Upload
trinhthien
View
217
Download
0
Embed Size (px)
Citation preview
SUPPLEMENTALINSTRUCTIONFor ISUZU Automatic 2008 MY600 AISIN Transmission
This diagram shows the correct porting that is to be used when con-necting the Muncie PTO to the Aisin 6-speed automatic transmission used in 2008 and later model year Isuzu vehicles. The TG Series PTO uses only the top lubrication port to lubricate the PTO.
The CS6 Series PTO uses the top lubrication port as well as the main pressure port, located on the left side of the transmission in front of the PTO opening.
The solenoid activation valve sup-plied with the PTO connects to the main pressure port.
IN07-07 (Rev. 12-15) Printed in the U.S.A.© Muncie Power Products, Inc. 2015
Muncie Power Products, Inc. Member of the Interpump Hydraulics GroupGeneral Offices and Distribution Center • P.O. Box 548 • Muncie, IN 47308-0548
(765) 284-7721 • FAX (765) 284-6991 • Email [email protected] Website http://www.munciepower.com
Drive Products, Exclusive Agents for Canada, ISO Certified by an Accredited Registrar
®
Lubrication Port(4-22 PSI)
Main Pressure Port(116-260 PSI)
AISIN MY600 ISUZU (465) 2008 Model Year & Later
LUBRICATION PORT
TG or CS PTO1/2 - 20UNF-2BUse 43T39222 Fitting
MAIN PRESSURE PORT
CS PTO Only1/2 - 20UNF-2BUse 43T39222 Fitting
TOP VIEW
LEFT SIDE VIEW