7/31/2019 T Card Upgrading Instruction for Smart Phone

1/6

T card upgrading instruction for smart phone

(Universal for android smart phone)

Computer and system requirements:

Computer processor: Pentium500 MHz or more

RAM: 128 MB or more

Disk space: 500 MB or more

Supported operating system:Windows2000 / XPVista

USB connector: USB1.0 and above connector

Cautions:

The software version and documentation in this document are just for reference only, please

use the provided version to do software download, be sure to update the software version of each

faulty mobile phone to the latest one. Only the same version and low version of handset can be

upgraded to high version.

The detail cautions:

1) Before you begin

a) The users need to back up the phonebook, messages and all user information of mobile phone;

b) Please check whether the mobile phone can be normally switched on/off, otherwise, it may not

be able to download normally;

c) Please take out the SIM card from mobile phone to check whether the folder name of

softvVrsion copied to T card is in accordance with image folder;

d) Please check whether the power of mobile phone is enough (2 cells more), if the power is not

enough, please charge the mobile phone until the power is enough;

2) Do not interrupt software download in the process, such action may cause powering on

failure.

Operating steps

1. Acquire the SD card upgrade packagea) ASC: Please directly contact the local after-sales manager, then after-sales manager will

issue the package after applied for it on SUPPPORT website;

b) The end users: Use Customer service R&D department provided T-card upgrading version

which has been packed well and can be directly used. The data manager will put it on

Support website to provide for users to download by themselves via automatically issuing.

7/31/2019 T Card Upgrading Instruction for Smart Phone

2/6

2. Create a image folder on the somewhere of computer, then you need to acquire the SD

upgrading package by the above described way, and copy image.bin file to image folder;

3. Copy the whole image folder to the root directory of T card as following (just forreference only);

4. You can check whether the files in T card are normal via Filer. Clickfilersdcardimage

7/31/2019 T Card Upgrading Instruction for Smart Phone

3/6

7/31/2019 T Card Upgrading Instruction for Smart Phone

4/6

7/31/2019 T Card Upgrading Instruction for Smart Phone

5/6

6. Click system updates to access the following interface;

7. Click storage card updates to access following interface, and please confirm the softwareversion has already been in the specific directory of SD card, then click OK;

7/31/2019 T Card Upgrading Instruction for Smart Phone

6/6

8. The mobile phone will automatically restart;

9. The mobile phone will directly access upgrade interface after restarted;

The mobile phone will restart again after finished upgrading, and then you can normally use the

mobile phone after the restart is completed.

Then the SD card upgrading of smart phone is totally completed