SUNFLO-PUMPS.pdf

8/17/2019 SUNFLO-PUMPS.pdf

1/8

SUNFLOHigh-Pressure Centrifugal Pumps


2/8

1

Sunflo Pump DesignHigh-Speed Design

Multi-stage performance with single-stage simplicity in a compact unit.

Impeller

The single open impellerconfiguration allows forgenerous 0.030 inchclearances and no

performance degradationwith use.

Inducers

Patented inducers incorporatean axial flow design that lowersNPSH requirements.

Small Shaft Overhang

Low L/D ratio minimizes shaftloading compared toconventional centrifugal

pumps, resulting in extendedseal and bearing life.

Pump Casing

The radially-split pump caseis available in a variety ofmaterials to meet all typesof process needs.

The case can be rotated toalternate discharge positionsfor installation needs.

P-1500 and P-2000 cases are available with either NPT or flanged connection. P-3000 is flanged only.

Gears

AGMA quality class 11 gears made of alloy steel, precision ground to guarantee a minimum G-10 life of 12 years andmaximum interchangeability. A variety of gear ratios ensures maximum flexibility in hydraulic performance.

Lubrication System

All gearboxes include an integral wet sump with either a splash or pressure lubrication system eliminating the need forauxiliary components.

A Heritage of Innovation

Leadership in Fluid Handling Technology and Experience

For more than thirty years, Sundyne Corporation has been a leading manufacturer of engineered pumps and

compressors. The Sunflo pump product line represents the culmination of this experience. Building on our aerospacetechnology origins, today our products are found in a wide range of industrial applications throughout the process

industry.


3/8

2

Sunflo P-2000 on a felt cleaning paper

machine application.

Sunflo P-2000 high-pressure cleaning.

Sunflo P-3000 on reverse osmosis

application.

Sunflo P-3000 installed in combustion

turbine water injection application.

Applications

• Pollution Control Reverse osmosis, NOx suppression, spraying, descaling, wet scrubbing, and ultrafiltration

• Chemical & Petroleum Caustic service, reactor feed, seal flushing, sampling, process injection, high flowmetering, descaling, spraying, transfer, waste disposal, and drum knockout

• Power Systems Combustion turbine water injection and inlet fogging, fuel feed, boiler feed,desuperheating, condensate return, deaerating, and seal flush

• General Industrial Continuous wire vulcanization, boiler systems, vehicle washing, fuel atomization, andtanning paste board cleaning

• Pulp and Paper Felt shower, screen shower, trim squirt, boiler feed, washdown, reverse osmosis,desuperheater, seal flushing, pigment metering and spent sulfide liquor

• Vehicle Manufacturing Gun drilling coolant feed, painting and lead finish booth cleaning, spraying, continuouswire vulcanization, deburring plastics, and refrigerant fill

•Mining Dust suppression, seal flushing, low flow dewatering, and hydraulic mining

• Food & Beverage Central cleaning, beverage container washing, boiler feed, and high flow metering

• Oil Production Saltwater disposal, saltwater transfer, pipeline distillate injection, water flood, well kill,reverse osmosis, and steam generation


4/8

Typical Sectional View

Frame Mounted PumpThe frame mounted configuration offers a greaterdegree of performance diversity and added driver

flexibility such as the use of standard electric motors,steam turbines, and internal combustion.

Close-Coupled PumpThe close-coupled design incorporates the proven Sunflo

design in an integral pump and motor package. Thisconfiguration provides a compact lightweight unit thatdoes not utilize bedplates, couplings or belts. Installationis simplified and alignment of the pump and motor is not

necessary. Close-coupled pumps are ideal for OEMpackages and other industrial applications where a frame

unit is not desired.

P-3000 Ball Bearing Version

Pinion Gear

Oil Fill PlugFlush Port

Seal Housing

Pump Case

FlowStraightener

Drain

GearboxHousing

Ball Bearing

Bull Gear

Shroud

J ournal Bearing forHigh PressureAlso Available

3


5/8


6/8

Aftermarket Support

• Genuine Service and Parts Program

• Factory authorized overhaul and repair centersworldwide

• Off-the-shelf repair kits and parts• 24 hour customer service phone line

• Complete in-field serviceability

Shaft Assembly Exchange Program

Easy MaintenanceSunflo pumps incorporate a modular high-speed shaft assembly containing all of the pump rotating parts, seals and

bearings. This assembly is easily removed from the gearbox by removing the pump casing bolts. Since no alignment,measurement, or adjustment of the shaft and seals is necessary, reassembly is quick and error free. With replacement

in less than an hour, downtime is kept to a minimum.

1.Remove hex headcapscrews

3.High Speed Shaft assemblyis easily removed

2.Remove pump casing

5

Sunflo offers a factory exchange program for its high-speed shaft assembly replacements. This convenientprogram allows you to send in your old shaft assembly and receive a return credit, providing significant cost

savings. Best of all, rebuilt units have the same quality construction, testing and factory warranty as new shaftassemblies.


7/8

Other Products

6

Sealless

VIP-801

API 610/685

Canned Motor Pump

HMD/Kontro

Metallic Magnet

Drive

ANSIMAG

Non-MetallicMagnet Drive

Compressors

Sanitary-Duty

The world’s most comprehensive sealless pump range

The low flow centrifugal compressor

An innovative line of sanitary positive displacement pumps

Sundyne

CannedMotor Pump

(SCMP)

T o t a l H e a d - F e e t

T o t a l H e a d - M e t e r s

1750 rpm

VIP Pump Coverage

SundyneCompressors

MASO/Sine Pump

Meters Feet

Sealless Pump Coverage

LMV-322

LMV-311

LMV-313LMV-801

LMV-802

LMV-806

BMP-338

High Head Low Flow API

Sundyne API Pump CoverageMeters Feet

Sundyne Pumps for heavy-duty services

Based on

specific gravityof 0.5

Visit our website

www.sundyne.com


8/8

01.10.01E, 10/2003 © Sundyne Corporation 2002 All Rights Reserved

• ANSIMAG • ANYSPEED • CASTER • HMD/KONTRO • MASO/SINE • SCMP • COMPRESSORS • SUNDYNE • SUNFLO •

Sundyne Corporation • Arvada, CO 80007 USA • +1-303-425-0800 • FAX: +1-303-425-0896 • www.sundyne.com

www.sundyne.com Visit our website for a complete list of

manufacturers representatives,

service centers, and direct offices

located throughout the world.

Documents

SUNFLO-PUMPS.pdf