CROSS-FIRE SPRAY NUCLEATED SPRAY/POUR JOINT FILL SYNERGY SERIES LPG™ Proportioner · LOCK N LOAD Gun™ · Synergy Chemistries SPI introduces the Synergy Series System(s) featuring the LPG ™ (Low Pressure Gear Proportioner). The LPG ™ is designed to work seamlessly with the Synergy Series Chemistries, including a variety of spray and pour polyurea elastomers, and spray and pour foams. Output up to one gallon per minute. LPG FEATURES Lightweight and Portable · Uses 110 volt & can plug into standard electric wall outlet · Simple to Operate · Modular Design · Low Pressure, Low Heat · Minimal Field Maintenance or Repair · Easy to Change Replacement Proportioner Pumps NEW INDUSTRY INNOVATION FROM SPI The technological advancement made with the LPG ™ Proportioner technology: · Dramatically reduces pin holes and blow holes on porous surfaces, including concrete, wood and EPS. · Eﬀectively resolves shrinkage problems normally associated with hot sprayed plural component elastomers. LPG SYNERGY SERIES ™

SYNERGY SERIES LPG - Specialty Productsspecialty-products.com/pdf/tech-docs/LPG Synergy Series Information... · SYNERGY SERIES LPG™ Proportioner & LOCK N LOAD™ Gun Joint FillLOCK

Download PDF Report

Upload
duonganh
View
231
Download
0

Embed Size (px)

Citation preview

Page 1: SYNERGY SERIES LPG - Specialty Productsspecialty-products.com/pdf/tech-docs/LPG Synergy Series Information... · SYNERGY SERIES LPG™ Proportioner & LOCK N LOAD™ Gun Joint FillLOCK

CROSS-FIRE SPRAY

NUCLEATED SPRAY/POUR

JOINT FILL

SYNERGY SERIESLPG™ Proportioner · LOCK N LOAD Gun™ · Synergy Chemistries

SPI introduces the Synergy Series System(s) featuring the LPG™ (Low Pressure Gear Proportioner). The LPG™ is designed to work seamlessly with the Synergy Series Chemistries, including a variety of spray and pour polyurea elastomers, and spray and pour foams. Output up to one gallon per minute.

LPG FEATURESLightweight and Portable · Uses 110 volt & can plug into standard electric wall outlet · Simple to Operate · Modular Design · Low Pressure, Low Heat · Minimal Field Maintenance or Repair · Easy to Change Replacement Proportioner Pumps

NEW INDUSTRY INNOVATION FROM SPIThe technological advancement made with the LPG™ Proportioner technology: · Dramatically reduces pin holes and blow holes on porous surfaces, including concrete, wood and EPS. · Effectively resolves shrinkage problems normally associated with hot sprayed plural component elastomers.

LPGSYNERGY SERIES

™

SYNERGY SERIES

LPG™ Proportioner & LOCK N LOAD™ Gun

Joint FillLOCK N LOAD™ GUN

Modular components for minimal field maintenance and repair. Low cost pumps that can be changed in ten minutes versus rebuild or repair.

On board compressorprovides positive material pressure to pump inlets.

Digital flow meterdisplays gallons and tenths.

NUCLEATED SPRAY/POUR FOAMSynergy Series Polyurethane Foam and Polyurea Elastomers

The LOCK N LOAD™ Gun (with Modular On-Off, Pressure and Output Control) is available with the following quick change attachments:

AIRLESS CROSSFIRE SPRAYReduces airborn particles by more than 75%

NUCLEATED SPRAY/POUR FOAM Synergy Series Polyurethane Foam and Polyurea Elastomers

JOINT/CRACK FILLSelf-leveling, semi-rigid polyurea elastomer. Ideal for filling or replacing construction joints, random cracks, joint faces, and spalls.

Output & Pattern Control

On/Off

Crossfire Spray Pattern

The LPG™ Propotioner Consumes less electricity than a hair dryer. Any single phase (15 amp) receptacle will power the LPG™.

Silica Air-Dryercan be reused.