System 800xA 5.1 Product Catalog (FP4 included)

System 800xA 5.1Product Catalog (FP4 included)

2 | System 800xA Product Catalog

System 800xA Extended Automation 4

The Power of Integration 4

System 800xA Software 7800xA Base System ............................................................... 8

Tag Addition ........................................................................... 8

Connectivity ........................................................................... 9

Cyber Security ...................................................................... 10

System Options .................................................................... 11

System Data Publishing ........................................................ 11

Operator Workplaces ............................................................ 12

Office Workplaces ................................................................. 12

Extended Operator Workplaces ............................................. 13

Extended Operations ............................................................ 14

Batch Management .............................................................. 15

Information Management ...................................................... 16

800xA History ....................................................................... 18

Control ................................................................................. 19

Safety .................................................................................. 19

Asset Optimization ................................................................ 20

Device Management & Fieldbuses ......................................... 21

Libraries ............................................................................... 22

Localization .......................................................................... 23

System 800xA 5.1 Engineering 25Engineering .......................................................................... 26

Engineering Base System ...................................................... 27

Basic Engineering Tools ........................................................ 27

Functional Area specific Tools ............................................... 28

Safety .................................................................................. 28

IEC 61850 Engineering Tool for 800xA 5.1 ............................. 29

System 800xA Software Management Program 31Software Management .......................................................... 32

System 800xA Hardware AC 800M Controllers 35AC 800M Controllers and users guide .................................... 36

AC 800M Processor Units ..................................................... 38

AC 800M High Integrity Units ................................................ 39

Communication .................................................................... 40

Power Supply ....................................................................... 45

Mounting Rails ...................................................................... 46

Extended warranty ................................................................ 46

System 800xA Hardware S800 I/O 47S800 I/O modules – Users guide ........................................... 50

Communication .................................................................... 51

S800 I/O Modules ................................................................. 53

High Integrity I/O Modules ..................................................... 57

Module Termination Units ...................................................... 58

System 800xA Product Catalog | Contents 3

Contents

S800L I/O Modules ............................................................... 60

ModuleBus Communication Parts .......................................... 61

Power Supply ....................................................................... 63


System 800xA Hardware S900 I/O 65Redundant Termination Unit .................................................. 66

Power supply ....................................................................... 66

Communication interface ...................................................... 67

Digital I/O modules ............................................................... 67

Solenoid driver ..................................................................... 68

Relay output ......................................................................... 68

Frequency input .................................................................... 69

Analog input ......................................................................... 69

Temperature input ................................................................. 71

Analog output ....................................................................... 71

Field housing ........................................................................ 73

Compact box ....................................................................... 75

Power supply for CB220x ..................................................... 75

Accessories for S900 Remote I/O .......................................... 76


System 800xA Hardware Panel 800 79Specifications Panel 800 ....................................................... 80

Panel Builder 800 Version 6 .................................................. 81

Panel 800 ............................................................................. 81

Panel Builder 800 Version 5 .................................................. 82

Panel 800 ............................................................................. 82

Accessories .......................................................................... 84

Media and Documentation 85System 800xA - Media .......................................................... 86

Media - Office 2007 and 800xA for AC 100 5.1 ...................... 86

Library - Media ..................................................................... 87

Dongles ............................................................................... 87

User Documentation ............................................................. 88

Safety User Documentation ................................................... 91

Asset Optimization User Documentation ................................ 91

Device Management and Fieldbus User Documentation .......... 92

Network User Documentation ................................................ 92

Reference documentation ..................................................... 93

4 Topology | System 800xA Product Catalog

System 800xA Extended AutomationThe Power of Integration

WirelessHARTGateway

Variable Speed Drive

System Networks

Inte

rnet

Field Networks

PowerAutomation

ProcessElectrification

ProcessInstrumentation

BusinessSystemsSafety PLC & DCS

MotorController

AC 800MController

S800 I/O

ABB and 3rd party PLC & DCS

Mod

uleb

us

M008CAytirgetnIhgiH

rellortnoC

MO

DB

US

System Workplaces

Base SystemServers

Protection &Control IED

Panel 800

IEC

618

50

PR

OFI

BU

S /

PR

OFI

NE

T /

Mod

uleb

us /

Dev

iceN

et

PR

OFI

BU

S /

Fou

ndat

ion

Fiel

dbus

/ M

odul

ebus

S900 I/OLV Switchgear

REG670

WirelessHART

Extended Operator Workplace

CMMSERPDMSCADVideo

...

Shut-down

Fire & Gas

System 800xA Extended AutomationThe power of integration

DMZ MI Servers

Promoting collaboration Collaboration between people and systems is a necessity to increase engineering efficiency, asset utilization, energy savings, and operator effectiveness. System 800xA’s ‘xA’ stands for Extended Automation and utilizes the system architecture which was built for collaboration. System 800xA is the only automation platform that has the ability to engineer, commission, control, and operate automation strategies for process, power, electrical and safety in the same, redundant, reliable system. Also, facilitating collaboration is System 800xA’s pre-integrated applications such as a full featured historian, asset optimization and batch management.

System 800xA Product Catalog | Topology 5

System 800xA ABB’s award winning System 800xA provides you with a bet-ter way to achieve measurable productivity and profitability improvements. System 800xA extends the scope of traditional DCS systems to include all automation functions in a single operations and engineering environment; enabling your plants to perform smarter and better at substantial cost savings. System 800xA delivers extended productivity gains by:

− Reducing time to decision and action − Engineering for maximum performance − Reducing risk through high integrity automation − Integrating information for improved visibility − Improving batch production profitability, consistency, and

traceability − Optimizing plant asset availability and performance − Delivering Control and I/O to meet automation and safety

needs − Extending installed system capabilities through seamless

evolution

Embracing the principles of open, real-time networking, System 800xA provides a scalable solution that spans and in-tegrates loop, unit, area, plant, and inter plant controls. From providing a secure foundation with robust, but flexible, base level regulatory and sequence control to higher level man-agement and advanced control functions that include safety controls,batch management, maintenance management, in-formation management, and network management solutions, System 800xA meets the application needs of a wide variety of industries.

System 800xA provides you with a secure, reliable control environment with minimum effort through built-in security features such as access control, user authentication, and audit trail capability. ABB enhances secure system operations by actively participating on security standards committees, conducting threat-modeling studies, and incorporating “safe design” practices into product development.

Based upon the Aspect Object technology and a common set of hardware, System 800xA seamlessly integrates traditionally isolated DCS and Safety systems. SIS realization is achieved by either utilizing individual controllers or through dedicated applications within the same controller. With this embedded control and safety architecture, System 800xA reduces costs significantly; achieving the objectives of both systems – maxi-mum plant availability at minimum risk.

For more information about System 800xA please visit our web: www.abb.com/800xA

6 Topology | System 800xA Product Catalog

System 800xA Product Catalog | Software 7

System 800xA Software

The 800xA System software is packaged in a set of DVD’s. The system installation is supported by the Automated Instal-lation program. The Automated Installation program is a shell framework to ease the installation and configuration of your 800xA System.

Installation is never prevented due to lack of licensing, but licenses are required to unlock features for operating or engineering the system. Updates and security related soft-ware from non-ABB companies must be downloaded and installed separately, as guided from the Automated Installation program.

The Automated Installation program is supplied on the system DVD. The common part is to specify the system details of your system in the Automated Installation program System Planner and generate a unique setup package for each node (workstation) describing what should be installed from the DVDs, or a file server, onto each node, and how it should be configured.

The System 800xA Installer is installed on each node, and then the following steps are executed to install and configure your node:

− Windows configuration. − System Verifier tool. − System installation. − System configuration.

The setup-files may also reside on the file server. Windows c onfiguration configures the environment (IP address, host-name, Windows components, and Windows services) connect to the workgroup or domain. The System Verifier tool checks for the necessary 3rd party software and where installations are required.

License The central licensing system (CLS) is local to each system. Each system is ordered separately, and a separate license file is fetched for each system from the Software Factory. This also means that each system is managed individually updates and upgrades, as well as initial system installation

The software or hardware described in the document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license.

DVD Formats The 800xA software is delivered on dual layer DVDs. In most instances, DVD readers from 2004 and later will be able to read this format. In those instances where the dual layer format can not be read, the recommendation is to purchase an USB DVD reader capable of reading dual layer DVDs.

8 Software | System 800xA Product Catalog

800xA Base System

Tag Addition

800xA Base System 800xA 5.1Includes one Operator Workplace, one Engineering Workplace, AC 800M Connectivity, Redundant Aspect Server, Plant Explorer, Topology Status Viewer, Softpoint Server, Scheduler, Primary History Logs (logging of signals for operator trends for up to 3 months), 10 Asset Monitors and Diagnostics Collection. Fast log-over of users.

Article no.

800xA Base System, 800xA 5.1 3BSE061234R1

TagsAll process objects with faceplate for operator interactions counts as a tag. (Total max 120,000. Can not be mixed with redundant tags). NOTE: At pricebook release a TSA was NEEDED for a system with more than 60,000 tags. Please, check current need of a TSA in the TSA Database before ordering.

Non-redundant Tags Article no.

100 tags, non-redundant, 800xA 5.1 3BSE061235R1

1,000 tags, non-redundant, 800xA 5.1 3BSE061235R2

10,000 tags, non-redundant, 800xA 5.1 3BSE061235R3

All process objects with an operator faceplate counts as a tag. (Total max 120,000. Can not be mixed with non-redundant tags). (Enables tag access through redundant Connectivity Servers.)

Redundant Tags Article no.

100 tags, redundant, 800xA 5.1 3BSE061236R1

1,000 tags, redundant, 800xA 5.1 3BSE061236R2

10,000 tags, redundant, 800xA 5.1 3BSE061236R3

Multisystem IntegrationTags in the subscriber system in a Multisystem Integration configuration. These tags are Object with a faceplate that collects data from a provider system.Note that non-redundant Multisystem Subscriber Tags can not be mixed with Multisystem Subscriber Redundant Tags.

Tags in the subscriber system in a Multisystem Integration configuration.Note: At pricebook release this item required a TSA to be ordered.Please, check current need of a TSA in the TSA Database before ordering.

Multisystem Subscriber Tags Article no.

100 Multisystem Subscriber Tags 3BSE072204R1

1,000 Multisystem Subscriber Tags 3BSE072204R2

10,000 Multisystem Subscriber Tags 3BSE072204R3

Multisystem Subscriber Redundant Tags Article no.

100 Multisystem Subscriber Redundant Tags 3BSE072205R1

1,000 Multisystem Subscriber Redundant Tags 3BSE072205R2

10,000 Multisystem Subscriber Redundant Tags 3BSE072205R3


Connectivity

ConnectivityNote that there may be 800xA price list options that are not supported with a particular OCS controller. Please refer to the table “Available functions per Controller Connectivity” in the System Guide “Technical Data and Configuration Information”. To check what connectivity combinations that are valid, use the Project Wizard or refer to the System 800xA System Guide for information.

Article no.

800xA for Advant Master, 800xA 5.1

(One per system.)

RTA hardware needs to be ordered separately. Please refer to

pricebook 3BSE001706, Advant OCS with Master Software, for

RTA hardware.

3BSE061237R1

Advant Master Central Backup, 800xA 5.1

Backup and restore of applications for Advant Master

controllers (AC410, AC450, MP200/1, SG400) One license per

system. Requires 800xA for Advant Master.

Note: At pricebook release this item required a TSA to be

ordered. Please, check current need of a TSA in the TSA Data-

base before ordering.

3BSE070712R1

800xA for MOD 300, 800xA 5.1

(One per system.)

RTA hardware needs to be ordered separately. Please refer to

pricebook 3BSE001709, Advant OCS with MOD 300 SW, for

RTA hardware.

3BSE061238R1

800xA for Harmony, 800xA 5.1

(One per system.)

3BSE061239R1

800xA for DCI, 800xA 5.1

Connectivity to Harmony Distributed Control Unit (HDCU),

includes: Batch connectivity, VB6 and PG2 faceplates, HDCU

maintenance functions.

3BSE064196R1

800xA for AC 870P / Melody, 800xA 5.1

(Faceplates not included). (One per system.)

3BSE061240R1

PLC Connect, 800xA 5.1

(One per system.)

3BSE061242R1

PLC Connect Dial-Up, 800xA 5.1

(One per serial communication channel used with dialed

communication. PLC Connect is required. Scaled on number of

dial up lines in a system).

3BSE061243R1

800xA for Safeguard, 800xA 5.1

(One per system.) Requires also 800xA for Advant Master.

3BSE061244R1

800xA for AC 100

AC 100 conect package including Graphics Elements,

Faceplates, OPC server required to use AC 100 controllers in

800xA.

3BSE064565R1


Cyber Security

Cyber Security

Article no.

Digital Signature, 800xA 5.1

Makes it possible to digitally sign aspects to ensure that data is kept

unchanged after approval.

3BSE061250R1

Advanced Access Control, 800xA 5.1

Reauthentication, double reauthentication and inactivity logout.

3BSE061249R1

Audit Trail, 800xA 5.1

Logging of all user initiated actions in a system. e.g. Graphics

editing, Control Logic editing and start/stop of servers etc.

3BSE061248R1

800xA for Industrial Defender

Industrial Defender monitoring is updated with 800xA security

events.




3BSE068321R1

Whitelisting SE46

Whitelisting SE46 provides advanced threat protection, through

checks of executing SW on clients and servers. The number of

licenses should match the number of clients in a system.

Protection of servers are included.


ordered. Please, check current need of a TSA in the TSA

Database before ordering.

3BSE067893R1

Whitelisting Studio SE46

Configuration tool required when using Whitelisting SE46 option.

One tool needed per site using Whitelisting SE46.




3BSE067217R1


System Options

System Options

Article no.

Point of Control, 800xA 5.1

Makes it possible to transfer plant operation responsibility

between locations and persons.

3BSE061212R1

Alarm Operations, 800xA 5.1

Alarm Grouping, Alarm Shelving and Alarm Analysis.

(Alarm Hiding and Alarm Response are part of the base system)

3BSE061215R1

Alarm Help and Reports

Long term Alarm storage and analyze, Alarm system KPI

reports, e-mail distribution of reports, Alarm instruction aspects.




3BSE072022R1

SMS and e-mail Messaging, 800xA 5.1

Sending messages based on alarm and event information to user

devices such as mobile telephones, e-mail accounts and pagers.

3BSE061251R1

Calculation Engine, 800xA 5.1

Provides the ability to run mathematical calculations on any

available System 800xA aspect property or attribute.

One license per server or redundant server pair.

3BSE061252R1

10 Structured Data Logs, 800xA 5.1

Makes it possible to store data sets in a SQL DB, triggered by

the Controller. Scaled on number of Data Logs, each defining a

set of properties logged for a specific processing step.

Total max 200 Data Logs.

3BSE061253R1

Snapshot Reports, 800xA 5.1

Makes it possible to create aspects that automatically executes

a query and produces a report consisting of properties of

objects in the system.

3BSE061213R1

System Data Publishing

System Data Publishing

Article no.

800xA OPC Client Connection, 800xA 5.1

This enables third party OPC clients to connect to 800xA via the

800xA OPC server. One per external access.

3BSE061245R1

OLE-DB Real Time Data Client Connection, 800xA 5.1

Allows realtime system data to be accessed via an OLE-DB

interface. One per external access.

3BSE061246R1


Operator Workplaces

Office Workplaces

Operator Workplaces

Article no.

Operator Workplace - Additional Client, 800xA 5.1

Includes Excel based reporting aspects, MS Excel is NOT

included. Possibility to use up to two screens per workplace.

(One Operator Workplace is included with Core System so

this limit to Total-1). The total quantity of Operator Workplace-

Additional and Remote Clients, Large Operator Workplaces and

Engineering Workplaces - must not exceed 55.

3BSE061255R1

Large Operator Workplace Client, 800xA 5.1

Includes one Operator Workplace with the possibility to

use up to four screens per workplace and/or large desktop

functionality. The total quantity of Operator Workplace -

Additional and Remote Clients, Large Operator Workplaces and

Engineering Workplaces - must not exceed 55.

3BSE061257R1

Office WorkplacesSmart Client Workplaces - Includes access to system information form the office network. Includes: View Process Graphics 2 displays, Trend displays, Build/view business graphics, historic data, alarm & events analyse (H & AE analyse requires IM).

Article no.

Smart Client Workplace - Client 1-25




3BSE070899R25





3BSE070899R50





3BSE070899R100


Extended Operator Workplaces

Extended Operator Workplaces

Article no.

EOW-x2

Operator Console including motorized ergonomic desk, 1 large

screen area (3840x1080 mm (2 monitors)), 2 sets of 2 wide

screen motorized monitors, multi-client keyboard, public

speakers, directed sound shower speaker, high frequency

lighting, operator video camera, remote graphical distribution

(25 m fiber cables and interface cards).

Software included: 1 EOW Workplace, 3 Large Operator

Workplaces, 1 Video Camera Input Channel, 3 Video Clients.




3BSE070124R1

EOW-x3

Operator Console including motorized ergonomic desk, 1

large screen area (5760x1080 mm (3 monitors)), 2 sets of 3

wide screen motorized monitors, multi-client keyboard, public

speakers, directed sound shower speaker, high frequency

lighting, operator video camera, remote graphical distribution



Workplaces, 1 Video Camera Input Channel, 3 Video Clients.




3BSE070125R1

EOW-f2

Operator Console including desk, 1 large screen area

(3840x1080 mm (2 monitors)), 2 sets of 2 wide screen monitors,

multi-client keyboard, speakers, remote graphical distribution



Workplaces.




3BSE070126R1

EOW-f3

Operator Console including desk, 1 large screen area

(5760x1080 mm (3 monitors)), 2 sets of 3 wide screen monitors,

multi-client keyboard, speakers, remote graphical distribution



Workplaces.




3BSE070127R1


Extended Operations

Extended Operations

Article no.

Video Input Channel

Connection to attach a video stream from one video camera for

recording or live viewing in the system.




3BSE070134R1

Video Client

One concurrent client using video stream viewing from either

recorded or live video source.




3BSE070135R1

CAD Viewer

View CAD drawings in DXF and DWG formats store in aspects

DWG (version 13, 14, 2000, 2004, 2007, 2010) DXF(version 12,

13, 14, 2000, 2004, 2007, 2010).




3BSE072023R1


Batch Management

Batch Management

Article no.

Batch Base System, 800xA 5.1

Provides the basic server functionality for batch management.

The batch server includes 10 Batch Equipment and 2000 Batch

Procedures. 1 Batch client included.

3BSE061258R1

Redundant Batch Server Option, 800xA 5.1

Provides redundancy for the basic server functionality for batch

management. (Requires Batch Base System, 3BSE061258R1)

3BSE061259R1

Batch Management Full Client, 800xA 5.1

This Client feature provides access to Batch Management

functions. The Client feature is based upon concurrent

users, not physical workstation installation. Including SL and

SQL server licenses. Requires Operator Workplace Client

- 3BSE061255R1, 3BSE061256R1 or 3BSE061257R1; or

Engineering Workplace Client - 3BSE061342R1. Maximum 40.

One Client is included with the Batch Base System.

3BSE061260R1

Batch Schedule Interface, 800xA 5.1

This feature provides external interface to Batch Management

via the Web Service scheduling commands. Included in this

feature is the Spreadsheet Scheduling interface desktop

version, unlimited license. No need to order Simple Batch

Paramether Management if you have this feature.

3BSE061261R1

10 Additional Batch Equipment, 800xA 5.1

The number of batch equipment instances includes each piece

of equipment configured in Batch Management including both

Units and Shared Equipment Modules.

3BSE061262R1

100 Additional Batch Equipment, 800xA 5.1

The number of batch equipment instances includes each piece

of equipment configured in Batch Management including both

Units and Shared Equipment Modules.

3BSE061263R1

Batch Advanced Phase Templates, 800xA 5.1

This feature provides access to the batch advanced templates

control modules for phases, units and shared equipment

modules. For use with AC 800M controllers. Batch Phase

Control library option, includes 2000 Advanced Phases.

3BSE061264R1

Simple Batch Parameter Management - Spreadsheet

Scheduling interface desktop version

Batch spreadsheet recipe scheduling tool for desk top PC

interface to Batch Management. Supports Excel 2007 and

2010. XP or Win 7, Requires Feature Pack 3.

3BSE070685R1


Basic HistorianLogging of signals for Operator trends is included in the core system for up to three months. Logging for a longer time period, archiving to external media like DVD, discs or web based Historian tools require Basic Historian Server.

Max 120,000 logs allowed in one server. (Includes archiving license, PDL, up to 12,000,000 events, MDI client and one Excel Data Access).

Article no.

Basic Historian Server, 800xA 5.1

With storage and archiving functions for:

history data, events (Message Log), and production data

(Production Data Log-PDL).

Includes Licenses for:

500 History Logs

one Multi-Display Interface (MDI) client

one Display Builder for MDI

one Desktop Trend client

one Excel Data Access

Batch reports with trending requires an additional licensed

option, see Historian Data Access Options.

3BSE061265R1

History LogsNumber of initial Information Management Hierarchical Logs in the system. Each signal to be logged counts as one log. Note: Information Management provides only Hierarchical Logs. (Total max 300,000 and max 50,000/Server.)

Article no.

100 History Logs, 800xA 5.1 3BSE061266R1

1,000 History Logs, 800xA 5.1 3BSE061267R1

15,000 History Logs, 800xA 5.1 3BSE061268R1

Dual History LogsFor parallel logging in two history servers. (Two Basic Historian Servers are required). Number of initial Information Management Hierarchical Logs in the system. Each signal to be logged counts as one log. Note: Information Management provides only Hierarchical Logs. (Total max 150,000 and max 50,000/Server.)

Article no.

100 Dual History Logs, 800xA 5.1 3BSE061269R1

1,000 Dual History Logs, 800xA 5.1 3BSE061270R1

15,000 Dual History Logs, 800xA 5.1 3BSE061271R1

Information Management


Consolidated History LogsConsolidated logs collect data from multiple History Servers and store it in a single location. This provides a common history repository for viewing and reporting. (Total max 300,000 and max 50,000/Server.)

Article no.

100 Consolidated History Logs, 800xA 5.1 3BSE061328R1

1,000 Consolidated History Logs, 800xA 5.1 3BSE061329R1

15,000 Consolidated History Logs, 800xA 5.1 3BSE061330R1

Historian Display and Reporting Options

Article no.

Display Builder for MDI - Additional Client, 800xA 5.1

Provides the ability to create MDI information displays for

desktop applications.

3BSE061331R1

Multi-Display Interface (MDI) - Additional Client, 800xA 5.1

(Max 64 per Server). Provides the ability to view MDI information

displays for desktop applications.

3BSE061332R1

Desktop Trends - Additional Client, 800xA 5.1

Provides trend viewing for desktop applications. Includes web

enabled trend display for long and short term history and stock

ticker like viewer. (Max 64 per Server).

3BSE061333R1

Historian Data Access OptionsTo access historical data through SQL from third party applications.

Batch Reports with trending requires the ODBC Server (3BSE061335R1) and ODBC Client (3BSE061336R1) option. This option provides the links necessary to connect the Oracle database (PDL) and the numeric log and process data.

Applications which utilize commercial third party reporting tools should also include the ODBC Server (3BSE061335R1) and ODBC Client (3BSE061336R1) option. The number of client connection is based on whether the applications utilizes the connection directly or indirectly. If the connection is made indirectly (using Oracle), then the client connection requires is only one. If the client connections are direct, then the number of clients should equal the number of concurrent users.

Article no.

Excel Data Access, 800xA 5.1

To access historical data through SQL from third party

applications. Used to access historical data in Excel from

non 800xA PC’s. For 800xA Client PC’s Excel Data Access is

included. (Max 64 per Server).

3BSE061334R1

ODBC Historical Data Server, 800xA 5.1

ODBC, includes third party code. (One per server.)

3BSE061335R1

ODBC Client Connection, 800xA 5.1

ODBC Clients are purchased separately from the ODBC server.

(Max 10 per ODBC Server.)

3BSE061336R1

Information Management


800xA History Signals - LogsHistory signals capable of storing actual and historic values retrieved from 800xA, Heritage ABB DCS systems and OPC sources. The signals include logging, trending, calculations and archiving. (Max 75,000 per Server node, signal storage for up to 6 data sources per Server).

Article no.

800xA History Signals - Basic 100 signals




3BSE067077R1





3BSE067077R10





3BSE067077R150

800xA Dual History Signals - LogsHistory signals for parallel logging in two history servers.The number of dual history signals should match the number of history signals

Article no.

800xA Dual History Signals - 100 signals

Note: At pricebook release a TSA was NEEDED for this item.

Please, check current need of a TSA in the TSA Database

before ordering.

3BSE073477R1




before ordering.

3BSE073477R10




before ordering.

3BSE067079R150

External Data access to 800xA History SignalsExternal access to history data via OPC and ODBC connectivity. This gives access to both, the current and the historical data. (Same size as total number of 800xA History Signals).

Article no.

Data Access to 800xA History Signals - 100 signals




3BSE067079R1





3BSE067079R10





3BSE067079R150

800xA History


Control Software LicensesThe licensing model for the Control Software Integration has changed in 800xA 5.1. Licens-ing is now scaled on installed controller capacity instead of licensing on connected signals and devices to the controllers (CLPs). This change has been made to make the calculation of required Control Software licenses easier. Each installed controller or redundant pair in the plant requires a separate Control Software license, which is ordered through the price list. The easiest way to calculate the licenses is by using the 800xA Wizard. Each controller type has its own license, where the price of it depends on the capacity of the controller.

If a Control Software license that is too small is chosen initially, it is possible to upgrade to a larger one by ordering one, or several expansion items. The 800xA Wizards helps to do the calculation in this scenario as well. Each PM type has internally a unique Controller Capacity Points figure that relates to the capacity for the controller.

While ordering the different controller licenses, the total Controller Capacity Points are au-tomatically calculated and summed up in the license. The 800xA system validates the ac-tual points count against the current license; the license will be granted as long as there are enough points in the license.

Article no.

PM851/PM851A Software License, 800xA 5.1

13 Controller Capacity Points

3BSE061897R1



3BSE061898R1



3BSE061899R1



3BSE061900R1



3BSE061901R1

PM865 Software License, 800xA 5.1


3BSE061916R1



3BSE061902R1



3BSE061903R1

Enabler for combined PA Control and Certified Safety software

Article no.

AC 800M High Integrity and Process Control, 800xA 5.1

One fixed license feature per AC 800M controller running both

non-SIL and SIL applications in the same controller.

3BSE061341R1

Control

Safety


Asset Optimization

Article no.

100 Asset Monitors, 800xA 5.1

Asset monitoring and Basic Asset Monitor Library. Each Aspect

Object being monitored by one or more asset monitors counts

as one.

3BSE061350R1

1000 Asset Monitors, 800xA 5.1

Asset monitoring and Basic Asset Monitor Library. Each Aspect

Object being monitored by one or more asset monitors counts

as one.

3BSE061351R1

Generic Heat Exchanger Asset Monitor, 800xA 5.1

It monitors the performance against standard operating

parameters independent of type of heat exchanger.

3BSE061352R1

Shell and Tube Heat Exchanger Asset Monitor, 800xA 5.1

It monitors the performance against standard operating

parameters based on the size of shell and tube heat exchanger.

3BSE061353R1

Advanced Harmony Control System Monitoring, 800xA 5.1

Enables Harmony Control Network monitors for diagnostic

monitoring, reporting, and analysis.

3BSE061354R1

100 Control Loop Asset Monitors, 800xA 5.1

Each Control Loop Asset Monitor monitors and assesses the

performance of a control loop in real-time and report significant

problems related to the controller and final control element.

The total quantity of Control Loop Asset Monitors must not

exceed 500.

3BSE061355R1






exceed 500.

3BSE064667R1






exceed 500.

3BSE064668R1

PC, Network and Software Monitoring, 800xA 5.1

Enables monitoring & supervision of IT assets.

3BSE061356R1

800xA Maximo Integration, 800xA 5.1

Enables integration into Maximo for work order management.

Application Engineering available through ConsultIT.

At pricebook release this item required a TSA to be ordered.


before ordering.

3BSE061357R1

800xA SAP / Plant Maintenance Integration, 800xA 5.1

Enables integration into SAP for work order management.

Application Engingeering available through ConsultIT.

At pricebook release this item required a TSA to be ordered.


before ordering.

3BSE061358R1

Asset Optimization


Device Management HARTFor HART devices to be accessed using Device Type Manager (DTM‘s) within System 800xA. Includes HART Device Library with generic and specific HART Device Aspect Objects incl. DTM‘s, I/O DTM for S800 and S900, HART Instruments Asset Monitor Library and OPC Server. Each HART device aspect object accessed with DTM counts as one. (Max 2500 per Connectivity Server if OPC Communication is used. For details refer to System Guide)

Article no.

100 HART Device Aspect Objects, 800xA 5.1 3BSE061359R1

1,000 HART Device Aspect Objects, 800xA 5.1 3BSE061360R1

10,000 HART Device Aspect Objects, 800xA 5.1 3BSE061361R1

HART Multiplexer Connect, 800xA 5.1

Enables HART Device Integration to connect to HART devices

using HART Multiplexers.

3BSE061362R1

Device Management FOUNDATION FieldbusFor FOUNDATION Fieldbus (FF) devices to be accessed using Fieldbus Builder FF within System 800xA. Includes FF Device Library with FF Device Aspect Objects, FF Instruments Asset Monitor L ibrary and OPC Server. Each FF device aspect object counts as one. (Max 1000 per Connectivity Server. For details refer to System Guide.)

Article no.

100 FF Device Aspect Objects, 800xA 5.1 3BSE061363R1

1,000 FF Device Aspect Objects, 800xA 5.1 3BSE061364R1

10,000 FF Device Aspect Objects, 800xA 5.1 3BSE061365R1

Device Management PROFIBUSFor PROFIBUS DP/PA devices to be accessed using Device Type Manager (DTM‘s) within System 800xA. Includes PROFIBUS Device Library with specific PROFIBUS Device Aspect Objects incl. DTM‘s, I/O DTM for S800 and S900, and PROFIBUS Instruments Asset Monitor Library. Each PROFIBUS device aspect object accessed with DTM counts as one. (Max 2500 per Connectivity Server if OPC communication is used. For details refer to System Guide.)

Article no.

100 PROFIBUS Device Aspect Objects, 800xA 5.1 3BSE061366R1

1,000 PROFIBUS Device Aspect Objects, 800xA 5.1 3BSE061367R1

10,000 PROFIBUS Device Aspect Objects, 800xA 5.1 3BSE061368R1

Device Management & Fieldbuses


Device Management & Fieldbuses

Libraries

IEC 61850 ConnectFor order of IEC 61850 related products, local organizations must comply with the Demands on the Purchaser to secure successful sales of IEC 61850 with System 800xA. Ref doc, 3BSE058798.

Article no.

IEC 61850-Ed1 Connect, 800xA 5.1

Allows clients to access data directly from electrical devices

(IEDs). Handles alarms from IEDs. Each item includes one

IEC61850 OPC server instance and IEC 61850 Substation

Operation Library with Faceplates to control substation

equipment (Bay, Breaker, Switch,...) is included.

3BSE061369R1

Redundant IEC 61850-Ed1 Connect Option, 800xA 5.1

Allows operation clients to access data and alarm and event

values from Intelligent Electronic Devices (IEDs) through

redundant Connectivity Servers.

Requires IEC 61850-Ed1 Connect. The number of Redundant

IEC 61850 OPC server instance licenses shall be less then or

equal to the number of IEC 61850 OPC server instances, when

redundancy is chosen.(max. 16 per System).

3BSE061370R1

Libraries

Article no.

INFI90 Function Code Library for AC 800M, 800xA 5.1

Requires separate media.

3BSE061211R1

MOD 300 CCF Library for AC 800M, 800xA 5.1

Requires separate media.

3BSE061210R1

TCP Communication Library License

Control functions to create TCP based communication protocols in the

AC800M controller. Once licence is needed for each controller using

the library.

Note: At pricebook release this item required a TSA to be ordered.

Please, check current need of a TSA in the TSA Database before

ordering.

3BSE070889R1

UDP Communication Library License

Control functions to create UDP based communication protocols in the

AC800M controller. Once licence is needed for each controller using

the library.



ordering.

3BSE070891R1

Machine Safety Library License Points

Control functions for machine safety applications. Same amount of

library points is needed as the summed up controller capacity points

using the library.



ordering.


Localization

National Language Support (NLS) is intended for the localization of the operator interface to the desired language. NLS contains a set of functions that are harmonized with the Windows regional settings to enable a multilingual environment for the System 800xA.

The System 800xA supports translations, mainly the operator interface and the operator manuals as shown in the Table 3 and Table 4. The translation, or System 800xA Language Package, is implemented as a system extension and is possible to install without stopping the system.

The NLS Localization Guide describes what and how localization can be performed by a project with or without an installed Language Package. The English version of the Windows operating system is required. The System 800xA Language Packages can be downloaded free of charge from ABB Library.

Language Packages

Functional Areas

Bas

e S

yste

m

Saf

ety

SM

S &

eM

ailin

g

*Ass

et

Op

timiz

atio

n

FO

UN

DAT

ION

F

IELD

BU

S

Bat

ch

Man

agem

ent

** In

form

atio

n M

anag

emen

t

* IE

C 6

1850

English (default) Yes Yes Yes Yes Yes Yes Yes Yes

Chinese Yes Yes Yes Yes Yes Yes

French Yes Yes Yes Yes

German Yes Yes Yes Yes Yes Yes Yes

Russian Yes Yes Yes

Spanish Yes Yes Yes Yes

Swedish Yes Yes Yes Yes Yes Yes

Language Packages

Connectivity

800x

A f

or

A

C 8

00M

800x

A f

or

A

dva

nt M

aste

r

PLC

C

onn

ect

800x

A f

or

M

elo

dy

English (default) Yes Yes Yes Yes

Chinese Yes Yes Yes

French Yes Yes

German Yes Yes Yes

Russian Yes Yes

Spanish Yes

Swedish Yes Yes

Table 3. Supported Language Packages for Functional Areas

Table 4. Supported Language Packages for Connectivity

* Only system messages** Storage of messages in local language


System 800xA Language Package

Article no.

System 800xA 5.1 Chinese Language Package 9ARD183928-001

System 800xA 5.1 French Language Package 9ARD183928-002

System 800xA 5.1 German Language Package 9ARD183928-003

System 800xA 5.1 Russian Language Package 9ARD183928-004

System 800xA 5.1 Spanish Language Package 9ARD183928-005

System 800xA 5.1 Swedish Language Package 9ARD183928-006

Translated Operator Manuals

Article no.

Extended Operation in Chinese 3BSE036904-510

Extended Operation in French 3BSE036904-510

Extended Operation in German 3BSE036904-510

Extended Operation in Russian 3BSE036904-510

Extended Operation in Spanish 3BSE036904-510

Extended Operation in Swedish 3BSE036904-510

Installation and Localization

Article no.

NLS installation manual 2PAA102031

NLS localization guide 2PAA101940

Localization

System 800xA Product Catalog | System 800xA 5.1 Engineering 25

System 800xA Engineering provides real-time information in-tegration for better and faster access. Working within a com-mon engineering environment, 800xA Engineering supports a consistent information flow from design, through installation and commissioning, to operation and maintenance. It lays the foundation for continuous improvements in lifecycle and operation dimensions of information flow, resulting in efficient engineering and enhanced productivity.

It provides: − A fully integrated engineering environment for development

and reuse of system standards, such as incorporating control logic, operator displays, field devices, asset monitoring, maintenance support.

− A single source of truth for all data within the system. − A comprehensive set of libraries to streamline the

engineering workflow.

System 800xA 5.1 Engineering

− Integration with CAE tools via Process Engineering Tool Integration (System 800xA Engineering PETI)

− Audit trail identifies who made a change when and where.Change Reports utilize data serialization tools

− Test and debug utilizing AC 800M Soft Controller technology

26 System 800xA 5.1 Engineering | System 800xA Product Catalog

Standard Engineering Tools

Article no.

Engineering Workplace - Additional Rich Client, 800xA 5.1

Includes Control Configuration for AC 800M, Buld Data Handling,

Graphic Configuration, Document Manager, Parameter Manager, I/O

allocation function and Script Manager Professional.

The total quantity of Operator Workplace-Additional and Remote

Clients, Large Operator Workplaces and Engineering Workplaces -

must not exceed 55.

3BSE061342R1

Advanced Engineering Workplace - Additional Rich Client

Includes one Engineering Workplace and in addition Management of

Change and Load Evaluate Go.

The total quantity of Operator Workplace-Additional and Remote

Clients, Large Operator Workplaces and Engineering Workplaces - must

not exceed 55.

THIS ITEM NEEDS A TSA TO BE ORDERED

3BSE070904R1

SoftController, 800xA 5.1

To be used with the programming tool Control Builder M. This product is

to be used as a test tool only. One license is required per SoftController.

3BSE061344R1

Professional Engineering ToolsAspect Studio and Aspect Express are not available in the price list. Please, contact your BU Area Sales Manager for quotation.

Article no.

Application Change Management

Version handling for engineering changes. Scaled by the number of

handled entities. Order in groups of 50 handled entities.



ordering.

3BSE072024R1

Reuse Assistant, 800xA 5.1

(One per client.)

3BSE061345R1

Process Engineering Tool Integration - Base for INtools, 800xA 5.1.

Supports synchronization of properties between INtools objects and

existing 800xA objects and property map definition changes. New

800xA object creation is NOT supported.

3BSE061346R1

Process Engineering Tool Integration - New Object Creation

Support for INtools, 800xA 5.1.

Supports new 800xA object creation.

3BSE061347R1

Engineering


Base System

Article no.

Base System for Engineering, 800xA 5.1

Including System for 60,000 tags, one Engineering Workplace,

one Operator Workplace, Connectivity -, System Data

Publishing - , and System Options functions.

The engineering system should not be used in production.

3BSE061375R1

Additional 60 000 Tags for Engineering, 800xA 5.1

The engineering system should not be used in production.




3BSE061375R100

Engineering Workplace - Additional Rich Client, 800xA 5.1

Includes Control Configuration for AC 800M, Buld Data

Handling, Graphic Configuration, Document Manager,

Parameter Manager, I/O allocation function and Script Manager

Professional.

3BSE061342R1

Basic Engineering ToolsAspect Studio and Aspect Express are not available in the price list. Please, contact your BU Area Sales Manager for quotation.

Article no.

Reuse Assistant, 800xA 5.1

(One per client.)

3BSE061345R1

Process Engineering Tool Integration - Base for INtools,

800xA 5.1

Supports synchronization of properties between INtools objects

and existing 800xA objects and property map definition changes.

New 800xA object creation is NOT supported.

3BSE061346R1

Process Engineering Tool Integration - New Object Creation

Support for INtools, 800xA 5.1

Supports new 800xA object creation.

3BSE061347R1

SoftController, 800xA 5.1

To be used with the programming tool Control Builder M.

This product is to be used as a test tool only.

One license is required per SoftController

3BSE061344R1

Engineering Base System

Basic Engineering Tools


Functional Area specific Tools

Article no.

Batch Management Engineering, 800xA 5.1

Including Batch Procedure, Equipment, Server, and Advanced

Phases.

3BSE061376R1

History Engineering (Information Management), 800xA 5.1

Including Basic Historian Server, History Logs, Dual History

Logs, and Consolidated History Logs.

3BSE061377R1

MDI Engineering (Information Management), 800xA 5.1

Including Display Builder for MDI Client, Multiscreen Display

Interface (MDI), Desktop Trends, and Excel Data Access

3BSE061378R1

PC, Network and Software Monitoring for Engineering

(Asset Optimization), 800xA 5.1

3BSE061379R1

HART Device Management for Engineering, 800xA 5.1 3BSE061380R1

FOUNDATION Fieldbus Device Management for

Engineering, 800xA 5.1

3BSE061381R1

PROFIBUS Device Management for Engineering, 800xA 5.1 3BSE061382R1

Enabler for combined PA Control and Certified Safety software

Article no.

AC 800M High Integrity and Process Control, 800xA 5.1

One fixed license feature per AC 800M controller running both

non-SIL and SIL applications in the same controller.

3BSE061385R1

Functional Area specific Tools

Safety


IEC 61850 Engineering Licence - Internal ABB use for project executionThis license is intended for projects delivered by ABB.This license must not been delivered to end customer.The License is a one-year license needs to be renewedon a yearly bases.This license is not tied to a specific 800xA delivery, and can be used for any number of projects in parallel as long as a valid license is available.

Article no.

IEC 61850-Ed1 Engineering Tool License for 800xA IET 4.x -

for internal use only

License for IET 4.x - Integrated Engineering Toolbox (combined

IET/CCT tool).

3BSE054252R1

One-year RenewalThe IEC 61850 Engineering Tool license has to be renewed on a yearly bases.

Article no.

IEC 61850-Ed1 Engineering Tool License for 800xA IET 4.x

Renewal - for internal use only

3BSE054535R1

IEC 61850 Enginnering Licence - End Customer use for on-site configuration changesThis license is intended for cases when the End Customer wants to make on-site configuration or communication changes. This license is on-time fee (no renewal is necessary). Delivery of an End Customer license requires an approved TSA.

Article no.

IEC 61850-Ed1 Engineering Tool License for 800xA - for

External use

Includes CCT 4.x -Communication Configuration Tool.

This version don’t support AC 800M/CI868 IEC 61850 cid-file

configuration.

3BSE054253R1

Media for Internal ABB for project executionThe engineering tool software is available on separate media or can be downloaded from ABB Library. If software installation is done the license request file can be generated and together with valid license order the license key can be receive via mail.

Article no.

IET 4.x - Integrated Engineering Toolbox for IEC 61850-Ed1

engineering

For internal Use.

Includes CCT 4.x - Communication Configuration Tool.

3BSE054539R1

Media for End Customers for on-site configuration changes

Article no.

CCT 4.x - Communication configuration Tool for IEC 61850-

Ed1 engineering

For External Use.

3BSE054927R1

IEC 61850 Engineering Tool for 800xA 5.1

For order of IEC 61850 related products, local organizations must comply with the Demands on Purchaser to secure successsfull sales of IEC 61850 with System 800xA. Ref. doc, 3BSE058798. The engineering tool is licensed on a per seat basis separate from System 800xA licenses. The license is available in two versions depending on use:- 1. ABB Internal use for project execution- 2. End Customer use for on-site configuration changes


System 800xA Product Catalog | Software Management Program 31

System 800xA Software Management Program

Automation Sentinel Program Subscription Identification ABB’s Control System software is continuously enhanced and fur-ther improved. Automation Sentinel is the software management program for our products and the easiest way to profit from these improvements. It is intended to help customers manage and maintain their system software to take advantage of the continu-ous improvements and enhancements being made to our software.

The base subscription includes access to technical support from Level 3 and R&D support organizations. This support is being pro-vided for troubleshooting of product defects and issues they encounter during the validity of the subscription. Note: These technical support services are for use during normal office hours Monday through Friday. Also included with the Sentinel subscrip-tion is a SolutionsBank subscription, that provides customers with on-line access to software and product documentation and down loads.

Before the agreement expires an Automation Sentinel renewal needs to be ordered to continue receiving maintenance updates, access to expert support resources, upgrades to new versions of the existing software, and maintain the option of evolution to 800xA in the future. These renewals are valid for a period of 12 months and run consecutively from the previous subscription. Fail-ure to renew the Sentinel subscription will cause all updates, upgrades and enhancements to our software to no longer be pro-vided to the customer. Once the subscription has expired, the options to rejoin the Automation Sentinel program is the purchase of Sentinel using the buy-in program in effect at the time or the purchase of new system software.

A valid Automation Sentinel Quotation - generated by Software Factory (SOFA) - must be submitted with all orders!

32 Software Management Program | System 800xA Product Catalog

Annual Invoicing & PaymentWhen ordering a 3 year contract with annual payments, 3 consecutive items must be selected. When ordering a 5 year contract (for Third Party Systems Evolution) with annual payments, 5 consecutive items must be selected. Example: Select 2PAA108141R1, 2PAA108141R2 and 2PAA108141R3 representing year 1, 2 & 3.

Article no.

Sentinel Points - Year 1 2PAA108141R1





Lump Sum Payment

Article no.

Sentinel Points - 3 Years Lump Sum 2PAA108142R1

Sentinel Points - 5 Years Lump Sum 2PAA108142R2

Software Management

Subscription Payment Type For 1 year orders, select the Annual invoicing option.

By selecting the lump sum option, the invoice will include the entire 3 year contract value. By selecting 3 year contracts with the annual payment option, invoices will be sent out on an annual basis. Once at the time of order, once again in 12 months time and lastly at 24 months.

System 800xA Product Catalog | Software Management Program 33

Software Management

Automation Sentinel Upgrade OrdersSelect Automation Sentinel Upgrade item to indicate upgrade of product with Automation Sentinel subscription.

Article no.

Automation Sentinel Upgrade

Automation Sentinel agreement number shall be given at

ordering.

3BSE047992R1

Panel Builder 800 Version 6, for upgrades only

Media folder with Panel Builder 800 Version 6 containing the

latest version of:

-Panel Builder 800 Version 6

-Firmware for panels

-Manuals as pdf-files

-Release Notes

-Renewed license

This item can be ordered by users with a valid Automation

Sentinel agreement for Panel Builder 800 Version 6.

3BSE069301R1

Panel Builder 800 Version 5, for upgrades only


latest version of:

-Panel Builder 800 Version 5 and Panel Tools



-Release Notes

-Renewed license

This item can be ordered by users with a valid Automation

Sentinel agreement for Panel Builder 800 Version 5.

3BSE052516R1

34 Software Management Program | System 800xA Product Catalog

System 800xA Product Catalog | AC 800M Controllers 35

CPU ModulesSeveral CPU modules are available that vary in terms of processing power, memory size, and redundancy support. Each CPU module is equipped with built in Ethernet port(s) for communication with other controllers and for interaction with operators, engineers, managers, and higher level applica-tions. These ports can be configured for redundancy for those cases where availability is of paramount importance. It is also equipped with two RS-232C ports that can be used for point-to-point communication with programming/debugging tools and with third-party systems and devices.

The SIL3-rated and IEC61508-certified, AC 800HI controller sup-ports running both process control and safety application, in the same machine.

The AC 800M controller can be configured with 800xA control builder. When configured with the 800xA control builder AC 800M becomes a tightly integrated part of the 800xA DCS.

Communication & I/O ModulesTo each CPU module, a number of communication and I/O modules can be added, for example:

− Additional RS-232C ports − PROFIBUS DP, PROFINET IO − Foundation Fieldbus HSE/H1 − DeviceNet − IEC 61850 − ABB INSUM interface − MasterBus 300 interface − MODBUS TCP − S100 I/O interface − S800L and S800 I/O modules

System 800xA Hardware AC 800M Controllers

AC 800M

PM891

AC 800M high integrity

36 AC 800M Controllers | System 800xA Product Catalog

AC 800M Controllers and users guide

CPUs / Features PM851A PM856A PM860A PM861A PM864A PM865 PM866 PM891

Processor Unit PM851K01 incl:1 PM851 CPUand required optional items

PM856K01 incl:1 PM856 CPUand requiredoptional items

PM860K01 incl:1 PM860 CPUand requiredoptional items

PM861AK01 incl:1 PM861A CPUand requiredoptional itemsPM861AK02 incl:2 PM861A CPUsand requiredoptional items

PM864AK01 incl:1 PM864A CPUand requiredoptional itemsPM864AK02 incl:2 PM864A CPUsand requiredoptional items

PM865AK01 incl: 1 PM865K01 CPU and requiredoptional itemsPM865AK02 incl: 2 PM865K02 CPUs and requiredoptional items

PM866K01 incl:1 PM866 CPU and requiredoptional itemsPM866K02 incl:2 PM866 CPUs and requiredoptional items

PM891K01 incl:1 PM891 CPU and requiredoptional itemsPM891K02 incl:2 PM891 CPUs and requiredoptional items

High Integrity Controller No No No No No Yes No No

Clock frequency 24 MHz 24 MHz 48 MHz 48 MHz 96 MHz 96 MHz 133 MHz 450 MHz

Memory (RAM) 12 MB * 16 MB * 16 MB * 16 MB 32 MB 32 MB 64 MB 256 MB

RAM available for application

6.372 MB 10.456 MB 10.457 MB 7.320 MB 23.663 MB 24.242 MB22.415 MB w SM81022.386 MB w SM811

51.402 MB 199.233 MB

CPU redundancy support No No No Yes Yes Yes Yes Yes

Communication interfaces

1 Ethernet port 2 RS-232C ports

2 Ethernet ports 2 RS-232C ports






Performance, 1000 boolean operations (a:=b and c)

0.46 ms 0.46 ms 0.23 ms 0.23 ms 0.15 ms 0.15 ms 0.09 ms 0.043 ms

Recommended Control Network backbone

100 Mbit/s - 1 Gbit/s Ethernet (IEEE 802.3)

Dimensions W 119 x H 186 x D 135 mm (4.7 x 7.3 x 5.3 in.)W 174 x H 186 x D 94 mm

Weight (including base) 1100 g (2.4 lb) 1100 g (2.4 lb) 1100 g (2.4 lb) 1200 g (2.6 lb) 1200 g (2.6 lb) 1200 g (2.6 lb) 1200 g (2.6 lb) 1600 g (3.5 lb)

Measurements

115 (25.4) 135 (5.3)

186

(7.3

)

174

186

94

CPU PM891

Environmental Data for AC 800M and S800 I/O

Climatic Operating Conditions 0 to +55 C (Storage -40 to +70C), RH = 5 to 95 % no condensation, IEC/EN 61131-2

Protection class IP20 according to EN 60529, IEC 529

Corrosive protection G3 compliant according to ISA-71.04

Electromagnetic Compatibility and CE-mark Meets EMC directive 2004/108/EC according to EN 61000-6-2 and EN 61000-6-4

Electromagnetic Emission Tested according to EN 61000-6-4 EMC – Generic Emission Standard, Part 2 – Industrial Environment

Electromagnetic Immunity Tested according to EN 61000-6-2 EMC – Generic Immunity Standard, Part 2 – Industrial Environment

Electrical Safety UL508, IEC/EN 61131-2

Hazardous Classified Locations UL/CSA 60079-15 (Class 1 Zone 2)

Hazardous Classified Locations ATEX S890 series of I/O modules: Category 3 (1) G, EEx nA [ia] IIC T4

Safety Integrity (IEC 61508) PM865, AI880A, DI880, DO880: IEC 61508 up to SIL3

* Available with 5.1 FP4 Firmware (or newer) else its 8 / 12 / 12 MB


AC 800M Processor Units

AC 800M Processor UnitsThe Tool Cable TK212A is most useful when working with AC 800M. Please order a cable (Item 3BSC630197R1) together with your first order of PM851K01, PM856K01, PM860K01, PM861AK01, PM861AK02, PM864AK01, PM864AK02, PM865K01, PM865K02, PM866K01, PM866K02, PM891K01 or PM891K02.

Article no.

PM851AK01 Processor Unit

Package including:

- PM851A, CPU

- TP830, Baseplate, width = 115 mm

- TB850, CEX-bus terminator

- TB807, ModuleBus terminator

- Battery for memory backup (4943013-6)

3BSE066485R1


Package including:

- PM856A, CPU





3BSE066490R1


Package including:

- PM860A, CPU





3BSE066495R1


Package including:

- PM861A, CPU




- TB852, RCU-Link terminator


3BSE018157R1

PM861AK02 Redundant Processor Unit

Package including:

2 pcs PM861AK01, Processor unit.

1 pcs TK850, CEX-bus expansion cable.

1 pcs TK851, RCU-Link cable.

3BSE018160R1


Package including:

- PM864A, CPU






3BSE018161R1

PM864AK02 Redundant Processor Unit

Package including:

2 pcs PM864AK01, Processor unit.



3BSE018164R1


AC 800M Processor Units

Article no.

PM866K01 Processor Unit

Package including:

- PM866, CPU






3BSE050198R1

PM866K02 Redundant Processor Units

Package including:

2 pcs PM866K01, Processor unit.



3BSE050199R1


Package including:

- PM891 CPU Module


- TB853, RCU Control Link Terminator

3BSE053241R1

PM891K02 Redundant Processor Units

Package including:

2 pcs PM891K01 Processor Unit

1 pcs TK850V007 CEX-bus Extension Cable

1 pcs TK855 RCU Data Link Cable

1 pcs TK856 RCU Control Link Cable

Please note: The BC810K02 is not included in the PM891K02

Redundant Processor Unit kit. In order to make hot replacement

of PM891 Processor Unit possible, the BC810K02 is required

and has to be ordered separately.

3BSE053242R1

SB822 Rechargeable battery unit

External DIN-rail mounted rechargeable battery unit including

lithium-ion battery, 24 V DC connector and connection cable

TK821V020. Width = 85 mm. Equivalent amount of Lithium

metal = 0,8 g (0,03 oz).

3BSE018172R1


AC 800M High Integrity Units

AC 800M High Integrity UnitsThe PM865 CPU Unit is intended for use in High Integrity systems.

Local organizations must comply with the Qualifications to secure successful sales of ABB safety systems, to order safety equipment. Ref doc, 3BSE047224.

Article no.


Package including:

- PM865, CPU






3BSE031151R1

PM865K02 Redundant Processor Unit

Package including:

2 pcs PM865K01, Processor unit.



3BSE031150R1

SM811K01 Safety CPU module kit

Collaborating safety CPU. Connects to CEX bus after BC810

CEX bus interconnection box.

Including:

- SM811, Safety Module


- TK852V10, Synchronization link cable

3BSE018173R1

SS823 Voting Device

Required in a High Integrity 800xA system. One per power

supply unit, also at redundant configurations.

3BSE038226R1

Extra BatteriesFor extra Lithium batteries (4943013-6), please refer to Business Online.


Communication

Supported Communication modules

PROFIBUS Foundation Fieldbus

RS-232 C MB300 INSUM Drivebus S100 I/O interface

GeniusTRIO I/O

Satt I/O MODBUS TCP

IEC61850

Module CI854A CI860 CI853 CI855 CI857 CI858 CI856 CI862 CI865 CI867 CI868

Protocol DP-V1 (PA via Linking Device)

HSE (H1 via Linking Device)

MODBUS master,Comli master/slave,Siemens master,User defined protocols

MB300 IEEE 802.3

ABB’s Drivebus

ABB’s S100 I/O

Genius ABB´sSatt I/O

MODBUS TCP

IEC 61850

Transmission speed 9.6 - 12,000 kbits/s

10/100 Mbits/s

75 - 19 200 b/s

10 Mbits/s,200 Datasets/s

10 Mbits/s

4 Mbits/s – 38.4 - 153.6kbit/s

- 10/100 Mbits/s(Ch1),10 Mbits/s(Ch2)

10/100 Mbits/s

Hot Swap Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes

Connectors DB female (9-pin )

RJ-45 female (8-pin)




Fiber-optic Miniribbon(36-pin)

Phoenix(4-pin)

BNC RJ-45 female (8-pin)


Measurements

186

(7.3

)

58 (2.3) 127.5 (5.0)

Communication Interface

Supported

Communication modules

AF100 PROFINET IO Ethernet/IP LD 800DN

Module CI869 CI871 CI873 Linking Device

Protocol AF100 PROFINET IO Ethernet/IP DeviceNet

Transmission speed 1,5 Mbit/s 10/100 Mbit/s 10/100 Mbit/s Up to 500 Kbit/s

Hot Swap Yes Yes Yes No

Connectors Phoenix (4-pin) RJ-45 female (8-pin) RJ-45 female (8-pin) RJ-45 female (8-pin)Terminal block (5-pin)


CommunicationNo articles, such as cables, hubs, switches etc, for Control Network are included in this price list. Please refer to Product Guide AC 800M, for recommended articles.

Serial Interfaces on TP830RS232-C interfaces for protocols COMLI, MODBUS, Siemens 3964R, the free-programmable serial protocol etc. Also for connection of engineering tool.

Article no.

TK212A Tool cable

RJ45 (male) to Dsub-9 (female), length 3 m. RJ45 8P8C plug

(with shell). Cable : UL2464 26 AWG x 8C.

3BSC630197R1

TC562 Short Distance Modem, G1 Compliant

length < 10 km. Point-to-point up to 1 km at 19200 bps.

Power 24 V d.c. Width = 55 mm.

3BSC630049R1

TK853V020 Modem Cable

Length 2 m.

Cable for connection between modem TC562 and TP830.

3BSC950201R1

Serial Communication InterfaceRS232-C interfaces for protocols COMLI, MODBUS, Siemens 3964R, the free-programmable serial protocol etc.

Article no.

CI853K01 Dual RS232-C interface

Package including:

- CI853, Communication Interface


3BSE018103R1

MODBUS TCP

Article no.

CI867K01 MODBUS TCP Interface

Package including:

- CI867 , Communication Interface

- TP867 , Baseplate, width = 60 mm

3BSE043660R1

PROFIBUS DPThe required PROFIBUS network components (Linking Devices, etc) must be ordered from price list 3BDD 013 232, PROFIBUS Network Components.

Article no.

CI854AK01 PROFIBUS DP-V1 Communication interface

Package including:

- CI854A, Communication Interface


3BSE030220R1

PROFINET IO

Article no.

CI871K01 PROFINET IO Communication Interface

Package including:


- TP867, Baseplate width = 60 mm

3BSE056767R1


Communication

FOUNDATION FieldbusThe required FOUNDATION Fieldbus network components (Linking devices, etc) must be ordered from price list 3BDD 013 231, FOUNDATION Fieldbus Network Components.

Article no.

CI860K01 FOUNDATION Fieldbus HSE Interface

Package including:



3BSE032444R1

IEC 61850For order of IEC 61850 related products, local organizations must comply with the Demands on the Purchaser to

secure successful sales of IEC 61850 with System 800xA. Ref doc, 3BSE058798.

Article no.

CI868K01 IEC61850 Communication interface

Package including:



3BSE048845R1

Ethernet/IP

Article no.

CI873K01 Ethernet/IP Communication Interface

Packaging including:


- TP867, Baseplate width = 60 mm

3BSE056899R1

LD 800DN EtherNet/IP to DeviceNet Linking Device,

G1 Compliant

Package including:

1 pcs LD 800 DN

1 pcs Installation Guide

2 pcs Termination resistors for DeviceNet, 1/4 W, 121 Ohm

May only be used with CI873 Communication Interface.

3BSC690164R1

Advant Fieldbus 100

Article no.

CI869K01 AF 100 Communication Interface

Package including:



3BSE049110R1


Communication

MasterBus 300

Article no.

CI855K01 MB 300 Dual Ethernet port interface

Package including:

- CI855, MB300 Interface Module

- TP853, Base plate

3BSE018106R1

S100 I/O Bus

Article no.

CI856K01 S100 I/O interface

Installed on DIN rail. Communication bridge between AC 800M

and S100 system. Package including:



3BSE026055R1

TRIO

Article no.

CI862K01 TRIO Interface Kit, G1 Compliant

Package including:



3BUA000037R1

CI862K02 Redundant TRIO Interface Kit with Connection

Cable, G1 Compliant

Package including:

- 2 x CI862, Communication Interface

- 2 x TP862, Baseplate, width = 60 mm

- TK862 Cable, 1 m

3BUA000111R1

Satt I/OFor SATT 19" rack I/O and S200 I/O via ControlNet. For additional Satt 19" rack I/O components, see price list 3BSE014353 (Interface) in price book 3BSE014360 (SattLine/SattCon).

Article no.

CI865K01Communication Interface Module for Satt I/O

Package including:



3BSE040795R1

INSUM

Article no.

CI857K01 INSUM Ethernet interface

Package including:



3BSE018144R1


Communication

DriveBus

Article no.

CI858K01 DriveBus Interface

Package including:



3BSE018135R1

MOD5

Article no.

CI872K01 MOD5 Communication interface

Installed on DIN rail. Communication interface between

AC 800M and MOD5 system.

Package including:

- CI872,, Communication module


3BSE051129R1

Bus Accessories

Article no.

TK850V007 CEX-Bus Extension Cable

Length = 0.7 m.

Use of TK850V007 needs TK851 as CEX-bus terminator.

3BSC950192R1

TB850 CEX-Bus Terminator

With 25-pin DB25P male connector. With screw fixing.

A TB850 CEX-Bus terminator must always be installed on the

last unit on the CEX-bus.

3BSC950193R1

TB851 CEX-Bus Terminator

With 25-pin DB25S female connector. With screw fixing.

When Communication Interface units are mounted on adjacent

DIN rails, they are connected by means of a CEX-Bus extension

cable (TK850) and terminated using a TB851 CEX-Bus

terminator.

3BSC950194R1

BC810K02 CEX-Bus Interconnection Unit

Including:

- BC810, Interconnection Unit, 2 units

- TP857, Baseplate, width = 60 mm, 2 units

- TK851, Interconnection Cable

- TB850, CEX-Bus Terminator, 2 units

3BSE031155R1

TK851V010 Connection Cable

Length = 1.0 m

Used as:

- RCU Link Cable

- BC810 Interconnection Cable

3BSC950262R1

TB852 RCU Link Terminator 3BSC950263R1

TB853 RCU Control Link Terminator 3BSE057022R1

TK855 RCU Data Link Cable

Length = 1.0 m

Used as: RCU Data Link Cable

3BSC950356R1

TK856 RCU Control Link Cable

Length = 1.0 m

Used as: RCU Control Link Cable

3BSE057021R1


Power Supply

Power Supply

Article no.

SD822Z Power Supply Device

Input 115/230 V a.c. switch selectable, output 24 V d.c., 5 A.

If redundant power application is required connect to

SS822Z Voting Unit. Width = 65 mm. DIN rail mounted.

3BSC610054R1

SD831 Power Supply Device, G2 Compliant

Input a.c. 100-240 V or d.c. 110-300 V. Output d.c. 24 V, 3 A.


SS8XX Voting unit. Width = 35 mm. DIN rail mounted.

3BSC610064R1


Input a.c. 100-120/200-240 V. Output d.c. 24 V 5 A, auto-select

input. If redundant power application is required connect to

SD8XX Voting unit. Width = 35 mm. DIN rail mounted.

3BSC610065R1


Input a.c. 100-120/200-240 V, auto-select input. Output d.c.

24 V 10 A. If redundant power application is required connect to


3BSC610066R1


Input a.c. 100-240 V or d.c. 110-300 V. Output d.c. 24 V 20 A.



3BSC610067R1

SS822Z Power Voting Unit

With dual 24 V d.c 20 A inputs, single 24 V d.c. 20 A output.

Each power input supervised. Used if redundant power supply

is required. For use with power supply SD822Z.

Width = 50 mm. DIN rail mounted.

3BSC610055R1

SS832 Voting Device, G2 Compliant

Input d.c. 24 V. Dual 24 V to single 24 V, 2 x 10 A.


3BSC610068R1

Mains Breaker Kit for DIN Rail

115/230 V a.c. with input terminals, breaker and 3 fused (6.3 A),

double output terminals, width = 102,5 mm.

3BSE022262R1


Mounting Rails

Mounting Rails

Article no.

Al-profile with DIN rail and Cable Duct for RE820, mounting

719 mm (28,3”).

DIN rail length 683 mm (26,9”).

3BSE022257R1

Al-profile with DIN Rail and Cable Duct for RM550,

mounting 592 mm (24”).


3BSE022256R1

Al-profile with DIN Rail and Cable Duct, mounting 465 mm

(19”).


3BSE022255R1

Extended warranty time on hardware for S800 I/O, S900 I/O, Fieldbus and AC 800MTerms and conditions for the supply of products from Local Division Process Automation, LBU Open Control Systems within ABB AB in Sweden is valid.

Note that the price for the Extended Warranty Time order will be calculated as a percentage of the affected S800 I/O, S900 I/O, Fieldbus and AC 800M articles in the accompanying order.Item A100 => 3% of the affected HW articles within the whole order.Item A110 => 6% of the affected HW articles within the whole order.Item A120 => 9% of the affected HW articles within the whole order.

Article no.

12 additional months warranty time - S800 I/O, S900 I/O,

Fieldbus and AC 800M

3BSE049878R1



3BSE049878R2



3BSE049878R3

Extended warranty

System 800xA Product Catalog | S800 I/O 47

S800 I/O is a comprehensive and modular process I/O system that communicates with parent controllers over industry-stan-dard field buses. Thanks to its broad connectivity it fits a wide range of process controllers from ABB and others.

By permitting installation in the field, close to sensors and actuators, S800 I/O reduces the installation cost by reducing the cost of cabling. And thanks to features such as hot swap of modules, on-line reconfiguration and redundancy options, it contributes to keeping production – and thereby profits up.

S800 I/O features include: − Comprehensive coverage − Flexible configuration and installation − Ease of set up − Reliability and accuracy − HART pass-through − Redundancy also on I/O module level − High Integrity I/O modules certified to SIL3 − High accuracy time tagging − Defined outputs at communication errors − I/O modules with Intrinsic Safety interfaces

S800L I/O is a comprehensive, distributed and modular pro-cess I/O system that communicates with parent controllers over industry-standard fieldbuses. Thanks to its broad con-nectivity it fits a wide range of process controllers from ABB and others.

With its cost-effective design and just 59 mm depth instal-lation, S800L I/O modules are the perfect choice for PLC applications. Robust mechanics, one-piece handling, easy mounting and smart connections save your time in all phases of installation. Configuration with the AC 800M controller is as easy as can be, since all necessary information is preinstalled with the Compact Control Builder. And, with the GSD file, S800L I/O can be used with any control system.

Furthermore, as S800L I/O is a subset of the comprehensive S800 I/O system with more than 8 million channels installed globally, you enjoy the same full-featured signal interfacing and high availability.

System 800xA Hardware S800 I/O

S800S800 S800L

48 S800 I/O | System 800xA Product Catalog

Digital input modules

DI810 16 channels, 2 groups of 8 channels, 24 V d.c., current sink.

DI811 16 channels, 2 groups of 8 channels, 48 V d.c., current sink.

DI814 16 channels, 2 groups of 8 channels, 24 V d.c., current source.

DI818 32 Channels, 2 groups of 16 channels, 24 V d.c., current sink.

DI820 8 channels, separate returns, 110 V d.c., 120 V a.c.

DI821 8 channels, separate returns, 220 V d.c., 230 V a.c.

DI825 With time tagging, 8 channels, separate returns, 125 V d.c.

DI828 16 Channels, separate returns, 110 V d.c, 120 V a.c. / d.c

DI830 With time tagging. 16 channels, 2 groups of 8 channels, 24 V d.c., current sink. Resolution: < 0.5 ms.

DI831 With time tagging. 16 channels, 2 groups of 8 channels, 48 V d.c., current sink. Resolution: < 0.5 ms.

DI885 With time tagging & wire-fault detection. 8 channels, common return, 24-48 V d.c., current sink. Resolution: 1 ms.

Pulse input module

DP820 2 channels, separate returns, 0.25 Hz - 1.5 MHz, signal voltage: 5 / 12 V d.c.

DP840 8 channels, extended diagnostics, wire-fault detection, current limited sensor supply, 0.5-20 kHz, 12/24 V d.c or NAMUR, common return.

Digital output modules

DO810 16 channels, 2 groups of 8 channels, 24 V, max 0.5 A d.c., transistor, current source, short-circuit-proof.

DO814 16 channels, 2 groups of 8 channels, 24 V d.c., max 0.5 A, transistor, current sink, short-circuit-proof.

DO815 8 channels, 2 groups of 4 channels, 24 V d.c., max 2 A, transistor, current source, short-circuit-proof, wire-fault detection.

DO818 32 Channels, 2 groups of 16 channels, 24 V, max 0.5 A d.c., transistor, current source, short-circuit-proof.

DO820 8 channels, separate returns, 5-250 V, max 3 A a.c./d.c., relay (N.O.).

DO821 8 channels, separate returns, 5-250 V, max 3 A a.c./d.c., relay (N.C.).

DO828 16 Channels, separate returns, 5-250 V a.c / 5-125 V d.c, max 2 A a.c./d.c., relay (N.O.).

Analog input modules

AI810 8 channels, single-ended, 0(4)-20 mA, 0(2)-10 V, 12 bits.

AI815 8 channels with HART. 0(4)..20 mA, 0(1)..5 V, 12 bit, single ended, current limited transmitter supply.

AI820 Differential inputs, 4 channels, 0(1)-5 V, ±0(2)-10 V, ±0(4)-20 mA, 14 bits + sign.

AI825 Individually galvanically isolated channels, 4 channels, ±0(2)-10 V, ±0(4)- 20 mA, 14 bits + sign.

AI830A RTD inputs, 8 channels, Pt100, Ni100, Ni120, Cu10, resistor 0-400 ohms, 14 bits, 3-wire.

AI835A TC inputs, 8 channels, (7+ ref. junction), separate returns. TC types B, C, D, E, J, K, L, N, R, S, T, U, - 30…75 mV, 15 bits.

Analog output modules

AO810V2 8 channels, common return, 0(4)-20 mA, 14 bits, load: 850 ohms (short-circuit-proof).

AO815 8 channels with HART. 4..20 mA, 12 bit, load: 750 ohms, common return, short-circuit-proof.

AO820 4 channels, individually galvanically isolated, separate returns, measuring range: ±0(2)-10 V, ±0(4)-20 mA, resolution: 12 bits + sign, load: 500 ohms (current) / 5

kohms (voltage), short-circuit-proof.

Intrinsic-safety modules

DI890 8 channels, separate returns, proximity sensors (NAMUR) or voltage-free contact., current sink, wire-fault detection.

DO890 4 channels, separate returns, load 150-5000 ohms, 11 V @ 40 mA, current source, wire-fault detection, short circuit-proof.

AI890 8 channels, single-ended, 0(4)-20 mA, 12 bits, transmitter power supply.

AI893 8 channels, TC: 7 + ref. junction, sep. returns. TC types B, C, E, J, K, L, N, R, S, T, U, -10…80 mV. RTD: Pt50-1000, Ni100-500, Cu 10-100, resistor 0-4000 W,

3-wire. 15 bits + sign.

AI895 8 channels, single-ended, 4-20 mA, 12 bits, transmitter power supply, HART pass-through.

AO890 8 channels, common return, 0(4)-20 mA, 12 bits, load: 725 ohms short-circuit-proof.

AO895 8 channels, common return, 4-20 mA, 12 bits, load: 725 ohms short-circuit-proof, HART pass-through.

Redundant modules

DI840 16 channels, common return, 24 V d.c., current sink, extended diagnostics, time-tagging, current limited sensor supply.

DP840 8 channels, common return, 0.5-20 kHz, 12/24 V d.c or NAMUR, extended diagnostics, wire-fault detection.

DO840 16 channels, common return, 24 V d.c., max. 0,5 A, transistor, current source, short-circuit-proof, extended diagnostics.

AI843 TC input, 8 channels + ref. junction. TC types: B, C, E, J, K, L, N, R, S, T, U, -30…75 mV, 16 bits, extended diagnostics.

AI845 8 channels, 12 bits, 0(4)-20 mA 0(1)-5 V, extended diagnostics, HART pass-through, current limited transmitter supply, single ended.

AO845 8 channels, 12 bits, common return, 4-20 mA, extended diagnostics, HART pass-through, 750 ohms.

High Integrity modules

AI880A 4..20 mA, 8 channels, 12 bits, SIL3, current limited transmitter supply, also 0-20 mA, single ended, extended diagnostics, HART communication.

DI880 24 V d.c., 16 channels, 24 V d.c. inputs, SIL3, time-tagging, current limited sensor supply, common return, current sink, extended diagnostics.

DO880 24 V d.c., 16 channels, 0,5 A outputs, SIL3, wire-fault detection, 24 V, transistor, current source short-circuit-proof, common return, extended

diagnostics.

SS823 Required in a High Integrity 800xA system. One per power supply unit, also at redundant configurations.

S800 I/O Modules


S800L I/O Modules

S800L modules

DI801 16 channels, 1 group, 24 V d.c., current sink.

DI802 8 channels, 110 V d.c., 150 V a.c.

DI803 8 channels, 220 V d.c., 230 V a.c.

DO801 16 channels, common return, 24 V, max 0.5 A d.c., transistor, current source, short-circuit-proof.

DO802 8 channels, 5-250 V, max 2 A a.c./d.c., relay (N.O.).

AI801 8 channels, single-ended, 0(4)-20 mA, 12 bits.

AO801 8 channels, common return, 0(4)-20 mA, 12 bits, load: less than 750 ohms.

Measurements

127.5 (5.0)84 (3.3)

162

(6.4

)

132 (5.2)120 (4.7)

110

(4.3

)

127.5 (5.0)58 (2.3)

162

(6.4

)

136

(5.4

)

86 (3.4) 58.5 (2.3)

132 (5.2)58 (2.3)

162

(6.4

)

127.5 (5.0)123 (4.8)

162

(6.4

)

132 (5.2)123 (4.8)

162

(6.4

)

132 (5.2)58 (2,3)

194

(7,6

)

Dimensions in mm (in.)

CI810 CI820, TB815 Compact I/O Redundant I/O

Intrinsic safety I/ORedundant Comm. ModulesCI801, S800L I/OExtended I/O

Environmental Data for AC 800M and S800 I/O

Climatic Operating Conditions 0 to +55 C (Storage -40 to +70C), RH=5 to 95 % no condensation, IEC/EN 61131-2

Protection class IP20 according to EN 60529, IEC 529

Corrosive protection G2 compliant according to ISA-71.04 (G3 compliant according to ISA-71.04 available on request)

Electromagnetic Compatibility and CE-mark Meets EMC directive 2004/108/EC according to EN 61000-6-2 and EN 61000-6-4

Electromagnetic Emission Tested according to EN 61000-6-4 EMC – Generic Emission Standard, Part 2 – Industrial Environment

Electromagnetic Immunity Tested according to EN 61000-6-2 EMC – Generic Immunity Standard, Part 2 – Industrial Environment

Electrical Safety UL508, IEC/EN 61131-2

Hazardous Classified Locations UL/CSA 60079-15 (Class 1 Zone 2)

Hazardous Classified Locations ATEX S890 series of I/O modules: Category 3 (1) G, EEx nA [ia] IIC T4

Safety Integrity (IEC 61508) PM865, AI880A, DI880, DO880: IEC 61508 up to SIL3


S800 I/O modules – Users guide

NA

MU

R in

put

s

Bin

ary

24 V

Bin

ary

48 V

Bin

ary

110

V

Bin

ary

230

V

Bin

ary

Rel

ay

Ana

log

Uni

po

lar

Ana

log

Bip

ola

r

Tem

per

atur

e R

TD

Tem

per

atur

e T

/C

SO

E

HA

RT

Intr

insi

c sa

fety

Red

und

ant

Hig

h in

teg

rity

I/O Features S800

Digital input modules

DI810

DI811

DI814

DI818

DI820

DI821

DI825

DI828

DI830

DI831

DI840

DI880

DI885

DI890

Digital output modules

DO810

DO814

DO815

DO818

DO820

DO821

DO828

DO840

DO880

DO890

Pulse input modules

DP820

DP840

Analog input modules

AI810

AI815

AI820

AI825

AI830A

AI835A

AI843

AI845

AI880A

AI890

AI893

AI895

Analog output modules

AO810V2

AO815

AO820

AO845

AO890

AO895

S800L modules

DI801

DI802

DI803

DO801

DO802

AI801

AO801


Communication

Field Communication InterfaceModules are compliant to ISA-S71.04 level G3, unless explicitly stated differently.

Article no.

CI801 PROFIBUS DP-V1 Communication Interface

Including: 1 pce Power Supply Connector. 1 pce TB807

Modulebus Terminator.

The basic system software loaded in CI801 does not support

the following I/O modules: DI830, DI831, DI885, AI880A, DI880

and DO880.

3BSE022366R1

CI801 Engineering kit SW1.3

Including: 1 pce CD with GSD file, Memory Maps and Release Note.

1 pce Reference Manual Memory Maps for CI801.

3BSE038540R1300

CI810B AF100 Field Comm. Interface

2*AF100 Twisted Pair Connections. Including: 1 pce Power

Supply Connector. 1 pce TB807 Modulebus Terminator

The basic system software loaded.

3BSE020520R1

CI820V1 S800 Redundant FCI

1*AF100 Modem, 0.5 FPROM, 0.5MB SRAM, 16MHz

Two CI820 must be ordered for redundancy.

One item A070 must also be ordered with this item. The basic

system software is loaded.

3BSE025255R1

CI840A PROFIBUS DP-V1 Communication Interface.

For 1+1 redundant operation.

Two CI840A and one TU847 or one TU846 must be ordered.

The basic system software loaded in CI840A does not support

the following I/O modules: DI830, DI831, DI885, AI880A, DI880,

DO880 and ABB Drives.

3BSE041882R1

CI840 Engineering kit SW 4.0

Including: 1 pce CD with GSD file, Memory Maps and Release

Notes. 1 pce Reference Manual Memory Maps for CI840.

3BSE031694R4000

TB815 Interconnection Unit

Including: 1 pce TB807 Modulebus Terminator.

Used for interconnection of two CI820.

3BSE013204R1

TU846 Module Termination Unit, MTU, for 1+1 CI840.

Support for redundant I/O.

Vertical mounting of modules. Including: 1 pce Power Supply

Connector. 2 pcs TB807 Modulebus Terminator.

3BSE022460R1

TU847 Module Termination Unit for 1+1 CI840.

Support for non-redundant I/O.

Vertical mounting of modules. Including: 1 pce Power Supply

Connector. 1 pce TB807 Modulebus Terminator.

3BSE022462R1

Extra, Front label set FCI/AC 70/TB

Sheet with 12 labels. For CI810, CI820, CI830, and TB820.

3BSC970089R1

Extra, Label set, item design. FCI/AC70/TB

Sheet with 40 labels. For CI810, CI820, CI830, and TB820.

3BSC970091R1

Mounting kit

For vertical mounting of CI801, CI840, and TB840 on a vertical

DIN rail.

3BSE040749R1

Mounting profile 1800, 2 DIN rails and 1 cable duct.

DIN rail length : 1650 mm + 210 mm (65”) + (8.3”).

3BSE049768R1

Al-profile with DIN Rail and Cable Duct, mounting 465 mm (19”).


3BSE022255R1

Al-profile with DIN Rail and Cable Duct for RM550,

mounting 592 mm (24”).


3BSE022256R1


Communication

Upgrade Kit and Tool CablesUpgrading of CI801, CI810, CI820, CI830, CI840 or CI840A to latest software version are available for download from ABB Library/Solutions Bank.Item 3BSC950004R1 is cable connecting a PC to CI810, CI820 and CI830 for download of software. Item 3BSC630197R1 is cable connecting a PC to CI840 or CI840A for download of software. CI801 requires items 3BSC630197R1 and 3BSE038407R1 for download of software

Article no.

TK527V030 Interface cable

L = 3 m. DE9 pin to DE9 socket.

For connection of CI810, CI820 and CI830 to PC.

3BSC950004R1

TK212A Tool cable



3BSC630197R1

FS801K01 Service adapter kit

Including:

1 pcs Service adapter FS801

1 pcs cable TK802

For connection of CI801 to PC. A cable TK212A is also needed.

3BSE038407R1

Advant Fieldbus 100

Article no.

TC501V150 Termination unit, 150 Ohm

For Twisted Pair cable with impedance Z=150 Ohm

Two requried per AF 100 bus segment.

3BSC550038R3

TC506 AF100 Trunk Tap

Main Trunk Cable Tap to Local Trunk Cable, Capac.Shield

Decoupling. Consist of 5 DIN-mounted screw-terminals.

3BSC840074R1

TC513V1 AF100 Twisted pair Coax Modem

Twisted pair/coax or coax/twisted pair cable Power 24V d.c.

Rated isol 50V.

3BSE018405R1

TC514V2 AF100 Twisted pair to opto repeater

Twisted pair/optical fiber. Power 24V d.c. Rated isol 50V.

3BSE013281R1

TC515V2 AF100 Twisted pair to twisted pair repeater

Twisted pair/twisted pair cable. Power 24V d.c. Rated isol 50V.

3BSE013284R1

AF100K03 Connection Kit, single

For connection of one TC513 to a coax. bus line.

3BSE006251R1


S800 I/O Modules

Analog Input Modules

Article no.

AI810 Analog input 1 x 8 ch.

0(4)..20 mA, 0..10 V, 12 Bit, single ended, 0.1%, Rated isol.

50 V. Use Module Termination Unit TU810, TU812, TU814,

TU830, TU833, TU835, TU838, TU850.

3BSE008516R1

AI815 Analog Input 1 x 8 ch. with HART

0(4)..20 mA, 0(1)..5 V, 12 bit, single ended, 0.1%, Rated isol.

50 V. Current limited transmitter power distribution.

Use Module Termination Unit TU810, TU812, TU814, TU830,

TU833, TU835, TU838, TU850.

3BSE052604R1


+/-20 mA, 0(4)...20 mA, +/-10 V, +/-5 V, 0(1)...5 V, diff., 50 V

CMV, 14 bit +sign. Rin(curr)250 Ohms, Rated isol. 50 V.

Use Module Termination Unit TU810, TU812, TU814, TU830,

TU833.

3BSE008544R1

AI825 Analog Input 4 x 1 ch. Galv. isol.

-20..20 mA, 0(4)..20 mA, -10..10 V, 0(2)..10 V, Galvanically

isolated channels. 14 Bit+sign, 0.1%, Rated isol. 250 V.

Use Module Termination Unit TU811, TU813, TU831.

3BSE036456R1

AI830A Analog input 1 x 8 ch. RTD

Pt100, Ni100/120, Cu 10, R, Rated isol. 50 V. Use Module

Termination Unit TU810, TU812, TU814, TU830, TU833.

3BSE040662R1

AI835A Analog input 8 ch. Thermocouple/mV

Rated isol. 50 V. Use Module Termination Unit TU810, TU812,

TU814, TU830, TU833.

3BSE051306R1

AI843 Analog Input, Redundant or Single 1 x 8 ch.

Termocouple/mV.

Rated isol. 50 V. Use Modules Termination Unit TU830, TU833,

TU842, TU843.

3BSE028925R1

AI845 Analog Input, Redundant or single 1 x 8 ch. HART.

0(4)..20 mA, 0(1)..5 V, 12 bit, single ended, 0.1%, Rated isol.

50 V. Current limited transmitter power distribution. Advanced

on-board diagnostics. Use Module Termination Unit TU810,

TU812, TU814, TU830, TU833, TU835, TU838, TU844, TU845.

3BSE023675R1

AI890 Analog Input 1 x 8 ch. with Intrinsic Safety Interface

0(4)...20 mA single ended 0,1%. Rated isol. 50 V. Use Module

Termination Unit TU890 or TU891.

3BSC690071R1

AI893 Analog Input 8 ch. Temp. measuring. Intrinsic Safety

Interf.

For TC and RTD sensors. Rated isol. 50 V.

Use Module Termination Unit TU890 or TU891.

3BSC690141R1

AI895 Analog Input 1 x 8 ch. with Intrinsic Safety and HART.

4...20 mA single ended 0,1%. Rated isol. 50 V. Use Module


3BSC690086R1


S800 I/O Modules

Analog Output Modules

Article no.

AO810V2 Analog Output 1 x 8 channels, 0(4)...20 mA

0(4)..20 mA, 14 bit RLmax 500/850 Ohms, Rated isolation 50 V.

Use module Termination Unit TU810, TU812, TU814, TU830 or

TU833.

3BSE038415R1

AO815 Analog Output 1 x 8 ch. with HART

4..20 mA, 12 bit, 0.1%, RLmax 750 ohm, Rated isol. 50 V.

Use Module Termination Unit TU810, TU812, TU814, TU830 or

TU833.

3BSE052605R1

AO820 Analog Output 4 x 1 ch.

+/-20 mA, 0(4)...20 mA, +/-10 V, 12 bit + sign. Indiv. isol. ch. RL

max 500 Ohms, Rated isol. 50 V. Use Module Termination Unit

TU810, TU812, TU814, TU830, TU833.

3BSE008546R1

AO845A Analog Output Redundant or single 1 x 8 ch. HART

4..20 mA, 12 bit, 0.1%, RLmax 750 ohm, Rated isol. 50 V.

Advanced on-board diagnostics. Use Module Termination Unit

TU810, TU812, TU814, TU830, TU833, TU842, TU843.

3BSE045584R1

AO890 Analog Output 1 x 8 ch. with Intrinsic Safety Interface

0(4)...20 mA 0,1%. RL max 750 ohm Rated isol. 50 V. Use

Module Termination Unit TU890 or TU891.

3BSC690072R1

AO895 Analog Output 1 x 8 ch. with Intrinsic Safety and

HART.

4...20 mA 0,1%. RL max 750 ohm Rated isol. 50 V. Use Module


3BSC690087R1


S800 I/O Modules

Digital Input Modules

Article no.

DI810 Digital Input 24 V d.c. 2 x 8 ch.

Rated isolation 50 V. Use Module Termination Unit TU810,

TU812, TU814, TU830, TU833, TU838.

3BSE008508R1

DI811 2 x 8 ch. 48 V Digital input

48 Vd.c. 2 x 8 ch, Rated isol. 50 V. Use Module Termination Unit

TU810, TU812, TU814, TU830, TU833, TU838.

3BSE008552R1

DI814 Digital Input 24 V d.c. Current Source 2 x 8 ch.


TU814, TU830, TU833, TU838.

3BUR001454R1

DI818 Digital Input 24V d.c. 32 ch

2x16 ch, Rated isol. 50V, Use Module Termination Unit TU818,

TU819, TU830.




3BSE069052R1

DI820 Digital Input, 120 V a.c.

8 x 1 ch, Rated isol. 250 V. Use Module Termination Unit TU811,

TU813, TU831.

3BSE008512R1

DI821 Digital Input 230 V a.c.


TU813, TU831.

3BSE008550R1

DI825 Digital Input 1 x 8 ch, 125 V d.c. SOE.

Individually Isolated channels, Rated isol. 250 V. Use Module

Termination Unit TU811, TU813, TU831.

3BSE036373R1

DI828 Digital Input, 120V a.c./d.c. 16 ch

16x1 ch, Rated isol. 250V, Use Module Termination Unit TU851.




3BSE069054R1

DI830 Digital Input 24 V d.c. SOE


TU812, TU814, TU830, TU833, TU838.

3BSE013210R1

DI831 Digital Input 48 V d.c., SOE.


TU812, TU814, TU830, TU833, TU838.

3BSE013212R1

DI840 Digital Input. Redundant or single, 24 V d.c., 1 x 16 ch.

Advanced On-Board diagnostics. Rated isol. 50 V. Use Module

Termination Unit TU810, TU812, TU814, TU830, TU833, TU838,

TU842, TU843.

3BSE020836R1

DI885 Digital Input 24/48 V d.c., SOE.


TU812, TU814, TU830, TU833.

3BSE013088R1

DI890 Digital Input 8 x 1 ch. with Intrinsic Safety Interface

Rated isol. 50 V. Use Module Termination Unit TU890 or TU891.

3BSC690073R1


S800 I/O Modules

Digital Output Modules

Article no.

DO810 Digital Output 24 V d.c.

2 x 8 ch. 0.5 A, Short circuit proof, Rated isol. 50 V. Use Module


3BSE008510R1

DO814 Digital Output current sinking

2 x 8 ch. 0,5 A, shortcut circuit proof, Rated isol. 50 V. Use

Module Termination Unit TU810, TU812, TU814, TU830, TU833,

TU838.

3BUR001455R1

DO815 Digital Output 24 V d.c

2 x 4 ch. 2.0 A, short circuit proof. Rated isol. 50 V. Use Module


3BSE013258R1

DO818 Digital Output 24V d.c. 32 ch

2x16 ch, 0.5A, Short circuit proof, Rated isol. 50V,

Use Module Termination Unit TU818, TU819, TU830




3BSE069053R1

DO820 Digital Output, Relay. Normal open.

8 x 1 ch, 24-230 V a.c. 3 A, cos phi > 0.4, d.c. 42 W, Rated

isol. 250 V. Use Module Termination Unit TU811, TU813, TU831,

TU836, TU837.

3BSE008514R1

DO821 Digital Output, Relay. Normal closed.

8 x 1 ch, 24-230 V a.c. 3 A, cos phi > 0.4, d.c. 42 W, Rated

isol. 250 V. Use Module Termination Unit TU811, TU813, TU831,

TU836, TU837.

3BSE013250R1

DO828 Digital Output, Relay Normally Open, 16 ch

16x1 ch, 5-250V a.c and 5-125V d.c, max 2A, Rated isol. 250V,

Use Module Termination Unit TU851




3BSE069055R1

DO840 Digital Output. Redundant or single.

24 V d.c., 0.5 A. 2 x 8 ch. Advanced On-board diagnostics.


TU814, TU830, TU833, TU842, TU843.

3BSE020838R1

DO890 Digital Output 4 x 1 ch. with Intrinsic Safety Interface

Rated isol. 50 V. Use Module Termination Unit TU890 or TU891.

3BSC690074R1

Pulse Counting Modules

Article no.

DP820 Pulse Counter RS-422, Current, 5 V, (12 V), 24 V.

2 ch. bidirectional pulse counters and frequency measurement.

1,5 MHz Rated isol 50 V. Use Module Termination Unit TU810,

TU812, TU814, TU830, TU833.

3BSE013228R1

DP840 Pulse Counter or Frequency Measurement Module.

Redundant or single.

1 x 8 ch, 20 kHz. Rated isol. 50 V. Use Module Termination Unit

TU810, TU812, TU814, TU830, TU833, TU842, TU843, TU844,

TU845.

3BSE028926R1


S800 I/O Modules

High Integrity I/O Modules

Label sets for I/O Modules

Article no.

Transparent film fronts

Set of 12 transparent plastic film fronts.

To be used with ordinary paper quality.

3BSE072159R1

White colored plastic coated paper

One sheet of size A4. Original paper quality. No need to use

transparent films.

3BSE072160R1

Yellow colored plastic coated paper

One sheet of size A4. Original paper quality. No need to use

transparent films. To be used with DI880, DO880, AI880A.

3BSE072161R1

High Integrity I/O ModulesThe modules can only be connected to AC 800M controller PM865. Direct connection to the modulebus and via the optical modulebus via TB840 (not TB820).

Article no.

AI880A High Integrity Analog Input. Single or Redundant

HART.

4..20 mA, 8 ch. Current input. HART communication. Certified

for SIL3. Requires configuration according to Safety Manual.

3BSE039293R1

DI880 High Integrity Digital Input. Single or Redundant

24 V d.c., 16 ch. 24 V d.c. inputs. Certified for SIL3. Requires

configuration according to Safety Manual.

3BSE028586R1

DO880 High Integrity Digital Output. Single or Redundant

24 V d.c., 16 ch. 0,5 A Outputs. Certified for SIL3. Requires

configuration according to Safety Manual.

3BSE028602R1

SS823 Voting Device

Required in a High Integrity 800xA system. One per power

supply unit, also at redundant configurations.

3BSE038226R1


Module Termination Units


Article no.

TU805K01 Termination Units for two or three wire

connection of DI801 and DO801

Include 10 pcs of Termination Unit TU805.

3BSE035990R1

TU810V1 Compact Module Termination Unit, MTU, 50 V.

2 x 8 signal terminals, rated isol. 50 V.

3BSE013230R1



3BSE013231R1


With 25 pin D-sub connector, rated isol. 50 V. D-sub (female)

connector is not enclosed.

3BSE013232R1

TU813 Compact Module Termination Unit, MTU, 250 V.

2 x 8 Signal terminals, Rated isol. 250 V. Detachable (pluggable)

connectors are enclosed.

3BSE036714R1


2 x 8 Signal terminals, rated isol. 50 V. Detachable (pluggable)

connectors are enclosed.

3BSE013233R1

TU818 Compact Module Termination Unit, MTU, 50V

2x16 signal terminals, Rated isol. 50V




3BSE069209R1

TU819 Compact Module Termination Unit, MTU, 50V.

With 2x25 pin D-sub connector, Rated isol. 50V, D-sub (female)

connector is not enclosed




3BSE068891R1

TU830V1 Extended Module Termination Unit, MTU, 50 V.


3BSE013234R1



3BSE013235R1

TU833 Extended Module Termination Unit, MTU, 50 V.

2 x 16 signal terminals, Rated isol. 50 V. Spring-cage terminals.

3BSE038726R1

TU834 Extended Module Termination Unit, MTU 50 V.

Used with AI880/AI880A. Rated isol. 50 V. Shunt Stick not

included.

3BSE040364R1


8 fused power outlets, 8 signal terminals, rated isol. 50 V.

3BSE013236R1


2 x 4 fused signals, 2 x 4 return terminals, 2 x 2 L 2 x 2 N

terminals, rated isol. 250 V.

3BSE013237R1


8 x 1 fused isol. signals, 8 x 1 L terminals, 2 x 6 N terminals,

rated isol. 250 V.

3BSE013238R1


2 x 4 fused transducer power outlets, 16 signal terminals, 2 x 4

return terminals, 2 x 2 L+, 2 x 2 L- terminals, rated isol. 50 V.

Module is mounted horizontally.

3BSE008572R1

TU839 Extended Module Termination Unit, 250 V.

2 x 8 signal terminals. 2 x 4 fused sensor power. Rated isol.

250 V.

3BSE046966R1




Article no.

TU842 Module Termination Unit, MTU, for redundant

applications, 50 V.

Used for AO845, DI840, DO840. Horizontal mounted DIN rail.

Rated isol. 50 V.

3BSE020850R1


applications, 50 V.

Used for AO845, DI840, DO840. Vertical mounted DIN rail.

Rated isol. 50 V.

3BSE021443R1


applications, 50 V.

Used with AI845, AI880 and DP840. Horizontal mounted DIN

rail. Rated isol. 50 V. Shunt Stick not included.

3BSE021445R1


applications, 50 V.

Used with AI845, AI880A and DP840. Vertical mounted DIN rail.

Rated isol. 50 V. Shunt Stick not included.

3BSE021447R1


2 x 8 signal terminals and 2 x 8 disconnectable current limited

sensor/transmitter outlet power terminals. Rated isol. 50 V.

3BSE050930R1

TU851 Extended Module Termination Unit, MTU, 250V

2x16 signal terminals, Rated isol. 250V.




3BSE068782R1


applications, 50V

Horizontal mounted DIN rail, used with redundnat AO, DI, DO and

DP I/O modules, with 2x25 pin D-sub connector, Rated isol. 50V.




3BSE069964R1


applications, 50V.

Horizontal mounted DIN rail, used with redundnat AI and DP I/O

modules, with 1x25 pin D-sub connector, Rated isol. 50V, Shunt

Stick not included.




3BSE069966R1

TU890 Module Termination Unit for Intrinsic Safety

applications

3 x 9 signal terminals. Rated isol. 50 V. Including wiring separator.

3BSC690075R1

TU891 Module Termination Unit for non Intrinsic Safety

applications

3 x 9 signal terminals Rated isol. 50 V.

3BSC840157R1

TY801K01 8 pcs Shunt Stick TY801

125 + 125 ohms shunt. Used for AI845 and AI880 on TU844, TU845.

3BSE023607R1

TY804K01 8 pcs Shunt Stick TY804

1000 ohms shunt. Used for DP840 on TU844, TU845.

3BSE033670R1

TY820K01 10 pcs Temperature Sensor TY 820

TY820 is a temperature sensor with a PT 100 element. Can be

used with AI835/AI835A and AI843 to measure cold junction

Temperature.

3BSE056980R1


S800L I/O Modules

Analog Input Modules

Article no.


0(4)..20 mA, 12 bit, single ended, 0.1%, Rated isol. 50 V.

3BSE020512R1

Analog Output Modules

Article no.

AO801 Analog output 1 x 8 ch.

0(4)...20 mA, 12 bit, RLmax 850 Ohm, Rated isol. 50 V.

3BSE020514R1

Digital Input Modules

Article no.

DI801 Digital Input 24 V d.c.

1 x 16 ch, Rated isol. 50 V.

3BSE020508R1

DI802 Digital Input 120 V a.c./d.c., 8 x 1 ch.

Rated isol. 250 V.

3BSE022360R1

DI803 Digital Input 230 V a.c./d.c., 8 x 1 ch.

Rated isol. 250 V.

3BSE022362R1

Digital Output Modules

Article no.

DO801 Digital Output 16 ch. 24 V d.c. 0.5 A.

Short circuit proof, Rated isol. 50 V.

3BSE020510R1

DO802 Digital Output, Relay. Normal open.

8 x 1 ch, 24-230 V, a.c. Rated isol. 250 V.

3BSE022364R1

Label sets for S800L I/O Modules

Article no.

Label Set S800L, 16 ch.

Sheet with 12 labels for 16 channels I/O modules.

3BSE019419R1

Label Set S800L, 8 ch.

Sheet with 12 labels for 8 channels I/O modules.

3BSE019419R2


ModuleBus Communication Parts

Modulebus Communication Parts

Article no.

TB805 Bus Outlet

Modulebus extension cable adaptor D-sub 25, female.

One requried per extension cable TK801.

3BSE008534R1

TB845, Dual Modulebus outlet

Modulebus extension cable adaptor two D-sub, female.

Two TK801 cables for redundancy.

3BSE021437R1

TB806 Bus Inlet

Modulebus extension cable adaptor D-sub 25, male.

One requried per extension cable TK801.

3BSE008536R1

TB846, Dual Modulebus inlet

Modulebus extension cable adaptor two D-sub, male.

Two TK801 cables for redundancy.

3BSE021439R1

TK801V003 Cable

Modulebus Extension Shielded Cable 0.3 m D-sub 25,

male-female.

3BSC950089R1

TK801V006 Cable


male-female.

3BSC950089R2

TK801V012 Cable


male-female.

3BSC950089R3

TB807 Modulebus terminator 3BSE008538R1

TB820V2 Modulebus Cluster Modem

Optical cluster modem for non redundant operation. Including:

1 pce Power Supply Connector

1 pce TB807 Modulebus Terminator.

3BSE013208R1

TB825 Optical Media Conv.

Short to long distance optical fiber conversion. For modulebus

communication up to 1000 m.

3BSE036634R1

TB826 Long range optical media converter

Short to long distance optical fiber conversion. For modulebus

communication up to 5000 m, for S800 I/O HI up to 20000 m.

3BSE061637R1

TB840A Modulebus Cluster Modem

Optical cluster modem for 1 + 1 redundant operation.

3BSE037760R1

TB810 Modulebus Optical Port

Used together with CI810, CI820, CI830.

Use with S800 I/O and ABB Drives (10 Mbits driver).

3BSE008560R1

TB811 Modulebus Optical Port, G2 Compliant

Used together with CI810, CI820, CI830.

Used with ABB Drives equipment. (5 Mbits driver).

3BSE008568R1

TB842 Modulebus Optical Port

Used together with CI801 and CI840, connected via TB806 or

TB846. (10 Mbits driver).

3BSE022464R1

TU807 Termination Unit for TB840/TB840A

Support for single modulebus I/O. Including: 1 pce TB807.

3BSE039025R1

TU840 Termination Unit for 1+1 TB840.

Support for redundant I/O.

Including:


2 pcs TB807 Modulebus Terminator

3BSE020846R1


ModuleBus Communication Parts

Modulebus Communication Parts

Article no.

TU841 Termination unit for 1+1 TB840

Support for non-redundant I/O.

Including:


1 pce TB807 Modulebus Terminator

3BSE020848R1

TU848, MTU with individual power supply for red. TB840/

TB840A

Support for dual modulebus.

Including:

2 pcs TB807

3BSE042558R1

TU849, MTU with individual power supply for red. TB840/

TB840A

Support for sing le modulebus.

Including:

1 pce TB807

3BSE042560R1

TK811V015 POF Cable, 1.5 m, Duplex.

L = 1.5 m latching duplex connector Duplex plastic fibre.

3BSC950107R1

TK811V050 POF Cable, 5 m, Duplex.

L = 5 m latching duplex connector Duplex plastic fibre.

3BSC950107R2

TK811V150 POF Cable, 15 m, Duplex.

L = 15 m latching duplex connector Duplex plastic fibre.

3BSC950107R3

TK812V015 POF Cable, 1.5 m, Simplex.

L = 1.5 m latching connector Simplex plastic fibre.

3BSC950118R1

TK812V050 POF Cable, 5 m, Simplex.

L = 5.0 m latching connector Simplex plastic fibre.

3BSC950118R2

TK812V150 POF Cable, 15 m, Simplex.

L = 15 m latching connector Simplex plastic fibre.

3BSC950118R3


Power Supply

Power Supply

Article no.

SD822Z Power Supply Device

Input 115/230 V a.c. switch selectable, output 24 V d.c., 5 A.

If redundant power application is required connect to SS822Z

Voting Unit. Width = 65 mm. DIN rail mounted.

3BSC610054R1

SS822Z Power Voting Unit

With dual 24 V d.c 20 A inputs, single 24 V d.c. 20 A output.

Each power input supervised. Used if redundant power supply

is required. For use with power supply SD822Z.


3BSC610055R1


Input a.c. 100-240 V or d.c. 110-300 V. Output d.c. 24 V 3 A. If

redundant power application is required connect to


3BSC610064R1


Input a.c. 100-120/200-240 V. Output d.c. 24 V 5 A, auto-select

input. If redundant power application is required connect to


3BSC610065R1


Input a.c. 100-120/200-240 V, auto-select input. Output d.c.

24 V 10 A. If redundant power application is required connect to


3BSC610066R1


Input a.c. 100-240 V or d.c. 110-300 V. Output d.c. 24 V 20 A.



3BSC610067R1

SS832 Voting Device, G2 Compliant

Input d.c. 24 V. Dual 24 V to single 24 V, 2 x 10 A.


3BSC610068R1




Article no.



3BSE049878R1



3BSE049878R2



3BSE049878R3

Extended warranty


The S900 remote I/O system communicates with 800xA or other controllers over PROFIBUS. Suitable for applications in the chemical, pharmaceutical, oil and gas industries, S900 I/O can be installed in hazardous areas, thereby reducing mar-shalling and wiring costs. Further maintenance savings can be achieved through S900’s extended diagnostics and the use of HART®-compliant field devices.

Three series of S900 I/O are available: − S-series for applications in Zone 1 hazardous areas − B-series for applications in Zone 2 hazardous areas − N-series for applications in non hazardous areas

Additional solutions for specific applications are available: − Field housing - for wall mounting and field mounting in

Zone 1 installations with system approval fully certified in accordance with ATEX. The high-grade steel housing is prepared for wall-mounting with facility for insulated screen rails or terminals.

− CB220 compact box - S900 in compact form (with up to 4 I/O modules). This variant is suitable for use in applications such as temperature multiplexers and solenoid valve circuits.

System 800xA Hardware S900 I/O

The S900 components are based on a passive backplane suitable for mounting on a DIN rail or directly in a sub-distri-bution board. The passive backplane includes internal bus communication, terminals for field circuits, communication, and power supply. The function modules are plugged into the backplane in their appropriate slots. The redundant backplane has two slots for power supply units, two slots for commu-nication interfaces, and 16 slots for function modules. Digital function modules have up to 8 channels, analog modules up to four. Therefore, when using a redundant backplane, 128 digital or 64 analog channels can be connected per station. In the case of the S and B series, up to ten S900 stations can be connected on a single fieldbus line.

Key S900 benefits include: − Intrinsically safe - can be installed in Zone 1 and Zone 2 areas. − Good price/performance ratio because external barriers have

been removed and costs are reduced in terms of cabling, installation, hardware, and maintenance.

− High reliability thanks to smooth automatic transfer of data and to auto-diagnostics.

− Easy configuration using either FDT/DTM or GSD files, allowing easy integration with 800xA process control systems.

− High availability of the plant thanks to redundancy and hot-swap capability of all components during operation.

Series Assembly Field devices /

signals

Hazardous area

approval

S series In Zone 1 In Zones 2, 1 and

0 (intrinsically safe

signals)

ATEX Zone 1

B series In Zone 2 In Zones 2, 1 and

0 (intrinsically safe

signals)

ATEX Zone 2

N series In safe areas In safe areas No

S900

NA

MU

R in

put

s

Bin

ary

24 V

Bin

ary

48 V

Bin

ary

110

V

Bin

ary

230

V

Bin

ary

Rel

ay

Ana

log

Uni

po

lar

Ana

log

Bip

ola

r

Tem

per

atur

e R

TD

Tem

per

atur

e T

/C

SO

E

HA

RT

Intr

insi

c sa

fety

Red

und

ant

Hig

h in

teg

rity

I/O Features S900Digital I/O modulesDX910S,B,N* S,B

Digital output modulesDO910S,B,N* S,B

DO930N Pulse input modulesDP910S,B,N* S,B

Analog input modulesAI910S,B,N* S,B

AI930S,B,N* S,B

AI931S,B,N* S,B

AI950S,B,N* S,B

Analog output modulesAO910S,B,N* S,B

AO920S,B,N* S,B

AO930S,B,N* S,B


Termination Unit

− Termination Unit for up to 16 I/O modules − Prepared for redundant system power and communication − Up to 4 terminals per channel − Preselection of fieldbus address − Prepared for certified field housing − Mounting in Zone 1 or Zone 2 possible

Name Short Description Article No.

TU921S Redundant Termination Unit (TU16R-Ex)

For 16 I/O-modules. Redundant communication and power.

(Delivery includes CD910).

3KDE175111L9210

TU921B Redundant Termination Unit (TU16R-B)



3KDE175112L9210

TU921N Redundant Termination Unit (TU16R)



3KDE175113L9210

Redundant Termination Unit

Power supply

− Powering of communication interfaces and I/O modules − Hot swap capability (SA920S in Zone 1, SA920B in Zone 2) − Redundant powering − Alarm in case of power failure (with redundancy) − Switching On by tighten the 4 switch-on interlock screws (only SA920B and SA920S)


SA920S Power Supply

For 24 V DC.

The power supply filter type BP901S is not required.

SA920S is the functional replacement for SA910S.

Do not mix SA910S with SA920S for redundancy (observe Release Notes).

3BDH000602R1

SA920B Power Supply

For 24 V DC.


SA920B is the functional replacement for SA910B

Do not mix SA910B with SA920B for redundancy (observe Release Notes).

3BDH000601R1

SA920N Power Supply

For 24 V DC.


SA920N is the functional replacement for SA910N

Do not mix SA910N with SA920N for redundancy (observe Release Notes).

3BDH000600R1

Power supply


Communication interface

− Fieldbus protocol PROFIBUS-DP V1 (EN 50170) − Coupling of the internal CAN bus to external PROFIBUS − HART protocol on PROFIBUS-DP V1 − Line or media redundancy via two coupling modules − Electrical isolation between field bus, power − Diagnosis, configuration and parameterization via PROFIBUS


CI920AS CI920AS Communication Interface V 2.1 (CIPBA-Ex)

Use only CI920AS with the same firmware for redundancy for

PROFIBUS DP-V1 (observe Release Notes).

3BDH000690R1

CI920AB CI920AB Communication Interface V 2.1 (CIPBA-B)

Use only CI920AB with the same firmware for redundancy for

PROFIBUS DP-V1 (observe Release Notes).

3BDH000691R1

Communication interface

Digital I/O modules

− Input for dry contacts or proximity switches (NAMUR) − Output for low power intrinsically safe valves − Short and break detection − Electrical isolation between input / bus and input / power − Common return for all inputs / outputs − Configurable as a mixture of inputs and outputs − 8 I/O channel, EEx ia II C


DX910S Digital Input or Output (DIO8-Ex)

Input for dry contact or NAMUR initiator.

Output for low power Intrinsic Safe valves.

3KDE175311L9100

DX910B Digital Input or Output (DIO8-B)


Output for low power I.S. valves.

3KDE175312L9100

DX910N Digital Input or Output (DIO8)


Output for low power valves.

3KDE175313L9100

Digital I/O modules


Solenoid driver

− Output for intrinsically safe valves or alarms − Integrated driving power − Short and break detection − Electrical isolation between output / bus and output / power − Electrical isolation channel to channel − 4 channels, EEx ia II C


DO910S Digital Output (DO4-Ex)

Output for intrinsic safe valves.

3KDE175321L9100

DO910B Digital Output (DO4-B)

Output for intrinsic safe valves.

3KDE175322L9100

DO910N Digital Output (DO4)

Output for valves.

3KDE175323L9100

Solenoid driver

Relay output

− Relay output for higher switching power − Output configurable as NO or NC contact − Electrical isolation between output / bus and output / power − Electrical isolation channel to channel − Configurable as 4 x changeover contact − Configurable as 6 x NO contact


DO930N Relay Output (RO6)

With 4 normally-open contacts and 2 changeover contacts (only to

use with CI920N Article No 3BDS014113).

3BDS014114

Relay output


Frequency input

− Frequency input for dry contacts or proximity switches − Short and break detection − Electrical isolation between input / bus and input / power − Frequency measurement or counting applications − 2 Function blocks − Reset via fieldbus or control input − Status outputs / Direction recognition


DP910S Frequency Input (FI2-Ex)


3KDE175361L9100

DP910B Frequency Input (FI2-B)


3KDE175362L9100

DP910N Frequency Input (FI2)


3KDE175363L9100

Frequency input

Analog input

− Power supply for 4...20 mA loop powered 2-wire transmitters − Short and break detection − Electrical isolation between input / bus and input / power − Common return for all inputs − 4 channels, EEx ia II C


AI910S Analog Input (AI4-Ex)

Transmitter power supply, 4..20 mA.

3KDE175511L9100

AI910B Analog Input (AI4-B)


3KDE175512L9100

AI910N Analog Input (AI4)


3KDE175513L9100

Analog input


Analog input, HART

− Power supply for 4...20 mA loop powered 2-wire transmitters − Short and break detection − Electrical isolation between input / bus and input / power − Common return for all inputs − 4 channels, EEx ia II C − Transmission of HART frames via the fieldbus


AI930S Analog Input, HART (AI4H-Ex)


3KDE175511L9300

AI930B Analog Input, HART (AI4H-B)


3KDE175512L9300

AI930N Analog Input, HART (AI4H)


3KDE175513L9300

Analog input

Analog input, HART

− Passive inputs for 0/4...20 mA − Short and break detection − Electrical isolation between input / bus and input / power − Common return for all inputs − 4 channels, EEx ia II C − Transmission of HART frames via the fieldbus


AI931S Analog Input, HART (AI4H-Ex)

Passive input, 0/4..20 mA.

3KDE175511L9310

AI931B Analog Input, HART (AI4H-B)


3KDE175512L9310

AI931N Analog Input, HART (AI4H)


3KDE175513L9310


Temperature input

− Pt 100, Pt 1000, Ni 100, 0...3 kOhm in 2-/3-/4-wire technique − Thermocouple Type B, E, J, K, L, N, R, S, T , U , mV − Internal or external cold junction compensation − Short and break detection − Electrical isolation between input / bus and input / power − Electrical isolation channel to channel − 4 channels, EEx ia II C


AI950S Temperature (TI4-Ex)

Pt100, Pt1000, Ni100 in 2-/3-/4-technology thermocouples type B,

E, J, K, L, N, R, S, T isolated inputs channel by channel.

3KDE175521L9500

AI950B Temperature (TI4-B)



3KDE175522L9500

AI950N Temperature (TI4)



3KDE175523L9500

Temperature input

Analog output

− Output signal 0/4...20 mA for actuators − Short and break detection − Electrical isolation between output / bus and output / power − Output with common ground − 4 channels, EEx ia II C


AO910S Analog Output (AO4-Ex)

Output 0/4...20 mA.

3KDE175531L9100

AO910B Analog Output (AO4-B)

Output 0/4...20 mA.

3KDE175532L9100

AO910N Analog Output (AO4)

Output 0/4...20 mA.

3KDE175533L9100

Analog output


Analog output, isolated

− Output signal 0/4...20 mA for actuators − Short and break detection − Electrical isolation between output / bus and output / power − Electrical isolation channel to channel − 4 channels, EEx ia II C


AO920S Analog Output, isolated (AO4I-Ex)

Output 0/4...20 mA.

Isolated outputs channel by channel.

3KDE175531L9200

AO920B Analog Output, isolated (AO4I-B)

Output 0/4...20 mA.


3KDE175532L9200

AO920N Analog Output, isolated (AO4I)

Output 0/4...20 mA.


3KDE175533L9200

Analog output

Analog output, HART

− Output signal 0/4...20 mA for actuators − Short and break detection − Electrical isolation between output / bus and output / power − Output with common ground − 4 channels, EEx ia II C − Transmission of HART frames via the fieldbus


AO930S Analog Output, HART (AO4H-Ex)

Output 0/4...20 mA.

3KDE175531L9300

AO930B Analog Output, HART (AO4H-B)

Output 0/4...20 mA.

3KDE175532L9300

AO930N Analog Output, HART (AO4H)

Output 0/4...20 mA.

3KDE175533L9300


Field housing

− Stainless steel field housing for extended Termination Unit − Prepared for wall mounting − Optional isolated shielding bar or terminals − Mounting in Zone 1 or Zone 2


FH660S - 0000 Empty field housing, without system certificate 3KDE175804L

FH660S - 0100 Field housing

Including the following components:

Termination Unit (backplane) TU921S

1 Power supply filter BP901S.

3KDE175804V0100




2 Terminals (UK10N)


3KDE175804V1100




2 Terminals (UK10N)

1 Power supply filter BP901S

1 Switch.

3KDE175804V1110




2 Power supply filters BP901S.

3KDE175804V0200




4 Terminals (UK10N)


3KDE175804V2200




4 Terminals (UK10N)

2 Power supply filters BP901S

2 Switches.

3KDE175804V2220

600

300275

Bottom view FH660S

600

Side view FH660S

540

600

600635

Front (inside) view FH660S

Field housing


Field housing


FH680S - 0000 Empty field housing, without system certificate 3KDE175811L





3KDE175811V0100




1 Power supply filter BP901S

1 Switch.

3KDE175811V0110





3KDE175811V0200




2 Power supply filters BP901S

2 Switches.

3KDE175811V0220

Accessories


S900 - BI100 Field Housing roof

Weather protection.

Fits to all field housing.

3KDE175831L1000


Compact box


CB220S Compact-Box

For power supply SA911S, communication interface CI920S and

four I/O modules S900 type S


3KDE175611L2210

CB220B Compact-Box

For power supply SA911B, communication interface CI920B and

four I/O modules S900 type B


3KDE175612L2210

CB220N Compact-Box

For power supply SA911N, communication interface CI920N and

four I/O modules S900 type N


3KDE175613L2210

Compact box

Power supply for CB220x

− Powering of communication interfaces and I/O modules − Hot swap capability (SA911S in Zone 1, SA911B in Zone 2)


SA911S Power supply for CB220S

For 24 VDC.


3KDE175611L9110

SA911B Power supply for CB220B

For 24 VDC.

The power supply filter type BP 901S is not required.

3KDE175612L9110

SA911N Power supply for CB220N

For 24 VDC.


3KDE175613L9110

Power supply for CB220x

Similar illustration


Fieldbus isolating repeater


BI913S Fieldbus isolating repeater

Separates an intrinsically safe RS485 fieldbus from a non

intrinsically safe RS485 fieldbus with bus termination

BARTEC Sekopia - 17-28S1-G121 (DIN rail) and 17-21S1-S111

(plug) mounted in DIN rail mounted housing with IP20 protection

No longer deliverable. Use BI914S as replacement.

For limited spare parts contact Orderbox Control Products

DEAPR “[email protected]”.

3KDE175831L9130

BI914S Fieldbus isolating repeater

Separates an intrinsically safe RS485 fieldbus from a non intrinsi-

cally safe RS485 fieldbus with bus termination mounted in DIN rail

mounted housing with IP20 protection.

3BDH000649R1

Ring-coupler


BI923S Ring-coupler RS485 / FO - intrinsically safe - Slave

Separates an intrinsically safe fibre optic ring from a non intrinsically

safe RS485 fieldbus.

BARTEC - 07-7311-97WP5000

Mounted in DIN rail mounted housing with IP20 protection (Slave).

3KDE175831L9230

BI924S Ring-coupler RS485 / FO intrinsically safe - Master

Separates an intrinsically safe fibre optic ring from a non

intrinsically safe RS485 fieldbus.

BARTEC - 07-7311-97WP5200

Mounted in DIN rail mounted housing with IP20 protection (Master).

3KDE175831L9240

BI933S Ring-coupler RS485 / FO

Separates an intrinsically safe fibre optic ring from an intrinsically

safe RS485 fieldbus.

Mounted in separate field housing

BARTEC - 07-3103-2512/177M (Slave).

No longer deliverable. Use BI934S as replacement.

For limited spare parts contact Orderbox Control Products

DEAPR “[email protected]”.

3KDE175831L9330

BI934S Ring-coupler RS485 / FO intrinsically safe – Slave

Separates an intrinsically safe fibre optic ring from one intrinsically

safe RS485 fieldbus segment

Mounted in separate field housing

BARTEC - 07-3103-2512/371M

Optical Plug FSMA

Replacement for BI933S

(Ready for order as from January 2010)

3BDH000674R0001

Accessories for S900 Remote I/O


Accessories


BP914S BP914S Intrinsically safe PROFIBUS-DP connector for CI920AS

and CI920AB

D-SUB Connector (color blue) for operating the intrinsically safe

PROFIBUS-DP with CI920AS and CI920AB Siemens 6ES7972-

0DA60-0XA0.

3BSE067082R1

IP920 Module housing

IP20 protection for empty slots on the termination unit.

For use in S900 S, B, and N systems.

3KDE175831L9200

IL910 Insert labels

380 pcs.

3KDE175839L9101

Software


BI992 ABB DTM S900 DP - License in combination with ABB DCS

systems only

For parameterization and configuration of the S900 station

according to FDT 1.2, for all PROFIBUS-addresses inclusive HART.

(Observe Release Notes).

3KDE175839L9920

CD910 Additional Software

CD incl. S900 Documentation, Certificates, GSD (file) ABB DTM

S900 DP.

CD-ROM will be delivered with all TU921 and CB220 deliveries.

3KDE175839L9100

Accessories for S900 Remote I/O




Article no.



3BSE049878R1



3BSE049878R2



3BSE049878R3

Extended warranty

System 800xA Product Catalog | Panel 800 79

Panel 800 is a user-friendly, intuitive and ergonomic operator panel that combines slim, space saving dimensions with a comprehensive range of advanced functions.

All panels are equipped with advanced functionality for process and equipment control, maneuvered either by function keys located next to the screen or by touching the LCD display. Combined with market leading performance and stunning graphical ability, the Panel 800 erodes the line between ordinary Operator Panels and PC based HMIs. Panel 800 is the successor after the Process Panels.

Panel 800 is designed specifically for ABB Control Network and AC 800M controllers, but thanks to the extensive driver library, the Panel 800 is compatible with most makes of PLC and ABB legacy control systems. When using it together with AC 800M, certain unique features become available, such as integrated alarm handling with the controller.

Panel 800 consists of a modern powerful hardware platform, which enables a very limited mounting depth. The frame is made of powder-coated aluminum, giving the panels a very robust look-and-feel. The front enclosure is designed to withstand demanding industrious usage according to the IP66 standard. The panels have also been certified by DNV and UL.

In December 2012, ABB launched the Panel 800 version 6 series. All Panel 800 Version 6 are developed to satisfy the demands of human-machine communication. Built-in functions such as displaying and controlling text, dynamic indication, time channels, alarm and recipe handling are included.

The Panel 800 Version 6 works primarily in an object-oriented way, making it easy to understand and use. Configuration is carried out on a PC using the Panel Builder configuration tool. The project can then be transferred and stored in the operator panel itself.

Various types of automation equipment such PLCs, servos or drives can be connected to the Panel 800 Version 6.

System 800xA Hardware Panel 800, version 5 and 6

Key panel Touch panel

80 Panel 800 | System 800xA Product Catalog

Specifications Panel 800

Specifications Panel 800Display backlight CCFL/LED backlight with dimming functionCPU 316 or 416 MHz RISC CPU (Intel Xscale)

Memory, flash 32 MB (Intel StrataFlash)Memory, RAM 64 MBFlash memory for application 12 MBReal time clock YESPower supply +24 C14 20-30 VAmbient temperature 0 ° to +50 °CRelative humidity 5 - 85 % non-condensingHousing material Powder-coated aluminiumFront side material Autotex F250 / F157 (keyboard), (PP865S in Stainless Steel 316 / 1.4401)PeripheralsSerial Ports RS422/RS485, female, 25-pin D-Sub, RS232C, male, 9-pin D-SubEthernet Shielded RJ45 10/100 Mbit/secUSB Host type A (power consumption max. 500 mA), Device type BPROFIBUS Expansion slot for PROFIBUS DPEnvironmental Data for Panel 800Climatic Operating Conditions Vertical installation: 0 ° to +50 °C

Horizontal installation: 0 ° to +40 °C Storage temperature -20 °C to +70 °C Relative humidity 5 - 85 % non-condensed

Protection class Front panel seal IP 66 Rear panel seal IP 20

Electromagnetic Compatibility and CE-mark Meets EMC directive 2004/108/ECElectromagnetic Emission Tested according to EN61000-6-4 (2007)Electromagnetic Immunity Tested according to EN61000-6-2 (2005)Electrical Safety UL508Hazardous Classified Locations UL 1604 Class I, Div 2 Groups A, B, C, D, T4Marine Certificates ABS, DNV, GL, RINA

Specifications PP820A PP826A PP836A PP846A

Display size - 5,7" 6,5" 10,4"Active area of display, W x H 127,0 x 33,8 mmResolution 240 x 64 pixels 320 x 240 pixels 640 x 480 pixels 800 x 600 pixelsInteraction type Function key Function key Function key Function keyLED 16 (2 color) 16 (2 color) 16 (2 color) 20 (2 color)Power consumption (normal/max) 0,15 A 0,3 A 0,4 A / 0,9 A 0,5 A / 1 ADimensions

Front panel, W x H x D 202 x 187 x 57 mm 275 x 168 x 57 mm 285 x 177 x 60 mm 382 x 252 x 60 mmCut-out dimensions 166 x 149 mm 240 x 130 mm 246 x 139 mm 343 x 208 mmMounting depth 57 mm 58 mm 55 mm 58 mmWeight 0,875 kg 1,11 kg 1,3 kg 2,3 kg

Specifications PP815A PP825A PP835A PP845A PP865A

Display size 3,8" 5,7" 6,5" 10,4" 15"Resolution 320 x 240 pixels 320 x 240 pixels 640 x 480 pixels 800 x 600 pixels 1024 x 768 pixelsInteraction type Resistive Touch Resistive Touch Resistive Touch Resistive Touch Resistive TouchLED - - - - -Power consumption (normal/max) 0,15 A 0,25 A 0,4 A / 0,9 A 0,5 A / 1 A 1,2 A / 1,7 ADimensions

Front panel, W x H x D 156 x 119 x 59 mm 201 x 152 x 57 mm 219 x 154 x 60 mm 302 x 228 x 60 mm 398 x 304 x 60 mmCut-out dimensions 139 x 105 mm 180 x 130 mm 189 x 138 mm 265 x 206 mm 356 x 279 mmMounting depth 57 mm 57 mm 55 mm 58 mm 60 mmWeight 0,56 kg 0,87 kg 1,1 kg 2 kg 3,7 kg

Specifications PP871 PP874 PP877

Display size 4,3" 7" 10,4"Resolution 480 x 272 pixels (16:9) 800 x 480 pixels (16:9) 640 x 480 pixels (4:3)Interaction type Resistive Touch Resistive Touch Resistive TouchLED - - -Power consumption (normal/max) 3,6 W 6,0 W 9,6 WDimensions

Front panel, W x H x D 145 x 103 x 49 mm 204 x 143 x 49 mm 280 x 228 x 51 mmCut-out dimensions 128 x 87 x 43 mm 187 x 126 x 43 mm 262 x 209 x 46 mmMounting Panel mount and VESA 50 x 50 Panel mount and VESA 75 x 75 Panel mount and VESA 75 x 75 Net weight (kg) ca. 0,5 kg ca. 0,8 kg ca. 1,5 kg


Panel 800

Touch Panels

Article no.

PP871

4,3” Touch panel.

TFT 480x272 (16:9).

Requires Panel Builder 800 Version 6 for configuration.

3BSE069270R1

PP874

7” Touch panel.

TFT 800x480 (16:9).


3BSE069271R1

PP877

10,4” Touch panel.

TFT 640x480 (4:3).


3BSE069272R1

Communication Interface for Panel 800Article no.

CB810 USB to Ethernet adapter for programming

USB to Ethernet adapter with software.

Cross over Ethernet patch cable included.

3BSE042255R1

Panel Builder 800 Version 6


Article no.



latest version of:

-Panel Builder 800 Version 6



-Release Notes

-License for one Panel Builder 800 Version 6

1 year Automation Sentinel Subscription included.

3BSE069300R1


Panel 800

Functional Key PanelsConfiguration of Panel 800 requires a Panel Builder 800.

Article no.

PP820A

240*64 pixels, graphics & text, black/white

- new CPU and power boards - no UL 1604 certification

Requires Panel Builder 800 version 5 for configuring.

To protect the front, it’s recommended to use the RX820 Key Cover.

3BSE042243R2

PP826A

5,7” TFT, 320x240 pixels, graphics & text, color

- new display, CPU and power boards - no UL 1604 certification



3BSE042244R3

PP836A





3BSE042237R2

PP846A




To protect the front, it’s recommended to use the RX846 Key Cover

3BSE042238R1



Article no.



latest version of:

-Panel Builder 800 Version 5 and Panel Tools



-Release Notes

-License for one Panel Builder 800 Version 5

1 year Automation Sentinel Subscription included.

3BSE042250R1


Panel 800

Touch PanelsConfiguration of Panel 800 requires a Panel Builder 800.

Article no.

PP815A

3,5” TFT, 320x240 pixels, graphics & text, touch, color



To protect the touch screen, it’s recommended to use the

RX815 Touch Cover.

3BSE042239R2

PP825A

5,7” TFT, 320*240 pixels, graphics & text, touch, color




RX825 Touch Cover.

3BSE042240R3

PP835A





RX835 Touch Cover.

3BSE042234R2

PP845A





RX845 Touch Cover.

3BSE042235R2

PP865A

15” TFT, 1024x768 pixels, graphics & text, touch, color




RX865 Touch Cover.

3BSE042236R2


Accessories

Connection Cables for Panel 800

Article no.

TK854V030 Programming Cable

RS232 programming cable Panel 800 <--> PC. Length 3 m.

3BSE042251R1

TK212A Tool cable



For serial communication between Panel 800 Version 5 panels

and AC 800M.

3BSC630197R1

Communication Interface for Panel 800

Article no.

CB801 PROFIBUS DP Communication Interface

PROFIBUS DP slave expansion module for Panel 800.

3BSE042245R1

CB810 USB to Ethernet adapter for programming

USB to Ethernet adapter with software. Cross over Ethernet

patch cable included.

3BSE042255R1

Miscellaneous

Article no.

RX815 Touch cover for PP815/PP815A, 1 pcs 3BSE049366R1

RX820 Key cover for PP820/PP820A, 1 pcs 3BSE049367R1








MB801V512 Compact Flash card

Expansion Compact Flash memory for Panel 800 Version 5

panels, 512 MB.

3BSE042257R1

System 800xA Product Catalog | Media and Documentation 85

Related Documentation A complete list of all documents applicable to the 800xA System is provided in Released User Documents (3BUA000263-510). This document lists applicable Release Notes and User Instructions. It is provided in PDF format and is included on the Release Notes/Documentation media provided with your system. Released User Documents are updated with each release and a new file is provided that contains all user documents applicable for that release with their applicable document number. Whenever a reference to a specific instruction is made, the instruction number is included in the reference.

Media and Documentation

86 Media and Documentation | System 800xA Product Catalog

Office 2007 Enterprise for ABB System 800xA

Article no.

Office 2007 Enterprise for ABB System 800xA

Office Enterprise 2007 suite includes Word, Excel, PowerPoint,

Outlook, Publisher, Access, InfoPath, Groove, OneNote,

Communicator, Integrated Enterprise Content Management,

Integrated Electronic Forms and Advanced Information Rights

Management and Policy Capabilities.

3BSE065594R1

800xA for AC 100 5.1 Product Box

Including: 800xA for AC 100 5.1 and AC 100 OPC Server

Version 5.1, User Documentation on media, Installation Manual,

and Mouse Pad.

3BSE064566R510

Media - Office 2007 and 800xA for AC 100 5.1

System 800xA 5.1, 32/64 bitThe articles in this section may only be selected when ordering a new 800xA system, or if the end user has a valid Automation Sentinel agreement.

Article no.

System 800xA 5.1, 32/64 bit Product Box

Including: System 800xA 5.1, 32/64 bit and User

Documentation on DVD and CD, Installation Manual and Mouse

Pad.(Can not be delivered to Embargoed Countries. See A230

or A240.)

3BSE061216R512

System 800xA 5.1, 32/64 bit Media only


Documentation on DVD and CD. (Can not be delivered to

Embargoed Countries. See A230 or A240.)

3BSE061110R512

System 800xA 5.1, 32/64 bit Product Box for T5 Countries


Documentation on DVD and CD, Installation Manual and Mouse

Pad. (For deliveries to Embargoed Countries see document

3BSE035412-512.)

3BSE061217R512

System 800xA 5.1, 32/64 bit Media only for T5 Countries


Documentation on DVD and CD. (For deliveries to Embargoed

Countries see document 3BSE035412-512.)

3BSE061111R512

System 800xA - Media


Library - Media

Article no.

INFI90 Function Code Library for AC 800M

CD/DVD Media - INFI90FCLib Latest Revision.

3BUA000936R200

MOD 300 CCF Library for AC 800M

CD/DVD Media MODCCFLib 2.1-x latest revision - Supports

System version 5.1.

3BUA000941R21

Library - Media

Dongles

Article no.

Dongle for USB Port

To be used with 800xA 5.1 Rev A and later versions.

For USB Dongle to 800xA 5.1 (no revision), 800xA 5.0, 800xA

4.1 and 800xA 3.1, please, purchase the Dongle from price

book 3BSE41710, System 800xA Expansion.

3BSE064644R1

RAINBOW SuperPro Dongle for Parallel Port 3BSE034585R1

Dongles


User Documentation

Article no.

800xA Base System Documentation

Documents included:

Manual Installation, Automated Installation, Upgrade, Network

Configuration, IEC 61850 Engineering Workflow, IEC 61850

Configuration, IEC 61850 Operation Library Substation

Equipment, PC Network and Software Monitoring Operation, PC

Network and Software Monitoring Configuration, Administration

and Security, Post Installation, Configuration, Operations,

System Planning, Site Planning, Server Node Virtualization,

Tools, Multisystem Integration, Maintenance, VideONet Connect.

3BSE071882-510

800xA for Advant Master - Connectivity Documentation

Documents included:

Advant Master Configuration, Advant Master Operation, Advant

Master Graphic Library, Advant Master Extended Graphic

Library.

3BSE071883-510

800xA for Harmony - Connectivity Documentation

Documents included:

Harmony Configuration, Harmony Operation.

3BSE071884-510

800xA for DCI - Connectivity Documentation

Documents included:

DCI Configuration, DCI Operation

3BSE071885-510

800xA for AC 870P/Melody - Connectivity Documentation

Documents included:

AC 870P/Melody Configuration, AC 870P/Melody Asset

Managament for HART devices Configuration, AC 870P/Melody

Asset Managament for HART devices Installation.

Documentation for 800xA for AC 870P / Melody - Operation

(Faceplate documentation) is not included in the product price

and can be ordered market specific via ABB Utility Automation

or ABB Process Industries.

3BSE071886-510

800xA for MOD 300 - Connectivity Documentation

Documents included:

MOD 300 Configuration, MOD 300 Operation.

3BSE071887-510

PLC Connect - Connectivity Documentation

Documents included:

PLC Connect Operation, PLC Connect Configuration.

3BSE071888-510

800xA for Safeguard - Connectivity Documentation

Documents included:

Safeguard Configuration, Safeguard Operation, Safeguard

Graphic Library.

3BSE071889-510

800xA for AC 100 - Connectivity Documentation

Documents included:

AC 100 Aspect Object Types, AC 100/AC 100 OPC Server

Installation, AC 100 OPC Server Configuration and Operation,

AC 100 Configuration and Operation.

3BSE071890-510

Operations Documentation

Documents included:

Operations Operator Workplace Configuration.

3BSE071891-510

Batch Management Documentation

Documents included:

Batch Management Operation, Batch Management

Configuration

3BSE071892-510

User DocumentationNote! User Manuals are printed on demand and delivery time expects to 15 working days.For S900 I/O documentation, please, refer to the S900 I/O and Fieldbus Network Components price book, 2PAA102823.


User Documentation

Article no.

Information Management Documentation

Documents included:

Information Management Getting Started, Information

Management Configuration, Information Management Display

Services, Information Management Data Access and Reports.

3BSE071893-510

Engineering Documentation

Documents included:

Engineering Studio, Engineering Studio Function Designer,

Engineering Studio Topology Designer, Engineering Process

Graphics, Engineering Process Graphics Migration Tool,

Engineering Process Graphics based on Visual Basic,

Engineering Aspect Studio, Engineering Aspect Express,

Engineering Process Engineering Tool Integration, Engineering

Studio Function Designer Getting Started, Engineering and

Production Environments, Engineering Programmers Guide,

Engineering Management of Change.

3BSE071894-510

AC 800M Documentation

Documents included:

AC 800M Getting Started, AC 800M Configuration, AC 800M

Planning, AC 800M Binary and Analog Handling, AC 800M

Library Object Style Guide, AC 800M OPC Server, AC 800M

Communication Protocols, AC 800M FOUNDATION Fieldbus

HSE, AC 800M PROFIBUS DP Configuration, AC 800M

PROFIBUS DP Installation, AC 800M ProfiNet IO Configuration,

AC 800M AC 800M DriveBus, AC 800M Ethernet/IP DeviceNet

Configuration, AC 800M Ethernet/IP DeviceNet Installation, AC

800M IEC 61850 Configuration, AC 800M Controller Hardware,

AC 800M Interfacing SATT I/O. Advant Fieldbus 100 User

Manual, TRIO/Genius Getting Started, TRIO/Genius.

3BSE071895-510

S800 I/O Documentation

Documents included:

S800 I/O Getting Started, S800 I/O Modules and Termination

Units, S800 I/O Fieldbus Communication Interface for

PROFIBUS DP/DP-V1, S800 I/O Modules and Termination Units

with Intrinsic Safety, S800 I/O DTM 5.3.

3BSE071896-510

S200 I/O Documentation

Documents included:

S200 I/O Hardware.

3BSE071902-510

AC 800M High Integrity Documentation

Documents included:

Safety Manual AC 800M High Integrity, AC 800M Protection

Library for Machine Safety User and Safety Manual.

3BSE071897-510

Asset Optimization Documentation

Documents included:

Asset Optimization Configuration, Asset Optimization Operation.

3BSE071898-510

Device Management and Fieldbus Documentation

Documents included:

Device Management Device Library Wizard

3BSE071899-510



User Documentation

Article no.

Device Management FOUNDATION Fieldbus Documentation

Documents included:

Device Management FOUNDATION Fieldbus Configuration.

3BSE071900-510

Device Management PROFIBUS and HART Documentation

Documents included:

Device Management PROFIBUS and HART Configuration,

Device Management Basic PROFIBUS DTM 5.3, Device

Management Basic HART DTM 5.2, Device Management

PROFIBUS DTM Builder 5.3, Device Management HART DTM

Builder 5.2, HART Pass Through.

3BSE071901-510



Safety User Documentation

Article no.

System 800xA Safety 5.1 AC 800M High Integrity Safety

Manual

To be used with System 800xA version 5.1

3BNP004865-510

System 800xA Safety 5.1 AC 800M High Integrity Safety

Manual

To be used with System 800xA version 5.1 Rev A.

3BNP004865-511

Safety User Documentation

Asset Optimization User Documentation

Article no.

System 800xA Asset Optimization 5.1 Configuration 3BUA000118-510

System 800xA Asset Optimization 5.1 Operation 3BUA000150-510

System 800xA 5.1 PC, Network and Software Monitoring

Operation

3BUA000446-510

System 800xA 5.1 PC, Network and Software Monitoring

Configuration

3BUA000447-510

Asset Optimization User Documentation


Device Management and Fieldbus

Article no.

System 800xA Device Management 5.1 Device Library

Wizard

2PAA102573-510

Device Management FOUNDATION Fieldbus

Article no.

System 800xA Device Management 5.1 FOUNDATION

Fieldbus Configuration

3BDD012902-510

Device Management PROFIBUS & HART

Article no.

System 800xA Device Management 5.1 PROFIBUS and

HART Configuration

3BDD011934-510

Device Management Basic PROFIBUS DTM 5.3 3BDD011938-510

Device Management Basic HART DTM 5.2 3BDD011939-510

Device Management PROFIBUS DTM Builder 5.3 3BDD011945-510

Device Management HART DTM Builder 5.2 3BDD011946-510

Device Management and Fieldbus User Documentation

FOUNDATION Fieldbus Network Components

Article no.

Media CD-ROM LD 800HSE Version 3.2, English

Documentation in pdf-format, tools, capabilities file, and

bitmaps for LD 800HSE.

3BDD011678R0401

Media CD-ROM LD 800HSE Version 3.3.0, English

Documentation in pdf-format, tools, capabilities file, and

bitmaps for LD 800HSE.

3BDD011678R0501

Printed User Instructions LD 800HSE Version 3.2, English

Describes in detail the FOUNDATION Fieldbus Linking Device LD

800HSE features, hardware installation, configuration, and diagnostics.

3BDD011677R0401

Printed User Instructions LD 800HSE Version 3.3.0, English

Describes in detail the FOUNDATION Fieldbus Linking Device LD

800HSE features, hardware installation, configuration, and diagnostics.

3BDD011677R0501

Network User Documentation


Reference documentation

Release NotesThis table lists the Release Notes and applicable document numbers that are released for use with 800xA System Version 5.1.

Functional Area Document number.

800xA System System 800xA 5.1 Release

Notes Fixed problems

2PAA106187-510

System 800xA 5.1 Release

Notes New functions and

known problems

2PAA106188-510

This document includes listings of the Release Notes and User Instructions applicable for 800xA System Version 5.1. The listings include the title of the document and the corresponding document number. The documents are grouped by functional areas within the system and by Release Notes and User Instructions.

For more information about System 800xA please visit our web: www.abb.com/800xA

User InstructionsThis table lists the User Instructions and associated document numbers that are released for use with 800xA System Version 5.1.

Functional Area Document title Document number.

System 800xA System 800xA 5.1 Tools 2PAA101888-510

System 800xA 5.1

Configuration

3BDS011222-510

System 800xA 5.1 Network

Configuration

3BSE034463-510

System 800xA 5.1 Installation 3BSE034678-510

System 800xA 5.1 Automated

Installation

3BSE034679-510

System 800xA 5.1 Upgrade 3BSE036342-510

System 800xA 5.1 Multisystem

Integration

3BSE037076-510

System 800xA 5.1

Administration and Security

3BSE037410-510

System 800xA 5.1 System

Planning

3BSE041389-510

System 800xA 5.1

Maintenance

3BSE046784-510

System 800xA 5.1 Post

Installation

3BUA000156-510

System 800xA 5.1 Site

Planning

3BUA000258-510

System 800xA 5.1 Server

Node Virtualization

3BSE056141-510

System Guide System 800xA 5.1 System

Guide Functional Description

3BSE038018-510

System 800xA 5.1 System

Guide Technical Data and

Configuration

3BSE041434-510




Asset Optimization System 800xA Asset

Optimization 5.1 Configuration

3BUA000118-510

System 800xA Asset

Optimization 5.1 Operation

3BUA000150-510

PC, Network, and Software

Monitoring

System 800xA 5.1 PC,

Network, and Software

Monitoring Operation

3BUA000446-510

System 800xA 5.1 PC,

Network, and Software

Monitoring Configuration

3BUA000447-510

AC800M AC 800M 5.0 SP2, 5.1

AC 800M DriveBus

3AFE68237432D E

AC 800M Foundation Fieldbus

HSE

3BDD012903-510

AC 800M 5.0, 5.1 PROFIBUS

DP Installation

3BDS009029R5001 A

AC 800M 5.1 Communication

Protocols

3BSE035982-510

AC 800M 5.1 OPC Server 3BSE035983-510

AC 800M 5.1 Controller

Hardware

3BSE036351-510

AC 800M 5.0, 5.1 Interfacing

SATT I/O

3BSE042821R5001

AC 800M 5.1 Library Object

Style Guide

3BSE042835-510

AC 800M 5.1 IEC 61850

Configuration

9ARD171385-510

AC 800M 5.1 PROFINET IO

Configuration

3BDS021515-510

AC 800M 5.1 Ethernet/IP

DeviceNet Configuration

9ARD000014-510

AC 800M 5.1 Ethernet/IP

DeviceNet Installation

9ARD000015-510

Control System 800xA Control 5.1

AC 800M Configuration

3BSE035980-510

System 800xA Control 5.1

AC 800M Binary and Analog

Handling

3BSE035981-510


AC 800M Getting Started

3BSE041880-510


AC 800M Planning

3BSE043732-510

Advant Fieldbus 100 User

Manual

3BSE000506-510




Device Management System 800xA Device

Management 5.1 Device

Library Wizard

2PAA102573-510

System 800xA Device

Management 5.1

FOUNDATION Fieldbus

Configuration

3BDD012902-510

System 800xA Device

Management 5.1 PROFIBUS

and HART Configuration

3BDD011934-510

Device Management Basic

PROFIBUS DTM 5.3

3BDD011938-510

Device Management Basic

HART DTM 5.2

3BDD011939-510

Field IT - Linking Device

Integration Pepperl+Fuchs

Power Hub

2PAA102122R0201

Device Management

PROFIBUS DP/FMS

Redundancy Link Module,

RLM01

3BDD011600R0601 A

Device Management

FOUNDATION Fieldbus Linking

Device, LD 800HSE 3.4.0/0

3BDD011677R0601

Device Management

PROFIBUS DTM Builder 5.3

3BDD011945-510

Device Management HART

DTM Builder 5.2

3BDD011946-510

System 800xA Engineering System 800xA Engineering 5.1

Engineering Studio

3BDS011223-510

System 800xA Engineering 5.1

Engineering Studio Function

Designer

3BDS011224-510


Engineering Studio Function

Designer Getting Started

3BDS100968-510


Process Graphics based on

Visual Basic

3BSE030335-510


Aspect Studio

3BSE032792-510


Aspect Express

3BSE032793-510


Engineering and Production

Environments

3BSE045030-510


Engineering Studio Topology

Designer

3BDS011225-510


Process Graphics

3BSE049230-510


Process Graphics Migration Tool

3BSE049231-510




IEC 61850 System 800xA IEC 61850 5.1

Engineering Workflow

9ARD171384-510

System 800xA IEC 61850 5.1

Configuration

9ARD171387-510

Information Management System 800xA Information

Management 5.1 Getting

Started

3BUF001091-510

System 800xA Information

Management 5.1 Configuration

3BUF001092-510


Management 5.1 Display

Services

3BUF001093-510


Management 5.1 Data Access

and Reports

3BUF001094-510

I/O S900 I/O DTM 3.0.x 3BDD010407R0201 A

S900 I/O S- and N-System

with SA920 Installation

3BDD010421R0401 A

S900 I/O PROFIBUS DP

Communication Interface,

CI920 1.4

3BDD010422R0301 A

S900 I/O Digital I/O Modules

DO910 and DX910

3BDD010423R0201 A

S900 I/O Frequency Input/

Pulse Counter DP910N/

DP910S

3BDD010424R0201 A

S900 I/O Analog I/O Modules

(HART) AI930, AI931, AO930

3BDD010425R0201 A

S900 I/O Temperature Input

AI950

3BDD010426R0201 A

S900 I/O B-System with

SA920 Installation

3BDD010432R0401 A

S900 I/O PROFIBUS DP

Communication Interface,

CI920 1.5

3BDD015031R0101 A

S900 I/O Digital I/O Relay

Module DO930N

3BDD010435R0201 A

S800 I/O Getting Started 3BSE020923-510

S800 I/O Modules and

Termination Units

3BSE020924-510

S800 I/O Fieldbus

Communication Interface for

PROFIBUS DP/DPV1

3BSE020926-510

S800 I/O Modules and

Termination Units with Intrinsic

Safety Interface

3BSE020927-510

S200 I/O Hardware 3BSE021356R4101 A

S200L I/O Hardware 3BSE021357R4101 A

System 800xA Operations System 800xA Operations

5.1 Operator Workplace

Configuration

3BSE030322-510

System 800xA Operations 5.1 3BSE036904-510




PLC Connect System 800xA 5.1 PLC

Connect Operation

3BSE035040-510

System 800xA 5.1 PLC

Connect Configuration

3BSE035041-510

Batch Management System 800xA Batch

Management 5.1 Operation

3BUA000145-510

System 800xA Batch

Management 5.1 Configuration

3BUA000146-510

800xA for . . . Advant Master 800xA for Advant Master 5.1

Extended Graphic Library

3BSE026427-510

800xA for Advant Master 5.1

Configuration

3BSE030340-510


Operation

3BSE030352-510


Graphic Library

3BSE030430-510

Harmony 800xA for Harmony 5.1

Configuration

3BUA000157-510

800xA for Harmony 5.1

Operation

3BUA000158-510

Melody 800xA for AC870P / Melody

5.1 Configuration

3BDD011741-510

MOD 300 800xA for MOD 300 5.1

Configuration

3BUR002417-510

800xA for MOD 300 5.1

Operation

3BUR002418-510

Safeguard 800xA for Safeguard 5.1

Configuration

3BNP004848-510

800xA for Safeguard 5.1

Operation

3BNP004849-510

800xA for Safeguard 5.1

Graphic Library

3BSE044423-510

TRIO/Genius 800xA for TRIO/Genius 5.1

Getting Started

3BUR002459-510

800xA for TRIO/Genius 5.1 3BUR002460-510

98 IEC 61850 Engineering Tool for 800xA 5.1 | System 800xA Product Catalog

System 800xA Product Catalog | IEC 61850 Engineering Tool for 800xA 5.1 99

3BS

E06

2937

en

EJu

ne 2

013

Contact us

ABB AB Control TechnologiesVästerås, SwedenPhone: +46 (0) 21 32 50 00E-mail: [email protected]/controlsystems

ABB Automation GmbH Control TechnologiesMannheim, GermanyPhone: +49 1805 26 67 76E-mail: [email protected]/controlsystems

ABB S.P.A.Control TechnologiesSesto San Giovanni (MI), ItalyPhone: +39 02 24147 555E-mail: [email protected]/controlsystems

ABB Inc. Control TechnologiesWickliffe, Ohio, USAPhone: +1 440 585 8500E-mail: [email protected]/controlsystems

ABB Pte Ltd Control TechnologiesSingaporePhone: +65 6776 5711E-mail: [email protected]/controlsystems

ABB Automation LLCControl TechnologiesAbu Dhabi, United Arab EmiratesPhone: +971 (0) 2 4938 000E-mail: [email protected]/controlsystems

ABB China Ltd Control TechnologiesBeijing, ChinaPhone: +86 (0) 10 84566688-2193www.abb.com/controlsystems

Note: We reserve the right to make technical changes to the products or modify the contents of this docu-ment without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not assume any responsibility for any errors or incomplete information in this document.

We reserve all rights to this document and the items and images it contains. The reproduction, disclosure to third parties or the use of the content of this document – including parts thereof – are prohibited without ABB’s prior written permission.

Copyright© 2013 ABB All rights reserved

800xA is a registered or pending trademark of ABB.All rights to other trademarks reside with their respective owners.