Surface crawlers Surface crawlers for the (w)hole world Atlas Copco's range of surface crawlers raises the quality of rock drilling to a new level. The lowest cost per tonne of rock produced comes from the higher productivity; straighter holes and better overall economy are designed into the range. These surface crawlers include several models that are ideally suited for bench drilling. Choose between hydraulic top- hammer, Atlas Copco's patented COPROD system, or down-the-hole drilling methods. The unique SmartRig will help you to drill smarter holes with high shift capacity, low energy consumption, and innovative modules that improve productivity. Atlas Copco's range of crawlers is setting new standards for stability, maneuverability and safety in quarries and contracting work. Tophammer drill rigs Hole range ROC T15 23-45 mm ROC D3 35-89 mm ROC D7 64-115 mm ROC D9 76-115 mm SmartRig ROC D7C/D9C 64-115 mm SmartRig ROC F9C 89-127 mm Slienced SmartRig ROC D7C/D9C 64-115 mm ROC D7/D9RRC 64-115 mm ROC F9 89-127 mm ROC L7(40) 89-127 mm CM 470 64-89 mm CM 470LC 64-89 mm ECM 580 64-102 mm ECM 585 64-102 mm ECM 590 64-115 mm ECM 660 76-115 mm ECM 720 102-140 mm
Atlas Copco's range of surface crawlers raises the quality of
rock drilling to a new level. The lowest cost per tonne of rock
produced comes from the higher productivity; straighter holes and
better overall economy are designed into the range. These surface
crawlers include several models that are ideally suited for bench
drilling. Choose between hydraulic top-hammer, Atlas Copco's
patented COPROD system, or down-the-hole drilling methods. The
unique SmartRig will help you to drill smarter holes with high
shift capacity, low energy consumption, and innovative modules that
improve productivity. Atlas Copco's range of crawlers is setting
new standards for stability, maneuverability and safety in quarries
and contracting work.
Tophammer drill rigs Hole range
ROC T15 23-45 mm ROC D3 35-89 mm ROC D7 64-115 mm ROC D9 76-115
mm SmartRig ROC D7C/D9C 64-115 mm SmartRig ROC F9C 89-127 mm
Slienced SmartRig ROC D7C/D9C 64-115 mm ROC D7/D9RRC 64-115 mm ROC
F9 89-127 mm ROC L7(40) 89-127 mm CM 470 64-89 mm CM 470LC 64-89 mm
ECM 580 64-102 mm ECM 585 64-102 mm ECM 590 64-115 mm ECM 660
76-115 mm ECM 720 102-140 mm
Down the hole drill rigs Hole range
ROC F6 85-130 mm ROC L6(25)/L6(30) 92-152 mm ROC L8(25)/L8(30)
110-203 mm CM 765 92-152 mm CM 785 110-165 mm
COPROD drill rigs Hole range
ROC F9CR 90-127 mm ROC L7(40)CR 105-180 mm
Pneumatic drill rigs Hole range
ROC 203 TH 48-76 mm ROC 203 DTH 85-130 mm ROC 442 PC 41-115 mm
ROC 460 PC/460 HF 92-178 mm CM 341 105-115 mm/
115-140 mm CM 348 TH 64-102 mm BVB 25 TH 48-76 mm BVB 25 DTH
92-130 mm ROC P55 92-152 mm
