COMPONENT Campbell Scientific, Inc. | 815 W 1800 N | Logan, UT 84321-1784 | (435) 227-9120 | www.campbellsci.com USA | AUSTRALIA | BRAZIL | CANADA | CHINA | COSTA RICA | FRANCE | GERMANY | SE ASIA | SOUTH AFRICA | SPAIN | UK © 2014, 2017 Campbell Scientific, Inc. December 19, 2017 Sun Tracker Mounting Towers Part Numbers 31171, 31172, 31173, 31183 campbellsci.com/solar-energy More info: 435.227.9120 SOLYS 2 Sun Tracker with Shade-Ball Assembly on pn 31172 [190.5 cm (75 in)] tower *Allowable wind gust specification assumes the solar tracker is the only component mounted to the stand (no solar panels or enclosures), 5/8 inch J-bolts are used to secure the stand to the concrete base, which is attached to a concrete footing with a 91.4 cm (36 in) length, 91.4 cm (36 in) width, and 61 cm (24 in) depth. pn 31183 97.16 cm (38 in) tower pn 31173 143.5 cm (56 in) tower Overview Campbell Scientific offers three aluminum, corrosion-resistant sun tracker mounting towers for Kipp & Zonen Solys2, EKO STR-21G, and STR-22G solar trackers. Individual models differ in their length (see Specifications). Specifications Material: Hardened Aluminum Width on a side: 53 cm (21 in), center to center Required concrete pad dimensions: 91 L x 91 W x 122 D cm (36 x 36 x 48 in) Part Number Height Allowable Wind Gusts* 31171 236 cm (93 in) 100 mph 31172 190.5 cm (75 in) 115 mph 31173 143.5 cm (56 in) 129 mph 31183 97.16 cm (38 in) 148 mph Base Options Campbell Scientific offers these options for securing the towers to a concrete pad. B18 Mounting Base—hinged base makes sensors on the top of the tower easier to access after the tower has been installed. J-Bolt Mounting Kit (pn 29529)—brack- ets on each leg simplifies leveling and allow leveling adjustments after the concrete has set. The B18's stakes embed in a concrete pad.

Sun Tracker Mounting Towers - Campbell Sci · 31172 [190.5 cm (75 in)] tower *Allowable wind gust specification assumes the solar tracker is the only component mounted to the stand

Download PDF Report

Upload
others
View
2
Download
0

Embed Size (px)

Citation preview

Page 1: Sun Tracker Mounting Towers - Campbell Sci · 31172 [190.5 cm (75 in)] tower *Allowable wind gust specification assumes the solar tracker is the only component mounted to the stand

COMPONENT

December 19, 2017

Sun Tracker Mounting TowersPart Numbers 31171, 31172, 31173, 31183

campbellsci.com/solar-energy

More info: 435.227.9120

SOLYS 2 Sun Tracker with Shade-Ball Assembly on pn

31172 [190.5 cm (75 in)] tower

*Allowable wind gust specification assumes the solar tracker is the only component mounted to the stand (no solar panels or enclosures), 5/8 inch J-bolts are used to secure the stand to the concrete base, which is attached to a concrete footing with a 91.4 cm (36 in) length, 91.4 cm (36 in) width, and 61 cm (24 in) depth.

pn 31183 97.16 cm

(38 in) tower

pn 31173 143.5 cm

(56 in) tower

OverviewCampbell Scientific offers three aluminum, corrosion-resistant sun tracker mounting towers for Kipp & Zonen Solys2, EKO STR-21G, and STR-22G solar trackers. Individual models differ in their length (see Specifications).

SpecificationsMaterial: Hardened Aluminum

Width on a side: 53 cm (21 in), center to center

Required concrete pad dimensions: 91 L x 91 W x 122 D cm (36 x 36 x 48 in)

Part Number Height Allowable Wind Gusts*

31171 236 cm (93 in) 100 mph

31172 190.5 cm (75 in) 115 mph

31173 143.5 cm (56 in) 129 mph

31183 97.16 cm (38 in) 148 mph

Base OptionsCampbell Scientific offers these options for securing the towers to a concrete pad.

B18 Mounting Base—hinged base makes sensors on the top of the tower easier to access after the tower has been installed.

J-Bolt Mounting Kit (pn 29529)—brack-ets on each leg simplifies leveling and allow leveling adjustments after the concrete has set.

The B18's stakes em-bed in a concrete pad.