Embed Size (px)
Citation preview
PRODUCT DATA SHEET Pump House flexi-LITE-KIT
SUPPORT SYSTEMS
Pump HouseGlaisdale Drive East, Nottingham, NG8 4LYTel ~ 0115 900 5858 Fax ~ 0115 929 4468
Email ~ [email protected] Website ~ www.pumphousepumps.com
Material
Rubber Compression moulded using milled, sieved and graded, recycled rubber bound with high quality adhesive. Density 1.0g/cm³. Working temperature range -10°C to +75°C
Strut 41mm x 21mm x 1.5mm galvanised steel
Fixing Plate M8 (metric course thread) x 20mm, zinc plated steel, through inserts. Maximum torque 15 Nm. Maximum Load 25kg
The flexi-LITE is a low cost innovative solution for floor mounting air source heat pumps and avoids the need for high cost and time consuming concrete slabs.
The flexi-LITE can be delivered to site and with minimum ground works can be assembled and provide an external fixing point with built in anti vibration characteristics for all sizes of heat pumps.
The flexi LITE-KIT (FF-UC3)
LIST OF COMPONENTS
• 2 x Anti vibration Mounting Feet 41mm x 21mm galvanised steel strut.
• 1 x lightweight slab 1200mm x 600mm x 75mm
• 1 x FIXING KIT : • 4 x M8 Threaded Plate. • 4 x M8 Nuts. • 4 x M8 Washers. • 4 x Spring nuts.
Part Code Description Length Width Height Weight Max. Load*
FF-UC3 FLEXI - LITE KIT 1200 mm 600 mm 175 mm 25.5 kg 600 kg
Pad 1200mm x 600mm x 75mm (encapsulated polystyrene core pad reinforced with textured cement coating)
