Sykes-Pickavant Q2 - April - June 2015 Promo Brochure

NEW PRODUCTS & SPECIAL OFFERS

www.sykes-pickavant.com

APRIL - JUNE 2015

Specialist Tool Solutions

90201300

31370000

1/2” Impact Wrench - Ultra ShortPowerful short body specifically designed for use in confined spaces

Combined Petrol & Diesel Cylinder Leakage TesterHelps to diagnose worn / broken piston rings, burnt / leaking valves and faulty head gaskets

SEE PAGE 8 FOR FURTHER DETAILS SEE PAGE 10 FOR FURTHER DETAILS

NEW NEWUP TO 680Nm

NEW DESIGNCONCEPT

53403500Fortron InjectorMax MachineA simple & effective method of cleaning fuel systems without the removal of injectors from the vehicle

SEE BACK PAGE FOR FURTHER DETAILS

SUITABLE FORPETROL &

DIESEL ENGINES

NEW

03490000Speedyvac Brake Bleeder KitNew compact size allows for easy operation

SEE PAGE 20 FOR FURTHER DETAILS

NEW NEWDESIGN

KEYFOR USE WITH UNIVERSAL PRESS FRAME (18700100)

FOR USE WITH PRESS FRAME PRESSURE SCREW (18704100)

FOR USE WITH SP 12T HYDRAULIC RAM (18000000)

FOR USE WITH WORKSHOP PRESS See page 15

FOR USE WITH AIR TOOLSSee page 8

LCV SUSPENSION LCV SUSPENSION

Ford Transit Lower Arm Bush Tool• For the removal and replacement of the large rear bush on the lower arms of Ford Transits from 2000 – 2013 • Designed to be used with a 187000V2 press frame and ram • On vehicle solution with minimal strip down• Can also be used in a workshop press for lower arms when they have been removed from the vehicle• Applications: Ford Transit Mk5 & Mk6 from 2000 to 2013• OE Bush Numbers covered: 4042024, 4372132, 4540787 & 7372131

08269000 NEW

£99.00

Scan the QR code to watch an

overview video of the Ford Transit Bearing Press Kit

Ford Transit Bearing Press KitSuccessful removal of troublesome inner bearing race and reinstallation of complete bearing assembly • For the removal and installation of the front wheel bearing on Ford Transits 2000-2013 with the aid of a workshop press• Removes and installs bearings on both 5 and 6 stud hubs• Removes the inner and outer bearing race

£199.00MADE IN THE UK

MADE IN THE UK

MADE IN THE UK

MADE IN THE UK

MADE IN THE UK

08756000

Ford Transit Hub & Front Wheel Bearing Remover KitUpdated slide hammer kit now includes larger hub plate and extra-long pillars to enable removal of hubs and front wheel bearings on six stud Transits• For Ford Transit Mk6 & Mk7 Hub and complete front wheel bearing removal• Features a heavy duty slide hammer which operates in two directions to achieve multiple operations in one tool• Provides three different solutions in one kit: - Can be used as a traditional hub puller - Remove the stubborn inner bearing race - Use the slide hammer in the reverse direction to remove the outer bearing race

£379.95

UPDATED KIT

3 IN 1 TOOL

Hub RemovalInner BearingRace Removal

Outer Bearing Race Removal

082545V2

Ford Transit Press Upgrade Kit• Set of tools to enable the original Transit Bearing Kit (08254500) and the 082545V2 kit (above) to be used in a workshop press • Suitable for use on Transits ‘00-’13• Removes and installs bearings on both 5 and 6 stud hubs• Removes the inner & outer bearing race

08255000 08255500

£99.95 £76.95

Ford Transit Hub & Front Wheel Bearing Remover - Upgrade Kit• Includes larger hub plate and extra-long pillars enabling owners of the original Transit Bearing Kit (08254500) to remove hubs and front wheel bearings on six stud Transits

Tel: 01543 679900 www.sykes-pickavant.com

1

Mercedes Sprinter Ball Joint Tool including Press Frame & 12 Tonne Hydraulic Ram• For the removal and installation of ball joints on Mercedes Sprinter ‘95 -’06 and revised ‘06 onwards models (901, 902, 903, 904 and 906)• Includes 187304V2 Adaptor Set (right) and Press Frame with 12 Tonne Hydraulic Ram• Adaptor set can be used in a workshop press• Applications: - Sprinter ‘95 onwards - VW LT ‘96 - ‘06 - VW Crafter & Sprinter ‘06 onwards

£399.00

NEW

NEW


LCV SUSPENSION

COME & SEE US AT THE CV SHOW - NEC - 14-16 APRIL - STAND 4F31

Ford Transit Ball Joint Tool• For the removal & installation of the lower front ball joints as found on Ford Transits 2000-2013• On vehicle solution provides time saving benefits• Tool designed to access the awkward location of the ball joint• Manual option includes screw converter allowing the user to utilise an existing SP hydraulic ram• Hydraulic option includes 12 Tonne SP hydraulic ram

ON VEHICLESOLUTION

Part No. Description Price

08256000 Manual Option £172.50

18256000 Hydraulic Option £249.00

*Note - Hydraulic ram included in 18256000 only

Scan the QR code to watch a video of the Ford Transit Ball Joint Tool - Hydraulic

Version

£399.00

Opel Movano / Renault Master / Nissan Interstar Ball Joint Tool Kit• For the removal and installation of upper and lower ball joints as fitted to the following: - Nissan Interstar ‘02 onwards - Opel Movano ‘98 onwards - Renault Master II ‘98 onwards • Enables work to be carried out on the vehicle

Opel Movano / Renault Master / Nissan Interstar Ball Joint Adaptor Set - UPPER Ball Joint• Adaptor set from main kit (187512V3 - left) for use on upper ball joints

Opel Movano / Renault Master / Nissan Interstar Ball Joint Adaptor Set - LOWER Ball Joint• Adaptor set from main kit (187512V3 - left) for use on lower ball joints

£99.00

£99.00

£159.00

187512V3187502V3

187503V3

UPDATED KIT

2

Mercedes Sprinter Ball Joint Adaptor Set• Adaptor set only from 187413V2 - see left• Set can be used with either Universal Press Frame & Ram (187000V2) or a workshop press• Enables work to be carried out on the vehicle

187413V2 12735000

187403V2

OFFER £79.00SAVE £15.90

LIST PRICE £94.90

MADE IN THE UK

MADE IN THE UK

Impact Force Screw & Shock Handle • Heavy duty force screw with impact handle included, where shock action is required• Can be used as an alternative option in place of 8 and 12 tonne rams as used on SP Pullers and Press Frames

COME & SEE US AT MECHANEX - EVENT CITY - MANCHESTER - 19-20 MAY - STAND F21

COOLING

NEW

LAND ROVER

33145500

NEW

Universal Combustion Leakage Tester • Quick test combustion leakage tester• 25 to 50mm cone• Fast and accurate diagnosis of cylinder head gasket leaks• Suitable for use with both petrol & diesel engines• Supplied with standard and sensitive reaction test fluid (250ml)

NEW

£129.95

33165000Speedfiller• For replacing the coolant after opening or draining the system• Eliminates airlocks during refilling through the use of vacuum• Unique multi-fit cone for universal use• Also capable of connecting directly onto quick release cooling caps from 315, 316 and 317 Series kits using adaptor piece

03195000HGV Airline Adaptor & Pressure Gauge Assembly• To be used on larger cooling systems i.e HGV to speed up the pressurisation process using a tyre inflater• Includes pressure relief valve to prevent over-pressurisation• 30psi / 2 bar gauge• For use with 33140000 and 331400V2 cap adaptors

£149.95

331400V2XL Cooling System Pressure Test KitUpdated kit now includes additional caps covering more: DAF, Renault, Caterpillar, Optare, MAN, Dart, Komatsu, JCB, Volvo construction and Agricultural vehicles• Contents: - 10 x Reservoir & Radiator Pressure Caps - High capacity metal bodied hand pump - Quick-Connect Hose Assembly • Dual Gauge measures both p.s.i (0-35) and bar (0-2.5) • Additional Pressure Caps available - refer to applications guide • Applications include: DAF / Iveco / MAN / Mercedes / Renault / Scania / Volvo plus wide ranging coverage for Plant / Construction / Military & Agricultural solutions

£299.95

NEW UPDATED KIT 331595V2

OFFER £235.00SAVE £54.95

LIST PRICE £289.95

‘315’ Series Cooling System Test Kit• All components of the ‘315’ range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors. For older systems with a threaded connection, adaptor 03186870 is available • Contents: - Hand Pump with Pressure Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded Cooling System Cap Adaptors - 3 x Bayonet Fitting Cooling System Cap Adaptors / 1 x Cap Adaptor wrench

Comprehensive applications listing provided with each kit


3

33145000

£84.95£99.95

NEW

Scan the QR code to view an

applications list

XL Combustion Leakage Tester• Fast and accurate diagnosis of cylinder head gasket leaks on HGV, commercial and plant engines• Quick connector for use with 33140000 and 331400V2 cap adaptors (see below)• Suitable for use with both petrol & diesel engines• Supplied with standard and sensitive reaction test fluid (250ml)

£199.95

£139.95

LAND ROVER

MADE IN THE UK

MADE IN THE UKMADE IN THE UK

‘315’ Series Cooling System Test Kit• All components of the ‘315’ range are fully compatible with older SP Cooling System Kits and can be used to upgrade previous generations of Cooling System Pressure Test Kits which are fitted with quick-release connectors. For older systems with a threaded connection, adaptor 03186870 is available • Contents: - Hand Pump with Pressure Gauge & Quick-Release fitting - Hose Assembly c/w quick-release fitting - 16 x Threaded Cooling System Cap Adaptors - 3 x Bayonet Fitting Cooling System Cap Adaptors / 1 x Cap Adaptor wrench

Land Rover Discovery 3 & 4 Suspension Bush Master Kit A comprehensive solution specifically designed for removal of seized / corroded bushes and installation of replacement bushes for Land Rover Discovery 3/4 and Range Rover Sport models • Available kits are as follows: - Master Kit - Front lower - Front upper - Rear lower - Rear upper • Only the bushes have to be replaced, saving the cost and time in replacing the complete arm• Lower arm bushes can be replaced on vehicle without having to remove the wheel• Individual press frame pieces for each wishbone • To be used in conjunction with the SP Universal Press Frame (18700100) and due to the nature of corroded components, the power of the SP 12 Tonne Hydraulic Ram is also required (18000000) (Can be purchased together as 187000V2 - Universal Press Frame c/w 12 Tonne Hydraulic Ram) • The SP 90206000 Vibro Impact Air Hammer and SP 96020000 Induction Heater can be used to assist in the removal of corroded suspension bolts and bushes - See QR code

18777000

Watch a video showing

removal of the lower

front arm bush

Watch a video showing

installation of the lower

front arm bush

£649.00

Part No. Description Image Price

18777100 Land Rover Discovery 3 & 4 Front Lower Kit £259.00

18777200 Land Rover Discovery 3 & 4 Front Upper Kit £169.00

18777300 Land Rover Discovery 3 & 4 Rear Lower Kit £199.00

18777400 Land Rover Discovery 3 & 4 Rear Upper Kit £169.00

Other available options

Land Rover Viscous Fan Tool Set• Use both tools together to replace the cooling fan on Land Rover Discovery 3, Range Rover 3 and Range Rover Sport models (V6 engines only)• Extra long (650mm), thin design for easier working in confined spaces

Land Rover Swivel Ball Joint Adaptor Set• New “on vehicle” solution for the removal and replacement of twin swivel ball joints as fitted onto the front axles of two popular Land Rover models: Discovery 2 ‘98 – ‘04 and Range Rover P38A ‘94 – ‘02• Uses the Sykes-Pickavant 187 Hydraulic Series press frame to deliver 12 tonnes of force, for a “take the press to the vehicle” solution (Inc in 18771100 only)

Land Rover Bush Adaptor Set• For the efficient removal & refitting of bushes on traditional LR models• Dedicated shaped press pieces for correct location / alignment• For radius arm, panhard bushes & general suspension bushes • Suitable for: Defender, Discovery 1 & 2, Classic Range Rover, Range Rover P38A & older Series Land Rovers• Includes 6 adaptor pieces for use in a workshop press with suspension parts removed from vehicle - Can be used with a press frame or C Clamp N.B Requires 18775100 step plate

Land Rover Bush Kit Press Frame Option• Kit includes 6 piece adaptor set (as above), multi-application step plate (18775100), press frame, adaptor ring and 12 tonne hydraulic ram

03125000

18771000 18775000

£59.95

£429.95

18775500

*Note - With certain large radius arm bushes, the adaptor pieces can still be used with a workshop press or C Clamp

4KEYFOR USE WITH UNIVERSAL PRESS FRAME (18700100)





TORQUE TORQUE

80080100 80080200Torque Screwdriver 0.1 - 3.0Nm• Adjustable Torque Screwdriver with 1/4” sq drive• Supplied with 5mm hex key for torque adjustment• Scale graduated in 0.1Nm increments• Precise tool ideal for critical torque settings as found on TPMS Valve Cores and on low torque TPMS valve nuts

Torque Screwdriver 2.0 - 10.0Nm• Adjustable Torque Screwdriver with 1/4” sq drive• Supplied with 5mm hex key for torque adjustment• Scale graduated in 0.5Nm increments• Includes 3/8” sq dr handle for easier application of torque• Precise tool ideal for critical torque settings on most TPMS valve nuts• Also ideal for fitting of many other automotive components where precise torque is recommended - e.g. Sensors, Plastic Trim, Dashboard Components, Glow Plugs etc

80083000

80093500

TPMS Comprehensive + Torque Tool Kit• Set of tools for the correct application of critical torque settings when working with TPMS systems on modern vehicles• Contains all the appropriate tools for servicing and replacing TPMS Valve Cores and TPMS Valve Nuts• Supplied in foam - Ideal for tool box drawer• Contents:- Torque Screwdriver 0.1 - 3.0Nm - Torque Screwdriver 2.0 - 10.0Nm- 3/8” sq dr T-Bar Handle - for 80080200 - 1/4” Valve Core Tool- 1/4” Torx Bit T10 - 1/4” Torx Bit T20- 1/4” Deep Socket 11mm - 1/4” Deep Socket 12mm- TPMS Grommet Tool - 1/4” one way ratchet for loosening valve stem- T-Handle Allen Key

Universal Digital Torque Angle Gauge• For turning torqued fasteners through a further angle, as per vehicle manufacturers’ specifications• Simple to use: Calibrate, set angle, mount and use• Magnetic attachment• One single tool can be used on 1/4”, 3/8”, 1/2”, 3/4” drives• Fits onto most ratchets, torque wrenches and power bars• Indicates increasing angle on LCD display • Works in both directions of rotation• Audible notice when setting reached • LED’s glow red when setting exceeded• LED’s glow yellow when close to setting and change to green when desired setting is reached

SUPPLIED IN FOAM FOR TOOL BOX DRAWER

£82.95

£229.95

£82.95


5

80010000

80030000

80020000‘Motorq 100’ - 3/8” Push-Thru Torque Wrench• 3/8” push thru sq dr • 20 - 100 Nm• 15 - 80lbs.ft • Length: 353mm• Weight: 0.73kg

‘Motorq 300’ - 1/2” Push-Thru Torque Wrench• 1/2” push-thru sq dr • 60 - 300 Nm• 45 - 220lbs.ft • Length: 570mm • Weight: 1.40kg

‘Motorq 200’ - 1/2” Push-Thru Torque Wrench• 1/2” push thru sq dr • 40 - 200 Nm• 30 - 150lbs.ft • Length: 442mm • Weight: 1.01kg

OFFER £124.95SAVE £25.00

LIST PRICE £149.95

OFFER £102.95SAVE £25.18

LIST PRICE £128.13

OFFER £119.95SAVE £26.37

LIST PRICE £146.32

OFFER £129.95SAVE £30.92

LIST PRICE £160.87

TORQUE

80033000

80040000

80055000

80039900

80050000

‘Motorq 330’ - 1/2” Push-Thru Torque Wrench• 1/2” push-thru sq dr • 60 - 330 Nm• 45 - 250lbs.ft • Length: 684mm• Weight: 1.40kg

‘Motorq 400’ - 3/4” Push-Thru Heavy Duty Torque Wrench• 3/4” push-thru sq dr • 150 - 700 Nm• 100 - 500lbs.ft • Length: 1150mm• Weight: 6.30kg

‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench• 1” Sq. Dr (uses ¾” to 1” stepped convertor)• 700 - 1500 Nm • 500 - 1000lbs.ft• Length: 1475mm • Weight: 10.40kg

‘Motorq 399’ - 3/4” Push-Thru Torque Wrench• 3/4” push-thru sq dr • 80 - 400 Nm• 60 - 300lbs.ft • Length: 676.5mm• Weight: 1.40kg

‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench• 3/4” push-thru sq dr • 300 - 1000 Nm• 200 - 750lbs.ft • Length: 1475mm• Weight: 7.30kg

‘Motorq’ Heavy Duty Torque Multipliers• Single stage epicyclic gears, producing a 5 : 1 multiplication ratio• Use with conventional torque wrenches for heavy duty applications• Supplied with reaction bars, in plastic storage case • After-sales service available

Professional Torque Wrench Handles • SP torque handles are developed from the ‘Motorq’ Professional torque wrench range, sharing the same high precision engineering and durability• For many applications a spanner end fitting rather than a socket is essential for access and time - saving on applications where using a socket is difficult and a spanner end fitting is ideal e.g. an engine bay pipe union• End fittings secure positively onto a 16mm diameter spigot using a lock and release mechanism

Part No. Input Dr. Max. InputOutput Drive

Max. Output

Weight (kg)

Price

80060000 1/2” sq dr / 32mm hex 260Nm 3/4” 1300Nm 4.3 £659.00

80065500 3/4” sq dr / 36mm hex 540Nm 1” 2700Nm 4.5 £659.00

Part No.Range

LengthWeight

(Kg)Price

Nm lbf.ft

80091000 8-60 5-45 301mm 0.55 £105.00

80093000 40-200 30-150 423mm 0.78 £110.00

Part No.Sizemm

Price

80091300 13 £51.95

80091400 14 £51.95

80091500 15 £51.95

80091600 16 £51.95

80091700 17 £51.95

80091800 18 £51.95

80091900 19 £51.95

6

OFFER £139.95SAVE £36.86

LIST PRICE £176.81

OFFER £369.95SAVE £32.88

LIST PRICE £402.83

OFFER £205.95SAVE £43.64

LIST PRICE £249.59

OFFER £370.95SAVE £41.10

LIST PRICE £412.05

OFFER £585.95SAVE £32.13

LIST PRICE £618.08

NEW

Popular Ring End Fittings

Torque Wrench Handles

Available fittings sizes from 7 - 27mm / 1/4” - 11/16” - Ask for detailsOther fittings (Open Ends / Flare Ends) are also available - Ask for details

17mm Ring End Fitting

STAR BUYSAVE £49.95

PURCHASE 960200SP (ABOVE) FOR:

OFFER £645.00SAVE £49.95

LIST PRICE £694.95

INCLUDES SP Coil Kit

96015000

WORKSHOP TOOLS AIR TOOLS

SP Induction Heater + with SP Coil KitKey features of the SP Induction Heater + (Both 110V & 230V models)• Operates cooler for better efficiency, handling and product longevity • Carry Case with storage for all attachments • Full CE certificate • Long operating cycle time • A true 1,000 watts max output power available • LED light illuminates work area • 1 year warranty - Parts/Labour • Integrated CE filter improves handling of product • Includes rope, u-form & pre-formed coil

TWO VERSIONS AVAILABLE - 110v / 230v

66050400

96015000

88050000 68786000

66095100Vehicle Fluid Change Syringe - 200cc • Transparent design to easily view the fluid• Suitable for fluid suction and supply in vehicle service• Composite plastic resistant to brake fluid & antifreeze• 200cc capacity with quick disconnect tube

1/2” Impact Bar• For loosening rusted or seized bolts using impact force• Use with impact sockets and driver bits• Bi-directional – use to loosen or tighten fasteners• Impact absorbing composite handle• Swivel head aids with operation in limited access situations• Produces 8 x torque multiplication with each hammer blow

Universal Extender - 340mm• Provides additional leverage in a secure manner• Ideal for use with sockets, spanners, allen keys etc• Loosens tight connections on hard to reach areas

Vehicle Fluid Change Syringe - 1.5L• Transparent design to easily view the fluid• Ideal for applications such as engine / gear oil & differential fluid• 1.5L capacity & rotative switch off• Suitable for fluid suction and supply in vehicle serviceOFFER £19.95

SAVE £5.00LIST PRICE £24.95

OFFER £41.50SAVE £8.45

LIST PRICE £49.95

£69.95

£29.95

02251000Stud Remover & Installer Kit• Unique design allows the installation & removal of studs without damaging the threads• Each stud size includes 1 x removal & 1 x installation tool• Installation tool allows tightening & torque without thread damage• Kit includes: M6 x 1.0 / M8 x 1.25 / M10 x 1.25 / M10 x 1.50 studs

£69.95

NEW

NEW NEW


7

£99.95SP Coil Kit• 8 x popular sizes of interchangeable coils • Supplied in protective case

SP Induction Heater + with SP Coil Kit (96015000 - below)• Specifically designed for the UK/EU: 230v / 6 amp / 1000 watt

960200SP

SP 110V Induction Heater +• Specifically designed for the UK/EU: 110v / 6 amp / 1000 watt• Designed for site work where only 110 Volt power is permitted • Provides safe and near instant heat for site work, construction and factory maintenance users, providing a small, fast and flexible tool in place of open flame options when heating components • Time saving tool ideal for use in all environments and makes the completion of on-site risk assessments far easier

96021100

£645.00Shown for illustrative

purposes only

NEW

AIR TOOLS

SP Induction Heater + with SP Coil KitKey features of the SP Induction Heater + (Both 110V & 230V models)• Operates cooler for better efficiency, handling and product longevity • Carry Case with storage for all attachments • Full CE certificate • Long operating cycle time • A true 1,000 watts max output power available • LED light illuminates work area • 1 year warranty - Parts/Labour • Integrated CE filter improves handling of product • Includes rope, u-form & pre-formed coil

9020600090220000Universal Air Swivel Joint Inlet• 2 x 360° rotation • Industrial quality• Heat treated connecting screw

High Quality Air Tools that set the standard for Torque!

PURCHASE ANY AIR TOOL AND SERVICE / LUBRICATION KIT TOGETHER

& RECEIVE A FREE STORAGE CASE

Part No. Drive Max Torque Nm (Reverse)

Torque Nm(Fwd)

Noise(dBA)

Air Consumption

(l / min)

Weight(kg)

Impact Wrench Price

Service & Lubrication

Kit Price

Combined Price

Storage Bag

902010SK 1/2” 1600 1084 94.2 135 1.8 £179.00 £17.95 £196.95 FOC902015SK (Mini)

1/2” 680 500 93.5 130 1.08 £169.00 £17.95 £186.95 FOC

902013SK(Ultra-Short)

1/2” 680 500 95 134 1.3 £159.00 £17.95 £176.95 FOC

902020SK 3/4” 2600 2000 97 210 3.2 £499.00 £17.95 £516.95 FOC

902025SK 3/8” 680 500 93.5 130 1.08 £169.00 £17.95 £186.95 FOC

902035SK 1/4” 90 90 98.2 105 0.9 £139.00 £17.95 £156.95 FOC

902045SK 1” 3100 2200 110 305 6.8 £849.00 £17.95 £866.95 FOC

£14.95

90215000 90201300Air Tool Service & Lubrication Kit• For servicing air tools• Includes 1 x bottle of air tool oil, 1 x tube of air tool grease, applicator nozzle and grease press

90215100 - 1 x bottle of air tool oil (250ml)

90215200 - 1 x tube of air tool grease (100g)

90215300 - 1 x grease press

£17.95

£5.95

£6.95

£8.95£159.00

NEW NEW1/2” Impact Wrench - Ultra Short• Extremely short body specifically designed for use in confined spaces • See table above for specs

90201000

Impact Wrench Specifications:

Note: If ordering an air tool on its own, replace the SK reference at the end of the part number with ‘00’

Other specialist air tools including the ‘Bionigrip’ range of Air Die Grinders, Micro Die Grinder and Air Drill are also available - visit www.sykes-pickavant.com for further details

Optional Extra: 90201100 - Rubber Boot for 1/2” Impact Wrench (90201000) also available

‘Vibro-Impact’ Air Hammer• A unique concept to aid the removal of seized suspension parts• The ‘Vibro-Impact’ system allows for the controlled application of force via an air powered impact hammer• Allows the operator to control & gradually increase the force being applied, in order to loosen seized components• High visibility green handle to help reduce trip hazard • Features a built-in shock-absorber in order to minimise risk of damage if too much pressure is accidentally applied• Low vibration for user comfort• Supplied with a handy wall mounted storage bracket and a set of four impact hammers for variable applications

OFFER £275.00SAVE £60.00

LIST PRICE £335.00

Scan the QR code to watch a video of the

‘Vibro-Impact’Air Hammer

Signal Hose - 10mm (3/8”)• Length: 10 metres• Abrasion resistant outer cover• High-visibilty hose to reduce trip hazard• Working temp range: -40°c to +65°c• Working pressure: 300psi• Break pressure: 1000psiN.B. Hose supplied without fittings £29.95

90210000

8

DIESEL INJECTOR COMPRESSION & PRESSURE TESTING

085930V2 08585000

017500V2

Glow Plug Removal KitUpdated kit now includes additional parts- 6 x extractor sockets - 1 x dual size high tensile step drill- 1 x narrow pulling unit set - 1 x drill holder extension- 2 x taps - 2 x drill bits- 2 x glow plug chamber cleaning brushes• For removing damaged and broken glow plugs from cylinder heads• Ideal for use where a glow plug has sheared off just below the hex, or flush with the cylinder head• Removes 8mm & 10mm glow plugs (M8 x 1.0 thread or M10 x 1.0 thread)• Comprehensive kit includes all necessary adaptors, centering and thread cleaning tools to safely remove the damaged glow plug without damaging the cylinder head• Supplied in case with foam

Heavy Duty Slide Hammer InjectorRemover Kit• For removal of Bosch, Delphi, Denso and Siemens injectors• Features a flexible u-joint adaptor for access in restricted areas• Contains: - 6 x Injector adaptors: M14 x 1.5, M16 x 1.0, M17 x 1.0, M20 x 1.0, M25 x 1.0, M27 x 1.0 - 4 x Injector Solenoid removers: M25, M27, M29, M30 - 2 x Nozzle Extractors: 6mm Tamperproof: 10mm hex 7mm Tamperproof: 10mm hex• Heavy Duty Slide Hammer: Hammer Weight: 5.0kg (Total Weight: 8.0kg)

Diesel Injector Seat Cleaner Set• Cleans injector seats and chambers when changing or reconditioning diesel injectors• Helps to avoid blow-back due to poorly seated injectors • Now includes: - Removal tool for copper washers - Wire brush cleaning set for chamber walls - Injector blanking plugs to avoid debris entering the cylinders - Centralising stem to improve correct cleaning seating angle

Hydraulic Injector Puller SystemsUpdated kits now include a set of solenoid sockets (01513500) and 2 x tamperproof sockets • For the removal of stubborn injectors• Provides controlled force to aid the removal of seized injectors where there is insufficient access for traditional slide hammers• Uses a multi-position frame, with adjustable legs of different lengths and a selection of mounting adaptors to allow alignment of the tool with the injectors on a wide variety of modern diesel engines• Supplied with injector adaptors for most modern injector types: M14 | M16 | M17 | M20 | M25 | M27

M9R Renault Kit (18582500) Applications:Renault / Nissan / GM – Dci 2 litre engines (M9R)

WHEN YOU PURCHASE 185800V2SP OR 185810V2SP WORTH £101.90

FREE PSA Adaptor Plate (18583000)A bespoke add on kit for use on PSA 2.0 & 2.2 litre HDi diesel engines

Hydraulic Injector Puller Kit • 10 tonnes Hydraulic Hollow Cylinder provides the force – use with standard hydraulic pump (not supplied)

Mechanical Hydraulic Injector Puller Kit • As per 185800V2SP kit (left) but includes a mechanical hydraulic ram • Allows use of the kit ithout the need for a separate hydraulic pump£999.95

185800V2SP185810V2SP

£1199.95

£175.00SAVE £44.00

STAR BUY

NEW UPDATED KIT

OFFER £199.95SAVE £50.00

LIST PRICE £249.95

OFFER £245.00SAVE £50.00

LIST PRICE £295.00

&


9

COMPRESSION & PRESSURE TESTING

314200V2

31405000

31427500

31470000

NEWCombined Petrol & Diesel Cylinder Leakage Tester Kit

OFFER £215.00SAVE £31.95

LIST PRICE £246.95

OFFER £156.50SAVE £19.45

LIST PRICE £175.95

OFFER £375.00SAVE £24.95

LIST PRICE £399.95

OFFER £169.95SAVE £13.00

LIST PRICE £182.95

Diesel Engine Compression Test Kit - Standard Car Kit• For both direct and indirect diesel injected engines• Checks engine compression under cranking conditions• Enables cylinder access through dummy injector and glow plug adaptors• Built-in pressure relief valve enables repeat tests without dismantling• Supplied in plastic case with foam insert• 560mm Rubber Hose• Gauge Scale: 0-60bar, 0-860psi

Petrol Engine Compression Tester• Specially designed for deep seated spark plug ports with long narrow threads• Positive lock - quick release connector, ensures adaptors cannot accidentally be left in the spark plug port (which would then become extremely difficult to remove with deep seated plug ports)• Specially designed self-centering adaptors ensure minimal risk of cross threading when attempting to screw the compression adaptor into the spark plug port• Supplied in plastic case with foam insert• Gauge Scale: 0 - 20bar, 0 - 190psi

Diesel Engine Compression Test Kit - Common Rail Diesel (CRD)• Covers a wide range of modern CRD diesel injected engines• Checks engine compression under cranking conditions• Enables cylinder access through dummy injector and glow plug adaptors• Built-in pressure relief valve enables repeat tests without dismantling• Supplied in plastic case with foam insert

Oil Pressure Test Kit• Helps to diagnose worn oil pumps and engines, faulty oil pressure switches and pressure warning indicators• Shock protected dual scale gauge, for quick & accurate oil pressure checks• Permanently oil primed, 1m long flexible hose, enables access to difficult to reach oil switch ports• Small profile, quick coupling adaptors with built-in shut-off valve• 10 x oil switch port adaptors• Supplied in plastic case with foam insert• Gauge Scale: 0 - 10bar, 0 - 150psi

10

31370000

31370500

03965500

Petrol only Cylinder Leakage Tester Kit• As per kit above excluding glow plugs and dummy injector

M14 / M18 Long Reach Spark Plug Adaptor

Twin gauge system showing input pressure and percentage of pressure loss to give indication of

the condition of the engine

31370000

£19.95

£249.95

£149.95

• An alternative to conventional compression testers, which provides a direct indication to the location of the leak by measuring the rate of loss of compression for individual cylinders• Helps to diagnose worn / broken piston rings, burnt / leaking valves and faulty head gaskets• Includes a selection of glow plugs and an adjustable dummy injector for modern diesel engines. The adaptors are also compatible with diesel compression testers - see below• Supplied with M12 and M14 brass quick release spark plug adaptors to suit most modern petrol cars• Adaptors from petrol compression kits and diesel common rail kits are also compatible with the cylinder leakage tester

PRESSURE TESTING

PRESSURE TESTINGPRESSURE TESTING Tel: 01543 679900 www.sykes-pickavant.com

11

Petrol Engine Compression Tester - Extra Long Hose

Extra Long Flexible Adaptor M14 x 158mm (Ford Zetec)

Extra Long Flexible Adaptor M12 x 380mm

31402000

31400900

31401100

COMPRESSION FUEL

Petrol Engine Compression Tester

Diesel Engine Compression Test Kit -

Standard Car Kit

Diesel Engine Compression Test Kit -

Premier Car Kit

Diesel Engine Compression Test

Kit - CV

Petrol Engine Compression

Tester - Quick-Release Kit

Diesel Engine Compression Test Kit - Common Rail

Diesel (CRD)

Cylinder Leakage TesterPetrol only

Diesel Engine Compression Test Kit - Land Rover

Combined Petrol & Diesel Cylinder Leakage Tester

Petrol Engine Compression Tester Kit

31400000 314200V2 314295V2

31430000

31405000 31427500

31370500 314285V2

31370000

31400300

PETROL DIESEL

PETROL & DIESEL

PRESSURE TESTING

PRESSURE TESTING

12

Ford EECIV Flexible Adaptor

Diesel Fuel System Bleeding Kit

Common Rail Diesel (CRD) Fuel Return Flow Kit

Ratchet Pump Kit

Fuel Injection Schrader Valve Connector Kit

Fuel Injection Schrader Valve Connector Kit for Fiat Group

Comprehensive Schrader Valve Test Set

Renault (10 / 12mm)Adaptor

31488000 31467500

31461000

31462000

31467600

31485000

31486500

31485300

Fiat / GM Quick-Connect

Adaptor

31488500

31489000

FUEL

Fuel Injection Pressure Test Kit for

Petrol Engine Vehicles

Common Rail Diesel (CRD) High Pressure Test Kit

Common Rail Diesel (CRD)High Pressure Test Set

314875V2 314650V2 314660V2

PETROL DIESEL

PETROL & DIESEL

Petrol Engine Compression Tester Quick-Release Kit

Petrol Engine Compression Tester Quick-Release Kit

VW Group Fuel Pump Pressure Test Kit for PD (Diesel) & FSi (Petrol) Engines

VW Group Fuel Pump Pressure Test Set (PD)

Premier Low Pressure Fuel Test Kit

314860V2

31468000 314925V2 3149200031469000

31460000

Fuel Injection Pressure Test Kit for Schrader

Test Ports

31489500

Diesel Fuel System Bleeding Kit -

Master Kit

31467000

Common Rail Diesel (CRD) Low Pressure

Combined Kit

Common Rail Diesel (CRD) Low Pressure Test Gauge Kit

SUSPENSION SUSPENSION

0879000008786500

£249.00

£49.95

Universal Press & Pull Sleeve Kit - Car / LCV Kit• Contains 20x Press Sleeves in 2mm diameter steps• Inside Diameter Range: 34 - 72mm • Outside Diameter Range: 44 - 82mm• 4x Step Plates / 4x Pulling Spindles with thrust bearings

XS Sleeve Kit - Basic• For use as an add-on to the Standard Press & Pull Sleeve Kit (08780000 - above) to increase applications for smaller bushes• Contains 10 x Press Sleeves in 2mm diameter steps• Inside Diameter Range: 14 - 32mm • Outside Diameter Range: 24 - 42mm• Includes extension spindle with thrust bearing, lock nuts and grease• Supplied in moulded storage case

£379.00

PURCHASE 08780000 UNIVERSAL PRESS & PULL SLEEVE KIT & 08785500 XS SLEEVE KIT (ABOVE) FOR A SPECIAL OFFER PRICE

ALREADY HAVE ONE OF THESE??....

....THEN THE NEW XS SLEEVE KIT IS A GREAT ADDITION!

087800SP Universal Press & Pull Sleeve Kit c/w XS Sleeve Kit - Basic

+ £578.00 SAVE £50.00

COMBINED OFFER

08780000

08785500

18705500

=XS Sleeve Kit - Master• Stand alone kit for smaller bush applications• Contains 10 x Press Sleeves in 2mm diameter steps• Inside Diameter Range: 14 - 32mm• Outside Diameter Range: 24 - 42mm• Includes 2 x spindles, 4 x stepped back plates, extension spindle with thrust bearing, lock nuts & grease• Supplied in moulded storage case

£325.00 Universal Press & Pull Sleeve Kit - SUV / LCV• For use as an add-on to the Standard Press & Pull Sleeve Kit (08780000 - above)• Allows access to a wider range of vehicles - e.g. SUV’s & LCV’s• 2 x 20mm Pulling Spindle Adaptors with Thrust Bearings M20• 8 x Press Sleeves in 2mm diameter steps • 4 x Step Plate Discs• Inside Dia. Range: 82 - 88mm & 98 - 104mm • Outside Dia Range: 92 - 98mm & 108 - 114mm

OFFER £675.00SAVE £150.00

LIST PRICE £825.00

NEW LOWER PRICED SOLUTION


13 KEYFOR USE WITH UNIVERSAL PRESS FRAME (18700100)





MADE IN THE UK

Press Frame Extension Legs & Nose Piece• New kit designed for use with the 0878 range of sleeve kits• Extends the 187 press frame - internal capacity from 200 to 300mm• Pair of 100mm legs fit onto original 187 press frame legs• Extra extension legs can be added to further increase length• Nose piece connects press frame ram with 4 x step plate discs from the 0878 range of sleeve kits

SUSPENSION

180700V23-Size Ball Joint Separator• Ideal for use on vehicles: Audi / VW (A3, A4 and A6 with double wishbone), BMW & Mercedes-Benz• Drop forged rugged, flat design with three interchangeable forks - 24, 27 and 31mm• Forks are attached to the centre screw to allow continuous adjustment within the jaw capacity range• Features an internally operated drive spindle (M24) and an elongated recess in the forks, providing a safe & secure operation• Jaw capacity range: 30 - 65mm

£159.00

£99.95

£99.95

08065000

08070000

18732100

18732200

05050000

Ball Joint Separator – HGV applications• Strong, heavy duty body with strengthened fork and lever allows for greater force to be applied• Can be upgraded to hydraulic power • Jaw Opening: 70mm Jaw Throat Width: 36mm Jaw Throat Depth: 50mm

Land Rover Drop Arm Puller• Extra heavy duty puller for the removal of drop arms from the toughest of vehicle applications• Ideal for Land Rover Discovery 1 & 2, Range Rover P38, Land Rover Defender and Ford Transit applications• The puller is designed to be used with the steering box already removed from the vehicle• Includes a force screw allowing a technician to effectively shock the drop arm to become loose from the steering box• Jaw spread capacity - 60mm• Jaw reach capacity - 80mm

Adaptor Sets for Focus / Fiesta Trailing Arm Bushes• For the removal and installation of trailing arm bushes• Adaptors can be used in a press frame with either a 18704100 pressure screw (recommended) or a hydraulic ram*Note - Adaptor Ring 18780400 required

Adaptor Set for Fiesta Trailing Arm Bushes• Bush OEM reference numbers: 1011363, 1016439, 96FB5K653CA• Applications: Fiesta ‘95-’02, KA ‘96-’08, Puma ‘96-’02

Adaptor Set for Focus Trailing Arm Bushes• Bush OEM reference numbers: 1 061 670, 1304124• Applications: C-MAX ‘07- MPV, MKI ‘98-’04 (Estate, Hatchback, Saloon, Van), MKII ‘04- (Convertible, Hatchback, Saloon, Van), Kuga ‘08- Off Road, Mazda 3 (BK) ‘03-’09 (Saloon, Hatchback), Mazda 5 (CR/CW) ‘05- MPV, Volvo C30 ‘06- Hatchback, Volvo C70 II ‘07- Cabrio, Volvo S40 II ‘04-’12 Saloon, Volvo V50 ‘04-’12 Estate

12 Tonne Hydraulic Ball Joint SeparatorUpdated kit now uses power from the SP 12 tonne hydraulic ram• Hydraulic version of the 08070000 HGV Ball Joint Separator (below)• Specification: - Jaw Opening: 70mm - Jaw Throat Width: 36mm - Jaw Throat Depth: 50mm

OFFER £219.95SAVE £70.00

LIST PRICE £289.95

OFFER £179.00SAVE £20.95

LIST PRICE £199.95

OFFER £115.95SAVE £24.00

LIST PRICE £139.95

Ford & Volvo Rear Bush Tool KitUpdated kit now also capable of installing & removing the longer bush as fitted onto the nearside of newer model Volvo cars• Individual press piece kit for dismantling and installing the rear wishbone / trailing arm bush• Correctly aligns & sets bush depth in trailing arm upon installation, so not to tear bush• Suitable for: Ford: Mondeo & Mondeo Estate ‘07-, S-Max & Galaxy ‘06- Volvo: XC70 & V70 ‘07-, XC60 ‘08-, S60 & V60 ‘10-

ON CAR SOLUTION

For a full applications list, please visit our website - www.sykes-pickavant.com Suitable for both standard and new longer bushes

OFFER £279.00SAVE £116.00

LIST PRICE £395.00

087304V2 NEW LOWER PRICE!

14FOR USE WITH AIR TOOLSSee page 8 COME & SEE US AT THE CV SHOW - NEC - 14-16 APRIL - STAND 4F31

MADE IN THE UK

WORKSHOP EQUIPMENT TESTING

53451000

53451100

53451500

53451200

53453000

NEW Silver Series range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic arm back-run system and V blocks• Welded, heavy duty steel frame • Two speed pump • Overload safety valve • Automatic arm return • Pressure gauge • V blocks• Manufactured in the EU • Piston over-travel limit stop• Winch for table (For models 53436400 & 53436500)

NEW

Part No. Rating Height (mm)

Width (mm)

Depth (mm)

Bed Depth (mm)

Range (mm)

Weight (kg) Price

53436000* 15T 1930 920 650 170 85 - 950 150 £549.00

53436200* 20T 2030 940 650 180 65 - 1030 165 £669.00

53436400* 30T 2060 1120 650 200 115 - 1020 230 £989.00

53436500 50T 2290 1220 650 210 70 - 1065 370 £1549.00*Recommended for use with Universal Press Support Block - 08770000 Other sizes of press are available - Contact Customer Services for details

£49.95

£54.95 £9.95

NEW

NEW

NEW

NEW

NEW

15-20T Press Plate• Heavy duty plate sits on press bed with hole to push components through

30-50T Press Plate

Accessories Box• Galvanised accessory box useful for storing press piece sets etc• Includes hanging hook

15-20T Press Piece Set• Includes one adaptor & three press pieces • Sizes: 10, 18 and 24mm diameter

30-50T Press Piece Set• Includes one adaptor & six press pieces • Sizes: 5, 10, 14, 18, 24 and 29mm diameter

36600500

36600700

£429.00

£24.95


15

Fuel Extractor / Retriever• Retrieve fuel following a filling error, removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc• Stainless steel mobile 45-litre tank• Cleanly draws up or pushes out fuel due to a venturi system• Includes 2 anti-static ground cables, overflow line and 3 fuel probes• Emptying via the tank filler neck or fuel lines

2m long fuel probe also available (366005-13)

Adaptor Set for 36600500• Set of fittings to allow 36600500 (above) to connect in line, before the injection pump (on most fuel systems) for safe emptying of fuel

KEYFOR USE WITH UNIVERSAL PRESS FRAME (18700100)





£24.95

53390000

£269.00

Pneumatic Oil Extractor• Remove and extract waste fluids or oil from an engine with flexible PV tube and robust probe• Powered from compressed air• 70L tank capacity• Adjustable 10L oil capture pan• Visible fill level indicator• 1 - 2 L/Min Suction capacity depending on nozzle used• Working pressure 8-10 Bar• Empty tank with compressed air at maximum 1 bar pressure• Includes selection of PV tubes to cater for different lengths and diameters of dipstick tubes

WARNING: Do not use with corrosive or inflammable products

OFFER £89.00SAVE £16.00

LIST PRICE £105.00

OFFER £99.00SAVE £16.00

LIST PRICE £115.00

TESTING

TPMS - Tyre Pressure Monitoring - Sensor Testing, Activation & Clone Valve Programming ToolSensor Activation - Sensor Checking - Sensor Replacement• Able to re-program “Clone” valves wirelessly without using a PC or docking station• Approved for use with Schrader & Alligator EU frequency re-programmable TPMS valves• Includes sensor replacement, technical and tyre rotation procedures- Step by step guidance for valve cloning - Sensor replacement procedures

TPMS PLUS - High Level Diagnostic TPMS Tool

306610V2

306615V2

325200SP

30077500

MV8550 01490000

£1295.00

£1495.00

READ IT & FIX IT!!

For further details and to read more about TPMS and its features, please visit our website: www.sykes-pickavant.com

Portable 4 Gas Analyser with PrinterDeveloped from the 32420000 gas analyser• For fault diagnosis, tuning and pre-MOT testing• Truly portable hand-held gas analyser - Ultra light weight - only 1.1kg• Measures CO, HC, CO2, O2 (NOx model option available on request) to Class 1 accuracy• Suitable for both petrol and LPG vehicles and ideal for both static and dynamic testing• Internal memory stores up to 250 test results - manual & automatic recording options• Provides Lambda / AFR measurement and corrected CO• Pump speed control - Improves battery life • Up to 4 hours internal battery life• Bluetooth connectivity to PC (additional software required) • Large graphic display • Free analytical software available to download • Includes printer and AC / 12v chargers

EGR Valve Activator• For testing & cleaning valve as part of routine servicing - no need to remove valve from vehicle for use• Prevents the unnecessary replacement of EGR Valves• Actuates EGR Valves in a fixed open position for cleaning, and in an open / closed sequence for freeing carbon deposits• Choice of two test cycles: At the end of either test cycle the tool gives an audible indication when a faulty and unserviceable EGR valve is connected• Supplied with x3 connectors for different makes of valves• Power Supply: 220 - 240V mains Open / Close Time Cycle: 90 sec• Includes applications list - visit www.sykes-pickavant.com for details

Mityvac Silverline Elite Automotive Kit• Ideal for a variety of workshop tasks requiring vacuum and / or pressure featuring a dual convertor to switch from vacuum to pressure• Ideal for a variety of diagnostic tests which require a pressure source - e.g. EVAP sensors, Cooling system leak tests etc• Ideal for a variety of workshop tasks requiring vacuum and / or pressure - e.g. Diagnostics, brake bleeding, fluid transfer, evacuation, sampling etc

Professional Circuit Tester• 6 / 12 / 24 volts• Robust handle with hardened steel probe• 1.5m heavy duty insulated rubber lead• Uses standard automotive bulb to indicate continuity

OFFER £115.95SAVE £14.00

LIST PRICE £129.95

OFFER £189.00SAVE £10.95

LIST PRICE £199.95


LIST PRICE £19.95

16

All the features of the TPMS Tool (306610V2 - above) PLUS the following additional features:• Connects to TPMS ECU via EOBD diagnostic lead (Containing full multiplexing functionality)• Sensor re-programming via the EOBD socket • Sensor & TPMS ECU fault code reading / deletion

FOR USE WITH AIR TOOLSSee page 8 COME & SEE US AT MECHANEX - EVENT CITY - MANCHESTER - 19-20 MAY - STAND F21

£695.00

COIL SPRING COMPRESSION 3858’ RANGETel: 01543 679900 www.sykes-pickavant.com

Internal Coil Spring Compressor• Specially designed for vehicles with front or rear wishbone suspension• Designed to fit applications where the access hole in the lower wishbone is as small as 30mm diameter • Unique Torque Safety Key extends functionality and adds safety - 100Nm max torque and allows for use with an impact wrench• Supplied with two pairs of specialist jaws from 90mm to 140mm diameter• Safe working load of 2500kg (25000N)• Fits a wide variety of vehicles with wishbone suspension including: BMW / Citroën / Chrysler / Honda / Hyundai / Kia / Mazda / Mitsubishi / Peugeot / Renault / Seat / Skoda / Suzuki / Toyota / Volvo / Volkswagen• Full applications list included & also available on our website: www.sykes-pickavant.com

Heavy Duty Coil Spring CompressorUnique Sykes-Pickavant design of vice-mounted Coil Spring Compressor• Features double-ended hex drive (2 x 24mm hex) for ease of use - Can be operated from either end using ratchet or 24mm wrench - Can be safely unwound in the event of shear pin failure• Hex drives at both ends, incorporate shear-pins for safety - Features external thrust bearing for ease of service - Heat treated, Self-lubricating operating screw• Safe Working Load = 15000N• Supplied with two sets of universal jaws: - Medium Jaws: 110-150mm dia - Large Jaws: 140-195mm dia

Note: 084000 Series jaws can also be used with 08390000 (Requires 08393200 Screws)

N.B. Not recommended for use with Air / Electric Impact Power Tools

Mechanical Coil Spring Compressor WorkstationUniversal piece of equipment for assembling & disassembling struts & coil springs• Standard workstation construction but with Heavy Duty Mechanical compression components in place of pneumatic parts• Allows for use where air supply is limited, restricted or unavailable i.e. mobile use• High power mechanical spindle allows for the application of up to 1600kg of compression force onto contained spring• Long main spindle achieves large 420mm of stroke – greater than our pneumatic workstations• Powered by easy access 19mm hex drive on top of tool direct onto main spindle and can be used with either hand tools or even impact air tools• Includes adjustable vice clamp as standard• Compatible with all other Sykes-Pickavant workstation standard jaws, brackets & accessories

Specialist Jaw for Extra Heavy Duty Coil Spring Compressor • Specialist jaw for Extra Heavy Duty Coil Spring Compressor (08400000 - left)• For counter clock springs as typically found on Honda HR-V / CR-V and Prelude vehicles• Suitable for spring diameters: 145 - 195mm

08450000

08390000 38680000

08402500

OFFER £495.00SAVE £100.95

LIST PRICE £595.95

OFFER £399.00SAVE £70.00

LIST PRICE £469.00

Extra Heavy Duty Coil Spring Compressor c/w Universal Multi-Purpose Jaws• Safe working load 2250kg (22500N)• Supplied with 1 x pair of universal MULTIPURPOSE jaws- Patented innovative shape of jaw design fits most types and sizes of springs- Protective high-tech inserts in jaw for added safety- Jaws diameter 80-200mm covers 90% of applications• Built-in protective accessory for vice clamping• Overload shear pin for safe operator use• Large user friendly adjustable handle fo fast jaw positioning• Specialist jaw options available • TUV approved• Supplied with instructions & vehicle applications

08400000 OFFER £475.00SAVE £114.00

LIST PRICE £589.00

£795.00

UP TO 1600KG OF FORCE

17 KEYFOR USE WITH UNIVERSAL PRESS FRAME (18700100)





NEW

OFFER £59.95SAVE £15.00

LIST PRICE £71.95

3858’ RANGE

OFFER £1595.00SAVE £150.00

LIST PRICE £1745.00

UP TO 2452KG OF FORCE (AT 10 BAR)385800SP

38580200 38580400Jaw Holder• For use with 3858 and 3868 workstation brackets• Includes 3 x hanging hooks and 4 x slots for brackets• Provides a tidy and safe storage solution

Coil Spring Clamp• Tool to secure coil spring into lower bracket for use with the SP range of suspension workstations• Designed to hold the coil spring still during initial compression and restrict twisting through the bracket

£99.95 £49.95

Pneumatic Coil Spring Compressor Workstation - Extra Heavy Duty Model c/w FREE Mercedes Bracket SetUniversal piece of equipment for assembling and disassembling struts and coil springs• Suitable for cars, 4WD’s and light commercials that use McPherson strut type suspension systems• Front and side spring clamps designed for fast changeover using unique Brackets System• Fitted with Extra Heavy Duty Pneumatic Cylinder - Compression force (at 10 bar) = 2452 kg • Ideal for Extra Heavy Duty applications i.e. SUV’s, 4WD’s etc where full spring compression is required• Double-depth front plate for use on extra-long strut assemblies• Safety locking valves system – locks safety cage and prevents usage with cage open

WHEN YOU PURCHASE 385800SP

FREE MERCEDES BRACKET SET (38480100)

UPPER BRACKET FOR MERCEDES A, B, C, E CLASS & LOWER BRACKET FOR MERCEDES E CLASS

WORTH £239.95

38480700

38480400Special Bracket Porsche Cayenne / VW Touareg

Double DepthStrut Vice

£99.95

£117.95

38480100Mercedes Bracket Set - A, B, C & E Class

£239.95

38480200Upper Jaw Set for High Compression Springs

£42.95

38480500Special Bracket Mercedes C Class (2010-)

£179.95

38480600Special BracketNissan Qashqai

£97.95

Optional Accessories for use with Suspension Workstations

18

Scan the QR code to watch a video

of the suspension workstation range

NEW TO RANGE NEW TO RANGE

FOR USE WITH AIR TOOLSSee page 8 COME & SEE US AT THE CV SHOW - NEC - 14-16 APRIL - STAND 4F31

MADE IN THE UK

MADE IN THE UK

DIESEL BLEEDING & FUEL INJECTION BRAKINGTel: 01543 679900 www.sykes-pickavant.com

31467500

31467600

31467000 31485300

19

Diesel Fuel System Bleeding KitMany modern diesel fuel systems are very difficult to self-bleed once the low pressure feed circuit has been opened to the atmosphere. The circuit may have been opened by removing the fuel filter or by a damaged feed pipe. The pump unit contained in the kit enables the user to generate suction by continually squeezing and releasing the hand pump to draw the air and fuel through the low pressure system.• Designed to allow the user to bleed / prime the low pressure feed side of the diesel fuel system• Contains common sized low pressure pipe sets including: - Standard 8mm, 10mm and newer 9.65mm (3/8 inch) - Renault small & large - Ford • Typical coverage includes: Citroën, Fiat, Ford, Land Rover, Peugeot, Renault, Volvo & Vauxhall• Supplied in tinFeatures• Clear pipes for visability of air bubbles • Colour coded pipes for easy identification• High grade reinforced pipes (rated over 10 bar)• Pump incorporates one way valve for ease of use - i.e. just one hand requiredNote: Pipes are sold as a paired set. Hand pump is sold with connecting pipes and 10mm convertor pipe

Scan the QR code to watch a video of

the Diesel Fuel System Bleeding Kit

£199.95

Ratchet Pump Kit• Connects to 3/8” drive air ratchet to replace the hand pump section in 31467500 kit (above) to generate faster flow • Retaining bracket holds pump during use for one-hand operation• Easily engages with all 3/8” Dr. air ratchets • Supplied in plastic case

Note: Suitable for diesel fuel systems only

£99.95

£399.95

Diesel Fuel System Bleeding Kit - Master Kit• Master kit includes the Diesel Fuel System Bleeding Kit (as above) plus a low pressure fuel gauge (10bar), tee piece and ratchet pump• Gauge and tee piece enables the same pipes to be used for both bleeding and fuel pressure - providing a cost saving solution• The pipes and gauge can also be used on petrol engines where applicable• Ratchet pump provides a greater flow for when faster bleeding is required - i.e on some Ford models• Supplied in foam in plastic case

Comprehensive Schrader Valve Test Set• Set of schrader type fuel port test adaptors which can be used with the fuel pressure gauge supplied in the Diesel Fuel System Bleeding Kit - Master Kit - above • Can be used to bleed air from the Schrader valve test port on specific vehicles - e.g. Saab• Schrader test ports are the preferred method of measuring fuel pressure on vehicles with fuel rails• Quicker and easier than breaking into fuel lines• Applications include: Alfa Romeo, BMW, Fiat, Ford, Jaguar, Land Rover, Mercedes, Mini, Saab, Vauxhall and Volvo

£109.95

NEW

MADE IN THE UK

BRAKING

03490000Speedyvac Brake Bleeder Kit• New design one user operation brake bleeder features unique patented valve system to replace manual tap as used on previous models• Float valve shuts vacuum down when container reaches full to prevent dangerous brake fluid spray if capacity is accidently exceeded• Compact size (800ml capacity) allows for easy operation within wheel arch area• Internal shut off valve closes when not in use to prevent fluid spills when stored• Includes Autofiller unit (500ml capacity) with venting system providing unbroken continual fluid flow• Retaining clip provides clamping to all master cylinder reservoir types• Adjustable height positions on filler spout allows for correct fluid level during bleeding, preventing brake fluid reservoir running dry

Brake Pipe Flaring Kits - 270 SeriesBrake flaring tool that produces both Convex and Double Lap flares to SAE & DIN standards• Metric & imperial pipe sizes • From 3/16” to 1/2” / From 4.75mm to 12mm• Unique ‘Dial-a-Size’ Turret design • Lever cam operation for quick flaring• Automatic punch extraction from flare • Screw clamp for accurate die alignment• Variety of kits available to suit requirements • All components available individually

20

£99.00

£584.95Automatic Brake Bleeder - 12vNow includes aluminium Euro cap - angled screw type• Compatible with ABS systems• 12v powering with reverse polarity warning• Includes pump with automatic shut off valve• Regulator from 0 to 3Bar• 5L reservoir with visible level and min level indication• Auto power OFF when min level reached• 12V power cable with jack (L: 4m)• Fluid cable for brake fluid with quick coupling system (Length: 4m)• Includes fluid collection bottle & European screw-on reservoir cap• Stainless steel body• Professional pump and regulator fitted

Model specific caps also available - Ask for details

Air Assisted Caliper Piston Wind Back Tool Kit• Air operated ram applies pressure to the caliper piston, while the handle is rotated by hand• Easy to use – works on standard workshop air supply• Reversible – works on both RH and LH applications• Can be used on Wind Back and Push Back pistons• Supplied with nine adaptors which cover a wide range of popular vehicles (applications list included)• Also supplied with 3/8” converter to use with adaptors from manual kit (03619200)

34300100 03614000

OFFER £70.00SAVE £29.95

LIST PRICE £99.95

Available Kits:

Part No. Suitable for brake pipe sizes List Price

Save Price

OfferPrice

02700100 SAE Single & Double Flares: 3/16” & 4.75mm £185.00 £31.00 £154.00

02700200SAE Single & Double Flares: 3/16”, 4.75, 6, 8, 10mm DIN Single Flares: 4.75mm

£239.00 £40.00 £199.00

02700800SAE Single & Double Flares: 3/16, 1/4, 5/16, 3/8, 1/2”, 4.75, 6, 8, 10, 12mm DIN Single Flares: 4.75mm

£310.00 £55.00 £255.00

02700900SAE Single & Double Flares: 3/16, 1/4” 4.75, 6mm DIN Single Flares: 4.75mm

£215.00 £36.05 £178.95

Scan the QR code to watch a video of the

‘270’ Series Brake Pipe Flaring Tool

NEWONE USER OPERATION

MADE IN THE UK

ENGINE SERVICE BEARING REMOVAL / INSTALLATIONTel: 01543 679900 www.sykes-pickavant.com

07759700 07754600

085900V2

38360000 03810000

21

GM Gearbox Bearing / Race Remover• For the removal of taper bearing cups from clutch housings in M32, MT 20-6 and MT 32-6 manual gearboxes widely used in GM, Saab and Fiat Group• Specifically designed to spread the load equally without danger of cracking the gearbox casing

£69.95SAVE £20.00

STAR BUY08550300

Universal Timing Gear Holder• Manufactured from high strength fibre reinforced nylon polymer• Single lever design enables quick and easy use• Provides breaker bar strength for maximum holding force• Allows adjustment of cam gear once installation is complete


LIST PRICE £42.95

NEW NEWUniversal Timing Gear Holder Kit• Timing belt service kit• Includes Universal Timing Gear Holder (left) and 4 x cam clamp pieces

OFFER £49.95SAVE £30.00

LIST PRICE £79.95

OFFER £215.00SAVE £44.95

LIST PRICE £259.95Vibro Impact Glow Plug Remover Kit• For the safe, effective removal of 8, 9, 10, 11 & 12mm glow plugs• Uses controlled impact torque to create vibration in order to loosen seized glow plugs• The Vibro-Impact tool ‘loosens’ the seized glow plug, making it safe and easy to remove without the risk of broken plugs, and / or damaged cylinder heads• Includes 4 low-torque settings for controlled vibration (10, 20, 30, 40Nm)• Supplied with special long-reach 8, 9, 10, 11 & 12mm glow plug sockets, long and short extensions and universal joint for ease of access

Square Drive ¼”

Max Torque - Right 40Nm

Max Torque - Left 10 / 20 / 30 / 40Nm

Air Inlet ¼”

Air Consumption 250 ltrs / min

Speed 12,000 per min

Air Supply 6.3bar / 90psi

OFFER £249.95SAVE £4.99

LIST PRICE £254.94Universal Engine & Gearbox Support• Designed to support the engine or gearbox when the engine mountings have been removed - e.g. When replacing timing / drive belts, water pumps etc• Designed for all makes of vehicle - No need for costly model specific brackets• The unit is suspended from the chassis via the support hooks, the engine / gearbox is supported by the support pad and is counter-balanced against the underside of the vehicle by the support arms• Fully adjustable in all dimensions: - Extension: Min 630mm / Max 960mm - Support Plate Adjustment: 190mm


LIST PRICE £23.95

Adjustable Oil Filter Remover - 3 leg• Spider-type wrench, c/w geared legs which automatically tighten as the force is applied• Range: 62 to 93mm diameter• 3/8” sq. dr c/w with adaptor for 1/2 sq.dr. and / or 19mm hex

MADE IN THE UK

BEARING REMOVAL / INSTALLATION

Ford 82mm Bearing VW Group Bearing

22

Adjustable Oil Filter Remover - 3 leg• Spider-type wrench, c/w geared legs which automatically tighten as the force is applied• Range: 62 to 93mm diameter• 3/8” sq. dr c/w with adaptor for 1/2 sq.dr. and / or 19mm hex

• The GEN 2 type of wheel bearing is predominantly fitted to models from Ford, Land Rover, Mazda, VW Group and Volvo

• Includes a variety of different diameter tool kits covering a range of sizes to suit the different GEN2 bearings used by vehicle manufacturers

• Designed to distribute pressing force evenly through the outer bearing race and also allows for the suspension leg to remain in-situ on the vehicle when fitting new bearings

Part No. Size Applications Price

0812950072mm78mm82mm

Essential Kit 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front)78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 382mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70

£599.00

0812800078mm 82mm

Ford / Volvo / Land Rover / Mazda Combined Kit 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 382mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70

£345.00

08129000

62mm66mm72mm 85mm

VW Group Kit 62mm - Audi A2, VW Lupo (Front) 66mm - Skoda Fabia, VW Fox (Front), Polo 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 85mm - VW Multivan, Touareg, Transporter (Front / Rear)

£645.00

081220V2

62mm66mm 72mm 78mm 82mm 85mm

All Sizes Master Kit 62mm - Audi A2, VW Lupo (Front) 66mm - Skoda Fabia, VW Fox (Front), Polo 72mm - Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) 78mm - Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 82mm - Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC7085mm - VW Multivan, Touareg, Transporter (Front / Rear)

£845.00

Combination Kits

Individual Kits

Part No. Size Applications Price

08123500 62mm Audi A2, VW Lupo (Front) £175.0008124500 66mm Skoda Fabia, VW Fox (Front), Polo £175.0008125500 72mm

Audi A1, Audi A2, Seat Cordoba, Ibiza, Skoda Fabia, Roomster, VW Polo (Front), VW Fox with PAS (Front) £199.00

08126500 78mm Ford Focus II, C-Max, Volvo C30, C70, S40, V50 (Front), Mazda 3 £215.0008128500 82mm Ford Mondeo, Galaxy, S-Max, Land Rover Freelander 2, Volvo S80, V70, XC60, XC70 £225.0008127500 85mm VW Multivan, Touareg, Transporter (Front / Rear) £249.00

NEW

LO

WER

PR

ICES

!N

EW L

OW

ER P

RIC

ES!

Note: Spare Parts are available for all kits. Please see our website / catalogue

Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United KingdomTel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: [email protected] www.sykes-pickavant.comALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE - PRICES VALID UNTIL 30TH JUNE 2015 - REF: SPQ215GBPCOPYRIGHT 2015 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED.

Distributor Stamp:

12 Packs are available for all Fortron Fluid Accessories. Ask your Distributor for details

FLUID SERVICE SYSTEMS NEWNEW

£1995.00

Fortron Automatic Transmission Fluid Flush Machine - Fully Auto• Can replace up to 100% of transmission fluid• Ability to specify exact amount of fluid to change• Fully automatic and user friendly safe• Includes comprehensive adaptor set and Flush Service Kit• Safely cleans up and extends the service life of automatic transmissions

£3495.00 £995.00

53401500Fortron Coolant Flush Machine• Effective way of flushing and exchanging the complete cooling system fluid• Suitable for all types of coolants and vehicles• Includes a set of multi-application adaptor fittings• Air operated and portable

53402500

53404500Fortron Power Steering Flush Machine• Replaces 100% of steering fluid• Takes on average 10 minutes per service• Extends the service life of (often overlooked) system• Revitalises and conditions ‘o’ rings and seals• Portable, sturdy design• Includes Power Steering Flush Service Kit

£11.49

£11.49

£11.49

53401600

53402600

53404600

Coolant Flush Treatment Additive

ATF Flush Service Kit• Includes bottle of Automatic Transmission Flush and tube of Auto Trans & Power Steering Concentrate

Power Steering Flush Service Kit• Includes bottle of Power Steering Flush and tube of Auto Trans & Power Steering Concentrate

Includes comprehensive

adaptor set

£1749.00

Fortron Injector Max Machine• Simple and effective method of cleaning both petrol and diesel fuel systems without the removal of injectors from the vehicle• Air operated

53403500

53403800 53403900

53404000

Injector Max Vactek Fluid Bottle

Injector Max Induction Service Kit - Petrol

Injector Max Induction Service Kit - Diesel

Injector Max Premix Solvent - Diesel

£11.49

£11.49

£16.99

£17.99

53403600Injector Max Premix Solvent - Petrol

£17.99

53403700

Documents

Sykes-Pickavant Q2 - April - June 2015 Promo Brochure