SVENSK STANDARD SS-ISO 8864

SVENSK STANDARD

Fastställd/Approved: 1990-10-17Publicerad/Published: 1990-10-17Utgåva/Edition: 1Språk/Language: engelska/EnglishICS: 47.020.90

SS-ISO 8864

Skeppsteknik – Luftbehandling och ventilation i styrhus på fartyg – Förutsättningar och beräkningsgrunder

Shipbuilding – Air-conditioning and ventilation of wheelhouse on board ships – Design conditions and basis of calculations

This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-9312

Standarder får världen att fungeraSIS (Swedish Standards Institute) är en fristående ideell förening med medlemmar från både privat och offentlig sektor. Vi är en del av det europeiska och globala nätverk som utarbetar internationella standarder. Standarder är dokumenterad kunskap utvecklad av framstående aktörer inom industri, näringsliv och samhälle och befrämjar handel över gränser, bidrar till att processer och produkter blir säkrare samt effektiviserar din verksamhet.

Delta och påverkaSom medlem i SIS har du möjlighet att påverka framtida standarder inom ditt område på nationell, europeisk och global nivå. Du får samtidigt tillgång till tidig information om utvecklingen inom din bransch.

Ta del av det färdiga arbetetVi erbjuder våra kunder allt som rör standarder och deras tillämpning. Hos oss kan du köpa alla publikationer du behöver – allt från enskilda standarder, tekniska rapporter och standard-paket till handböcker och onlinetjänster. Genom vår webbtjänst e-nav får du tillgång till ett lättnavigerat bibliotek där alla standarder som är aktuella för ditt företag finns tillgängliga. Standarder och handböcker är källor till kunskap. Vi säljer dem.

Utveckla din kompetens och lyckas bättre i ditt arbeteHos SIS kan du gå öppna eller företagsinterna utbildningar kring innehåll och tillämpning av standarder. Genom vår närhet till den internationella utvecklingen och ISO får du rätt kunskap i rätt tid, direkt från källan. Med vår kunskap om standarders möjligheter hjälper vi våra kunder att skapa verklig nytta och lönsamhet i sina verksamheter.

Vill du veta mer om SIS eller hur standarder kan effektivisera din verksamhet är du välkommen in på www.sis.se eller ta kontakt med oss på tel 08-555 523 00.

Standards make the world go roundSIS (Swedish Standards Institute) is an independent non-profit organisation with members from both the private and public sectors. We are part of the European and global network that draws up international standards. Standards consist of documented knowledge developed by prominent actors within the industry, business world and society. They promote cross-border trade, they help to make processes and products safer and they streamline your organisation.

Take part and have influenceAs a member of SIS you will have the possibility to participate in standardization activities on national, European and global level. The membership in SIS will give you the opportunity to influence future standards and gain access to early stage information about developments within your field.

Get to know the finished workWe offer our customers everything in connection with standards and their application. You can purchase all the publications you need from us - everything from individual standards, technical reports and standard packages through to manuals and online services. Our web service e-nav gives you access to an easy-to-navigate library where all standards that are relevant to your company are available. Standards and manuals are sources of knowledge. We sell them.

Increase understanding and improve perceptionWith SIS you can undergo either shared or in-house training in the content and application of standards. Thanks to our proximity to international development and ISO you receive the right knowledge at the right time, direct from the source. With our knowledge about the potential of standards, we assist our customers in creating tangible benefit and profitability in their organisations.

If you want to know more about SIS, or how standards can streamline your organisation, please visit www.sis.se or contact us on phone +46 (0)8-555 523 00


© Copyright/Upphovsrätten till denna produkt tillhör SIS, Swedish Standards Institute, Stockholm, Sverige. Använd-ningen av denna produkt regleras av slutanvändarlicensen som återfinns i denna produkt, se standardens sista sidor.

© Copyright SIS, Swedish Standards Institute, Stockholm, Sweden. All rights reserved. The use of this product is governed by the end-user licence for this product. You will find the licence in the end of this document.

Upplysningar om sakinnehållet i standarden lämnas av SIS, Swedish Standards Institute, telefon 08-555 520 00. Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard.

Information about the content of the standard is available from the Swedish Standards Institute (SIS), telephone +46 8 555 520 00. Standards may be ordered from SIS Förlag AB, who can also provide general information about Swedish and foreign standards.

Den internationella standarden ISO 8864:1987 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av ISO 8864:1987.

The International Standard ISO 8864:1987 has the status of a Swedish Standard. This document contains the official English version of ISO 8864:1987.

Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på www.sis.se - där hittar du mer information.


Foreword

IS0 (the International Organization for Standardization) is a worldwide federation of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the IS0 Council. They are approved in accordance with IS0 procedures requiring at least 75 % approval by the member bodies voting.

International Standard IS0 8864 was prepared by Technical Committee ISO/TC 8, Shipbuilding and marine structures.

Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated.

SS-ISO 8864 (E)This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-9312

INTERNATIONAL STANDARD IS0 8864: 1987 (E)

Air-conditioning and ventilation of wheelhouse on board ships - Design conditions and basis of calculations

0 Introduction

This International Standard is fundamentally based on IS0 7547, which is required to apply this International Standard.

1 Scope and field of application

This International Standard specifies design conditions and suitable methods of calculation for air-conditioning and ventilation of the wheelhouse on board seagoing merchant ships for all conditions except those encountered in extremely cold or hot climates (i.e. with a lower or higher enthalpy than that stated in 4.1).

It applies to a wheelhouse supplied with air-conditioning and ventilation either by the general accommodation system or by its own individual system.

4 Design conditions

4.1 General

The system shall be designed for the indoor air conditions at the stated outdoor air conditions, etc. specified in subclauses 4.1, 4.2 and 4.3 of IS0 7547.

NOTE - The conditions are applicable only when the doors and win- dows are closed and the climatic situation in the room stable.

While the system is designed for these stated conditions, normal use of the vessel will seldom allow them to be fully met.

4.2 Occupancy

The number of persons to be allowed for in the wheelhouse shall be 5.

The annex provides guidance and details of good practice in the design of ventilation and air-conditioning systems for the wheelhouse in ships.

5 Calculation of heat gains and losses NOTE - Users of this International Standard should note that, while observing the requirements of the Standard, they should at the same time ensure compliance with such statutory requirements, rules and regulations as may be applicable to the individual ship concerned.

2 References

IS 0 7547, Air-conditioning and ventilation of accommodation spaces on board ships - Design conditions and basis of calculations.

IEC Publication 92, Electrical installations in ships -

Part 107 : Definitions and general requirements.

Part 504 : Special features - Control and instrumentation.

3 Definitions

For the purposes of this International Standard, the definition given below, together with those in IS0 7547, apply :

wheelhouse : Enclosed area of the bridge (excluding radio cabin).

5.1 Applicability

For the calculation of summer conditions, subclauses 5.2 and 5.3 of IS0 7547 shall apply except as modified below. For the calculation of winter conditions, subclause 5.2 of IS0 7547 shall apply.

NOTES

1 Any required additional heating during winter is assumed to be carried out by separate means of heating, other than by air supply, unless otherwise specified by the purchaser.

2 The external sides and top of the wheelhouse are assumed to have light-coloured surfaces unless otherwise stated by the purchaser.

3 The maximum value for the total heat transfer coefficient, k, for the wheelhouse roof shall be taken as 0,5 W/(m2.K). For other surfaces, reference is made to table 2 in IS0 7547.

5.2 Heat gain from persons

Values of sensible and latent heat emitted by a person shall be in accordance with subclause 5.4 in IS0 7547 (Activity : seated at rest).

1


5.3 Heat gain from lighting and other sources

Heat gain from lighting shall be ignored.

Heat gain from apparatus and equipment shall be based on the input of the equipment during operation.

The purchaser shall give information about the maximum simultaneous and continuous heat gain in kilowatts from each group of electrical equipment and the location of this equipment.

Where the heat gain from the equipment during operation is not specified by the purchaser, it shall be taken as 2 kW.

NOTE - It is assumed that the electrical equipment is designed according to IEC Publications 92-101 and 92-504 as regards environmen- tal conditions (temperature, humidity, etc. 1.

6 Airflow calculation

6.1 Volume of space

Volume of consoles, chart-table, furniture, stationary equip-

ment, etc. shall not be deducted in calculating the gross volume of the wheelhouse.

6.2 Supply airflow

The air supply to the wheelhouse shall be calculated using whichever of the following criteria gives the highest value :

a) airflow to maintain the conditions of 4.1;

b) outdoor supply airflow not less than 0,008 m3/s per person.

6.3 Temperature of supply airflow

Wherever relevant, subclause 6.3 in IS0 7547 shall apply.

6.4 Air balance

The system shall provide a positive pressure in the room.

Annex

Guidance and good practice (This annex does not form an integral part of the Standard.)

Guidance and good practice according to annex A of IS0 7547 is recommended to be applicable wherever relevant.

NOTE - The wheelhouse is regarded as “Control station” according to Chapter II-2 in the International Convention for the Safety of Life at Sea (SOLAS 1974) as amended, which shall be taken into consideration when designing the system.


Documents

SVENSK STANDARD SS-ISO 8864