Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
• Case : polyamide• Plunger : polyamide• Bushing : brass, nickel plated• Contacts :
A : silver C : copper, silver plated
APEM products may be recycled at end-of-life for the re-claiming of valuable metal components.
MATERIALS
• Torque : 1.50 Nm (1.10 Ft.lb) max. applied to nut• Panel thickness : 5 mm (.196) max.• Total travel :
NO : 4.5 mm (.177) ± 0.3 (.011) NC : 3.5 mm (.137) ± 0.3 (.011)
• Operating temperature : -20 °C to +55 °C (-4 °F to +131 °F)
GENERAL SPECIFICATIONS
• Max. current/voltage rating with resistive load : - silver contacts (A) : 4 A 250 VAC - 8 A 125 VAC - 4 A 24 VDC - 8 A 12 VDC - silver plated copper contacts (C) : 2 A 250 VAC - 3 A 125 VAC - 2 A 24 VDC - 3 A 12 VDC
• Initial contact resistance : 10 mΩ• Insulation resistance : 1,000 MΩ min. at 500 VDC• Dielectric strength :
2,000 Vrms 50 Hz min. between terminals 3,000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 10,000 cycles at full load
ELECTRICAL SPECIFICATIONS
Butt action contactsDouble breakNF (EN 61058-1), UL and CSA approved
DISTINCTIVE FEATURES
1200 seriesMomentary pushbutton switches •
round plunger
The company reserves the right to change specifications without notice.
PAN
EL S
WIT
CH
ES
1
SW-12
00-18
08
MOUNTING
• Panel cut-out : Ø 12.2 (.480)
2 A 250 VAC or 4 A 250 VAC, T55/125 °CAll models
4 A 250 VAC - 8 A 125 VACAll models function 3 (NO)
EN 61058-1
Models 1233X209 and 1233X209L are standard marked NF. To order switches marked NF, UL or CSA, complete appropriate box of ordering format.
AGENCY APPROVALS
Momentary pushbutton switches • round plunger
1200 series
TERMINALS
ELECTRICAL FUNCTIONS
KEYWAY
NO (function 3) NC (function 2)
9.20
6.35x0.80
(.362
)
(.25x.031)
(.122DIA)Ø3.10
4.50
(.177
)
9.20
6.35x0.80
(.362
)
(.25x.031)
(.059DIA)Ø.50
4.50
(.177
) (.25)6.35
9.20
0.80
Ø3.00x0.50 (.118DIAx0.50)
(.031)
(.362
)(.2
83)
(.031)
(.118DIAx0.50)Ø3.00x0.50
0.80
7.20
6.35(.25)
Solderlug / quick-connect.
Normalized quick-connect
Screw
Screw + clamp
PAN
EL S
WIT
CH
ES
2
BASIC PART NUMBER
SERIES
12
2 Normally closed
3 Normally open
ELECTRICAL FUNCTIONS
1 Solder lug and quick-connect
2 Screw
3 Normalized quick-connect
0 Screw terminal + clamp
0.-7 Right angle screw terminals+ clamp
TERMINALS
BUILD YOUR PART NUMBER
1200 seriesMomentary pushbutton switches •
round plunger
OPTIONS
A Silver
C Copper, silver plated
CONTACT MATERIALS
X209 NF standard marked,silver contacts
X209LNF standard marked,silver contacts, long plunger
SPECIAL MODELS
2 Black
3 Green
6 Red
7/1 White
PLUNGER COLORS
FINISH
LUXEChrome plated capnut U117 instead ofknurled cap nut U411
APPROVALS
NFUL/CSA
Consult factory for detailsof approved models.
ABOUT THIS SERIES
Notice : please note that not all combinations of above numbers are available. Refer to following pages for further information.
Sealing boots are available to protect the switches against dust and water. See "Sealing Boots" section of website.
Mounting accessories : standard hardware supplied : - silver contact models : 1 hex nut U166 and 1 knurled nut U411 - copper contact models : 1 hex nut U42 and 1 knurled nut U411 Standard and special hardware is presented in the “Hardware“ section of website.
On the following pages, you will find successively basic part numbers of switches and options in the same order as in above chart.
PAN
EL S
WIT
CH
ES
3
10.5
012
.00
(.413
)(.4
72)
(.315
)8.
00
14.00(.551)
17.00(.519)(.669)13.20
Ø12.00x0.75 SI (.472DIAx0.75 IS)
(.295
)7.
50
(.315DIA)Ø8.00
1.00
(.039
)
SCREW TERMINALS
NORMALIZED QUICK-CONNECT TERMINALS
STRAIGHT SCREW TERMINALS + CLAMP
(.669)17.00
7.50
(.295
)
(.472DIAx0.75 IS)ø12.00x0.75 SI
6.35x0.80(.519)(.25x0.031)
(.551)14.00
13.20
(.039
)1.
00
(.472
)12
.00
(.362
)9.
20(.4
13)
10.5
0
ø8.00(.315DIA)
(.059DIA)ø1.50
(.472DIAx0.75 IS)Ø12.00x0.75 SI
(.551)14.00
(.315DIA)Ø8.00
(.472
)(.4
13)
12.0
010
.50
(.519)
(.669)
13.20
17.00
(.25x.031)6.35x0.80
(.283
)7.
20
(.295
)7.
50(.0
39)
1.00
Plunger height : NO model : 7.50 mm, NC model : 5.80 mm
Plunger height : NO model : 7.50 mm, NC model : 5.80 mm
Plunger height : NO model : 7.50 mm, NC model : 5.80 mm
Plunger height : NO model : 7.50 mm, NC model : 5.80 mm
SOLDER LUG/QUICK-CONNECT TERMINALS
(.362
)(.4
72)
(.413
)
(.25x0.031)
13.20
(.551)
(.669)
(.472DIAx0.75 IS)
9.20
12.0
010
.50
14.00
6.35x0.80(.519)17.00
Ø12.00x0.75 SI
7.50
(.295
)
(.039
)1.
00
Ø8.00(.315DIA)
Momentary pushbutton switches • round plunger
1200 series
KEYWAY
KEYWAY
KEYWAY
KEYWAY
Normally Closed
Normally Open
1212
1213
Normally Closed
Normally Open
1222
1223
Normally Closed
Normally Open
1232
1233
Normally Closed
Normally Open
1202
1203
PAN
EL S
WIT
CH
ES
4
1200 seriesMomentary pushbutton switches •
round plunger
RIGHT ANGLE SCREW TERMINALS + CLAMP KEYWAY
Normally Open1203-7
Ø12.00x0.75 SI(.472DIAx0.75 IS)
7.00
(.275
)
6.35x0.80(.25x.031)
10.5
012
.00
(.413
)(.4
72)
Ø8.00(.315DIA)
14.00(.551)
7.50
(.295
)
(.826)
90˚
21.00
1.00
(.039
)
CONTACT MATERIALS
BASIC P/N
A SilverC Copper, silver plated
FINISH
BASIC P/N
LUXE Chrome plated cap nut U117 instead of knurled nut U411
PLUNGER COLORS
BASIC P/N
2 Black3 Green6 Red7/1 White
SPECIAL MODELS
BASIC P/N
X209 NF standard marked - Silver contacts - short plunger X209L NF standard marked - Silver contacts - long plungerSee drawings next page.
NOTE : Ground connector U187 compulsory on models X209 and X209L if the panel is not metallic or not connectedto ground. Order separately : see “Hardware“ section of website.
PAN
EL S
WIT
CH
ES
5
SPECIAL MODELS(CONTINUED)
BASIC P/N
Momentary pushbutton switches • round plunger
1200 series
Replace • with the desired plunger color.
Replace • with the desired plunger color.
KEYWAY
KEYWAY
Normally Open1233A•X209
OPTION X209
OPTION X209L
Normally Open1233A•X209L
10.5
012
.00
9.20
(.413
)(.4
72)
(.362
)
Ø8.00(.315DIA)
6.35x0.80
14.00(.551)
(.25x0.031)(.519)13.20
17.00(.669)
Ø12.00x0.75 SI(.472DIAx0.75 IS)
(.295
)7.
50(.0
39)
1.00
(.511
)13
.00
(.25x0.031)6.35x0.80
9.20
(.362
)10
.50
12.0
0(.4
13)
(.472
)
Ø12.00x0.75 SI(.472DIAx0.75 IS)
14.00(.551)
(.519)13.20
17.00(.669)
Ø8.00(.315DIA)
1.00
(.039
)
AGENCY APPROVALS
BASIC P/N
NF All modelsUL-CSA All models function 3 (NO), including X209 and X209L
Marking : to order switches marked NF, UL or CSA, complete above box with desired approvals.
PAN
EL S
WIT
CH
ES
6