Upload
knox
View
55
Download
2
Tags:
Embed Size (px)
DESCRIPTION
SXBlue II GPS. CHAPTER – I ABOUT HARDWARE AND SOFTWARE. www.geneq.com. Parts of SXBlue II. One SXBlue II GPS Receiver with battery pack One Precision Antenna One Antenna cable One RS-232 cable One USB cable One Li-Ion Battery Charger One Nylon Carrying Case - PowerPoint PPT Presentation
Citation preview
SXBlue II GPS
www.geneq.com
CHAPTER – IABOUT HARDWARE AND SOFTWARE
Parts of SXBlue II
• One SXBlue II GPS Receiver with battery pack• One Precision Antenna• One Antenna cable• One RS-232 cable• One USB cable• One Li-Ion Battery Charger• One Nylon Carrying Case• One CD-ROM containing manuals, utilities
(pocket max,PC-max,Active Sync.,Rinex converter tool), configuration files, etc
SXBlue II Receiver
BatteryPack
Charger Jack
Parts of SX Blue II GPS:-
GPS LED Indicators
ON/OFF Button
Battery GaugeIndicator
Battery GaugeButton
RS-232 Port USB Port GPS AntennaConnector
Precision Antenna
•The Precision Antenna supplied with the SXBlue II GPS has been designed to provide reliable, stable and consistent sub-meter positioning.
• Red Power indicator – when the SXBlue II GPS is powered, this LED will illuminate. When battery is low, the Power indicator will start blinking for 20 minutes prior to auto shut-down.
• Green GPS Lock indicator – once the SXBlue II GPS achieves a solid GPS lock, this LED will remain illuminated. If this LED continues to blink, it could be an indication of a receiver hardware failure.
• Orange DGPS Position indicator – this LED will illuminate when the receiver has achieved a differential position and not relevant to us now.
• Yellow Differential lock indicator – this indicator will illuminate continuously when the SXBlue II GPS has achieved a solid SBAS lock and this is not relevant now.
• Blue Bluetooth indicator – this LED will illuminate when there is a Bluetooth connection between the SXBlue II GPS and a Bluetooth compatible device and off when there is no Bluetooth connection.
The soft ware used are:• Active sync. :--(initially to be installed in to PC). It acts
as ‘bridge’ between PC and any PDA.• Now we can access PDA with the help of PC.
• Loading of Pocket max 2.2.0 (pda version):-- Place Pocket max software in to PDA devise and run it.
Configuring Bluetooth Communication
• The two major steps are: discovering a Bluetooth device and assigning a communication port number to the discovered device.
• The data collection software will then call the assigned port number to receive the data from the SXBlue II GPS.
CHAPTER – IICONFIGURING DGPS WITH PDA
CHAPTER – IIICOLLECTION OF RAW
DATA (STATIC/KINEMATIC)
Just click on the pocket max in PDA the following pages will be displayed for the collection of data in static mode and in kinematic mode
Go to setup
Keep 1st,3rd,5th,7th,8th &9th fields as 1hz
Go to ‘LOGS’ -----Raw data
Keep Bin95 and 96 as 1 Hz