S.N DESCRIPITON OF WORKS UNIT NO.

1 GYPSUM BOARD FALSE CEILING :

entance Sft. 1.00reception area Sft. 1.00M.D cabin Sft. 1.00waiting lounge Sft. 1.00work station Sft. 1.00confrance room Sft. 1.00infront of toilet Sft. 1.00manager /pantry Sft. 1.00

2 FULL HIGH WOODEN/GLASS PARTITION

confrance Sft. 1.00M.D cabin Sft. 1.00server room Sft. 1.00

ESTIMATE FOR THE INTERIOR WORKS FOR THE PROPOSED OFFICE OF M/S. SUN IT SOLUTIONS,RAJAJINAGAR BANGALORE.

Providing and fabrication of Gypsum board false ceiling using G.I. Section like ceiling section of size 3"x1", intermidiate channels of size 1.75"x 0.5" , perimeter channels of size 1" x 1", soffit cleat, nuts, bolts, connecting clips, G.I. 'L' angle of size 0.75" x 0.75" will be used to hang the false ceiling from the existing R.C.C. roof. 12mm thick Gypsum boards will be fixed to the suspend GI grid work using drawl screws. Finally the joints between the boards will be filled with jointing compound and paper tape and neatly sanded and finished with one coat of top coat. The False ceiling will be finished with two coats of Emulsion painting with one coat of primer and a coat of full putty and one coat of touch-up putty.

Providing and fabrication of Wooden/full hight glass partition at , M.D.& confrance room , made out of Salwood sections of 1.75" x 1.75" (finished size) thick placed horizontally and vertically 2'0" c/c both ways or as required. The frame work covered with 8mm thick Industrial grade MDF and finished with 1mm thick laminate of approved colour and design. and paratation have requist size door with completed,.(if are using existing aluminium partation at confrance.server room, & pantry cost will reduce around 63114.00)

manager/pantry Sft. 1.00

3 HALF HIGH WOODEN PARTITION

work station Sft. 1.00manager/pantry Sft. 1.00

4 STOTAGE UNITS

M.D.& managers cabins Sft. 2.00server room Sft. 1.00

5 WORK STATION

work stations Sft. 2.00pantry Sft. 1.00

6 CONFRANCE TABLE

Providing and fabrication of Wooden partition at , confrance room & stock room, made out of Salwood sections of 1.75" x 1.75" (finished size) thick placed horizontally and vertically 2'0" c/c both ways or as required. The frame work covered with 8mm thick Industrial grade MDF and finished with 1mm thick laminate of approved colour and design. with completed,.

Providing and fabrication of low level hight storage unit at manager cabins & pantry an approved design made, using 19mm commrcil block board for virticals and horizentals and shutters. the rear side covered with 6mm plywood, the all visible surface will be an approved colour 1mm thick laminate and remainig surfaces will be finish with approved colour enamel painting with completed.

Providing and fabrication of work stations tables of an approved design made, using 19mm commercial block board virtical & table 12plywood & 6mm plywood using wherever necessary and the top , front , and only drawers front will be finished with an approved colour 1mmm thick lamibnate and the remaining surface will be finished with an approved colour of enamel painting /light house polishing.The table will be provided with three no of pedstals drawers with legrest, cpu stand with pvc block colour 21" keyboard tray and good qwality drawer channaels .locks fevicol etc ,.with completed.

Sft 1.00

7 M.D.TABLE

Sft 1.008 MANAGER TABLE

Sft 1.00

9 MAIN DOOR

Sft. 1.00

10 VIRTICAL BLINDS

Providing and fabrication of confrance room tables an approved design made, using 19mm commercial block board 12plywood & 6mm plywood using wherever necessary and the top , front , and only drawers front will be finished with an approved colour 1mmm thick lamibnate and the remaining surface will be finished with an approved colour of enamel painting /light house polishing. fevicol etc ,.with completed.

Providing and fabrication of M.D. room tables of an approved design made, using 19mm water proof block board 12plywood & 6mm plywood using wherever necessary and the top , front , and only drawers front will be finished with an approved colour 1mmm thick lamibnate and the remaining surface will be finished with an approved colour of enamel painting /light house polishing.The table will be provided with three no of pedstals drawers with legrest, cpu stand with pvc block colour 21" keyboard tray and good qwality drawer channaels .locks fevicol etc ,.with completed.

Providing and fabrication of manager table of size 5'0 x 2'6"x2'6"an approved design made, using 19mm commercial block board 12plywood & 6mm plywood using wherever necessary and the top , front , and only drawers front will be finished with an approved colour 1mmm thick lamibnate and the remaining surface will be finished with an approved colour of enamel painting /light house polishing.The table will be provided with three no of pedstals drawers with legrest, cpu stand with pvc block colour 21" keyboard tray and good qwality drawer channaels .locks fevicol etc ,.with completed.

Supply & making of main door using top & bottam section will be salwood wooden section & 12mm thick glass with company logo huching with required hardware of floor spring, handle ,lock etc with including of labour charges and completed.

front side Sft. 1.00 all windows Sft. 5.00

11 WALL & CEILLING PAINTING

Sft. 1.00

Grand total

3. BRANDS OF THE MATERIALS TO BE USED:

A. 19mm commercial block board

B. 12mm commercial ply: alpine

C. 6mm commercial ply: alpine

D. Laminates.: alpine

E) wire: vir/arched

F) switch and socket: anchor/finolex

G) D.B pols: anchor roma

H) painting: legrand

I) P.V.C. flooring

Providing and fixing of 100mm width Vertical blinds of approved colour and design.

Suppyling and Making of wall painting, using asian brand, with one coat of touch up putty, two coat of premium emulson selected colour painting with including of lobour and completed.

deduction of existing aluminium partation (we purchase of your present office aluminium partation)

: asianJ) aluminium section

: wonderK) virtical blinds

: jindal

Date: 08.09.2015. : vistaBangalore.

Note:

* Material which are laying in your site will be used according to the requirement & time constraints to be calculated.* Above stated areas will be tentative & exact areas can be calculated after completion of work.* All the responsibility will be taken from our side for successful completion of work.* 50 % of the amount at the time of approval & rest when the work progress.* Once the work starts, the work will be completed with in the given time w/o compromising in quality .* Grace period for this work will be 5 Days.* Any extra work will be charged extra as per market rates.* Taxes will be extra.

L H QTY RATE AMOUNT

21.50 2.00 43.0011.75 16.50 193.88

9.75 9.00 87.7511.00 9.00 99.0023.50 14.00 329.0011.00 11.00 121.00

4.50 4.50 20.2511.00 11.00 121.00

### 86.00 87279.25

14.00 8.50 119.0027.75 9.50 263.63

6.75 8.50 57.38

ESTIMATE FOR THE INTERIOR WORKS FOR THE PROPOSED OFFICE OF M/S. SUN IT SOLUTIONS,RAJAJINAGAR BANGALORE.

for glass

partision rate is 340

per SFT

4.00 8.50 34.00474.00 650.00 ###

23.00 4.00 92.0011.00 4.00 44.00

136.00 650.00 88400.00

3.00 2.50 15.003.50 5.00 17.50

32.50 850.00 27625.00

23.00 2.50 115.00 850.00 97750.0011.00 2.50 27.50 850.00 23375.00

1600.00 1600.00 measurement table top area

1250.00 1250.00

1.00 1250.00 1250.00

5.00 7.00 35.00 ### 16000.00

22.00 7.00 154.005.00 4.00 100.00

254.00 70.00 17780.00

### 22.00 48400.00

###

: vir/arched

: anchor/finolex

: anchor roma

Sl.no Description Qty.

1 Nos

25 775.00

2 Nos3 630.00

3

No 6 1900.00

4 LIGHTING & COMPUTER POINT WIRING

a 250 95.00

bNo. 30 592.00

cNos. 0 570.00

dNos. 0 600.00

ESTIMATE FOR THE ELECTRICAL WORKS FOR THE PROPOSED OFFICE OF M/S. SUN IT SOLUTATION, AT RAJAJINAGR, BANGALORE.

Unit

Rate in Rs

supply & fixing of led lights at enentrance.m.d cabin cinfrance.& other areas as per your requirement with including labour charges with completed

Supply and fixing of tublLights.as per your requirement with including materials and labour charges with completed.

supply & fixing of ceulling fans as per your requirement with required materials and including of fixing labour charges with completed.

Providing all materials, accessories and labour for wiring with PVC insulated stranded copper conductor wires of 1100V grade drawn through heavy gauge rigid PVC conduit of 2mm thickness using GI fishwire and necessary conduit accessories and etc,.

2 x 2.5sqmm + 1x1.0sqmm wires in 20mm dia PVC conduit.

Rmt.

Supply and installation of 5A, 5pin, modular type switched socket outlet with in pvc outlet box. For computer point

Supply and installation of 5A, 5pin, modular type switched socket outlet with in pvc outlet box. For light point

Supply and installation of 5A, modular type step type fan point outlet with in pvc outlet box.

5 A.C. POINTS

a 25 200.00

bNos. 2 600.00

6 DATA / NETWORKING

a 20mm casing pipe RM 0 25.00

b Nos. 0 450.00

c Nos. 0 250.00

4 RM 0 75.00

d RM 0 50.00

e Nos. 0 75.00

Providing all materials, accessories and labour for wiring with PVC insulated stranded copper conductor wires of 1100V grade drawn through heavy gauge rigid PVC conduit of 2mm thickness using GI fishwire and necessary conduit accessories and completed

4 x 2.0sqmm + 1x1.5sqmm wires in 32mm dia PVC conduit.

Rmt.

Supply and installation of 15A, 5pin, modular type switched socket outlet with in pvc outlet box. For a.c & fridge point

Providing all materials, accessories and labour for laying of heavy gauge rigid PVC casing with all conduit accessories, PVC junction/pull boxes, G.I fish wire, pvc modular box, fixing accessories etc,.

Supply and installation of RJ-45 outlet including the modular pvc box and its accessories.

Supply and installation of telephone point including the modular pvc box and its accessories.

Supply, installation, testing & commissioning of the Cat-5e Cable.Supply, installation, testing & commissioning of 3 pair telephone cable.

Labour charges for end termination & testomg of RJ-45 & Cat-5e and 3 pair Telephone cables.

4 . BRANDS OF THE MATERIALS TO BE USED:

a. wire : finolex/anchorb. switch & sicket : anchor romac. tublight : philips/havellsd. fan : cromton greavse.pipe conduct : modi

Date: 08.09.2015.Bangalore.

Note:

* Material which are laying in your site will be used according to the requirement & time constraints to be calculated.* Above stated areas will be tentative & exact areas can be calculated after completion of work.* All the responsibility will be taken from our side for successful completion of work.* 50 % of the amount at the time of approval & rest when the work progress.* Once the work starts, the work will be completed with in the given time w/o compromising in quality .* Grace period for this work will be 5 Days.* Any extra work will be charged extra as per market rates.* Taxes will be extra as applicable

Amount in Rs

Coated for panel Led of 12 vat's

ESTIMATE FOR THE ELECTRICAL WORKS FOR THE PROPOSED OFFICE OF M/S. SUN IT SOLUTATION, AT RAJAJINAGR, BANGALORE.

* Once the work starts, the work will be completed with in the given time w/o compromising in quality .