Upload
vodung
View
231
Download
0
Embed Size (px)
Citation preview
113
Surface mounting consumer units - IP66
> CONSUMER UNITSDOMINO Series
M135 2 135x76x102 6W 1/24 i 672.2002 -
Module
> SPECIAL CONFIGURATION:
DINmodules(17,5mm)
Dissipatedpower (*)
Dimensionsh x b x p (mm)
Standardversion
Specialconfiguration
M250 16 250x328x140 28W 1/6 i 672.2016 672.2016.1101
Module
DINmodules(17,5mm)
Dissipatedpower (*)
Dimensionsh x b x p (mm)
Standardversion
Specialconfiguration
Specialconfiguration
M190 4 190x112x106 10W 1/16 i 672.2004 -
Module
DINmodules(17,5mm)
Dissipatedpower (*)
Dimensionsh x b x p (mm)
Standardversion
Specialconfiguration
112
1.3
Windowcolour
Self-adhesive label for
identification data Lock kitConnection
devices
IP00
0: without window (IP40 only) 0: without label 0: with triangular key 0: without connection device
1: tinted window (standard) 1: with label 1: no (IP40 only) 1: 1 (5x10 mm2 - 5x16 mm2)
2: white window (IP40 only) 2: yale key Locking kit 2: 2 (5x10 mm2 - 5x16 mm2)
3: n°=DIN
Consumer units Accessories
A B C D
6 7 2 . 2 0 1 2 . A B C D
M400 24 (12X2) 400x256x140 30W 1/6 i 672.4024 672.4024.1102
Module
DINmodules(17,5mm)
Dissipatedpower (*)
Dimensionsh x b x p (mm)
Standardversion
Specialconfiguration
M550 48 (16X3) 550x328x140 54W 1/3 i 672.5048 672.5048.1102
Module
DINmodules(17,5mm)
Dissipatedpower (*)
Dimensionsh x b x p (mm)
Standardversion
Specialconfiguration
(*) According to CEI 23-49 italian standard. - Terminal blocks: page 160-161.- Accessories: from page 150
M700 64 (16X4) 700x328x140 60W 1 i 672.7064 672.7064.1102
Module
DINmodules(17,5mm)
Dissipatedpower (*)
Dimensionsh x b x p (mm)
Standardversion
Specialconfiguration
M400 32 (16X2) 400x328x140 47W 1/4 i 672.4032 672.4032.1102
Module
DINmodules(17,5mm)
Dissipatedpower (*)
Dimensionsh x b x p (mm)
Standardversion
Specialconfiguration
M250 12 250x256x140 22W 1/9 i 672.2012 672.2012.1101
Module
DINmodules(17,5mm)
Dissipatedpower (*)
Dimensionsh x b x p (mm)
Standardversion
Specialconfiguration
M190 8 190x184x106 14W 1/10 i 672.2008 672.2008.1101
Module
DINmodules(17,5mm)
Dissipatedpower (*)
Dimensionsh x b x p (mm)
Standardversion
Module 150
115
1.3Surface mounting consumer units - IP66
114
> ENCLOSURE WITH BLANK FRONT PANELDOMINO Series
M150150x256x115 18W 1/6 i 672.1101
150x328x115 20W 1/6 i 672.1100
Module
DINmodules(17,5mm)
Socketoutlets
Dissipatedpower (*)
Dimensionsh x b x p (mm)
Note: Modules 150 and 250 are the basic elements that allow for anyother kind of combination. All the enclosures can be enlarged withmodules 150 and 250, even after installation. With 150 and 250 Modules,it is possibile to realise all sorts of combinations; modules 400, 550 and700 speed up and simplify the wiring of the more commonly usedversions.
Coupler
Module 550
Module 400
Module 250
> COMPONENTSDOMINO Series
150x328x115 6 i 674.1000 i 674.1100
150x256x115 6 i 674.1001 i 674.1001
Dimensions (mm) CoverBase
(*) According to CEI 23-49 italian standard. - Accessories: from page 150
- Terminal blocks: page 160-161
M550 16 550x328x140 28W 1/3 i 672.5116
Module
DINmodules(17,5mm)
Socketoutlets
Dissipatedpower (*)
Dimensionsh x b x p (mm)
M40012 400x256x140 22W 1/6 i 672.3100
16 400x328x140 28W 1/4 i 672.4116
Module
DINmodules(17,5mm)
Socketoutlets
Dissipatedpower (*)
Dimensionsh x b x p (mm)
M340 8 340x184x140 14W 1/10 i 672.2100
Module
DINmodules(17,5mm)
Socketoutlets
Dissipatedpower (*)
Dimensionsh x b x p (mm)
BASE: - Complete with insulating caps for double insulation.- With facility DIN rail fixure.
COVER: - Complete with fastening screws.
According to CEI 23-49 italian standard.
> EMPTY RUBBER PANELSGOMMA Series
Portable with handle 12 380x260x130mm 20W 6 690.4200-00
Surface mounting 12 380x260x130mm 20W 6 692.4200-00without handle
TypeDIN
modules DimensionDissipatedpower (*)
(*) According to CEI 23-49 italian standard.
> TWO FRONT UNIT - IP54GOMMA Series
Double sided unit 325x260x196mm 14+14W 1 692.4300-00
Tubolar stand with Ø 80x1000mm 1 692.4330anchor plates
Description DimensionsDissipatedpower (*)
117
Surface mounting enclosure - IP66
116
1.3
> ENCLOSURES WITH IEC309 SERIES OR EUREKA SERIES CUT-OUTSDOMINO Series
M1502 (•) 150x256x115 18W 1/6 i 672.1301
3 (•) 150x328x115 20W 1/6 i 672.1300
Module
DINmodules(17,5mm)
Socketoutlets
Dissipatedpower (*)
Dimensionsh x b x p (mm)
IP44page 70
LIBERA Series
IP44page 70
IP44page 60
IP67page 60
IP44pages 72
IEC309 Series DOMO Series
IP44page 52
IP67page 54
IP44page 44
IP67page 44
IP44page 53
IP67page 55
> COMPONENTSEUREKA Series
412. 200. 200. 430. 435. 570.
IP55page 437
570.417. 242. 247. 452. 457.
IP67page 167
COMMAND Series
590.
> COMPONENTSDOMINO Series
150x328x115 6 674.1000 674.1300
150x256x115 6 674.1001 674.1301
Dimensions (mm) Base Cover Cover
M550 16 6 (•) 550x328x140 28W 1/3 i 672.5616
Module
DINmodules(17,5mm)
Socketoutlets
Dissipatedpower (*)
Dimensionsh x b x p (mm)
(*) According to CEI 23-49 italian standard.(•)16A (70x87 mm) or, with suitable adaption, 32A socket (84x106 mm)(Δ) 63A (100x110 mm)
(■) 16A (70x87 mm)(◆) 32A (84x106 mm)- Accessories: from page 150- Terminal blocks: page 160-161
12 2 (•) 400x256x140 22W 1/6 i 672.3300
M400 12 1 (Δ) 400x256x140 22W 1/6 i 672.3302
16 3 (•) 400x328x140 28W 1/4 i 672.4316
Module
DINmodules(17,5mm)
Socketoutlets
Dissipatedpower (*)
Dimensionsh x b x p (mm)
M340 8 2 (■) 340x184x140 14W 1/10 i 672.2300
M340 8 1 (◆) 340x184x106 14W 1/10 i 672.2301
Module
DINmodules(17,5mm)
Socketoutlets
Dissipatedpower (*)
Dimensionsh x b x p (mm)
BASE: - Complete with insulating caps for double insulation.- With facility DIN rail fixure.
COVER: - With blank plate and fastening screws for the cover and thesocket outlets.
- Allows for installation of 16A socket (flange 70x87mm) or with suitable adaption, 32A socket (84x106mm).
> EMPTY CASINGADAPTO Series
Casing for 4-way adaptorsportable or suspended (PG21) 1/4 i 623.4500-000
elevated installation 1/4 i 625.4500-000
Casing for 3-way adaptors portable or suspended (PG21) 1/4 i 623.3500-000
and protection devices (6 DIN) elevated installation 1/4 i 625.4500-000
Description Installation
- Protection degree max. IP66 depending on the socket outletsinstalled.
- Zinc-plated steel carrying handles. - Provided with cable clamp.
(*) (*)
Domestic
16A
32A
FLANGE
(*) Opening suitable for SCAMEindustrial 16A socket outlets (flange70x87 mm) 32A socket outlets(flange 84x106 mm) and socketoutlets for domestic application(flange 70x87 mm).
119
1.3Surface mounting enclosure - IP66
118
(■)
(■)
(■)
(▲)
(•)(•)
(■)
(•)
(■)
(▲)
(*) According to CEI 23-49 italian standard.(♦) With YALE look.(•) 70x87 mm cut-outs.(▲) 50x60 mm cut-outs.(■) Cut-outs suitable for 32A socket outlets with 84x106 mm flange.- Accessories: from page 150.- Terminal blocks: page 160-161.
(*) According to CEI 23-49 italian standard.(♦) With YALE look.(•) 70x87 mm cut-outs.(▲) 50x60 mm cut-outs.(■) cut-outs suitable for 32A socket outlets with 84x106 mm flange.- Accessories: from page 150.- Terminal blocks: page 160-161.
> DISTRIBUTION ASSEMBLIES WITH IEC309 SERIES OR EUREKA SERIES CUT-OUTS
BLOCK Series
BLOCK 1 41 110x280x95 8W 1 i 632.1500-000
NO 110x280x95 8W 1 i 632.1510-000
DescriptionDIN
modulesSocketoutlets
Dissipatedpower (*)
Dimensions(mm)
(■)
4 212x415x105 14W 1 i 632.4500-000
4 212x415x105 14W 1 (♦) i 632.4700-000
BLOCK 4 10 NO 212x415x105 14W 1 i 632.4510-000
NO 212x415x105 14W 1 (♦) i 632.4710-000
5 (2+3) 212x415x105 14W 1 632.4520-000
DescriptionDIN
modulesSocketoutlets
Dissipatedpower (*)
Dimensions(mm)
BLOCK 3 BLANK4 136x440x105 9W 1 i 632.3501-000
NO 136x440x105 9W 1 i 632.3511-000
DescriptionDIN
modulesSocketoutlets
Dissipatedpower (*)
Dimensions(mm)
3 136x440x105 9W 1 i 632.3500-000
BLOCK 3 6 NO 136x440x105 9W 1 i 632.3510-000
4 (2+2) 136x440x105 9W 1 632.3520-000
DescriptionDIN
modulesSocketoutlets
Dissipatedpower (*)
Dimensions(mm)
IP44page 70
LIBERA Series
IP44page 70
IP44page 60
IP67page 60
IP44pages 72
IEC309 Series DOMO Series
IP44page 52
IP67page 54
IP44page 44
IP67page 44
IP44page 53
IP67page 55
> COMPONENTSEUREKA Series
412. 200. 200. 430. 435. 570.
IP55page 437
570.417. 242. 247. 452. 457.
IP67page 167
COMMAND Series
590.
> EMPTY DISTRIBUTION ASSEMBLIESMBOX Series
MBOX2 6 EUREKA sockets 16-32A NO 29W 1 656.0026-000 656.0926-000
MBOX39 EUREKA sockets 16-32A YES - 1 657.0038-000 657.0938-000
9 EUREKA sockets 16-32A NO - 1 657.0039-000 657.0939-000
Type Housing PowerWith door
Dissipatedpower (*)
(*) According to CEI 23-49 italian standard.- Accessories: from page 150.
Blank plateWith emergency
push button Blank plateWith emergency
push button
121
Surface mounting enclosure - IP66
120
1.3
> ENCLOSURES WITH OMNIA SERIES CUT-OUTSDOMINO Series
M150 (#) 2 150x328x115 20W 1/6 i 672.1200
Module
DINmodules(17,5mm)
Socketoutlets
Dissipatedpower (*)
Dimensionshxbxp (mm)
3 550x328x140 28W 1/3 i 672.5316 (▲)M550 (•)
16 4 550x328x140 28W 1/3 i 672.5416
Module
DINmodules(17,5mm)
Socketoutlets
Dissipatedpower (*)
Dimensionshxbxp (mm)
(*) According to CEI 23-49 italian standard(#) Can house OMNIA Series consumer unit art. 572.0120 (page 98).(•) Connection device to be fixed in the upper side(▲) With cutouts to contain 2 OMNIA Series 16A or 32A and 1 OMNIA
Series 63A
- Accessories: from page 150- Terminal blocks: page 160-161
IP44page 81
> COMPONENTSOMNIA Series
Without fuse carrierOMNIA Series
With fuse carrier
IP67page 81
IP44page 80
IP67page 80
M400 (•)12 1 400x256x140 22W 1/6 i 672.3200
16 2 400x328x140 28W 1/4 i 672.4216
Module
DINmodules(17,5mm)
Socketoutlets
Dissipatedpower (*)
Dimensionshxbxp (mm)
M340 8 1 340x184x106 14W 1/10 i 672.2200
Module
DINmodules(17,5mm)
Socketoutlets
Dissipatedpower (*)
Dimensionshxbxp (mm)
ISOLATOR Series
> COMPONENTSDOMINO Series
150x328x115 6 674.1000 674.1200
Dimensions (mm)
BASE: - Complete with insulating caps for double insulation.- With facility DIN rail fixure.
COVER: - Allows for installation of 2 OMNIA Series socket outlets.- Complete with fastening screws.
400. 405. 401. 406.
IP55page 171
590.
Base Cover
123
1.3Surface mounting enclosure - IP66
122
(*) According to CEI 23-49 italian standard.- Accepts from 2 to 4 embedded OMNIA Series sockets, groups 400
and 405, from 2 to 4 embedded OMNIA Series sockets with fuse boxbase, groups 401 and 406, or hole-covering masks, item 654.0120(page 98).
- Accessories: fom page 150.
> ENCLOSURES WITH OMNIA SERIES CUT-OUTSOMNIA System
“Consumer unit 136x472x146 12W 1 i 572.0311
6 DIN” system 136x616x146 12W 1 i 572.0313
DescriptionDissipatedpower (*)
Dimensions(mm)
136x472x146 - 1 i 572.0312
“Blank plate” system 136x616x146 - 1 i 572.0314
287x408x146 - 1 i 572.0316
DescriptionDissipatedpower (*)
Dimensions(mm)
Box for 2 OMNIA Series 136x275 - 1 i 572.0322socket outlet 16/32A
DescriptionDissipatedpower (*)
Dimensions(mm)
> EMPTY DISTRIBUTION ASSEMBLIESMBOX Series
MBOX2 4 OMNIA sockets 16-32A NO 27W 1 656.0024-000 656.0924-000
Housing PowerWith door
IP44page 81
> COMPONENTSOMNIA Series
Without fuse carrierOMNIA Series
With fuse carrier
IP67page 81
IP44page 80
IP67page 80
ISOLATOR Series
400. 405. 401. 406.
IP55page 171
590.
Dissipatedpower (*)
With emergencypush buttonBlank plate
With emergencypush buttonBlank plate
With emergencypush buttonBlank plate
5 OMNIA sockets 16-32-63A NO - 1 657.0035-000 657.0935-000
MBOX36 OMNIA sockets 16-32A
YES - 1 657.0036-000 657.0936-000
NO - 1 657.0037-000 657.0937-000
Housing PowerWith door
Dissipatedpower (*)
(*) According to CEI 23-49 italian standard.- Accessories: from page 150.
MBOX5 12 OMNIA sockets 16-32AYES - 1 658.0050-000 658.0950-000
NO - 1 658.0051-000 658.0951-000
Housing PowerWith door
Dissipatedpower (*)
125
Surface mounting consumer units - IP40
> SURFACE MOUNTING CONSUMER UNITS - WITHOUT WINDOW
4 DIN 2/4 130x97x84 9W 1/36 i 673.2102 i 673.2102B -
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm) grey base white base
white basespecial configuration
124
1.3
18 DIN 36+4 (18+2)-(18+2) 400x434x140 75W (108WΔ) 1/4 i 673.4136 i 673.4136B 673.4136B.0012
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm) grey base white base
white basespecial configuration
(*) According to CEI 23-49 italian standard.(Δ) 2 consumer units on top of each other joined by specially
designed accessories.
- Accessories: from page 150.- Terminal block: page 160-161.
DOMINO Series
18 DIN 54+6 (18+2)-(18+2)-(18+2) 550x434x140 103W (140WΔ) 1/2 i 673.5154 i 673.5154B 673.5154B.0012
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm) grey base white base
white basespecial configuration
18 DIN 18+2 (18+2) 250x434x140 43W (85WΔ) 1/6 i 673.2118 i 673.2118B 673.2118B.0012
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm) grey base white base
white basespecial configuration
12 DIN 24+4 (12+2)-(12+2) 400x326x108 41W (87WΔ) 1/5 i 673.4124 i 673.4124B 673.4124B.0012
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm) grey base white base
white basespecial configuration
12 DIN 12+2 (12+2) 400x326x108 25W (50WΔ) 1/7 i 673.2112 i 673.2112B 673.2112B.0012
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm) grey base white base
white basespecial configuration
8 DIN 8+2 (8+2) 190x254x108 18W 1/12 i 673.2108 i 673.2108B 673.2108B.0012
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm) grey base white base
white basespecial configuration
4 DIN 4+1/2 (4+1/2) 190x135x108 11W 1/24 i 673.2104 i 673.2104B -
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm) grey base white base
white basespecial configuration
> SPECIAL CONFIGURATION:
Window colourSelf-adhesive label for
identification data Lock kitConnection
devices
IP00
0: without window (IP40 only) 0: without label 0: with triangular key 0: without connection device
1: tinted window (standard) 1: with label 1: no (IP40 only) 1: 1 (5x10 mm2 - 5x16 mm2)
2: white window (IP40 only) 2: yale key Locking kit 2: 2 (5x10 mm2 - 5x16 mm2)
3: n°=DIN
Consumer units Accessories
A B C D
6 7 2 . 2 0 1 2 . A B C D
127
Surface mounting consumer units - IP40 1.3
> CONSUMER UNITS - WITH WINDOW
8 DIN 8+1 (8+1) 190x254x108 17W 1/12 i 673.2008 i 673.2008B 673.2008B.2010 673.2008B.2012 673.2008B.1101
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm)
grey base tinted
window
whitebase tinted
window
white base white
window (◆) (•)
white base white
window (◆) (•)
white base tinted
window (◆)
DOMINO Series
18 DIN 54+5 (18+2)-(18+2)-(18+2) 550x434x140 75W (125WΔ) 1/2 i 673.5054 i 673.5054B 673.5054B.2010 673.5054B.2012 673.5054B.1102
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm)
grey base tinted
window
whitebase tinted
window
white base white
window (◆) (•)
white base white
window (◆) (•)
white base tinted
window (◆)
(*) According to CEI 23-49 italian standard.(Δ) 2 consumer units on top of each other joined by specially
designed accessories.(◆) Special configuration.(•) Without triangular lock; snap-closing.(▲) Single package.
- Accessories: from page 150.- Terminal blocks: page 160-161.
18 DIN 36+4 (18+2)-(18+2) 400x434x140 57W (96WΔ) 1/4 i 673.4036 i 673.4036B 673.4036B.2010 673.4036B.2012 673.4036B.1102
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm)
grey base tinted
window
whitebase tinted
window
white base white
window (◆) (•)
white base white
window (◆) (•)
white base tinted
window (◆)
18 DIN 18+1 (18+1) 250x434x140 42W (74WΔ) 1/6 i 673.2018 i 673.2018B 673.2018B.2010 673.2018B.2012 673.2018B.1101
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm)
grey base tinted
window
whitebase tinted
window
white base white
window (◆) (•)
white base white
window (◆) (•)
white base tinted
window (◆)
12 DIN 24+4 (12+2)-(12+2) 400x326x108 35W (63WΔ) 1/5 i 673.4024 i 673.4024B 673.4024B.2010 673.4024B.2012 673.4024B.1102
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm)
grey base tinted
window
whitebase tinted
window
white base white
window (◆) (•)
white base white
window (◆) (•)
white base tinted
window (◆)
12 DIN 12+1 (12+1) 250x326x108 24W (48WΔ) 1/7 i 673.2012 i 673.2012B 673.2012B.2010 673.2012B.2012 673.2012B.1101
Multiplesof
DIN modules(17,5mm)
Total for row
Dissipatedpower (*)
DimensionsAxBxC (mm)
grey base tinted
window
whitebase tinted
window
white base white
window (◆) (•)
white base white
window (◆) (•)
white base tinted
window (◆)
126
> SPECIAL CONFIGURATION:
Window colourSelf-adhesive label for
identification data Lock kitConnection
devices
IP00
0: without window (IP40 only) 0: without label 0: with triangular key 0: without connection device
1: tinted window (standard) 1: with label 1: no (IP40 only) 1: 1 (5x10 mm2 - 5x16 mm2)
2: white window (IP40 only) 2: yale key Locking kit 2: 2 (5x10 mm2 - 5x16 mm2)
3: n°=DIN
Consumer units Accessories
A B C D
6 7 2 . 2 0 1 2 . A B C D
129
Flush mounting consumer units - IP40
> CONSUMER UNITS - WITH WINDOW
4 DIN 4+1/2 (4+1/2) 180X150X75 (••) 17W 1/38 i 675.2104 i 675.2104B - - -
Multiplesof
DIN modules(17.5 mm)
totals/for rowDimension
(mm) AxBxCDissipatedpower (*)
Greybasetinted
window
White basetinted
window
Whitebase white
window (◆) (•)
Whitebase white
window (◆) (•)
Whitebase tinted
window (◆)
128
1.3
DOMINO Series
12 DIN 12+1 (12+1) 270x326x75 32W 1/7 i 675.2012 i 675.2012B 675.2012B.2010 675.2012B.2012 675.2012B.1101
Multiplesof
DIN modules(17.5 mm)
totals/for rowDimension
(mm) AxBxCDissipatedpower (*)
Greybasetinted
window
White basetinted
window
Whitebase white
window (◆) (•)
Whitebase white
window (◆) (•)
Whitebase tinted
window (◆)
18 DIN 36+4 (18+2)- (18+2) 420x434x95 61W 1/3 i 675.4036 i 675.4036B 675.4036B.2010 675.4036B.2012 675.4036B.1102
Multiplesof
DIN modules(17.5 mm)
totals/for rowDimension
(mm) AxBxCDissipatedpower (*)
Greybasetinted
window
White basetinted
window
Whitebase white
window (◆) (•)
Whitebase white
window (◆) (•)
Whitebase tinted
window (◆)
18 DIN 54+3 (18+1)-(18+1)-(18+1) 570x434x95 71W 1/2 i 675.5054 i 675.5054B 675.5054B.2010 675.5054B.2012 675.5054B.1102
Multiplesof
DIN modules(17.5 mm)
totals/for rowDimension
(mm) AxBxCDissipatedpower (*)
Greybasetinted
window
White basetinted
window
Whitebase white
window (◆) (•)
Whitebase white
window (◆) (•)
Whitebase tinted
window (◆)
18 DIN 18+1 (18+1) 270x434x75 36W 1/7 i 675.2018 i 675.2018B 675.2018B.2010 675.2018B.2012 675.2018B.1101
Multiplesof
DIN modules(17.5 mm)
totals/for rowDimension
(mm) AxBxCDissipatedpower (*)
Greybasetinted
window
White basetinted
window
Whitebase white
window (◆) (•)
Whitebase white
window (◆) (•)
Whitebase tinted
window (◆)
12 DIN 24+4 (12+2)-(12+2) 420x326x95 52W (74WΔ) 1/5 i 675.4024 i 675.4024B 675.4024B.2010 675.4024B.2012 675.4024B.1102
Multiplesof
DIN modules(17.5 mm)
totals/for rowDimension
(mm) AxBxCDissipatedpower (*)
Greybasetinted
window
White basetinted
window
Whitebase white
window (◆) (•)
Whitebase white
window (◆) (•)
Whitebase tinted
window (◆)
8 DIN 8+1/2 (8+1) 210x254x75 21W 1/10 i 675.2008 i 675.2008B 675.2008B.2010 675.2008B.2012 675.2008B.1101
Multiplesof
DIN modules(17.5 mm)
totals/for rowDimension
(mm) AxBxCDissipatedpower (*)
Greybasetinted
window
White basetinted
window
Whitebase white
window (◆) (•)
Whitebase white
window (◆) (•)
Whitebase tinted
window (◆)
(*) According to CEI 23-49 italian standard.(Δ) 2 consumer units on top of each other joined by specially
designed accessories.(••) Without window.(◆) Special configuration.(•) Without triangular lock; snap-closing.(▲) Single package.
- Accessories: from page 150.- Terminal blocks: page 160-161.
> SPECIAL CONFIGURATION:
Window colourSelf-adhesive label for
identification data Lock kitConnection
devices
IP00
0: without window (IP40 only) 0: without label 0: with triangular key 0: without connection device
1: tinted window (standard) 1: with label 1: no (IP40 only) 1: 1 (5x10 mm2 - 5x16 mm2)
2: white window (IP40 only) 2: yale key Locking kit 2: 2 (5x10 mm2 - 5x16 mm2)
3: n°=DIN
Consumer units Accessories
A B C D
6 7 2 . 2 0 1 2 . A B C D
131
Emergency call points
130
1.3
> FLUSH MOUNTING VERSION - IP55
With push buttom and hammer 100x100x50mm 1/13 i 676.25100
DescriptionDimension
(mm)
- Can be mounted in flush mounting box with centre-to-centre distance83.5 mm.
- With illuminated push buttom (24V incandescent or 250V fluorescentbayonet lamp -12V).
- With 1 NO contact and 1 NC contact (2A, 250V).- Complete with glass-breaking hammer.
> SURFACE MOUNTING VERSION - IP55
With push buttom and hammer 100x100x50mm 1/14 i 676.35100
DescriptionDimension
(mm)
- With illuminated push buttom (24V incandescent or 250V fluorescentbayonet lamp -12V).
- With 1 NO contact and 1 NC contact (2A, 250V).- Complete with glass-breaking hammer.
> SURFACE MOUNTING VERSION - IP65
With DIN rail (6 modules) 205x220x140mm 1/6 i 676.35201
With mounting plate 205x220x140mm 1/6 i 676.35205
DescriptionDimension
(mm)
- Equipped with flange to facilitate junctions.
EMERGENCYSeries
> SPARE COVER AND GLASS
100x100 mm 1/13 i 676.10101
Dimension(mm)
EMERGENCYSeries
> GLASS-BREAKING HAMMER
Glass-breaking hammer 1/10 i 676.10102
Description
EMERGENCYSeries
> FASTENING BRACKETS
Fastening brackets 1/20 i 676.10103
Description
EMERGENCYSeries
EVOLUTION Series
EMERGENCYSeries
EMERGENCYSeries
> BAYONET LAMP
220V Neutral 100 101.6200
110V Neutral 100 101.6200.11
12V Neutral 100 101.6200.12
24V Neutral 100 101.6200.24
Description Colour
133
Watertight cabinets IP65 1.3
132
655.005 2655.015 2
–
655.004 2655.014 2
–
655.003 2655.013 2
–
655.002 2655.012 2
–
655.001 2655.011 2
–
CABINET
BASE
PLAINgrey
WITH WINDOWtinted (LT) with
marine window (MV)
655.001 0655.011 0655.021 01 (•)
LT
MV
AI
655.001 1655.011 1
–
655.002 0655.012 0655.022 01 (•)
655.002 1655.012 1
–
655.003 0655.013 0655.023 01 (•)
655.003 1655.013 1
–
655.004 0655.014 0655.024 01 (•)
655.004 1655.014 1
–
655.005 0655.015 0655.025 01 (•)
655.005 1655.015 1
–
Possible formatsVariant A Variant B
Horizontalmodularity
M32012 DINper row
Tipo 1320x370x210
2 rows24 DIN
1+1
1+1
12 DIN
1/2+1+1/2
1/2+1+1/2
1/2+1+1+1/2
1/2+1+1+1+1/2
1/2+1+1+1+1+1/2
20 DIN40 DIN
40 DIN60 DIN
1+1+1
1+1+1+1
1+1+1+1
60 DIN80 DIN
105 DIN140 DIN
Tipo 2460x370x245
2 rows
Tipo 3460x520x245
3 rows
Tipo 4460x670x245
4 rows
Tipo 5755x715x345
4 rows
b x h x d = base x height x depth
M46020 DINper row
M75035 DINper row
Dimensionsb x h x p (mm)
DOOR
1 1 1
1 1 1
1 1 1
1 1 1
1 1 1
LT
MV
AI
LT
MV
AI
LT
MV
AI
LT
MV
AI
i
i
i
i
i
i
i
i
i
i
i
i
> KEY
LT = Thermoplastic alloyMV = Varnished metalAI = Stainless steel
655.001 5
267x294
407x294
655.002 5
655.003 5 655.003 6 655.003 9
655.004 5
655.005 5 655.005 6
655.005 9
655.004 6
655.002 6
655.001 6
-
-
655.005 50
-
-
-
-
655.005 60
-
-
655.001 9
Stainless steelsmooth zinc-coated
A x B (mm)
mounting plateA x B x C (mm) internal door
in thermoplastic material
A x B x C (mm)
MOUNTING PLATE INTERNAL DOOR
Blank Grey
UPRIGHT
couple
MOUNTING PLATE AND INTERNAL DOOR
EASYBOX Series
CABINET
1/4
1/4
1/2
1/2
1
655.001 4
655.002 4
655.003 4
655.004 4
655.005 4
1/4
1/4
1/2
1/2
1
1/8
1/9
1/9
1/9
1 1 1
1/8
1
1/10407x444
407x594
679x633
267x294x4,5
407x294x4,5
407x444x4,5
407x594x4,5
679x633x4,5 267x633x2
i
i
i
i
i
i
i
i
i
i
i
(•) Base supplied with blank door already mounted
135
Watertight cabinets IP65 1.3
134
655.320 11 655.320 12
655.750 10
655.460 10 655.460 11 655.460 12
655.750 11 655.750 12
655.320 10
DIN RAIL
with brackets
MODULAR PLATES
in metal, with brackets
1 MODULE 2 MODULE
1/10 1/8 1/4
1/12 1/8 1/4
1 1 1
1 MODULE
Possible formatsVariant A Variant B
Horizontalmodularity
M32012 DINper row
Tipo 1320x370x210
2 rows24 DIN
1+1
1+1
12 DIN
1/2+1+1/2
1/2+1+1/2
1/2+1+1+1/2
1/2+1+1+1+1/2
1/2+1+1+1+1+1/2
20 DIN40 DIN
40 DIN60 DIN
1+1+1
1+1+1+1
1+1+1+1
60 DIN80 DIN
105 DIN140 DIN
Tipo 2460x370x245
2 rows
Tipo 3460x520x245
3 rows
Tipo 4460x670x245
4 rows
Tipo 5755x715x345
4 rows
b x h x d = base x height x depth
M46020 DINper row
M75035 DINper row
Dimensionsb x h x p (mm)
CABINET
i i i
i i i
-
-
655.460 25
INTERNALDOOR PANEL
lock supplied
STANDARD PANELS
2 MODULE
655.320 24
655.460 24
655.750 24
PANEL FORMOULDED-CASE
CIRCUIT BREAKER
includes metal platewith DIN rail
1 MODULE
1/5
1/4
1
1/9
655.750 22(1 piece)
655.750 23
655.460 22
655.320 22 -
-
PANEL WITH DINVENT-HOLE
With DIN rail h= 150 mm
PLAIN PANEL
half module(2 pieces)h= 75 mm
quarter module(2 pieces)
h= 37,5 mm
1 MODULE 1 MODULE 1/2 MODULE 1/4 MODULE
655.320 20 655.320 21
655.460 20 655.460 21
655.750 20 655.750 21
1/5 1/8 1/10
1/4 1/10 1/10
1 1 1 1
EASYBOX Series
SPECIAL PANELS
i i
i i i i
137
Accessories
> POLE FIXING BRACKETEASYBOX Series
Type 1 1/3 655.32090
Type 2, 3 and 4 1/3 655.46090
Type 5 1 655.75090
DescriptionFor
enclosures
136
1.3
Fixing into polemax Ø 300mmcouple in metal
> TRIANGULAR KEY KITEASYBOX Series
Triangular key kit 1/10 655.900
Description Colour
> YALE KEY KITEASYBOX Series
Yale key kit1/10 655.910
transparent 1/10 655.911
Description Colour
> PADLOCKING KITEASYBOX Series
Accessory kit for padlocking (LT) 1/10 655.920
Description Colour
> BRACKETS KITEASYBOX Series
Additional brackets kit 1/10 655.930
Description
> VENTILATION KITEASYBOX Series
IP54 - 230V~ 1 655.950
Description
> DOCUMENT HOLDEREASYBOX Series
Document holder 1/10 655.960
Description
> SURFACE MOUNTING BRACKETSEASYBOX Series
Metal surface mounting brackets (MV and AI) - 4 pieces 1/10 655.970
Description
- Padlock not supplied. - Not suitable for metal doors. LT = Thermoplastic alloy MV = Varnished metal AI= Stainless steel
> SCABOX SERIES
139
Surface mounting junction boxes
> BOX WITH CABLE SLEVES
> CUBIK SERIES
SCABOX Series
ø65x35 4xø23mm PG 16 2 4/100 i 680.001
ø65x40 4xø23mm PG 16 2 4/100
Release cover ø80x40 4xø23mm PG 16 2 4/100 i 680.002
80x80x406xø23mm PG 16 2 4/60 i 680.003
7xø23mm PG 16 2 4/60
100x100x506xø23mm PG 21 4 1/48 i 685.004
7xø23mm PG 21 4 1/48
120x80x50 6xø29mm PG 21 4 1/54 i 685.005
150x110x70 10xø29mm PG 21 4 1/40 i 685.006 (K1)
Screw cover 190x140x70 10xø38mm PG 29 4 1/24 i 685.007 (K1)
240x190x90 12xø38mm PG 29 (◆) 4 1/12 i 685.008 (K1)
300x220x120 12xø38mm PG 29 (◆) 4 1/6 i 685.009 (K1)
380x300x120 12xø48mm PG 36 (◆) 4 1/4 i 685.010 (K1)
460x380x130 14xø48mm PG 36 (◆) 6 1 i 685.011 (K2)
CoverNo. of inlets For
Dimensions(mm)
Fixing screws
CUBIK Series
i 687.001 (★) i 688.001 (★)
i 687.002 (★) i 688.002 (★)
i 687.003 (★) i 688.003 (★) i 688.003.R (★)
i 687.004 i 688.004 i 688.004.R
i 687.005 i 688.005 i 688.005.R
i 687.006 i 688.006
IP44 IP55IP55
GW 650°CIP55
GW 960°CIP55
GW 960°C
(◆) Suitable for the hinges mounting.(★) Suitable for the threaded insert item 654.0020.(K1) It is possible to use the wall mounting brackets kit item 654.0021.(K2) It is possible to use the wall mounting brackets kit item 654.0023.
- Accessories: from page 150.
138
1.3
Cablet inlet through cable sleeve or cable gland, grooves on the bottomfor fixing terminal strips.
960°C
Glow wire 960°C versions (also inred) are identifiable by the symbolmarked on the external side.
IP55
688.204.R
141
Surface mounting junction boxes
140
1.3
> BOX WITH BLANK SIDESSCABOX Series
100x100x50 4 1/40 i 686.204 i 686.224
100x100x80 4 1/24 i 686.404 i 686.424
120x80x50 4 1/42 i 686.205 i 686.225
150x110x70 4 1/48 i 686.206 (K1) i 686.226 (K1)
190x140x70 4 1/30 i 686.207 (K1) i 686.227 (K1)
240x190x90 4 (◆) 1/16 i 686.208 (K1) i 686.228 (K1)
Screw cover 240x190x125 4 (◆) 1/6 i 686.408 i 686.428
300x220x120 4 (◆) 1/8 i 686.209 (K1) i 686.229 (K1)
300x220x170 4 (◆) 1/6 i 686.409 i 686.429
380x300x120 4 (◆) 1/4 i 686.210 (K1) i 686.230 (K1)
380x300x170 6 (◆) 1/3 i 686.410 (K1) i 686.430 (K1)
452x320x130 6 (◆) 1 i 686.211 (K2) i 686.231 (K2)
452x380x180 6 (◆) 1 i 686.411 (K2) i 686.431 (K2)
CoverFixing screws
Dimensions(mm)
IP56Blank cover
IP56Clear cover
IP56 Higher boxBlank cover
IP56 Higher boxClear cover
(◆) Suitable for the hinges mounting.(K1) It is possible to use the wall mounting brackets kit item 654.0021.(K2) It is possible to use the wall mounting brackets kit item 654.0023.
- Accessories: from page 150.
CUBIK Series
i 687.204 i 688.204 i 688.204.R
i687.205 i 688.205 i 688.205.R
i 687.206 i 688.206
IP55GW 650°C
IP55GW 960°C
IP55 GW 960°C
SCABOX SeriesHinges kit (3 pieces) Item 654.0085
> COVERSWBOX Series
Screw claw fixingØ 65 mm 50/600 i 875.4501
Ø 80 mm 40/480 i 875.4502
Description For boxes (mm)
- Supplied as spare parts.
Distribution assemblies Flush mounting boxes
> EMPTY DISTRIBUTION ASSEMBLIES - IP41
> DIMENSIONS
BEEBOX Series
200 x 150 x 40 26 639.1040
1 module 200 x 150 x 60 38 639.1060
200 x 150 x 80 25 639.1080
200 x 300 x 40 24 639.2040
200 x 300 x 60 18 639.20602 modules
200 x 300 x 80 12 639.2080
200 x 300 x 120 8 639.2120
400 x 300 x 60 8 639.4060
4 modules 400 x 300 x 80 6 639.4080
400 x 300 x 120 4 639.4120
DescriptionDimensions
(A x B x C) mm
142 143
> ROUND FLUSH MOUNTING BOX - IP40WBOX Series
Ø 65 mm 500 i 875.4201
Description
- Provided without cover and screw.
1.3
Separator
Guides on bottom for fitting terminal blocks(Ø 5 mm)
Flush mounting boxes
144 145
1.3
> SCREW COVERWBOX Series
Blank cover with screws for 3 modules flush mounting box 12/72 i 180.692
- Release installation- Thermoplastic material
Description
> PROTECTIVE COVERWBOX Series
For 3 modules flush mounting box cod. 875.4303 120 i 875.4603
Description
> RECTANGULAR FLUSH MOUNTING BOXWBOX Series
3 modules 83,5 6/300 i 875.4303
Modules
Distancebetween axesfor fixing (mm)
- Provided without cover and screw.
> FLUSH JUNCTION BOXESWBOX Series
92 x 92 x 45 1 1/170 i 875.4410
118 x 96 x 50 1 1/120 i 875.4411
118 x 96 x 70 1 1/90 875.4411P
153 x 98 x 70 1 1/70 i 875.4412
160 x 130 x 70 1 1/44 i 875.4413
196 x 152 x 70 2 Accept separator 152(*) 1/40 i 875.4414
294 x 152 x 70 3 Accept separator 152(*) 1/24 i 875.4415
392 x 152 x 70 4 Accept separator 152(*) 1/20 i 875.4416
480 x 160 x 70 3 Accept separator 160(*) 1/12 i 875.4417
Dimensions(mm) Compartmens
- Provided complete with box, cover and screws.(*) Provided without separator.
> SEPARATORSWBOX Series
Separator 152 152mm 25/200 875.4490
Separator 160 160mm 25/200 875.4491
Descriptions Dimensions
- To divide electric circuits.
FLUSH JUNCTION BOX 294x152x70 mm (3 COMPARTMENTS)
In thermoplastic material (*) 3 modules 120 i 875.4603
92x92 5/100 i 875.4610
118x96 5/160 i 875.4611
153x98 5/140 i 875.4612
In plasticised carton160x130 5/80 i 875.4613
196x152 5/60 i 875.4614
294x152 2/40 i 875.4615
392x152 2/30 i 875.4616
480x160 2/24 i 875.4617
Flush mounting boxes
> COVERSWBOX Series
92x92 5/100 i 875.4510
118x96 5/160 i 875.4511
153x98 5/140 i 875.4512
Cover without screws160x130 5/80 i 875.4513
196x152 5/60 i 875.4514
594x152 2/40 i 875.4515
392x152 2/30 i 875.4516
480x160 2/24 i 875.4517
Description Box (mm)
146 147
1.3
Provided without screws. Supplied as spare parts.
- Release installation.(*) For 3-module boxes item 875.4303.
The protective cover has been designed so to protect the inside of theconnector blocks during any building and painting operation.
> SCREWSWBOX Series
Screws for cover 3x19 1/120 i 875.4500
DescriptionDimension
(mm)
> PROTECTIVE COVERWBOX Series
Description Box (mm)
100 x 100 x 59 n° 2 M5x10mm n°1 M4x6 0,255 1/32 653.00
140 x 115 x 60 n° 4 M5x16mm n°1 M4x6 0,400 1/24 653.01
166 x 142 x 64 n°4 M5x16mm n°1 M4x6 0,585 1/16 653.02
192 x 168 x 80 n° 4 M5x16mm n°1 M4x6 0,870 1/12 653.03
253 x 217 x 93 n° 4 M6x20mm n°1 M4x6 1,760 1/6 653.04
314 x 264 x 122 n° 4 M6x20mm n°1 M4x6 2,880 1/2 653.05
410 x 315 x 150 n° 4 M6x20mm n°1 M4x6 6,500 1 653.07
Aluminium junction boxes
> ENCLOSURES - IP66ALUBOX Series
Dimensions (mm)
Screw forattaching cover
Earthingscrews
Weight(Kg)
- Enclosure and cover in die-cast aluminium. - Externally varnished. - With stainless steel screws for attaching cover and self-tapping
zinc-coated steel screws for earthing the enclosure and cover.= counter-sunk head screw. = flat head screw.
- Zinc-coated steel plate. - With zinc-coated steel self-tapping screws for attaching the plate.
148 149
1.3
100 x 100 x 56
140 x 115 x 60 n° 4 M4x6 1,5 1/40 653.011
166 x 142 x 64 n° 4 M4x6 1,5 1/20 653.012
192 x 168 x 80 n° 4 M4x6 1,5 1/20 653.013
253 x 217 x 93 n° 4 M4x6 1,5 1/10 653.014
314 x 264 x 122 n° 4 M4x6 1,5 1/10 653.015
410 x 315 x 150 n° 4 M4x6 2 0,770 5 653.017
> MOUNTING PLATESALUBOX Series
For enclosures(mm)
Screw forattaching cover Thickness
Weight(Kg)
100 x 100 x 56 1 653.020
140 x 115 x 60 1 653.021
166 x 142 x 64 1 653.022
192 x 168 x 80 1 653.023
253 x 217 x 93 1 653.024
314 x 264 x 122 1 653.025
410 x 315 x 150 1 653.027
> DIN RAIL KITALUBOX Series
For enclosures(mm)
Enclosures and covers in aluminium alloywith blank walls and covered.
Holding seal in expanded EPDM, alreadymounted in place on the cover
Fixing to wall by brackets incorporated inthe enclosure base
151
1.3Accessories
150
> WALL MOUNTING BRACKETS ACCESSORIES
DOMINO Series Surface mounting IP66 and IP40 4 pieces 10 654.0020
MBOX Series MBOX2 - MBOX3 - MBOX5 1/10 654.0024
SCABOX SeriesK1 4 pieces 10 654.0021
K2 2 pieces 10 654.0023
For enclosure Type
> HANDLE KITACCESSORIES
DOMINO Series Surface mounting IP66 10 654.0060
For enclosure Type
> COVER SEALING KITACCESSORIES
Surface mounting IP66 25 654.0030
DOMINO Series Surface mounting IP40 (2/4 din) 10 654.0032
Surface mounting IP40 10 654.0033
MBOX Series MBOX2 - MBOX3 - MBOX5 10 654.0032
SCABOX Series For box 190x140 - 240x190 10 654.0032300x220 - 380x300 - 452x320
For enclosure Type
- With nut, cable clamp and fastening screws.
(*) For door (2 pieces). (•) For DIN window.
> YALE LOCK KITACCESSORIES
Surface mounting IP66 25 654.0070
DOMINO Series Surface mounting IP40 10 654.0072
Flush mounting IP40 10 654.0072
MBOX SeriesMBOX3 - MBOX5 (*) 10 654.0071
MBOX2 - MBOX3 - MBOX5 (•) 10 654.0072
For enclosure Type
> RIDGED PROFILE FOR DIN RAILACCESSORIES
DOMINO Series Surface mounting IP66 h18mm 10and IP40 (320mm strip) 654.0090
For enclosure Type
> CONNECTION KITACCESSORIES
25 654.0038Surface mounting IP66
25 654.0030
6
DOMINO Series Surface mounting IP406
6
6
Flush mounting IP40 6
For enclosure TypeColour
654.0041B 654.0041
654.0042B 654.0042
654.0043B 654.0043
654.0044B 654.0044
654.0045
Multiples of 12 DIN(4-8-12-24) - horizontalMultiples of 18 DIN(18-36-54) - horizontalMultiples of 12 DIN(4-8-12-24) - verticalMultiples of 18 DIN(18-36-54) - vertical
PG21 Multiples of 12 DINPG36 Multiples of 16 DIN
153
1.3Accessories
152
> EN 50022 DIN RAIL VERTICALLY ADJUSTABLEACCESSORIES
DOMINO Series Surface mounting IP66 16 DIN 295 1 654.0750
M150-M400-M500 12 DIN 223 1 654.0751
For enclosure Type Suitable forDimensions
(mm)
> HINGE KITACCESSORIES
SCABOX Series 3 pieces 1/20 654.0085
For enclosure
> SEALING CAPSACCESSORIES
SCABOX Series 12 pieces 10/100 654.0080
For enclosure
> THREADED INSERTACCESSORIES
CUBIK Series 100 654.0022
For enclosure
- For providing total insulation according to EN 60439-1.
> SPARE PARTS KITACCESSORIES
MBOX Series MBOX3 - MBOX5 1 654.0002
For enclosure Type
> CABLE SUPPORT KITACCESSORIES
MBOX Series MBOX2 1/10 654.0051
For enclosure Type
> POLE FASTENING KITACCESSORIES
MBOX SeriesMBOX3 - MBOX5 10 655.32090
MBOX2 10 655.46090
For enclosure Type
- With mounting brackets
- Cable sleeve, reductions, brackets...
155
1.3Accessories
154
- Safety Extra Low Voltage (SELV).- Cables: black 220V~, red 24V~.
- Supplied complete with self-adhesive gasket for IP66.
> PLATE FOR PANEL CUT-OUTSACCESSORIES
NO 10 654.0100
DOMINO Series 1 25 654.0101
1 25 654.0101Y
2 25 654.0102
BLOCK Series NO 25 654.0100
MBOX Series MBOX2 - MBOX3 NO 25 654.0100
> PLATE FOR PANEL CUT-OUTSACCESSORIES
For enclosure Type
For EUREKA or DOMOseries socket outlets
For EUREKA or DOMOseries socket outlets
For EUREKA series socket outlets
For TOP 22 Seriescomponents
Surface mounting IP66
Surface mounting IP40
FOTO DAFARE
DOMINO Series NO 6 654.0120
OMNIA System 16A 6 654.0125
Mbox Series 32A 6 654.0126
Mbox Series 1 572.0340
For enclosure Type
For OMNIA Series socketoutlets 136x125
Surace mountingIP66
MBOX2-MBOX3-MBOX5
MBOX3-MBOX5
> SAFETY TOROIDAL TRANSFORMERACCESSORIES
BLOCK Series BLOCK 41 654.0205
1 654.0207
DOMINO Series Surface mounting IP661 654.0210
1 654.0220
For enclosure Type D d h l
170 45 25 320
170 39 33 320
170 45 25 270
170 39 38 270
> ZINC-COATED STEEL BACK PLATEACCESSORIES
DOMINO Series Surface M150 16 DIN 275x110 1 654.0700
mounting IP66 M250 (*) 16 DIN 275x180 1 654.0710
190x140 176x126x1,5 1 654.0787
240x190 226x176x1,5 1 654.0788
SCABOX Series 300x220 284x173x1,5 1 654.0789
380x300 358x252x1,5 1 654.0790
452x372 414x318xx1,5 1 654.0791
For enclosure Type Suitable forDimensions
(mm)
(*) Can be mounted in DOMINO 400 and 500 enclosures.- The plate comes with slots for fitting the safety transformer throught
cable ties (item 654.0210 or 654.0220).
> PANEL HOUSINGACCESSORIES
Enclosure for 2 EVOLUTION Series modules70x87 10 570.5052
136x125 6 654.0122
70x87 10 570.5012
136x125 6 654.0121
Description Flange
(*) This insert has been realized with the authority of Bticino spa and itis suitable for “Living International”, “Luna”, “Light” and “LightTech” inserts, whose trademarks are registered with Bticino.Modules snap into place.
Enclosure for 2 modules: “Living International”,“Luna”, “Light”, “Light tech” (*)
l
dD
h
157
1.3Accessories
156
> TURRET FASTENINGACCESSORIES
1 656.0220
1 656.0221
1 656.0222
For enclosure Type
Pole with panel fasteningplates plug for handle seatthreaded blocks andscrews for panel-turretassembly
Optional plate for fixing theturret on cement(equipped with crampsand stud bolts)
Optional rear closure plate in steel
MBOX Series MBOX2
> EMERGENCY PUSH BUTTON KITACCESSORIES
MBOX2 1/10 656.0320
MBOX3 1/10 657.0330
MBOX5 1/10 658.0350
MBOX3 1/10 657.0340
MBOX5 1/10 658.0360
For enclosure Type
MBOX Serieswithout door
MBOX Serieswith door
Emergency push button kit composed of:- illuminated emergency push button- yallow faceplate with seat for emergency push button- neon lamp 230V~- NO contact and NC contact- lamp holder
> CIRCUIT BREAKER KITACCESSORIES
16-32-40A 1/10 657.0331
MBOX3 63-80A 1/10 657.0332
100A 1/10 657.0333
16-32-40A 1/10 658.0351
MBOX5 63-80A 1/10 658.0352
100A 1/10 658.0353
16-32-40A 1/10 657.0341
MBOX3 63-80A 1/10 657.0342
100A 1/10 657.0343
16-32-40A 1/10 658.0361
MBOX5 63-80A 1/10 658.0362
100A 1/10 658.0363
For enclosure Type
MBOX Serieswithout door
MBOX Serieswith door
- Disconnector kit complete with yellow faceplate with handle alreadyinsert suitable for backpanel switches 590.YA... (not provided).
> STANDACCESSORIES
BLOCK Series BLOCK4 1 654.0600
MBOX2 1 656.0120MBOX Series
MBOX3 - MBOX5 1 657.0121
For enclosure Type
> PLATE FOR DIN MODULES CAVITYACCESSORIES
4 mod. DIN 70x55 on opening 25 654.0400
DOMINO Series 1 mod. DIN 17,5x55 on DIN rail 25 654.0410
1/2 mod. DIN 9x55 on DIN rail 25 654.0420
For enclosure
- When put between the modular devices these plates help to dissipateheat.
159
1.3Accessories
158
> APPLIANCE INLETS IP67ACCESSORIES
MBOX3 - MBOX53P+N+E - 63A - 6h 1 654.906397
3P+N+E - 125A - 6h 654.912597
For enclosure Type
MBOX Series
> MODULES BOXESACCESSORIES
Blind 1 572.0320
572.0321
Enclosure for 2 OMNIA Series 572.0322socket outlet 16/32A
For enclosure Type
MBOX Series MBOX 5
Consumer unit 6DIN with 1terminal blockopening
- Dimensions: 136x275.- For cable output, use tear-resistant cable glands fam. 805.
> DEVICE FOR TESTING FUSESACCESSORIES
MBOX2 1 656.0420
MBOX3 1 657.0421
MBOX5 1 658.0422
For enclosure Type
MBOX Series
Fuse-testing kit composed of:- fuse-testing device (654.0010)- facing with seat for fuse-tester and spare fuses
161
1.3Accessories
160
4 10 654.0365
8 10 654.0363
12-24 10 654.0361
16-32-48-64 10 654.0362
DOMINO Series Surfacemounting IP66
> MODULAR TERMINAL BLOCKS - IP20ACCESSORIES
For enclosure Type DIN modules
8 10 654.0361
12-24 10 654.0362
18-36-54 10 654.0364
DOMINO Series Surfacemounting IP40
For enclosure Type DIN modules> TERMINAL BLOCKS FOR DIN RAIL - IP20ACCESSORIES
Vertical 10/100 654.0358
Horizontal 10/100 654.0359
Description
- Phase R-S-T and Earth/neutral terminal blocks.- Terminals: 1x (5x10mm2 e 5x16mm2).
> TERMINAL BLOCKS WITHOUT INSULATED BASE - IP00ACCESSORIES
DOMINO Series Flush 8-12-24-18-36-54mounting IP40
MBOX Series MBOX2 - MBOX310/100 654.0349
BLOCK Series BLOCK 4
For enclosure Type DIN modules
- Earth/neutral terminal blocks- Terminals: 1x (5x10mm2 e 5x16mm2).
- For earth, phase and neutral conductors- Insulated by a plastic cover for the connection of the flexible cables- There is special left:
(*) for one additional terminal block (**) for two additional terminal blocks (***) for three additional terminal blocks.
(*)
(***)
(**)
(*) (**)
8 10 654.0361
12-18-24-36-64 10 654.0362DOMINO Series
Flush mountingIP40
For enclosure Type DIN modules
8
12-18-24-36-64 10 654.0360DOMINO Series
Flush andsurfacemounting IP66and IP40
Additional terminalblock
For enclosure Type DIN modules
(*) (**)