Upload
lamthu
View
254
Download
7
Embed Size (px)
Citation preview
Super-precision bearings interchange
Contents
Use of the equivalent data manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Super-precision angular contact ball bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Super-precision cylindrical roller bearings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Super-precision double direction angular contact thrust ball bearings . . . . . . . . 15
Super-precision angular contact thrust ball bearings for screw drives . . . . . . . . 20
2
Use of the equivalents data manual
SKF offers a wide range of super-precision bearings. They are designed for machine tool spindles and other applications that require a high level of running accuracy at high to extremely high speeds.
This interchange guide to SKF super-preci-sion bearings provides fast and easy conver-sions of manufacturer's designations to the SKF equivalent designations . However, it will not result in an identical bearing, since com-petitors’ designs may vary from SKF designs, and you can have differences in shoulder diameter, number of balls, cage location, etc .
The interchange information was com-piled using data available at the time of pub-lication; however, SKF makes no claims about performance equivalence and as-sumes no responsibility or liability for use of this interchange information .
This interchange is to be used as a guide-line only, as manufacturers’ designations may change without notice .
Interchanges to SKF super-precision bearings are made in the following bearing types:
• super-precision angular contact ball bearings
• super-precision cylindrical roller bearings • super-precision double direction angular
contact thrust ball bearings• super-precision angular contact thrust
ball bearings for screw drives
Work flow to crossover super-precision bearing designations 1 Determine the manufacturer and desig-
nation of the bearing . This is normally found on the side face of the bearing .
2 Use the tables to identify the characteristics and features of the bearing by identifying theprefixorsuffix(symbol•means“ information not available”; symbol ◼ means “not included in the range”) .
3 Use the SKF designation system tables to construct the complete SKF designation of the bearing .
If the bearing designation is not recogniz-able or incomplete, please contact the SKF application engineering service or your local SKF company with as much information as possible regarding external dimensions, bearing type, cage, ball and ring material, number of rolling elements, bearing set ar-rangement and preload, and manufacturer of the bearing and the machine .
Detailed information on the individual SKF super-precision bearing types, includ-ing their characteristics and the available designs, is provided in the SKF catalogue Super-precision bearings († Publ. 13383) or at skf .com .
3
4
Super-precision angular contact ball bearings
Designation examples SKF S7016 ACE/HCP4ADGA SKF 7010 CD/P4ADGBManu-facturer Designation Designation
SKF S 70 16 AC E HC P4A DG A 70 10 C D P4A DG B
NSK 80 B ER 10 H T V1V DU EL P4Y 70 10 C TR DU L P4FAG HC RS 70 16 D 2RSD T P4S DU L B 70 10 C T DU L P4NTN 5S HSE 0 16 LLB T1 AD GD2 GL P42 70 10 U C GD2 GL P4GMN HY SM 60 16 2RZ E TA P4 DU L S 60 10 C TAM 7 DU LRHP T 70 16 S C T RR DU L P3 B 70 10 X2 TA DU L EP7BARDEN C 1 16 J RR DU L 1 10 H C DU LIBC CB H 70 16 E T 2RSZ P4A DU X 70 10 C – T P4 DU LFAFNIR 3 MMV C 91 16 HX VV DU X 2 MM 91 10 WI CR DU LKOYO 3NC HAR 00 0 16 CA GLx2 S P4 70 10 C PA DG L P4SNR ML E CH 70 16 H V DU J7 4S 70 10 C V DU J 8 4ZYS V7 0 16 AC – HQ1 2RZ P4A DG A 7 0 10 C - P4 DG BSNFA VE X 80 S NS 7/9 CE 3 DU L E X 50 7 CE 1 DU M
Colour codes
nn Sealingnn Contact anglenn Accuracynn Bearing seriesnn Bearing sizenn Internal designnn Cagenn Bearing set arrangementnn Preloadnn Ball materialnn Special ring materialnn Lubrication features
SKF super-precision angular contact ball bearings high-capacity D design (1), high-speed E design (2), high-speed B design (3).
1 2 3
5
nnSealing
Manu- facturer
Designation
SKF S
NSK V1VFAG 2RSD1)
HSS, HCS, XCS2)
NTN LLBGMN 2RZRHP RRBARDEN RRIBC 2RSZFAFNIR VVKOYO 00SNR EZYS 2RZSNFA S
1) for B design2) for other types
nnContact angle
Manu-facturer
15° 18° 20° 25° 30°
SKF C F ◼ AC ◼
NSK C BNR2) • A5 BER2)
A
FAG C • D E •NTN C • – 1) AD – 1)
GMN C 18 • E •RHP X2 • • X3 •BARDEN C • • E •IBC C • • E AFAFNIR 2 • • 3 •KOYO C • CA • ASNR C • • H •ZYS C • • AC •SNFA 1 2 • 3 •
1) – no designation suffix2) bearing type and contact angle in the ROBUST series
nnAccuracy
Manu-facturer
Designation
SKF P4 P4A PA9A VQ126
NSK P4 P3 P2 P4YFAG P4 P4S • P4S-K52)
NTN P4 P42 P2 •GMN A7 P4 P2/A9 •RHP EP7 EP7/9 EP9 •BARDEN – 1) • • CIBC P4A P2H P2A X1 to X9FAFNIR MM MMV MMX •KOYO P2 P4 • •SNR 4 4S 2 RZYS P4 P4A P2 •SNFA 7 7/9 9 SQ
1) – no designation suffix2) Reduced bore and outer diameter tolerance as per VQ253
nnBearing series
Manu-facturer
Designation
SKF 718 719 70 72
NSK • 9 0 2• 19 10 20
FAG 718 719 70 72NTN 78 79 70 72GMN 618 619 60 62RHP • 9 0 2BARDEN • 19 1 2IBC 718 719 70 72FAFNIR • 93 91 2KOYO • 9 0 2SNR • 719 70 72ZYS 18 19 0 2SNFA A B X 2
nnBearing size
Manu facturer Designation (bore code) 10 mm1) 12 mm 15 mm 17 mm 20 mm
SKF 00 01 02 03 042)
NSK3) 00 01 02 03 042)
FAG 00 01 02 03 042)
NTN 00 01 02 03 042)
GMN 00 01 02 03 042)
IBC 00 01 02 03 042)
RHP 00 01 02 03 042)
BARDEN 00 01 02 03 042)
FAFNIR 00 01 02 03 042)
KOYO 00 01 02 03 042)
SNR 00 01 02 03 042)
ZYS 00 01 02 03 042)
SNFA 10 12 15 17 20
1) less than 10 mm, bearing size = mm bore diameter2) from 04 and up multiply by 5 (for example 05 = 25 mm bore diameter)3) for BER and BNR code = mm bore diameter
nnCage
Manufacturer Outer ring centred Ball centred Phenolic Brass PEEK Polyamide Phenolic PEEK Polyamide
SKF – 1) MA TNHA ◼ T TNH TN9
NSK TR • • • • • TYNFAG T • • • • • •NTN T1 L1 • T2 • • •GMN TA, TAM2) • TXM2) TA • • •RHP T (design E)
TA (design D)MA • • • • •
BARDEN – 1), H • • • • • •IBC T M K PX • • •FAFNIR CR • • PRB, PRC • • •KOYO PA . . FT PA . . FY • PA . . FG –5 . . FT • –5 . . FGSNR V (70-719)
G1 (72)• • • • • •
ZYS – 1) • • TN1 • • •SNFA CE LE KE PE C K •1) – no designation suffix2) ball retaining
6
nnBearing set arrangement
Manufacturer Designation
SKF DB DF DT DG TBT TFT TT TG QBC QFC QBT QFT QT QG
NSK DB DF DT DU DBD DFD DTD DUD DBB DFF DBT DFT DTT QUFAG DB DF DT DU TBT TFT TT TU QBC QFC QBT QFT QT QUNTN DB DF DT GD2 DBT • • GD3 DTBT • • • • GD4GMN DB DF DT DU TBT TFT TT TU QB QF QBT QFT QT QURHP DB DF DT DU 2TB 2FT 3T 3U 2TB2T 2T2FT 3TB 3TF 4T 4UBARDEN DB DF DT DU • • • • • • • • • •IBC DB DF DT DU TBT TFT TT TU QBC QFC QBT QFT QT QUFAFNIR DB DF DT DU • • • TU • • • • • QUKOYO DB DF DT GLx2 DBD DFD DTD GLx3 DBB DFF DBT DFT • GLx4SNR DB DF DT DU Q16 • • TU Q21 • Q18 • • QUZYS DB DF DT DG TBT TFT TT TG QBC QFC QBT QFT QT QGSNFA DD FF T DU TD TF TT TU TDT TFT 3TD 3TF 4T 4U
nnBall material
Manu- facturer
DesignationSteel balls Ceramic balls
SKF – 1) HC
NSK2) – 1) SN24FAG – 1) HCNTN – 1) 5SGMN – 1) HYRHP – 1) SNBARDEN – 1) CIBC – 1) CBFAFNIR – 1) CKOYO – 1) 3NCSNR – 1) CHZYS – 1) HQ1SNFA – 1) NS
1) – no designation suffix2) for BRN, BER and BGR series:
S = steel balls H = ceramic balls
nnSpecial ring material
Manu- facturer
Designation
SKF V
NSK XFAG XCNTN 2LAGMN NRHP •BARDEN XCIBC XFAFNIR •KOYO •SNR NZYS •SNFA XN
nnLubrication features1)
Manu- facturer
Designation
SKF L H
NSK E33 •FAG DLR •NTN • •GMN +L +LBRHP • •BARDEN • •IBC S •FAFNIR • •KOYO HAF •SNR L2 L1ZYS • •SNFA GH H
1) For other lubrication features refer to the manufacturers’ publications
nnPreload
Manufacturer Designation
SKF A B C D G . . . K . . .
NSK EL L M H CP CAFAG L M H • • •NTN • GL GN GM G CSGMN • L M S V •RHP • L M H • •BARDEN • L M H • •IBC X L M H U AFAFNIR X L M H • •KOYO S L M H CY CSSNR 7 8 9 • X •ZYS A B C • G •SNFA L M F • . . .daN . . .μm
nnInternal design
Manu- facturer
High capacity
High speed
High speed (small balls)
SKF D E B
NSK 7 BNC BNRBGR BER
FAG B RS HSNTN D HSE
HSBHSF
GMN S SM KHRHP B T X or SBARDEN H J •IBC • • HFAFNIR WI HX WNKOYO 7 HAR •SNR – 1) ML •ZYS 7 V7 •SNFA E/SE VE H
1) – no designation suffix
7
SKF super-precision angular contact ball bearings designation system
Prefix
– Open bearing (no designation prefix)S Sealed bearingV Bearing with NitroMax steel rings and bearing grade silicon nitride Si3N4
balls (hybrid bearing)
Bearing series
718 Angular contact ball bearing in accordance with ISO dimension series 18719 Angular contact ball bearing in accordance with ISO dimension series 1970 Angular contact ball bearing in accordance with ISO dimension series 1072 Angular contact ball bearing in accordance with ISO dimension series 02
Bearing size
6 6 mm bore diameter7 7 mm bore diameter8 8 mm bore diameter9 9 mm bore diameter00 10 mm bore diameter01 12 mm bore diameter02 15 mm bore diameter03 17 mm bore diameter04 (x5) 20 mm bore diameterto72 (x5) 360 mm bore diameter
Internal design
CD 15° contact angle, high-capacity designACD 25° contact angle, high-capacity designCE 15° contact angle, high-speed E designFE 18° contact angle, high-speed E designACE 25° contact angle, high-speed E designCB 15° contact angle, high-speed B designFB 18° contact angle, high-speed B designACB 25° contact angle, high-speed B design
Single bearing – execution and preload
– Single standalone bearing (no designation suffix) (718 . . D, 719 . . D, 70 . . D, 72 . . D, 719 . . E, 70 . . E, 719 . . B and 70 . . B series)
GA Single, universally matchable, extra light preload (719 . . D, 70 . . D and 72 . . D series)GA Single, universally matchable, light preload (718 . . D, 719 . . E, 70 . . E, 719 . . B and 70 . . B series)GB Single, universally matchable, light preload (719 . . D, 70 . . D and 72 . . D series)GB Single, universally matchable, moderate preload (718 . . D, 719 . . E, 70 . . E, 719 . . B and 70 . . B series)GC Single, universally matchable, moderate preload (719 . . D, 70 . . D and 72 . . D series)GC Single, universally matchable, heavy preload (718 . . D, 719 . . E, 70 . . E, 719 . . B and 70 . . B series)GD Single, universally matchable, heavy preload (719 . . D, 70 . . D and 72 . . D series)
Cage
– Cotton fabric reinforced phenolic resin or carbon fibre reinforced PEEK, outer ring centred (no designation suffix)
MA Machined brass, outer ring centredTNHA Glass fibre reinforced PEEK, outer ring centred
Examples: Single bearing – 71922 CDGBTNHA/PA9AL 719 22 CD GB TNHA / PA9A L
Matched bearing set – S7010 ACD/HCP4AQBCC S 70 10 ACD / HC P4A QBC C
8
Bearing set – preload
A Extra light preload (719 . . D, 70 . . D and 72 . . D series)A Light preload (718 . . D, 719 . . E, 70 . . E, 719 . . B and 70 . . B series)L Light preload – only for matched bearings sets in TBT, TFT, QBT and QFT
arrangements (718 . . D, 719 . . E and 70 . . E series)B Light preload (719 . . D, 70 . . D and 72 . . D series)B Moderate preload (718 . . D, 719 . . E, 70 . . E, 719 . . B and 70 . . B series)M Moderate preload – only for matched bearings sets in TBT, TFT, QBT and QFT
arrangements (718 . . D, 719 . . E and 70 . . E series)C Moderate preload (719 . . D, 70 . . D and 72 . . D series)C Heavy preload (718 . . D, 719 . . E, 70 . . E, 719 . . B and 70 . . B series)F Heavy preload – only for matched bearings sets in TBT, TFT, QBT and QFT
arrangements (718 . . D, 719 . . E and 70 . . E series)D Heavy preload (719 . . D, 70 . . D and 72 . . D series)G… Special preload, expressed in daN e .g . G240 (718 . . D, 719 . . D, 70 . . D, 72 . . D,
719 . . E, 70 . . E, 719 . .B and 70 . . B series)
Bearing set arrangement
DB Set of two bearings arranged back-to-back <>DF Set of two bearings arranged face-to-face ><DT Set of two bearings arranged in tandem <<DG Set of two bearings for universal matchingTBT Set of three bearings arranged back-to-back and tandem <>>TFT Set of three bearings arranged face-to-face and tandem ><<TT Set of three bearings arranged in tandem <<<TG Set of three bearings for universal matchingQBC Set of four bearings arranged tandem back-to-back <<>>QFC Set of four bearings arranged tandem face-to-face >><<QBT Set of four bearings arranged back-to-back and tandem <>>>QFT Set of four bearings arranged face-to-face and tandem ><<<QT Set of four bearings arranged in tandem <<<<QG Set of four bearings for universal matchingPBC Set of five bearings arranged tandem back-to-back <<>>>PFC Set of five bearings arranged tandem face-to-face >><<<PBT Set of five bearings arranged back-to-back and tandem <>>>>PFT Set of five bearings arranged face-to-face and tandem ><<<<PT Set of five bearings arranged in tandem <<<<<PG Set of five bearings for universal matching
Lubrication features
H Two lubrication holes on the non-thrust side of the outer ringH1 Two lubrication holes on the thrust side of the outer ringL Annular groove with two lubrication holes on the non-thrust side of the outer
ring and two annular grooves fitted with O-rings in the outer ringL1 Annular groove with two lubrication holes on the thrust side of the outer ring
and two annular grooves fitted with O-rings in the outer ring
Accuracy
P4 Dimensional and running accuracy in accordance with ISO tolerance class 4P4A Dimensional accuracy in accordance with ISO tolerance class 4, running
accuracy better than ISO tolerance class 4P2 Dimensional and running accuracy in accordance with ISO tolerance class 2PA9A Dimensional and running accuracy in accordance with ISO tolerance class 2
Ball material
– Carbon chromium steel (no designation suffix)HC Balls made of bearing grade silicon nitride Si3N4 (hybrid bearing)
Examples: Single bearing – 71922 CDGBTNHA/PA9AL 719 22 CD GB TNHA / PA9A L
Matched bearing set – S7010 ACD/HCP4AQBCC S 70 10 ACD / HC P4A QBC C
9
10
Super-precision cylindrical roller bearings
Colour codes
nn Bearing designnn Dimension seriesnn Bearing sizenn Internal design and bore shapenn Cagenn Roller materialnn Internal clearancenn Tolerance classnn Lubrication features
Designation examples
SKF N 1016 KPHA/HC5SP
Manufacturer Designation
SKF N 10 16 K PHA HC5 SP
NTN 5S N 10 16 HS1) T6 K NA P4FAG HC N 10 16 K PVPA1 SPKOYO 3NC N 10 16 K C1NA FG P4NSK N 10 16 RXH2) TP KR CCO P4
SKF NN 3020 KTN9/SPW33
Manufacturer Designation
SKF NN 30 20 K TN9 SP W33
NTN NN 30 20 HS1) T6 K NA P4FAG NN 30 20 AS K M SPKOYO NN 30 20 K W C1NA FG P4NSK NN 30 20 TB3) KR E44 CC0 P4
SKF NNU 4924 BK/SPW33
Manufacturer Designation
SKF NNU 49 24 BK SP W33
NTN NNU 49 24 K P4FAG NNU 49 24 S K M SPNSK NNU 49 24 MB KR E44 P4
1) HS = high speed design2) RXH identifies heat resistant steel SHX in inner and outer rings, ceramic rollers, outer ring guided PEEK cage3) cage material PPS (220°)
SKF super-precision cylindrical roller bearings single row (N design) basic design (1), high-speed design (2), double row (NN design) (3), double row (NNU design) (4).
NN 30 NNU 49
1 2
3 4
nnLubrication features
Manu- facturer
Designation
SKF W33
NTN •FAG AS1), S2)
KOYO WNSK E44
nnTolerance class
Manu -facturer
Designation
SKF SP UP
NTN P4 UPFAG SP UPKOYO P4 •NSK P4 •
1) NN series 2) NNU series
11
nnBearing design
Manu-facturer
Designation
SKF NNU NN N
NTN NNU NN NFAG NNU NN NKOYO • NN NNSK NNU NN N
nnDimension series
Manu-facturer
Designation
SKF 49 10 30
NTN 49 10 30FAG 49 10 30KOYO • 10 30NSK 49 10 30
nnBearing size
Manu-facturer
Designation Bore diameter [mm]
SKF 1) 1)
NTN 1) 1)
FAG 1) 1)
KOYO 1) 1)
NSK 1) 1)
1) bearing size from 05 and up x5 (for example 05 = 25 mm bore diameter)
nnInternal design and bore shape
Manu- facturer
Tapered bore
Cylindrical bore
SKF K – 1)
NTN K – 1)
FAG K – 1)
KOYO K – 1)
NSK KR – 1)
nnCage (Single row cylindrical roller bearing N design)
Manu-facturer
Brass roller centred
Polyamide PA66 roller centred
Glass fibre reinforced PA66 roller centred
Carbon fibre reinforced PEEK outer ring centred
Glass fibre reinforced PA66 outer ring centred
SKF ◼ TN TN9 PHA TNHA
NTN – 1) • • • T6FAG M1 • • • PVPA1KOYO FY2) • FG • •NSK MR • • • •
nnCage (Double row cylindrical roller bearing NN)
Manu-facturer
Brass roller centred
Polyamide PA66 roller centred
Glass fibre reinforced PA66 roller centred
Carbon fibre reinforced PEEK outer ring landed
Glass fibre reinforced PEEK outer ring landed
SKF – 1) TN TN9 ◼ ◼
NTN – 1) • • • T6FAG M • • • •KOYO FW3) • FG • •NSK MB • • TB •
1) – no designation suffix2) FY: integrated machined cage made of copper alloy3) FW: separable machined cage made of copper alloy
nnRoller material
Manu -facturer
Steel rollers
Ceramic rollers
SKF – 1) HC5
NTN – 1) CSFAG – 1) HCKOYO – 1) 3NCNSK – 1) RXH
1) – no designation suffix
nnInternal clearance
Manu -facturer
Standard clearance
Special reduced clearance
Special increased clearance
SKF – 1) VS019 SPC2
NTN C1NA C9NA C2NAFAG – 1) • C2KOYO C1NA C9NA C2NANSK CC1 CC9 CC2
1) – no designation suffix
SKF super-precision bearing double row cylindrical roller bearings in the NNU series are available only with machined brass cage, roller centred (no designation suffix) .
1) – no designation suffix
12
SKF super-precision cylindrical roller bearings designation system
Bearing design
N Single row cylindrical roller bearingNN Double row cylindrical roller bearingNNU Double row cylindrical roller bearing
Dimension series
10 In accordance with ISO dimension series 1030 In accordance with ISO dimension series 3049 In accordance with ISO dimension series 49
Bearing size
05 (x5) 25 mm bore diameterto92 (x5) 460 mm bore diameterfrom/500 Bore diameter uncoded [mm]
Internal design and bore shape
– Cylindrical bore (no designation suffix)B Modified internal designK Tapered bore, taper 1:12
Cage
– Machined brass cage, roller centred (no designation suffix)PHA Carbon fibre reinforced PEEK cage, outer ring centredTN PA66 cage, roller centredTN9 Glass fibre reinforced PA66 cage, roller centredTNHA Glass fibre reinforced PEEK cage, outer ring centred
Roller material
– Carbon chromium steel (no designation suffix)HC5 Rollers made of bearing grade silicon nitride Si3N4 (hybrid bearing)
Tolerance class and internal clearance
SP Dimensional accuracy in accordance with ISO tolerance class 5, running accuracy in accordance with ISO tolerance class 4
UP Dimensional accuracy in accordance with ISO tolerance class 4, running accuracy better than ISO tolerance class 4
– Standard radial internal clearance C1 (no designation suffix)C2 Radial internal clearance greater than C1CN Normal radial internal clearanceC3 Radial internal clearance greater than Normal
Other variants
VR521 Bearing supplied with measuring report (standard for NN 30 series bearings with d > 130 mm)VU001 Inner ring raceway with finish-grinding allowanceW33 Annular groove and three lubrication holes in the outer ringW33X Annular groove and six lubrication holes in the outer ring
Examples: N 1016 KPHA/HC5SP N 10 16 K PHA / HC5 SP
NN 3020 KTN9/SPVR521 NN 30 20 K TN9 / SP VR521
NNU 49/500 B/SPC3W33X NNU 49 /500 B / SPC3 W33X
13
14
Super-precision double direction angular contact thrust ball bearings
Colour codes
nn Accuracynn Bearing seriesnn Bearing sizenn Internal designnn Cagenn Preloadnn Ball materialnn Arrangementnn Lubrication features
Designation examples
SKF BTW 70 CTN9/SPW33
Manufacturer Designation
SKF BTW 70 C TN9 SP W33
NTN 562 0 14 GN P4FAG 2344 14 M SPKOYO 2344 14 B FY P4NSK 70 TAC 20D PN7 C7
SKF BTM 150 AM/P4CDBA
Manufacturer Designation
SKF BTM 150 A M P4C DB A
NTN HTA 0 30 U A L1 DB GL P4LKOYO ACT 0 30 A DB L FY P4NSK 150 BAR 10 S DB L P4AFAG BAX 150 F T P4S DB
SKF super-precision double direction angular contact thrust ball bearings basic design (BTW series) (1), high-speed design (BTM series) (2).
BTW
BTM
1
2
15
nnBearing series – contact angle 60° BTW series1)
Manu facturer Designation
SKF BTW . . C
NTN 5620FAG 2344KOYO 2347 . . BNSK TAC20D
nnBearing series BTM series
Manu facturer Designation
SKF BTM
NTN HTA 0 UFAG BAXKOYO ACT 0NSK 10
nnBearing size BTW series
Manu facturer Designation Bore diameter [mm]
SKF 70 70
NTN 14 (¥5) 70 mm boreFAG 14 (¥5) 70 mm boreKOYO 14 (¥5) 70 mm boreNSK 70 70
nnBearing size BTM series
Manu facturer Designation Bore diameter [mm]
SKF 150 150
NTN 30 (¥5) 150 mm boreFAG 150 150KOYO 30 (¥5) 150 mm boreNSK 150 150
nnInternal design BTW series
Manu - facturer
small bore diameter type
large bore diameter type
SKF – 1) A
NTN – 1) MFAG 4 7KOYO 4 7NSK • •
1) – no designation suffix
nnInternal design – Contact angle BTM series
Manu - facturer
30° 40°
SKF A B
NTN A – 1)
FAG F HKOYO – 1) BNSK BAR BTR
1) – no designation suffix
nnCage BTW series
Manu - facturer
Brass ball centred
glass fibre reinforced PA66 ball centred
SKF M TN9
NTN – 1) •FAG M •KOYO FY •NSK – 1) •
1) – no designation suffix
nnCage BTM series
Manu - facturer
Brass ball centred
glass fibre reinforced PA66 ball centred
SKF M TN9
NTN L1 T2FAG2) • •KOYO FY FGNSK – 1) TYN
1) – no designation suffix2) laminated fabric, outer ring centered cage, designation suffix T
nnBalls material BTW and BTM series
Manu - facturer
Steel ball
Ceramic ball
SKF – 1) HC5
NTN – 1) 5SFAG – 1) •KOYO – 1) •NSK S H
1) – no designation suffix
1) Bearings in the BTW series are dimensionally interchange-able with bearings in the former 2344(00) and 2347(00) series .
16
nnAccuracy BTW series
Manu facturer Designation
SKF SP
NTN P4FAG SPKOYO P4NSK PN7
nnAccuracy BTM series
Manu facturer Designation
SKF P4C
NTN P4LFAG P4SKOYO P4NSK P4A
nnLubrication features BTW series
Manu facturer Designation
SKF W33
NTN •FAG •KOYO •NSK •
nnArrangement BTM series
Manu facturer Designation
SKF DB
NTN DBFAG DBKOYO DBNSK DB
nnPreload BTW series
Manu facturer Designation
SKF –1)
NTN GNFAG –1)
KOYO –1)
NSK C7
1) – no designation suffix
nnPreload BTM series
Manu facturer Light preload Heavy preload Special preload
SKF A B G…
NTN GL GM •FAG L MKOYO L M •NSK L • CP . . .
17
SKF super-precision double direction angular contact thrust ball bearings designation system
Bearing series
BTW Basic design double direction angular contact thrust ball bearingBTM High-speed design double direction angular contact thrust ball bearing
Bearing size
35 Bore diameter [mm]to200
Internal design
A 30° contact angleB 40° contact angleC 60° contact angleA As a second letter after the contact angle information (for BTW series only):
Bearing with a larger bore to to be mounted on the large diameter side of a cylindrical roller bearing with a tapered bore .
Cage
M Two machined brass cages, snap-type (for BTW series), window-type (for BTM series), ball centred
TN9 Two glass fibre reinforced PA66 cages, snap-type (for BTW series), window-type (for BTM series), ball centred
Ball material
– Carbon chromium steel (no designation suffix)HC Balls made of bearing grade silicon nitride Si3N4 (hybrid bearing)
Accuracy
P4C Dimensional accuracy approximately to ISO tolerance class 4 and running accuracy better than ISO tolerance class 4 for radial bearings (for BTM series bearings only) .
SP Dimensional accuracy approximately to ISO tolerance class 5 and running accuracy better than ISO tolerance class 4 for thrust bearings (for BTW series bearings only) .
UP Dimensional accuracy approximately to ISO tolerance class 4 and running accuracy better than ISO tolerance class 4 for thrust bearings (for BTW series bearings only) .
Lubrication feature (for BTW series bearings only)
W33 Annular groove and three lubrication holes in the housing washer
Arrangement (for BTM series bearings only)
DB Two bearings arranged back-to-back
Preload (for BTM series bearings only)
A Light preloadB Heavy preloadG… Special preload, expressed in daN e .g . G240
Examples: BTW 70 CTN9/SPW33 BTW 70 C TN9 / SP W33
BTM 150 AM/HCP4CDBA BTM 150 A M / HC P4C DB A
18
19
Super-precision angular contact thrust ball bearings for screw drives
Colour codes
nn Bearing seriesnn Bearing sizenn Design featuresnn Execution – Preloadnn Sealing solutionsnn Bearing set arrangementnn Tolerance class
Designation examples
SKF BSD 3062 CGA-2RZ
Manufacturer Designation
SKF BSD 30 62 C GA 2RZ
NSK 30 TAC 62 B DDG SU C10 PN7BFAG BSB 030 062 2Z T NTN BST 30X 62 1B LXL NACHI 30 TAB 06 U 2NK GM P4 SNFA BS 30 62 S 7 P 62 U M
SKF FBSA 206/QBCA
Manufacturer Designation
SKF FBSA 2 06 QBC A
NSK WBK 30 DBB 31 SNFA BSQU 2 30 TDT 430 IBC BSBU 30 Q C 88 M
SKF super-precision angular contact thrust ball bearings for screw drives single direction (BSA and BSD series) (1), universally matchable for mounting as sets (2); cartridge units with a flanged housing (FBSA series) (3)
1
2
3
20
nnBearing series
Manu-facturer
Designation
SKF BSA 2 BSA 3 BSD FBSA
NSK BSB • TAC WBK . . 31 1)
FAG 7602 7603 BSB •NTN • • BST •NACHI • TAB • •SNFA BS2 • BS BSDU/BSQUIBC • • • BSBU
nnBearing size
Manu-facturer
Designation Bore diameter [mm]
SKF 1) 2) 1) 2)
NSK 2) 2)
FAG 1) 2) 1) 2)
NTN 2) 2)
NACHI 2) 2)
SNFA 2) 2)
IBC 2) 2)
1) from 04 and up ¥5 (for example 04 = 20 mm bore diameter)2) bearing size 20 = 20 mm bore diameter, 25 = 25 mm, etc .
nnDesign features
Manu- facturer
Designation
SKF C – 1)
NSK B – 1)
FAG – 1) – 1)
NTN – 1) – 1)
NACHI – 1) – 1)
SNFA 62 PIBC Q2) A2)
IBC D2) B2)
1) – no designation suffix2) only housing form and execution
nnExecution and preload
Manu-facturer
Designation
SKF ◼ A B G…
NSK • C10/31 • •FAG L M H •NTN 11B 1B • •NACHI • M • •SNFA L M F . . .daNIBC L M H •
nnSealing solutions
Manu- facturer
Designation
SKF –2RZ –2RS
NSK • DDGFAG 2Z 2RSNTN • LXLNACHI 2NK 2LRSNFA S CIBC • •
nnTolerance class
Manu-facturer
Designation
SKF – 1) – 1) ◼ ◼
NSK PN7B • • •FAG – 1) – 1) • •NTN P5 P4 • •NACHI P5 P4 • •SNFA 5 7 9 SQIBC – 1) – 1) • •
1) – no designation suffix
nnBearing set arrangement
Manu- facturer
Designation
SKF DB DF DT TBT TFT TT QBC QFC QBT QFT QT
NSK DB DF DT DBD DFD DTD DBB DFF DBT DFT DTTFAG DB DF DT TBT TFT TT QBC QFC QBT QFT QTNTN DB DF DT DBT DFT • DTBT DTFT • • •NACHI DB DF DT FFB BFF FFF FFBB BBFF FFFB BFFF •SNFA DD FF T TD TF 3T TDT TFT 3TD 3TF 4TIBC – 1) DF DT TBT TFT TT – 1) QFC QBT QFT QT
1) – no designation suffix
1) WBK = support unit symbol; 31 = serial number
21
SKF super-precision angular contact thrust ball bearings for screw drives designation system
Bearing series
BSA 2 Single direction bearing in the 02 ISO dimension seriesBSA 3 Single direction bearing in the 03 ISO dimension seriesBSD Single direction bearingBEAS Double direction bearingBEAM Double direction bearing for bolt mountingFBSA 2 Cartridge unit with a flanged housing
Bearing size
For single direction bearings in accordance with an ISO dimension series01 12 mm bore diameter02 15 mm bore diameter03 17 mm bore diameter04 (¥5) 20 mm bore diameterto15 (¥5) 75 mm bore diameter
For single direction bearings, not standardized2047 20 mm bore diameter and 47 mm outside diameterto60120 60 mm bore diameter and 120 mm outside diameter
For double direction bearings008032 8 mm bore diameter and 32 mm outside diameterto060145 60 mm bore diameter and 145 mm outside diameter
Design features
C Improved internal design (single direction bearings only)A Different flange position (cartridge units only)
Single direction bearing – execution and preload
GA Universally matchable, light preloadGB Universally matchable, moderate preloadG… Universally matchable, special preload, expressed in daN e .g . G240
Sealing solutions
-2RS Contact seal on both sides, NBR-2RZ Non-contact seal on both sides, NBR
Examples: Single direction bearing – BSA 205 CGB/GMM BSA 2 05 C GB / GMMMatched set of single direction bearings – BSA 208 C/TFTA BSA 2 08 C / TFT ADouble direction bearing – BEAM 030080-2RS/PE BEAM 030080 -2RS PECartridge unit – FBSA 206 A/QBCA FSBA 2 06 A QBC A
22
Bearing set – preload
A Light preloadB Moderate preloadG… Special preload, expressed in daN e .g . G240
Bearing arrangement
DB Set of two bearings arranged back-to-back <>DF Set of two bearings arranged face-to-face ><DT Set of two bearings arranged in tandem <<TBT Set of three bearings arranged back-to-back and tandem <>>TFT Set of three bearings arranged face-to-face and tandem ><<TT Set of three bearings arranged in tandem <<<QBC Set of four bearings arranged tandem back-to-back <<>>QFC Set of four bearings arranged tandem face-to-face >><<QBT Set of four bearings arranged back-to-back and tandem <>>>QFT Set of four bearings arranged face-to-face and tandem ><<<QT Set of four bearings arranged in tandem <<<<
Tolerance class
– Dimensional accuracy to ISO tolerance class 4, running accuracy to ISO tolerance class 2
PE Enlarged diameter tolerance and axial run-out to P5 tolerance class for radial bearing (BEAM/BEAS series only)
Grease fill
GMM Open single direction bearing filled with standard grease
Examples: Single direction bearing – BSA 205 CGB/GMM BSA 2 05 C GB / GMMMatched set of single direction bearings – BSA 208 C/TFTA BSA 2 08 C / TFT ADouble direction bearing – BEAM 030080-2RS/PE BEAM 030080 -2RS PECartridge unit – FBSA 206 A/QBCA FSBA 2 06 A QBC A
23
® SKF is a registered trademark of the SKF Group .
© SKF Group 2015The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted . Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein .
PUB BU/P2 15530 EN · February 2015
Certain image(s) used under license from Shutterstock .com
Seals Bearings and housings
Lubrication systems
Mechatronics Services
The Power of Knowledge EngineeringCombining products, people, and application- specific knowledge, SKF delivers innovative solutions to equipment manufacturers and pro-duction facilities in every major industry world-wide. Having expert ise in multiple competence areas supports SKF Life Cycle Management, a proven approach to improv ing equipment reliabil-ity, optimizing operational and energy efficiency and reducing total cost of ownership.
These competence areas include bearings and units, seals, lubrication systems, mecha tronics, and a wide range of services, from 3-D computer modelling to cloud-based condition monitoring and asset management services.
SKF’s global footprint provides SKF customers with uniform quality standards and worldwide product availability. Our local presence provides direct access to the experience, knowledge and ingenuity of SKF people.
SKF BeyondZero is more than our climate strategy for a sustainable environment: it is our mantra; a way of thinking, innovating and acting.
For us, SKF BeyondZero means that we will reduce the negative environmental impact from our own operations and at the same time, increase the positive environmental contri bution by offering
our customers the SKF BeyondZero portfolio of products and services with enhanced envir on-mental performance characteristics.
For inclusion in the SKF BeyondZero portfolio, a product, service or solution must deliver signifi-cant environmental benefits without serious envir onmental trade-offs.
skf.com