Upload
pamela-pan
View
120
Download
7
Embed Size (px)
Citation preview
YOUR PARTNER
OF VALVE & CONTROLS
T Series Pneumatic
Actuator’s
Introduction
YOUR PARTNER
OF VALVE & CONTROLS
Actuator
Rack & Pinion type Model 032- 400 The largest cylinder
diameter is 400mm / 7754Nm(5bar)
YOUR PARTNER
OF VALVE & CONTROLS
Cylinders
Aluminum alloy stretch formed
Body hardness is ≥ 80HB
Shaft holes and piston hole machined as the same process by CNC machining center to assure the Geometric Tolerance (deviation below 0.05mm)
The roughness of holes after machining is below Ra0.8um
YOUR PARTNER
OF VALVE & CONTROLS
Cylinder Surface Treatment
Inner surface roughness is Ra0.6um-0.7um after vibration grinding Hardness after hard anodized of cylinder surface is ≥280HB The thickness of oxidation film: Light color: 25um, Dark color: 45um Extra Option: PTFE coating for body & cap, the actuator is able to
offer excellent resistance to most corrosive chemicals( such as acid, alkali) as well as corrosive industry atmospheres.
YOUR PARTNER
OF VALVE & CONTROLS
Spring
The spring’s material is imported piano wire(SWPB)
Pre-pressed spring insured the safety safer assembly / disassembly
Surface finished by catachresis for corrosion proof
Spring force decay less than 8%after 1,000,000 times life cycle
YOUR PARTNER
OF VALVE & CONTROLS
Die Casting Piston
New design pattern, tooth surface finish 0.02mm
Tooth bottom enhanced with circular arc transition
Ribs beside the tooth also enhance the strength
Surface finished by oxidation for corrosion proof
Fixed once to ensure the concentricity when machining
YOUR PARTNER
OF VALVE & CONTROLS
Pinion Shaft
Material is # 45 steel Cold stamping for bottom
square Surface is plated with nickel
YOUR PARTNER
OF VALVE & CONTROLS
Advance Equipment & Processing Technology
CNC MC with 4 axis for body machining
YOUR PARTNER
OF VALVE & CONTROLS
Body Machining
Advanced processing technology,Shaft holes and piston hole machined as the same process by CNC machining center to assure the Geometric Tolerance.
YOUR PARTNER
OF VALVE & CONTROLS
Leakage Test
Leakage test must be done for every actuator
YOUR PARTNER
OF VALVE & CONTROLS
Spring Force Tester
YOUR PARTNER
OF VALVE & CONTROLS
Torque Test
YOUR PARTNER
OF VALVE & CONTROLS
Roughness Test
YOUR PARTNER
OF VALVE & CONTROLS
Life Testing
YOUR PARTNER
OF VALVE & CONTROLS
Leakage Test
Minimum working pressure test
Leakage test100% test Single series number
YOUR PARTNER
OF VALVE & CONTROLS
Grease We Use
Brand:
Instruction:
Petro-Canada’s PURITYTM FG Synthetic Grease is an advanced food gradegrease specially formulated for the toughest food processing applications. Itsadvanced chemistry provides outstanding protection against wear and waterwashout, over a wide range of operating temperatures.
Effective across a wide range of temperature extremes
Normal operating range from -40℃ to 200℃
YOUR PARTNER
OF VALVE & CONTROLS
Our Quality Standard and Certificate
Life test in lab> 1,000,000 times
Spring life cycle > 1,000,000 times
Minimum acting pressure ≤0.2Bar
Catalogue download:
http://respongroup.com/download
/T_series_pneumatic_actuator_c
atalogue.pdf
YOUR PARTNER
OF VALVE & CONTROLS
Production Capacity & New Products
The yearly production capacity 70,000 pcs currently, and in 2015 it will be 100,000 pcs.
Three new products are on process of researching. (Hand Wheel Device\Angle Valve\Scotch Yoke Actuator)
YOUR PARTNER
OF VALVE & CONTROLS
THANKS FOR YOUR TIME!