cl2 2 243 486

    Total 1180

    1,396 kJ – 1,180 kJ = + 216 kJ = Endothermic

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 12

    10.

    Bond Energy per Bond (kJ per mole)

    N-N 160

    H-H 432

    N-H 391

    N2 + 3 H2 2 NH3

    Reactants

    Bond Number of Bonds/Coefficient Bond Energy (each) Total Energy

    N2 1 160 160

    H2 3 432 1296

    Total 1456

    Products

    Bond Number of Bonds/Coefficient Bond Energy (each) Total Energy

    NH 6 391 2346

    Total 2346

    1456 kJ – 2346 kJ = -890 kJ = Exothermic

    11.

    Bond Energy per Bond (kJ per mole)

    C-Cl 339

    O-H 467

    H-Cl 427

    C-O 358

    CHCl3 + H2O HCl + CHCl2OH

    Reactants

    Bond Number of Bonds/Coefficient Bond Energy (each) Total Energy

    CCl 1 339 339

    OH 1 467 467

    Total 806

    Products

    Bond Number of Bonds/Coefficient Bond Energy (each) Total Energy

    HCl 1 427 427

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 13

    CO 1 358 358

    Total 785

    806 kJ – 785 kJ = + 21 kJ = Endothermic

    Use the Enthalpy of Formation Table on Page 2 and Hess’ Law to classify each of the reactions

    in 12-15 as Endothermic or Exothermic.

    12.

    Molecule Hformation (kJ)

    H2O -286

    CO -111

    H2 0

    CO2 -394

    H2O (l) + CO (g) H2 (g) + CO2 (g)

    Reactants Products

    Molecule Hformation Molecule Hformation

    H2O -286 H2 0

    CO -111 CO2 -394

    Total/Sum -397 Total/Sum -394

    ∆H = ∑ Hproducts – ∑ Hreactants

    = -394- (-397)

    = -394 + 397

    = +3 kJ = Endothermic

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 14

    13.

    Molecule Hformation (kJ)

    NH3 -368

    N2O4 27

    N2 0

    H2O -242

    8 NH3 (g) + 3 N2O4 (g) 7 N2 (g) + 12 H2O (g)

    Reactants Products

    Molecule Hformation Molecule Hformation

    NH3 -46 * 8 = -368 N2 0 * 7 = 0

    N2O4 +9 * 3 = 27 H2O -242 * 12 = -2,904

    Total/Sum -341 Total/Sum -2,904

    ∆H = ∑ Hproducts – ∑ Hreactants

    = -2,904 – (-341)

    = -2,904 + 341

    = -2,563 kJ = Exothermic

    For this question (in comparison to # 12), there are different values for H2O. Remember to make

    note of the phase of the molecule. The enthalpy of formation values are different because #12

    addresses water in liquid phase whereas #13 addresses water in gas phase.

    14.

    Molecule Hformation (kJ)

    Fe 0

    O2 0

    Fe2O3 -824

    4 Fe (s) + 3 O2 (g) 2 Fe2O3 (s)

    Reactants Products

    Molecule Hformation Molecule Hformation

    Fe 0 * 4 = 0 Fe2O3 2 * - 824 = -1,648

    O2 0 * 3 = 0

    Total/Sum 0 Total/Sum -1,648

  • Advanced Chemistry Thermochemistry

    © 2017 Supercharged Science www.ScienceLearningSpace.com 15

    ∆H = ∑ Hproducts – ∑ Hreactants

    = -1,648 – 0

    = -1,648 kJ = Exothermic

    15.

    Molecule Hformation (kJ)

    CaO -635

    CO2 -394

    CaCO3 -1,207

    CaO (s) + CO2 (g) CaCO3 (s)

    Reactants Products

    Molecule Hformation Molecule Hformation

    CaO -635 CaCO3 -1,207

    CO2 -394

    Total/Sum -1,029 Total/Sum -1,207

    ∆H = ∑ Hproducts – ∑ Hreactants

    = -1,207 – (-1,029)

    = -1,207 + 1,029

    = - 178 kJ = Exothermic