GSeries

Our branch intersections are reinforced against stress and breakage to a degree never before available in a PVC sewer fitting. This means the weakest point of competitors’ fittings is just another strong point in Plastic Trends’ fittings.

Form #0280 Rev. 2/06See available configurations on the opposite side of this sheet.

F I T T I N G S

Sci

ence

•

Technology • Innovatio

nSTI

SDR 35 PVC STI™ Gasketed Sewer FittingsInjection Molded in Sizes 4” – 12”(Fabricated sizes 15” - 36” are available)

Features•4”-6”reducingbrancheson8”,10”and12”fittingshaveaminimum

wallthicknessofSDR18.•ExtendedPre-AlignmentEntrance.•PVCOne-PieceInjectionMolded.•HighPerformanceGasket.•GenerouslyBlendedBranchIntersections.•SquarePipeStop.•SpeciallyFormedRaceway.•HeavyDutySupportatBranchIntersections.•RoundedEdgestoMinimizeStressPoints.

ApplicationsSTI™GasketedSewerfittingsareintendedfornon-pressuredrainageofsewageandsurfacewater.

The Next GenerationSTI™fittingsarethenextgenerationofstrengthandqualityingasketedsewerfittings.Theycombinethelatestinresearchanddevelopment,optimizingthebestoftoday’sScience,TechnologyandInnovation.

Triple Certification ListingSTI™fittingsaretheonlyfittingsintheindustrywithtriplecertificationlisting.TheyarethirdpartytestedandlistedbyNSF,UPCandCSAtomeetspecificationsdefinedinASTMD3034,ASTMF1336andCSAB182.2,whereapplicable.

New FeaturesAone-pieceintegralbellandanextendedpre-alignmententranceaidsinproperalignmentofpipeandfittings.Inadditiontoscientificallyformulatedresins,squarepipestopsresistpipepush-throughwhileextraheavysupportisprovidedunderthepipestopatbranchintersectionsforaddedstrength.

Setting The StandardAstheonlymanufacturertoofferacompletenewlineofinnovativegasketedtooling,PlasticTrendssetsthestandardforPVCfittingsproducedintheindustry.STI™gasketedsewerfittingsrepresentthelatestevolutioninPTI’scontinuousefforttoofferthemosttechnologicallyadvancedfittingsavailable.Ifyouspecify,distributeorinstallgasketedsewerfittings,demandthemostadvancedfittingsavailable,STI™.

Plastic Trends supplies the only fittings with Triple Certification listing

GSeries

TEEGxGxG

TEEGxSxG

TEE W/DWV BRANCHGxGxDWV H

SANITARY TEEGxGxG

SANITARY TEE GxSxG

WYEGxGxG

WYEGxSxG

WYE W/DWV BRANCHGxGxDWV H

COMBO WYE & 1/8 BENDGxGxG

DOUBLE WYEGxGxGxG

DOUBLE WYEGxSxGxG

2-WAY CLEANOUTGxGxG

2-WAY CLEANOUT (DWV)G x G x DWV G

CAPG

SPIGOT PLUGS

TEMPORARY PLUGS

REPAIR COUPLINGGxG

STOP COUPLINGGxG

CONCENTRIC INC. COUPLINGGxG

ECCENTRIC INC. COUPLINGGxG

CONCENTRIC INC. BUSHINGSxG

ECCENTRIC INC. BUSHINGSxG

ADAPTERSWR S x DWV G

DWV ADAPTER SLEEVEDWV S x SWR G

RISER ADAPTERSxS

DWV ADAPTERSWR G x DWV G

ADAPTERSWR S x SWR G

ADAPTERSWR H x SWR G

SW ADAPTERSWR S x DWV G

DWV ADAPTERSWR S x DWV H

DWV ADAPTERSWR H x DWV G

ADAPTERSWR S x SWR H

1/4 BENDGxG

1/4 BENDGxS

1/4 BEND LONGGxG

1/4 BEND LONGGxS

1/8 BENDGxG

1/8 BENDGxS

1/16 BENDGxG

1/16 BENDGxS

Plastic Trends, Inc.56400 Mound Road

Shelby Twp., MI 48316586.781.2700 • 800.232.5690

Fax: 586.781.0888www.plastictrends.com

SDR 35 PVC STI™ Gasketed Sewer FittingsInjection Molded in Sizes 4” – 12”Fabricated in Sizes 15” – 36”

For additional configurations, list prices and dimensional drawings visit www.plastictrends.com

Configurations Available

IN-LINE BACKWATER VALVEGxG

TERMINAL BACKWATER VALVEGxG

Short Form Specifications4”through12”injectionmoldedgasketedSDR35sewerfittingsshallbemanufacturedinaccordancewithASTMD3034,ASTMF1336,andCSAB182.2.TheyshallbeinjectionmoldedfromvirginPVCcompoundhavingacellclassificationof12454or13343inaccordancewith,andcertifiedbytheNationalSanitationFoundation(NSF),tomeetASTMD1784.GasketsshallbemanufacturedinaccordancewithASTMF477orASTMF913.Gasketsshallbefirmlyseatedinfittinginordertoensureproperinstallationandtopreventdislocationormisalignmentduringsystemassembly.GasketjointsmustcomplywithASTMD3212InternalPressureTest(exfiltration)andVacuumTest(infiltration)at5degreesofgasketjointdeflection.

Whereavailable,reducingbranchesoninjectionmolded8”,10”,and12”tees,wyes,andtee-wyesshallbeminimumDR18wallthicknessinthereducingbranchbodyandreducingbranchhubbelowthegasketrace.

GasketedSDR35sewerfittingsshallbecertifiedbytheNationalSanitationFoundation(NSF)and,inapplicableconfigurations,bytheInternationalAssociationOfPlumbingAndMunicipalOfficials(IAPMO)tomeetASTMD3034,andbytheCanadianStandardsAssociation(CSA)tomeetCSAB182.2.

Triple Certified Listing