Upload
dangkhue
View
217
Download
0
Embed Size (px)
Citation preview
SUSPENSION SYSTEM
[email protected] Components Group, Inc. (417) 869-6777
v2.1
Series 1 With ACGI Suspension Systems panels can be attached to walls as well as lay into a standard HD T-Grid ceiling mounting system. Panels are available in standard and custom sizes to meet particular design requirements. Perforation options control sound absorption, and acoustic insulation is added behind panels for greater NRC performance. ACGI attaches acoustic fabric to the back of perforated panels to increase acoustical absorption. Special surface patterns and logos can also be incorporated into the manufacture of the panels.
Suspension System Series 1 [SS1] ceiling panels remove easily for post-installation access. Wall panels attach with standard Z-Clips.
Suspension
Main Runner 24" O.C.
Reveal DetailBase Detail
Header DetailZ-Clips
Mounting Surface or Blocking
Base Trim (available in solid wood or veneer)
1⁄8" Reveal
Z-Clip
Architectural Components Group, Inc. (417) 869-6777
v2.0
© 2014 Architectural Components Group, Inc. All Rights Reserved. Information provided is accurate at time of printing. ACGI reserves the right to modify any materials without further notification. All product applications are suggestion only. Always conform with local building codes and safety conditions. ACGI does not accept responsibility for the misuse or improper installation of products. Visit ACGIwood.com for more details. Printed in U.S.A.
LEED CREDITMR 4.1, MR 4.2, MR 7, EQ 4.4
WOOD SPECIESFlat Panels are available in a large variety of wood veneers to meet design requirements.
FINISHESFlat Panels can be finished in any of our standard finish options custom finishes.
FIRE RATINGSolid wood finishes and veneer cores can be provided with a Class A fire rating [ASTM-E84].
DELIVERY, STORAGE & HANDLINGMaterial must be stored and installed only in secured ambient environment (humidity range 25%–55%, temperature not to exceed 86°F). All windows, doors and wet-work must be complete before installation. Handle carefully to avoid damaging.
WARRANTYAll materials supplied by ACGI are guaranteed against manufacturing defects for one year. Wood stains and colorings can vary over time due to job site conditions and are therefore excluded from this warranty. The contractor shall warrant for one year all work from final acceptance of completed work.
Suspension System Series 1 — Specification Information
Product No. Reveal Suspension Width Length Typical Thickness Panel Weight
SS1-####-C (ceiling) N/A 15⁄16 HD T-Grid Up to 2' Up to 8' ¾" 3 lbs/sq. ft.SS1-####-C (wall) N/A Z-Clip Up to 5' Up to 10' ¾" 3 lbs/sq. ft.
How To Spec Perforated Patterns...
What It Means... Suspension System Series 1 24" x 24" panel, ¾" thick, and 8mm
perforations spaced 32mm O.C. vertically and horizontally with parallel alignment.
Parallel Offset
Perforation Size
Series
SS1-2424-C-P832-P
Alignment (Parallel or Offset)
Spacing(Horizontal & Vertical)
Width
Height
¾" PanelThickness
NRC Values
32mm O.C. perforated panel(E 400 mounting) 0.30 (E 400 mounting, 1" acoustical blanket) 0.40
32/16mm O.C. perforated panel(E 400 mounting) 0.55 (E 400 mounting, 1" acoustical blanket) 0.65
16mm O.C. perforated panel(E 400 mounting) 0.70 (E 400 mounting, 1" acoustical blanket) 0.75 (E 400 mounting, 2" acoustical blanket) 0.80
How To Spec Slotted Patterns...
Parallel Offset
NRC Values
(Contact ACGI for details.)
Slot Size
Series
SS1-2424-C-S832-32-O
Alignment (Parallel or Offset)
Spacing(Horizontal & Vertical)
Width
Height
¾" PanelThickness
What It Means... Suspension System Series 1 24" x 24" panel, ¾" thick, and 8mm x 32mm
slots spaced 32mm O.C. vertically and horizontally with offset alignment.
Series
SS1-2424-C-MP.94-P
Alignment (Parallel or Offset)
MicroPerf (0.9mm perforations)
Width
Height
¾" PanelThickness
How To Spec MicroPerf Patterns...
Parallel Offset
NRC Values
0.9mm O.C. perforated panel(E 400 mounting) 0.70 (E 400 mounting, acoustical insulation) 0.85
0.9mm O.C. perforated panel(F-6 wall) 0.45 (F-6 wall, acoustical insulation) 0.80
What It Means... Suspension System Series 1 24" x 24" panel, ¾" thick, and 0.9mm
perforations spaced 4mm O.C. vertically and horizontally with parallel alignment.