For further information please visit: www.macartney.com

SubConn®

03-2

014

IntroductionMacArtney and SubConn® have been working together since 1978 supplying underwater mateable and harsh environment connectors to customers worldwide. SubConn® connectors are widely regarded as dependable, rugged and cost effective. Easily recognisable by their red locking sleeves and with a track record of more than 35 years at the service of maritime equipment and system operators, SubConn® connectors are regarded as an industry standard connectivity solution within most marine markets and industries.

SubConn® circular seriesFirst introduced in 1978, the circular series forms the basis for the technology that characterises most SubConn® products available today. SubConn® circular connectors are available in various standard sizes and configurations with 2 to 25 contacts rated for 300 to 600 V at 5 to 10 A and offers the ability to combine signal and power within a single connector. SubConn® circular connectors are manufactured from high grade rubber with different types of body material and feature a high depth rating.

SubConn® low profile seriesThe SubConn® low profile series is designed for use with underwater systems and equipment requiring a more compact connector solution. The low profile layout enables users to assemble design optimised systems that produce less drag. SubConn® low profile connectors are manufactured from high grade rubber with different types of body material and feature a high depth rating. SubConn® low profile connectors feature the same contact sizes as the circular series and are available with 2 to 13 contacts rated for 300 to 600 V at 5 to 10 A.

SubConn® ethernet seriesFeaturing true ethernet type performance, the SubConn® ethernet series is developed to accommodate the demand for Gigabit data speed, signal and power for increasingly capable underwater systems. The series includes different types of ethernet and combined power and ethernet connector options all set to maximise data flow, while eliminating cross talk and noise. With contacts rated for 600 V at 4 A, SubConn® combined power and ethernet connectors allow signal and power supply to be unified in one high performance solution.

SubConn® coax seriesThe SubConn® coax series is used to provide High Definition (HD) video signal for underwater technology systems such as cameras and telemetry units. SubConn® coax connectors are available in 50 and 75 Ohm versions as coax-only and as a combined coax and electric connector versions with six pins for signal passage. The combined versions can be used to fully control and power equipment using a single connector. SubConn® coax connectors are designed to minimise signal attenuation caused by noise interference.

SubConn® specialsOver the years, a large number of ‘special’ connector solutions, utilising the proven SubConn® contact design, have been designed for specific applications. These connectors range from single contact units to advanced metal shell connectors for geophysical transition zone applications. To name just a few, the SubConn® specials includes SplitConn adapters, Reed switches, hermaphroditic connectors, mil spec connectors and unique products for direct circuit board mounting and mass produced underwater flash units.

SubConn® penetrator series The SubConn® penetrator series is developed as a fixed installation alternative to in-line and bulkhead connectors. SubConn® penetrators are primarily used for applications where direct signal and power feedthrough is emphasised above the flexibility provided by a mateable connector interface. SubConn® penetrators are manufactured from neoprene and based on industry standard flange and bulkhead mount metal bodies. The series comprises five shell sizes in straight or right angle configurations while custom solutions are available on demand.

SubConn® cables All standard SubConn® cables are of the flexible and water resistant polyurethane or neoprene rubber type. SubConn® cable configurations include single conductor, twisted pair, quad, coax, ethernet and numerous combined solutions for signal, data and power transfer. Supported by several worldwide locations, MacArtney provides advanced termination, moulding and cable assembly services for all SubConn® products.

SubConn® metal shell seriesThe SubConn® metal shell series represents an alternative to circular series connectors for applications requiring an even more rugged, resilient and protected connectivity solution. The connectors are manufactured from stainless steel and are available in three different shell sizes. Flange mountable and bulkhead connectors are available as standard and connector configuration ranges from 2 to 12 contacts rated for 300 to 600 V at 5 to 10 A. SubConn® metal shell connectors are designed to mate with compatible standard in-line connectors.

SubConn® power seriesThe SubConn® power series is designed to accommodate the ever growing power requirements of underwater systems. The SubConn® power series includes a single contact welding connector, three battery charging connectors (2, 3 and 4 contacts) and a 4 contact high power connector. The single contact welding connector can be operated at up to 3 kV at 250 A. The battery charging connectors are suitable for carrying up to 25 A per pin. The 4 contact high power connector is suitable for 600 V at 50 A per pin.