Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
TABLE OF CONTENTSABOUT ADSC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
MAGAZINE Target Market & Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Advertising Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Advertising Artwork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
E-MAGAZINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
DIRECTORY Target Market . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Advertising Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Advertising Artwork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Products & Services Listings Categories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-16
WEBSITE BANNER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
TERMS & CONDITIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
OPPORTUNITY TO SUBMIT MAGAZINE EDITORIAL CONTENT . . . . . . . . . . . . . . . 19
HOW TO ORDER & KEY CONTACTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
3
ABOUT
ADSC
4
MISSIONTo promote, protect, foster, and advance the drilled shaft, anchored earth retention and micropile industries . ADSC encourages the use of the technologies designed, constructed, supplied, and manufactured by its members to foster safe, quality and ethical practices .
VISIONThe Vision of ADSC is to continue as the recognized world leader in the research, development, education, design, and construction of drilled shafts, anchored earth retention, and micropiles; with safety and quality being held as their highest value .
MEMBERSHIPThe percentages shown below are based on separate organization and individual members, removing additional offices and persons .
MEMBERSHIPs Contractorss Associatess Technical Affiliates
ADSC is a construction trade association dedicated to the deep foundations industry. Our focus is on drilled shaft, anchored earth retention, and micropile technologies. We are represented by specialty subcontractors, civil and geotechnical engineers, and equipment manufacturers and suppliers from around the world.
FOUNDATION DRILLING
MAGAZINEFoundation Drilling magazine is the official publication of ADSC – The International Association of Foundation Drilling (“ADSC”) and is published for Anchored Earth Retention, Drilled Shaft, and Micropile constructors . The audience includes owners, project managers, superintendents, foremen, civil and structural engineers, soil engineers, public engineering officials, architects, manufacturers and distributors of industry related equipment. The magazine contains job history and technical features as well as industry related articles, safety information, personnel and management solutions, a calendar of ADSC and industry events, and other related topics . Foundation Drilling magazine is also published online in an eMag format .
TARGET MARKET Target Market includes specialty subcontractors,
general contractors, design engineers, government agencies, academia, and general subscribers .
VALUE Published eight times a year with over 50,000 domestic
and international readers . In addition, the publication’s eMag delivery provides a reader base that is immeasurable, making it a truly worldwide publication .
Hard copies are mailed to ADSC members, individual subscribers, ENR’s Top 500 General Contractors, academia, Department of Transportation state agencies, and Federal Government regional offices including the FHWA and U.S. Army Corp of Engineers .
Provides FREE opportunities to promote company products and services in high impact departments including Industry Innovations, ADSC in Action, New Product News, Industry News and Not the Hole Story .
All editorial copy is subject to the approval of publisher and must be representative of ADSC’s approved technologies; Anchored earth retention; drilled shafts; and micropiles.
5
FOUNDATION DRILLING | may/June 201910 President’s message
Continued on page 12
THE UNSUNG HEROES OF THE ADSC-IAFDBy Dan Thome, P.E., ADSC President, Vice President – Central Region, Nicholson Construction Company
President’s message
Have you ever worked with someone who is always putting forth extra effort for the betterment of the company – but rarely seeks credit for it? I’m talking about the folks who are not driven by reward or recognition – they do what they do because it’s just who they are. These people are the unsung heroes of any company.
Think of the camera crew on a television broadcast or movie set – while the stars get the spotlight, no show or movie could be produced without these professionals behind the scenes. And what quarterback or running back could score the game-winning touchdown without a strong offensive line to clear the way?
At ADSC-IAFD, we are also powered by unsung heroes, namely our Associate Members. They provide sponsorships for meetings and events – and let’s not forget the ADSC-IAFD has eleven chapters in both the United States and Canada! They are also THE KEY contributors for the International Foundations Congress and Equipment Expo (IFCEE) event.
FOUNDATION DRILLING | may/June 201910 President’s message
Continued on page 12
THE UNSUNG HEROES OF THE ADSC-IAFDBy Dan Thome, P.E., ADSC President, Vice President – Central Region, Nicholson Construction Company
President’s message
Have you ever worked with someone who is always putting forth extra effort for the betterment of the company – but rarely seeks credit for it? I’m talking about the folks who are not driven by reward or recognition – they do what they do because it’s just who they are. These people are the unsung heroes of any company.
Think of the camera crew on a television broadcast or movie set – while the stars get the spotlight, no show or movie could be produced without these professionals behind the scenes. And what quarterback or running back could score the game-winning touchdown without a strong offensive line to clear the way?
At ADSC-IAFD, we are also powered by unsung heroes, namely our Associate Members. They provide sponsorships for meetings and events – and let’s not forget the ADSC-IAFD has eleven chapters in both the United States and Canada! They are also THE KEY contributors for the International Foundations Congress and Equipment Expo (IFCEE) event.
PLEASE NOTE
Deadline for insertion orders at the Early Bird Rate is November 30, 2019.
Standard Rates apply to insertion orders submitted after November 30, 2019.
Preferred positions are subject to publisher’s right of refusal and require advertiser to submit an eight-time insertion order for the ad.
All preferred positions are Full Page ads except for under “President’s Message”; and are exclusive for the calendar year.
Two (2) ad minimum on magazine orders.
All magazine ads are color; no black and white available.
Early bird rates(available thru November 30, 2019)
full page two-thirds page half page One-third page
2X RATE $1,450
5X RATE $1,300
8X RATE $1,150
2X RATE$1,300
5X RATE$1,150
8X RATE$1,000
2X RATE$1,200
5X RATE$1,050
8X RATE$900
2X RATE$1,100
5X RATE$950
8X RATE$800
double page spread preferred position | 8x rate
INSIDE COVERFRONT OR BACK
FULL PAGE$1,575
OUTSIDE BACK COVERFULL PAGE$2,050
PREFERRED PAGESFULL PAGE$1,350
PREFERRED PAGESHALF PAGE$1,200
MAGAZINEADVERTISING RATES
Under “President’sMessage” Opposite Masthead
Opposite “From the Desk of the CEO” Opposite “President’s Message” Opposite ADSC Calendar
six-page foldout
FLAT RATE $3,850
2X RATE $2,950
5X RATE $2,650
8X RATE $2,350
6
full page two-thirds page half page one-third page
2X RATE $1,740
5X RATE $1,560
8X RATE $1,380
2X RATE$1,440
5X RATE$1,260
8X RATE$1,080
2X RATE$1,560
5X RATE$1,380
8X RATE$1,200
2X RATE$1,320
5X RATE$1,140
8X RATE$960
double page spread preferred position | 8x rate
INSIDE COVERFRONT OR BACK
FULL PAGE$1,890
OUTSIDEBACK COVERFULL PAGE$2,460
PREFERRED PAGESFULL PAGE$1,590
PREFERRED PAGESHALF PAGE$1,410
MAGAZINEADVERTISING RATES
Under “President’sMessage” Opposite Masthead
Opposite “From the Desk of the CEO” Opposite “President’s Message” Opposite ADSC Calendar
six-page foldout
FLAT RATE $4,620
2X RATE $3,540
5X RATE $3,180
8X RATE $2,820
7
standard rates(apply after November 30, 2019)
PLEASE NOTE
Deadline for insertion orders at the Early Bird Rate is November 30, 2019.
Standard Rates apply to insertion orders submitted after November 30, 2019.
Preferred positions are subject to publisher’s right of refusal and require advertiser to submit an eight-time insertion order for the ad.
All preferred positions are Full Page ads except for under “President’s Message”; and are exclusive for the calendar year.
Two (2) ad minimum on magazine orders.
All magazine ads are color; no black and white available.
2- PAGE SPREAD WITH BLEED*
17” x 11”
FULL PAGE WITH BLEED*
*Please add .125" bleed on all sides
for a 8 .75" x 11 .25” size before trim .
*Please add .125" bleed on all sides for a 17 .25” x 11 .25” size before trim .
FULL PAGE NO BLEED
1/2 PAGE HORIZONTAL
2/3 PAGE VERTICAL
8 .5" x 11”
7 .75” x 10 .25” 7 .5” x 5”5” x 10 .25"
1/3 PAGE VERT.
1/3 PAGE SQUARE
2 .75" x 10 .25" 5”W x 5”H
Live Area
Bleed Sizes
PLEASE NOTE
Text and art should not exceed the live area or will risk being cut off.
Trim
Live Area*
Gutter
FOUNDATION DRILLING | may/June 20196
The More You Know…BY MICHAEL D. MOORE
Continued on page 8
From TheDesk of the CEO
from the desk of the ceo
• Mixes quickly & easily• Maintains hole stability
• Environmentally friendly
SUPER SLURRY!
SUPER MUD DRY
printer SuperMudDry_FD_ad_Dec2018.indd 1 10/5/18 11:43 AM
More than any other organization, an added value of ADSC membership is the ability to be involved in chapter activities. Currently, there are eleven regional chapters spread throughout North America. The connectivity to ADSC HQ, yet separate and distinct membership, provides opportunity to work in community with other mem-bers of a region to acknowledge and address shared interests and concerns. Throughout the years, ADSC’s overall effectiveness has been enhanced as a result of this structure and it continues today, evidenced by our recent Drill Rig Operator Certification program, of which ironically initiated within the West-ern Canadian Chapter under the direction of former chapter President, Kevin Sharp. (read more about Kevin on page 105 of Industry News).
Late last year, ADSC chapters collectively provided approximately 120 can-didates to take part in a beta case written examination for the Certification of Foundation Drill Rig Operators through our certification partner, The National Commission for the Certification of Crane Operators (NCCCO). There are two clear-cut elements for this certification process. A can-didate must take, and pass, a written exam, and then take and pass a practical exam - one for foundation drill rigs and one for anchor/micropile drill rigs. The written exam includes a core assessment of the candidate’s general knowledge of both types of drill rigs, and a specialty assessment specific to one or both types. The practi-cal examinations are comprised of operational tasks that increase progressively in the skill levels tested. It was determined by NCCCO that all candidates who successfully pass the core and at least one (or both) of the specialty written exams, would be entitled to take the practical exam for one or both types of foundation drill rigs, within a twelve-month period. This would complete the process for certification.
Although certification of drill rig operators is yet to be mandatory, many believe that day is soon to come. Because of this, there is a need to establish a game plan to enable us (the industry) to be best prepared for when it is. Considering this is a new certification program, and due to the current limited number of Practical Examiners, ADSC is asking NC-CCO to consider an extension for those who successfully completed the written beta test to take and pass their practical examinations. This again will likely incorporate chapter involvement, which will be imperative to a successful process.
A candidate must take, and pass, a written exam, and then take and pass a practical exam - one for foundation drill rigs and one for anchor/micropile drill rigs.
MAGAZINEADVERTISING ARTWORK
8
artwork specifications
Magazine Trim Size: 8 .5” x 11”Full Page With Bleed: 8 .75" x 11 .25"Full Page Live Area: 7 .75” x 10 .25” Full 2-Page Spread With Bleed: 17 .25" x 11 .25"Double Page Live Area: 16 .25” x 10 .25”3-Panel (6 Page) Foldout Trim Size: 23” x 11”
MAGAZINEADVERTISING ARTWORK
9
ARTWORK REQUIREMENTSFinal art should have adequate bleed . All color artwork must be in CMYK mode, if files supplied are in RGB color mode they will be converted to CMYK, which my result in a color shift .
Accepted Software: Adobe Photoshop TIFF, PDF (must be accurately created) & Illustrator EPS high resolution files.
For Quality Output: Photoshop files must be 300 dpi. Line art should be 1200 dpi. CMYK color.
Copy Placement: (Live Area) 1/2” from gutter and a minimum of 1/4” from page trim .
Bleed: Should be a minimum 1/8” to 1/4” on all sides .
SENDING ARTWORKSend art via ADSC’s Hightail site . Copy and paste the following link into your browser, a prompt will direct you to the loading instructions . https://dropbox.hightail.com/knephew
artwork due dates
january february/march
april may/june july august/september
october november/december
DECEMBER 5 JANUARY 5 MARCH 5 APRIL 5 JUNE 5 JULY 5 SEPTEMBER 5 OCTOBER 5
Goettle’s Riverside Drive: Holding Back the Hills Along the Ohio River
Drillingapril 2019
Aldridge Installs Everglade Foundations
ADSC Summer Meeting PreviewHilton Head, South Carolina
Honoring Bill Maher Keller Family Remember
Historic Miami LibraryBegins a New Chapter
FOUNDATIONVEIT Installs Drilled Shafts on Red Wing Bridge
DrillingJanuary 2019
Time to bring our A-GaME
HBI uses
team approach AND FIVE-STAR SOLUTION
ADSC Board of Directors2019 Nominees
Certification for Drill Rig Operators Introduced
FOUNDATIONBrayman’s Bagnell Dam Post Tensioning
DrillingMay/June 2019
JudgeDoyle SquareTerra sets a
New precedent
Aecon FoundationsDrilling towards
a better tomorrow
Integrity in MarketingFraley Construction Marketing
Wagman’s Bridging Construction’s Gender GapIn the Deep Foundation Industry
FOUNDATION
The eMag allows advertisers to provide a direct link to their website, increasing traffic and providing a greater exposure to an expansive audience . The eMag version is distributed via email, social media and is available on on the ADSC website . This digital version allows readers to bookmark pages and provides keyword search, navigation shortcuts, and can be printed or downloaded .
E-MAGAZINE SPONSORThis option gives your company branded recognition throughout Foundation Drilling e-magazine with the company’s logo placed on the footer of all house articles and feature articles without conflict of interest. Advertiser may also supply a link to a YouTube video for placement . Advertiser is responsible for providing artwork . This option is exclusive and sold per issue (meaning only one company can select this option each issue) . Includes:
One (1) Bookmark Ad – (jpg or png) 300 x 1200 pixels
One (1) Video – please provide link to published YouTube video from the Embed tab (optional)
One (1) Logo for footer RATE: $1,500.00 per magazine issue
E-MAGAZINE POP-UP ADSThis option gives your company the opportunity to brand three (3) pop-up content focused advertisements within the e-magazine . Pop-up ads will be placed in various and rotating positions each issue, and will vary in size . Advertiser is responsible for providing artwork for the pop-up ads . This option is exclusive and sold per issue (meaning only one company can select this option each issue) . Includes:
Two (2) Small Ad Pop-Up (jpg or png, file size under 1MB) 300 x 250 pixels
One (1) Bottom Banner Pop-Up (jpg or png, file size under 1MB) 728 x 90 pixels
rate: $1,500.00 per magazine issue
Moretrench’s Philly Load Test Delivers Knockout Punch
DrillingMAY/JUNE 2018
ECA100 Years in Business
Center Rockand Nairobi's Pinnacle Towers
Ralph Peck and the History of the Geoprofession
LRFD for Micropiles
Images fromIFCEE
FOUNDATION
E-MAGAZINEADVERTISING
10
The 2020 ADSC Membership Directory offers ample opportunity for advertising your business. We offer 4-color ad space in several sizes to suit any budget. Companies listed in the directory are organized by member categories, and there is an alphabetic index, geographic index and key personnel index. We also offer three Product and Services listing categories: Construction Services, Suppliers/Manufacturers, and Consulting Services . Advertising through the Products and Services listing is a cost-effective way to showcase your company .
TARGET MARKET Hard copies are mailed to decision makers in industries
represented by the ADSC and beyond, including ADSC membership, ENR’s Top 400 General Contractors, Academia, State Department of Transportation agencies, and Federal Government regional offices including the U.S. Army Corp of Engineers.
A searchable and downloadable eDirectory is available at www .adsc-iafd .com .
MEMBERSHIPDIRECTORY
11
Cons
truct
ion
Serv
ices
Supp
liers
/Man
ufac
ture
rs
Cons
ultin
g Se
rvic
es
PRODUCT AND SERVICES LISTINGSPRODUCTS & SERVICES – consulting services
ADSC - The International Association of Foundation Drilling | 341
Construction Consulting Peirce Engineering, Inc.
Construction Inspection CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Dam Design/Rehabilitation CTL | Thompson, Inc.
Deep Foundations Consultants CTL | Thompson, Inc. GRL Engineers, Inc.
Design Drilled Shafts CTL | Thompson, Inc.
Design-Earth/Rock Retention Systems CTL | Thompson, Inc. Peirce Engineering, Inc.
Design Reinforced Soil Structures CTL | Thompson, Inc.
Environmental Consultants CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Foundation Consultants-General CTL | Thompson, Inc.
Foundation Engineering CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C. GRL Engineers, Inc.
Geotechnical Inspection CTL | Thompson, Inc.
Geotechnical Engineering Consultants CTL | Thompson, Inc. Peirce Engineering, Inc. Tectonic Engineering & Surveying Consultants P.C.
Geotechnical Integrity Testing GRL Engineers, Inc.
Load Testing - Dynamic, Static GRL Engineers, Inc. Loadtest Peirce Engineering, Inc.
Material Testing CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Non-Destructive Testing and Evaluation GRL Engineers, Inc.
Soils Investigation and Testing CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Structural Engineering Consulting CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Testing Laboratory CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
PRODUCTS & SERVICES – suppliers/manufacturers
ADSC - The International Association of Foundation Drilling | 331
Anchors – Earth and Rock AGL Manufacturing Ltd. Casagrande USA, Inc. Con-Tech Systems Earth Contact Products PJ’s Rebar, Inc. Skyline Steel Williams Form Engineering Corporation
Anchors – Helical Earth Contact Products
Casing/Drill Steel/Tooling Armador Piling Tools BAUER-Pileco Inc. Champion Equipment Sales, LLC DRILLTOOLS Hammer & Steel, Inc. Hennessy International, Inc.
Liebherr-Werk Nenzing GmbH ROC Equipment LLC Rodrill, Inc. Star Iron Works, Inc. Steel Pipe Fabricators, Inc.
Casing – Pipe Piling Steel Pipe Fabricators, Inc.
Continuous Flight Auger Equipment American Piledriving Equipment BAUER-Pileco Inc. Champion Equipment Company Champion Equipment Sales, LLC Comacchio SRL CZM Foundation Equipment DRILLTOOLS Hammer & Steel, Inc. ICE® International Construction Equipment, Inc.
Kelly Tractor Co. Liebherr-Werk Nenzing GmbH Soilmec North America
Cranes – Rentals/Sales BAUER-Pileco Inc. Champion Equipment Sales, LLC Kelly Tractor Co. Liebherr-Werk Nenzing GmbH Scott Powerline and Utility Equipment
Crawler Undercarriage TracMec Srl
CSM BAUER-Pileco Inc. Liebherr-Werk Nenzing GmbH
Down-Hole Hammers & Accessories AGL Manufacturing Ltd. Bit Brokers International Hennessy International, Inc. NUMA Star Iron Works, Inc.
Drilled Shaft Rigs/Diggers (New) Dealers/ Distributors BAUER-Pileco Inc. Casagrande USA, Inc. Champion Equipment Sales, LLC CZM Foundation Equipment foundationdrilling.com Hammer & Steel, Inc. Hennessy International, Inc. ICE® International Construction Equipment, Inc. Kelly Tractor Co. MAIT Spa MAIT USA Corporation MAIT USA (West Coast) MAIT USA (Canada) Rodrill, Inc. Soilmec North America
Drilled Shaft Rigs/Diggers (New) Manufacturers BAUER-Pileco Inc. Comacchio SRL CZM Foundation Equipment Foremost Industries LEFFER Rodrill, Inc. Spiradrill Watson Drill Rigs
PRODUCTS & SERVICES – construction services
318 | ADSC - The International Association of Foundation Drilling
Drilled Shaft Foundations Aldridge Construction, Inc. Aldridge Electric, Inc. Anderson Drilling, Inc. Atlantic Caisson Corporation Avon Corporation Berkel & Company Contractors, Inc. Case Foundation Company CJ Drilling, Inc. Condon-Johnson & Assoicates Inc. DBM Contractors, Inc. Dees-Hennessey, Inc. GOETTLE Ground Hog Foundation Drilling Co. Hayes Drilling, Inc. Hayward Baker Inc. HCM Contractors, Inc. Long Foundation Drilling Co. Malcolm Drilling Company, Inc. McKinney Drilling Company Moretrench Russo Corporation Scherzinger Drilling, Inc. Seaboard Foundations, Inc. Specialty Drilling Ltd. Underpinning & Foundation Skanska
Belled Drilled Shafts Aldridge Construction, Inc. Aldridge Electric, Inc. Anderson Drilling, Inc. Atlantic Caisson Corporation Case Foundation Company CJ Drilling, Inc. GOETTLE Ground Hog Foundation Drilling Co. Hayward Baker Inc. Illini Drilled Foundations, Inc. Malcolm Drilling Company, Inc. Russo Corporation Specialty Drilling Ltd.
Caisson Drilling from Barges Aldridge Construction, Inc. Aldridge Electric, Inc. Anderson Drilling, Inc. Case Foundation Company CJ Drilling, Inc. DBM Contractors, Inc. GOETTLE Hayward Baker Inc. Malcolm Drilling Company, Inc. Moretrench Russo Corporation Underpinning & Foundation Skanska
Cellular/Communication Foundations Aldridge Construction, Inc. Aldridge Electric, Inc. Atlantic Caisson Corporation Berkel & Company Contractors, Inc. CJ Drilling, Inc. Hayes Drilling, Inc. Scherzinger Drilling, Inc. Specialty Drilling Ltd.
Commercial/Industrial Aldridge Construction, Inc. Anderson Drilling, Inc. Avon Corporation Berkel & Company Contractors, Inc. Ground Hog Foundation Drilling Co. Scherzinger Drilling, Inc. Specialty Drilling Ltd.
Design-Build Drilled Shafts Aldridge Construction, Inc. Aldridge Electric, Inc. Anderson Drilling, Inc. Atlantic Caisson Corporation Berkel & Company Contractors, Inc. Case Foundation Company DBM Contractors, Inc. GOETTLE Hayward Baker Inc. Malcolm Drilling Company, Inc. McKinney Drilling Company Moretrench Russo Corporation Underpinning & Foundation Skanska
PRODUCTS & SERVICES – consulting services
ADSC - The International Association of Foundation Drilling | 341
Construction Consulting Peirce Engineering, Inc.
Construction Inspection CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Dam Design/Rehabilitation CTL | Thompson, Inc.
Deep Foundations Consultants CTL | Thompson, Inc. GRL Engineers, Inc.
Design Drilled Shafts CTL | Thompson, Inc.
Design-Earth/Rock Retention Systems CTL | Thompson, Inc. Peirce Engineering, Inc.
Design Reinforced Soil Structures CTL | Thompson, Inc.
Environmental Consultants CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Foundation Consultants-General CTL | Thompson, Inc.
Foundation Engineering CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C. GRL Engineers, Inc.
Geotechnical Inspection CTL | Thompson, Inc.
Geotechnical Engineering Consultants CTL | Thompson, Inc. Peirce Engineering, Inc. Tectonic Engineering & Surveying Consultants P.C.
Geotechnical Integrity Testing GRL Engineers, Inc.
Load Testing - Dynamic, Static GRL Engineers, Inc. Loadtest Peirce Engineering, Inc.
Material Testing CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Non-Destructive Testing and Evaluation GRL Engineers, Inc.
Soils Investigation and Testing CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Structural Engineering Consulting CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Testing Laboratory CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
PRODUCTS & SERVICES – suppliers/manufacturers
ADSC - The International Association of Foundation Drilling | 331
Anchors – Earth and Rock AGL Manufacturing Ltd. Casagrande USA, Inc. Con-Tech Systems Earth Contact Products PJ’s Rebar, Inc. Skyline Steel Williams Form Engineering Corporation
Anchors – Helical Earth Contact Products
Casing/Drill Steel/Tooling Armador Piling Tools BAUER-Pileco Inc. Champion Equipment Sales, LLC DRILLTOOLS Hammer & Steel, Inc. Hennessy International, Inc.
Liebherr-Werk Nenzing GmbH ROC Equipment LLC Rodrill, Inc. Star Iron Works, Inc. Steel Pipe Fabricators, Inc.
Casing – Pipe Piling Steel Pipe Fabricators, Inc.
Continuous Flight Auger Equipment American Piledriving Equipment BAUER-Pileco Inc. Champion Equipment Company Champion Equipment Sales, LLC Comacchio SRL CZM Foundation Equipment DRILLTOOLS Hammer & Steel, Inc. ICE® International Construction Equipment, Inc.
Kelly Tractor Co. Liebherr-Werk Nenzing GmbH Soilmec North America
Cranes – Rentals/Sales BAUER-Pileco Inc. Champion Equipment Sales, LLC Kelly Tractor Co. Liebherr-Werk Nenzing GmbH Scott Powerline and Utility Equipment
Crawler Undercarriage TracMec Srl
CSM BAUER-Pileco Inc. Liebherr-Werk Nenzing GmbH
Down-Hole Hammers & Accessories AGL Manufacturing Ltd. Bit Brokers International Hennessy International, Inc. NUMA Star Iron Works, Inc.
Drilled Shaft Rigs/Diggers (New) Dealers/ Distributors BAUER-Pileco Inc. Casagrande USA, Inc. Champion Equipment Sales, LLC CZM Foundation Equipment foundationdrilling.com Hammer & Steel, Inc. Hennessy International, Inc. ICE® International Construction Equipment, Inc. Kelly Tractor Co. MAIT Spa MAIT USA Corporation MAIT USA (West Coast) MAIT USA (Canada) Rodrill, Inc. Soilmec North America
Drilled Shaft Rigs/Diggers (New) Manufacturers BAUER-Pileco Inc. Comacchio SRL CZM Foundation Equipment Foremost Industries LEFFER Rodrill, Inc. Spiradrill Watson Drill Rigs
PRODUCTS & SERVICES – construction services
318 | ADSC - The International Association of Foundation Drilling
Drilled Shaft Foundations Aldridge Construction, Inc. Aldridge Electric, Inc. Anderson Drilling, Inc. Atlantic Caisson Corporation Avon Corporation Berkel & Company Contractors, Inc. Case Foundation Company CJ Drilling, Inc. Condon-Johnson & Assoicates Inc. DBM Contractors, Inc. Dees-Hennessey, Inc. GOETTLE Ground Hog Foundation Drilling Co. Hayes Drilling, Inc. Hayward Baker Inc. HCM Contractors, Inc. Long Foundation Drilling Co. Malcolm Drilling Company, Inc. McKinney Drilling Company Moretrench Russo Corporation Scherzinger Drilling, Inc. Seaboard Foundations, Inc. Specialty Drilling Ltd. Underpinning & Foundation Skanska
Belled Drilled Shafts Aldridge Construction, Inc. Aldridge Electric, Inc. Anderson Drilling, Inc. Atlantic Caisson Corporation Case Foundation Company CJ Drilling, Inc. GOETTLE Ground Hog Foundation Drilling Co. Hayward Baker Inc. Illini Drilled Foundations, Inc. Malcolm Drilling Company, Inc. Russo Corporation Specialty Drilling Ltd.
Caisson Drilling from Barges Aldridge Construction, Inc. Aldridge Electric, Inc. Anderson Drilling, Inc. Case Foundation Company CJ Drilling, Inc. DBM Contractors, Inc. GOETTLE Hayward Baker Inc. Malcolm Drilling Company, Inc. Moretrench Russo Corporation Underpinning & Foundation Skanska
Cellular/Communication Foundations Aldridge Construction, Inc. Aldridge Electric, Inc. Atlantic Caisson Corporation Berkel & Company Contractors, Inc. CJ Drilling, Inc. Hayes Drilling, Inc. Scherzinger Drilling, Inc. Specialty Drilling Ltd.
Commercial/Industrial Aldridge Construction, Inc. Anderson Drilling, Inc. Avon Corporation Berkel & Company Contractors, Inc. Ground Hog Foundation Drilling Co. Scherzinger Drilling, Inc. Specialty Drilling Ltd.
Design-Build Drilled Shafts Aldridge Construction, Inc. Aldridge Electric, Inc. Anderson Drilling, Inc. Atlantic Caisson Corporation Berkel & Company Contractors, Inc. Case Foundation Company DBM Contractors, Inc. GOETTLE Hayward Baker Inc. Malcolm Drilling Company, Inc. McKinney Drilling Company Moretrench Russo Corporation Underpinning & Foundation Skanska
PRODUCTS & SERVICES – consulting services
ADSC - The International Association of Foundation Drilling | 341
Construction Consulting Peirce Engineering, Inc.
Construction Inspection CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Dam Design/Rehabilitation CTL | Thompson, Inc.
Deep Foundations Consultants CTL | Thompson, Inc. GRL Engineers, Inc.
Design Drilled Shafts CTL | Thompson, Inc.
Design-Earth/Rock Retention Systems CTL | Thompson, Inc. Peirce Engineering, Inc.
Design Reinforced Soil Structures CTL | Thompson, Inc.
Environmental Consultants CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Foundation Consultants-General CTL | Thompson, Inc.
Foundation Engineering CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C. GRL Engineers, Inc.
Geotechnical Inspection CTL | Thompson, Inc.
Geotechnical Engineering Consultants CTL | Thompson, Inc. Peirce Engineering, Inc. Tectonic Engineering & Surveying Consultants P.C.
Geotechnical Integrity Testing GRL Engineers, Inc.
Load Testing - Dynamic, Static GRL Engineers, Inc. Loadtest Peirce Engineering, Inc.
Material Testing CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Non-Destructive Testing and Evaluation GRL Engineers, Inc.
Soils Investigation and Testing CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Structural Engineering Consulting CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
Testing Laboratory CTL | Thompson, Inc. Tectonic Engineering & Surveying Consultants P.C.
PRODUCTS & SERVICES – suppliers/manufacturers
ADSC - The International Association of Foundation Drilling | 331
Anchors – Earth and Rock AGL Manufacturing Ltd. Casagrande USA, Inc. Con-Tech Systems Earth Contact Products PJ’s Rebar, Inc. Skyline Steel Williams Form Engineering Corporation
Anchors – Helical Earth Contact Products
Casing/Drill Steel/Tooling Armador Piling Tools BAUER-Pileco Inc. Champion Equipment Sales, LLC DRILLTOOLS Hammer & Steel, Inc. Hennessy International, Inc.
Liebherr-Werk Nenzing GmbH ROC Equipment LLC Rodrill, Inc. Star Iron Works, Inc. Steel Pipe Fabricators, Inc.
Casing – Pipe Piling Steel Pipe Fabricators, Inc.
Continuous Flight Auger Equipment American Piledriving Equipment BAUER-Pileco Inc. Champion Equipment Company Champion Equipment Sales, LLC Comacchio SRL CZM Foundation Equipment DRILLTOOLS Hammer & Steel, Inc. ICE® International Construction Equipment, Inc.
Kelly Tractor Co. Liebherr-Werk Nenzing GmbH Soilmec North America
Cranes – Rentals/Sales BAUER-Pileco Inc. Champion Equipment Sales, LLC Kelly Tractor Co. Liebherr-Werk Nenzing GmbH Scott Powerline and Utility Equipment
Crawler Undercarriage TracMec Srl
CSM BAUER-Pileco Inc. Liebherr-Werk Nenzing GmbH
Down-Hole Hammers & Accessories AGL Manufacturing Ltd. Bit Brokers International Hennessy International, Inc. NUMA Star Iron Works, Inc.
Drilled Shaft Rigs/Diggers (New) Dealers/ Distributors BAUER-Pileco Inc. Casagrande USA, Inc. Champion Equipment Sales, LLC CZM Foundation Equipment foundationdrilling.com Hammer & Steel, Inc. Hennessy International, Inc. ICE® International Construction Equipment, Inc. Kelly Tractor Co. MAIT Spa MAIT USA Corporation MAIT USA (West Coast) MAIT USA (Canada) Rodrill, Inc. Soilmec North America
Drilled Shaft Rigs/Diggers (New) Manufacturers BAUER-Pileco Inc. Comacchio SRL CZM Foundation Equipment Foremost Industries LEFFER Rodrill, Inc. Spiradrill Watson Drill Rigs
PRODUCTS & SERVICES – construction services
318 | ADSC - The International Association of Foundation Drilling
Drilled Shaft Foundations Aldridge Construction, Inc. Aldridge Electric, Inc. Anderson Drilling, Inc. Atlantic Caisson Corporation Avon Corporation Berkel & Company Contractors, Inc. Case Foundation Company CJ Drilling, Inc. Condon-Johnson & Assoicates Inc. DBM Contractors, Inc. Dees-Hennessey, Inc. GOETTLE Ground Hog Foundation Drilling Co. Hayes Drilling, Inc. Hayward Baker Inc. HCM Contractors, Inc. Long Foundation Drilling Co. Malcolm Drilling Company, Inc. McKinney Drilling Company Moretrench Russo Corporation Scherzinger Drilling, Inc. Seaboard Foundations, Inc. Specialty Drilling Ltd. Underpinning & Foundation Skanska
Belled Drilled Shafts Aldridge Construction, Inc. Aldridge Electric, Inc. Anderson Drilling, Inc. Atlantic Caisson Corporation Case Foundation Company CJ Drilling, Inc. GOETTLE Ground Hog Foundation Drilling Co. Hayward Baker Inc. Illini Drilled Foundations, Inc. Malcolm Drilling Company, Inc. Russo Corporation Specialty Drilling Ltd.
Caisson Drilling from Barges Aldridge Construction, Inc. Aldridge Electric, Inc. Anderson Drilling, Inc. Case Foundation Company CJ Drilling, Inc. DBM Contractors, Inc. GOETTLE Hayward Baker Inc. Malcolm Drilling Company, Inc. Moretrench Russo Corporation Underpinning & Foundation Skanska
Cellular/Communication Foundations Aldridge Construction, Inc. Aldridge Electric, Inc. Atlantic Caisson Corporation Berkel & Company Contractors, Inc. CJ Drilling, Inc. Hayes Drilling, Inc. Scherzinger Drilling, Inc. Specialty Drilling Ltd.
Commercial/Industrial Aldridge Construction, Inc. Anderson Drilling, Inc. Avon Corporation Berkel & Company Contractors, Inc. Ground Hog Foundation Drilling Co. Scherzinger Drilling, Inc. Specialty Drilling Ltd.
Design-Build Drilled Shafts Aldridge Construction, Inc. Aldridge Electric, Inc. Anderson Drilling, Inc. Atlantic Caisson Corporation Berkel & Company Contractors, Inc. Case Foundation Company DBM Contractors, Inc. GOETTLE Hayward Baker Inc. Malcolm Drilling Company, Inc. McKinney Drilling Company Moretrench Russo Corporation Underpinning & Foundation Skanska
VALUE The directory provides company listings alphabetically and
by geographic location and lists key personnel and specific products and services .
The eDirectory allows advertisers to supply a direct link to their website, increasing traffic to that site and providing greater exposure to an expansive audience . This digital version allows readers to bookmark pages and provides keyword search, navigation shortcuts, and can be printed or downloaded .
Spiral binding and the digest size of this directory means it can easily travel to field sites, placing your company’s ad in the hands of the key personnel who need it most .
Through the Products and Services listings, the Membership Directory allows your company the opportunity to be directly associated with the specialized products and services you provide .
MEMBERSHIPDIRECTORY
12
4-color (Random placement)
double page spread full page half page quarter page
RATE $3,550
RATE $2,150
RATE $1,250
RATE $875
black & white (Random placement)
full page half page quarter page
RATE $1,350
RATE $975
RATE $625
preferred position
RATE $2,975
RATE $2,975
RATE $3,125
RATE $2,800
inside front cover inside back cover back cover tab pages
products & services listings
per listing
RATE $40
PLEASE NOTE Preferred positions are subject to subject to publisher’s right of refusal .
DIRECTORYADVERTISING RATES
13
Please see listings categories on pages 14-15 .
DEADLINE FOR INSERTION ORDERS IS SEPTEMBER 30, 2019.
ARTWORK SPECIFICATIONS
ARTWORK REQUIREMENTSFinal art should have adequate bleed . All color artwork must be in CMYK mode, if files supplied are in RGB color mode they will be converted to CMYK, which my result in a color shift .
Accepted Software: Adobe Photoshop TIFF, PDF (must be accurately created) and Illustrator EPS high resolution files.
For Quality Output: Photoshop files must be 300 dpi. Line art should be 1200 dpi. CMYK color.
Copy Placement: (Live Area) 1/2” from gutter and a minimum of 1/4” from page trim .
Bleed: Should be a minimum 1/8” to 1/4” on all sides .
SENDING ARTWORKSend art via ADSC’s Hightail site . Copy and paste the following link into your browser, a prompt will direct you to the loading instructions .
https://dropbox.hightail.com/knephew
ARTWORK DUE DATEOctober 11, 2019
TRIM SIZES: Covers: 6-1/8” x 8-1/2”Tab/Full: 5-3/4” x 8-1/2”
W/BLEED SIZES: Covers: 6-3/8” x 8-3/4”Tab/Full: 6” x 8-3/4”
LIVE AREA: Covers: 5-3/4” x 8-1/8”Tab/Full: 5” x 7-3/4”
DIRECTORY ADVERTISING ARTWORK
14
5” x 7-3/4”
TABS AND FULL PAGE
2-1/4” x 7-1/8”
1/2 PAGE VERT.
5” x 3-1/2”
1/2 PAGE HORIZONTAL
5” x 1-7/8”
1/4 PAGE HORIZONTAL
2-1/4” x 3-1/2”
1/4 PAGE VERTICAL
Trim
Live Area
Live Areas per Ad Size
artwork specifications
CONSTRUCTION SERVICES Anchors – Soil, Rock and Concrete
Architectural Shotcrete Wall Finishes
Belled Drilled Shafts
Blasting
Caisson Drilling from Barges
Cellular/Communication Foundations
Commercial/Industrial
Dam Rehabilitation
Deep Soil Mixing
Design-Build Drilled Shafts
Design-Build for Transmission Lines
Design-Build Geo-Support Systems
Dewatering
Drilled Shaft Foundations
Drilled Shafts – Over 10 ft diameter
Drilling in Contaminated Sites
Electric Transmission Lines Foundations
Elevator Shaft Drilling
Environmental Sensitive Drilling
Ground Freezing
Ground Improvement
Grouting – General
High Mast Lighting and Sign Foundations
Highway/Bridge Foundations
Jet Grouting
Lagging
Large Diameter Access Shafts
Limited Access/Low Clearance
Micropiles
Oscillator/Rotator
Piling for New Elevator Pits Existing Bldg.
Pre-Drilling for Piles
Railroad Foundations
Residential
Rock Drilling
Secant/Tangent Wall Construction
Shoring
Shotcrete
Site Work
Slurry Walls
Soil Mixed Walls
Tieback Walls
Tiebacks
Underpinning
Utilities
PRODUCTS & SERVICESLISTINGS CATEGORIES
CONSULTING SERVICES Construction Consulting
Construction Inspection
Dam Design/Rehabilitation
Deep Foundation Consultants
Design Drilled Shafts
Design Earth Retention Systems
Design Reinforced Soil Structures
Environmental Consultants
Foundation Consultants – General
Foundation Engineering
Geotechnical Engineering Consultants
Geotechnical Inspection
Geotechnical Integrity Testing
Geotechnical/Structural Instrumentation
Load Testing – Dynamic/Static
Marine Design
Material Testing
Non-Destructive Testing and Evaluation
Soils Investigation and Testing
Structural Engineering Consulting
Testing Laboratory
Underground Engineering
15
SUPPLIERS & MANUFACTURERS Anchors – Soil, Rock and Concrete
Casing/Drill Steel/Tooling/Shoes
Compressors and Air Tools
Continuous Flight Auger Equipment
Cranes – Rentals/Sales
Crawler Undercarriage
CSM
Down-Hole Hammers & Accessories
Drill Bits, Custom
Drill Rig Rentals
Drill Steel, Couplings, Drilling Accessories
Drilled Shaft Casing
Drilled Shaft Rigs/Digger – Parts
Drilled Shaft Rigs/Diggers (New) – Dealers/Distributors
Drilled Shaft Rigs/Diggers Mfg . (New)
Drilled Shaft Tools (New)
Drilling Bits and Teeth
Drilling Equipment – Limited Access/Low Clearance
Drilling Rigs/Diggers & Tools (Used)
Earth Retention Drills (New)
Earth Retention Drills/Tools (Used)
Earth Retention Tooling (New)
Epoxy Coated Strand
Geothermal Drill Bits
Geothermal Drilling Equip . (New)
Geothermal Systems
Grouting Mixers/Equipment/Sales & Rentals
Hammer Grab/Spherical Grab
Hard-facing for Repair, Maintenance
Hollow Rebar for CSL
Hydraulic Pumps, Jacks, Gauges
Inspection Equipment
Instrumentation for Foundation Eng . (Sales)
Insurance / Bonding / Risk Management
Integrity Testing Equipment (Sales)
Jet Grouting Equipment / Sales & Rentals
Lead Systems
Load Testing Equipment
Low Profile Canister Drills
Micropile Drilling Tools and Equipment
Micropile Materials, Casing
Oscillating/Rotating Equipment
Pile Driving Equipment (New & Used)
Pipe, Casing and Tube
Polymers
Pumps – All
Reinforcing Cages: Centralizers, Rebar Couplings
Rental Equipment – Tools, Compressors, Down-Hole & Miscellaneous
Replacement Parts – Chassis
Reverse Circulation Drilling Equipment
Self-Hardening Slurry Materials
Shoring
Slurry Drilling Equipment/Testing
Slurry Drilling Materials/Products/Consulting
Sonar Calipering
Sonic Drilling Equipment
Steel Fabrication
Steel Products
Tool Lubricants
Transmissions for Drilling Machinery
Tremie Pipe
Vertical Travel Leads
Vibratory Casing Drivers/Extractors
Winches – All
Wire and Cable
PRODUCTS & SERVICESLISTINGS CATEGORIES
16
Advertising on the ADSC website is an excellent way to reach member and non-member visitors, and to reinforce your marketing message . Visitors view our website to learn about upcoming association events, discover ways to maximize their ADSC membership, view the latest digital issue of Foundation Drilling magazine, search the electronic edition of the Membership Directory and shop the ADSC Technical Library. Advertising on the ADSC website offers cost-effective opportunities to position your company as a leader with influential geo-industry professionals.
VALUE Cross promotion in other ADSC publications and
communication media Year-round visibility reinforces brand recognition Advertise to industry professionals who are
interested in ADSC news, trends and events Allows for dynamic and time sensitive promotion
ON AVERAGE ADSC-IAFD.COM RECEIVES: • 2,300 unique visitors per month • 4,500 total visits per month • 10,000 page visits per month • Three pages per visit
ARTWORK REQUIREMENTSAll Premium Banners appear on the ADSC home page and will be intermixed with ADSC events. Premium Banner advertisements submitted must be 1280 x 600 pixels and in JPEG format .
ARTWORK DUE DATEDecember 15, 2019
ADVERTISERS RATES12 months/$2,000
ANNUAL CYCLEJanuary 1 – December 31
PREMIUM BANNERS
WEBSITE BANNERADVERTISING
17
premium banner
OUR ADVERTISERS BANNERAll advertisers in Foundation Drilling magazine and/or the ADSC Membership Directory
receive a complimentary logo in the “Our Advertisers Banner” section.All logos submitted must be 230x120 pixels and in a jpeg format.
OUR ADVERTISERS BANNERS
DEADLINE FOR INSERTION ORDERS IS DECEMBER 20, 2019.
ADVERTISING TERMS & CONDITIONS
The following terms and conditions apply to ALL advertising insertion orders submitted to and accepted by ADSC: 1. The insertion order is a contract between ADSC – The International Association of Foundation Drilling (“ADSC”) and
Advertiser to reserve advertising space in one or more of the advertising options presented herein this Media Kit . Advertiser includes any company, its employees and advertising agency acting as agent for the company that submits an insertion order to ADSC .
2. An accepted insertion order is effective immediately upon receipt by ADSC; and is non-cancellable after either publication of first ordered ad or thirty (30) days from the date order is submitted to ADSC, whichever occurs first.
3 . All advertising is subject to space availability and the approval of ADSC . ADSC expressly reserves the right to refuse any ad .
4 . Advertisements for products and services must be consistent with the technologies approved by ADSC and meet the specifications set forth in this Media Kit.
5 . Positioning of ads is at the discretion of ADSC except where special preferred position requests are acknowledged and approved by ADSC .
6 . New space reservations by Advertiser that are not included in a previous insertion order must be submitted on a new insertion order .
7 . Insertion orders must be received before or with the new ad by the ad submission deadline for each issue . ADSC has no obligation to include late arrivals or to modify ads after the specified submission deadlines.
8 . It is the Advertiser’s responsibility to submit new ad art for any issue by the appropriate deadline . If Advertiser does not provide new ad art by the appropriate deadline, ADSC will pick-up previous ad artwork for publication and has no obligation to make a change for published issue .
9 . Advertiser assumes liability for all printed ad content (including text, pictures, representations, and illustrations) and holds harmless ADSC and its agents and employees from any claims arising therefrom made against the publisher .
10. ADSC is not bound by any special condition, specification, or requirement of Advertiser on an insertion order. 11. The insertion order is a commitment to advertise in the specified ADSC publication. Cancellations are subject
to full payment for the ad space reserved by Advertiser. Advertiser has full financial responsibility for the total cost of order at the rates quoted herein .
12. Advertising rates herein are quoted at net prices in USD and do not include any commission for advertising agency . Invoices are due and payable upon receipt . A $10 .00 per day late payment fee will be assessed on each invoice not paid in full within sixty (60) days of invoice date .
13 . Advertising may be suspended or cancelled at any time by ADSC with at least three (3) business days prior notice for either nonpayment of invoice more than sixty (60) days past due; or a non-renewal of ADSC membership within ninety (90) days of membership expiration date . Any remaining balance of total cost of insertion order after suspension or cancellation shall become due and payable immediately to ADSC .
14 . If ad invoices are to be sent directly to advertising agency for payment, both the advertised company and its advertising agency are obligated for payments due under these terms and conditions irrespective of any separate agreements that may exist between advertised company and its advertising agency .
18
ADSC is always looking for fascinating and informative content from our members for the Foundation Drilling Magazine . Here are some ways your company can be included:
Cover Features
Interior Features
Industry News
Not the Hole Story Features
New Products News
Industry Innovations
If you are interested in submitting content, please contact Angie at aelmendorf@adsc-iafd .com .
OPPORTUNITY TO SUBMITMAGAZINE EDITORIAL CONTENT
19
Brayman’s Bagnell Dam Post Tensioning
DrillingMay/June 2019
JudgeDoyle SquareTerra sets a
New precedent
Aecon FoundationsDrilling towards
a better tomorrow
Integrity in MarketingFraley Construction Marketing
Wagman’s Bridging Construction’s Gender GapIn the Deep Foundation Industry
FOUNDATION
20
HOW TO ORDER
20
ADVERTISING AVAILABILITYAdvertising is only available to ADSC member organizations .
To join ADSC, please visit www .adsc-iafd .com, under “Membership”, and submit your application. If you have any membership questions or need assistance with applying, please contact Angie Elmendorf, Member Relations, at:
aelmendorf@adsc-iafd .com
INSERTION ORDERSPlace your advertising insertion orders online: 1 . Visit www .adsc-iafd .com 2 . Click on the advertising tab on the Homepage
KEY CONTACTSADVERTISING & MEDIAAngie Elmendorfaelmendorf@adsc-iafd .com
ARTWORKKatie Nephewknephew@adsc-iafd .com
BILLINGFred Millerfmiller@adsc-iafd .com
469.359.6000 adsc-iafd.com 8445 Freeport Parkway, Suite 325 | Irving, TX 75063