Externally threaded

Connections*

*For specific dimensions, or information about other types of connections, please contact your SWEP sales representative.

Size Height of plate pack Total weight

SC S 25+(2,49×NoP) mm 55,8+(1,224×NoP) kg

0.984+(0.098×NoP) in 123.1+(2.698×NoP) lb

SC M 61,38+(2,39×NoP) mm 80,3+(1,224×NoP) kg

2.417+(0.094×NoP) in 177.1+(2.698×NoP) lb

SC L 10+(2,49×NoP) mm 27,4+(1,224×NoP) kg

0.394+(0.098×NoP) in 60.5+(2.698×NoP) lb

SC Y 16+(2,49×NoP) mm 38,4+(1,224×NoP) kg

0.63+(0.098×NoP) in 84.7+(2.698×NoP) lb

Materials Channel plate Brazing

SC Stainless steel Copper

SWEP A is our AHRI Certified® range of Brazed Plate Heat Exchangers. If you are looking for the additional security of third-party verified performance for your HVAC systems, this is the choice.

The AB633 is a high flow capacity BPHE, suitable for a diversity of demanding applications, such as condenser and evaporator in power generation, engine oil cooler, steam condenser, heat recovery in chillers, or for specific district heating installations. The product offers PHE-like capacities at high temperature and pressure, without the wear and tear of parts. Up to 95% of the material in BPHEs is used to transfer heat, as opposed to other technologies that use much of their material for support equipment, shell, or frames. You will benefit from savings on energy consumption, spare parts, space, transportation and installation.

SWEP AB633 – AHRI Certified®

Pressure classesL Low. Y Intermediate, evaluated per EN 13345.S Standard, evaluated per EN 13345.M Medium, evaluated per EN 13345.

Max number of plates (NoP) Port size F1/P1 Port size F2/P2 Port size F3/P3 Port size F4/P4 Max volume flow Channel volume (SI) Channel volume (US)

www.swep.net

CH

ALL

EN

GE

EFF

ICIE

NC

Y

F1 F2

F3 F4

830 (

32.68

)

593 (

23.35

)

537 (21.14)

300 (11.81)

280-348 150 mm (5.906 in) 150 mm (5.906 in) 150 mm (5.906 in) 150 mm (5.906 in) 275,5 m³/h (1200 gpm)

0,86-0,93 dm3

0.03037-0.03284 ft3

Third party approvalsSWEP BPHEs are generally approved by listed below certifi cation organizations:Europe, Pressure Equipment Directive (PED)America, Underwriters Laboratories Inc (UL)Japan, Kouatsu-Gas Hoan Kyoukai (KHK)Additionally SWEP holds approvals from a vast variety of other certifi cation organizations. For approval information regarding a specifi c product please contact your local SWEP representative. SWEP reserves the right to make changes without prior notice.

The BPHE conceptThe Brazed Plate Heat Exchanger (BPHE) is constructed as a plate package of corrugated channel plates with a fi ller material between each plate. During the vacuumbrazing process, the fi ller material forms a brazed joint at every contact point between the plates, creating complex channels. The BPHE allows media at different temperatures to come into close proximity, separated only by channel plates that enable heat from one media to be transferred to the other with very high effi ciency. The concept is similar to other plate and frame technology, but without the gaskets and frame parts.

Cover platePlate package

Connections

Cover plateChannel plates

Zero hole channel plate

SSP calculation softwareWith SWEP’s unique SSP, the SWEP Software Package, you can do advanced heat transfer calculations yourself, and choose the product solution that suits your application best. It’s also easy to choose connections and generate drawings of the complete product. If you would like advice, or you would like to discuss different product solutions, SWEP offers all the service and support your need.

Material disclaimerThe information and recommendations in regards to the products are presented in good faith, however, SWEP makes no representations or warranties as to the completeness or accuracy of the information. Information is supplied upon the condition that the purchasers will make their own determination as to the products’ suitability for their purposes prior to use. Purchasers should note that the properties of the products are both application and material selection dependent and that products containing stainless steel are still subject to corrosion if used in unsuitable environments.

PED

ASME

KHK

15

20

25

30

35

-40 150

(bar)

(°C)

ASME

S Pressure Y Pressure

215265315365415465

(PSI)

5

10

15

20

25

30

35

-196 20 50 100 135 150 175 200 225

(bar)

(°C)

PEDS, M PressureY PressureL Pressure

70120170220270320370420470

(PSI)

-320.8 68 122 212 275 302 347 392 437 (°F)

10

15

20

25

30

35

-160 175

(bar)

(°C)

KHK

150200250300350400450500

(PSI)

-256 347 (°F)

S Pressure Y Pressure

15

20

25

30

35

-40 150

(bar)

(°C)

ASME

S Pressure Y Pressure

215265315365415465

(PSI)

5

10

15

20

25

30

35

-196 20 50 100 135 150 175 200 225

(bar)

(°C)

PEDS, M PressureY PressureL Pressure

70120170220270320370420470

(PSI)

-320.8 68 122 212 275 302 347 392 437 (°F)

10

15

20

25

30

35

-160 175

(bar)

(°C)

KHK

150200250300350400450500

(PSI)

-256 347 (°F)

S Pressure Y Pressure

15

20

25

30

35

-40 150

(bar)

(°C)

ASME

S Pressure Y Pressure

215265315365415465

(PSI)

5

10

15

20

25

30

35

-196 20 50 100 135 150 175 200 225

(bar)

(°C)

PEDS, M PressureY PressureL Pressure

70120170220270320370420470

(PSI)

-320.8 68 122 212 275 302 347 392 437 (°F)

10

15

20

25

30

35

-160 175

(bar)

(°C)

KHK

150200250300350400450500

(PSI)

-256 347 (°F)

S Pressure Y Pressure

SWEP AB633 – AHRI Certified®

www.swep.net

CH

ALL

EN

GE

EFF

ICIE

NC

Y