Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
TRENCOR 135 US Route 42 • PO BOX 814 • West Salem, OH 44287 • Phone +1.419.869.7107 • Fax 419.869.7425 • trencor.com
American Augers / Trencor is not responsible for
customers’ product modifications shown in any photographic images
05/15
Performance SpecificationsPT1060Caterpillar Engine
Power
C9 Tier 3, Stage IIIA
Torque 1148 ft. lbs. (1556 Nm) @ 1400 RPM
Full Power 18.6 U.S. gal/hr (70.4 L/hr)
Fuel Capacity 240 U.S. gal (908 L)
Hydraulic Capacity 167 U.S. gal (632 L)
Cutter / Chain Speed / Chain Force
First Gear 173 ft. (53 m) / minute
Second Gear 367 ft. (112 m) / minute
Third Gear 534 ft. (162 m) / minute
Fourth Gear 813 ft. (248 m) / minute
Reverse Gear 146 ft. (45 m) / minute
Dimensions
(G) Frame Height 11 in. (236 mm)
(H) Frame Width 45 in. (1143 mm)
(I) Deck Height 48.3 in. (1227 mm)
(J) Cab Height 133.4 in. (3388 mm) lowered
(K) Cab Extended 36 in. (914 mm)
(L) Front Overhang Height 25.9 in. (658 mm)
110 in. (2794 mm)
24 in. (610 mm)
158.7 in. (4031 mm)
67 in. (1702 mm)
*Note: All performance specifications, components, weights,
dimensions and other related information are subject to
change without notice from the manufacturer.
421 in. (10,693 mm)
16-35 in. (406-889 mm)
42 in. (1067 mm)
83 in. (2108 mm)
350 HP (261 kW) @ 2200 RPM
Hrs/Full Tank - Full Power 12.9
(A) Length 310.4 in. (7884 mm) no attachments
(B) Width
(C) Overall Width
(D) Overall Height
(E) Track Width
98.7 in. (2507 mm) no attachments
98.7 in. (2507 mm)
133.4 in. (3388 mm)
24 in. (610 mm)
63,405 lb. (282 kN)
29,882 lb. (133 kN)
20,550 lb. (91 kN)
13,503 lb. (60 kN)
74,963 lb. (333 kN)
(F) Track Length 134 in. (3404 mm)
Weights
Machine Weight (Tractor only) 70,000 lbs. (31,750 kg)
Machine with Attachments 85,000 to 110,000 lbs. (38,555 to 49,900 kg)
(M) Front Overhang Distance
(N) Conveyor Belt Width
(O) Conveyor Length
(P) Discharge Height
(Q) Discharge Distance
(R) Machine Length, Short Boom
(S) Digging Depth, Short Boom
(T) Cutting Width Range
(U) Tailwheel Diameter
D-5; 6.91 in. (175 mm)
98.5 in. (2502 mm)
D-6; 8 in. (203.2 mm)
Track Chain Pitch
Digging Chain Pitch
Shipping Width
58 in. (1473 mm)
Trencor®, A Charles Machine Works Company
T1060 TrencherAlternative to blasting; no blasting permits required
Minimal distrubance to environment and neighborhoods
Great in tight spaces
Clean trench & trench bottom
Re-usable backfill
Efficient product installation
Professional image
In most cases, lowest cost / ft.
Less equipment required onsite; reduces
The Trenching Advantage
• Liability / risk
• Fuel consumption
• Number of crew members
• Mobilization costs
• Additional equipment maintenance
Mechanical
Drive
The Original
Mechanical
Drive
The Originalllllllllll
AR
D, J
L
M F S
N
UI
K
E
HT
B, C
Q
P
O
G
Crumb Shoe
Stabilizers
All Trencor Trenchers Feature ...
• NEW! Customer-focused updated designs
• The most powerful trenchers in the world since 1945
• Trencor’s exclusive all-mechanical chain drive
• Industry-leading warranty! 2 Years / 2,000 Hours
• Unbeatable uptime performance
• High performance systems = low cost/hour
• Widths and depths for all applications
• Stand out basics include: a ROPS certified cab (fully enclosed,
climate controlled, pressurized and can raise for better
visibility), LED work lights, air compressor and removeable
hand rails
• Maintenance features: easy access to all fluid check points,
detailed labeling and maintenance charts, oil filled
tailwheels
• Safety features: ground access E-stops, large steps,
hand rails, delay engine start, safety glass, non-slip surfaces
T1060Mechanical Drive Chain Trencher
• The ideal size for a wide range of applications!
Low Speed for hard rock trenching
High Speed for soft rock and soils
Multiple Intermediate Speeds for everything else in between!
• Flexible Configurations!
Widths 16 in. (41 cm) to 36 in. (91.5 cm)
Depths up to 14 ft. (4.3 m)
The T1060 ...
• Compact! Manueverable! Incredible strength in a small footprint!
Berm Scrapers
Manual
Grease System
Popular Options