Upload
vuthuy
View
433
Download
2
Embed Size (px)
Citation preview
2
From: Director, Surface Commander’s Course (SCC), Surface Warfare Officer’s School Command
To: Surface Commander’s Course Students
Subj: WELCOME TO THE SURFACE COMMANDER’S COURSE (SCC)
1. Congratulations. Welcome back to the Center for Surface Warfare Excellence! SWOS is dedicated to
providing you with the most relevant and thorough instruction possible. Or goal is to refresh and refine your
Surface Warfare core competencies in warfighting, management and leadership in a way that best positions
you for success upon your return to the Fleet in a demanding leadership position.
2. Expectations. The Surface Commander’s Course (SCC) is a combination of the Senior Officer Ship
Material Readiness Course (SOSMRC) and the XO/CO Fleet-Up course. This course is designed to build
upon and sharpen your competency in advanced seamanship, material readiness, warfighting principles and
command management. Our post-command instructors will also provide experience-based perspective, best-
practices and mentorship to facilitate thought-provoking discussions with you and your peers on leadership
challenges you may face on the waterfront. A personal investment of time, collaboration and preparation is
required to fully capitalize on the value of the SCC course of instruction.
3. Course Content. The following is a general overview of the topics, requirements, and assessments we
will leverage to maximize your preparedness for your upcoming tour:
Week 1 – Courtesy check-in BCA and Naval Seamanship and Shiphandling Week 2 – Shiphandling and Bridge Resource Management, RoR Exam Week 3 – Material Readiness (Common Core) Week 4 – Material Readiness (Common Core/Ship Specific) Week 5 – Maintenance University & Material Readiness (Ship Specific) Week 6 – COAT, ADAMS, Guest Lectures (PERS/JAG/ATG) Week 7 – Maritime Warfare, Official BCA Week 8 – Maritime Warfare, Shiphandling Assessment, & Official PRT Week 9 – Command Management, Firefighting Trainer, & CQA Opportunity Week 10 – Shipride with SWOS Mentor
4. Admin & Logistics. Lodging arrangements and introductory admin details are included in the text of the
welcome e-mail. Please review them thoroughly. Whatever your individual needs dictate, be sure to review
the Joint Travel Regulations regarding dependent lodging, per-diem allowances, and meal rates. Your
primary point of contact for coordination or to address any questions you may have prior to arrival is LCDR
Jeff Servello, [email protected]; DSN: 841.1307, COMM: 401.841.1307. Please also feel free to
contact me directly at [email protected] or 401.841.2962. We very much look forward to your arrival
and are standing by to assist you any way we can to prepare you for success in the fleet.
3
Table of Contents 1. Surface Commander’s Course Overview……………………………………………………………………….………….4
2. Navigation, Seamanship, and Shiphandling Overview………………………………………………………………6
a. NSS Lessons and References……………………………………………………………………………....….......7
3. Senior Officer Ship Material Readiness Course (SOSMRC)
a. SOSMRC Overview and Deliverables……………………………………………………………………...….10
b. Common Core Lessons and References………………………………………………………..…....……..11
c. LCS-1 Specific Lessons and References……………………………………………………………...……….22
4. Maritime Warfare……………………………………………………………………………………………….……….………..27
a. Maritime Warfare Lessons and References………………………………………………......………….28
5. Command Management………………………………………………………………………………………………………..33
a. Command Management Lectures and References…………………………………………….……….34
4
The Surface Commander’s Course (SCC)
COURSE OVERVIEW SCC is divided into 4 modules, covering Navigation, Seamanship, and Shiphandling (NSS), Material Readiness (SOSMRC), Maritime Warfare, and Command Management. The course will refresh and refine your existing knowledge and sharpen your skills from a command leadership perspective.
COURSE PREPARATION Your success in both SCC and your Command Tour is directly related to your level of preparation. You should use this handbook to review references in advance and also spend time reviewing Rules of the Road. There are ample resources available at SWOS and the entire command across all directorates is standing by to assist you in any way needed. Come to SWOS with a solid understanding of your weaknesses and be prepared to ask for help early and often.
COURSE SCHEDULE SCC is a 10-week course, consisting of 9 weeks of classroom training followed by a one week shipride in a fleet concentration area. This schedule includes 2 weeks of shiphandling including a combination of classroom instruction, Bridge Resource Management, a Rules of the Road exam, simulator practice, and a culminating shiphandling assessment. This module is followed by SOSMRC which includes 2 weeks of common core engineering and 2 weeks of platform specific training. SOSMRC is followed by 2 weeks of Maritime Warfare instruction, and 1 week of Tactical Trainers and Command Management instruction.
Week 1 – Courtesy check-in BCA and Naval Seamanship and Shiphandling Week 2 – Shiphandling and Bridge Resource Management, RoR Exam Week 3 – Material Readiness (Common Core) Week 4 – Material Readiness (Common Core/Ship Specific) Week 5 – Maintenance University & Material Readiness (Ship Specific) Week 6 – COAT, ADAMS, Guest Lectures (PERS/JAG/ATG) Week 7 – Maritime Warfare, Official BCA Week 8 – Maritime Warfare, Shiphandling Assessment, & Official PRT Week 9 – Command Management, Firefighting Trainer, & CQA Opportunity Week 10 – Shipride with SWOS Mentor
5
The Surface Commander’s Course (SCC) EXAMS and REQUIREMENTS During your time at SWOS, you will be required to take several examinations and assessments. These requirements include:
Shiphandling Assessment - PASS/FAIL
Rules of the Road Exam - 90%
Common Core Engineering - 75%
Platform Specific Engineering - 75%
Maritime Warfare - 75%
Command Qual Exam (As Required)
In addition to the formal exams listed above, you will receive continuous mentoring from a post-command officer while at SWOS. Using a combination of tests, quizzes, peer evaluations, observed shiphandling sessions, class participation, and practical role-playing scenarios, your mentor will guide you in the areas that you may be deficient in. The goal is to help you identify areas that you may want to improve on before arriving to your prospective command.
6
Navigation, Seamanship, and Shiphandling (NSS)
MODULE OVERVIEW The NSS portion of SCC occurs primarily during the first two weeks of instruction. During these two weeks, students will receive Rules of the Road refresher lectures along with lessons on associated topics in shiphandling, navigation, VMS, and ARPA. Week two is dedicated to Bridge Resource Management. While the majority of NSS is taught during the first two weeks, additional topics are covered throughout SCC to include case studies and COVE sessions and assessments. DELIVERABLES During NSS, students are will be required to pass several exams/assessments and produce various products. These include:
Navigation and Seamanship Pre-test - Ungraded
Rules of the Road Exam – 90% required score
BRM Practical – Pass/Fail
Chartlet of Student’s Homeport – Pass/Fail
COVE Transit/Mooring – Pass/Fail
PPOT Scenario – Pass/Fail
Navigation Plan/VM Practical – Pass/Fail
NAVDORM P-Work – Pass/Fail
7
Navigation, Seamanship, and Shiphandling (NSS)
NSS-1: CHARTLET EXERCISE Students will be required to produce a Chartlet for their prospective homeport. This will be a reproduction of your homeport and requires students to accurately identify all soundings, piers, NAVAIDS, anchorages, notes, and much more. References include:
Specific homeport chart
Sailing Directions NSS-2: NAVDORM P-WORK Students are required to answer questions on their own time which reference the most current NAVDORM. NSS-3: NAVIGATION BASIC PRINCIPLES Students will understand basic principles to be observed in keeping an effective navigation watch. These principles include charts, datums, plotting fixes, radar ranges, and nautical publications and resources. NSS-5: CASE STUDY This case study includes discussion of the factors that led to the grounding of the USS PORT ROYAL and considers lessons learned and how future incidents can be prevented. NSS-6: SHIPHANDLING NSS-6 is a workshop designed to reinforce the fundamentals of shiphandling. This lecture covers forces which act upon a ship, mooring lines, anchoring, and tugs. References include:
Naval Shiphandler’s Guide, CAPT James Barber (Ret)
Shiphandling for the Mariner, Dan MacElrevey
Shipboard Bridge Resource Management, Michael Adams
Knight’s Modern Seamanship, Edited by John Noel (18th Ed) NSS-7: RULES OF THE ROAD NSS-7 is a deep-dive into the COLREGS and provides a Rules of the Road refresher by CAPT Todd Chlaupek. Following this lesson, students will be assessed with a required passing score of 90%. Reference include:
Navigation Rules & Regulations Handbook – August 2014 Edition (with updates) NSS-8: HEAVY WEATHER Understand dangerous weather patterns and phenomena that mariners will encounter at sea, and understand the mariner’s role in keeping the ship safe during heavy weather events. NSS-9: ARPA LAB NSS-9 is a hands on lecture giving students an overview and refresher of VMS and ARPA operation, capabilities, and limitations. NSS-10: COVE Students will be given multiple opportunities to drive their designated ship class in the COVE simulators. Students will have Master mariners available for coaching as well as plenty of time for practice to gain comfort prior to the shiphandling assessment.
8
Navigation, Seamanship, and Shiphandling (NSS)
NSS-11: VOYAGE MANAGEMENT SYSTEM (VMS) DESCRIBE the function and operation of VMS and participate in a hands-on lab exercise operating VMS. References include: VMS Operator Manual NSS-12 TO 19: BRIDGE RESOURCE MANAGEENT (BRM) Provides the student with an overview of Bridge Resource Management (BRM) including contributing factors and mitigation principles for human error, elements of BRM, and methods for increasing safety and efficiency on the bridge. BRM also includes a Voyage Planning practical exercise and simulator scenario. NSS-20: MOBOARD REVIEW Refresher training and practice problems of several MOBOARD scenarios to include CPA, closing course/speed, avoidance, wind, and stationing. NSS-21: SPECIAL EVOLUTIONS This lesson covers the specifics of various special evolutions that the U.S. Navy conducts. These evolutions include UNREP, Med Moor, and Mooring to a Buoy. References include:
CNSP/CNSLINST 3180.2 – Underway Replenishment Guide
NTTP 4-01.4 – Underway Replenishment Guide
CDS 24 Med Moor Lessons Learned Document
10
SOSMRC MODULE OVERVIEW SOSMRC is approximately four weeks long and focuses on Material Readiness, including general engineering, combat systems, and platform specific engineering plants. There are 2 exams during SOSMRC; one during the Common Core section and one during platform specialty. To facilitate learning and exam success, there will also be various level of knowledge checks that require a 75% passing grade, but are not calculated into the final grade. Students will attend Maintenance University during the platform-specific portion of SOSMRC. Additionally, students will receive practical training in galley habitability at the Naval Supply School and participate in Firefighting Team Trainer. SOSMRC includes a 1-week shipride on the student’s prospective platform which enable students to apply classrooms lessons to a real-world environment, and gain practical knowledge from fleet engagement. DELIVERABLES During SOSMRC, students are required to produce several products. Students will deliver presentations on platform specific SRA/Ship Maintenance Availabilities (Team Exercise), Restricted Maneuvering Doctrine (Individual Exercise), and an INSURV Seminar (Team and Individual Exercise). In addition, students will be required to draw from memory a Main Space Layout and various engineering diagrams such as Lube/Fuel Oil systems, Electrical Distribution systems, and Firemain. SELF-STUDY LESSONS During the common core portion of SOSMRC, students will review several lessons on their own through reading references and required readings. These lessons will be briefly reviewed with an instructor, however students are required to review these on their own. These lessons include:
CC-154: Replenishment Stations
CC-254: EOSS/CSOSS
CC-257: Legal Records and Operating Logs
CC-263: Tagout/SOMS
CC-270: NAVOSH Programs
CC-280: Engineering Mechanical Fundamentals (Parts 1 & 2)
CC-281: Engineering Electrical Fundamentals
11
SOSMRC
COMMON CORE LESSONS & REFERENCES
CC-100: C5I/AIT This lesson covers issues associated with C5I Alterations and Equipment Installations,
including types of alterations, personnel involved and their roles, and common pitfalls. References include:
AIT Team Manual, SL720-AA-MAN-030, CH 3, Appendix H JFMM Vol 2, Part 1, Chapter 2
OPNAVINST 4700.7 Series – Maintenance Policy for United States Ships
CC-106: SYSTEM OPERABILITY TESTS (SOTS) CC-106 covers the purpose and process of
SOTS, including common issues and your role as a leader. This lesson also covers what is provided by SESEF.
References include:
MIP 8443 SESEF Test Evaluation Manual, CH 2
CC-114: CYBER SECURITY CC-114 teaches students the requirements for maintaining and securing
a shipboard network, including maintenance requirements and Cyber Inspection requirements and reports.
References include:
DODI 8570.01 Series, CH 2 – IA Workforce Improvement Program
SECNAVINST M-5239.2 Series - DON IA Workforce Management Manual
COMNAVCYBERFORINST 5239.1 Series - IA Workforce Improvement Program
COMNAVCYBERFORINST 5239.2 Series - CO’s IA Handbook
CNSP/CNSL 3502.3, SFRM INSURVINST 4730.27 Series - Information Systems Material and Security
CC-118: WAVEGUIDE, ANTENNA, & RADAR CC-118 covers wave propagation theory, and
generic RADAR principles as well as weatherproofing and mast inspections. References include:
NAVEDTRA Manuals 14092, 14182, 14183, 14089, and 10277
NAVEDTRA 14089, Vol IV, CH 1 – Radar Systems
NAVTECHMAN SE-200-AA-HBK-010, Tables 11/12 – Handbook for Shipboard Surveillance Radars
NAVEDTRA 14190, CH 1 – Radar Principles
SW272-AA-AEG-010 – AEGIS SPY-1A Tech Manual MIPs 4515/4516/4517/4524/4560
CC-119: COMBAT SYSTEMS PROGRAMS Discusses CS Programs including Electromagnetic
Radiation, HERO/HERP/HERF, CS Smooth Log, 2M Repair, SERT, and WFIPs. References include:
WFIP 52J & 84L – CS Smooth Log and 2M Repair
JFMM Vol VI, CH 4, 8
NAVSEA OP 3565, Vol I/II – Electromagnetic Radiation Hazards
OPNAVINST 5100.19 Series, CH B-9 – Radiation Safety
CNSP/CNSL 4790.5 – Command Technical Library Management Certification Program
12
SOSMRC
COMMON CORE LESSONS & REFERENCES
CC-127: DCPO and DC Maintenance Covers installed and portable Damage Control equipment and the DCPO program requirements and challenges. References include:
NTTP 3-20.31 - Surface Ship Survivability
NSTM 555 – Surface Ship Firefighting
NSTM 079 Vol II – Practical Damage Control
NSTM 505, CH 7.8.2 – Piping Systems
COMNAVSURFORINST 3541.1 Series – Repair Party Manual
NAVSEA SS-100-AG-MAN-010, Damage Control and Firefighting Layout Booklet
NAVSEA S5090-B1-MMO-010, Stowage Aid Booklet for Damage Control Equipment
NAVSEA S5090-B1-TAB-010, Training Aid Booklet for Damage Control Equipment
NAVSEA Damage Control and Fire Protection Engineering Website, www.dcfpnavymil.org CC-129: FIRE MAIN & MAIN DRAINAGE Covers components, maintenance, and functions of the Firemain and Main Drainage System. References include:
NSTM 079 Vol I and II – Practical Damage Control
OPNAVINST 5100.19 Series – Navy Safety and Occupational Health Program Manual (Afloat)
NSTM 505 – Piping Systems
NSTM 593 – Pollution Control
GENSPECS for Overhaul of Surface Ships,505, 534
NSTM 555, Vol I – Surface Ship Firefighting CC-130: GAS FREE ENGINEERING CC-130 details the basics of the Gas Free Program and the CO’s roles and responsibilities. References include:
NSTM 074, Vol III (Rev 5) – Gas Free Engineering
JFMM Vol IV, CH 25
OPNAVINST 5100.19 Series, CH B8 and Appendix B3
NAVSEA S6470-AA-SAF-010 – Naval Maritime Confined Space Program
29 CFR 1910.1000 – OSHA Genera Industry Air Contaminants Standard, Tables Z-1, Z-2, and Z-3
NIOSH 2005-149, pp. ix-xvi, Appendix E – Pocket Guide to Chemical Hazards
CNSP/CNSL 3502.3 – SFRM, Ch 4, Section 404
CNSP/CNSL 3500.11, CH 3, Section 316 – Surface Force Exercise Manual
CC-131: STABILITY Covers the basics of stability and the impacts of weight changes on center of gravity, buoyancy, metacentric height, and roll. References include:
NAVSEAINST 9096.3 – Weight and Moment Compensation for Naval Ships
OPNAVINST 9096.1 – Weight and Stability Limits for Naval Surface Ships
NSTM 079 Vol I, CH 2, 3, 10, 11 –Stability and Buoyancy
NSTM 079 Vol II, CH 42.1-42.12, 43.10, 43.11 – Practical Damage Control
NSTM 096, Section 2 – weight and Stability
OPNAV P-03C-01-89 Series, Cold Weather Handbook for Surface Ships
NAVSEA T9044-AE-MAN-010 – Surface Ship Hydrodynamic Safe Operating Envelope Certification
Ship’s Damage Control Book, Section III(a)
NTTP 3-20.31, CH 5.1-5.5 - Surface Ship Survivability
13
SOSMRC
COMMON CORE LESSONS & REFERENCES
CC-132: COLLECTIVE PROTECTION SYSTEM Understand the basic components, purpose, and functions of the CPS. References include:
NAVSEA SS200-AF-MMM-010, CH 1-6 – CPS Description, Operation, and Maintenance
NAVSEA SS200-AG-MMM-010 - CPS CBR Filter System
NTTP 3-20.31, CH 2.1.16-20, 7.8.2.1 - Surface Ship Survivability
JFMM Vol IV
OPNAVINST 5100.19 Series, CH B8
Navy Training System Plan for CPS – N76-NTSP-X-80-0407 CC-150: ANCHOR WINDLASS & CAPSTAN Covers the operation and maintenance requirements of the Anchor Windlass and Capstans. References include:
NSTM 581, CH 1-6 - Anchoring
NSTM 582, CH 6, 10 – Mooring & Towing
NAVSEA S9581-A8-MMA-010 or BQ-MMA-010 – Electro Hydraulic/Electro-Mechanical Windlass
NAVSEA 0901-LP-200-0001 – Winches & Capstans
GENSPECS for Overhaul of Surface Ships,581, 582
SIB Vol I, CH 581 & 582
Tag-Out User’s Manual
PMS 5811, 5821, A-005 CC-151: DAVITS & SMALL BOATS Understand the components, uses, maintenance issues, and safety features of davits and small boats. References include:
NSTM 583 Vol 1 – Boats and Small Craft
NSTM 233 Vol I– Diesel Engines
NSTM 541 – Ship Fuel and Fuel Systems
NSTM 542 – Gasoline and JP-5 Fuel Systems
NSTM 220 Vol III – Corrosion and Contamination Control of Diesel Engine Cooling
S9LPD-AW-SIB-010 Rev 1 – LPD Ship’s Information Book
PQS 43152 Series – Forces Afloat Small Boat Operations
CNSP Message R061812ZMAR12 – 7 Meter RHIB Advisory
CNSL Message R011359ZJUN12 – 7 & 11 meter RHIB Maintenance Guide CC-152: DECK GEAR & TACKLE Understand the purpose, operation, and safety features of deck gear, and describe MOBI, and lifesaving equipment. References include:
NSTM 077 - Personal Protective Equipment
NSTM 582 – Mooring and Towing
NSTM 583, Vol I – Boats and Small Craft
NSTM 600, Vol III – Hull Outfitting Equipment
NSTM 613 – Wire and Fiber Rope and Rigging
NSTM 634 – General Deck Coverings
NAVSEA SL-740-AA-MAN-010 – US Navy Towing Manual
RMG 080124ZAUG12 – CNSP – Inherently Buoyant Life Preservers
RMS 052102ZSEP12 – CNSL – Shipboard Lifelines PMS
14
SOSMRC
COMMON CORE LESSONS & REFERENCES
CC-153: HELO & AVIATION SUPPORT EQUIPMENT Understand the components needed to support safe aviation operations and their maintenance and alignment. Understand AVCERT requirements. References include:
CNSFINST 3700.1A, Encl 16 – AVCERT Checklist
NAVAIR Air Capable Ship Aviation Facilities Bulletin No. 1
NAVAIR Amphibious Assault Ships Aviation Facilities Bulletin No. 1
NATOPS Manual
NSTM 634 – Deck Coverings
NSTM 542 – Gasoline and JP-5 Systems
ATGLANT Users Guide – OCT 2015
ATGPAC Users Guide – JUL 2014
Aircraft NATOPS Refueling Manual – NAVAIR 00-80T-109
NWP 3-04.1 Series – Helo Operating Procedures for Air-Capable Ships
NAVAIR AD-700A1-MDB-000 – RAST System CC-178: DESALINATION, DISTILLATION & POTABLE WATER Understand the function, maintenance, safety and testing principles of desalination, distillation, and potable water systems. References include:
NSTM 531, Vol I, II, III – Desalination Reverse Osmosis Desalination Plants
CG-47 Propulsion Plant Manual, Vol I, CH 5
NSTM 533 – Potable Water Systems
NAVMED P-5010-6 – Water Supply Afloat CC-179: GALLEY & HABITABILITY Understand and review the purpose, operation, maintenance, and safety issues of the ship's galley and habitability systems. Understand sanitation requirements for the galley, messdecks, and barber shop, and safety and cleanliness requirements of berthings and laundry. References include:
OPNAVINST 9640.1A – Shipboard Habitability Program
NAVMED P-5010-1 – Manual of Navy Preventive Medicine
NSTM 655 – Laundry & Dry Cleaning
NAVSUP P486 – Food Service Management of General Mess
NAVSUP P487 – Ship’s Store Operations
OPNAVINST 5100.19 Series – NAVOSH Program Manual for Forces Afloat CC-200: MARINE SANITATION DEVICES Understand the function, maintenance, safety issues and training requirements of Marine Sanitation Devices. References include:
NSTM 593 – Pollution Control
OPNAVINST 5090.1 Series, Environmental Readiness Program
NSTM 074 – Gas Free Engineering
COMFLTFORCOMINST 4790.3 Series - JFMM
NAVSEAINST 9593.1 Series – Marine Sanitation Device Certification
OPNAVINST 5100.19 Series – NAVOSH Program Manual
NSTM S9593-B3-MMC-010 – Marine Sanitation Device USS AVENGER Class
NAVMED P-5010-7 – Sewage Disposal Ashore and Afloat
BUMEDINST 6230.15 Series
15
SOSMRC
COMMON CORE LESSONS & REFERENCES
CC-203: ENVIRONMENTAL PROTECTION Understand the function, operation, and maintenance of your ship’s Environmental Protection systems and equipment. Understand waste processing regulations and equipment and oil pollution abatement. References include:
NSTM 593 – Pollution Control
OPNAVINST 5090.1 Series, Environmental Readiness Program
OPNAV M-5090.1, CH 3, 35 & 36, App. D – Environmental Readiness Program Manual
OPNAVINST 5100.19 Series, CH 10, 19, 35 – NAVOSH Program Manual
OPORD 2000-11, App. L – Environmental Protection Requirements
NAVSEAINST 9593.2 Series – Inspection/Certification Process for OPA Systems
International Convention for the Prevention of Pollution from Ships, Annex I-IV (MARPOL)
Act to Prevent Pollution from Ships (APPS)
Genera Specifications for Overhauls of Surface Ships, 593
PMS MIPs 5931, 5932, 5933 CC-225: ORDNANCE HANDLING & SAFETY Understand ordnance safety basics, Shipboard Explosive Safety Inspections, and assistance provided by Ordnance Handling and Safety Assist Teams. Understand QUAL/CERT, SESI, and OHSAT requirements. References include:
NAVSEA OP 4 – Ammunition and Explosives Safety Afloat
OPNAVINST 5530.13 Series – Physical Security for AA&E
OPNAVINST 8023.24 Series – QUAL/CERT Program
NAVSEA SWO23-AH-WHM-010 – Handling Ammo, Explosives & HAZMAT w/Industrial MHE
NOSSAINST 8023.12 Series – Shipboard Explosive Safety Inspection Program (SESI)
NAVSEA OP 5, Vol I – Ammunition and Explosives Ashore
NAVSEA OP 2173 Series – Approved Handling Equipment for Weapons and Explosives
OPNAVINST 8020.14 Series – DoN Explosives Safety Policy Manual
NAVSEA SW020-AD-SAF-010 – Explosives Safety Accidents and Lessons Learned
NAVSEA SG420-AP-MMA-010 Series – Periodic Testing Arrangements for Ordnance handling
NSTM 700 – Shipboard Ammunition Handling and Stowage CC-226: MAGAZINE PROTECTION SYSTEMS Know the construction, operation, and maintenance issues associated with systems protecting magazine spaces, including sprinklers, alarms, and deluge systems. References include:
NAVSEA OP 4, CH 5-5 – Ammunition and Explosives Safety Afloat
COMFLTFORCOMINST 4790.3 Series, Vol IV, CH 14.2 - JFMM
S9522-AA-HBK-010, CH 3, 4, 5 – Maintenance Manual for Magazine Sprinkling Systems
SW394-AF-SUP-010 – MK 41 Vertical Launching System
WFIP 128D
WFIP 133C CC-227: SMALL ARMS MAINTENANCE Know the maintenance for small arms and Ready Service lockers. References include:
PMS MIPs 7611 and 7631 – Small Arms and Pyrotechnic Lockers
NSTM 700 – Shipboard Ammunition Handling & Stowage
NAVSEA OP 4, CH 3 – Ammunition and Explosives Safety Afloat
16
SOSMRC
COMMON CORE LESSONS & REFERENCES
CC-228: NAVAL GUN SYSTEMS Know the maintenance for Naval Gun Systems, gun barrel maintenance, Mk 15 Close-In Weapons System (CIWS), Mk 31 Mod 1 Rolling Airframe Missile (RAM) System, the MK 45 5-inch Gun, the MK 110 57mm Gun, and the Mk 41 Vertical Launching System (VLS). References include:
NAVSEA OP 3347 – Ordnance Safety Precautions
PMS MIP 7111 Series
NSTM 556 – Hydraulic Equipment
NAVSEAINST 8300.1C – Procedures for Inspection, Reporting, and Re-gunning Barrels
SW300-BB-GTB-010 – Survivability of Naval Gun Barrels
NAVSEA OP 4154, Vol I – Close-In Weapon System
SW261-L1-MNO-030 – MK 31 Mod 1 Rolling Airframe Missile
SW394-AF-MNO-040/VLS – VLS Operation and Maintenance CC-229: COMBAT SYSTEM ALIGNMENT Know the fundamentals of combat system alignment performed by off ship personnel and alignments conducted by shipboard personnel through the planned maintenance system. References include:
SW225-AO-MMA-010 – Combat Systems Theory Alignment
NAVEDTRA 14101 Series, Vol II – Fire-Control Maintenance Concepts
NAVEDTRA 14324 Series – Gunner’s Mate CC-250: 3M/PMS BEST PRACTICES Provides Best Practices and Lessons Learned for a successful 3M program and refreshes PCO’s on PMS requirements. References include:
NAVSEAINST 4790.8 Series, Sec 1, CH 1-3, App. F, G – 3M Manual
COMFLTFORCOMINST 4790.3 Series, Vol VI, CH 19 - JFMM
COMNAVSURFPAC/LANT INST 4790.1 – Surface Force 3M Program
COMNAVSURFPAC/LANT INST 4790.2, CH 1-2 – 3M Certification and Assessment Program
3M Program Assessment and Certification Guidance Checklists
OPNAVINST 4790.4 Series – Ship’s 3M System Policy
SKED 3.2 User’s Guide – Training Lessons and CBTs CC-251: CORROSION CONTROL, PAINT & PRESERVATION Understand the elements of corrosion, mandated corrosion control and prevention programs, and proper preservation. References include:
NSTM 631 – Preservation of Ships in Service
NSTM 633 – Cathodic Protection
NSTM 634, Vol I – Deck Coverings CC-252: CSMP & EIGHT O’CLOCK REPORTS Understand the CSMP and its role in maintaining readiness and the requirements and content of Eight O’Clock Reports. References include:
COMFLTFORCOMINST 4790.3 Series, Vol II, Pt I CH 2-4 and Pt II CH 1-3 - JFMM
COMFLTFORCOMINST 4790.3 Series, Vol VI, CH 19, 33, and 41 - JFMM
NAVSEAINST 4790.8 Series, Sec 1, CH 4 – 3M Manual
OPNAVINST 4790.4 Series – Ship’s 3M System Policy
COMNAVSURFPAC/LANT INST 4790.2, CH 1-2 – 3M Certification and Assessment Program
COMNAVSURFPAC/LANT INST 4790.1 – SURFOR 3M Program
17
SOSMRC
COMMON CORE LESSONS & REFERENCES
CC-253: ELECTRICL SAFETY From the Commanding Officer’s perspective, describe the importance, hazards, necessary precautions, and personnel associated with electrical safety aboard ship. Identify Current Fleet Readiness Issues and Commanding Officer’s concerns associated with electrical safety. References include:
NSTM 300 Rev 9 – Electric Plant General
RMG 291500ZMAY14 – ARC Flash PPE Message
OPNAVINST 5100.19 Series – NAVOSH Program for Forces Afloat
OPNAVINST 3120.32 Series - SORM CC-254: OPERATIONAL SEQUENCING SYSTEMS (SELF STUDY) From the Commanding Officer’s perspective, describe the requirements for administration, maintenance, and use of EOSS and CSOSS. References include:
CSOSS User’s Guide
Combat Systems Technical Operations Manual
COMNAVSURFORINST 3540.3 Series - EDORM
COMNAVSURFPACINST 3540.13 Series – Eng Dept Organization Manual for Non-Nuclear Ships
EOSS User’s Guide
NAVSEAINST 4790.7 Series – Operational Sequencing Systems
OPNAVINST 9200.3 Series – Operational Sequencing Systems
NAVEDTRA 12960 Series – Principles of Naval Engineering CC-255: GAUGE CALIBRATION Understand the basic functions and supporting elements involved in the shipboard metrology and calibration program. References include:
OPNAVINST 3960.16 Series – TMDE, ATS, and METCAL
COMFLTFORCOMINST 4790.3 Series, Vol VI, CH 9 - JFMM
NAVSEAINST 4734.1B Metrology and Calibration (METCAL) Programs
ST700-AM-GYD-010, CH 2, App. D, and Encl. 1 – METCAL Lab Requirements and Certification
NSTM 504 – Pressure, Temperature, and other Mechanical Electromechanical Measuring Instruments
RMG 151503ZAUG13 – WFIP 103H – Shipboard Gauge Cal Guidance CC-257: Engineering Legal Records and Operating Logs (SELF STUDY) Understand the administration and maintenance of the Engineering Department’s legal records and logs. References include:
Navy Regulations Articles 0845 and 0846
OPNAVINST 3120.32 Series, Sec. 423-424 - SORM
COMNAVSURFORINST 3540.3 Series, App. E - EDORM
NSTM 090 – Inspections, Tests, Records, and Reports
NSTM 079, Vol III – Damage Control, Engineering Casualty Control
NSTM 220, Vol II – Boiler Water/Feed Water – Test and Treatment
NSTM 633 – Cathodic Protection
OPNAVINST 90941.1 Series – Full Power and Economy Trial Requirements for Non-Nuclear Ships
SECNAVINST 5210.5 Series – DoN Records Management Program
18
SOSMRC
COMMON CORE LESSONS & REFERENCES
CC-258: Fuel Oil Quality Management Understand the requirements for administration and maintenance of the Shipboard Fuel Oil Quality Management program. References include:
COMNAVSURFORINST 3540.3 Series - EDORM
NSTM 541, Sec 1.5, 1.8, 2.1, 2.4, 4, 5, and 10 – Ship Fuel and Fuel Systems
NSTM 542, Sec 2.3, 2.6, 4, 7 – Gasoline and JP-5 Fuel Systems
EOSS – SNOK, FOCL, and SRFO
Fuel Oil Quality Management Program ASA Checksheets
OPNAVINST 5090.1C – Environmental and Natural Resource Program
RMG 311606ZMAR09 – SURFOR Oil Spill Prevention and Response Guidance
RMG 192300ZOCT12 – CNSP Oil Spill Prevention
COMNAVSEASYSCOM 221707ZAPR13 – F-76 Fleet Advisory
RMG 101707ZJAN14 – CNSP F-76 Microbial Growth CC-259: LUBE OIL QUALITY MANAGEMENT Understand the requirements of the Lube Oil Quality Management program as they pertain to each respective ship class and equipment type. References include:
COMNAVSURFORINST 3540.3 Series – EDORM
COMFLTFORCOMINST 4790.3 - JFMM
NSTM 262, Sec 1, 2.1.2, 3.6.4, 3.6.5, 3.7, 4, 5, App D – Lubricating Oils, Greases, Specialty Lubricants, and Lubrication Systems
NSTM 233, Sec 8 – Diesel Engines
NSTM 241, Sec 3.2 – Propulsion Reduction Gears, Couplings, Clutches and Associated Components
NSTM 244, Sec 1.7.8, 2.4.2, 2.5.2, 2.6.3, 3.6 – Propulsion Bearings and Seals
NSTM 245, Sec 5.5.2 – Propellers
NSTM 556, Sec 8.3–8.5 – Hydraulic Equipment (Power Transmission and Control
PMS MIPs 2000, 2331, 3112, 2451
ATG Lube Oil Quality Management ASA Checksheet CC-260: PB4M Understand how to establish, maintain, and execute quality maintenance for your ship utilizing the PB4M process. References include:
COMFLTFORCOMINST 4790.3 Series, Vol II, Pt 2 CH 1, 3, 4 - JFMM
COMFLTFORCOMINST 4790.3 Series, Vol VI, CH 33 (MMBP), and 41 (Maintenance Team) - JFMM
COMNAVSURFPAC/LANT INST 4790.2, CH 1 – 3M Certification and Assessment Program
COMNAVSURFPAC/LANT INST 4790.1 – SURFOR 3M Program CC-262: QUALITY MAINTENANCE From the Commanding Officer's perspective, understand the requirements for administration and maintenance of the ship’s training, administration, management, and inspection programs that support the Quality Maintenance Program. References include:
COMFLTFORCOMINST 4790.3 Series
www.submepp.navy.mil/jfmm
19
SOSMRC
COMMON CORE LESSONS & REFERENCES
CC-263: TAG-OUT REFRESHER AND ESOMS (SELF STUDY) Understand the Tag-Out program, administration, and responsibilities, and the Electronic Shift Operations Management System (e-SOMS). Identify current fleet readiness issues and Commanding Officer’s concerns. References include:
COMNAVSURFORINST 3540.3 Series – EDORM
COMFLTFORCOMINST 4790.3 Series - JFMM
OPNAVINST 5100.19 Series – NAVOSH Program Manual for Forces Afloat
ESOMS and EOSS
NAVSEA S0400-AD-URM-010/TUM REV 7 – Tag-Out User’s Manual
COMNAVSURFORINST 3120.1 Series – Zone Inspections CC-264: ZONE INSPECTIONS (SELF STUDY) Identify the responsibilities in preparing for and conducting an effective Zone Inspection Program. Tie together all of the material knowledge you have learned, refined, or reviewed and how to apply it to make your ship better and crew more effective. References include:
US Navy Regulations, CH 8, Para 0808
COMNAVSURFORINST 3120.1 Series – Zone Inspections
COMNAVSEASYSCOMINST 4790.8C – 3M Manual
COMNAVSURFPAC/LANT INST 4790.1 – SURFOR 3M Program
COMFLTFORCOMINST 4790.3 - JFMM
OPNAVINST 3120.32 - SORM
RMG 052046ZAUG08 – CNSF Zone Inspection Message
RMG 192315ZFEB2015 – CNSF Warfighting Serial TWO: Zone Inspections
OPNAVINST 5100.19 Series – NAVOSH Program Manual for Forces Afloat
INSURV Handbook, Edition 7.0 CC-265: INTEGRATED CONDITION ASSESSMENT SYSTEM Understand the operation, use and applicable Type Commander directives regarding the Integrated Condition Assessment System (ICAS). CC-270: NAVOSH PROGRAMS (SELF STUDY) Understand both command and programmatic roles and responsibilities for critical NAVOSH programs. References include:
OPNAVINST 5100.19 Series – NAVOSH Program Manual for Forces Afloat
DODINST 6055.12 Series – DOD Hearing Conservation Program
OPNAVINST 5102.1 Series – Safety Investigation Reporting and Record Keeping Manual
NSTM 077 – Personal Protection Equipment
NSTM 600, Vol 3 – Hull Outfitting Equipment
Naval Safety Center Website – www.safetycenter.navy.mil CC-272: RESTRICTED MANUEVERING DOCTRINE ORDER and MANAGE a propulsion plant-specific Restricted Maneuvering Doctrine (RMD) to the watch stander level for your prospective ship class using documented procedures and applicable safety precautions in accordance with CNSFINST 3540.3 (series) Engineering Department Organization and Regulations Manual. References include:
COMNAVSURFORINST 3540.3 Series, CH 4 - EDORM
EOSS User’s Guide (EUG)
Warfighting Serial THIRTEEN
20
SOSMRC
COMMON CORE LESSONS & REFERENCES
CC-280: MECHANICAL FUNDAMENTALS (SELF STUDY) Students will review readings and references covering basic engineering mechanical fundamentals, including piping, valves, fittings, flex hoses, heat exchangers, pumps, and hydraulic systems. References include:
NSTM 254, Sec 1, 3, 4 – Condensers, Heat Exchangers, and Air Ejectors
NSTM 503, Sec 2, 3, 4, 5 – Pumps
NSTM 556, Sec 5 – Hydraulic Equipment
NAVEDTRA 14105, Sec 1, 2, 3 – Fluid Power
NAVEDTRA 14151 Series, CH 5, 6, 10 – Machinist’s Mate 3 & 2 (Surface)
General Specifications for Overhaul of Surface Ships – 075, 503, 508, 556, 558
NAVSEA S0400-AD-URM-010/TUM – Tag-Out User’s Manual
EOSS
PMS MIP 5000, 5241, 5292, 5561
NSTM 505, Sec. 1, 7, 9 – Piping Systems
NSTM 075 Sec. 1, 8 - Fasteners
COMFLTFORCOMINST 4790.3 Series, Vol V, Pt 1, CH 5 – In-Process Control
PMS 5000 Series
CC-281: ELECTRICAL FUNDAMENTALS (SELF STUDY) Students will review readings and references covering basic engineering electrical fundamentals including the theory, components and operation of 60 and 400 Hz systems, electrical motors and motor controllers. References include:
NSTM 300 – Electric Plant-General
NSTM 302 – Electric Motors and Controllers
NSTM 310 – Electric Power Generators and Conversion Equipment
NSTM 320 – Electric Power Distribution Systems CC-286: SHIPBOARD COOLING & HEATING Understand the fundamentals of the air conditioning and refrigeration cycle and associated systems such as chilled water, electronic cooling, and ventilation to support combat systems, general ship auxiliary services, and crew comfort. Understand issues maintaining and the associated hazards of operating and repairing shipboard cooling systems. References include:
NSTM 510 – Heating Ventilating, and Air Conditioning Systms for Surface Ships
NSTM 516 – Refrigeration Systems
NSTM 532 – Liquid Cooling Systems for Electronic Equipment
OPNAVINST 5090.1 Series – Environmental and Natural Resources Program Manual CC-287: SHIPBOARD AIR SYSTEMS Understand the function, theory of operation, location, operating parameters, design characteristics and maintenance requirements of Shipboard Compressed Air Systems. Understand how Electronics Dry Air is produced and why it is used to support certain Combat Systems. References include:
NSTM 551 – Compressed Air Plants and Systems
NAVSEA S9550-BZ-MMA-010 – RIX Model 5R5-75A Oil-Free HPAC
21
SOSMRC
COMMON CORE LESSONS & REFERENCES
CC-581: PXO DCTT Seminar From the Commanding Officer and/or Executive Officer’s perspective, discuss the goals, makeup, responsibilities, and administrative and performance requirements of the ship’s Damage Control Training Team (DCTT). References include:
CNSP/CNSLINST 3502.3 - SFRM
CNSP/CNSLINST 3500.10 – READ-E Instruction
CNSP/CNSLINST 3500.11 – SURFOR Exercise Manual
CNSP/CNSLINST 3504.1 – Redlines Implementing Instruction
CNSPINST 3502.2 – Littoral Combat Ship Training Manual
ATGLANT/PAC Users Guide, Annex O – Damage Control (MOB-D)
NTTP 3-20.31 – Surface Ship Reliability
CNSF 3541.1 Series – Repair Party Manual
NSTM 070 – Nuclear Defense at Sea
NSTM 074, Vol 3 – Gas Free Engineering
NSTM 077 – Personal Protective Equipment
NSTM 079, Vol 2 – Practical Damage Control
NSTM 470 – BW/CW Defense and Countermeasures
NSTM 555, Vol 1 – Surface Ship Firefighting
NSTM 600 – Watertight Enclosures
COMNAVSURFORINST 3540.3 Series, CH 4 – EDORM
ATGPACINST 3502.5 – Shipboard Training Team Standards
22
SOSMRC LCS-1 Variant Specific Lessons
MACHINERY PLANT CONTROL AND MONITORING SYSTEM (MPCMS) Describe the major components, function, and operational fundamentals of the MPCMS Human Machine interface (HMI) to include consoles, functional modes, and related equipment. References include:
SIB S9LCS-AA-SIB-020/LCS-1 Freedom
0910-LP-104-5043 – LCS MPCMS Systems Manual
S9410-A2-SSM-010 – MPCMS Control Consoles
MMC-202-01-00001C – MPCMS NAVLAN Servers
S9410-A2-SS-040 – MPCMS-PLC Enclosures for LCS
S9LCS-AA-POG-010 – Propulsion Operating Guide
SE010-CL-MMC-010 – Uninterruptible Power Supply MT-30 GAS TURBINE ENGINE Describe the principles, function, components, control and monitoring systems, and operation of a MT-30gas turbine propulsion plant and associated auxiliary support systems. References include:
S9234-DV-MMC-010 – Compressor Wash-down System
EOSS
NSTM 234 – Marine Gas Turbines
MT-30 General Familiarization
SIB S9LCS-AA-SIB-010 and 020 – Ship’s Information Book for LCS-1 MAIN PROPULSION DIESEL ENGINES Describe the major components, function, and operation of the Main Propulsion Diesel Engine. References include:
NSTM 233 – Diesel Engines
SIB S9LCS-AA-SIB-010 and 020 (Part 1) – Ship’s Information Book for LCS-1
S9233-DT-MMC-010/LCS – Main Propulsion Diesel Engine for Littoral Combat Ships
S9LCS-AA-POG-010 – Propulsion Operating Guide LAUNCH, RECOVERY, HANDLING, AND STOWAGE (LRHS) SYSTEM Describe the major components, function, and operation of the LRHS System, Zone and Package Configurations, and the Offboard Organic vehicle (OOV). References include:
SG825-BA-MMC-010 – AMZ and RC1 Payload Handling Chain Hoists
S9583-CA-MMC-010 – LCS-1 Class Boat Handling and Storage Manual
S9169-A6-MMC-010 – LCS-1 Hangar Door Technical Manual
SIB S9LCS-AA-SIB-010 – Ship’s Information Book for LCS-1
S9169-AX-MMC-010 - LRHS Hydraulic Control System
Crane-XX-MMC-010 – LRHS Overhead Crane
S9169-A3-MMC-010 – LRHS System, Stern Door
S969-A5-MMC-010 – LRHS System, Side Launch Door
0403-1-202-012 (App D, Group 4) – MPCMC Control Concept
Oldenburg LRHS crane PDR PPT Presentation
S9584-A4-SSM-010 – OOV Handling Support Services
S9583-CL-MMC-010 – Tow Winch
23
SOSMRC LCS-1 Variant Specific Lessons
SHAFTING, CLUTCHES, AND BRAKES Describe the major components, function, and operation of the Main Propulsion Shafting. References include:
S9243-B7-MMC-010 – Propulsion Shafting System
NSTM 243 – Propulsion Shafting
NSTM 241 – Propulsion Reduction Gears, Couplings, and Clutches
SIB S9LCS-AA-SIB-010 and 020 – Ship’s Information Book for LCS-1 REDUCTION/COMBINING/SPLITTER GEARS AND LUBE OIL SCAVENGING SYSTEM (LOSS) Describe the major components, function, and operation of the Reduction/Combining/Splitter gears and the LOSS including aligning, starting, and stopping. References include:
LCS MAAG Reduction gear control System
MMC-241-01-01TRS – LCS Reduction Gear, Combining
MMC-241-01-02TRS – LCS Reduction Gear, Splitting
NSTM 262 – Lubricating Oils and Greases
S9241-C7MMC-010 – MAAG Reduction Gear Vol 1 WATER JETS AND STEERING Describe the major components, function, and local and remote operation of the Water Jets and steering system, operating limits, and Water Jet Power Rafting. References include:
EOSS
S9410-A2-SSM-010 – Machinery Plant Control and Monitoring System (MPCMS)
S9243-B7-MMC-010 – Propulsion Shafting System
SIB S9LCS-AA-SIB-010 and 020 – Ship’s Information Book for LCS-1 ELECTRICAL POWER DISTRIBUTION AND SWITCHBOARDS Describe the major components, function, and operation of the ship’s Electrical Distribution System including 60 and 400 HZ systems. Describe switchboards, ABT/MBTs, steps for transferring between ship and shore power, and paralleling SSDGs. References include:
0403-1-202-012 – MPCMC Control Concept
MMC-202-01-00001A - MPCMS
SIB S9LCS-AW-SIB-010 – Hull, Mechanical, and Electrical Systems
MMC-324-01-00001 – LCS Switchboards
DRS Document No. 9505177 – Operation and Maintenance Manual Load Centers
S9LCS-AA-POG-010 – Propulsion Operating Guide
MMC-324-02-00001A – Circuit Breakers, Navy Type
MMC-324-02-00001 – LCS Load centers
SIB S9LCS-AW-SIB-050 – Power and Lighting Systems (Vol 3, part 2) SHIP SERVICE DIESEL GENERATOR (SSDG) Describe the major components, function, and operation of the SSDG. References include:
S9LCS-AA-POG-010/020 – Propulsion Operating Guide
SIB S9LCS-AA-SIB-020/LCS-1 Freedom
S9233-DS-MMC-010 – Operation and Maintenance Manual, Isotta Fraschini (IFM) Marine Engine
S9314-D6-MMC-010 – Hitzinger LCS Generator Model SGS 7C 04T, Operation and Maintenance Manual
24
SOSMRC LCS-1 Variant Specific Lessons
GENERATOR SET Describe the major components, function, and operation of the Kato Diesel Generator Set. References include:
Information Sheet 3-1-21-S – Diesel Generator Sets
Information Sheet 2-7-1IS – MTU-396 Diesel Engine
SIB S9LCS-AB-SIB-020/LCS 2, Vol 3, Part 1 & 2 FUEL OIL SERVICE SYSTEM Describe the major components, function, and operation of the Fuel Oil Service System. References include:
MMC-261-01-E0006 – Aircraft Appliance and Equipment Gas Turbine Fuel Service Filter/Separator
MMC-541-01-0001 – Blackmer Fuel Oil Transfer Pump Technical Manual
S6226-SX-MMC-010 – Diesel Fuel Oil Service Pump (CDRL 11826)
EOSS
S6226-SY-MMC-010 – Fuel Oil Transfer Pump
S9261-BH-MMC-010 – Gas Turbine Fuel Oil Return Cooler
S9261-BJ-MMC-010 – GT Fuel Oil Service Pre-filter, Aircraft Appliance and Equipment Model 74048D-1
NSTM 541 – Ship Fuel and Fuel System
S6226-SX-MMC-010 – Propulsion Diesel Oil Service Booster
SIB S9LCS-AA-SIB-010 and 020 – Ship’s Information Book for LCS-1 LUBE OIL FILL AND TRANSFER SYSTEM Describe the major components, function, and operation of the Lube Oil Fill and Transfer Systems. References include:
EOSS
S9202-BC-MMO-010 – Centralized Machinery Control System
SIB S9LCS-AA-SIB-010 and 020 – Ship’s Information Book for LCS-1 POWER MANAGEMENT Understand the functioning and priority settings for equipment with respect to power management, starting and shedding load, and ground isolation. References include:
MMC-202-01-00001A - MPCMS
0403-1-202-012 – MPCMC Control Concept
S9560-CZ-MMO-010 – Engineering Control System Manual
S9LCS-AA-POG-010/020 – Propulsion Operating Guide
NSTM 300 Sea Water Service System EXPLAIN the major components, function, and operation of the Sea Water Cooling System. References include:
SIB S9LCS-AA-SIB-010 and 020 – Ship’s Information Book for LCS-1
S6226-SV-MMC-010 – Main Sea Water Pump
25
SOSMRC LCS-1 Variant Specific Lessons
MAIN AND SECONDARY DRAINAGE DESCRIBE the major components, function, and operation of Main and Secondary Drainage Systems. References include:
S9LCS-AA-POG-010 – Propulsion Operating Guide
SIB S9LCS-AA-SIB-010 and 020 – Ship’s Information Book for LCS-1
S9202-BC-MMO-010 – Centralized Machinery Control System Manual FIREMAIN SYSTEM Describe the major components, function, and operation of the Firemain system. References include:
S9202-BC-MMO-010 – Centralized Machinery Control System Manual
EOSS
S6226-W6-MMC-010 – Fire Pump
SIB S9LCS-AA-SIB-010 and 020 – Ship’s Information Book for LCS-1 WATER MIST SYSTEM Describe the major components, function, and operation of the Water Mist System, including monitoring and securing the system. References include:
S9LCS-AA-POG-010 – Propulsion Operating Guide
SIB S9LCS-AA-SIB-010 and 020 – Ship’s Information Book for LCS-1
S9202-BC-MMO-010 – Centralized Machinery Control System Manual
S9560-CZ-MMO-010 – Engineering Control System
MMC-555-07-E0002 – Water Mist Fire Extinguishing System
S6226-XA-MMC-010 – Water Mist Transfer Pump HEPTAFLOUROPROPANE (HFP) AND CARBIN DIOXIDE (CO2) SYSTEMs Describe the major components, function, and operation of the HFP and CO2 Systems including modes of operation and spaces covered. References include:
SIB S9LCS-AA-SIB-010 and 020 – Ship’s Information Book for LCS-1
S9555-DT-MMC-010 – ANSUL, HFP Fire Extinguishing System, Description, Operation and Maintenance Manual MEDIUM PRESSURE AIR SYSTEM (MPAC) Describe the major components, function, and operation of the MPAC System. References include:
SIB S9LCS-AA-SIB-010 and 020 – Ship’s Information Book for LCS-1
S9086-SY-STM-010 – Compressed Air Plants and Systems
S6220-ER-MMC-010 – Compressor, medium Pressure, Air 3-Stage, Air Cooled: Model WP-121L
EOSS JP-5 FUEL OIL SYSTEM AND AVIATION SUPPORT Describe the major components, function, and operation of the JP-5 Fuel Oil System. References include:
S9261-BN-MMC-010 – Fuel Oil Purifier
MMC-542-01-E0002 – Blackmer JP-5 Service Pump
NSTM 542, Gasoline and JP-5 Fuel Systems
EOSS
26
SOSMRC LCS-1 Variant Specific Lessons
400 HZ ELECTRICAL DISTRIBUTION DESCRIBE the major components, function, and operation of the 400 HZ Electrical Distribution System. References include:
MMC-202-01-00001A - MPCMS
SIB S9LCS-AW-SIB-010 – Hull, Mechanical, and Electrical Systems
MMC-324-01-00001 – LCS Switchboards
NAVEDTRA 14344 – Electrician’s Mate Manual
S9314-E6-MMC – Frequency Converters, Air Cooled, Solid State RIDE CONTROL SYSTEM Describe the major components, function, and operation of the Ride Control System (RCS). References include:
EOSS
S9560-EA-MMC-010 – Interceptors
S9565-AK-MMC-010 – Sliding Stabilizers
Ride Control Engineering Manual – Chapter 2.11
27
Maritime Warfighting (MW) MODULE OVERVIEW The Maritime Warfare section is focused on refreshing basic warfighting principles that the student has developed over the course of their career as well as preparing students to apply these principles as a Commanding Officer. Maritime Warfare utilizes a combination of instructor led training, student self-study, guest lectures, and simulator scenarios. MARITIME WARFARE SKILLS/KNOWLEDGE ASSESSMENT During MW, students are will be required to pass several exams/assessments and produce various products. These include:
Maritime Warfare pre-test– Ungraded
Maritime Warfare Quizzes– 70% Required per quiz – 75% overall
PPOT Scenario – Pass/Fail
Strait of Hormuz Scenario – Pass/Fail
COAT FMB Scenario – Assess and receive feedback on preparation and execution GUEST LECTURES The following lectures will be delivered during MW:
SSK Threat Brief – Delivered by a Post Command SSK CO (AUS)
LOAC/SROE – Delivered by Naval Justice School instructors
SSN CO – Guest lecture from a post-command SSN CO
EKMS – How to effectively manage the ship’s EKMS program. Provided by CMS COR Audit Team.
C7F/C5F AOR update and OPLAN reviews – provided by NWC HALSEY ALPHA and BRAVO
NAVIOFOR
28
Maritime Warfare MW-1: TRAINING TOOLS Understand and use tools available to Commanders to maintain and improve shipboard training, including the ATG Toolbox and Extranet TORIS, and FLTMPS. References include:
ATG, Training and Operational Readiness Information Service (TORIS) User’s Guide, v3.2.2.4
CNSP/CNSLINST 3502.3A, Surface Force Readiness Manual
CNSP/CNSLINST 3500.11A – Surface Force Exercise Manual
FLTMPS Navigation Tutorial and FLTMPS Website
MW-6: CRUISE MISSILE TACTICAL QUAL (CMTQ) Demonstrate an understanding of Weapons certifications on ships and be able to list and describe the current standards and requirements for CMTQ. References include:
CNSFINST 8820.1B – Cruise Missile Qualification/Certification Program
CNSF Message DTG 022223ZMAY16 – LCS CMTQ Interim Guidance
CNSFINST 4790.1 Series – Surface Force Maintenance and Material Management (3M) Assessment and Certification Program
COMFLTFORCOMINST 47903.3 Series – JFMM
CNSP/CNSLINST 3500.10 – READ-E Instruction
CNSP/CNSLINST 300.11A – SFEM
CNSP/CNSLINST 3502.3A – SFRM
CNSP/CNSLINST 3502.5 – Mission Area Watch Team Continuity Requirements
MW-7: LIVE FIRE SEMINAR (SULLIVANS CASE STUDY) Describe how to plan for the safe and successful conduct of a live fire event including requirements and pitfalls. References include:
NTTP 3-02.2 – Supporting Arms Coordination in Amphibious Operations
CNSP/CNSLINST 300.11A – SFEM
CNSP/CNSLINST 3502.3A – SFRM
ATGLANT/ATGPAC User’s Guide
ATP-4E – Allied Naval Gunfire Support
FXP-5 (Revision B) MW-9: SUW REVIEW Explain at an advanced level the SUW battlespace and battlespace management, SUW sensor, RMP, SUW weapons and attack options including OTH-T, FAC/FIAC defense operations, and MIO. References include:
NTTP 3-20.1 – Surface Warfare Commander’s Manual
Distributed Lethality – From AWJ, Vol 1, Issue 2, Fall 2015
CDS-15 CONOPS 3-20.1-01 – Offensive SAG CONOPS in an Anti-Access Area Denial Envelope
NWP 3-20 – Navy Surface Warfare Manual
NTTP 3-20.3 – Surface Ship SUW Tactics
ATP 1(F), Vol I – Allied Maritime Tactical Instruction and Procedures
Navy-Wide OPTASK SUW
Navy-Wide OPTASK CMP
TACMEMO 3-32.1-10 – Maritime Domain Awareness
TACMEMO 3-51.1-14 – JTT Employment for Naval Surface Units
NTTP 2-02.1 – Strike Group and Unit Level Cryptological Operations
NTTP 3-13.14 – Surface EW Guide
NTRP 3-22.2 – MH-60R NATIP, MH-60R Seawolf Manual
NTTP 3-22.1 – P-3C
29
Maritime Warfare MW-9: SUW (continued)
NTRP 3-22.2 – P-8
NTRP 3-20.6.08 – DDG Class Tactical Manuals
NWP 3-20.32 – Surface Ship Gunnery
LCS Class Tactical Manual
LPD Class Tactical Manual
NAVSEA Caps and Lims for LCS
TACMEMO 3-20.32
NTTP 3-20.5 – Counter FAC/FIAC Procedures
TACMEMO 3-20.1-12 – CIWS MK 15 Mods 21-28
NTTP 3-20.71 – Surface Harpoon Employment Manual
TACMEMO 3-20.2-16 – Prompt Sea Strike
NTTP 3-20.7 – Over the Horizon Targeting and Surveillance
TACMEMO 3-2-.17 – Surface Action Group Offensive Operations
Navy-Wide OPTASK VBSS
NTTP 3-07.11M – VBSS
RMG 081630ZFEB17 – USFF Revised VBSS CONEMP Message
MW-12: ASW TACTICS SEMINAR Describe an ASW DTE Scenario and current US weapons, evasions, and counter-measures available. References include:
Navy-Wide OPTASK ASW
ATP-28(C) - Allied ASW Warfare Manual
NWP 3-21 - Fleet ASW
ATP-1(F) Vol 1 – Allied Maritime Tactical Instructions and Procedures
NTTP 3-21.1 – ASW Commander’s Manual
NWP 3-21.0 (Rev A) – Coordinated Submarine Task Group Operations Manual
NWP 3-56 – CWC Doctrine
NTTP 3-58.2 – navy Military Deception
MK 54 Mod 0 Torpedo General Information Book
NTTP 3-21.33 – Surface Torpedo Attack Tactics, Countermeasures, and Evasion Manual
APP-7 – Joint Brevity Words Publication MW-13: MINE WARFARE FUNDAMENTALS Understand Mine Warfare fundamentals and capabilities, mine classifications, countermeasures, and advantages and disadvantages of minesweeping and mine hunting. References include:
NWP 3-15, Vol I & II – Naval Mine Warfare (Unclassified)
NWP 3-15.41 – MCM Planning and Procedures
NTTP 3-15.21 – Surface Mine Countermeasures Operations
NTRP 3-20.6.19 – MCM-1 Class Tactical Manual
DDG/LSD/CG Class Tactical Manuals
Navy-Wide OPTASK MIW
CTF 52 OPORD 08-11
Presidential Memo to SECDEF of 28 Jan 2012
30
Maritime Warfare MW-14: AMPHIB OVERVIEW Understand Amphibious assets and their caps/lims, amphibious operations and roles. References include:
Joint Pub 3-02 – Joint Doctrine for Amphibious Operations (18 July 2014)
Commander’s Quick Reference Amphibious Warfare Handbook (October 2016)
Marine Corps Reference Pub 1-10.1 – Organization of the USMC
ESG 2, 3 & 7 Websites – www.esg2.navy.mil, www.public.navy.mil/surfor/ESG3, www.public.navy.mil/surfor/ESG7
MSTPD Pamphlet 5-0.3 – MAGTF Planner’s Reference Manual
NTRP 3-20.6.13 – LHD-1 Class Tactical Manual
NTRP 3-20-6.17 – LSD-41 Class Tactical Manual
NTRP 3-20.6.21 – LPD-17 Class Tactical Manual
MCRP 3-31B – Amphibious Ships and Landing Craft Data Book
NTTP 3-02.14 – Naval Beach Group Operations
NTTP 3-02.1M/MCTP 13-10E – Ship-to-Shore Movement
MW-16: AMPHIB BREAKOUT Plan Amphibious Operations considering mission parameters, operational area geography and available assets. Describe wet-well operations, launch and recovery procedures, ballasting, and stern-gate marriages. References include:
Joint Pub 3-02 – Joint Doctrine for Amphibious Operations (18 July 2014)
CNSL/CNSPINST 3340.3D – Wet Well Operations Manual
SEAOPS Vol III – LCAC Well Deck Operations
NWP 3-02.12 – Employment of LCAC
NTTP 3-02.1 – Ship-to-Shore Movement
CNSP/CNSLINST 3840.1B – Joint Surf Manual
NSTM CH 584 – Landing Craft and AAV Handling, Stowage, and Support MW-18: INTEGRATED/ADVANCED PHASE REVIEW Understand the keys to achieving deployment certification as an element to FTRP including understating required classroom events, underway exercises, and Fleet Synthetic and Distributed Training events. References include:
CFFC/CPFINST 3500.3 Series - Fleet Synthetic Training Program
CFFC/CPFINST 3000.15A – Optimized Fleet Response Plan
CNSP/CNSLINST 3502.3 - SFRM
CPF/USFFINST 3501.3D – Fleet Training Continuum Instruction
CFFC OPORD 2000-11 Ch 2, Annex T, App 5 – CSG/ARG FRTP Training Events
C3FINST 3501.1 – Integrated and Advanced Fleet Training Instruction
C7FINST 35.1.1B – Seventh Fleet Training Program
CTF 70 BF7F CONOPS for FDNF-J Readiness
31
Maritime Warfare MW-20: AMD OPERATIONS Understand updated US and threat country caps/lims, CDAG and its employment in C5F, and AMD tactics and operations. References include:
Navy-Wide OPTASK AMD
NTTP 3-01.11 – Maritime Air and Missile Defense Planning
NTTP 3-01.12 – Maritime Air and Missile Defense Employment
Combined air Operations Plan (COAP) for the Defense of the Arabian Gulf (CDAG)
TB EW-01-2016 – Modified Distraction Tactics
TOP GUN Manual
TM 3-01.9-16 – Surface Weapons Systems Employment to CUAS and LSF
MW-23: BALLISTIC MISSILE DEFENSE SEMINAR Understand BMD qualification process including manning and watch team requirements, the BMDEX training plan, and the BMDRA. References include:
CNSP/CNSLINST 8820.2D
CNSL/CNSPINST 3502.3 - SFRM
COMTHIRDFLT MSG 210200ZMAY2010 MW-25: NEO/DSCA AND FOREIGN HUMANITARIAN ASSISTANCE With respect to NEO, understand the key players and relationships, NEO environments, Department of State tools, and embassy staff duties. Distinguish between Defense Support of Civil authorities (DSCA) and Foreign Humanitarian Assistance (FHA), challenges encountered, and request process for support following a disaster. References include:
Joint Pub 3-68
A Cooperative Strategy for 21st Century Seapower
Joint Pub 3-29 – Foreign Humanitarian Assistance
Joint Pub 3-28 – Defense Support of Civil Authorities
NWP 3-29 – Disaster Relief Operations
NTTP 3-57.3 – Navy Humanitarian and Civil Assistance Operations MW-26: COUNTER ISR&T Describe likely Intelligence, Surveillance, Reconnaissance and Targeting threats, and understand EMCON and MILDEC requirements and procedures. Describe cryptologic capabilities of Navy ships, Communications Electronic Attack, and ROE in regards to jamming. References include:
TM 3-21.10-11 – Counter ISR/Denial and Deception
TM 3-51.1-13 – Fleet EMCON Operations
Neptune Scissors Executive Summary 2010/2011
NTTP 3-51.3 – Communications Electronic Attack
NTTP 3-51.3.2 – SSES INC E Tactical Employment Guide
Navy-Wide OPTASK EO and OPTASK Cryptology MW-34: VISUAL INFORMATION REQUIREMENTS Understand Visual Information requirements and best practices for building effective storyboards. References include:
Navy-Wide OPTASK Visual Information
USCENTCOM FRAGO 15-204 – Requirements and Procedures for Reporting, Capture, and Release of Visual and Audio Media in Support of CENTCOM Theater Campaign Plans – CUSNC 141915Z NOV 12
C5F OPTASK VIR – 061452Z JAN 14
C5F N2 INCHOP VI Requirements
COMPACFLT 240438Z FEB 17
32
Maritime Warfare MW-37: DEPLOYMENT PLANNING AND TACTICAL PREPARATION Discuss best practices for transitioning from training and work-ups to deployment. Understand challenges the ship will face and the role of the XO in addressing these challenges. Discuss best practices for returning to homeport from deployment and how to address crew transition challenges. MW-39: FUNDAMENTALS OF SEA CONTROL Understand the differences between Naval Supremacy, Maritime Supremacy Command of the Sea, and Sea Control. Describe the role of different domains in Sea Control, the objectives of Naval Warfare, and the differences between Sea Control and Sea Denial. References include:
DoD Directive 2005.02E – Maritime Domain Awareness in the DoD
National Maritime Domain Awareness Plan for the National Strategy for maritime Security – Dec 2013
USN Maritime Domain Awareness Concept – May 2007
JP 3-0 – Joint Operations
JP 3-09 – Joint Fire Support
Cooperative Strategy for 21st Century Seapower
Maritime Headquarters with Maritime Operations Centers: An Enabling Concept for Maritime Command and Control – NAVSUP
Naval Strategy and operations in Narrow Seas – Milan Vego
Operational Warfare at Sea – Milan Vego
Maritime Strategy and Sea Control – Milan Vego
Surface Force Strategy: Return to Sea Control – CNSF, 2017
NWP 5-01 – Navy Planning
MW-41: BALLISTIC MISSILE DEFENSE OVERVIEW Understand and apply BMD battlespace threats, C2 procedures, and current caps/lims and threats. References include:
Navy-Wide OPTASK BMD Homeland Defense
Navy-Wide OPTASK BMD Regional Defense Pt I and II
BF7F Regional Ballistic Missile Defense (BMD) OPTASK SUPP
TM 3-01.3-09 – AEGIS BMD Baseline 3.6.1 Core Tactics, Change 1
TM 3-01.1-13 – AEGIS BMD Baseline 4.X Core Tactics
TM 3-01.1-12 – AEGIS BMD Operational Employment Guide
NSWC PHD BMD Home Page – http://bmd.phdnswc.navy.smil.mil/
AEGIS Combat Systems Capabilities and Limitations
CJCS Joint BMD Planning CONOPS
33
Command Management (CM) MODULE OVERVIEW The Command Management modules prepares students for managing required programs, executing administrative requirements, and managing relationships to set the ship up for success in all phases of operation. During this module, discussions on leadership, planning, risk evaluation, training, and management best practices will explore your role in setting the conditions for an organizational culture that effectively sets the conditions for a combat ready command through positive moral, effective training, in depth proficiency, functional risk evaluation and mitigation, and active safety programs. Command Management utilizes a combination of instructor led training, student self-study, guest lectures, and simulator scenarios. GUEST LECTURES The following lectures will be delivered during CM:
Supply – Guest lectures are presented by the TYCOM N41 covering Disbursing, Food Service, Retail, Ordnance, Husbanding Service Providers, and required inspections and certifications.
Sexual Assault and Prevention – Presented by the Naval Station SAPR, examines SAPR roles and responsibilities of the Triad.
ADAMS for Leaders – This is a stand-alone course embedded with SCC to prepare the CO/XO for managing Drug and Alcohol Programs on ships
TACTICAL VIGNETTES – Lead by the NWC JMO Dept. These lessons examine combat leadership utilizing case studies.
o Falklands historical o USS England ASW in WWII o Guadalcanal
PERS-41 community brief, placement brief, PERS-4013 enlisted detailing brief (via VTC), and PERS-41 FITREP seminar – presented by PERS-41 detailers
Environmental Law – Legal requirements unique to the Commanding Officer with regard to protecting the environment. Provided by Naval Justice School
SWOS CO/CMC Mentoring Sessions
LPD Class Advocate/NAVSEA
34
Command Management (CM) CM-1: XO INTRODUCTION Understand the duties, responsibilities, and authorities of the XO and the functional chain of command. Discuss the XO’s daily routine, the XO’s role in program administration and management, messing and berthing responsibilities, and the XO’s role in major shipboard evolutions. References include:
US Navy Regulations, 1990
OPNAVINST 3120.32 Series – SORM CM-2: SURFACE FORCE READINESS MANUAL Demonstrate a knowledge of policy and guidance contained in the Surface Force Readiness Manual (SFRM) including the FRTP Training Continuum, training phases and requirements, required certifications and qualifications, and DRRS-N Pillars. References include:
CNSL/CNSPINST 3502.3 - SFRM
CNSP/CNSLINST 3500.11 – SFEM
CNSP/CNSLINST 4700.1A – Total Ship Readiness Assessment (TSRA) Instruction
CNSP/CNSLINST 3500.10 – Readiness Evaluations (READ-E) Instruction
CNSPINST 3502.2A – LCS Training Manual
COMLCSRONONEINST 4790.6 – LCS Material Readiness Management Manual
COMLCSRONONEINST 4790.4 - Material Support Team (MST) Standard, Mission, Expectations, Agendas, Suppliers, Customers, and Outputs
CM-3: ADMIN IN THE COMMAND Describe methods to manage the ship’s routine, list various ticklers and required meetings/programs, understand ship and personnel awards, EVALS, and retention tools. References include:
US Navy Regulations 1990
OPNAVINST 3120.32 - SORM
MILPERSMAN
SECNAVINST 5215.1 – Navy Directives Issuance System
SECNAVINST 5216.5 – Navy Correspondence Manual
SECNAVINST M5210.2 – SSIC Codes
CNSFINST 5400.1 – CNSF Force Regulations
OPNAV PO9B2-107 & PO9B2-105 – SDNL Part 1 and 2
CNSFINST 5400.1 – CNSF Force Regulations
NAVMED P-117 – Medical Manual
CFFCINST-COMNAVPERSINST 1300.1 – Enlisted Manning Policy and Procedures
CNSP/CNSLINST 3502.3 – SFRM
SECNAVISNT 1650.1 – Awards Manual
SECNAVINST M5510.30 – DON Personnel Security Program
BUPERSINST 1430.16F – Advancement Manual
CNSFINST 6000.1 – Shipboard Medical Procedures
ISIC/AOR Directives
35
Command Management (CM) CM-7: PERSONNEL MANAGEMENT: WATCHBILLS, TRAINING, PQS Understand the XO’s role in Watch Team requirements, how to properly assess risk, and how to manage fatigue in the watch team. Discuss how to build and maintain watch team planning tools. References include:
OPNAVINST 3120.32 Series – SORM
CNSP/CNSLINST 3502.3 – SFRM
CNSP/CNSLINST 3500.11 – SFEM
CNSP/CNSLINST 3500.1 – READ-E Instruction
CNSP/CNSLINST 3502.5 – Mission Area WTCC Requirements
Ship’s Manning Document
Class Tactical Manuals
NAVDORM/EDORM CM-9: DRRS-N Become familiar with how DRRS-N works, its inputs, and how it is use by higher echelon commanders. Understand reporting requirements and the CO’s roles and responsibilities with regards to DRRS-N and how the XO can facilitate success. References include:
Title 10 USC 117 – Readiness reporting system: establishment; reporting to Congressional Committees
DoD Directive 7730.65 – Department of Defense Readiness Reporting System
DODI 7730.66 – Guidance for the Defense Readiness Reporting System
OPNAVINST 3501.360 – Defense Readiness Reporting System
OPNAVINST 3500.38B – Universal Naval Task List
OPNAVINST C3501.2K CH-1 – Mission Area and ROC/POE Statements
NTRP 1-03.5 – DRRS-N Reporting Manual
NWP 1-03.1 – Operational Reports
DRRS-N SUM 3.0.61 – Software User’s Manual
COMUSFLTFORCOM/CPFINST 3501.5 – DRRS-N Reporting Guidance
OPNAVINST C3501.385 – DRRS-N BMD SUPP
CNSP/CNSLINST 3040.2 – Casualty Reporting
CJCSI 3401.02B – Force Readiness Reporting
OPNAVINST 3501.383 – Fleet Readiness Reporting Guidance CM-12: STRATEGIC DOCUMENTS REVIEW Describe the policy documents that influence at-sea operations and explain how and understanding of the overarching strategy and associated documents helps communicate intent. References include:
http://www.navy.mil/strategicdocs.asp CM-13: SHIP SAFETY PROGRAMS Describe Command Safety Programs and requirements to include surveys and assessments. References include:
OPNAVINST 5100.19 Series – NAVOSH for Forces Afloat
OPNAVINST 3500.39C - ORM
OPNAVINST 5100.12J – Traffic Safety
OPNAVINST 5100.25C – Off-duty Safety
ALSAFE Messages and Afloat Safety Digests
36
Command Management (CM) CM-17: ENLISTED ADANCEMENT AND SELECTION BOARDS Describe how to effectively write enlisted evaluations and prepare Sailors for selection boards. References include:
COMNAVPERSCOMINST 1300.1 – Enlisted Manning Policy and Procedures
CNSP/CNSLINST 3502.3 - SFRM
SECNAVINST 1650.1 – Awards Manual
SECNAVINST M5510.30 – DON Personnel Security Program
BUPERSINST 1430.16F – Advancement Manual CM-35: AVIATION SAFETY Understand critical safety tenets for conducting aviation operations at sea and discuss lessons learned from past incidents. References include:
NATOPS
Polar Plots CM-38: THE TRIAD Understand the relationship between the ship’s Triad and the ISIC. Discuss best practices for effectively communicating to the ISIC and understand how to leverage the staff for supporting shipboard operations. CM-41: MENTORING AND MIDTERM COUNSELING Describe how to effectively mentor enlisted personnel and officers, and how to perform effective midterm counseling. References include:
US Navy Regulations 1990
OPNAVINST 3120.32 - SORM
BUPERSINST 1610.10 - EVALMAN
MILPERSMAN 1910-202 – Counseling and Rehabilitation
NAVPERS 1616/26 - Evaluation Report and Counseling Record (E1-E6)
SECNAVINST 5216.5 – Naval Correspondence Manual CM-44: ORGANIZATIONAL BEHAVIOR Describe how to effectively mentor enlisted personnel and officers, and how to perform effective midterm counseling. References include:
US Navy Regulations 1990
OPNAVINST 3120.32 - SORM
BUPERSINST 1610.10 - EVALMAN
MILPERSMAN 1910-202 – Counseling and Rehabilitation
NAVPERS 1616/26 - Evaluation Report and Counseling Record (E1-E6)
SECNAVINST 5216.5 – Naval Correspondence Manual CM-47: PBED Understand and implement the Plan, Brief, Execute, and Debrief (PBED) discuss best practices. References include:
NWP 5-01 – Navy Planning
JP 5-0 – Joint Operation Planning
JP 3-0 – Joint Operations
OPNAVINST 3500.39C – Operational Risk Management
37
Command Management (CM)
CM-49: RISK MANAGEMENT Understand the requirements for assessing and managing risk during at-sea operations and discuss best practices to manage risk as the XO. References include:
OPNAVINST 5100.19E – NAVOSH Program Manual for Forces Afloat
OPNAVINST 3500.39C – Operational Risk Management
OPNAVINST 5100.12J – Navy Traffic Safety Program
OPNAVINST 5100.25C – Navy Recreation and Off-duty Safety Program
ALSAFE 043/13 – Requirements for the Designation of Safety Authority CM-50: THE XO’S ROLE IN WARFIGHTING Understand the role of the XO as the number 2 warfighter onboard the ship and how to balance both administrative duties and tactical competence. CM-58: ISIC AND STAFF RELATIONSHPS Understand the relationship between the ship’s Triad and the ISIC. Discuss best practices for effectively communicating to the ISIC and understand how to leverage the staff for supporting shipboard operations.