Superslim - RMD Kwikform€¦ · Applications Available in nine lengths, and with a comprehensive range of accessories, the Superslim Soldier can be assembled into: Wall formwork

RMD Kwikform United KingdomSuperslim

PRODUCT BROCHURE

Product OverviewThe Superslim soldier is the definitive formwork primary beam. Robust and easily assembled into beams of almost any length, the Superslim soldier can be used in numerous temporary works applications.

FasterStandard fixtures and clamps ensure optimum on site efficiency.

Formwork ties and other components can be fixed almost anywhere along the Superslim Soldier's length allowing for best on site productivity and optimum scheme design.

Robust to cope with the demands of frequent reuse providing easy assembly and consistency for optimum fabrication on site.

SaferManufactured from high yield steel to provide maximum load capacity.

Proven performance time after time.

EasierCompatible with all other RMD Kwikform product ranges making it extremely versatile.

Huge range of standard accessories provide the versatility to tackle an almost limitless range of applications.

Superslim The definitive formwork primary beamPRODUCT BROCHURE

1

ApplicationsAvailable in nine lengths, and with a comprehensive range of accessories, the Superslim Soldier can be assembled into:

Wall formwork panels of virtually any shape or size

Bridge cantilever edge and deck supports

Composite bridge deck formwork

Travelling gantries

Vertical and raking shores

Spanning beams and trusses

Support structures for temporary site buildings

Façade retention / space frames


2

Features & BenefitsThe Superslim Soldier has unrivalled strength-to-weight ratio, versatility and range of accessories and can be re-used on site after site, in numerous temporary works applications.

Any length of beamNine standard lengths, from 10mm to 3600mm, give almost unlimited scope for assembling beams of virtually any length.

VersatileVersatlity to tackle diverse applications demanded by major projects - gantries, shoring, spanning trusses and frames, as well as formwork panels.

CompatibleFully compatible with other RMD Kwikform product ranges and, in many cases, with customers’ own equipment.

Freedom to createComplete freedom to create the optimum design, whatever the application.

Precisely manufacturedCombines maximum durability and load capacity with reduced unit weight.

RobustEasy assembly and consistently accurate fabrication on-site.


3

In DetailCan be assembled into practically any lengthBecause they can be assembled into practically any length, Superslim soldiers are frequently used as raking push-pull props, as well as vertical shoring.

Ideal as primary beamsSuperslim soldiers are ideal as primary beams on shoring or scaffolding to support reinforced concrete slab construction.

Can be assembled with ease into frames and trussesUsing system clamps, scaffold tube and other accessories, Superslim soldiers can be assembled with ease into frames and trusses for façade retentions, multi-level supports to temporary site offices, cantilever supports, exhibition stands and film sets.

Construct straight, curved, conical or other formwork configurationsWhen using a plywood form face together with one of RMD Kwikform’s Aluminium secondary beams or timber beams, Superslim soldiers can be used to construct straight, curved, conical or other complex formwork configurations: RMD Kwikform supplies brackets for attaching access walkways on formwork panels.


4

ProjectsPROJECTThird Millenium Bridge

REGIONEurope

STRUCTURESBridges, Roads

PROJECTBirmingham New Street Station

REGIONEurope

STRUCTURESRail

PROJECTJebel Ali Sewage Treatment Plant

REGIONMENA

STRUCTURESIndustrial

PROJECTPhosphate Hangar

REGIONAfrica

STRUCTURESIndustrial, Mining

PROJECTA34 Wolvercote Viaduct Replacement

REGIONEurope

STRUCTURESBridges

PROJECTAberdeen's Marischal College Conversion

REGIONEurope

STRUCTURESRepair Maintenance and Improvement


5

Components

Code Description Weight

SSX13600 Superslim Soldier 3600mm 72.2kg







SSU10035 Superslim Soldier - 360mm O/E 11.7kg

SSU10045 Superslim Soldier 360mm H/Shoe 11.7kg


SSX10040 Superslim End Plate 10mm 2.9kg

Superslim Soldier Beams

AWL = 20kNm bending / 150kN tension


SSU10010 Superslim Joint Stiffener 1.4kg

BNU16013 M16x110 Bolt Gr8.8 BZP 0.2kg

BNU16001 M16 Nut gr8 BZP 0.03kg

Joint Stiffener

AWL = 30kN / pair


SSU10032 Superslim Lifting Plate 15kN 3.2kg

SSX10046 Superslim 19mm Pin & R Clip 0.3kg

Lifting Plate

AWL on the bracket = 3.2kN UDL


SSU10031 Superslim Access Bracket 6.7kg

Access Bracket


SSU10016 Superslim Turnbuckle 914-1160 8.4kg

SSU10033 Superslim Plumbing Foot 11.5kg

SSX10046 Superslim 19mm Pin & R Clip 0.3kg

Turnbuckle and Plumbing Foot


6

Components

AWL = 10kN


SSX10042 Superslim Form Support Plate 5.3kg

BNU16007 M16x40 Set Pin gr8.8 BZP 0.09kg

BNU16001 M16 Nut gr8.8 BZP 0.03kg

Support Plate

Connects Soldiers to timber waling


BNU10054 Bolt - Metric Waling 117x117 0.3kg

BNU10055 Bolt - Metric Waling 176x127 0.4kg

SSU10017 Waling Clamp Plate 0.4kg

BNX20014 Washer - Plate 50x50x6x18mm 0.1kg

BNU16001 M16 Nut gr.8.8 BZP 0.03kg

Timber Waling Clamp Assembly

AWL = 3.25 kN / pair


RPX10005 "B" Clamp 0.7kg

B Clamp

Connects scaffold tube to the soldier (does not project above the tube surface)


BNX16007 M16x220 Bolt gr8.8 BZP 0.4kg

BNX20020 Washer - Channel 150x75x18mm 0.7kg

RPX10008 'G' Clamp - Tube Type M16 0.6kg

'G' Clamp

AWL = 6.25kN in slip / each


SSU10024 Slimshor Tube Clamp 1.3kg

Slimshor Tube Clamp


7

Components


SFX10018 Half Coupler 0.5kg

BNU16008 M16x40 Set Pin gr8.8 C/Snk HTZP 0.05kg


Half Coupler


SSU10017 Superslim Waling Clamp Plate 0.4kg

BNU16002 M16 Round Washer BZP 0.1kg

BNU16013 M16x110 Bolt gr8.8 BZP 0.2kg


Waling Clamp Plate


AFX20015 Clamp - Superslim 0.14kg

AFX20022 Bolt M12 Uni-fix 0.05kg


AFX20012 Clamp Assembly - Superslim 0.2kg

Alform Superslim Clamp


ALX10001 Universal Clamp 0.7kg

Universal Clamp


ALX10002 Flange to Flange Wedge Clamp 0.5kg

Flange to Flange Wedge Clamp


8

Components


ASX10056 Alshor Superslim Clamp 0.7kg

Alshor Superslim Clamp


BTX10014 Waler Plate - Light 55kN 1.1kg

BTX10021 Waler Plate - Standard 70kN 1.4kg

BTX10004 Waler Plate - Heavy Duty 90kN 1.8kg

15mm Rapid Tie Waler Plates


HTU10014 Waler Plate - Angle 3/4" 70kN 1.3kg

15mm Rapid Tie Angle Waler Plates


BTX10029 Waler Plate - Hi Load 160kN 6.8kg

20mm Rapid Tie Waler Plates


SSX10039 Porthole Bearing 65kN 2.0kg

Porthole Bearing

Spreads and transfers loads from Superslim props where length adjustment is necessary - AWL=150kN (100kN when load is released via the jack handle).


SFU10025 Superslim Adjustable Base 365-515mm 19.0kg

Adjustable Base


9

Components

Supports header beams where length adjustment is required - Adjustable range 440-590mm - AWL= 150kN ( 100kNwhere length adjustment is required)


SSU10026 Superslim Adjustable Head 440-590mm

24.6kg

AFX20003 Clamp Plate 0.1kg

BNX12009 M12x25 Set Pin gr8.8 BZP 0.04kg

BNC12002 M12x30 Set Pin gr8.8 BZP 0.04kg

Adjustable Rocking Head

Maximum angle of tilt = 28 degrees, AWL=150kN


SSU10023 Superslim Rocking Head 36mm 4.3kg

BNX10005 M10x20 Set Pin Gr 8.8 BZP 0.02kg

SSU10029 Rocking Head Washer - M10 Galv 0.02kg

Rocking Head


SSX10041 Superslim Prop Support Plate 6.3kg

BNX20027 M20x45 Set Pin gr8.8 BZP Csk 0.2kg

BNU20001 M20 Hex Nut gr8 0.06kg

Superslim Prop Support Plate

AWL = 65kN / Pivot


SSU10019 Superslim Corner Pivot 7.3kg

Corner Pivot

Connects a heavy duty push-pull prop to the porthole of another soldier - AWL = 65 kN


SSU10012 Spade End Link - Prop 3.1kg

SSU10004 Superslim Prop Pivot Tube 1.8kg

Prop Spade End Link & Prop Pivot Tube


10

Components

AWL = 100kN


SSU10038 Superslim Prop Connector 100kN 6.8kg

100Kn Prop Connector

Connects heavy duty push-pull props to Megashor - AWL = 100kN


SSU10013 Superslim Prop Tube End Link 2.9kg

SSX10051 Superslim Short Prop Tube End Link 1.8kg

Prop Tube End Links

Converts soldiers into heavy duty push-pull props - Adj Range = 405-635mm / AWL = 100 kN


SSU10007 Superslim Prop Jack (LH) 14.5kg

SSU10008 Superslim Prop Jack (RH) 14.5kg

Prop Jacks LH and RH

Connects heavy duty push-pull props to a surface - AWL = 100 kN


SSU10034 Superslim Tilt Plate 4.8kg

BNU24001 Nut - Hexagon M24 0.06kg


Tilt Plate

Used in horizontal & vertical plumbing & levelling applications. Range 115mm closed to 400mm fully open.


SSX90043 Superslim Universal Soldier Jack 5.6kg

Universal Soldier Jack


SSU10003 Superslim 90 Degree Corner 8.7kg

SSU10005 Superslim 45 Degree Corner 8.0kg

Corner Angles


11

Components

Range = 55 degrees min, 220 degrees max


SSU10028 Superslim Pivot Cleat set 8.8kg

Pivot Cleat Set


SSX10037 Superslim Pivot Corner 20mm 4.1kg

Pivot Corner

A node to connect six soldiers at right-angles


SSU20006 6-Way connector 25.0kg

6-Way connector


SSU20066 6 Way Double Connector 37.7kg

6-Way Double Connector

Secures the end of a soldier to a floor or wall - AWL: = 70 kN Tension / 90 kN Shear


SSU10036 Anchor Plate 7.40kg

Anchor Plate


SSX10048 Superslim Safety Latch 1.6kg

Safety Latch


12

Components


SSU10037 Superslim Klik Klak Latch 3.9kg

Klik Klak Latch


SSU10044 Klik-Klak Wall Pocket 1.7kg


BNU20003 M20 Round Washer BZP 0.03kg

Klik Klak Wall Pocket

Used to attach and spread chains in lifting applications - AWL = 45kN per unit. AWL of Spreader Beam = 90kN (see technical data sheets)


SSX10052 Spreader Beam Adaptor Assembly 9.4kg

Spreader Beam Adaptor


SSM00007 Fixed Strut Adaptor 16.0kg

SSM00008 Fixed Strut 2896mm 39.0kg

Fixed Strut & Adaptor


SSM10540 Single Sided Beam 540mm 16.0kg

Single Sided Beam


SSM00001 Single Sided Corner 540 x 540mm 30.0kg

Single Sided Corner


13

Components


BNU16007 M16x40 Set Pin gr8.8 BZP 0.09kg


BNU16008 M16x40 Set Pin gr8.8 BZP Csk 0.05kg


BNU20001 M20 Nut gr8 0.06kg

BNU24001 M24 Nut gr8 0.08kg

BNX20030 M20x90 gr8.8 BZP 0.28kg

BNX24001 M24x45 Set Pin gr8.8 BZP 0.26kg


SSX10046 Superslim 19mm Pin and R Clip 0.29kg

Bolts, Nuts and Pins


14

ServicesOur service sets us apart...

With over 85 years of experience in the temporary works industry we understand the many and varied challenges that our customers face, whatever the size of your project. Whilst our product range provides us with the capability of supporting your project, it is our people that will make the difference.

Sales SupportOur sales team comprises a vast wealth of experience in the sector, helping us to understand your challenges and the opportunities to save you time and money.

Engineered DrawingsYou will be provided with technical recommendations and layout drawings showing a level of detail sufficient to enable straight forward on-site erection. For specifically fabricated items comprehensive operating instructions will be provided.

Customer ServiceWe work with customers on all scale of projects and as such recognise that your requirements are all different. We provide a level of customer service to suit your requirements ranging from on site training to simple reordering of replacement parts.

Technical ExpertiseEvery project, large or small, requires unique system design. Our highly skilled team of engineers and technical experts will understand first your requirements, and provide a solution designed to exceed these. We do this through approaching projects with an open mind and a desire to provide the most appropriate solution.

SafetyRMD Kwikform prides itself on the inherent safety of our products and the solutions that we design. The construction industry's greatest asset is its people and we design schemes and solutions with this in mind at all times.


ContactsRMD KWIKFORM UNITED KINGDOMHEAD OFFICERMD Kwikform, Brickyard Road, Aldridge, Walsall, WS9 8BW, UKTel: +44 1922 743743Email: [email protected]

LONDON AND SOUTH EAST24 River Road, Barking, Essex, IG11 0DGTel: +44 1708 552975Fax: +44 1708 557048Email: [email protected]

MIDLANDSMidland Sales Centre,Stubbers Green Road, Aldridge, Walsall, WS9 8BLTel: +44 1922 450800Fax: +44 1922 450896Email: [email protected]

NORTH8 Peel Road, Skelmersdale, WN8 9PTTel: +44 1942 273815Fax: +44 1942 273819Email: [email protected]

SCOTLAND1650A London Road, Glasgow, G31 4QGTel: +44 141 554 7425Fax: +44 141 554 8392Email: [email protected]

WALES AND SOUTH WESTPenarth Road, Cardiff, Glamorgan, CF11 8UPTel: +44 29 2037 4521Fax: +44 29 2023 8703Email: [email protected]

WORLDWIDE CONTACTSRMD AUSTRALIATel: +61 (08) 8179 8200Fax: +61 (08) 8179 8201Email: [email protected]

RMD NEW ZEALANDTel: Tel: 9 259 0353Fax: Fax: 9 276 6732Email: [email protected]

RMD KWIKFORM HONG KONGTel: +852 2415 4882Fax: +852 2745 0232Email: [email protected]

RMD KWIKFORM SINGAPORETel: +65 6863 4252Fax: +65 6863 4275Email: [email protected]

RMD KWIKFORM PHILIPPINESTel: +632 696 7635Fax: +632 661 6456Email: [email protected]

RMD KWIKFORM UAETel: +971 6 553 4173Fax: +971 6 553 4327Email: [email protected]

RMD KWIKFORM QATARTel: +974 4465 3034Fax: +974 4465 3282Email: [email protected]

RMD KWIKFORM BAHRAINTel: +973 1738 2724Fax: +973 1738 2624Email: [email protected]

RMD KWIKFORM OMANTel: +968 2413 7828Fax: +968 2413 7998Email: [email protected]

RMD KWIKFORM SAUDI ARABIATel: +966 13 896 8665Fax: +966 13 896 8664Email: [email protected]

RMD KWIKFORM INDIATel: +91 44 6693 3300Email: [email protected]

RMD CHILETel: +56227149800Email: [email protected]

RMD KWIKFORM USATel: +1 303 252 7000Fax: +1 303 252 7319Email: [email protected]

RMD KWIKFORM SOUTH AFRICATel: +27 12 004 1000Email: [email protected]

RMD KWIKFORM IRELANDTel: +353 (0)1 830 2500Fax: +353 (0)1 830 2741Email: [email protected]

RMD KWIKFORM ESPAÑATel: +34 91 555 6104Fax: +34 91 555 4745Email: [email protected]

RMD KWIKFORM DBMETel: +971 6 553 4173Fax: +971 6 553 4327Email: [email protected]

RMD KWIKFORM PANAMATel: +507 280.0869Email: [email protected]

RMD KWIKFORM COLOMBIATel: +57 321 214 71 18Email: [email protected]


www.rmdkwikform.comOur policy is one of continuous improvement and we reserve the right to change, alter or modify any detail, design, capacity, weight, dimension or code without prior notice being given.

The arrangements of equipment shown in photographs may have been assembled by others and therefore not reflect current best working practices or legislation requirements.

An Interserve Company

http://www.rmdkwikform.com

Documents

Superslim - RMD Kwikform€¦ · Applications Available in nine lengths, and with a comprehensive range of accessories, the Superslim Soldier can be assembled into: Wall formwork