Table of Contents - Analytics Corporation

V02-01-15 1 800-888-8061

V02-25-15 Page 1 800-888-8061

Table of Contents

I. GENERAL INFORMATION ............................................................................... 3

1. Introduction ...................................................................................................... 3

2. Mailing/Shipping Addresses ........................................................................... 3

3. Contact Information ......................................................................................... 3

4. How to Use This Directory .............................................................................. 4

5. Discount Program ............................................................................................ 4

II. INDUSTRIAL HYGIENE SERVICES AND FEES .......................................... 5

1. General Information and Policies ................................................................... 5 1.1 Standard Turnaround Time ................................................................ 5 1.2 Shipping, Billing and Rush Multipliers ................................................ 5 1.3 Discounts for Multiple Analytes on Single Media ............................... 5 1.4 Blanks and Charges ........................................................................... 5 1.5 Method Development ......................................................................... 6 1.6 Media .................................................................................................. 6 1.7 Sampling Instructions ......................................................................... 6 1.8 Analytical Reports .............................................................................. 8 1.9 No Charge Loaner Pump Program ..................................................... 9 1.10 Laboratory Test Request (Chain of Custody) ................................... 10

2. Industrial Hygiene Test Catalog ................................................................... 12 2.1 How to Use the Test Catalog ........................................................... 12 2.2 Alphabetical Listing of Test Methods ............................................... 13 2.3 Profiles ........................................................................................... 112 2.4 Media Table .................................................................................... 116

III. PHARMACEUTICAL TESTING SERVICES .......................................... 123

V02-01-15 2 800-888-8061

V02-25-15 Page 2 800-888-8061

Table of Contents (Continued)

IV. ENVIRONMENTAL SERVICES AND FEES .......................................... 125

1. Introduction .................................................................................................. 125

2. Standard Turnaround Time ......................................................................... 125

3. Billing and Rush Multipliers ........................................................................ 125

4. Deliverable Multipliers ................................................................................. 125

5. Certifications ................................................................................................ 125

6. Sample Containers/Shipping Kits .............................................................. 125

7. Sample Kit/Cooler Return Policy ................................................................ 126

8. Sample Kit/Cooler Temperatures ............................................................... 126

9. Sample Collection and Preservation Guidelines ...................................... 126

10. How to Submit a Sample ............................................................................. 127

11. Reports and Deliverables ............................................................................ 127

12. Alphabetical Listing of Methods ................................................................. 129

V. MISCELLANEOUS SERVICES AND FEES .............................................. 149

1. Introduction .................................................................................................. 149

2. Microbiology: Bacteria in Air ...................................................................... 150

3. Microbiology: Bacteria in Water ................................................................. 151

4. Microbiology: Fungal ................................................................................... 152

5. Air Quality Testing ....................................................................................... 153

VI. SERVICE GUIDE SUMMARY ................................................................ 154

1. Standard Terms and Conditions ................................................................. 154

V02-01-15 3 800-888-8061

V02-25-15 Page 3 800-888-8061

I. General Information

1. Introduction

Analytics has been a major supplier of industrial hygiene and environmental testing services to Fortune 500 companies, government agencies, and engineering firms since 1977. This experience allows us to provide services that are both high in quality and cost effective. Analytics is proud of the reputation we have earned over the last 30 years as a result of providing our customers the best quality analytical data available in the U.S. and more than 30 countries abroad. We have over 1800 active clients and have done business with most of them for over 10 years. Analytics’ facility is one of the finest industrial hygiene and environmental laboratories in the country. We have in place the certifications, SOPs, insurance, and state-of-the art-instrumentation required to meet OSHA, NIOSH, and EPA analytical requirements. Our standard turnaround time is 3 days for Industrial Hygiene samples, and 5 days for environmental samples. Analytics has no difficulty in meeting 24-hour turnaround time as may be required.

2. Mailing/Shipping Addresses Main Office and Laboratory

Analytics Corporation 10329 Stony Run Lane

Ashland, VA 23005 800-888-8061 804-365-3000

804-365-3002 (Fax)

Remittance Address Analytics Corporation

PO Box 25249 Richmond, VA 23260-5249

Website www.analyticscorp.com

Federal Tax ID #36-4359432 DUNS #151052102

3. Contact Information

All personnel can be reached via our toll free number – 800-888-8061. James McCarthy, President – x5201 Jeffrey Spink, CEO – x5004 Andrew Teague, CIH, Industrial Hygiene Technical Laboratory Director – x5226 Dawn Casto, Environmental Technical Director – x5208 Jack Simila, Sales & No Charge Loaner Pumps – x5108 Customer Service – x0

V02-01-15 4 800-888-8061

V02-25-15 Page 4 800-888-8061

4. How to Use This Directory This directory has been designed so you can find individual industrial hygiene analytes alphabetically and within profiles. Environmental analytes are sorted alphabetically and by regulation. Pharmaceutical APIs and surrogates are sorted alphabetically. The following information is included in the alphabetical listings:

Industrial Hygiene: Analyte, CAS #, Recommended Media, Suggested Volume, Sampling Rate, LOQ, Analytical Method, Analytical Technique, Lab Code, and Comments. Environmental: Analyte, Method, Sample Container and Volume Requirements, Preservation, Holding Times, and Limits of Quantitation. Pharmaceutical: Compound, Media, Reporting Limit, Method.

Please refer to the Data Deliverables Section at the end of both the IH and Environmental Services and Fees sections for a complete listing of our data package options. We can provide your data via fax, e-mail, or CD-ROM. Our data package turnaround time is contingent upon the data package level required.

5. Discount Program Please note that all prices listed in this Directory of Services are our list/non-discounted prices. Client discounts may be available and are based on your annual volume of business. Please contact our Sales personnel to discuss volume related discounting.

V02-01-15 5 800-888-8061

V02-25-15 Page 5 800-888-8061

II. Industrial Hygiene Services and Fees

1. General Information and Policies As you know, an industrial hygiene laboratory analyzes samples taken in the workplace environment. Since results of these analyses are used to determine the magnitude or presence of a problem in the workplace environment, it is vital that the laboratory analyzing the samples be proficient in producing high quality data on which important health decisions will be based. Our accreditation from AIHA is a mark of that capability. The AIHA accreditation shows that the laboratory has met defined standards for performance based on examination of a variety of criteria. When an IH laboratory is accredited by AIHA, it becomes part of a select group that have proven a high level of professional performance can be achieved and maintained.

1.1 Standard Turnaround Time Analytics standard turnaround time for most industrial hygiene analyses is 3 business days from sample receipt at the laboratory. Faxed, e-mail, or verbal results are available by the close of business on the due date. A hard copy of the report will follow by mail.

1.2 Shipping, Billing and Rush Multipliers Analytics will cover the cost of STANDARD OVERNIGHT FedEx return shipment to the laboratory of six (6) or more samples shipped within the United States. All other overnight delivery services charged on Analytics’ accounts will be billed at the courier’s published rate. Clients may request monthly billing or individual invoices by sample group. Pricing is subject to change based on the current state of the economy. Billing by sample group is assumed unless otherwise requested. Billing terms are payable net 30. Acceptable forms of payment include check, money order, wire transfer, VisaTM, MasterCardTM, DiscoverTM or American ExpressTM. Samples requiring rush or priority turnaround time must be scheduled prior to sample submission. The following charges will apply:

2 Day Turnaround Time 1.75 x price 1 Day Turnaround Time 2.00 x price Same Day Turnaround Time 3.00 x price Weekend Analysis 3.00 x price + $300 Holiday Analysis 3.00 x price + $300

1.3 Discounts for Multiple Analytes on Single Media Analysis of multiple compatible analytes captured on one medium is available at a discounted fee. The higher priced analyte is billed at the published fee with additional analytes discounted as follows:

Organics by GC 50% of the published fee Inorganics by ICP 50% of the published fee Inorganics by ICP/MS 50% of the published fee Inorganics by GFAA 50% of the published fee

Analytes by IC/HPLC 50% of the published fee

Other discounts may apply based on the volume and types of samples.

1.4 Blanks and Charges Blanks act as a control for analysis by accounting for contamination that can occur during handling, storage or shipment of samples. Therefore, they are recommended as standard industrial hygiene practice. Please handle them the same as samples, but draw no air through

V02-01-15 6 800-888-8061

V02-25-15 Page 6 800-888-8061

them. Submit one blank with each sample group of 10 or less, two blanks with 11-20 samples, etc. (i.e., 10% blanks). Since blanks are analyzed as any other sample in the laboratory, they are priced according to the analysis requested. Additional support documentation, including instrument calibration, chromatograms, etc. is available at a preparation charge of 20% of the total analytical cost. Analytics reserves the right to refuse to process any sample, which is deemed by the laboratory to be non-compliant with the quality assurance requirements. In such cases, client services will notify the client. If sample issues cannot be resolved, the client may be billed a sample-handling fee for costs incurred up to that point.

1.5 Method Development Analytics has over 500 methods currently in service. It has always been our policy to develop new routine methods at no charge, assuming adequate demand. In addition, we can develop very specific/one of a kind methods for a standard fee plus expenses.

1.6 Media Standard filter cassettes, sorbent tubes, specialized filters and tubes are supplied free if the samples are returned for analysis. Fees for organics are based on small charcoal tube analysis – there is an additional charge of $8.00 for large charcoal tubes. Diffusive (passive) monitor fees are not included in the analytical unit price and are billed at the time of shipment. Media can be shipped via ground service at no charge. A purchase order or credit card authorization may be required prior to the shipment of media. Media that has been supplied free and not returned for analysis to our laboratory after thirty days will be billed at current manufacturer published prices. See Section 2.4 - Media Table, which provides part numbers, descriptions and pricing for sampling media.

1.7 Sampling Instructions The Analytics technical staff is available to discuss sampling strategies, sample requirements, and laboratory capabilities. Please direct inquiries through client services. The volume of air to be collected for your samples is based on a number of factors, including:

• Threshold Limit Value (TLV) or Permissible Exposure Limit (PEL) • Sensitivity of the analytical procedure • Capacity of the collection device • Concentration range to be measured

The recommendations for air volumes, sampling rates and suggested media within this directory are provided for your convenience and are intended only as a guide to sample collection. With few exceptions, these air volumes enable the laboratory to report one-tenth of the TLV as the detection limit.

Fees for analyses of samples submitted on sorbent tubes include separate desorption, analysis, and reporting of both front and back sections. Clearly label every tube, badge, vial, or sample container with your sample field number or your identification number. This number should also be printed on the chain of custody. To facilitate testing and reporting, please type or clearly print all required information on the Laboratory Test Request/Chain of Custody (COC) form (an example immediately follows this section or our website www.analyticscorp.com). To initiate the COC, fill out and sign the appropriate sections designating time, date, and requested analysis. Submit the original with

V02-01-15 7 800-888-8061

V02-25-15 Page 7 800-888-8061

your samples and retain the copy for your records. The COC form should be submitted with each group of samples using a separate form for each sample type. 1.7.1 Solid Sorbent Tube Sampling Solid sorbent tubes include large and small charcoal tubes, porous polymer tubes such as XAD and XAD-7, large and small silica gel tubes, DNPH (dinitrophenyl hydrazine) tubes, Orbo tubes, Porapak Q, Tenax tubes, Firebrick tubes, Hydrar tubes and Florisil tubes. Sampling should be performed in the following manner:

1. Calibrate each pump at the recommended flow rate for the analyte of interest, using a

representative solid-sorbent tube in-line. Calibrate each pump with a bubble meter or equivalent flow measuring device.

2. Break the ends of the solid sorbent tube immediately before sampling. The openings should be at least ½ of the internal diameter of the tube. Use a tube tip breaker or file.

3. Connect the solid sorbent tube to the tube holder, making sure the smaller sorbent section (backup section) is nearest the pump. The air that is being sampled should not pass through any hose or tubing before entering the solid sorbent tube. To avoid channeling and premature breakthrough, position the tube vertically during sampling.

4. Prepare field blanks by breaking the ends of tubes from the same lot as the tubes that are being used for sampling. Handle the blanks in the same manner as the samples, but do not draw air through the blanks.

5. Sample at an accurately known flow rate for the length of time necessary to obtain the specified air volume. Check the pump periodically during sampling to detect any changes in flow rate. If the accurate measurement of volume cannot be determined due to inconsistent flow rates, discard the sample.

6. Be sure to keep an accurate record of sampling data including sample location, beginning and ending times of air sampling, temperature, relative humidity, atmospheric pressure or elevation above sea level, and name of employee.

7. Seal the ends of the tubes with plastic caps immediately after sampling. Clearly label each sample with an appropriate identification number. Label each blank tube as a blank.

8. Pack the tubes tightly for shipment to the laboratory, with adequate packing to minimize the possibility of breakage. Enclose a completed sample analytical request form (chain of custody) with each batch.

9. Bulk samples are recommended when sampling chemical mixtures such as fuel oil, kerosene, etc. When it is necessary to ship a bulk sample along with the air samples, the bulk sample must be shipped in a separate package to avoid possible cross contamination.

1.7.2 Sampling Using Filters Filters include glass fiber filters, Teflon filters, mixed cellulose ester membranes, polyvinyl chloride filters, and treated filters and pads.

Sampling with filters can be done open or closed faced. Open-faced sampling is done with three (3) piece cassettes with just the top of the cassette removed. Closed-faced sampling is performed with only the buttons removed from the cassette. Open-faced sampling is used in situations where even dispersal of the analyte over the filter is desired, such as in asbestos sampling or on certain coated filters such as for isocyanate sampling. Closed-faced sampling is performed in most cases of particulate sampling, which deposits the analyte near the center of the cassette.

Sampling should be performed in the following manner:

1. Calibrate the sampling pump at the recommended flow rate with a representative filter in line

using a bubble meter or equivalent flow measuring device.

V02-01-15 8 800-888-8061

V02-25-15 Page 8 800-888-8061

2. Remove the cassette buttons (closed faced sampling) or cassette top (open faced sampling). Air being sampled should not pass through any hose or tubing before entering the cassette.

3. Attach the cassette to the sampling pump using flexible tubing or a cassette holder, making sure the filter pad end of the cassette is closest to the pump.

4. Prepare field blanks using cassettes from the same lot by briefly removing and replacing cassette buttons and handling these blanks in the same manner as the samples, without drawing air through the blanks.

5. Sample at a known flow rate for the length of time necessary to obtain the specified air volume, or until there is evidence of excessive filter loading. Check the pump during sampling to detect any changes in flow rate. If the accurate measurement of volume cannot be determined due to inconsistent flow rates, discard the sample.

6. Disconnect the filter after sampling. Replace the buttons (or top) and properly label the sample and blanks. Be sure to keep an accurate record of sample data including sample location, beginning and ending times or air sampling, temperature, relative humidity, atmospheric pressure or elevation above sea level, and name of employee or area.

7. Ship the samples to the laboratory as soon as possible in a container designed to prevent damage in shipment. Enclose a completed chain of custody with each batch.

1.7.3 Sampling for Respirable Aerosols Respirable aerosol sampling is performed using a cyclone and filter sampler. Sampling for respirable aerosols should be performed in the same manner as sampling a filter except:

1. Calibrate each pump at the flow designated by the type of cyclone being used with a

representative cyclone and filter in line. Note that the filter is mounted upside down with the cyclone in place.

2. Inspect the interior of the cyclone. If there is visible scoring or damage inside, discard the cyclone since the dust separation characteristics may have been altered. Clean the interior of the cyclone.

3. Attach the cyclone to the filter according to the manufacturer’s instructions. Connect the assembly to the sampling pump. During sampling, make sure the cyclone hangs vertically and that the assembly does not get inverted during sampling. If an accurate and consistent flow rate cannot be maintained, discard the sample.

1.7.4 Sampling for Inhalable Aerosols We can provide pre-weighing of inhalable samplers, as well as post-weighing. Contact the laboratory for details on this relatively new technique.

1.8 Analytical Reports

Most clients have their data reported on our standard report, which includes total mass of analyte on each collector section, limits of quantitation, method reference and calculated air concentration. If you need additional data or would like a different format, please contact our customer service department at 800-888-8061, x0 and they will be able to assist you with your request. All laboratory reports, sample data and client proprietary information are held in confidence. Raw data for all analytical results will be retained for a period of 5 years. If data needs to be retained for a longer period, contact client services.

V02-01-15 9 800-888-8061

V02-25-15 Page 9 800-888-8061

1.9 No Charge Loaner Pump Program

Analytics offers a No Charge Loaner Pump Program. This program will provide you with everything you need for air sampling analysis–pumps, sample media, all accessories, and instructions, custom packaged to your requirements, shipped to you as you need it. You pay only for shipping and, of course, the analysis – there is absolutely no cost to use the pumps and accessories. To order your pumps, all you need to do is contact Jack Simila at 800-888-8061, x5108. Your order will include the pumps (as many as you need, all fully charged and pre-calibrated), tubing, sample media, sample media holders, pumps, chargers, instructions, cyclones, splitters, low flow regulators, tube breaker, tool kit, chain of custody form and calibrated field rotameter, all packed in a sturdy carrying case. Pumps are normally sent out the same day. Please keep in mind the more notice you provide, the less expensive shipping charges will be. Typical shipping costs for a sampling set that includes five pumps and is shipped across the country (VA to CA) with 2nd day delivery is about $40. We use primarily SKC AirCheck 52 sampling pumps, which handle flows in the range of 25 to 3000 ml/min with a backpressure of 25" water at 2 liters per minute. They weigh 20 ounces and have a timer, flow fault feature and NiCad or NiMH battery with a battery-check feature. Other pumps are available on request. The pumps arrive fully charged and calibrated versus a primary standard, with a record of calibration in the shipment. A field rotameter, calibrated against a primary standard, is included in the sampling kit. Post calibration can be performed and reported if you request it on your chain of custody when you return the samples and pumps. The pumps and all accessories can be kept for the duration of your sampling project. As long as you are collecting and submitting for analysis daily samples, you may use the pumps indefinitely. If your project is postponed, you will need to call to confirm availability. Depending on the length of the time delay, you may need to return everything to us, but we will re-ship the entire sampling kit to you for your new scheduled date.

V02-01-15 10 800-888-8061

V02-25-15 Page 10 800-888-8061

1.10 Laboratory Test Request (Chain of Custody)

Sample Custody is a set of procedures used to provide an accurate written record that can be used to trace the possession of a sample from the time of collection through its introduction into a data set. The Laboratory Test Request/Chain of Custody is used to record the transfer, possession, and custody of samples to ensure their integrity from collection through data reporting. Until you relinquish custody, you are responsible to ensure no one tampers with your samples. Custody is a critical part of the process because data reported without a complete and accurate chain of custody will not withstand legal challenge. The following items must be completed on the chain in order to ensure sample integrity and accurate analysis/reporting:

1. Date Shipping Samples

2. Total Number of Samples

3. Type of Media

4. Project Name or Number

5. PO or Release Number

6. Contact – Who the Report Will be Sent to

7. Telephone Number

8. Turnaround Time Required

9. Special Instructions, if needed

10. Where to fax/e-mail results

11. Sample ID or Sample Number

12. Sample Date

13. Sample volume

14. Analysis

15. Initiate COC

16. Laboratory Receipt Information (for laboratory use)

V02-01-15 11 800-888-8061

V02-25-15 Page 11 800-888-8061

V02-01-15 12 800-888-8061

V02-25-15 Page 12 800-888-8061

2. Industrial Hygiene Test Catalog

2.1 How to Use the Test Catalog

This section is composed of several categories of information that allows the user to access the necessary parameters for industrial hygiene air sampling. The guide has been arranged to make it as easy as possible for the user. For many categories, abbreviations are used to facilitate a concise format. The following descriptions give the relevant information pertaining to each category in order of appearance in the guide.

Analyte & CAS#

This category will give the name of the compound to be analyzed and the corresponding CAS#. In cases where there are other names for a compound, there may be a redirection to another place in the guide. Recommended Media This category specifies the method recommended collection media for air sampling of the particular compound. Abbreviations used in this category are defined in the Section 2.4 Media Table.

Suggested Volume, L This category specifies the method recommended air volume to be sampled in liters. In many cases, this recommended volume can be at least doubled before breakthrough occurs. In high relative humidity locations or with very high volatile compounds, this recommended volume should not be exceeded.

Sampling Rate, LPM This sampling range indicates the minimum and maximum flow rate of the sampling pumps used in liters per minute.

LOQ (Limit of Quantitation) This category lists the lowest quantifiable sampling media loading (also known as Reporting Limit, RL) that will be reported (typically in micrograms) per sample. Samples measured below this loading will be reported as “<” values.

Method & Technique This category specifies the method used to analyze the compound listed in the test category. The “NIOSH” designation refers to methods described in the National Institute of Occupational Safety and Health Manual of Analytical Methods. The “OSHA” designation refers to methods described in the Occupational Safety and Health Administration Methods Manual. “SPM” designates a special method or an in-house method developed and validated by Analytics. An “M” in parentheses after the method designation refers to a modification of the method that has been validated by Analytics.

This category also gives abbreviations for the analytical technique and instrumentation used for the analysis of the compound listed in the test category.

Lab Code (Compatibility) This category gives the option to the user of sampling more than one compound on a specific sampling media. In order to do so, not only must the same sampling media be specified for each compound, but the Compatibility letter designations given in this category must match for each test compound to be sampled. Particular attention must be given to other parameters of the individual compounds such as sample volume and flow rate in order to ensure sample validity. Care must be taken to make sure that no flow rate or air volume parameter for an individual

V02-01-15 13 800-888-8061

V02-25-15 Page 13 800-888-8061

compound is exceeded when sampling for two or more compounds. The exception to the Lab Code list is NC, which means the analyte is not compatible with other compounds. Due to the frequency of questions on substance compatibility (analytes or compounds that can be sampled on the same collection media), we have included a compatibility code in this edition of the sampling guide. Please see the “Lab Code” column in the list of individual air contaminants for information on individual analytes and compounds. Listed below is the compatability code key. When two or more substances have the same Recommended Media and same the Lab Code, they can be sampled together and are eligible for a discounted price (see terms and conditions section for details). Code Desorbing Solution Code Desorbing Solution A Carbon disulfide (CS2) AA Sodium Thiosulfate B CS2 + 1% 2-Butanol CC Toluene C CS2 + 1% 2-Propanol EE OSHA ID125G Acid Digestion D CS2 + 5% 2-Propanol FF 0.1N Potassium Hydroxide E Methylene Chloride + 5%

Methanol HH Acetone

F CS2 + 1% Dimethylformamide II Methylene Chloride + 15% Methanol

H CS2 + 1% Methanol JJ 50% Methanol + 50% Water I Methylene Chloride KK 50% Isopropanol + 50% Toluene J Water-soluble Metals Prep LL CS2 + 2% Acetone K Methanol MM Benzene M Ethanol NN Di-n-Butylamine Derivatization N Acetonitrile OO Aqua Regia Acid digestion O Acetonitrile + 10%

Dimethylsulfoxide

P Isooctane Q Methanol + 20% water NC Prep Not Compatible With

Additional Tests S Hexane T NIOSH 7300M Acid Digestion U Bicarbonate/carbonate Eluent V Sodium borate Eluent W Tetrahydrofuran X 0.01N Sodium Hydroxide Y Methanesulfonic Acid Eluent

2.2 Alphabetical Listing of Test Methods

Analytics is pleased to offer an extensive array of Industrial Hygiene analyses, including most OSHA, NIOSH, ASTM, and EPA methods and also numerous proprietary methods. Specific analytical tests are listed in the following sections. Lists of tests are presented in the Sections that follow here; Section 2.2 provides an alphabetical list by analyte, and Section 2.3 provides a listing of our profiles. Please note that for most tests Analytics does not require a minimum sample fee.

Volume discounts are available depending on the annual volume or scope of your project.

Please contact our sales department or your project manager for details.

V02-01-15 14 800-888-8061

V02-25-15 Page 14 800-888-8061

Alphabetical Listing

of

Industrial Hygiene Tests

V02-01-15 15 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Acenapthene 83-32-9

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC

N $110.00 Wrap cassettes with foil if sampling in bright sunlight. Transfer filter to glass vial immediately after sampling, and wrap tube and vial with aluminum foil to protect from light. Store samples cold and ship samples cold for overnight delivery.

Acenapthylene208-96-8

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


Acetaldehyde 75-07-0

T-119 DNPH-Treated

Silica Gel, 226-119

2 - 15 0.2 - 1.0 0.2 EPA TO-11 HPLC

N $110.00 Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concentrations of acetone or MEK will compete with aldehyde and are therefore potential negative interferences. Refrigerate media before and after sampling and ship cold overnight. High ozone level may necessitate ozone scrubber.

UMEX-100 SKC UMEX

Aldehyde PM 500-100

Up to 8 hours 0.0231 0.2 EPA TO-11 HPLC

N $110.00 Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concentrations of acetone or MEK will compete with aldehyde and are therefore potential negative interferences. Refrigerate media before and after sampling and ship cold overnight. High ozone level may necessitate ozone scrubber.

Acetic Acid 64-19-7

T-01 Charcoal, 226-01

5 - 48 0.2 Max. 5 OSHA ID 186SG M

IC

V $66.00 Preferred method. Use PTFE prefilter (PN C-29) to remove particulate acetates, if present. Particulate acetates can be measured on filter, otherwise discard after sampling. Formic Acid can also be determined but must be stored and shipped cold overnight.

T-10-03 Prewashed Silica Gel, 226-10-03

1 - 24 0.05 - 0.2 5 NIOSH 2011M

IC

V $66.00 Use PTFE prefilter (PN C-29) to remove particulate ace-tates, if present. Particulate acetates can be measured on filter, otherwise discard after sampling. Formic Acid can also be determined.

Acetic Anhydride 108-24-7

C-28 GFFs (2),

amine-treated, 37mm, 4PC, C-28

TWA-15 Max Stel-7.5 Max

0.050 Max 0.50 Max

10 OSHA 102M HPLC/UV

KK $95.00 Closed face sampling. Interference from ketene and acetyl chloride. Limited shelf life media; store cold. Ship samples cold overnight to the lab.

Acetoin 573-86-0

T-183 (2 in Series)

Custom Silica Gel, 226-183

TWA-9 Max Stel-3 Max

0.050 Max 0.20 Max

0.4 OSHA Method 1012

GC-ECD

NC $105.00 Protect from light during sampling and storage (wrap with foil). Store and ship samples cold. Ship overnight. May be sampled on same tube with diacetyl. Filter built into tube faces incoming air streams.

V02-01-15 16 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Acetone 67-64-1


0.5 - 3 0.01 - 0.2 20 NIOSH 1300 GC/FID

A $53.00

O-91 Carbosieve S-III,

Orbo 91

3 Max 0.05 Max. 20 OSHA 69 GC/FID

F $53.00

M-3520 3M POVM 3520,

2-stage

2 Hours Max (at PEL)

0.0401 30 NIOSH 1300M GC/FID

A $53.00 Keep samples cold and expedite analysis for optimum results.

M-02 SKC POVM,

575-002

8 hours Max 0.0152 20 Proprietary, IHGC-P029

GC/FID

A $73.00

Acetone Cyanohydrin, As CN 75-86-5

IMP-06 MFGB, 0.1N KOH

90 TWA 180 Max

0.5-1 TWA 1 CEIL

14 NIOSH 7904 ISE

NC $77.00

Acetonitrile 75-05-8


3 - 25 0.01 - 0.2 20 NIOSH 1606 GC/FID

II $53.00

M-01 SKC POVM,

575-001

15 min - 8 hours

0.0224 10 NIOSH 1606M GC/FID

II $53.00

M-3520 3M POVM 3520,

2-stage

2 Hours Max 0.0482 30 NIOSH 1606M GC/FID

II $53.00

Acetylene Tetrabromide 79-27-6

$- See 1,1,2,2-Tetrabromoethane.

Acetylacetone 123-54-6

T-95 XAD-7, 226-95

24 TWA 3 STEL

0.05-0.1 TWA 0.2 CEIL

5 OSHA 7M GC/FID

HH $73.00 Also known as 2,4-Pentanone.

Acid Mist (Inorganic Acid Profile) See Inorganic Acid Profile in Section 2.3

Profile includes Hydrobromic Acid, Hydrochloric Acid, Hy-drofluoric Acid, Nitric Acid, Phosphoric Acid, Sulfuric Acid. Also see individual acids.

V02-01-15 17 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Acrolein 107-02-8

T-119 DNPH-Treated

Silica Gel, 226-119

2 - 30 0.2 - 1.0 0.25 EPA TO-11M HPLC/UV

N $110.00 Result may be biased low due to instability of acrole-in-DNPH derivative. Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concen-trations of acetone or MEK will compete with aldehyde and are therefore potential negative interferences. Refrigerate media before and after sampling and ship overnight.

T-117 HMP XAD-2,

226-117

48 TWA 3 STEL

0.1 TWA 0.2 STEL

1 OSHA 52 GC/NPD

CC $97.00 Preferred method. Can also be analyzed for formalde-hyde. Store media cold before use.

UMEX-100 SKC UMEX Aldehyde

PM 500-100

Up to 8 hours 21.2 0.2 EPA TO-11M HPLC/UV

N $110.00 Result may be biased low due to instability of acrole-in-DNPH derivative. Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concen-trations of acetone or MEK will compete with aldehyde and are therefore potential negative interferences. Refrigerate media before and after sampling and ship overnight.

Acrylamide 79-06-1

T-99 GFF/Silica Gel OVS, 226-99

96 TWA 15 STEL

0.2 TWA 1.0 STEL

0.40 Proprietary, IHHPLC-P003

HPLC/UV

NC $152.00 Methylolacrylamide may also be tested along with acryl-amide.

T-57 GFF/XAD-7 OVS,

226-57

120 Max 1.0 Max 0.4 OSHA PV2004

HPLC/UV

NC $110.00

Acrylic Acid 79-10-7

T-30-08 (2) Anasorb 708,

226-30-08, 2 tubes in series

24 0.1 2 OSHA PV2005

HPLC/UV

K $110.00 Two identical tubes sampled in series. Low results due to polymerization of acrylic acid on the sampling tube may result from the presence of initiators collected. Methacrylic acid may also be tested along with acrylic acid.

T-49-108 Chromosorb 108,

226-49-108

20 TWA 4.5 STEL

0.03-0.3 TWA 0.3 STEL

3 Proprietary, IHHPLC-P005

HPLC/UV

JJ $152.00 Methacrylic acid can be collected and analyzed along with acrylic acid using this sampling protocol (see lower recom-mended sampling volume for methacrylic acid).

Acrylonitrile 107-13-1


6 - 20 0.2 1 OSHA 37 GC/NPD

HH $95.00 Preferred method.

M-3500 ‘3M POVM 3500

Up to 8 hours 0.04 1.5 OSHA 37M GC/NPD

HH $95.00

M-02 SKC POVM,

575-002

Up to 8 hours 0.0204 2.5 Proprietary, IHGC-P029

GC/FID

A $73.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL

1.25 Proprietary, IHGC-P029

GC/FID

A $73.00

V02-01-15 18 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Aldehyde Profile See Aldehyde Profile in Section 2.3

T-119 DNPH-Treated

Silica Gel, 226-119

16 - 30 0.2 - 1 Varies with com-

pound.

EPA TO-11 HPLC/UV

N $242.00 Profile includes Acetaldehyde, Acrolein, Butyraldehyde, Formaldehyde, Glutaraldehyde, and Isovaleraldehyde. For STEL sampling, collect a 15-minute sample at 1 LPM. Ozone may intefere - use ozone scrubber in known ozone contaminated areas. Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concentrations of acetone or MEK will compete with the al-dehyde and are therefore potential negative interferences. Refrigerate before and after sampling and ship overnight. Media contains residual acetonitrile which could interfere with acetonitrile monitoring.

Alkaline Dust (as NaOH, KOH, other) N/A

C-66 PTFE, 1um,

37mm, 2PC, C-66

70 - 1000 1.0 - 4.0 40 NaOH,

56 KOH

NIOSH 7401 Titration

NC $66.00 This test provides a single cumulative measure of all alka-line aerosols present in the exposure; e.g., sodium hydrox-ide, potassium hydroxide, sodium bicarbonate, calcium carbonate, etc. The acid-base titration test is not com-pound-specific, but the result will be expressed in terms of the alkaline compound identified on the test request form. Acid compounds present in the sampling environment will be negative interferences in the measurement.

Allyl Alcohol 107-18-6


4 - 50 0.01 - 0.2 5 NIOSH 1402 GC/FID

D $53.00 Also known as 2-Propenol.

M-3500 3M POVM 3500

Up to 8 hours 0.0404 7.5 NIOSH 1402M GC/FID

I $53.00 Also known as 2-Propenol.

Allyl Chloride 107-05-1


16-100 0.01 - 1 5 NIOSH 1000 GC/FID

MM $73.00

Allyl Chloroformate 2937-50-0

T-153 Amine-treated

XAD-2, 226-153

48 TWA 3 STEL

0.1 TWA 0.2 STEL

5 AIHAJ 12/1986,

pp.742-746 GC/FID

NN $73.00 Store media and samples cold, ship samples cold overnight. Samples must arrive at lab within 10 days of sampling.

Allyl Methacrylate 96-05-9

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00

M-02 SKC POVM,

575-002

8 hr (Max) TWA 15 min STEL

0.012 2.6 Proprietary, IHGC-P029

GC/FID

A $73.00

V02-01-15 19 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Aluminum (metal dust and fume) 7429-90-5

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 2 NIOSH 7300M

ICP-OES

T $38.00 Also see Welding Fume Profile. This analysis method is not sufficient for analysis of the alpha-alumina form of aluminum oxide which is commonly used in abrasives and refractory materials (also known as corundum).

Ammonia 7664-41-7

T-10-06 H2SO4-Treated

Silica Gel, 226-10-06

7.5 - 96 0.2 Max 2.5 NIOSH 6016 IC

NC $66.00 Capacity reduced at high humidity. Prefilter (C-50) re-quired in presence of ammonium salt particulates.



96 TWA 7.5 STEL

0.1-0.5 TWA 0.5 STEL

5 NIOSH 6015 SPEC

NC $66.00 Capacity reduced at high humidity. Prefilter (C-50) re-quired in presence of ammonium salt particulates.

T-29 Anasorb 747,

226-29

7 - 24 0.1 - 0.5 2.5 OSHA ID 188 IC

NC $66.00 Capacity reduced at low humidity. Prefilter (C-50) required in presence of ammonium salt particulates.

M-N584 Assay Ammonia

PM, AT N584

TWA-Up to 8 hours STEL 15 minutes

0.0288 2.5 NIOSH 6016M

IC

NC $66.00

Ammonium Chloride 12125-02-9

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

960 Max 2 Max 10 OSHA ID188M IC

NC $66.00 Sampling is for particulate ammonium salts, with analysis for ammonium ion; ammonium chloride equivalent is determined by calculation.

Ammonium Persulfate, as Persulfate 7727-54-0

C-10 PVC, 37mm, 5um,

3PC, C-10

480-960 TWA 60 STEL

1-4 TWA 4 STEL

2.7 NIOSH 6016M IC

NC $66.00 When submitting samples, “Ammonium Persulfate, AS PERSULFATE” needs to be specified on the Analysis Request form in order to have results reported correctly as persulfate. Analysis is for ammonium ion with “ammonium persulfate, as persulfate” determined by calculation.

n-Amyl Acetate 628-63-7


1 - 10 0.01 - 0.2 20 NIOSH 1450 GC/FID

A $53.00

M-3500 3M POVM 3500

Up to 8 hours 0.0260 30 NIOSH 1450M GC/FID

A $53.00

M-01 SKC POVM,

575-01


A $53.00

V02-01-15 20 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

sec-Amyl Acetate 626-38-0


1 - 10 0.01 - 0.2 20 NIOSH 1450 GC/FID

A $53.00

n-Amyl Alcohol 71-41-0


3 - 48 0.05 - 0.2 3.3 OSHA 7 GC/FID

A $53.00

t-Amyl Methyl Ether 994-05-8

T-09 (2 in series) Charcoal, 226-09

96 Max 0.1-0.2 20 NIOSH 1615M GC/FID

A $53.00

Aniline 62-53-3

T-10 Silica Gel, 226-10

5 - 30 0.02 - 0.2 10 NIOSH 2002 GC/FID

M $53.00

C-15 GFFs (2),

H2SO4-treated, 37mm, 3PC, C-15

5 - 50 0.1 - 0.2 20 NIOSH 2017 GC/FID

M $97.00 This arrangement allows for collection of o-toluidine on the same cassette, and a silica gel tube (226-15) may be included downstream of the cassette to trap and include nitro benzene in the analysis.

Anthracene 120-12-7

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


Antimony and Compounds, as Sb 7440-36-0

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

40 - 1000 1.0 - 3.0 2.0 OSHA ID 125 ICP

EE $38.00 Also See Welding Fume Profile

Antimony - ICP-MS 7440-36-0

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

2000 Max 1 - 4 0.05 NIOSH 7300M ICP-MS

T $49.00

Antimony Trioxide, as Sb 1309-64-4

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

240 0.5-3.0 1 OSHA ID-125 ICP

EE $38.00

Aromatic 100 N/A


5-20 TWA 3 STEL

0.01-0.2 TWA 0.2 STEL

50 NIOSH 1550 GC/FID

A $73.00 Ship 5 ml pure distillate in separate shipment for refer-ence, and note separate shipment of the bulk sample on the test request form. Also known as High Flash Aromatic Naphtha.

Aromatic 150 N/A


5-20TWA 3 STEL

0.01-0.2 50 NIOSH 1550 GC/FID

A $73.00 Ship 5 ml pure distillate in separate shipment for refer-ence, and note separate shipment of the bulk sample on the test request form.

Aromatic 200 N/A


5-20 TWA 3 STEL

0.01-0.2 50 NIOSH 1550 GC/FID

A $73.00 Ship 5 ml pure distillate in separate shipment for refer-ence, and note separate shipment of the bulk sample on the test request form.

V02-01-15 21 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Arsenic 7440-38-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

800 - 1000 1.0 - 3.0 2 NIOSH 7300 ICP

T $38.00

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 0.05 NIOSH 7300M ICP/MS

T $44.00

Arsenic Trioxide (as Arsenic) 1327-53-3

C-18 MCEF/Treated Backup, 37mm,

3PC, C-18

30 - 1000 1.0 - 3.0 0.05 OSHA ID105M GFAA

NC $49.00 Particulate arsenic collects on the MCE filter, and arsenic trioxide vapor collects on the treated pad. Particulate arsenic may be tested from the MCE filter if needed.

C-18 MCEF/Treated Backup, 37mm,

3PC, C-18

30 - 1000 1.0 - 3.0 0.05 OSHA ID105M ICP-MS

NC $49.00 Particulate arsenic collects on the MCE filter, and arsenic trioxide vapor collects on the treated pad. Particulate arsenic may be tested from the MCE filter if needed.

Arsine (as Arsenic) 7784-42-1


10 Max. 0.2 Max 0.01 NIOSH 6001M GFAA

NC $49.00 Preceed tube with arsenic trioxide cassette (see above) if particulate arsenic and/or arsenic trioxide are present. This treated filter/tube train can be tested for particulate arsenic, arsenic trioxide vapor, and arsine if needed.


120 - 240 0.5 Max 0.04 NIOSH 6001M GFAA

NC $49.00 If particulate arsenic is present, preceed tube with arsenic trioxide cassette (see above) to trap particulate arsenic and arsenic trioxide. This treated filter/tube train can be tested for particulate arsenic, arsenic trioxide vapor, and arsine if needed. The recommended sampling rate and maximum volume included here are those described in the similar method OSHA ID105.

Asbestos Bulk ID N/A

Bulk sample, approx. 1 - 3 cubic

inch volume

N/A 1.0% EPA/600/M4-82-020, Dec.

1982 PLM

NC $16.00 Sample is assumed to be homogeneous


inch volume

N/A 1.0% EPA-600/R-93/116,

July 1993 PLM

NC $16.00 Price per layer

Asbestos Bulk Point Count N/A


inch volume

N/A <1.0% EPA-600/R-93/116,

July 1993 PLM

NC $49.00

Asbestos Fiber Count See Fiber Count.

V02-01-15 22 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Asbestos Wipe/Vacuum Wipe N/A

C-01 MCEF, 25mm,

0.8um, 3PC, long cowl, C-01

N/A 10 - 16 LPM NA EPA-600/M4-82-020, Dec.

1982 PLM

NC $27.00 Presence/absence measurement only for all forms of asbestos; test requires a visible filter deposit be present.

Asphalt Fumes, measured as Total Particulate and Benzene Soluble Fraction N/A

C-09 PTFE, Pre-

weighed, 37mm, 2um, 2PC, C-09

28 - 400 1 - 4 30 NIOSH 5042 Gravimetric,

with extraction

MM $105.00 Ship refrigerated for overnight delivery. For benzene solubles results above 0.2 mg/M3, client may elect to run the PAH screen. If PAHs are desired, wrap cassette in foil during sampling to protect from light. Includes total particulate and benzene solubles reporting.

Barium, Total 7440-39-3

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 2 NIOSH 7300 ICP

T $38.00

Barium Sulfate - Respirable 7727-43-7

- $- See Particulates, Respirable. Sample may also be tested for Total Barium, but test is not specific for barium sulfate.

Barium Sulfate - Total 7727-43-7

- $- See Particulates, Total. Sample may also be tested for Total Barium, but test is not specific for barium sulfate.

Barium, Soluble Compunds 7440-39-3

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

300 1.5 3 NIOSH 7300M ICP

J $65.00 Measurement of water-soluble barium compounds.

BCME 542-88-1

- $- See Bis(Chloromethyl)Ether

Benzaldehyde 100-52-7

T-119 DNPH-Treated

Silica Gel, 226-119

2 - 30 0.2 - 1.0 1.00 TO-11 HPLC N $110.00 Refrigerate before and after sampling and ship overnight. Ozone may intefere - use ozone scrubber in known ozone contaminated areas. Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concentrations of acetone or MEK will compete with the al-dehyde and are therefore potential negative interferences. Media contains residual acetonitrile which could interfere with acetonitrile monitoring.

V02-01-15 23 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Benzene 71-43-2


2 - 30 0.01 - 0.2 2 NIOSH 1501 GC/FID

A $53.00

M-01 SKC POVM,

575-001

15 - 240 Min. 0.016 4.0 NIOSH 1501M GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

T-81 Anasorb 747,

226-81

30 TWA 3 STEL

0.03-0.2 1.1 Proprietary, IHGC-P029

GC/FID

A $73.00

M-02 SKC POVM,

575-002

15 - 240 Min. 0.0171 2.2 Proprietary, IHGC-P029

GC/FID

A $73.00

Benzene Soluble Fraction N/A

C-06 GFF, 37mm, 1um,

3PC, C-06

960 1 - 2 50 OSHA 58 Gravimetric

with extraction

MM $110.00 This is the same test as Coal Tar Pitch Volatiles by OSHA 58. Transfer filter into glass vial using tweezers immedi-ately after sampling; wrap vial in foil to protect from light. Additional specific PAH analysis is available as follow-up if needed for samples with BSF exceeding 0.2 mg/M3.

C-09 PTFE, Pre-


28 - 400 1 - 4 50 NIOSH 5042 Gravimetric

with extraction

MM $110.00 Test includes measurement of Total Particulates and Benzene Soluble Fraction. This is the NIOSH approach for both Coal Tar Pitch Volatiles and Asphalt Fumes. Protect samples from light if follow-up PAH analysis is needed.

Benzidine 92-87-5


2PC Swinnex, C-07

20 - 100 0.2 0.2 NIOSH 5509 HPLC

NC $110.00 Ship on dry ice by overnight delivery.

1,2-Benzisothiazolin-3-one (BIT) 2634-33-5


96 TWA 15 STEL

0.2 TWA 1.0 STEL

0.3 IHO-HPLC-070 HPLC/UV

K $152.00

Benzo(a)anthracene 56-55-3

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


Benzo(b)fluoranthene 205-99-2

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


V02-01-15 23 800-888-8061

V02-01-15 24 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Benzo(k)fluoranthene 207-8-9

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


Benzo(g,h,i)perylene 191-24-1

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


Benzo (a) pyrene 50-32-8


3PC, C-06

960 2.0 3 OSHA 58 HPLC/FL

MM $110.00 Place filter into glass vial using tweezers and wrap with foil to protect from light. Ship refrigerated by overnight delivery. Also see selected PNA Profile.

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


Benzophenone 119-61-9

T-110 Chromosorb 106,

226-110

48 Max 0.2 Max 1.6 OSHA PV2130 GC/FID

NC $53.00

Benzoyl Chloride 98-88-4

226-153 Amine-treated

XAD-2, 226-153

24 Max 0.05 Max 5 AIHAJ 12/1986,

pp.742-746 GC-FID

NN $73.00 Other chloroformates/acid chlorides may be tested from the same sample. Store media and samples cold, ship samples cold overnight. Samples must arrive at lab within 10 days of collection.

Benzoyl Peroxide 94-36-0

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

40 - 400 1 - 3 1 NIOSH 5009 HPLC/UV

NC $110.00 Ship refrigerated for overnight delivery. Synonym: Diben-zoyl peroxide.

Benzoyl Peroxide - Inhalable 94-36-0

Call lab 960 Max 2.0 1 NIOSH 5009M HPLC

NC $110.00 Important Note: 1. The IOM sampler should be operated at 2 Lpm in order to correctly collect the particle size range (up to 100 um) which comprises inhalable particles. 2. This listing modifies NIOSH method 5009, which does not take into account monitoring of inhalable particulates. The maximum air volume of 400 L recommended in method 5009 has been increased to 960 L in this listing in order to allow for a full-shift sample at the 2 Lpm sampling rate required for the IOM sampler. However, if analytical results show a filter loading of 1 to 2 milligrams or greater, consid-er resampling for a shorter time period. 3. If available, ship samples by overnight delivery to the lab in an insulated container with cold pack (9% loss of material from filter has been measured after 1 week @ 25 C).

V02-01-15 25 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Benzyl Acetate 140-11-4


10 - 50 0.1 - 0.2 20 OSHA CSI GC/FID

A $53.00

Benzyl Alcohol 100-51-6


10 - 24 0.01 - 0.2 20 NIOSH 1402M GC/FID

D $53.00

T-95 XAD-7, 226-95

24 TWA 4.5 STEL

0.02-0.1 TWA 0.3 STEL

2 OSHA 32M HPLC

K $110.00

Benzyl Chloride 100-44-7


6 - 50 0.01 - 0.2 5 NIOSH 1003 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Benzylchloroformate 501-53-1

T-153 Amine-treated

XAD-2, 226-153

48 TWA 3 STEL

0.1 TWA 0.2 STEL

5 AIHAJ 12/1986,

pp.742-746 GC/FID


Beryllium 7440-41-7

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

200 - 2000 1.0 - 4.0 0.005 NIOSH 7300M ICP/MS

T $44.00 Not appropriate for monitoring “high-fired” beryllium oxide. When monitoring “high-fired” beryllium oxide (such as manufactured for use in ceramics in electronic applica-tions, and in lasers), contact the lab prior to sampling. The combination of digestion technique/analytical technique/method sensitivity must be carefully chosen to obtain accurate results. Contact lab for further information.

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

200 - 2000 1.0 - 4.0 0.1 OSHA ID125M

ICP

EE $38.00 This approach is suitable for analysis of high-fired berylli-um oxide.

Beryllium - Wipe 7440-41-7

K-07 Ghost Wipe Kit

100 cm2 - 0.01 NIOSH 7102M GFAA

T $49.00 This approach is NOT suitable for analysis of high-fired beryllium oxide.

K-07 Ghost Wipe Kit

100 cm2 - 0.1 OSHA ID125M

ICP

EE $38.00 This approach is suitable for analysis of high-fired berylli-um oxide.

Biphenyl 92-52-4

$- See Diphenyl.

Bis (Chloromethyl) Ether (BCME) 542-88-1

T-89 TCP-treated XAD-

4, 226-89

20 TWA 4.5 STEL


GC/ECD

NC $146.00 Immediately after sampling heat treat tube(s) at 75°C for 45 minutes. Wrap in aluminum foil to protect from light. Chloromethyl Methyl Ether can be determined on same tube.

V02-01-15 26 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Bismuth 1304-82-1

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 2 NIOSH 7300M

ICP

T $38.00

Bisphenol A 80-05-7


3PC, C-06

300 1.6 2 NIOSH PCAM 333

HPLC

N $110.00

Boron 7440-42-8

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 500 1.0 - 3.0 2 NIOSH 7300M

ICP

T $38.00

Bromine 7726-95-6

IMP-09 Impinger, NaH-CO3/Na2CO3

80 - 240 0.5 7.5 OSHA ID 108 IC

NC $66.00 Impinger solution available from laboratory.

C-16 Ag/PTFE, Cl2 / Br2 Sampler,

25mm, 3PC, C-16

15 - 360 0.3 - 1.0 5.0 NIOSH 6011 IC

AA $66.00 Preferred method. Precleaning of filter required prior to shipment. Cassette has short shelf life. Avoid direct sunlight on filter during or after sampling. Chlorine can also be measured as well as bromine.

Bromoethane 74-96-4

- $- See Methyl Bromide

Bromoform 75-25-2


4 - 70 0.01 - 0.2 20 NIOSH 1003 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Bromomethane 74-83-9

$- See Ethyl Bromide

1-Bromopropane106-94-5


12 Max 0.2 Max 0.5 NIOSH 1011M GC/FID

A $53.00 The larger charcoal tube 226-09 may be used for greater capacity at higher concentrations.

M-3500 3M POVM 3500


A $53.00 3M 3520 is recommended for 8-hour samples collected at high humidity (>80%).

V02-01-15 27 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

BTEX Profile N/A


5 - 15 0.05 - 0.2 See com-ments

NIOSH 1501 GC/FID

A $121.00 Profile includes Benzene (LOQ = 2 ug), Ethyl Benzene (LOQ = 5 ug), Toluene (LOQ = 5 ug), Xylene (LOQ = 5 ug), Total Hydrocarbons as Hexane (LOQ = 20 ug).

M-01 SKC POVM,

575-001

Up to 8 hours Various See com-ments

NIOSH 1501M GC/FID

A $121.00 Profile includes Benzene (LOQ = 4 ug), Ethyl Benzene (LOQ = 10 ug), Toluene (LOQ = 10 ug), Xylene (LOQ = 10 ug), Total Hydrocarbons as Hexane (LOQ = 40 ug).

M-3500 3M POVM 3500

Up to 8 hours Various See com-ments

NIOSH 1501M GC/FID

A $121.00 Profile includes Benzene (LOQ = 3 ug), Ethyl Benzene (LOQ = 7.5 ug), Toluene (LOQ = 7.5 ug), Xylene (LOQ = 7.5 ug), Total Hydrocarbons as Hexane (LOQ = 30 ug).

1,3-Butadiene 106-99-0

T-73 TBC-Treated

charcoal, 226-73

3 Max 0.01 - 0.05 2 OSHA 56 GC/FID

A $53.00 Preferred method. Store collected samples under refriger-ation, and ship refrigerated overnight. Samples are stable at least 17 days if stored cold.

T-09 (2) Charcoal,

226-09

5 - 25 0.01 - 0.5 8 NIOSH 1024 GC/FID

I $53.00 Two 226-09 tubes in series; cap separately after sampling. Ship cold overnight, store in freezer after sampling.

M-3520 3M POVM 3520,

2-stage


I $53.00

1,3-Butanediol 107-88-0

- $- See 1,3-Butylene Glycol

1,4-Butanediol 110-63-4

- $- See 1,4-Butylene Glycol

n-Butanol 71-36-3

- $- See n-Butyl alcohol

Sec-Butanol 78-92-2

- $- See sec-Butyl Alcohol.

t-Butanol 75-65-0

- $- See tert-Butyl alcohol.

2-Butanone 78-93-3

- $- See Methyl Ethyl Ketone.

2-Butoxyethanol 111-76-2


1 - 10 0.01 - 0.1 20 NIOSH 1403M GC/FID

E $53.00 Also known as Butyl Cellosolve, Ethylene Glycol Monobu-tyl Ether, and Dowanol EB

M-3500 3M POVM 3500


E $53.00 Also known as Butyl Cellosolve, Ethylene Glycol Monobu-tyl Ether, and Dowanol EB

V02-01-15 28 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

2-Butoxyethyl Acetate 112-07-2


1 - 10 0.01 - 0.2 20 OSHA 83 GC/FID

E $53.00 Also known as Butyl Cellosolve Acetate and Ethylene Glycol Monobutyl Ether Acetate

M-3500 3M POVM 3500

Up to 8 hours 0.0243 30 OSHA 83M GC/FID

E $53.00 Also known as Butyl Cellosolve Acetate and Ethylene Glycol Monobutyl Ether Acetate

1-Butoxy-2-Propanol5131-66-8

- See Propylene Glycol n-Butyl Ether

n-Butyl Acetate 123-86-4


1 - 10 0.01 - 0.2 20 NIOSH 1450 GC/FID

A $53.00

T-81 Anasorb 747,

226-81

10 0.03-0.2 1.1 Proprietary, IHGC-P029

GC/FID

A $73.00

M-02 SKC POVM,

575-002

8 hr(Max) TWA 15 min STEL


GC/FID

A $73.00

M-35003M POVM 3500


A $53.00

s-Butyl Acetate 105-46-4


1 - 10 0.01 - 0.2 20 NIOSH 1450 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

t-Butyl Acetate 540-88-5


1 - 10 0.01 - 0.2 20 NIOSH 1450 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

V02-01-15 29 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

n-Butyl Acrylate 141-32-2


1 - 10 0.01 - 0.2 20 NIOSH 1450M GC/FID

A $53.00 Also see Acrylate Monomer Profile.

M-3500 3M POVM 3500


A $53.00

T-73 TBC-Treated

charcoal, 226-73

1 - 12 0.01 - 0.05 20 OSHA CSI GC/FID

A $53.00

M-02 SKC POVM,

575-002

30 min - 8 hours


GC/FID

A $73.00 Recommended passive sampling method.

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00

n-Butyl Alcohol 71-36-3


2 - 10 0.01 - 0.2 20 NIOSH 1401 GC/FID

C $53.00

M-3500 3M POVM 3500


C $53.00

sec-Butyl Alcohol 78-92-2


10 TWA 3 STEL

0.01-0.2 TWA 0.2 STEL


C $53.00

M-3500 3M POVM 3500


C $53.00

t-Butyl Alcohol 75-65-0


10 TWA 3 STEL

0.01-0.2 TWA 0.2 STEL


C $53.00

M-3500 3M POVM 3500


B $53.00

Butyl Carbitol 112-34-5

- $- See Diethylene Glycol Monobutyl Ether.

Butyl Carbitol Acetate 124-17-4

- $- See Diethylene Glycol Monobutyl Ether Acetate

Butyl Cellosolve 111-76-2

- $- See 2-Butoxyethanol.

V02-01-15 30 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Butyl Cellosolve Acetate 112-07-2

- $- See 2-Butoxyethyl Acetate.

n-Butyl Glycidyl Ether 2426-08-6


15 - 30 0.01 - 0.2 20 NIOSH 1616 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

t-Butyl Glycidyl Ether 7665-72-7


15 - 30 0.01 - 0.2 20 NIOSH 1616M GC/FID

A $53.00

tert-Butyl Hydrazine Hy-drochloride, as Particulate 7400-27-3

C-11 PVC, Preweighed, 37mm, 5um, 2PC,

C-11

960 TWA 60 STEL

1-4 50 NIOSH 0500 Gravimetric

$20.00 Not chemical specific.

tert-Butyl Hydroperoxide 75-91-2

T-47-01Silica Gel, 226-47-01

10 TWA 3 STEL

0.05-0.2 TWA 0.2 STEL

2 IN-HOUSE GC/MS

K $152.00

Butyl Isocyanate 111-36-4

K-20 GFF, 2PP-treated,

C-14

15-30 1.0 Max 0.4 OSHA Stopgap

HPLC/UV

O $110.00 Sample open faced. Refrigerate media before and after sampling. Ship cold by overnight delivery. Testing is for both 2,4- and 2,6-TDI isomers. Media has 2-month shelf life (stored cold). OSHA National Emphasis Program spec-ifies field desorption immediately after sampling; the K-20 kit includes C-14 cassette,V-04 vial with 3mL 90/10 (v/v) acetonitrile/dimethyl sulfoxide, tweezers(2), rack, instruc-tion set, SDS for solution. Contact lab for more specifics.

N-Butyl Lactate 138-22-7


10 TWA 3 STEL

0.02-0.2 TWA 0.2 STEL

1 OSHA PV2080 GC/FID

E $73.00

Butyl Mercaptan 109-79-5

C-48 GFF, Hg Acetate- Treated, 37mm, 2PC, SKC PN

225-9007

20 TWA 3 STEL 150 Max

0.2 Max. - NIOSH 2542 GC/FPD

NC $- Protect samples from light. Analysis is subcontracted to an outside laboratory - call for pricing. Stable at least 3 weeks at 25ºC.

V02-01-15 31 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Butyl Methacrylate 97-88-1

T-30-04 XAD-2, 226-30-04

1 - 8 0.05 - 0.1 20 NIOSH 2537M GC/FID

DD $53.00 Also see Acrylate Monomer Profile.

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00

M-02 SKC POVM,

575-002



GC/FID

A $73.00 Recommended passive sampling method.

n-Butyl Phthalate 84-74-2

- $- See Dibutyl Phthalate.

Butylamine, n- 109-73-9

T-30-18 NITC-Treated

XAD-2, 226-30-18

3 - 30 0.01 - 1.0 4 NIOSH 2540M HPLC

N $110.00 Store media cold before sampling. Samples stable at ambient temperature for at least 15 days.

1,3-Butylene Glycol 107-88-0

T-57 GFF/XAD-7 OVS,

226-57

1 - 20 0.01 - 0.10 20 NIOSH 5523 GC/FID

K $73.00 Also see Glycol Profile.

1,4-Butylene Glycol 110-63-4

T-57 GFF/XAD-7 OVS,

226-57

60 - 1000 0.5 - 1.0 80 NIOSH 5523M GC/FID

K $73.00

Butyraldehyde 123-72-8

T-119 DNPH-Treated

Silica Gel, 226-119

2 - 30 0.2 - 1.0 0.8 TO-11 HPLC N $110.00 Refrigerate before and after sampling and ship overnight. Ozone may intefere - use ozone scrubber in known ozone contaminated areas. Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concentrations of acetone or MEK will compete with the al-dehyde and are therefore potential negative interferences. Media contains residual acetonitrile which could interfere with acetonitrile monitoring.

gamma-Butyrolactone 96-48-0

226-01 Charcoal, 226-01

10 Max. 1 Max 20 OSHA Stopgap GC-FID

E $53.00

Cadmium 7440-43-9

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

800 - 1000 1.0 - 3.0 0.5 NIOSH 7300 ICP

T $38.00

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

800 - 1000 1.0 - 3.0 0.025 NIOSH 7300M ICP/MS

T $44.00

V02-01-15 32 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Calcium 7440-70-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

100 - 1000 1.0 - 3.0 2 NIOSH 7300 ICP

T $38.00 Consult TLV booklet for form of analyte.

Camphor 76-22-2


1 - 25 0.01 - 0.2 10 NIOSH 1301 GC/FID

H $53.00

M-3500 3M POVM 3500


H $53.00

Caprolactam - Vapor 105-60-2

T-57 GFF/XAD-7 OVS,

226-57

100 1 max. 10 OSHA PV2012 HPLC

K $110.00 Vapor analysis only.

Caprolactam - Vapor + Particulate 105-60-2

T-57 GFF/XAD-7 OVS,

226-57

100 1 max. 10 OSHA PV2012 HPLC

K $152.00 Filter (particulate) and sorbent beds (vapor) are all tested and reported separately; a cumulative result for all three sections is also reported.

Carbitol (DGMEE) 111-90-0

- $- See Diethylene Glycol Monoethyl Ether

Carbitol Acetate 112-15-2

- $- See Diethlylene Glycol Ethyl Ether Acetate

Carbon Black as Particulate 1333-86-4


C-11

100 - 570 1.0 - 2.0 50 NIOSH 0500 Gravimetric

NC $20.00 Any and all other particulates will be a positive interference with the gravimetric analysis. More specific analysis for Carbon Black by OSHA ID196 is available as a subcon-tracted analysis. Also see the entry for Elemental Carbon.

Carbon Dioxide 124-38-9

Call lab 3.5 - 500 OSHA ID172 GC/TCD

NC $- Analysis is subcontracted.

Carbon Disulfide 75-15-0

T-44 & T-01 in series Drying

Tube, 226-44, pre-ceeding Charcoal,

226-01

25 Max 0.2 Max NIOSH 1600 GC/FPD

NC Call for pricing

Preceed the charcoal tube with a drying tube (PN 226-44). Store and ship cold, with drying tube still attached. Analy-sis is subcontracted.

Carbon Tetrabromide 558-13-4

T-93 XAD-4, 226-93

10 TWA 3 STEL

0.02-0.2 TWA 0.2 STEL

OSHA Stopgap GC/ECD

NC Call for pricing

Important Note: Contact the laboratory before sampling in order to allow time for set up. Subcontracted to outside laboratory.

V02-01-15 33 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Carbon Tetrachloride 56-23-5


3 - 150 0.01 - 0.2 20 NIOSH 1003 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Carbonyl Chloride 75-44-5

- $- See Phosgene

Catechol 575-001

T-95 XAD-7, 226-95

24 Max. 0.1 Max 30 OSHA Stop Gap GC/FID

A $53.00

Cellosolve 110-80-5

- $- See 2-Ethoxyethanol.

Cellosolve Acetate 111-15-9

- $- See 2-Ethoxyethyl Acetate.

Cerium Oxide 1306-38-3

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

960-1920 2-4 2 NIOSH 7300 ICP

T $73.00 Call to schedule analysis to ensure standard is in stock.

Chlordane 57-74-9

T-30-16 GFF/XAD-2 OVS,

226-30-16

10-480 0.5 - 1.0 0.4 OSHA 67 GC/ECD

NC $97.00 Also see Chlorinated Pesticide Profile.

Chlorine 7782-50-5

C-16 Ag/PTFE, Cl2 / Br2 Sampler,

25mm, 3PC, C-16

15 - 90 0.3 - 1.0 2.5 NIOSH 6011 IC

AA $66.00 Membrane has short shelf life. Protect from direct sunlight or prolonged UV (fluorescent) light. Bromine vapor can also be measured on same sampling device. Samples are stable for at least 30 days after sampling.

Chlorine Dioxide 10049-04-4

IMP-04 MFGB, 15 mL

0.02% KI in NaH-CO3/Na2CO3

10 - 120 0.5 10 OSHA ID 202 IC

NC $146.00 Protect solution from light. Collection solution must stay basic; a large concentration of acid gas (such as SO2) may exceed the solution buffering capacity. Avoid this by 1) collecting smaller volume of air in such atmospheres, or 2) check solution pH after sampling and discard is acidic. Midget Fritted Glass Bubbler (MFGB) Impinger solution is available from the laboratory. Advance notice is required due to instability of reagent.

V02-01-15 34 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

5-Chloro-2-Methyl-4-Isothi-azolin-3-One (RH-651) 26172-55-4

K-12 Methanol-moist-

ened cotton-fabric swab

Wipe 100 CM2 area

N/A 1.20 IHHPLC-P007 HPLC/UV

JJ $152.00 Sampling media is methanol moistened cotton-fabric swab and requires immediate methanol extraction. TexWipe®TX306, Fisher Scientific, Cat. # 18-308D cut in 2 in x 2 in squares. Sampling media including methanol, vials, pipette, and sampling instructions are available from laboratory.


50 TWA 7.5 STEL

0.2 TWA 0.5 STEL

0.2 IHHPLC-P008 HPLC/UV

JJ $152.00 Avoid and ensure that the outside of the OVS tube is not contaminated when sampling atmospheres potentially containing Kathon 886 ® Biocide as either a particulate or aerosol. Component of Kathon 886 ® Biocide. Also see 2-Methyl-4 Isothiazolin-3-one.

3-Chloro 2-Methyl-1-Propene 563-47-3

T-81 Anasorb 747,

226-81

48 TWA 3 STEL

0.20 0.07 IN-HOUSE GC/MS

NC $152.00

Chlorobenzene 108-90-7


1.5 - 40 0.01 - 0.2 20 NIOSH 1003 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

p-Chlorobenzotrifluoride 98-56-6


10 Max 0.2 Max 10 OSHA Stopgap GC/FID

A $53.00

M-3520 3M POVM 3520

Up to 8 hours 0.0258 15 OSHA Stopgap GC/FID

A $53.00

Chlorobromomethane 74-97-5


0.5 - 8 0.01 - 0.2 20 NIOSH 1003 GC/FID

A $53.00

Chlorodifluoromethane 75-45-6

M-3520 3M POVM 3520,

2-stage


A $73.00 Note low air volumes.

O-91 Carbosieve

S-III,Orbo 91

0.1 - 1.0 0.01 - 0.05 50 OSHA CSI GC/FID

A $73.00 Note low air volumes.

T-09 (2) Charcoal, 226-09

1 - 4 0.01 - 0.05 50 NIOSH 1018M GC/FID

A $73.00 Sample with two tubes in series (back tube can be smaller 226-01). Note low air volumes.

V02-01-15 35 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

1-Chloro-2, 3-epoxypropane 106-89-8

- $- See Epichlorohydrin

Chloroethane 75-00-3

- $- See Ethyl Chloride

Chloroform 67-66-3


1 - 50 0.01 - 0.2 20 NIOSH 1003 GC/FID

A $53.00

M-3500 3M POVM 3500

Up to 8 hours 0.0335 30 NIOSH 1003MGC/FID

A $53.00

Chloromethane 74-87-3

- $- See Methyl Chloride.

Chloromethyl Benzene 100-44-7

- $- See Benzyl chloride.

Chloromethyl Methyl Ether (CMME) 107-30-2

T-89 TCP-treated

XAD-4, 226-89

20 TWA 4.5 STEL


GC/ECD

NC $146.00 Immediately after sampling heat treat tube(s) at 75°C for 45 minutes. Wrap in aluminum foil to protect from light. BCME can be analyzed on same sample.

o-Chlorophenol 95-57-8


10-40 TWA 3 STEL

0.05-0.2 TWA 0.2 STEL

2.00 NIOSH 2014 HPLC/UV

N $110.00

o-Chloro-P-Nitroaniline 121-87-9

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

480 TWA 60 STEL

1-4 TWA 4 STEL

10 NIOSH 5033 HPLC/UV

NC Call for pricing

This analysis is subcontracted to a referral laboratory. The referral laboratory will analyze for o-chloro-p-nitroaniline on request using the same method as p-nitroanaline.

Chloroprene 126-99-8


1.5 - 8 0.01 - 0.05 20 NIOSH 1002 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

3-Chloropropene 107-05-1

- $- See Allyl Chloride

o-Chlorotoluene 95-49-8


10 Max 0.2 Max 20 NIOSH 1003M GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

V02-01-15 36 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Chlorpyrifos 2921-88-2


226-30-16

480 1.0 - 1.5 0.2 OSHA 62M GC/ECD

NC $97.00

Chromium, Total 7440-47-3

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 2 NIOSH 7300M

ICP

T $38.00 This method measures total chromium - metallic and salts.

Chromium, Low Level, Total 7440-47-3

C-MCE-NN MCE, Low Metals,

37mm, 0.8um, 2PC, C-MCE-NN

50 - 1000 1.0 - 3.0 0.13 NIOSH 7300M ICP/MS

T $44.00

Chromium, Hexavalent Different for each compound


3PC, C-10

30 - 960 2 0.025 OSHA ID 215v2

IC

NC $97.00 Preferred Method. Sample stability varies with exposure source monitored. Identify operation sampled (spray paint, chrome plating, welding, etc.) on Request for Analysis form. Ship overnight within 24 hours of sampling to meet all holding times. CrVI from acidic solutions, such as plating, must be extracted in the lab within 6 days of collection. CrVI from metalworking must be extracted in the lab within 8 days of collection.

Chromium, Hexavalent (Welding and Other Hot Environments) Different for each compound


Quartz support, 2PC, C-53

30 - 960 2 Max 0.025 OSHA ID215v2

IC

NC $97.00 Hot environments sometimes cause the 37mm cassettes to expand resulting in leakage around the PVC filter onto the backup pad. The quartz fiber backup pads in C-53 cassettes are analyzed along with the PVC filters. See hold time description included above.

Chromium, Hexavalent Wipe Different for each compound

C-53 (PVC and/or

quartz filter) PVC, 37mm, 5um,

Quartz support, 2PC, C-53

100 cm2 N/A 0.025 OSHA W4001M

IC

NC $97.00 Cassette holds both PVC and Quartz filters; wipe samples can be collected using either or both filters. Fold exposed side in, and transfer into vial. Identify operation sampled (spray paint, chrome plating, welding, etc.) on Request for Analysis form. Ship overnight within 24 hours of sampling to meet all holding times.

Chromium, Hexavalent Bulk Sample Different for each compound

1 gram Approx. N/A 0.1 ug/g Ap-

prox.

OSHA ID215v2

IC

NC $97.00 Material must be homogenous and finely divided.

Chromic Acid - Soluable Chromates 1333-82-0


3PC, C-10

1000 1.0 - 4.0 0.2 NIOSH 7600 SPEC

NC $66.00 OSHA ID215 is preferred method. Filter must be removed from cassette and placed into a glass vial immediately after sampling. Possible interferences include copper, iron, nickel, and vanadium.

V02-01-15 37 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Chrysene 218-01-9

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


CMME 107-30-2

$- See Chloromethyl Methyl Ether. BCME can be analyzed on same sample.

Coal Tar Pitch Volatiles, measured as Benzene Soluble Fraction (BSF) 65996-93-2


3PC, C-06

960 2.0 60 OSHA 58 Grav/BZ Sol

MM $95.00 Transfer filter into glass vial using tweezers immediate-ly after sampling; wrap vial in foil to protect from light. Additional specific PAH analysis is available as follow-up if needed for samples with BSF exceeding 0.2 mg/M3

Cobalt 7440-48-4

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

400 - 1000 1.0 - 3.0 2 NIOSH 7300M

ICP

T $38.00 May also be tested with tungsten per OSHA Method ID-213.

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

400 - 1000 1.0 - 3.0 0.025 NIOSH 7300M ICP-MS

T $44.00 May also be tested with tungsten per OSHA Method ID-213.

Coke Oven Emissions 67-63-0


3PC, C-06

2.0 30 OSHA 58 Grav/BZ Sol

MM $95.00 Transfer filter into glass vial using tweezers immediate-ly after sampling; wrap vial in foil to protect from light. Additional specific PAH analysis is available as follow-up if needed for samples with BSF exceeding 0.15 mg/M3

Copper 7440-50-8

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

40 - 1000 1.0 - 3.0 1 NIOSH 7300 ICP

T $38.00

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

100 1-3 0.13 NIOSH 7300M ICP-MS

T $44.00 Analysis does not distinguish between dust and fume.

Cotton Dust N/A


C-11

20 - 400 Elutriator 50 NC $20.00

Cresols, Total Isomers, Vapor 1319-77-3

T-95 XAD-7, 226-95

24 0.1 30 OSHA 32 HPLC

K $110.00

Cresols, Vapor and Particulate 1319-77-3

T-57 GFF/XAD-7 OVS,

226-57

48 0.1 30 OSHA 32M HPLC

K $110.00

V02-01-15 38 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Crotonaldehyde 4170-30-3

T-119 DNPH-Treated

Silica Gel, 226-119

7.5 0.5 0.50 EPA TO-11M HPLC/UV

N $110.00 Analysis is for a mix of cis- and trans- isomers. Refrigerate before and after sampling and ship overnight. Ozone may intefere - use ozone scrubber in known ozone contami-nated areas. Any ketone or aldehyde will react with and deplete the DNPH, and is a potential interference. ACGIH states that if instantaneous monitoring is not feasible, ceiling values “can be assessed by sampling over a period that should not exceed 15 minutes, except for those substances that may cause immediate irritation when exposures are short.” Media contains residual acetonitrile which could interfere with acetonitrile monitoring. Also see Aldehyde profile.

Cumene 98-82-8


10 - 30 0.01 - 0.2 20 NIOSH 1501 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 1 Proprietary, IHGC-P029

GC/FID

A $73.00

M-02 SKC POVM,

575-002


0.013 2 Proprietary, IHGC-P029

GC/FID

A $73.00

Cupferron 135-20-6

IMP-11 Impinger, DI Water

100.00 1.0 10 IN-HOUSE HPLC/UV

NC $152.00

Cyanides, Total Various

IMP-12 (order vials separately)

MFGB, 15 mL 0.1N KOH + 0.8um

PVC Prefilter

10 - 180 0.5 - 1.0 2.5 NIOSH 7904 ISE

FF $143.00 Analyze within five (5) days because particulate on filter may liberate HCN gas; impinger samples are stable at least 30 days.

Cyanides, Total Various

T-28 Soda Lime, 226-28

2 - 90 0.2 2.6 (each sec-tion)

NIOSH 6010M

ISE

NC $143.00 Before sampling, remove glass wool plug that preceeds glass fiber filter (stabilizes sampler during shipment). Test-ing the pre-filter for particulate cyanide allows this sampler to provide both gaseous and particulate cyanide results.

Cyanides - Gaseous (HCN) See Hydrogen Cyanide.

- $- See Hydrogen Cyanide.

Cyanides - ParticulateVarious

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

10 - 180 0.5 - 1.0 2.5 NIOSH 7904M

ISE

FF $66.00 Analyze within five (5) days because particulate on filter may liberate HCN gas.

V02-01-15 39 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Cyclohexane 110-82-7


2.5 - 5.0 0.01 - 0.2 20 NIOSH 1500 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL


GC/FID

A $73.00

M02 SKC POVM,

575-002



GC/FID

A $73.00

Cyclohexanol 108-93-0


1 - 10 0.01 - 0.2 20 NIOSH 1402 GC/FID

D $53.00

M-3500 3M POVM 3500


D $53.00

T-81 Anasorb 747,

226-81

10 TWA 0.03-0.2 1.4 Proprietary, IHGC-P029

GC/FID

A $73.00

M-02 SKC POVM,

575-002



GC/FID

A $73.00

Cyclohexanone 108-94-1


1 - 10 0.01 - 0.2 20 NIOSH 1300 GC/FID

A $53.00


226-110

10 0.05 - 0.2 20 OSHA 1 GC/FID

NC $53.00

M-3500 3M POVM 3500


A $53.00

T-81 Anasorb 747, 226-81

10 TWA 3 STEL


GC/FID

A $73.00

M-02 SKC POVM,

575-002



GC/FID

A $73.00

V02-01-15 40 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Cyclohexene 110-83-8 T-01 Charcoal, 226-01

5 - 7 0.01 - 0.2 20 NIOSH 1500 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL


GC/FID

A $73.00

M-02 SKC POVM,

575-002



GC/FID

A $73.00

Cyclohexylamine 108-91-8


XAD-2, 226-30-18

12 Max 0.1 max 8 NIOSH 2540M HPLC


Cyclopentadiene 542-92-7

Call lab Maleic Andydride-Treated Chromo-

sorb 104

3 0.01-0.05 - NIOSH 2523 GC/FID

- $- Sampling tube is treated Chromosorb-104 (special order).

Cyclopentane 287-92-3


5 0.2 20 OSHA CSI GC/FID

A $53.00

DBE (Dupont Dibasic Esters™) N/A

- $- See Dibasic Ester.

DBP 84-74-2

- $- See Dibutyl Phthalate.

DDVP 62-73-7

- $- See Dichlorvos.

Decafluoropentane 138495-42-8

T-09 (2) Charcoal,

226-09

0.5 - 4 0.01 - 0.05 50 NIOSH 1018M GC/FID

I $73.00 Two tubes in series; cap separately after sampling. Sec-ond tube can be smaller 226-01. Store samples refrigerat-ed, ship cold overnight.

Decamethylcyclopentasi-loxane 541-02-6


96 TWA 30 STEL

0.2 TWA 2.0 STEL

10 IHGC-P040 GC/FID

A $73.00 Store samples in freezer, ship cold overnight.

V02-01-15 41 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

n-Decane 124-18-5


1 - 10 0.01 - 0.2 20 NIOSH 1500 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Desflurane57041-67-5

T-81 Anasorb 747,

226-81

3 0.05 10 OSHA 106M GC/FID

CC $66.00

Desmodur W 5124-30-1

- $- See Methylene Bis(4-Cyclohexylisocyanate)

Di(2-Ethylhexyl) Phthalate 117-81-7

T-56 GFF/Tenax OVS,

226-56

240 TWA 15 STEL

1.0 8 OSHA 104M GC/FID

CC $77.00 Synonym: Di-sec-Octyl Phthalate, also DOP

Diacetone Alcohol 123-42-2


1 - 10 0.01 - 0.2 20 NIOSH 1402 GC/FID

D $53.00 Synonym: 4-Hydroxy-4-methyl-2-pentanone

M-3500 3M POVM 3500


D $53.00

Diacetyl 431-03-8

T-183 (2 in Series) Custom Silica Gel,

226-183

TWA-9 Max Stel-3 Max

0.050 Max 0.20 Max

0.2 OSHA 1012 GC/ECD

NC $105.00 Protect from light during sampling and storage (fail-wrapped). Store and ship samples cold. Ship overnight. May be sampled on same tube with acetoin. Filter built into tube faces incoming air stream.

Diatomaceous Earth, Respirable as Particulate 61790-53-2

- $- For speciation as amorphorus silica, see Silica, Amorpho-rus.

Diazinon 333-41-5

T-57 GFF/XAD-7 OVS,

226-57

12 - 240 0.2 - 1.0 0.02 OSHA 62 GC/ECD

S $97.00

Dibasic Ester (DBE) 119-40-0


5 - 10 0.05 - 0.2 50 IHGC-P036 GC/FID

NC $73.00 Made from Dimethyl Adipates, Sebacates, and Glutarates. Ship 5 ml sample of bulk material. DuPont product.

Dibenz(a,h)anthracene 53-70-3

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


DIBK - $- See Diisobutyl Ketone.

V02-01-15 42 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Diborane 19287-45-7

T-151 Oxidizer-Treated

Charcoal, 226-151

60 - 260 0.5 - 1.0 5 NIOSH 6006M

ICP

NC $- Subcontracted to outside laboratory. PTFE prefilter (C-45) required if particulate boron compounds are present. Short shelf life media.

1,2-Dibromoethane 106-93-4

- $- See Ethylene Dibromide.

Di-n-butylamine 111-92-2


XAD-2, 226-30-18

10 0.1 2 OSHA 60M HPLC/UV


Dibutyl Phthalate 84-74-2

T-56 GFF/Tenax OVS,

226-56

240 TWA 15 STEL

1.0 8 OSHA 104 GC/FID

CC $77.00

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

10 - 200 1.0 - 3.0 20 NIOSH 5020 GC/FID

A $53.00

2,2-Dichloro-1,1,1- Trifluoroethane 306-83-2

T-09 (2) Charcoal, 226-09

0.25 - 3.0 0.01 - 0.05 40 NIOSH 2516M GC/FID

I $73.00

4,5-Dichloro-2-N-Octyl-4-Isothiazolin-3-one 64359-81-5


96 TWA 15 STEL

0.2 TWA 1.0 STEL


HPLC/UV

NC $152.00 Ensure outside of the sampler is clean before capping. Also known as DCOIT, and RH-287. Sample may also be tested for 2-n-Octyl-4-Isothiazolin-3-one.

o-Dichlorobenzene 95-50-1


1 - 60 0.01 - 0.2 10 NIOSH 1003 GC/FID

A $53.00 Synonym: 1,2-Dichlorobenzene

M-3500 3M POVM 3500



p-Dichlorobenzene 106-46-7


1 - 10 0.01 - 0.2 10 NIOSH 1003 GC/FID


M-3500 3M POVM 3500



3,4-Dichlorobenzotrifluo-ride 328-84-7


10 TWA 3 STEL

0.02-0.2 TWA 0.2 STEL

4.8 OSHA Stopgap GC/FID

A $73.00

Dichlorodifluoromethane 75-71-8

T-09 (2) Charcoal, 226-09

1 - 4 0.01 - 0.05 50 NIOSH 1018 GC/FID

I $73.00 Two tubes in series. Second tube can be smaller 226-01 tube.

V02-01-15 43 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Dichlorodiphenyltrichlo-roethane (DDT) 50-29-3


3PC, C-06

100 1.5 0.2 NIOSH S274 GC/ECD

S $97.00

1,1-Dichloroethane 75-34-3


0.5 - 15 0.01 - 0.2 20 NIOSH 1003 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

1,2-Dichloroethane 107-06-2

- $- See Ethylene Dichloride.

1,2-Dichloroethene 540-59-0

- $- See 1,2-Dichloroethylene, total.

1,1-Dichloroethene 75-35-4


2.5 - 7.0 0.01 - 0.2 10 NIOSH 1015 GC/FID

A $53.00 Synonym; 1,1-Dichloroethylene

M-3500 3M POVM 3500


A $53.00

M-01 SKC POVM,

575-001


A $53.00

1,2-Dichloroethylene, total (isomer mixture) 540-59-0, mixture of: trans-1,2 156-60-5 cis-1,2 156-59-2


0.2 - 5.0 0.01 - 0.2 10 NIOSH 1003 GC/FID

A $72.00 Includes both -cis and -trans isomers.

M-3500 3M POVM 3500


A $72.00 Also known as 1.2-Dichloroethene. Includes both -cis and -trans.

1,1-Dichloro- 1-fluoroethane 1717-00-6

T-09 (2) Charcoal, 226-09

0.25 - 3.0 0.01 - 0.05 40 NIOSH 2516M GC/FID

NC $73.00 Also known as Refrigerant 141b. Two tubes in series.

O-91 Carbosieve

S-III,Orbo 91

1.0 0.05 Max 40 OSHA 113 GC/FID

A $73.00 Also known as Refrigerant 141b. Two tubes in series.

Dichlorofluoromethane 75-43-4

T-09 (2) Charcoal, 226-09

0.25 - 3.0 0.01 - 0.05 40 NIOSH 2516 GC/FID

A $73.00 Also known as Refrigerant 21. Two tubes in series.

V02-01-15 44 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Dichloromethane 75-09-2

T-01 (2) Charcoal, 226-01

0.5 - 3 0.01 - 0.2 10 NIOSH 1005 GC/FID

A $53.00 Also known as Methylene Chloride. Two tubes in series.


Orbo 91

10 Max 0.01 - 0.1 10 OSHA 80 GC/FID

NC $53.00 Also known as Methylene Chloride. Preferred active sampling method.

M-01 SKC POVM,

575-001

8 hours Max 0.0147 20 OSHA 80M GC/FID

NC $53.00 Also known as Methylene Chloride.

M-3520 3M POVM 3520,

2-stage

Up to 8 hours - 6 Hours Max in High Humidity

(80%)

0.0379 15 NIOSH 1005M GC/FID

A $53.00 Also known as Methylene Chloride.

4,5-Dichloro-2-N-Octyl-4-Isothiazolin-3-one64359-81-5


96 TWA 15 STEL

0.2 TWA 1.0 STEL


K $152.00 Synonyms: Kathon ® 930 Microbiocide, RH-287

Dichloropentafluoropro-pane Ca & Cb

- See Refrigerant 225 and AK225.

Dichloropentafluoropro-pane

- $- See Refrigerant 225 and AK225.

1,2-Dichloropropane 78-87-5

- $- See Propylene dichloride.

1,2-Dichloro- 1,1,2,2-Tetra-fluoroethane76-14-2

T-09 (2) Charcoal, 226-09

1 - 4 0.01 - 0.05 50 NIOSH 1018 GC/FID

I $73.00 Two tubes in series. Second tube can be smaller 226-01 tube. Synonym: R-114

Dichlorvos 62-73-7


226-30-16

120 1.0 0.2 OSHA 62M GC/ECD

NC $97.00

Dicyclopentadiene 77-73-6


10.00 0.1 Max. 5.0 OSHA 07 GC/FID

A $73.00

Diesel Exhaust Particulate (<1 Um In Diameter) 7440-44-0

- $- See Elemental Carbon.

Diesel Fuel 68334-30-5


1 - 20 0.01 - 0.2 50 NIOSH 1550 GC/FID

A $73.00 Submit 5 ml of bulk in separate shipment with sample # reference. Also see Kerosene.

V02-01-15 45 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Diethanolamine 111-42-2


XAD-2, 226-30-18

10 0.1 2 OSHA PV2018M

HPLC

N $110.00 Store media cold before smapling. Sampleas are stable at ambient temperature for at least 15 days.

Diethyl Ether 60-29-7

- $- See Ethyl Ether.

Diethylamine 109-89-7

T-96 NBD-chlo-

ride-treated XAD-7, 226-96

10 0.2 2 OSHA 41 HPLC

W $110.00


XAD-2, 226-30-18

10 0.1 2 NIOSH 2540M HPLC

N $110.00 Store media cold before sampling.

Diethylaminoethanol 100-37-8

T-10-04 Silica Gel, 226-

10-04

24 Max 0.2 Max 1 OSHA Stop-gap (NIOSH

2007M) GC/NPD

NC Call for pricing

Samples subcontracted to outside laboratory. Immediately after sampling, transfer each section of the tube to sepa-rate vials containing 2 mL of 0.2 N HCl in methanol: water (4:1). Obtain prepared vials from lab.

T-98 H3PO4-treated XAD-7, 226-98

20 Max 0.2 Max - OSHA PV2060 GC/FID

NC Call for pricing

Store cold if not shipped immediately. Analysis is subcon-tracted to outside laboratory.

Diethylbenzene 25340-17-4



A $53.00

Diethylene Glycol 111-46-6

T-57 GFF/XAD-7 OVS,

226-57

60 0.5 - 2.0 20 NIOSH 5523 GC/FID

JJ $73.00 Also see Glycol Profile.

Diethylene Glycol Chloroformate 106-75-2

T-153 Amine-treated

XAD-2, 226-153

48 TWA 3 STEL

0.1 TWA 0.2 STEL

5 AIHAJ 12/1986,

pp.742-746 GC/FID


Diethylene Glycol Dibutyl Ether 112-73-2


10 0.01 - 0.05 20 NIOSH 1403M GC/FID

E $53.00 Synonyms: 2-Butoxyethyl ether, also Bis(2-butoxyethyl) ether, also Dibutyldiglycol

Diethylene Glycol Dimethyl Ether 111-96-6


20 0.2 Max 20 NIOSH 1403M GC/FID

E $53.00

V02-01-15 46 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Diethylene Glycol Ethyl Ether Acetate 112-15-2



E $53.00

Diethylene Glycol Monobutyl Ether 112-34-5

M-3500 3M POVM 3500


E $53.00 Synonym: Butyl Carbitol


2 - 10 0.01 - 0.05 20 NIOSH 1403M GC/FID

E $53.00

Diethylene Glycol Monobutyl Ether Acetate 124-17-4



E $53.00

Diethylene Glycol Monoethyl Ether 111-90-0


10 0.01 - 0.05 20 NIOSH 1403M GC/FID

E $53.00

M-3500 3M POVM 3500


E $53.00

Diethylene Glycol Monomethyl Ether 111-77-3



E $53.00

M-3500 3M POVM 3500


E $53.00

Diethylenetriamine 111-40-0


XAD-2, 226-30-18

10 TWA 3 STEL

0.01-0.1 TWA 0.1 STEL

2 OSHA 60 HPLC/UV


Diethylethanolamine 100-37-8

- $- See diethylaminoethanol.

Diglycidyl Ether ofBisphenol A 1675-54-3


3PC, C-06

290 1.6 20 NIOSH P333 HPLC

N $110.00 Store and ship cold after sampling.

Diglyme 111-96-6

- $- See Diethylene Glycol dimethyl Ether.

V02-01-15 47 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Diisobutyl Ketone 108-83-8


1 - 10 0.01 - 0.2 20 NIOSH 1300 GC/FID

A $53.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL

1 Proprietary, IHGC-P029

GC/FID

A $73.00

M-3500 3M POVM 3500


A $53.00

M-02 SKC POVM,

575-002

8 hr TWA (Max) 15 min STEL


GC/FID

A $73.00

Diisobutylene 25167-70-8

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00 Store media cold before sampling. Samples stable at ambient temperature for at least 15 days.

M-02 SKC POVM, 575-002

8 hr TWA (Max) 15 min STEL


GC/FID

A $73.00

Diisopropylamine 108-18-9


XAD-2, 226-30-18

10 0.1 5 OSHA 60M HPLC

N

Dimethoxymethane 109-87-5

- $- See Methylal.

Dimethyl Adipate 627-93-0


10 Max 0.2 20 Proprietary, IHGC-P036

GC/FID

LL $53.00 Refrigerate samples and ship cold overnight. Analyze within 2 weeks of collection.

Dimethyl Ether 115-10-6

- See Methyl Ether

Dimethyl Ethylamine 598-56-1


3 - 30 0.01 - 1.0 1 NIOSH 2007/2010

GC/FID

NC $- Analysis is subcontracted to outside laboratory.

Dimethyl Formamide 68-12-2


10 Max 0.2 Max 1 OSHA 66 GC/NPD

KK $121.00


80 Max 1.0 Max 20 NIOSH 20004 GC/FID

K $53.00

M-3500 3M POVM 3500

Up to 8 hours 0.0355 7.5 OSHA 66M GC/FID

HH $53.00

V02-01-15 48 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Dimethyl Glutarate 1119-40-0



GC/FID


Dimethyl Phthalate 131-11-3

T-56 GFF/Tenax OVS,

226-56

240 TWA 15 STEL


CC $77.00

1,1-Dimethyl propyl methyl ether 994-05-8

- $- See Methyl tert-Amyl Ether.

Dimethyl Succinate 106-65-0



GC/FID


Dimethyl Sulfate 77-78-1

T-115 Porapak-Q, 226-

115

35 Max 0.05 - 0.2 0.2 Proprietary, IHGC-P006

GC/ECD

NC $152.00

Dimethyl Sulfoxide 67-68-5


3-24 TWA 3 STEL

0.05-0.1 TWA 0.2 STEL

3.9 OSHA 07 GC/FID

E $53.00

Dimethylacetamide 127-19-5


15 - 80 0.01 - 1.0 20 NIOSH 2004 GC/FID

K $53.00


10 0.2 5 OSHA 66M GC/FID

I $53.00

M-3500 3M POVM 3500


I $53.00

Dimethylacrylamide (Vapor) 2680-03-7


120 Max 1.0 Max 3.0 Preliminary HSE MDHS

57M HPLC/UV

NC $110.00 Store and ship cold after sampling. Analyze within 2 weeks of collection.

Dimethylamine 124-40-3

T-96 NBD-chlo-

ride-treated XAD-7, 226-96

10 0.2 2 OSHA 34 HPLC UV OR

FL

W $110.00


XAD-2, 226-30-18

20 Max 0.1 Max 4 NIOSH 2540M

HPLC/UV


V02-01-15 49 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Dimethylamine Borane 74-94-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

48-480 TWA 45 STEL

1 TWA 3 STEL

10.9 NIOSH 7300M

ICP

T $38.00 This test is not chemically specific in that all sources of Bo-ron will contribute to the total result. On Analysis Request form specify Boron analysis and request results reported as PPM Dimethylamine Borane To convert Boron results to Dimethylamine Borane in the same units, multiply by 5.45.

N,N-Dimethylamine 75-64-9

- $- See Dimethyl Ethylamine.

2-(Dimethylamino)ethanol 108-01-0

- $- See N,N-Dimethylethanolamine

3-Dimethylamino-1-propyl-amine 109-55-7

T-95XAD-7, 226-95

24 Max 0.05 - 0.10 2 BASF AM-28 GC/FID

K $73.00 Store samples in freezer. Ship cold overnight within 24 hours of sampling.

N,N-Dimethylaniline 121-69-7


3 - 30 0.02 - 1.0 10 NIOSH 2002 GC/FID

M $53.00

2,3 Dimethyl-2,3-Dinitrobutane 3964-18-9

T-35-03Tenax, 226-35-03

2 - 4 0.02 - 0.05 0.4 NIOSH 2507M

GC/ECD

NC $97.00

N,N-Dimethylethanolamine 108-01-0

T-94 XAD-7, 226-94

10-24 TWA 1.5 STEL

0.02-0.1 TWA 0.1 STEL

2 NIOSH 2561M

GC-NPD

NC $121.00 Synonym: N,N-Dimethyl-2-hydroxyethylamine, N,N-Di-methylethanolamine, DMEA, Jeffcat DMEA

Dimethylformamide 68-12-2


15 - 80 0.01 - 1.0 20 NIOSH 2004 GC/FID

K $53.00

M-3500 3M POVM 3500

Up to 8 hours 0.0355 7.5 OSHA 66 GC/NPD

NC $121.00


10 0.2 1 OSHA 66 GC/NPD

NC $121.00

Dimethylisopropylamine 996-35-0

T-94 XAD-7, 226-94

10 - 24 0.02 - 0.1 5 NIOSH 2561M GC/FID

K $121.00 Store and ship samples cold.

Dimethyltin Dichloride 753-71-1


226-30-16

15-75 TWA (Max)

15 STEL

0.25 TWA 1.0 STEL

0.1 NIOSH 5526 GC/FPD

NC Call for pricing

Note: This is a labor-intensive analysis requiring a dedicat-ed instrument and there is a 3 sample minimum. Analysis available for the following agents on one sample: methyltin dichloride, dimethyltin dichloride, and trimethyltin chloride. This analysis is subcontracted to another laboratory.

Di-n-Octyl Phthalate 117-84-0

T-56 GFF/Tenax OVS,

226-56

240 1.0 50 OSHA 104 GC/FID

CC $77.00 Synonym: DNOP

V02-01-15 50 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Di-sec-Octyl Phthalate (DOP) 117-81-7

$- See Di(2-Ethylhexyl) Phthalate.

1,4-Dioxane 123-91-1


0.5 - 15 0.01 - 0.2 10 NIOSH 1602 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

1,3-Dioxolane 646-06-0



A $53.00 Validated only by recovery study.

Dipentene, a mixture of s- and d-limonene isomers 138-86-3

$- See Limonene.

Diphenyl 92-52-4

T-35-01 Tenax, 226-35-01

30 - 300 1.6 5 NIOSH 2530 GC/FID

NC $53.00

Diphenyl Ether 101-84-8

$- See Phenyl Ether.

Diphenyl Ketone Vapor 119-61-9

$- See Benzophenone.

Diphenyl Oxide 101-84-8

$- See Phenyl Ether.

Dipropylene Glycol Methyl Ether 34590-94-8


5 - 10 0.01 - 0.1 20 NIOSH 1403M GC/FID

E $53.00

M-3500 3M POVM 3500


E $53.00

Divinylbenzene 1321-74-0

T-73 TBC-Treated

charcoal, 226-73

12 0.05 7 OSHA 89 GC/FID

NC $53.00 Commercial product routinely contains ethyl vinyl benzene which may also warrant simultaneous monitoring.

DMAPA 109-55-7

$- See 3-Dimethylamine-1-Propylamine.

1-Dodecanethiol 112-55-0

$- See n-Dodecyl mercaptan.

V02-01-15 51 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Dodecyl Acrylate 2156-97-0

$- See lauryl Acrylate.

n-Dodecyl Mercaptan 112-55-0


6 0.4 Max. 0.4 Proprietary, IHGC-P042

GC/MS

K $152.00

tert-Dodecyl Mercaptan 25103-58-6

T-30 XAD-2 Tube,

226-30

6 Ceiling 15 Max.

0.4 Max. 4 Proprietary, IHGC-P043

GC/MS

HH $152.00

Dodecyl Methacrylate 142-90-5

$- See Lauryl Methacrylate, C16-C18

DOP117-81-7

$- See Di(2-Ethylhexyl) Phthalate.

Dowanol DM 111-77-3

$- See 2-(2-Methoxyethoxy) Ethanol

Dowanol DPM 34590-94-8

$- See Dipropylene Glycol Methyl Ether.

Dowanol EB 111-76-2

$- See 2-Butoxy Ethanol.

Dowtherm A 101-84-8 / 92-54-4

$- See Phenyl Ether / Biphenyl Mix.

DPGMEA $- See Dipropylene Glycol Monomethyl Ether Acetate.

Dursban 2921-88-2

$- See Chlorpyrifos.

Dust, Particulates Total N/A

$- See Particulates, Total.

Dust, Particulates Respirable N/A

$- See Particulates, respirable.

EEP Solvent 763-69-9

$- See Ethyl-3-Ethoxy Propionate.

V02-01-15 52 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Elemental Carbon 7440-44-0

C-47 Quartz, heat-treat-ed, 37mm, 3PC, SKC PN 225-401

150 - 5000 2.0 - 4.0 1.3 NIOSH 5040 EGA/TOA

NC Call lab for pricing

For mining applications use the cyclone+diesel particulate matter cassette (jeweled impactor). Suitable cyclones include the 10mm Dorr-Oliver nylon cyclone and SKC GS-1 conductive plastic cyclone, SKC225-105. The SKC cassette has been tested for operation at 1.7 and 2.0 Lpm. For non-mining applications a quartz filter (37 mm) without the impactor may be used. Also, because more than 95% of diesel particulates are less than 1 um in size, a size-selective sampling device (cyclone) is not needed unless there are other interference’s present, such as coal dust. Analysis is subcontracted to outside laboratory.

Epichlorohydrin 106-89-8


10 TWA 3 STEL

0.05-0.2 TWA 0.2 STEL


GC/FID

I $73.00


2 - 30 0.01 - 0.2 10 NIOSH 1010M GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Ethanethiol 75-08-1

$- See Ethyl Mercaptan.

Ethanol 64-17-5

$- See Ethyl Alcohol.

Ethanolamine (Monoethanolamine) 141-43-5


XAD-2, 226-30-18

10 100 cc/min max

2 NIOSH 2540M HPLC


3-Ethenylpyridine N/A

T-93 XAD-4, 226-93

600 1.5 Max 0.2 ASTM D5075 GC-NPD

NC $121.00 Used as indicator for Environmental Tobacco Smoke (ETS). Store frozen, ship cold. May be sampled on same tube with nicotine.

2-(2-ethoxy ethoxy) ethanol. 111-90-0

$- See Diethylene glycol Monoethyl Ether.

2-Ethoxyethanol 110-80-5


10 - 50 0.1 - 0.5 20 OSHA 79 GC/FID

E $53.00

M-3500 3M POVM 3500


E $53.00

V02-01-15 53 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

2-Ethoxyethyl Acetate 111-15-9


10 - 50 0.1 - 0.5 20 OSHA 79 GC/FID

E $53.00

M-3500 3M POVM 3500


E $53.00

Ethyl Acetate 141-78-6

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00

M-3500 3M POVM 3500

Up to 6 hours (at PEL Con-centration)

0.0345 30 NIOSH 1457M GC/FID

A $53.00


1 - 10 0.01 - 0.2 20 NIOSH 1457 GC/FID

A $53.00

M-02 SKC POVM, 575-

002



GC/FID

A $73.00

Ethyl Acrylate 140-88-5

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00 Preferred active sampling method. Also see Acrylate Monomer Profile.

M-02 SKC POVM, 575-

002

8hrs(max) TWA 15min STEL


GC/FID

A $73.00 Preferred passive sampling method. Also see Acrylate Monomer Profile.


3 - 10 0.02 - 0.2 20 NIOSH 1450 GC/FID


M-3500 3M POVM 3500



T-73 TBC-Treated

charcoal, 226-73

3 - 10 0.02 - 0.2 10 OSHA 92 GC/FID

NC $53.00 Also see Acrylate Monomer Profile.

V02-01-15 54 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Ethyl Alcohol 64-17-5


0.1 - 1 0.01 - 0.2 20 NIOSH 1400 GC/FID

B $53.00 Ship cold for overnight delivery. Store in freezer.

T-82 (2) Anasorb 747, 226-82, (2 in

series)

5 - 12 0.01 - 0.05 20 OSHA 100 GC/FID

NC $53.00

M-3520 3M POVM 3520,

2-stage

1 Hour Max (at PEL)

0.0437 30 NIOSH 1400M GC/FID

B $53.00

Ethyl Amyl Ketone 541-85-5


10 - 25 0.01 - 0.2 10 NIOSH 1301M GC/FID

NC $53.00

Ethyl Benzene 100-41-4


10 - 24 0.01 - 0.2 10 NIOSH 1501 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00

M-02 SKC POVM,

575-002

15 - 480 min. 0.013 2 Proprietary, IHGC-P029

GC/FID

A $73.00

Ethyl Bromide 74-96-4


24 TWA 3 STEL

0.05-0.1 TWA 0.2 STEL

3 OSHA 07 GC/FID

NC $53.00

Ethyl Chloride 75-00-3

T-09 (2) Charcoal, 226-09

0.5 - 3 0.02 - 0.05 50 NIOSH 2519 GC/FID

A $73.00

Ethyl Chloroformate 541-41-3

T-153 Amine-treated

XAD-2, 226-153

48 TWA 3 STEL

0.1 TWA 0.2 STEL

5 AIHAJ 12/1986,

pp.742-746 GC/FID


Ethyl Cyanoacrylate 7085-85-0


12 0.01 - 0.2 10 OSHA 55 HPLC

NC $110.00 Store samples in freezer or on ice after sampling. Ship cold (dry ice if possilbe) by overnight delivery.

V02-01-15 55 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Ethyl Ether 60-29-7


0.25 - 3 0.01 - 0.2 20 NIOSH 1610 GC/FID

NC $53.00 Ship refrigerated.

T-81 Anasorb 747,

226-81

0.25 - 3 0.01 - 0.2 20 OSHA Stopgap GC/FID

NC $53.00 Ship refrigerated.

M-3520 3M POVM 3520,

2-stage


A $53.00 Ship refrigerated.

Ethyl-3-Ethoxy Propionate 763-69-9


5 - 10 0.01 - 0.1 20 OSHA PV2025 GC/FID

F $53.00

Ethyl Formate 109-94-4


10 0.2 10 NIOSH 1452 GC/FID

A $53.00

2-Ethyl-1-Hexanol 104-76-7


10 - 60 0.01 - 0.2 20 OSHA CSI GC/FID

I $53.00

Ethyl Lactate 97-64-3

T-81 Anasorb 747,

226-81

6-24 TWA 3 STEL

0.05-0.1 TWA 0.2 STEL

3.4 OSHA 07 GC/FID

E $53.00


10 Max 0.2 Max 20 OSHA PV2081 GC/FID

E $53.00

Ethyl Mercaptan 75-08-1

C-48 GFF, Hg Acetate-Treated, 37mm, 2PC, SKC PN

225-9007

10-150 0.1-0.2 4 NIOSH 2542M HPLC

NC $- Samples are subcontracted to outside laboratory.

Ethyl Styrene 28106-30-1

T-73 TBC-Treated

charcoal, 226-73

12 TWA 3.75 STEL

0.05 TWA 0.25 STEL

6 OSHA 89 GC/FID

CC $53.00

Ethyl-2-Hydroxypropionate 97-64-3

$- See Ethyl lactate.

Ethylamine 75-04-7


XAD-2, 226-30-18

10 Max 0.2 Max 3 OSHA 60M HPLC


V02-01-15 56 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Ethylene Chlorohydrin 107-07-3

T-81A Anasorb 747,

226-81

2 - 35 0.01 - 0.2 20 NIOSH 2513M GC/FID

D $53.00

Ethylene Dibromide 106-93-4


8 - 10 0.02 - 0.2 0.5 NIOSH 1008M

GC/ECD

NC $97.00

Ethylene Dichloride 107-06-2


1 - 50 0.01 - 0.2 10 NIOSH 1003 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00


10 TWA 3 STEL

0.02-0.2 TWA 0.2 STEL

0.14 IHGC-P028 GC/FID

A $73.00

M-01 SKC POVM,

575-001

20 - 480 min 0.01 0.28 IHGC-P029 GC/FID

A $73.00

Ethylene Glycol 107-21-1

T-57 GFF/XAD-7 OVS,

226-57

5 - 60 0.5 - 2.0 20 NIOSH 5523 GC/FID

JJ $73.00 Store samples cold, and ship samples cold overnight.

Ethylene Glycol Monobutyl Ether 111-76-2

$- See 2-Butoxyethanol.

Ethylene Glycol Monobutyl Ether Acetate 112-07-2

$- See 2-Butyoxylethyl Acetate

Ethylene Glycol Monoethyl Ether 110-80-5

$- See 2-Ethoxyethanol.

Ethylene Glycol Monoethyl Ether Acetate 111-15-9

$- See 2-Ethoxyethyl Acetate.

Ethylene Glycol Monomethyl Ether Acetate 110-49-6

$- See 2-Methoxyethyl Acetate

V02-01-15 57 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Ethylene Glycol Monomethyl Ether 109-86-4

$- See 2-Methoxyethanol.

Ethylene Oxide 75-21-8

M-06 SKC Ethylene Ox-ide PM, 575-005

15 min - 8 hours

0.0212 3 OSHA 1010M GC/ECD

NC $97.00 Store sampling media cold. Store collected samples cold if not shippedto the lab immediately after sampling. Ship cold overnight.

T-178 HBR-treated Ana-sorb 747, 226-178

12 TWA 0.75 STEL

0.05 2 OSHA 1010M GC/ECD

NC $97.00 Store sampling media cold. Store collected samples cold if not shippedto the lab immediately after sampling. Ship cold overnight.

Ethylenediamine 107-15-3


XAD-2, 226-30-18

12 TWA 3 STEL

0.025-0.1 TWA 0.2 STEL

3 OSHA 60 HPLC/UV


Ethylene Thiourea 96-45-7

C-56 GFFs(2), 37mm,

4PC, C-56

480 Max. 2 Max. 1 OSHA 95M HPLC/UV

NC $131.00

Ethylhexanoic Acid 149-57-5


24 Max. 0.2 Max. 10.00 OSHA Stopgap GC/FID

N $73.00

2-Ethylhexyl Acrylate 103-11-7

M-02 SKC POVM,

575-002

1.5 hrs (Min)-8 hrs TWA


GC/FID

A $73.00

T-81 Anasorb 747,

226-81

10 TWA 0.03-0.2 TWA 2.8 Proprietary, IHGC-P029

GC/FID

A $73.00

Ethylhexyl Chloroformate 24468-13-1

T-153 Amine-treated

XAD-2, 226-153

48 TWA 3 STEL

0.1 TWA 0.2 STEL

5 AIHAJ 12/1986,

pp.742-746 GC/FID


Ethylvinylbenzene 28106-30-1

$- See Ethyl Styrene.

Fiber Count, Total (“A” counting rules for asbestos fibers) N/A

C-01 MCEF, 25mm,


480 - 1000 0.5 - 16.0 Ap-prox. 3100 F/F

NIOSH 7400, A Rules

PCM

NC $16.00 Sample open faced on black conductive cowled cassette. Primary asbestos fiber counting method. ANALYSIS IS NOT SPECIFIC FOR FIBER TYPE. Follow-up analysis of the same filter by NIOSH Method 7402 (TEM) can be used to provide differentiation of fiber types.

V02-01-15 58 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Fiber Count, Total(“B” counting rules for on- asbestos fibers) N/A

C-01 MCEF, 25mm,


480 - 1000 0.5 - 16.0 Ap-prox. 3100 F/F

NIOSH 7400, B Rules

PCM

NC $16.00 Sample open faced on black conductive cowled cassette. “B” rules are used for counting certain non-asbestos fibers. ANALYSIS IS NOT SPECIFIC FOR FIBER TYPE. Fol-low-up analysis of the same filter by NIOSH Method 7402 (TEM) can be used to provide differentiation of fiber types.

Fibrous Glass (Synthetic Vitreous) N/A

C-01 MCEF, 25mm,


480 0.5 - 16.0 Ap-prox. 3100 F/F

NIOSH 7400, B Rules

PCM

NC $16.00 Sample open faced on black conductive cowled cassette. “B” rules are used for counting certain non-asbestos fibers. ANALYSIS IS NOT SPECIFIC FOR FIBER TYPE. Fol-low-up analysis of the same filter by NIOSH Method 7402 (TEM) can be used to provide differentiation of fiber types.

Fluoranthene 206-44-0

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


Fluorene 86-73-7

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


Fluorides, Gaseous Only 16984-48-8

C-13 MCE/Treated

Backup, 37mm, 3PC, C-13

50 - 800 1.0 - 2.0 5 NIOSH 7902 ISE

NC $66.00 Hydrofluoric Acid is assumed to be the only gaseous fluoride.

Fluorides, Particulate Only 16984-48-8

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 800 1.0 - 2.0 5 NIOSH 7902 ISE

NC $77.00 Cassette C-13 is suitable for both forms of fluorides.

Fluorides, Total 16984-48-8

C-13 MCE/Treated

Backup, 37mm, 3PC, C-13

50 - 800 1.0 - 2.0 10 NIOSH 7902 ISE

NC $143.00 Reporting includes separate results for gaseous fluoride, particulate fluoride, and total fluoride

Forane 26675-46-7

T-81 Anasorb 747,

226-81

20 0.05 20 OSHA 103 GC/FID

A $53.00

M-02 SKC POVM,

575-002


A $53.00

M-3520 3M POVM 3520,

2-stage


A $53.00

V02-01-15 59 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Formaldehyde 50-00-0

T-119 DNPH-Treated

Silica Gel, 226-119

2 - 30 0.03 - 1.0 0.1 NIOSH 2016 HPLC

N $87.00 Preferred active sampling method. Refrigerate before and after sampling and ship overnight. For STEL sampling, collect a 15-minute sample at 1 LPM. Ozone may intefere - use ozone scrubber in known ozone contaminated areas. Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concentrations of acetone or MEK will compete with the aldehyde and are therefore potential negative interferences. Media contains residual acetonitrile which could interfere with acetonitrile monitoring.

Formaldehyde - Short Term 50-00-0

T-54 HMP-treated XAD-

2, 226-54

3 0.2 0.5 OSHA 52 GC/NPD

CC $87.00 For STEL sampling, collect a 15-minute sample at 0.2 LPM. Keep fresh tubes in refrigerated storage. Sample using same lot number for all samples. Field blank sub-mission is very important.

Formaldehyde - Long Term 50-00-0

T-117 HMP-Treated

XAD-2, 226-117

24 0.1 0.5 OSHA 52 GC/NPD

CC $87.00 Keep fresh tubes in refrigerated storage. Sample using same lot number for all samples. Field blank submission is very important.


UMEX-100 SKC UMEX

Aldehyde PM 500-100

Up to 8 hours 0.0286 0.1 NIOSH 2016M HPLC

NC $87.00 Preferred passive sampler for formaldehyde. OSHA reports sampling rate bias when exposure source is methanol-stabilized formalin. Any ketone or aldehyde will react with the DNPH and is a potential interference. May be used for 24-hour IAQ sampling. Large concentrations of acetone or MEK will compete with the aldehyde and are therefore potential negative interferences. Refrigerate before and after sampling and ship overnight. Passive monitor cost is not included in price.

M-ATN571 Assay Aldehyde

PM ATN571

Up to 8 hours 0.01305 0.1 NIOSH 2016M HPLC

NC $87.00

M-3721 3M Formaldehyde

PM 3721

Up to 8 hours 0.0614 2 NIOSH 3500M SPEC

NC $87.00 Not suitable for short-term measurements. Submission of field blank is strongly recommended.


IMP-02 Impinger, 1%

Sodium Bisulfite

1 - 100 0.2 - 1.0 2.5 NIOSH 3500M SPEC

NC $87.00

Formaldehyde in Dust 50-00-0

Call lab IOM sampler

240 - 1050 2.0 4 NIOSH 5700 HPLC/UV

NC $152.00 Transfer IOM cassette to bottle after sampling, store and ship cold.

V02-01-15 60 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Formamide 75-12-7


10 TWA 3 STEL

0.02-0.1 TWA 0.2 STEL

2 OSHA Stopgap GC/NPD

K $121.00


10 TWA 3 STEL

0.02-0.1 TWA 0.2 STEL

5 OSHA Stopgap GC/NPD

K $121.00

Formic Acid 64-18-6


1 - 24 0.05 - 0.2 5 NIOSH 2011 IC

V $66.00 PTFE prefilter (C-29) required in presence of formate salts; discard cassette unless formic acid salts are to be measured. Acetic acid can also be measured on the same sample.


48 Max 0.2 Max 5 OSHA ID186 SGIC

V $66.00 Store cold after sampling. Ship cold overnight. Use pre-filter (C-29) if formate salts are present. Acetic acid can also be measured on the same sample.

Formic Acid Methyl Ester 107-31-3

$- See methyl formate.

Freon N/A

$- See Individual Refrigerants

Fuel Oil See Kerosene.

Furfural 98-01-1

M-3500 3M POVM 3500


I $53.00

T-117 HMP-Treated

XAD-2, 226-117

1 - 12 0.01 - 0.05 50 NIOSH 2529 GC/FID

CC $73.00

Furfuryl Alcohol 98-00-0

T-115 Porapak-Q,

226-115

3 - 25 0.01 - 0.05 40 NIOSH 2505 GC/FID

NC $73.00

Gallium 12024-21-4

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

1920 4.00 2.7 OSHA ID206 ICP

NC $73.00 NIOSH 7300 determines the amount of Gallium metal. Not suitable for analysis of highly-insoluble gallium oxide.

Gasoline 8006-61-9


1 - 20 0.01 - 0.2 75 NIOSH 1550M GC/FID

A $73.00

M-3500 3M POVM 3500


A $73.00

V02-01-15 61 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Glass Fibers/ Syn. Vitreous Fibers N/A

$- See Fiber Count, Synthetic

Glutaraldehyde 111-30-8

T-119 DNPH-Treated

Silica Gel, 226-119

1 - 30 0.05 - 0.5 0.2 NIOSH 2532HPLC/UV

N $110.00 Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concentrations of acetone or MEK will compete with the aldehyde and are therefore potential negative interferences. Refrigerate before and after sampling and ship overnight. The C-20 treated filter sampler should be used if there is aerosol exposure potential.

C-20 GFFs(2),

DNPH-treated, 37mm, 4PC, C-20

30-480 2 0.4 OSHA 64 HPLC/UV

N $110.00 Sample open faced. Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concentrations of ozone, acetone or MEK will compete with the aldehyde and are therefore potential negative interferences. Refrigerate before and after sampling and ship overnight. Minimum media order of 10 units.

Glycidyl Methacrylate 106-91-2


24 TWA 3 STEL

0.05-1 TWA 0.2 STEL

4.3 OSHA 07 GC/FID

A $73.00

Glycolic Acid 79-14-1

C-44 GFF Type A/B,

37mm, 1um, 3PC, C-44

300 Max. 0.2 - 2.0 20.0 Proprietary, IHIC-P001 IC/Cond.

NC $82.00 Synonym: Hydroxyacetic Acid

GMAA79-41-4

$- See Methacrylic Acid

Goal® Herbicide 42874-03-3


3PC, C-10

96 TWA 30 STEL

0.2 TWA 2.0 STEL

2 IN-HOUSE HPLC/UV

N $138.00

Gold 7740-57-5

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

200-400 1 - 2 2.0 NIOSH 7300M ICP

NC

Graphite 7782-42-5


3PC, C-10

100 - 500 1.0 - 3.0 100 OSHA ID 142 XRD

W $121.00 Quartz is a direct interference.

Graphite - Bulk 7782-42-5

2 - 5 grams 1% OSHA ID 142 XRD

$121.00

V02-01-15 62 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Halothane 151-67-7

T-81 Anasorb 747,

226-81

12 Max 0.05 Max 75 OSHA 103 GC/FID

A $53.00

M-3520 3M POVM 3520,

2-stage


A $53.00

HCFC 225 135151-96-1

$- See Refrigerant 225 ca & cb. Also known as AK 225 ™ and dichloropentafluropropane.

HCFC-123 306-83-2

$- See 2,2-Dichloro-1,1.1-Trifluoroethane

HDI 822-06-0

$- See Hexamethylene Diisocyanate

HDI Homopolymer 28182-81-2

$- See Hexamethylene Diisocyanate Homopolymer

Heptachlor 76-44-8


226-30-16

60 1.0 1 OSHA CSI GC/ECD

NC $97.00 Also see Chlorinated Pesticide Profile.

Heptane 142-82-5


4 - 10 0.01 - 0.2 10 NIOSH 1500 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

2-Heptanone 110-43-0

$- See Methyl n-amyl Ketone

Heptyl Acetate 90438-79-2


5 - 10 0.05 - 0.2 5 NIOSH 1450M GC/FID

A $53.00 Component of DuPont products Axarel TM and Optisol In-Line.

Heptyl Alcohol 70914-20-4


5 - 10 0.05 - 0.2 5 NIOSH 1402 GC/FID

A $53.00 Component of Optisol TM - a DuPont product

Heptyl Alcohol + Isomers 70914-20-4


5 - 10 0.05 - 0.2 5 NIOSH 1402M GC/FID

D $53.00 Component of Optisol TM - a DuPont product

Hexachlorocyclopentadi-ene 77-47-4

T-116, 2 tubes in series

Porapak-T, 226-116

6-90 TWA 6 STEL

0.01-0.2 TWA 0.2 STEL

0.03 NIOSH 2518 GC/ECD

NC $97.00 Cap tubes separately after sampling. Store refrigerated in dark.

V02-01-15 63 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

1,1,1,3,3,3- Hexachloropropane 3607-78-1

T-59-04 Porapak R, 226-59-04

1 - 10 0.01 - 0.2 0.1 NIOSH 2517 GC/ECD

NC $97.00

Hexamethylcyclotrisilox-ane 541-5-9


96 TWA 30 STEL

0.2 TWA 2.0 STEL

16 IHGC-P040 GC/FID


1,6-Hexamethylene Diisocyanate 822-06-0

K-20 GFF, 2PP-treated, 37mm, 3PC, C-14

15 - 240 1.0 0.12 OSHA 42 HPLC/FL


Hexamethylene Diisocyanate Homopolymer 28182-81-2


15 - 240 1 Max 2 OSHA PV2125

HPLC/UV


Hexamethylenediamine 124-09-4


XAD-2, 226-30-18

12 0.1 2 OSHA Stopgap HPLC


n-Hexane 110-54-3


4 - 10 0.01 - 0.2 10 NIOSH 1500 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Hexane, isomers, other than n-Hexane75-83-2; 79-29-8; 96-14-0; 107-83-5


4 - 10 0.01 - 0.2 10 NIOSH 1500 GC/FID

A $73.00

M-3500 3M POVM 3500


A $73.00

2-Hexanone 591-78-6

$- See Methyl butyl Ketone

Hexone 108-10-1

$- See Methyl Isobutyl ketone (MIBK)

V02-01-15 64 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Hexylene Glycol 107-41-5


3 - 20 0.05 - 0.2 20 OSHA Stopgap GC/FID

E $53.00

HFE 7100 $- See Perfluorobutyl Methyl Ether

High Flash Aromatic Naphtha N/A

$- See Aromatic 100

HMDI 5124-30-1

$- See Methylene Bis(4-Cyclohexylisocyanate).

Hydrazine 302-01-2

C-15 GFFs (2),


240 1.0 0.1 OSHA 108 HPLC

NC $110.00 Preferred method.

T-42-02 H2SO4-treated

Firebrick, 226-42-02

10 - 20 0.1 - 1.0 0.08 OSHA 20 HPLC

NC $110.00

Hydrobromic Acid 10035-10-6

$- See Hydrogen Bromide

Hydrocarbons, Total as n-Hexane N/A


20 - 50 0.01 - 0.2 50 NIOSH 1500 GC/FID

A $73.00 Commonly used to measure Volatile Organic Compounds (VOCs); instrument response to hexane is used for a cumulative estimation of all compounds that 1) collect on charcoal, 2) desorb in CS2, and 3) respond to FID under the chromatographic conditions applied. Light hydrocar-bons may break through with high (>10L) air volumes.

M-3500 3M POVM 3500

Up to 8 hours 0.032 (published

rate for hexane)

75 NIOSH 1500M GC/FID

A $73.00 Commonly used to measure Volatile Organic Compounds (VOCs); instrument response to hexane is used for a cumulative estimation of all compounds that 1) collect on charcoal, 2) desorb in CS2, and 3) respond to FID under the chromatographic conditions applied. Light hydrocar-bons may break through with high (>10L) air volumes. Light hydrocarbons may require sampling with 3M 3520.

M-01 SKC POVM, 575-

001

Up to 8 hours 0.0143 (published

rate for hexane)


A $73.00 Commonly used to measure Volatile Organic Compounds (VOCs); instrument response to hexane is used for a cumulative estimation of all compounds that 1) collect on charcoal, 2) desorb in CS2, and 3) respond to FID under the chromatographic conditions applied. Light hydrocar-bons may require sampling with 3M 3520.

V02-01-15 65 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Hydrocarbons, Total as n-Hexane, High Resolution N/A

T-01Charcoal, 226-01

5 - 20 0.01 - 0.2 20 NIOSH 1500 GC/FID

A $121.00 Commonly used to measure Volatile Organic Compounds (VOCs); instrument response to hexane is used for a cumulative estimation of all compounds that 1) collect on charcoal, 2) desorb in CS2, and 3) respond to FID under the chromatographic conditions applied. The five most abundant compounds will be identified as TICs (Tentatively Identified Compounds, based upon GC-MS library search) in samples that meet or exceed the FID LOQ.

M-3500 3M POVM 3500

Up to 8 hours 0.032 (pub-lished rate for

hexane)



M-01 SKC POVM,

575-001

Up to 8 hours 0.0143 (pub-lished rate for

hexane)



Hydrochloric Acid 7647-01-0

$- See Hydrogen Chloride. Also see Acid Mist Profile.

Hydrogen Bromide 10035-10-6


3 - 100 0.2 - 0.5 5 NIOSH 7903 IC

U $66.00 See Hydrogen Bromide. Also see Acid Mist Profile.

Hydrogen Chloride 7647-01-0


3 - 100 0.2 - 0.5 2.5 NIOSH 7903 IC

U $66.00 Also see Acid Mist Profile. Synonyms: Hydrochloric acid, muriatic acid

Hydrogen Cyanide 74-90-8

T-28 Soda Lime, 226-28

2 - 90 0.2 2.6 NIOSH 6010M

ISE

NC $77.00 Before sampling, remove glass wool plug that preceeds glass fiber filters (holds filter in place at front of sorbent during shipping).

Hydrogen Fluoride 7664-39-3


3 - 100 0.3 Max 10 NIOSH 7903 IC

U $66.00 See also Fluorides, Gaseous for alternate filter/cassette sampling method. Also see Acid Mist Profile.

V02-01-15 66 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Hydrogen Peroxide 7722-84-1

IMP-13 Midget Fritted Glass Bubbler, 15 mL TiOSO4

reagent

100 0.5 2 (varies

with solu-tion vol-

ume)

OSHA VI-6 Color

NC $95.00 Request 20 mL sampling solution and one V-40 vial per sample and blank from laboratory. Must send blank solu-tion for correction. Positive interferences can be expected from any compounds that liberate H2O2 on acid hydroly-sis. Negative interferences are a function of the reactivity of H2O2 with other compounds present in the air samples. Dangerous goods shipping requirement. Sampling solution shelf-life is 1 month.

Hydrogen Sulfide 7783-06-4

T-177 Silvered Silica Gel,

226-177

12 TWA 7.5 STEL

0.05 Max 0.5 Max

9 OSHA 1008 IC

NC $110.00 Preferred method. Store media and samples cold, ship overnight.

K-04 Low SO4 Charcoal

(Lrg. Orbo 34) + PTFE prefilter to remove sulfate particulates (if

present).

2 - 40 (established at 10 ppm, see

notes at right)

0.1 - 1.5 5 NIOSH 6013 IC

NC $66.00 Do not send filter to lab unless measurement of particu-late sulfates/sulfides is required. Breakthrough volume sampling in a low humidity 1 ppm atmosphere is 420 liters; capacity increases in high humidity atmosphere.

Hydrogenated Terphenyl 61788-32-7

C-08 PTFE, 37mm,

2um, 3PC, C-08

30 Max 3 Max 100 OSHA Stopgap GC/FID

NC $73.00 Immediately after sampling, transfer filter and backup pad into small glass vial for shipping.

Hydroquinone 123-31-9

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

30 - 180 1.0 - 4.0 2 NIOSH 5004 HPLC

NC $110.00 Place filter in glass vial containing 10 ml of 1% acetic acid immediately after sampling.

Hydroquinone (Vapor) 123-31-9


20 Max 0.2 Max 2 OSHA Stopgap HPLC

NC $110.00

Hydroxy Ethyl Acrylate 818-61-1


7.5 STEL 30 TWA

0.5 STEL 0.25-0.5 TWA

6 IN-HOUSE GC/FID

KK $73.00 Store in freezer after sampling. Ship cold overnight.

Hydroxy Ethyl Methacrylate 868-77-9


7.5 STEL 30 TWA

0.5 STEL 0.25-0.5 TWA

7 IN-HOUSE GC/FID


2-Hydroxypropyl Acrylate, Mixture of Isomers 25584-83-2


30 TWA 7.5 STEL

0.05-0.5 TWA 0.5 STEL

6.2 IN-HOUSE GC/FID


2-Hydroxypropyl Methacrylate 27813-02-1


30 TWA 7.5 STEL

0.05-0.5 TWA 0.5 STEL

6 IN-HOUSE GC/FID


V02-01-15 67 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Indeno(1,2,3-cd)pyrene 193-39-5

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


Indium Oxide 1312-43-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

2000 Max. 4 2.4 NIOSH 7300M

ICP

T $73.00 NIOSH 7300 determines the amount of Indium metal. Mul-tiply Indium amount by 1.21 to obtain results expressed as Indium Oxide.

Iodine (NO iodide com-pounds present) 7553-56-2

T-80 KOH-treated Ana-sorb 747, 226-80

2.5 - 7.5 (Ceil-ing)

0.5 OSHA ID212 IC

NC Call for pricing

If relative humidity is >50% sample using alternate imping-er method to avoid iodine loss. See next entry if particulate iodide compounds are present. Ship immediately via over-night carier. Efficient collection of 0.7 ppm atmosphere at 0.5 LPM for up to 30 minutes was demonstrated. Analysis is subcontracted to outside laboratory.

Iodine (iodide compounds present) 7553-56-2

T-142 PTFE/KOH-treated Anasorb 747 OVS,

226-142

2.5 - 7.5 (Ceil-ing)

0.5 OSHA ID212 IC

NC Call for pricing

If relative humidity is >50% sample using alternate im-pinger method to avoid iodine loss. This sampler includes a prefilter to remove interfering iodide compounds. Ship immediately via overnight carier. Efficient collection of 0.7 ppm atmosphere at 0.5 LPM for up to 30 minutes was demonstrated. Analysis is subcontracted to outside laboratory.

IPDI 4098-71-9

$- See entry for Isophorone Diisocyanate.

Iron Oxide 1309-37-1

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

200 - 2000 1.0 - 4.0 2 NIOSH 7300 ICP

T $38.00 Reported as Iron. Limit air volume sampled as necessary to prevent overloading filter.

Isoamyl Acetate 123-92-2


1 -10 0.01 - 0.2 20 NIOSH 1450 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Isoamyl Alcohol 123-51-3


1 -10 0.01 - 0.2 20 NIOSH 1402 GC/FID

D $53.00

M-3500 3M POVM 3500


D $53.00

Isobornyl Methacrylate 7534-94-3


3 0.01-0.3 80 IHGC-P018 GC/FID

A $73.00

V02-01-15 68 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Isobutyl Acetate 110-19-0


1 - 10 0.01 - 0.2 20 NIOSH 1450 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00

M-02 SKC POVM,

575-002



GC/FID

A $73.00

Isobutyl Acrylate 106-63-8

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00

M-02 SKC POVM,

575-002

8 hrs (Max) TWA

15 min STEL


GC/FID

A $73.00

IsobutylAlcohol 78-83-1


1 - 10 0.01 - 0.2 10 NIOSH 1401 GC/FID

C $53.00

M-3500 3M POVM 3500

Up to 8 hours 0.0359 15 NIOSH 1401M GC/

FID

C $53.00

Isobutyryl Chloride 79-30-1

T-153 Amine-treated

XAD-2, 226-153

48 TWA 3 STEL

0.1 TWA 0.2 STEL

5 AIHAJ 12/1986,

pp.742-746 GC/FID


Isobutyl Isobutyrate 97-85-8


10 0.2 5 OSHA PV2090 GC/FID

F $53.00

M-3500 3M POVM 3500

Up to 8 hours 0.0255 7.5 OSHA PV2090M GC/FID

A $53.00

V02-01-15 69 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Isobutyl Methacrylate 97-86-9

M-02 SKC POVM,

575-002

8 hrs (Max) TWA

15 min STEL


GC/FID

A $73.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03 - 0.2 TWA

0.2 STEL


GC/FID

A $73.00

Isobutyraldehyde 78-84-2

T-119 DNPH-Treated

Silica Gel, 226-119

3-24 TWA 3 STEL

0.05-0.5 TWA 0.2 STEL

1 MOSH 2532M HPLC/UV

N $110.00 Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concentrations of the ace-tone or MEK will compete with aldehyde and are therefore potential negative interferences. Refrigerate media before and after sampling and ship overnight. Also see Aldehyde Profile for additional compounds.

Isoflurane 26675-46-7

$- See Forane.

Isooctane 540-84-1


1 - 10 0.01 - 0.2 10 NIOSH 1500 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Isopentyl Acetate 123-92-2

$- See Isoamyl Acetate

Isophorone 78-59-1

226-81A Anasorb 747,

226-81

2 - 25 1 Max. 50 NIOSH 2508M GC/FID

NC $53.00

M-3500 3M POVM 3500


A $53.00

Isophorone Diisocyanate 4098-71-9


15 - 240 1.0 0.2 OSHA 42 HPLC/FL

O $110.00 Ship samples refrigerated by overnight delivery. Sample open-faced. Media has short shelf life - refrigerate unused media. Any compound that reacts to form a derivative with the 1-2-PP reagent or competes with it in its reaction to derivatize the isocyanate may be an interference. Some known interferences are anhydrides, amines, alcohols, and carboxylic acids.

Isophthalic Acid as Particulate 121-91-5


C-11

100-480 1-4 50 NIOSH 0500 Gravimetric

NC $20.00 Not chemical specific.

V02-01-15 70 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Isoprene 78-79-5

T-73 TBC-Treated

charcoal, 226-73

3 TWA 0.75 STEL


NC $53.00 Store in freezer after sampling. Ship cold overnight.

Isopropanol 67-63-0

$- See Isopropyl Alcohol

Isopropyl Acetate 108-21-4


1 - 10 0.01 - 0.2 20 NIOSH 1454 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Isopropyl Alcohol 67-63-0


0.2 - 3 0.01 - 0.2 5 NIOSH 1400 GC/FID

A or B

$53.00

M-3520 3M POVM 3520,

2-stage


A or B

$53.00

Isopropyl Benzene 98-82-8

$- See Cumene

Isopropylamine 75-31-0


XAD-2, 226-30-18

20 TWA 1.5 STEL

0.1 TWA 0.1 STEL

4 OSHA Stopgap

HPLC/UV

NC $110.00 Store media cold before sampling. Samples stable at ambient temperature for at least 15 days.

Isopropyl Chloroformate 108-23-6

T-153 Amine-treated

XAD-2, 226-153

48 TWA 3 STEL

0.1 TWA 0.2 STEL

5 AIHAJ 12/1986,

pp.742-746 GC/FID


Isovaleraldehyde 590-86-3

T-119 DNPH-Treated

Silica Gel, 226-119

2 - 30 0.2 - 1.0 1.0 TO-11 HPLC

N $110.00 Also see Aldehyde Profile. Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concentrations of acetone or MEK will compete with the al-dehyde and are therefore potential negative interferences. Refrigerate before and after sampling and ship overnight.

Kathon ® 886 Biocide MixtureN/A


50 TWA 7.5 STEL

0.2 TWA 0.5 STEL

See indi-

vidual com-

pound entries

IHHPLC-P008 HPLC/UV

JJ See individual compound

entries

This product contains 2-Methyl-4-Isothiazolin-3-One (RH 573) and 5-Chloro-2-Methyl-4-Isothiazolin-3-One (RH 651). Avoid and ensure that the outside of the OVS tube is not contaminated when sampling atmospheres potentially containing this material as either a particulate or aerosol.

V02-01-15 71 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Kathon ® 893 Biocide 26530-20-1


96 TWA 15 STEL

0.2 TWA 1.0 STEL

0.6 IN-HOUSE IHHPLC-P002

HPLC/UV

K $152.00 Avoid and ensure that the outside of the OVS tube is not contaminated when sampling atmospheres potentially containing RH-287 as a particulate. This product contains 2-N-Octyl-4-Isothiazolin-3-one

Kathon ® 930 Microbiocide 64359-81-5


96 TWA 15 STEL

0.2 TWA 1.0 STEL


K $152.00 This product contains 4,5-Dichloro-2-N-Octyl-4-Isothi-azolin-3-one; also known as RH-287.

Kerosene (Diesel fuel) 8008-20-6


1 - 20 0.01 - 0.2 50 NIOSH 1550 GC/FID

A $73.00 Submit 5 ml of bulk in separate shipment for reference. Can also be used to measure jet fuels in air (JP-4 or JP-8).

Lauryl Acrylate 2156-97-0

T-81 Anasorb 747,

226-81

10 TWA 0.03-0.2 TWA 3.4 IN-HOUSE GC/FID

A $73.00

Lead 7439-92-1

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

400 - 2000 1.0 - 3.0 2 NIOSH 7300 ICP

T $38.00

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

400 - 2000 1.0 - 3.0 0.062 NIOSH 7300M ICP/MS

T $44.00

Lead - Paint chips 7439-92-1

1 - 2 gm N/A 0.005% NIOSH 7082M

FLAA/ICP

T $27.00

Lead - Soil or Water 7439-29-1

$- See Environmental Directory of Services for detailed information.

Lead - Wipes/Dust 7439-92-1

K-07 Ghost Wipe Kit

100 sq. cm. or 1 sq. ft.

2 NIOSH 7082 ICP-OES

T $27.00 Place folded wipe in special shipping/digestion container supplied by the laboratory as Wipe Test Kit (K-07).

Ligroin 8032-32-4

$- See Naphtha or Petroleum Distillates

Lime 1305-78-8


C-11

480.00 1-4 50 NIOSH 0500 Gravimetric

$20.00 Not chemically specific.

Limonene 138-86-3


10 - 25 0.02 -0.05 20 NIOSH 1552 GC/FID

A $53.00

Lithium 7439-93-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 2000 1.0 - 3.0 2 NIOSH 7300 ICP

T $38.00

V02-01-15 72 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Lithium Hydride 7580-67-8

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

160 - 2000 1.0 - 3.0 2 NIOSH 7300M

ICP

T $38.00 Total lithium reported as LiH.

Magnesium - Fume 1309-48-4

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1200 1.0 - 3.0 2 NIOSH 7300 ICP

T $38.00 Magnesium oxide fume as magnesium.

MAK 110-43-0

$- See Methyl n-Amyl Ketone

Maleic Acid 110-16-7


3PC, C-06

100-480 TWA 30 STEL

1-4 2 NIOSH P&CAM 302

HPLC/UV

NC $110.00

Maleic Anhydride 108-31-6

T-30-07 XAD-2, 226-30-07

20 0.1 2 OSHA 25 HPLC

NC $110.00 Tubes have short shelf-life; store cold. Include 226-30 tube (T-30) in train between 226-30-07 tube and pump. Discard 226-30 tube after sampling. Wrap tubes with foil to protect from light during sampling and shipping. Ship samples refrigerated by overnight delivery. Any compound that will react with p-anisidine and has the same retention time will interfere in the spectral region of interest.

C-28 GFFs (2),


140 0.5 2 OSHA 86 HPLC/UV

K $110.00 Sample closed-face. If maleic anhydride exists in the air as particulates, sample using coated filters per method OSHA 86. This method may also be used just for vapors. Media has 1 month shelf life; Store in a refrigerator and ship as soon as possible after sampling.

Manganese 7439-96-5

C-05MCEF, 37mm,

0.8um, 3PC, C-05

100 - 1000 1.0 - 3.0 0 NIOSH 7300M ICP-MS

T $44.00

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

100 - 1000 1.0 - 3.0 2 NIOSH 7300M

ICP-OES

T $38.00

MBK 591-78-6

$- See Methyl butyl Ketone

4,4’-MDI 101-68-8

$- See Methylene Bisphenyl Diisocyanate.

MEK 78-93-3

$- See Methyl Ethyl Ketone.

MEK Peroxide 1338-23-4

T-93 XAD-4, 226-93

15 1 10 OSHA 77 HPLC/UV

NC $- Call lab prior to sampling. Freeze samples immediately after sampling. Ship samples cold by overnight delivery. Samples referred to outside laboratory for analysis.

V02-01-15 73 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Menthol 2216-51-5


10 - 20 0.1 5 SPM GC/FID

NC $53.00

Mercaptopropyltrimethox-ysilane, Gamma 4420-74-0

O-202580 Specially Cleaned XAD-2, O-202580

30 0.05-0.07 10 IHGC-P032 GC/FID

K $73.00 Ship sample by overnight delivery to the lab in insulated container with cold pack. Synonym: Silane A-189.

Mercury 7439-97-6

T-17-1A Anasorb C300,

226-17-1A

20 - 100 0.15 - 0.25 0.025 NIOSH 6009 CVAA

NC $73.00 Sample with pre-filter (C-05) in the presence particulates containing mercury, or particulates containing Cr +6 or large amounts of Ni +2. The pre-filter may be tested for mercury particulates if needed.

M-03 SKC Mercury PM, SKC PN 520-02A

8 hours max 0.020 0.1 OSHA ID140M CVAA

NC $73.00 PN 520-02A is the consumable sorbent capsule only; passive monitor holders (SKC 520-03) are required, and are available for $40 each.

Mercury Particulate 7439-97-6

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

100 - 1000 1.0 - 3.0 0.05 OSHA ID 145 CVAA

NC $73.00

Mercury Wipes Various K-07 Ghost Wipe Kit

100 cm2 0.075 EPA SW846 7471A CVAA

NC $73.00

Mesityl Oxide 141-79-7


1 - 25 0.01 - 0.2 20 NIOSH 1301 GC/FID

H $53.00

M-3500 3M POVM 3500


H $53.00

Mesitylene 108-67-8

$- See 1,3,5-Trimethylbenzene

Metalworking Fluids N/A

C-09 PTFE, Pre-


500 - 1000 2 50 NIOSH 5524 Gravimetric

with Extraction

NC $93.00 Laboratory pre-washed and pre-weighed teflon filters are required; a special 3-piece cassette is required for thoracic-range cyclone. Store samples cold if not shipped immediately, analyze within 2 weeks of collection. Appli-cable to mineral oils, semi-synthetics, and synthetic fluids. Send small bulk sample (1 - 5 mL) of fluid for solubility evaluation. Ship cold for overnight delivery.

Methacrylamide 79-39-0

IMP-14 MFGB, 20 mL DI

Water

150 0.8 2 IHHPLC-P004 HPLC/UV

NC $152.00

V02-01-15 74 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Methacrylic Acid 79-41-4

T-49-108 Chromosorb 108,

226-49-108

5 TWA 1.5 STEL

0.03-0.3 TWA 0.1 STEL


HPLC/UV

NC $152.00 Acrylic acid can be collected and analyzed along with methacrylic acid by this method.

T-30-08(2) Anasorb 708, 226-30-08, 2 in series

24 0.10 4.0 OSHA PV2005

HPLC/UV

K $152.00 Two identical tubes sampled in series. Acrylic acid may also be tested along with methacrylic acid.

Methacroyl Chloride 920-46-7

T-153 Amine-treated

XAD-2, 226-153

48 TWA 3 STEL

0.1 TWA 0.2 STEL

5 AIHAJ 12/1986,

pp.742-746 GC/FID


Methanol 67-56-1

$- See Methyl Alcohol

1-Methoxy-2-Propanol 107-98-2

$- See Propylene Glycol Methyl Ether

1-Methoxy-2-Propanol Acetate 108-65-6

$- See Propylene Glycol Methyl Ether Acetate

2-Methoxyethanol 109-86-4


15 0.01 - 0.1 20 OSHA 79 GC/FID

E $53.00

M-3500 3M POVM 3500


E $53.00

2-(2-Methoxyethoxy) ethanol 111-77-3

$- See Diethylene Glycol Monomethyl Ether.

2-Methoxyethyl Acetate 110-49-6


10 - 50 0.01 - 0.2 20 OSHA 79 GC/FID

E $53.00 Synonyms: Methyl Cellosolve Acetate, Ethylene Glycol Monomethyl Ether Acetate.

M-3500 3M POVM 3500


E $53.00 Synonyms: Methyl Cellosolve Acetate, Ethylene Glycol Monomethyl Ether Acetate.

2-Methoxyethyl Ether 111-96-6

$- See Diethylene Glycol Dimethyl Ether

2-Methoxy-1-Methylethyl Acetate 108-65-8

See Propylene Glycol Methyl Ether Acetate

Methyl 2 Cyanoacrylate 137-05-3


12 0.01 - 0.2 10 OSHA 55 HPLC

NC $110.00

V02-01-15 75 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Methyl Acetate 79-20-9


2 - 10 0.01 - 0.2 20 NIOSH 1450M GC/FID

A $53.00

M-3520 3M POVM 3520,

2-stage

2 hours max 0.0370 30 NIOSH 1450M GC/FID

A $53.00

Methyl Acrylate 96-33-3


5 Max 0.01 - 0.2 20 NIOSH 1459M GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00

M-02 SKC POVM, 575-

002



GC/FID

A $73.00

T-73 TBC-Treated char-

coal, 226-73

12 max 0.05 Max 20 OSHA 92 GC/FID

A $53.00

Methyl Alcohol 67-56-1


10 Max 0.02 - 0.2 20 NIOSH 2000 GC/FID

NC $53.00 Reduce air volume when sampled in high humidity condi-tions. Store samples in refrigeration. Ship samples cold for overnight delivery.

T-82 (2) Anasorb 747, 226-82, (2 in

series)

3.0 TWA 0.75 STEL

0.05 Max 0.05

20 OSHA 91 GC/FID

NC $53.00

Methyl Amyl Alcohol 108-11-2

$- See Methyl Isobutyl Carbinol

Methyl t-Amyl Ether 994-05-8

$- See t-Amyl Methyl Ether

Methyl n-Amyl Ketone 110-43-0


1 - 25 0.05 - 0.2 20 NIOSH 1301 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

V02-01-15 76 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Methyl Bromide 74-83-9

T-83 (2) Anasorb 747,

226-83

3 Max 0.05-0.2 10 PV2040 GC/FID

A $66.00 Two 226-83 tubes in series. Cap separately after sampling and refrigerate immediately. Ship in an insulated container with synthetic ice product and analyzed within two weeks of sampling.

Methyl t-Butyl Ether 1634-04-4

T-09 (2) Charcoal, 226-09,

2 in Series

2 - 96 0.1 - 0.2 20 NIOSH 1615 GC/FID

A $53.00 Sample with two tubes in series. Cap separately after sampling. Smaller 226-01 tube can be used as second tube in train.

M-3500 3M POVM 3500


A $53.00

Methyl Butyl Ketone 591-78-6


5 - 10 0.2 20 NIOSH 1300 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Methyl Carbitol 11-77-3

$- See Diethylene Glycol Monomethyl Ether.

Methyl Cellosolve 109-86-4

$- See 2-Methoxyethanol

Methyl Cellosolve Acetate 110-49-6

$- See 2-Methoxyethyl Acetate

Methyl Chloride 74-87-3

T-09 (2 in series) Charcoal, 226-09,

2 in Series

3 TWA 1.5 STEL

0.02-0.1 TWA 0.1 STEL


I $53.00 Ship samples by overnight delivery to the lab in insulated container with cold pack. Using 226-01 for second tube in series is acceptable.

Methyl Chloroform 71-55-6


1 - 10 0.01 - 0.2 10 NIOSH 1003 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Methyl Chloroformate 79-22-1

T-153 Amine-treated

XAD-2, 226-153

48 TWA 3 STEL

0.1 TWA 0.2 STEL

5 AIHAJ 12/1986,

pp.742-746 GC/FID


Methyl Cyclohexane 108-87-2


4 - 10 0.01 - 0.2 20 NIOSH 1500 GC/FID

A $53.00

V02-01-15 77 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Methyl Ether 115-10-6


3 Max 0.01 - 0.2 20 NIOSH 1610M GC/FID

A $53.00 Stable in freezer for 14 days. Synonym: Dimethyl Ether

M-3520 3M POVM 3520

2 Max 0.033 30 NIOSH 1610M GC/FID

A $53.00

Methyl Ethyl Ketone 78-93-3

T-10 (2) Silica Gel, 226-10, 2 tubes in series

3 - 10 0.1 20 OSHA 16 GC/FID

NC $53.00 Sample with 2 tubes in series, cap separately after sampling.


2 - 12 0.01 - 0.2 5 NIOSH S3 GC/FID

A $53.00 Ship refrigerated by overnight delivery.

T-81 Anasorb 747,

226-81

2 - 12 0.01 - 0.2 5 NIOSH 2500 GC/FID

A $53.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00

M-3500 3M POVM 3500

Up to 8 hours 0.0363 7.5 OSHA 07M GC/FID

A $53.00 Keep samples cold and expedite analysis for optimum results.

M-02 SKC POVM,

575-002

15 - 480 min 0.02 2 Proprietary, IHGC-P029

GC/FID

A $73.00

T-121 Anasorb CMS,

226-121

10 Max -0.19 NIOSH 2555 GC/FID

A $53.00

Methyl Ethyl Ketone Peroxide 1338-23-4

$- See MEK Peroxide

Methyl Ethyl Ketoxime 96-29-7


24 TWA 7.5 STEL

0.05-0.2 TWA 0.5 STEL

5 IN-HOUSE GC/FID

K $73.00 Refrigerate as soon as possible after collection. Ship cold by overnight carrier.

Methyl Formate 107-31-3

T-83 Anasorb 747,

226-83

3 Max 0.05 Max 5 PV2041 GC/FID

NC $53.00

Methyl Hydrazine 60-34-4

C-15 GFFs (2),


240 1.0 0.5 OSHA 108M HPLC

NC $110.00

V02-01-15 78 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Methyl Isoamyl Ketone 110-12-3


1 - 10 0.01 - 0.2 20 NIOSH 1300M GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Methyl Isobutyl Carbinol 108-11-2


5 - 10 0.05 - 0.2 20 NIOSH 1402 GC/FID

NC $53.00 Store in freezer after sampling, ship overnight. Synonym: Methyl Amyl Alcohol

M-3500 3M POVM 3500


NC $53.00 Store in freezer after sampling, ship overnight. Synonym: Methyl Amyl Alcohol

Methyl Isobutyl Ketone (MIBK) 108-10-1


1 - 10 0.01 - 0.2 5 NIOSH 1300 GC/FID

A $53.00 Synonyms: Hexone, 4-Methyl-2-pentanone; Isobutyl methyl ketone; MIBK. Store samples cold and ship cold overnight.

M-3500 3M POVM 3500



T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID


M-02 SKC POVM,

575-002


GC/FID



Orbo 91

10 Max. 0.01 - 0.2 10 NIOSH 2555 GC/FID


2-Methyl-4-Isothiazolin-3-One (RH 573) 2682-20-4


50 TWA 7.5 STEL

0.2 TWA 0.5 STEL


JJ $152.00 This chemical is one component of Kathon ® 886 Biocide. Also known as RH 573.

Methyl Mercaptan 74-93-1

C-48 GFF, Hg Acetate- Treated, 37mm, 2PC, SKC PN

225-9007

10-150 0.1-0.2 4 NIOSH 2542 GC/FPD

NC Call for pricing

Protect samples from light after sampling. Analysis is subcontracted to outside laboratory.

Methyl Mercaptopropionate 2935-90-2

T-47-01 Silica Gel, 226-47-01

6 max TWA 3 STEL

0.05 - 0.2 TWA 0.2 STEL


K $73.00

V02-01-15 79 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Methyl Methacrylate 80-62-6

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00

T-30-06 XAD-2, 226-30-06

1 - 8 0.01 - 0.05 20 NIOSH 2537 GC/FID

DD $53.00 Store in freezer and ship overnight on dry ice.

T-73 TBC-Treated

charcoal, 226-73

3 Max 0.01 - 0.05 20 OSHA 94 GC/FID

CC $53.00

M-02 SKC POVM,

575-002

8hr (Max) TWA 15min STEL


GC/FID

A $73.00 Preferred passive sampling method.

M-3500 3M POVM 3500


A $53.00

Methyl Methanoate 107-31-3

$- See Methyl Formate

Methyl Propyl Ketone 107-87-9


1 - 10 0.01 - 0.2 5 NIOSH 1300 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

n-Methyl Pyrrolidone (NMP) 872-50-4


30 - 125 0.05 -0.2 20 NIOSH 1302 GC/FID

E $53.00 Protect from prolonged light exposure. Refrigerate sam-ples and ship cold overnight.

M-3500 3M POVM 3500


E $53.00

Methyl Styrene (alpha) 98-83-9


3 - 30 0.2 20 NIOSH 1501M GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Methyl Styrene, meta and para 25013-15-4

$- See Vinyl Toluene

V02-01-15 80 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

2-Methyl-1,3- Butadiene 78-79-5

$- See Isoprene

4-Methyl-2-Pentanone 108-10-1

$- See Methyl Isobutyl ketone (MIBK)

2-Methyl-4-Isothiazolin-3-One 2682-20-4

$- See Kathon 886 Biocide

Methylal 109-87-5


1 - 3 0.01 - 0.2 20 NIOSH 1611 GC/FID

S $53.00 Also known as Dimethoxymethane

M-3520 3M POVM 3520,

2-stage

1 Hour 0.0379 30 NIOSH 1611M GC/FID

A $53.00

Methylamine 74-89-5


XAD-2, 226-30-18

1-20 0.01-0.1 4 NIOSH 2540M HPLC

N $110.00 Preferred method. Store media cold before sampling. Samples stable ambient temperature for at least 15 days.

T-96 NBD-chlo-ride-treated

XAD-7, 226-96

10 TWA 3 STEL

0.01-0.2 TWA 0.2 STEL

3 OSHA 40 HPLC

W $110.00

2-Methylbutyl Acetate 624-41-9


10 TWA 3 STEL

0.01-0.2 TWA 0.2 STEL


A $53.00

1-Methylbutyl Acetate 626-38-0

$- See sec-Amyl Acetate.

4,4’ Methylene bis (2-Chloroaniline) 101-14-4

$- See MOCA

Methylene Bisphenyl Diisocyanate101-68-8 (4,4’-MDI) 5873-54-1 (2,4’-MDI)

K-20 OSHA Isocya-

nate Kit for Field Desorption (see description at

right).

15 - 240 1.0 0.12 OSHA 47 HPLC/FL

O $110.00 Sample open faced. Store unused media cold. Specify whether testing is for 4,4’-MDI or 2,4’-MDI (2,2’-MDI, CAS 2536-05-20, is not currently available)]. Media has 2-month shelf life (stored cold). OSHA National Empha-sis Program specifies field desorption immediately after sampling; the K-20 kit includes C-14 cassette,V-04 vial with 3mL 90/10 (v/v) acetonitrile/dimethyl sulfoxide, twee-zers(2), rack, instruction set, SDS for solution. Contact lab for more specifics.

V02-01-15 81 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Methylene Bisphenyl Diisocyanate, Polymeric (PMDI), Air Sample 9016-87-9 and others

K-20 OSHA Isocya-


right).

15 - 240 1.0 Vari-able

OSHA 47 Mod.

HPLC/FL

O $110.00 Sample open faced. Characterization of a bulk sample of undiluted MDI/PMDI product is required to establish an instrument calibration. See next entry below for cost of bulk sample characterization. Contact lab for specific instructions.

Methylene Bisphenyl Diisocyanate, Polymeric (PMDI), Bulk Sample Characterization 9016-87-9 and others

Vial 1-5 mL of un-diluted MDI/PMDI product

Vari-able

OSHA 47 Mod.

HPLC/FL

O $150.00 Bulk sample of undiluted MDI/PMDI product is required. Contact lab for specific instructions.

Methylene Chloride 75-09-2

$- See dichloromethane.

4,4-Methylene Dianiline 101-77-9

K-13 C-15 (H2SO4

Treated GFF) plus 2 vials with 2 ml DI water for field

transfer.

1000 Max 1.0 - 2.0 0.1 NIOSH 5029M

HPLC/UV

NC $97.00 Within 4 hours after sampling, transfer each filter to a separate glass vial containing 2 ml deionized water.

Methylenebis(4-Cyclohex-ylisocyanate) 5124-30-1

K-20 OSHA Isocya-


right).

15 - 60 1.0 0.40 OSHA PV2092 HPLC

O $110.00 Sample open faced. Store unused media cold. Media has 2-month shelf life (stored cold). OSHA National Empha-sis Program specifies field desorption immediately after sampling; the K-20 kit includes C-14 cassette,V-04 vial with 3mL 90/10 (v/v) acetonitrile/dimethyl sulfoxide, twee-zers(2), rack, instruction set, SDS for solution. Contact lab for more specifics.

n-(1-Methylethyl)-2-Propanamine 108-18-9

$- See Diisopropylamine.

Methylolacrylamide 924-42-5


96 TWA 15 STEL

0.2 TWA 1 STEL


NC $152.00 Acrylamide may also be tested along with n-methylolacryl-amide. Synonym: N-(Hydroxymethyl)acrylamide.

2-Methyl-2, 4-Pentanediol 107-41-5

$- See Hexylene Glycol.

V02-01-15 82 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Methyltin Trichloride 993-16-8


226-30-16

15-75 TWA (Max)

15 STEL

0.25 TWA 1.0 STEL


NC Call for pricing.

Note: This is a labor-intensive analysis requiring a ded-icated instrument; 3-sample minimum applies. Analysis is also available for the following agents on one sample: dimethyltin dichloride and trimethyltin chloride. This test is subcontracted to an outside laboratory.

MIAK 110-12-3

$- See methyl Isoamyl Ketone

Mineral Oil as particulate 8052-41-3

$- See Oil Mist

Mineral Spirits 8052-41-3, 68551-17-7, 64741-65-7, others


20 0.01 - 0.2 50 OSHA 48 GC/FID

A $73.00

M-3500 3M POVM 3500


A $73.00

MOCA 101-14-4

K-13 C-15 (H2SO4

Treated GFF) plus 2 vials with 2 ml DI water for field

transfer.

100 Max. 1.0 Max. 0.1 OSHA 71M (sampling)

NIOSH P&CAM 236M

(analysis) HPLC/UV

NC $110.00 Transfer each filter (using tweezers) to a separate glass vial containing 2 mL DI water within 10 hours of sampling. Extracted samples are stable at room temperature for at least 2 weeks.

Mold Spore Count & ID (Non-Viable) N/A

C-23 Air-O-Cell

Cassette, C-23

150 15 Standard Microscopy

NA

NC Call for pricing

See Indoor Air Quality Profiles. Rush Turnaround requires notification.

Mold Spore ID (Non-Viable) Bulk N/A

1X1 inch NA Pres-ence/Ab-

sence

Standard Microscopy

NA

NC Call for pricing

See Indoor Air Quality Profiles. Rush Turnaround requires notification.

Molybdenum, Total 7439-98-7

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 2 NIOSH 7300 ICP-OES

T $38.00

Monochloroacetic Acid 79-11-8

T-47-01 Silica Gel, 226-47-01

10 - 100 0.05 - 0.2 1 NIOSH 2008 IC

V $66.00 Store samples cold and in the dark. Synonym: Chloroace-tic Acid.

Monochlorobenzene 108-90-7

$- See Chlorobenzene.

V02-01-15 83 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Morpholine 110-91-8


XAD-2, 226-30-18

20 Max 0.1 Max 1 NIOSH 2540M HPLC

N $110.00 Preferred Method. Store media cold before sampling. Samples stable at ambient temperature for at least 15 days.


10 Max. 0.1 Max. OSHA PV2133 GC/FID

NC Call for pricing

Store and ship cold after sampling. Testing is subcontract-ed to an outside laboratory.

MPK 107-87-9

$- See Methyl Propyl Ketone.

MTBE 1634-04-4

$53.00 See Methyl t-Butyl Ether.

Naphtha, Petroleum (MW = 97.8-110) 8030-30-6


1 - 20 0.01 - 0.2 50 NIOSH 1550 GC/FID

A $73.00 Ship 5 ml pure distillate in separate shipment for refer-ence.

M-3500 3M POVM 3500



Naphtha, VM & P (MW = 118-130) 8032-32-4


1 - 20 0.01 - 0.2 50 NIOSH 1550 GC/FID


M-3500 3M POVM 3500



Naphthalene 91-20-3


226-110

10 Max TWA 3 Max STEL

0.2 Max 5 OSHA 35 GC/FID

A $53.00



A $53.00

M-3500 3M POVM 3500


A $53.00

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC

NC $110.00 See methods listed above for monitoring naphthalene alone; this entry describes monitoring for a PAH Profile. Wrap cassettes with foil if sampling in bright sunlight. Transfer filter to glass vial immediately after sampling, and wrap tube and vial with aluminum foil to protect from light. Store samples cold and ship samples cold for overnight delivery.

V02-01-15 84 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Nickel 7440-02-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

400 - 1000 1.0 - 3.0 2 NIOSH 7300 ICP-OES

T $38.00

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

400 - 1000 1.0 - 3.0 0.063 NIOSH 7300 ICP-MS

T $44.00

Nickel Carbonyl (as Ni) 13463-39-3

O-304 Low-Nickel char-coal, ORBO 304,

Supelco PN 20041

10 - 80 0.05 - 0.2 0.03 NIOSH 6007M ICP/MS

NC $73.00 MCEF prefilter (C-05) is required when nickel particulates are present. Do not return filter after sampling.

Nicotine 54-11-5

T-93 XAD-4, 226-93

0.5 - 600 0.1 - 1 1 NIOSH 2551 GC/NPD

NC $121.00 Preferred method. Store cold and ship cold overnight, protect from light. Stable for 2 weeks at 5oC.

T-30-04 XAD-2, 226-30-04

60 - 400 1.0 1 NIOSH 2544 GC/NPD

NC $121.00 Stable at ambient temperature at least 5 days.

T-93 XAD-4, 226-93

1-24 hours (duration limit-ed by sorbent

capacity of approx. 300 ug

nicotine)

1.5 Max 0.2 ASTM D5075 GC/NPD

NC $121.00 Store samples in freezer, ship cold overnight. Stable for 8 weeks at -10ºC. Testing for 3-ethenylpyridine also available.

Nitrates, Particulate N/A

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

3 - 100 0.5 - 1.5 5 NIOSH 7903M IC

U $66.00

Nitric Acid 7697-37-2


3 - 100 0.2 - 0.5 5 NIOSH 7903 IC

U $66.00 Also see Acid Mist Profile.

Nitric Oxide (NO) 10102-44-0

T-40 TEA-treated

Molecular Seive, 226-40

1.5 - 6 0.025 1.3 NIOSH 6014 Spec

NC $66.00 3rd tube in train of three (TEA tube for NO2, followed by oxidizer tube, followed by TEA tube for NO). Discard oxidizer tube after sampling. NO is tested only from the third tube in train. Store tubes cold. Samples are stable at ambient temperature for at least 7 days. Inorganic nitrites cause positive interference.

p-Nitroaniline 100-01-6

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

480 TWA 60 STEL

1-4 TWA 4 STEL

10 NIOSH 5033 HPLC/UV

NC $110.00 Note: This method is applicable to p-nitroaniline aerosol but not for environments where vapor may be present.

Nitrobenzene 98-95-3


10 - 150 0.01 - 1.0 5 NIOSH 2005 GC/FID

K $53.00

V02-01-15 85 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Nitroethane 79-24-3

T-30-06 (2) XAD-2, 226-30-06

3 0.01-0.05 40 NIOSH 2526 GC/FID

NC $53.00 Two 226-30-06 tubes in series.

Nitrogen Dioxide 10102-44-0

T-40-02 TEA-treated

Molecular Seive, 226-40-02

1.5 - 6 (see notes at right regard-ing improved sensitivity)

0.025 - 0.2 2 NIOSH 6014 Spec

NC $66.00 The NO2 TLV has been lowered since publication of NIOSH Method 6014, which describes validation per-formed in NIOSH 2nd Edition Method S320. This validation demonstrated efficient collection at a rate of 0.064 L/min for 180 minutes (11.5 L) in at atmosphere of 11.6 ppm NO2/84% RH. Two tubes may be sampled in series for indication of breakthrough. Store tubes cold before sampling. Samples are stable at ambient temperature for at least 7 days.No oxidizer tube needed.

Nitrogen Dioxide/Nitric Oxide (NO2 / NO) N/A

T-40 TEA-treated

Molecular Seive, 226-40

1.5 - 6 0.025 NO 1.3 NO2 2.0

NIOSH 6014 Spec

NC $146.00 Three tubes in train are required (TEA tube for NO2, followed by oxidizer tube, followed by TEA tube for NO). Discard oxidizer tube after sampling. Since NO requires oxidation before trapping, the notes above regarding improved test sensitivity for NO2 do not apply. Store tubes cold before sampling. Samples are stable at ambient temperature for at least 7 days. Inorganic nitrites cause positive interference.

Nitromethane 75-52-5


226-110

2.4 0.02 2 NIOSH 2527 GC/NPD

NC Call for pricing

Rear sorbent section must be transferred to a vial imme-diately after sampling. Samples are subcontracted to an outside laboratory.

2-Nitropropane 79-46-9


226-110

3 0.01-0.05 1.4 NIOSH 2528 GC/FID

NC $53.00

1-Nitropyrene 5522-43-0


3PC, C-06

960 2 Max 1 OSHA 58M HPLC

MM $110.00

Nonyl Acetate 143-13-5

IMP-07 MFGB, Methanol

10 0.05 - 0.1 300 NIOSH 1450MGC/FID

A $53.00 Part of Optisol Rotary. DuPont product.

Nonylphenol 84852-15-3

T-95 XAD-7, 226-95

24 Max 0.1 Max 100.00 OSHA PV2085M HPLC/UV

K $152.00 Mixed isomer CAS #25154-52-3.

Nuisance Particulates, Respirable N/A

$- See Particulates, Respirable.

Nuisance Particulates, Total N/A


V02-01-15 86 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Octamethylcyclotetrasi-loxane 556-67-2


96 TWA 30 STEL

0.2 TWA 2.0 STEL

16 IHGC-P040 GC/FID


n-Octane 111-65-9


3 - 10 0.01 - 0.2 20 NIOSH 1500 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

n-Octylamine 111-86-4

T-93 XAD-4, 226-93

96 TWA 9 STEL

0.2 TWA 0.6 STEL

40 IHGC-P023 GC/FID

K $73.00 Store samples in chemical refrigerator if not immediately shipped for analysis.


XAD-2, 226-30-18

10 0.1 Max. 0.4 NIOSH 2540M HPLC

NC $110.00 Store media cold before sampling. Samples stable at ambient temperature for at least 15 days.

t-Octylamine 107-45-9

T-93 XAD-4, 226-93

96 TWA 9 STEL

0.2 TWA 0.6 STEL

86 IHGC-P023 GC/FID


2-N-Octyl-4-Isothiazolin-3-One26530-20-1


96 TWA 15 STEL

0.2 TWA 1.0 STEL


K $152.00 Note: STEL samples may have to be repeated several times in succession with the SAME tube in order to achieve adequate sensitivety. Store samples in chemical refrigerator if not immediately shipped for analysis. Syn-onym: Kathon ® 893 Biocide, RH 287.

Oil Mist, Custom 8012-95-1


C-11

100 - 500 1.0 - 3.0 50 NIOSH 5026 FTIR

NC $121.00 Unweighed media may be used if total particulate resuls are not required (C-05 or C-10). Ship a 5 ml bulk sample of undiluted oil (not emulsion) separately for standardiza-tion. Oil must be freon 113 soluble.

Oil Mist, Mineral 8012-95-1


C-11

100 - 500 1.0 - 3.0 50 NIOSH 5026 FTIR

NC $73.00 Unweighed media (C-05 or C-10) may be used if total particulate results are not required. Commercial white mineral oil will be used as reference.

Oil Mist, as Particulate 8012-95-1


C-11

50 -1000 1.0 - 3.0 50 NIOSH 0500 Gravimetric

NC $20.00 Other non-oil particulates will positively interfere.

Optisol Inline 70914-20-4

$- See Heptyl Alcohol and Heptyl Acetate entries.

Optisol Rotary 143-13-5

$- See Nonyl Acetate and Benzyl Alcohol entries.

V02-01-15 87 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Oxalic Acid as Particulate 144-62-7


C-11

480-960 TWA 60 STEL



Oxone™, measured as Sulfate Ion 10361-76-9

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

30 - 480 0.5 - 2.0 5 OSHA ID 113 IC

U $75.00 Oxone is Dupont’s trade name for the potassium salt of peroxymonosulfuric acid. This procedure uses a modifi-cation of OSHA Method 113 (Sulfuric Acid sampling/anal-ysis) for filter sampling of oxone, followed by reduction to sulfate and analysis by Ion Chromatography/Conductivity Detection. The sulfate measurement is mathematically converted to an Oxone equivalent.

10,10-Oxybisphenoxarsine 58-36-6

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

480 TWA 60 STEL

1-4 TWA 4 STEL

0.05 as Ar-senic

NIOSH 7901 GFAA

NC $49.00 On Analysis Request form specify “Arsenic-GFAA” analy-sis (GFAA stands for Graphite Furnace Atomic Absorption and provides a lower limit of quantitation than standard ICP analysis) and request results reported as micrograms and mg/M3 Oxybisphenoxyarsine, 10, 10’-. (To convert Ar-senic results to Oxybisphenoxyarsine, 10, 10’- (C24H16A-s2O3; molecular weight 502.2) in the same units, multiply by 3.35). Note: This test is not chemically specific in that all sources of Arsenic will contribute to the total result.

Ozone 10028-15-6

C-22 GFFs (2),

nitrite-treated, 37mm, 2PC, C-22

TWA 90 22.5 STEL

0.25 - 0.5 TWA 1.5 STEL

6.25 OSHA ID 214 IC

NC $66.00 Media has very short shelf life (<5 weeks). Minimum order of 10 units. Sulfur dioxide gas and airborne particulate ni-trate salts are positive interferences. Oxidizer tube in front of filter can eliminate SO2 if known to be present. Field blank is imperative (two treated filters per cassette).

PAH Profile N/A

$- See Polynuclear Aromatic Hydrocarbons

PAH Profile - Selected Analytes N/A

$- See Polynuclear Aromatic Hydrocarbons - Selected Analytes.

Paraffin Wax Fumes 8002-74-2


3PC, C-06

200 - 600 1.0 100 OSHA PV2047 GC/FID

NC $73.00

Particle Characterization/ ID N/A

1 - 10 grams NA NA EPA/600/M4-82-620, Dec.

1982 PLM

NC $97.00 Morphological examination by PLM. Also see indoor air quality profiles. Sample types include mini-vac samples, scrapings, bulk materials in sealed bags, tape lifts, or MCEF filters.

Particle Sizing, Bulks N/A

$- Optical microscopy. Please see Section V.5 for details on multiple size ranges & pricing.

V02-01-15 88 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Particulate Matter, <10 microns N/A

X-13 Hi-Vol GFF, Pre-weighed, 8”x10”,

1um

1585 cubic meter

28 1 mg 40CFR Pt 50 App B

Gravimetric

NC $36.00 Size-selective sampler is required, sampling at the man-ufacturer’s specified flow rate. This listing is for a 1 CFM PM10 high volume sampler.

Particulate Matter, <10 microns N/A

C-40 PEM Sam-pler PTFE,

Preweighed, 2um(Anaslide), Serialized, C-40

2000 (see notes at

right)

Specific to impactor

used

50 EPA 1P-10A Gravimetric

NC $36.00 This listing is for the SKC PEM PM10 series of impactors, available for various sampling rates. Air volume of 2000 liters provides testing sensitivity down to 0.050 mg/M3.

Particulate Matter, Total Suspended (High Vol Sampler)N/A

X-13 Hi-Vol GFF, Preweighed, 8”x10”, 1um

1585 cubic meter

28 1 mg 40CFR Pt 50 App B

Gravimetric

NC $36.00 Requires high volume sampler at 28 LPM. Filter can also be analyzed for Lead (Pb) particulates.

Particulates, Not Other-wise ClassifiedN/A


Particulate Size Estimate (Bulk, Surface or Air) 2 Ranges

10 grams <2.5 mm, ≥2.5

mm or <10 mm, ≥10 mm

Call for pricing.

This test is subcontracted to an outside laboratory.

Particulate Size Estimate (Bulk, Surface or Air) 3 Ranges

10 grams <2.5 mm, ≥2.5 mm but <10 mm, ≥10 mm

Call for pricing.

This test is subcontracted to an outside laboratory.

Particulates, Respirable N/A

C-11 or C-12 PVC, Preweighed, 5um, C-11 or C-12

170 - 1000 See comments

50 NIOSH 0600 Gravimetric

$20.00 Sampling rate and cassette type vary with cyclone type. SKC Aluminum Cyclone, 2.5 LPM, C-12 (3-piece cassette). Nylon Dorr-Oliver Cyclone, 1.7 LPM, C-11 (2-piece cassette). Synonyms: Respirable Particulates Not Otherwise Regulated, Nusiance Respirable Dust.

V02-01-15 89 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Particulates, Total N/A


C-11


$20.00 Three (3) piece pre-weighed PVC cassette (C-12) is also suitable. Synonyms: Particulates Not Otherwise Regulated (PNOR), Nusiance Dust.

Particulates, Total N/A

C-04 MCEF, 37mm, 0.8um, 3PC,

Matched-weight, C-04


$20.00 Matched weight MCE filter; does not require pre-weighing. Filter can also be analyzed for metals. Synonyms: Particu-lates Not Otherwise Regulated (PNOR), Nusiance Dust.

Particulates, PM10 N/A

See Particulate matter <10 microns

PCB - Caulk/Oil/Water/Soil See Environmental Directory of Services.

PCB - Vapor & Particulate N/A

$- See Polychlorinated Biphenyls - Vapor & Particulate

PCB - Wipe N/A

X-PCB Paper filter, 7cm,

hexane-moistened

100 cm2 2 ug/wipe

SW-846 8082 GC/ECD

S $97.00 Also See Environmental Directory of Services.

Pentachlorophenol 87-86-5

T-57 GFF/XAD-7 OVS,

226-57

50 - 100 0.2 - 0.5 2 OSHA 39M HPLC

K $110.00

n-Pentane 109-66-0


2 0.05 - 0.1 10 NIOSH 1500 GC/FID

A $53.00

M-3520 3M POVM 3520,

2-stage

Up to 4 hours 15 NIOSH 1500M GC/FID

A $53.00

2,4-Pentanedione123-54-6

$- See Acetylacetone

1-Pentanol 71-41-0

$- See Amyl Alcohol.

2-Pentanone 107-87-9

$- See Methyl Propyl Ketone.

1-Pentyl Acetate 628-63-7

$- See n-Amyl Acetate.

2-Pentyl Acetate 626-38-0

$- See sec-Amyl Acetate.

V02-01-15 90 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Perchloroethylene 127-18-4

$- See Tetrachloroethylene.

Perfluoro Pentane 138495-42-8

$- See Decafluoropentane.

Perfluorobutyl Methyl Ether Isomer mixture (163702-07-6 & 163702-08-7)


Orbo 91

1 Max 0.05 Max 50 OSHA Stopgap GC/FID

F $53.00 Store and ship samples cold, analyze ASAP. Synonym: HFE-7100.

Petroleum Distillates Customer-provided bulk as reference standard General Term


1 - 20 0.01 - 0.2 50 NIOSH 1550 GC/FID

A $73.00 Send 5 ml pure distillate separately for standardization. If no pure distillate bulk is available, see “Petroleum Distil-lates, Best-Fit” below.

Petroleum Distillates, Best-Fit [No pure distillate bulk available as reference standard] General Term


1 - 20 0.01 - 0.2 50 NIOSH 1550 GC/FID

A $121.00 Sample chromatographic peak pattern is compared to in-house multi-component hydrocarbon mixtures (Stoddard Solvent, VM&P Naphtha, Mineral Spirits, etc.) to identify best available reference standard. If no match is found, results are reported as Total Hydrocarbons as Hexane.

Petroleum Ether 8032-32-4

$- See Naphtha or Petroleum Distillates

PGME 107-98-2

$- See Propylene Glycol Methyl Ether

PGMEA 108-65-6

$- See Propylene Glycol Methyl Ether Acetate

Phenanthrene 85-01-8

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


Phenol 108-95-2

T-95 XAD-7, 226-95

24 Max. 0.1 max. 10 OSHA 32M HPLC/UV

K $110.00

Phenothiazine 92-84-2


3PC, C-06

100 TWA 15 STEL

1.0 TWA 1.0 STEL


NC $73.00

V02-01-15 91 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Phenyl Chloroformate 1885-14-9

T-153 Amine-treated

XAD-2, 226-153

48 TWA 3 STEL

0.1 TWA 0.2 STEL

5 AIHAJ 12/1986,

pp.742-746 GC/FID


4-Phenyl Cyclohexene 4994-16-5


24 - 100 0.2 0.15 OSHA 7 GC/MS

A $53.00 Carpet gas irritant.

Phenyl Ether 101-84-8


10 - 50 0.2 10 NIOSH 1617 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Phenyl Ether / Biphenyl Mix (eutectic mixture) 101-84-8 & 92-52-4


1 - 40 0.01 - 0.2 5 ug for

each com-

pound

NIOSH 2013 GC/FID

NC $107.00 Analyzed and reported separately as Phenyl Ether and Diphenyl. Synonym: Dowtherm A™

Phenyl Glycidyl Ether 122-60-1


80 - 150 0.1 - 1.0 20 NIOSH 1619 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

m-Phenylenediamine 108-45-2

C-15 GFFs (2),


100 1.0 1.3 OSHA 87 HPLC

NC $110.00

Phosgene 75-44-5

T-153 Amine-treated

XAD-2, 226-153

48 TWA 3 STEL

0.1 TWA 0.2 STEL

5 AIHAJ 12/1986,

pp.742-746 GC/FID


T-117 HMP-Treated

XAD-2, 226-117

100 - 240 0.5 - 1.0 5 OSHA 61 GC/NPD

NC Call for pricing

Samples are subcontracted to an outside laboratory.

Phosphine 7803-51-2

C-9018 GFF/ HgCl2-treat-

ed Polyester, 37mm, 3PC, SKC

PN 225-9018

240 Max TWA 30 STEL

1.0 Max TWA 2 STEL

11 OSHA 1003 ICP

NC $73.00 Special order media - call at least one week in advance. Minimum order of 10 units. Must submit blank.

V02-01-15 92 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Phosphoric Acid 7664-38-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

30 - 960 0.5 - 1.5 10 OSHA ID 111 IC

U $66.00 Transfer filter to vial within 1 hour of sampling.


3 - 100 0.5 10 NIOSH 7903 IC


Phosphorus (applicable to non-volatile phosphorus-containing compounds)

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

100 - 1000 1.0 - 3.0 2 NIOSH 7300 ICP

T $38.00 Not suitable for sampling/analysis of elemental yellow or white phosphorus.

Phosphorus Trichloride 7719-12-2

IMP-14 MFGB, 15 mL DI

Water

25 0.05-0.2 Ap-prox. 7

NIOSH 6402M

ICP

$73.00

o-Phthalaldehyde 643-79-8

T-119 DNPH-Treated

Silica Gel, 226-119

480 Max. 0.03 - 1 0.4 JEM,2008, v10. p1337 HPLC/ UV

NC $110.00 Store media and samples cold, ship cold overnight. Ozone may intefere - use ozone scrubber in known ozone contaminated areas. Any ketone or aldehyde will react with and deplete the DNPH, and is a potential interference. Media contains residual acetonitrile which could interfere with acetonitrile monitoring. Also see Aldehyde profile.

Phthalic Anhydride 85-44-9

C-28 GFFs (2), vera-

trylamine-treated, 37mm, 4PC, C-28

75 - 100 1.0 Max. 2 OSHA 90 HPLC

O $110.00 Sample open faced. Store media cold. Store samples cold if not shipped to lab immediately. Media shelf-life is 1 month.

Pivaloyl Chloride 3282-30-2

T-153 Amine-treated

XAD-2, 226-153

48 TWA 3 STEL

0.1 TWA 0.2 STEL

5 AIHAJ 12/1986,

pp.742-746 GC/FID


PIXE SCAN AIR N/A

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

100 - 1000 1.0 - 2.0 NA SPM PIXE NC $- Covers element range of sodium to uranium. Subcontract-ed to outside laboratory. Analyzed by proton induced x-ray emission spectroscopy.

PIXE SCAN BULK N/A

N/A N/A NA SPM PIXE NC $- Good scan for unknown bulk materials for elemental composition. Subcontracted to outside laboratory.

Platinum 7440-06-4

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

20 - 1000 1 - 3 2 NIOSH 7300M ICP

OO $38.00

Platinum, Soluble Compounds Various

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

500 - 1000 1 - 3 0.1 NIOSH S191 ICP/MS

J $71.00

V02-01-15 93 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

PM10 N/A

$- See Particulate Matter, <10 microns.

Polychlorinated Biphenyls - Caulk (PCBs)

See Environmental Testing Directory

Polychlorinated Biphenyls - Oil (PCBs)

See Environmental Testing Directory

Polychlorinated Biphenyls- Vapor & Particulate (PCBs) N/A

K-02 Swinnex GFF+ 226-39 + vial

50 0.05 - 0.2 (see notes at

right)

0.2 NIOSH 5503 GC/ECD

NC $146.00 Transfer filter and teflon ring to a glass vial immediately after sampling. At low concentrations samples may be col-lected at 1 lpm for up to 24 hours. Sample volume of >200 liters will measure down to the NIOSH REL = 1 ug/M3.

Polynuclear Aromatic Hydrocarbons N/A

K-06 PTFE + ORBO 43

200 - 1000 2 Varies NIOSH 5506 HPLC

N $270.00 Transfer filter to glass vial immediately after sampling, and wrap the vial and tube with aluminum foil to protect from light. Ship samples cold for overnight delivery. Profile includes Acenaphthene, Acenaphthylene, Anthracene, Benzo(k)fluoranthene, Benzo(g,h,i)perylene, Benzo(a)pyrene, Benz(a)anthracene, Benzo(b)fluoranthene, Chry-sene, Dibenz(a,h)anthracene, Fluoranthene, Fluorene, Indeno(1,2,3-cd)pyrene, Naphthalene, Phenanthrene, Pyrene.

Polynuclear Aromatic Hydrocarbons - Selected Analytes N/A


3PC, C-06

960 2 Varies OSHA 58 HPLC

MM $215.00 Transfer filters to glass vials after sampling and wrap with aluminum foil to protect from light. Ship samples by over-night delivery. Analytes includes Anthracene, Benzo(a)pyrene, Chrysene, Phenanthrene, Pyrene.

Potassium 7440-09-7

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 2 NIOSH 7300M

ICP

T $38.00 Elemental potassium analysis can be used to determine equivalent concentrations of potassium compounds.

Potassium Borohydride 13762-51-1

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

48-480 TWA 45 STEL

1-3 TWA 3 STEL

10 NIOSH 7300M

ICP

$38.00 On Analysis Request form specify “Boron” analysis and request results reported as Potassium Borohydride (To convert Boron results to Potassium Borohydride in the same units, multiply Boron analysis results by 10. Note: This test is not chemically specific in that all sources of Boron will contribute to the total result).

Potassium Hydroxide, measured as Alkaline dust 1310-58-3

C-66 PTFE, 1um,

37mm, 2PC, C-66

70 - 1000 1.0 - 4.0 60 NIOSH 7401 Titration

NC $66.00 Also see entry for Alkaline Dust. This test provides a single cumulative measure of all alkaline aerosols present in the exposure; e.g., sodium hydroxide, potassium hydrox-ide, sodium bicarbonate, calcium carbonate, etc. The acid-base titration test is not compound-specific, but the result will be expressed in terms of the alkaline compound identified on the test request form. Acid compounds pres-ent in the sampling environment will be negative interfer-ences in the measurement.

V02-01-15 94 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Potassium Hydroxide (by elemental potassium anal-ysis with KOH-equivalent calculation) 1310-58-3

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 3 NIOSH 7300M

ICP

T $38.00 Elemental analysis for potassium is performed, and a potassium hydroxide equivalent result is calculated. Other potassium compounds are a positive interference. Mineral acids will not interfere.

Potassium Persulfate, As Persulfate 7727-21-1

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

480-960 TWA 60 STEL

1-4 TWA 4 STEL

0.5 NIOSH 7300 ICP

$38.00 Wen submitting samples specify analysis for “Potassium Persulfate, AS PERSULFATE” in order to have results reported correctly as persulfate. This test is not chemically specific; all sources of Potassium will contribute to the total result.

Primene 81R® Amine 68955-53-3

T-93 XAD-4, 226-93

10 TWA 3 STEL

0.025-0.2 13 IN-HOUSE GC/FID


2-Propanol See Isopropanol.

2-Propenol 107-18-6

$- See Allyl Alcohol.

Propionaldehyde 123-38-6

T-119 DNPH-Treated

Silica Gel, 226-119

1 - 30 0.05 - 0.5 0.50 TO-11 HPLC

N $110.00 Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concentrations of acetone or MEK will compete with the aldehyde and are therefore po-tential negative interferences. Refrigerate before and after sampling and ship overnight. Also see aldehyde profiles.

Propionic Acid 79-09-4


1 - 24 0.05 - 0.2 10 NIOSH 2011M

IC/Cond.

V $66.00

1-Propoxy-2-Propanol 30136-13-1

$- See Propylene Glycol Propyl Ether.

n-Propyl Acetate 109-60-4


1 - 10 0.01 - 0.2 10 NIOSH 1450 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

n-Propyl Alcohol 71-23-8


1 - 10 0.01 - 0.2 20 NIOSH 1401 GC/FID

C $53.00 Synonyms: 1-Propyl alcohol, 1-Propanol.

M-3500 3M POVM 3500


C $53.00 Synonyms: 1-Propyl alcohol, 1-Propanol.

Propyl Bromide 106-94-5

$- See 1-Bromopropane

V02-01-15 95 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

2-Propylbromide 75-26-3

$- See 2-Bromopropane

Propylene Dichloride 78-87-5

T-81 Anasorb 747,

226-81

1 - 3.5 0.01 - 0.2 20 NIOSH 1013M GC/FID

NC $73.00 Synonym: 1,2-Dichloropropane.

M-3500 3M POVM 3500


NC $73.00 Synonym: 1,2-Dichloropropane.

Propylene Glycol 57-55-6

T-57 GFF/XAD-7 OVS,

226-57

5 - 60 0.5 - 2.0 20 NIOSH 5523 GC/FID

K $73.00 Also see Glycol Profile.

Propylene Glycol n-Butyl Ether5131-66-8


5 - 10 0.1 20 OSHA 99M GC/FID

E $53.00 Synonyms: 1-Butoxy-2-Propanol, also DOWANOL® PnB

Propylene Glycol Methyl Ether 107-98-2


5 - 10 0.1 20 OSHA 99 GC/FID

E $53.00 Synonyms: 1-Methoxy-2-Propanol, PGME.

M-3500 3M POVM 3500


E $53.00 Synonyms: 1-Methoxy-2-Propanol, PGME.

Propylene Glycol Methyl Ether Acetate 108-65-6


5 - 10 0.2 20 OSHA 99 GC/FID

E $53.00 Synonyms: 1-Methoxy-2-Propyl Acetate, PGMEA.

M-3500 3M POVM 3500


E $53.00 Synonyms: 1-Methoxy-2-Propyl Acetate, PGMEA.

Propylene Glycol Propyl Ether 1569-01-3


10 0.1 20 OSHA 7 GC/FID

E $53.00 Synonyms: n-Propoxypropanol, 1-Propoxy-2-Propanol, Propasol P.

Propylene Oxide 75-56-9


5 0.05 - 0.2 20 NIOSH 1612 GC/FID

A $53.00

M-3520 3M POVM 3520,

2-stage


A $53.00

Pseudocumene 95-63-6

$- See 1,2,4-Trimethylbenzene.

Pyrene 129-00-1

K-06 PTFE + ORBO 43

200-1000 2 3 NIOSH 5506 HPLC


V02-01-15 96 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Pyrethrum8003-34-7


3PC, C-06

20 - 400 1.0 - 4.0 0.2 NIOSH 5008 HPLC

NC $110.00

Pyridine 110-86-1


18 - 150 0.01 - 1.0 10 NIOSH 1613 GC/FID

I $53.00

Pyrrolidine 123-75-1


XAD-2, 226-30-18

1 - 20 0.01 - 0.1 2 NIOSH 2540M HPLC

N $152.00 Contact laboratory before sampling and/or sending sam-ples. Ship samples immediately after sampling (next day delivery).

Quartz 14808-60-7

$- See Silica - Crystalline Profile

Quinone 106-51-4

T-30 XAD-2 Tube,

226-30

24 TWA 3 STEL

0.01-0.2 TWA 0.2 STEL

2 NIOSH S181M

HPLC/UV

NC $110.00 Samples must be analyzed within 7 days.

Refractory Ceramic Fibers N/A

$- See Fiber Count, Total - “B” counting rules.

Refrigerant 11 75-69-4

$- See Trichlorofluoromethane.


$- See 1,1,2-Trichloro-1,2,2-Trifluoroethane.


$- See 1,2-Dichloro-1,1,2,2-Tetrafluoroethane.


$- See Dichlorodifluoromethane.


$- See 2,2-Dichloro-1,1,1-Trifluoroethane.

Refrigerant 134a 811-97-2

$- See 1,1,1,2-Tetrafluoroethane.

Refrigerant 141b 1717-00-6

$- See 1,1-Dichloro-1-Fluoroethane.


$- See Dichlorofluoromethane. Note low recommended air volumes.


$- See Chlorodifluoromethane.

V02-01-15 97 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Refrigerant 225 ca & cb 135151-96-1

T-09 (2) Charcoal, 226-09

1 - 4 0.01 - 0.05 20 NIOSH 1018M GC/FID

I $72.00 Each component (ca & cb) reported separately. Two (2) tubes in series. Second tube can be smaller 226-01. Also known as HCFC 225, AK-225 (TM) and dichloropentafluo-ropropane. HCFC-225 ca = 3,3-dichloro-1,1,1,2,2-penta-fluoropropane (CAS 422-56-0), HCFC-225cb = 1,3-di-chloro-1,1,2,2,3-pentafluoropropane (CAS 507-55-1).

M-3520 3M POVM 3520,

2-stage


l $72.00 Each component (ca & cb) reported separately. Also known as HCFC 225, AK-225 (TM) and dichloropentafluo-ropropane. HCFC-225 ca = 3,3-dichloro-1,1,1,2,2-penta-fluoropropane (CAS 422-56-0), HCFC-225cb = 1,3-di-chloro-1,1,2,2,3-pentafluoropropane (CAS 507-55-1).



Resorcinal 108-46-3

T-57 13 mm GFF +

200/100 XAD-7 OVS, 226-57

60 Max 1 Max 20 OSHA PV2053 GC/FID

K $105.00

Ribavirin 36791-04-5


3PC, C-06

40 - 1000 1.0 - 3.0 1 NIOSH 5027 HPLC

NC $110.00 Not chemically specific.

Sebacic Acid as Particulate 111-20-6


C-11


NC $20.00

Selenium 7782-49-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

40 - 1000 1.0 - 3.0 1.0 NIOSH 7300 ICP-OES

T $38.00

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

40 - 1000 1.0 - 3.0 0.125 NIOSH 7300 ICP-MS

T $44.00

Sevin/Carbaryl 63-25-2


226-30-16

60 Max 1.0 Max 5 OSHA 63 HPLC/UV

NC $110.00

V02-01-15 98 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Sevoflurane 28523-86-6

T-81 Anasorb 747,

226-81

3 Max 0.05 Max 20 OSHA 103M GC/FID

CC $73.00

M-02 SKC POVM,

575-002

See note at right.

40 OSHA 103M GC/FID

A $73.00 Not recommended due to reverse diffusion.

M-3520 3M POVM 3520,

2-stage


A $73.00

Silane A-189 See entry for Mercaptopropyltrimethoxysilane, Gamma

Silica - Amorphous (Diatomaceous Earth), Total 7631-86-9

C-11 or C-12 PVC, Preweighed, 37mm, 5um, 2PC,

C-11

816-1320 2-4 NIOSH 7501 XRD

NC Call for pricing

Analysis is subcontracted to outside laboratory

Silica - Amorphous (Fume), Respirable 69012-64-2


C-12

816-1300 Dependent on cyclone

type

NIOSH 7501 XRD

NC Call for pricing

Silica - Cristobalite 14464-46-1

$- See Silica, Crystalline Profile

Silica - Crystalline Profile Multiple


C-11

816-1300 See comments

5 (each poly-

morph)

NIOSH 7500 XRD

NC $93.00 *Sampling rate is dependent on cyclone used - SKC Aluminum Cyclone - 2.5 LPM, Nylon Dorr-Oliver Cyclone - 1.7 LPM. Preweighed PVC cassette and gravimetric analysis are required to calculate % silica for OSHA PEL calculation. Profile includes gravimetric analysis, quartz (14808-60-7), cristobalite (14464-46-1), and tridymite (15468-32-3). Interferences include any compound that has a diffraction line that coincides with the primary or secondary lines of quartz . Common interferences are bauxite, mica, potash, feldspar, graphite, and zircon.

Silica - Crystalline Bulk Multiple

Vial or bag 2 - 5 gms N/A 1.0% NIOSH 7500 XRD

NC $128.00 Profile includes quartz (14808-60-7), cristobalite (14464-46-1), and tridymite (15468-32-3). Interferences include any compound that has a diffraction line that coincides with the primary or secondary lines of quartz . Common interferences are bauxite, mica, potash, feldspar, graphite, and zircon.

Silica - Fused, Respirable 60676-86-0


C-12

800-1300 Dependent on cyclone

type

5 NIOSH 7501 XRD

NC $- Samples subcontracted to outside laboratory

V02-01-15 99 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Silica - Quartz 14808-60-7

$- See Silica, Crystalline Profile

Silicon Tetrahydride (Silane) 7803-52-3

IMP-15 MFGB, 15 mL 0.01N KOH

380 - 400 0.8 1 NIOSH 7300M

ICP

NC $38.00 Analysis is for dissolved silicon. Since the Midget Fritted Glass Bubbler (MFGB) is glass, creation and submission of a field blank is critical; maintain the field blank solution in the MFGB for same duration as samples. Transfer to plastic vial immediately after sampling. All other hydrolyz-able silicon hydrides will interfere, as will soluble particu-late silicates. Also submit a portion of unused collecting solution for testing as a Reagent Blank.

Silver, Metal and Soluble Compounds 7440-22-4

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 2000 1.0 - 3.0 1 NIOSH 7300 ICP

T $38.00

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

51 - 2000 1.0 - 3.0 0.025 NIOSH 7300M ICP/MS

T $44.00

Skane M-8(R) Biocide 26530-20-1

$- See Kathon 893™ Biocide.

Sodium 7440-23-5

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 2.5 NIOSH 7300M

ICP

T $38.00 Blank is important to correct for amount of sodium found in MCE filters.

Sodium Bisulfite as Particulate 7631-90-5


C-11


NC $20.00 Not chemically specific.

Sodium Borohydride 16940-66-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

48-480 TWA 45 STEL

1-3 TWA 3 STEL

7 NIOSH 7300M

ICP for B

T $73.00 On Analysis Request form specify “Boron” analysis and request results reported as Sodium Borohydride (To convert Boron results to Sodium Borohydride in the same units, multiply Boron analysis results by 3.5. Note: This test is not chemically specific in that all sources of Boron will contribute to the total result).

Sodium Cyanoborohydride 25895-60-7

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

48-480 TWA 45 STEL

1-3 TWA 3 STEL

12 NIOSH 7300M

ICP for B

T $73.00 On Analysis Request form specify “Boron” analysis and request results reported as Sodium Cyanoborohydride (To convert Boron results to Sodium Cyanoborohydride in the same units, multiply Boron analysis results by 5.83. Note: This test is not chemically specific in that all sources of Boron will contribute to the total result).

V02-01-15 100 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Sodium Hydride 7646-69-7

C-08 PTFE, 37mm,

2um, 3PC, C-08

480 TWA 60 STEL

1-4 TWA 4 STEL

0.25 NIOSH 7300M

ICP

T $73.00 Note: Obtain low sodium (pre-rinsed) Teflon filters from lab. Submit 3 blanks along with each group of samples in order to adequately correct for sodium background and avoid false positives. Request analysis for “sodium”, to be reported as “sodium hydride”.The ACGIH states that if instantaneous monitoring is not feasible, ceiling values “can be assessed by sampling over a period that should not exceed 15 minutes, except for those substances that may cause immediate irritation when exposures are short.” Not chemically specific.

Sodium Hydrosulfite as Particulate 7775-14-6


C-11

100-480 TWA 60 STEL


NC $20.00 Analysis is not compound-specific.

Sodium Hydroxide, measured as Alkaline Dust 1310-73-2

C-66 PTFE, 1um,

37mm, 2PC, C-66

70 - 1000 1.0 - 4.0 40 NIOSH 7401 Titration

NC $66.00 Also see Alkaline Dust as NaOH. This test provides a single cumulative measure of all alkaline aerosols present in the exposure; e.g., sodium hydroxide, potassium hy-droxide, sodium bicarbonate, calcium carbonate, etc. The acid-base titration test is not compound-specific, but the result will be expressed in terms of the alkaline compound identified on the test request form. Acid compounds pres-ent in the sampling environment will be negative interfer-ences in the measurement.

Sodium Hydroxide (calculated from measured sodium concentration) 1310-73-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 4.5 NIOSH 7300M

ICP

T $38.00 Elemental analysis for sodium is performed, and a sodium hydroxide equivalent result is calculated. Other sodium compounds are a positive interference. Mineral acids will not interfere.

Sodium Persulfate, As Persulfate 7775-27-1

C-08 PTFE, 37mm,

2um, 3PC, C-08

480-960 TWA 60 STEL

1-4 TWA 4 STEL

40 NIOSH 7300 ICP

T $38.00 Request analysis of “Sodium Persulfate, AS PERSUL-FATE” in order to have results reported correctly as persul-fate (To convert “Sodium” results to “Sodium Persulfate, as Persulfate”, multiply by 4.18).

Solder Operations Profile N/A

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

480 - 960 1.0 - 3.0 VAR-IES

OSHA ID-206 ICP

NC $121.00 Includes Antimony, Beryllium, Cadmium, Copper, Lead, Silver, Tin, Zinc Oxide. 960 liters needed to determine silver at the TLV.

Solvesso 100 N/A

$- See Aromatic 100

Solvesso 150 N/A

$- See Aromatic 150

V02-01-15 101 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Stearic Acid as Particulate 57-11-4


C-11


$20.00 Test is not chemically specific.

Stoddard Solvent 8052-41-3


1 - 20 0.01 - 0.2 50 OSHA 48 GC/FID

A $73.00 Ship a 5 ml bulk sample separately.

M-3500 3M POVM 3500


A $73.00 Ship a 5 ml bulk sample separately.

Strontium 7789-06-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0-3.0 2 NIOSH 7300M

ICP

T $38.00

Strontium Chromate (as Cr VI) 133-82-0

$- See Chromium, Hexavalent.

Styrene 100-42-5


5 - 15 0.1 - 0.2 80 NIOSH 1501 GC/FID

A $53.00

T-73 TBC-Treated

charcoal, 226-73

5 - 15 0.05 - 0.2 40 OSHA 89 GC/FID

CC $53.00 Recommended method due to improved desorption efficiency.

M-3500 3M POVM 3500


A $53.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00

M-02 SKC POVM,

575-002

8hrs (max) TWA

15min STEL


GC/FID

A $73.00

Sulfate Particulate N/A

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

30 - 100 0.5 - 1.5 5 NIOSH 6004 IC

U $66.00 Test is not compound-specific; all water soluble sulfates, including sulfuric acid, are measured.

V02-01-15 102 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Sulfur Dioxide 7446-09-5

K-05 KOH-treated Ana-sorb 747, 226-80

12-24 0.1 8.33 OSHA ID 200 IC

NC $66.00 Do not return pre-filter for analysis unless soluble sulfate particulates are needed.

C-25 MCE/Na2CO3-

treated filter, 37mm, 4PC, C-25

22.5-200 0.5 - 1.5 7 NIOSH 6004 IC

NC $66.00 15 minute sample at 1.5 LPM measures down to 0.12 ppm SO

2, approx. 50% of ACGIH STELTLV.

Sulfur Dioxide & Particu-late Water Soluble Sulfates 7446-09-5

C-25 MCE/Na-

2CO3-treated filter, 37mm, 4PC, C-25

22.5 -200 0.5 - 1.5 7 NIOSH 6004 IC

NC $110.00 Sulfur trioxide gas, if present in dry atmospheres, may give a positive interefere. Built-in prefilter may be tested for water-soluble sulfate/sulfite particulates if needed.

Sulfur Dioxide 7446-09-5

M-UMEX-200 SKC UMEX SO2/NO2 PM 500-100

15 min - 8 hrs 0.0151 2 NIOSH 6004M IC

NC $66.00 Return to aluminized pouch after sampling and seal for storage and shipping. Samples are stable at ambient temperature for at least 3 weeks after sampling.

Sulfur Hexafluoride 2551-62-4

Call lab - NIOSH S244 GC/MS

Call for pricing

WARNING - DO NOT SHIP BY AIR. Samples subcon-tracted to outside laboratory.

Sulfuric Acid 7664-93-9

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

30 - 480 0.5 - 2.0 5 OSHA ID 113 IC

U $66.00 Recommended method. Transfer filter to vial within 1 hour of sampling.


30 - 100 0.2 - 0.5 5 NIOSH 7903 IC


Talc, Respirable Fraction (containing no asbestos, Crystalline silica <1%) 14807-96-6

*C-11 or C-12 *PVC, Pre-


*816 - 1300 *See comments

100 NIOSH 7500 Mod. XRD

W $93.00 *Cassette type (2- or 3-piece) and sampling rate is depen-dent on cyclone used - SKC Aluminum Cyclone - 2.5 LPM, Nylon Dorr-Oliver Cyclone - 1.7 LPM. Gravimetric analysis alone may be sufficient for assessment. Any mineral hav-ing similar x-ray diffraction spectra may interfere.

TAME 994-05-8

$- See t-Amyl Methyl Ether.

TCE 79-01-6

$- See Trichloroethylene

TDI, 2,4 & 2,6 584-84-9

$- See Toluene Diisocyanate

Tellurium 13494-80-9

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

80 - 1000 1.0 - 3.0 2 NIOSH 7300 ICP

T $38.00

V02-01-15 103 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Terephthalic Acid as Particulate 100-21-0

C-11PVC, Preweighed, 37mm, 5um, 2PC,

C-11


$20.00 Not chemical specific.

p-Tert-Butyl Toluene 98-51-1


10 - 30 0.01 - 0.2 20 NIOSH 1501 GC/FID

A $53.00

1,1,2,2-Tetrabromoethane 79-27-6


50 - 100 0.2 - 1.0 20 NIOSH 2003 GC/FID

W $53.00

1,1,2,2-Tetrachloroethane 79-34-5

M-3500 3M POVM 3500


A $73.00 Synonym: Acetylene Trichloride.

M-01 SKC POVM,

575-001

8 Hrs 0.012 40 NIOSH 1019M GC/FID

A $73.00

T-81 Anasorb 747,

226-81

3 - 30 0.01-0.2 20 NIOSH 1019 GC/FID

A $73.00

Tetrachloroethylene 127-18-4


0.2 - 40 0.01 - 0.2 20 NIOSH 1003 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Tetraethyl Lead (as Pb) 78-00-2


30 - 200 0.01 - 1.0 0.8 Ethyl Corp. ICP

NC $73.00 Needs prefilter if airborne particulate lead is present; contact lab for this prefilter. All other volatile lead organic vapors will interfere.


480 Max 1.0 Max 0.8 OSHA StopgapM

ICP

NC $73.00 Needs prefilter if airborne particulate lead is present; contact lab for this prefilter. All other volatile lead organic vapors will interfere.

1,1,1,2-Tetrafluoroethane 811-97-2

T-01 (2 in series) Charcoal, 226-01,

2 in series

0.5 - 2.0 0.01 - 0.035 50 NIOSH 1020M GC/FID

A $73.00 Cap tubes separately after sampling. Synonym: Refriger-ant 134a.

Tetrahydrofuran (THF) 109-99-9


1 - 9 0.01 - 0.2 10 NIOSH 1609 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

V02-01-15 104 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Tetramethylsuccino Nitrile 3333-52-6


55 Max 0.05 - 1.0 10 NIOSH S155 GC/FID

A $73.00 Synonym: TMSN.

TGIC 2451-62-9

$- See Triglycidyl Isocyanurate.

Thallium 7440-28-0

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

80 - 1000 1.0 - 3.0 2 NIOSH 7300 ICP

T $38.00

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

80 - 1000 1.0 - 3.0 0.025 NIOSH 7300M

ICP/MS

T $44.00

Thioglycolic Acid 68-11-1

IMP-11 Impinger, DI Water

120 Max 1.0 Max 30 OSHA Stopgap HPLC

NC Call for pricing

Tin 7440-31-5

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

20 - 1000 1.5 2.0 OSHA ID 125 ICP-OES

EE $38.00

Tin, Total Organotin Compounds as Tin Various


226-30-16

50 - 500 1.5 Max 0.50 NIOSH 5504M GFAA

NC $226.00 Store samples cold and ship cold by overnight delivery. The organotin compound being monitored must be identified to the laboratory, and a reference standard must be available for the testing. Additional charges may apply for procurement of the reference standard, or it may be necessary for the customer to provide a small portion (1 - 2 grams) of the relatively-pure organotin compound along with the known purity. A 3-sample-minimum charge ap-plies for this test. Samples are extracted with an acidified organic solvent, and the extracts are tested for dissolved tin, but the testing is not compound-specific. This meth-od will not work for the most volatile organotin compounds; see separate entries for methyltin trichloride, dimethyltin dichloride, and trimethytin chloride by NIOSH 5526.

Titanium 7440-32-6

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 2.0 OSHA ID 125 ICP

EE $38.00

Titanium Dioxide 13463-67-7

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

100 - 1000 2.0 3.3 OSHA ID 125 ICP

EE $38.00 Analysis is for Total Titanium, with calculated equivalent as TiO2 reported.

TMSN 3333-52-6

$- See Tetramethyl Succinonitrile

V02-01-15 105 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Toluene 108-88-3


2 - 15 0.02 - 0.2 10 NIOSH 1501 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00

M-02 SKC POVM,

575-002


GC/FID

A $73.00

Toluene Diisocyanate, 2,4 & 2,6 584-84-9 & 91-08-7

K-20 OSHA Isocya-


right).

15 - 240 0.2 - 1.0 0.12 OSHA 42 HPLC/FL


o-Toluidine 95-53-4


10 - 150 0.02 - 1 20 NIOSH 2002 GC/FID

M $53.00

Total Hydrocarbons, as n-Hexane (VOC’s) N/A

$- See Hydrocarbons, Total as n-Hexane

Total Hydrocarbons, as n-Hexane, High Resolution N/A

$- See Hydrocarbons, Total as n-Hexane - High Resolution.

Tribromomethane 75-25-2

$- See Bromoform.

Tributyl phosphate 126-73-8

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

90 1.5 2 NIOSH 5034 GC/MS

NC Call for pricing

Samples subcontracted to outside laboratory.

1,2,4-Trichlorobenzene 120-82-1

K-11 C-45 Cassette + 226-30-04 tube, Tubing Adapter and 15mL Vial

3 - 12 0.01 - 0.2 0.1 NIOSH 5517 GC/ECD

S $97.00 Transfer filter to vial after sampling; cassette may be omitted if no aerosols are present. Samples are stable at least 13 days at ambient temperature.

V02-01-15 106 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

1,1,1-Trichloroethane 71-55-6

$- See methyl chloroform

1,1,2-Trichloroethane 79-00-5


2 - 10 0.01 - 0.2 10 NIOSH 1003M GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Trichloroethene 79-01-6

$- See trichloroethylene.

Trichloroethylene 79-01-6


1 - 30 0.01 - 0.2 10 NIOSH 1022M GC/FID

A $53.00

M-3500 M POVM 3500


A $53.00

Trichlorofluoromethane 75-69-4


0.3 - 7 0.01 - 0.05 50 NIOSH 1006 GC/FID

A $73.00 Ship cold overnight. Synonym: Refrigerant 11.

1,1,2-Trichloro-1,2,2-triflu-oroethane 76-13-1


0.1 - 3 0.01 - 0.05 20 NIOSH 1020 GC/FID

A $73.00

M-3520 3M POVM 3520,

2-stage

1 Hour 0.0291 30 NIOSH 1020M GC/FID

A $73.00

Triethanolamine 102-71-6


3PC, C-06

120 1 40 OSHA PV2141 GC/FID

NC $73.00

Triethylamine 121-44-8



TWA 10 STEL 3

0.2 Max. 20 OSHA PV2060M

IC

NC $97.00 Submit for analysis as soon as possible after sampling. If delay is unavoidable, store cold and ship cold by overnight delivery.


20 Max 0.2 Max 20 OSHA PV2060M

IC

NC $97.00 Submit for analysis as soon as possible after sampling. If delay is unavoidable, store cold and ship cold by overnight delivery. A minimum volume of 3 Liters is required for STEL sampling.

Triethylene Glycol 112-27-6

T-57 GFF/XAD-7 OVS,

226-57

60 - 200 0.5 - 1.0 20 NIOSH 5523 GC/FID

JJ $73.00 Also see Glycol Profile.

V02-01-15 107 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Triethylenetetramine 112-24-3


XAD-2, 226-30-18

10 Max 0.1 Max 10 OSHA 60 HPLC/UV


Trifluoroacetic Acid 76-05-1


100 Max 0.5 Max 20 NIOSH 7903M

IC

U $66.00

1,3,5-Triglycidyl Isocyan-urate 2451-62-9

C-51 GFF, HBr Treated, 37mm, 2PC, C-51

60 Max 1 Max 1.5 OSHA PV2055M

HPLC

NC $134.00

Triisobutyl Phosphate 126-71-6


60 - 120 0.15 - 0.3 IN-HOUSE GC/MS

NC Call for pricing


Triisopropanolamine as Particulate 122-20-3


C-11

100-480 TWA 60 STEL

1-4 TWA 4 STEL

50 NIOSH 0500 Gravimetric


Trimellitic Anhydride552-30-7

C-28 GFFs (2),


30 - 480 2 Max. 0.5 OSHA 98M HPLC/UV

NC $110.00 Sample open-face. Media has 1-month shelf life. Store in refrigeration and ship as soon as possible after sampling.

1,2,3-Trimethyl Benzene 526-73-8


10 - 30 0.01 - 0.2 10 NIOSH 1501 GC/FID

A $53.00

M-3500 3M POVM 3500

Up to 8 hours 15 NIOSH 1501 GC/FID

A $53.00



10 - 30 0.01 - 0.2 10 NIOSH 1501 GC/FID

A $53.00

M-3500 3M POVM 3500

Up to 8 hours 0.0244 15 NIOSH 1501 GC/FID

A $53.00



10 - 30 0.01 - 0.2 10 NIOSH 1501 GC/FID

A $53.00

M-3500 3M POVM 3500

Up to 8 hours 0.0263 15 NIOSH 1501 GC/FID

A $53.00

2,2,4-Trimethyl Pentane 540-84-1

$- See Isooctane.

V02-01-15 108 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Trimethylamine 75-50-3



5 - 10 0.05 - 0.1 4 NIOSH 6016M

IC


T-98H3PO4-treated XAD-7, 226-98

20 max TWA 3.0 STEL

0.05-0.2 TWA 0.2 STEL

4 OSHA PV2060

IC


Trimethylolpropane Triacrylate 15625-89-5

T-95 XAD-7, 226-95

10 0.02 3.5 OSHA CSI HPLC/UV

NC Call for pricing

Samples are subcontracted to outside laboratory.

2,4,4-Trimethylpentene 25157-70-8

$- See Diisobutylene.

Trimethyltin Chloride 1066-45-1


226-30-16

15-75 TWA (Max)

15 STEL

0.25 TWA 1.0 STEL


NC Call for pricing

Note: This is a labor-intensive analysis requiring a dedicat-ed instrument and there is a 3 sample minimum. Analysis available for the following agents on one sample: methyltin dichloride, dimethyltin dichloride, and trimethyltin chloride. This analysis is subcontracted to another laboratory.

Triorthocresyl Phosphate 78-30-8

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

150 1.5 Max. 2 NIOSH S209M GC/MS

NC $152.00

1,1,1 Tris(hydroxymethyl) Propane 77-99-6

See Trimethylolpropane Triacrylate.

Tungsten, Total 7440-33-7

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

960 Max 2 10 OSHA ID213 ICP-OES

NC $77.00 Sample can also be tested for cobalt, otherwise sample other metals separately.

Turpentine 8006-64-2


1 - 10 0.01 - 0.2 100 NIOSH 1551 GC/FID

A $73.00 Measures principle isomers of pinene.

Uranium 7440-61-1

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 2 NIOSH 7300M

ICP-OES

T $38.00

Vanadium 7440-62-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 2 NIOSH 7300M

ICP

T $38.00

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

50 - 1000 1.0 - 3.0 0 NIOSH 7300M ICP-MS

T $44.00

V02-01-15 109 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Vanadium Pentoxide 1314-62-1

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

300 - 1000 1.7 - 2.0 3.6 NIOSH S388M

ICP

NC $53.00 Test is for vanadium that is extractable in a weak alkaline solution, expressed as V205.

Vertrel XF (DuPont Product) 138495-42-8


Vinyl Acetate 108-05-4

M-02 SKC POVM, 575-

002

30 min - 8 hours


GC/FID

A $73.00 If samples will not be shipped within 24 hours after sampling, store samples in a chemical freezer (<0 C) until shipment. Ship samples refrigerated by overnight delivery.

T-81 Anasorb 747,

226-81

10 TWA 3 STEL

0.03-0.2 TWA 0.2 STEL


GC/FID

A $73.00 If samples will not be shipped within 24 hours after sampling, store samples in a chemical freezer (<0 C) until shipment. Ship samples refrigerated by overnight delivery.

O-92 Carboxen 564,

ORBO 92

24 0.1 20 OSHA 51 GC/FID

E $53.00

M-3500 3M POVM 3500


A $53.00 Store samples cold, ship cold overnight to expedite analysis.

Vinyl Chloride 75-01-4

T-01 (2) Charcoal, 226-01

0.7 - 5.0 0.05 2 NIOSH 1007 GC/FID

A $73.00 Ship samples refrigerated by overnight delivery.

M-3520 3M POVM 3520,

2-stage

2 hours 0.0408 3 NIOSH 1007M GC/FID

A $73.00 Ship samples refrigerated by overnight delivery.

O-91 Carbosieve

S-III,Orbo 91

3 0.05 3 OSHA 75 GC/FID

F $73.00

4-Vinyl-1-cyclohexene 100-40-3


10 0.2 Max 1.1 OSHA 07 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

3-Vinyl Pyridine $- See 3-Ethenyl Pyridine.

n-Vinyl 2-Pyrrolidone (NVP) 88-12-0


12 0.1 20 NIOSH 1302M GC/FID

E $53.00

V02-01-15 110 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Vinyl Toluene 25013-15-4


10 - 24 0.01 - 0.2 100 NIOSH 1501 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

Vinylidene Chloride 75-35-4

$- See 1,1-Dichloroethylene.

VM & P Naphtha8032-32-4

$- See Naphtha, VM&P.

Volatile Organic Compounds N/A

$- See Hydrocarbons, Total as n-Hexane.

Welding Fume Particulates N/A

C-04 MCEF, 37mm, 0.8um, 3PC,


200 - 1000 1 - 3 100 NIOSH 0500 Gravimetric

$20.00 Matched weight filter allows for metals analysis.

Welding Fumes Profile - Air N/A

C-04 MCEF, 37mm, 0.8um, 3PC,


200 Liters, 480 Liters needed to allow detec-tion of Cadmi-um at OSHA action level

1.0 - 2.0 Varies by ele-ment

OSHA ID-125 ICP

EE $187.00 Profile includes Aluminum, Antimony, Beryllium, Cadmi-um, Chromium, Cobalt, Copper, Iron, Lead, Manganese, Molybdenum, Nickel, Titanium, Vanadium, Zinc & Total Particulates.

Welding Fumes Profile - Bulk N/A

Vial or Bag NA NA Varies by ele-ment

OSHA ID-125 ICP

EE $215.00 Profile includes Aluminum, Antimony, Beryllium, Cadmi-um, Chromium, Cobalt, Copper, Iron, Lead, Manganese, Molybdenum, Nickel, Titanium, Vanadium, Zinc

Welding Fumes Profile - Wipe N/A

K-07 Ghost Wipe Kit

100 sq cm NA Varies by ele-ment

OSHA ID-125 ICP

EE $215.00 Profile includes Aluminum, Antimony, Beryllium, Cadmi-um, Chromium, Cobalt, Copper, Iron, Lead, Manganese, Molybdenum, Nickel, Titanium, Vanadium, Zinc. Use “Ghost” wipe.

Wood Dust N/A


C-11


$20.00 Includes total airborne particulates. No speciation possi-ble as to wood dust type.

V02-01-15 111 800-888-8061

Analyte CAS #

Recommeded Media

Suggested Volume, L

Sampling Rate, LPM

LOQ, μg

MethodTechnique

LabCode

Unit Cost USD

General Comment

Xylene, all isomers 1330-20-7


2 - 30 0.02 - 0.2 10 NIOSH 1501 GC/FID

A $53.00

M-3500 3M POVM 3500


A $53.00

T-81 Anasorb 747,

226-81

10 TWA 3 STEL


GC/FID

A $73.00

M-02 SKC POVM,

575-002



GC/FID

A $73.00 Samples subcontracted to outside laboratory.

m-Xylenediamine 1477-55-0

C-15 GFFs (2),


100 TWA 15 STEL

1.0 TWA 1.0 STEL

0.2 OSHA Method 105M

HPLC/UV

NC $110.00

Xylidine (Mixed Isomers) 1300-73-8, also 95-68-1


96 TWA 7.5 STEL

0.2 TWA 0.5 STEL


NC Call for pricing


2,4-Xylidine 1300-73-8


96 TWA 7.5 STEL

0.2 TWA 0.5 STEL


NC Call for pricing


2,5-Xylidine 95-78-3


96 TWA 7.5 STEL

0.2 TWA 0.5 STEL


NC Call for pricing


Zinc and Zinc Compounds 7440-66-6

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

20 - 1000 1.0 - 3.0 2 NIOSH 7300 ICP

T $38.00 Other forms of Zinc including metallic zinc and zinc salts can interfere. Total Zinc as ZnO.

Zinc Oxide 1314-13-2

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

20 - 1000 1.0 - 3.0 2.6 NIOSH 7300 ICP

T $38.00 Same species of zirsonium may not be solubilized by this procedure.

Zirconium 7440-67-7

C-05 MCEF, 37mm,

0.8um, 3PC, C-05

20 - 1000 1.5 2 NIOSH 7300 ICP

T $38.00

V02-01-15 112 800-888-8061

2.3 Profiles

Analytics was a pioneer with the concept of IH profiles to better offer our clients an affordable approach to large scale IH testing. Our profiles include organics (29 solvents), PAHs (16 analytes), welding fumes (15 metals plus particulates), crystalline silica (3 most common), and customized profiles to meet your specific testing requirements. Analytics can also customize a profile to meet your specific requirements while at the same time, saving you money. Please do not hesitate to contact Analytics about setting up your customized profile.

Profile Analytes Media Volume Sampling

Rate Method Technique Price

Acrylate Monomer Profile

Methyl Acrylate, n-Butyl Acrylate, N-Butyl Methacrylate, Ethyl Acrylate, Methyl Methacrylate

Anasorb 747 Tube (226-81)

3 - 12 Liters 0.02 - 0.2 LPM

Propri-etary, IH-GC-P029

GC/FID $110.00

SKC 575-002 PM 8 hours Max. Various

3M POVM 3500 8 hours Max. Various

Aldehyde Profile Acetaldehyde, Acrolein, Butyraldehyde, Formaldehyde, Glutaraldehyde, Isovaleraldehyde

DNPH Tube, 226-119

16 - 30 Liters 0.2 - 1.0 LPM

EPA TO-11

HPLC/UV $242.00

UMEX-100 Up to 8 hours - - EPA TO-11M

HPLC/UV $242.00

Preferred active sampling method. For STEL sampling, collect a 15-minute sample at 1 LPM. Ozone may intefere - use ozone scrubber in known ozone con-taminated areas. Any ketone or aldehyde will react with the DNPH and is a potential interference. Large concentrations of acetone or MEK will compete with the aldehyde and are therefore potential negative interferences. Refrigerate before and after sampling and ship overnight. Media contains residual acetonitrile which could interfere with acetonitrile monitoring.

Aromatic Hydrocarbon Profile

Benzene, Chlorobenzene, Cumene, o-Dichloroben-zene, p-Dichlorobenzene, Ethyl Benzene, alpha-Methyl Styrene, Naphthalene, para-tert-Butyl Toluene, Styrene, Toluene, Vinyl Toluene, Xylene

Charcoal Tube, T-01, 226-01

10 Liters 0.1 - 0.5 LPM

NIOSH 1501

GC/FID $143.00

3M 3500/3520, SKC 575-001

8 hours Max. Various NIOSH 1501M

GC/FID $143.00

V02-01-15 113 800-888-8061

BTEX Profile Benzene, Ethyl Benzene, Toluene, Xylene, Total Hydro-carbons as Hexane


5 - 15 Liters 0.05 - 0.2 LPM

NIOSH 1501

GC/FID $121.00

3M 3500/3520, SKC 575-001, Assay N521

8 hours Max. Various NIOSH 1501M

GC/FID $121.00

Chlorinated Pesticide Profile

Aldrin, alpha-BHC, beta-BHC, gamma-BHC (Lindane), alpha-Chlordane, gamma-Chlordane, 4,4-DDD, 4,4-DDE, 4,4-DDT, Dieldrin, Endosulfan I, Endosulfan II, Endosulfan Sulfate, Endrin, Heptachlor, Heptachlor Epoxide, Methoxychlor

OVS 226-30-16 or ORBO 49P

60 - 1000 Liters 1 LPM OSHA 67M

GC/ECD $396.00

Diisocyanate Profile

HDI, MDI, 2,4-TDI, 2,6-TDI, IPDI Coated GFF (2 PP)

15 - 240 Liters 0.2 - 1.0 LPM

OSHA Methods 42 & 47

HPLC/FL $215.00

Sample open faced. Store unused media cold. Specify whether testing is for 4,4’-MDI or 2,4’-MDI (2,2’-MDI, CAS 2536-05-20, is not currently available)]. Media has 2-month shelf life (stored cold). OSHA National Emphasis Program specifies field desorption immediately after sampling; the K-20 kit includes C-14 cas-sette,V-04 vial with 3mL 90/10 (v/v) acetonitrile/dimethyl sulfoxide, tweezers(2), rack, instruction set, SDS for solution. Contact lab for more specifics.

Glycol Profile Butylene Glycol, Diethylene Glycol, Propylene Glycol, Triethylene Glycol, Ethylene Glycol

OVS tube SKC 226-57

5 – 60 Liters 0.5 – 2.0 LPM

NIOSH 5523

GC $110.00

Store samples cold, and ship samples cold overnight.

Inorganic Acid Profile

Hydrobromic Acid, Hydrochloric Acid, Hydrofluoric Acid, Nitric Acid, Phosphoric Acid, Sulfuric Acid

SKC 226-10-03 100 Liters 0.3 LPM Max.

NIOSH 7903

IC $198.00

K-08, Whatman SmearTab kit.

100 cm2 or 1 ft2 - - NIOSH 7903M

IC $198.00

Non-Viable Airborne Particulate Profile

Non-Viable Fungal Spore Count plus ID of: Glass Fibers, Cellulosic Fibers, Insect parts, Pollen, Animal Hair, Fly Ash, Quartz/Sand, Synthetic Fibers, Asbestos, Calcite, Plant Fibers, Other Fibers/Particles

Zefon Sampling Cassette (Air-O-Cell cassette)

150 Liters 15 LPM Call for Pricing



V02-01-15 114 800-888-8061

Organic Solvent Profile

Acetone, Benzene, Butyl Acetate, Chlorobenzene, Cyclohexanone, Decane, 1,2-Dichloroethane, 1,4-Diox-ane, Ethyl Acetate, Ethyl Benzene, Heptane, Hexane, Isooctane, Methyl Ethyl Ketone, Methyl Isobutyl Ketone, Methylene Chloride, m-Xylene, n-Propyl Acetate, Oc-tane, Pentane, Perchloroethylene, Styrene, Tetrahydro-furan, THC as Hexane, Toluene, 1,1,1-Trichloroethane, Trichloroethylene, 1,2,4-Trimethylbenzene, o-Xylene, p-Xylene


3 – 10 Liters 0.02 - 0.1 LPM

OSHA 7M

GC/FID $187.00

3M 3500/3520, SKC 575-001

8 hours Max. (sampler

capacity may be exceeded

for more volatile compounds in

higher concentration atmospheres)

Various NIOSH 1501M

GC/FID $187.00

For optimum results keep samples cold and ship cold by overnight delivery (for ketone compounds).

Polynuclear Aromatic Hydrocarbons

Acenaphthene, Acenaphthylene, Anthracene, Benzo(k)fluoranthene, Benzo(g,h,i)perylene, Benzo(a)pyrene, Benz(a)anthracene, Benzo(b)fluoranthene, Chrysene, Dibenz(a,h)anthracene, Fluoranthene, Fluorene, Indeno(1,2,3-cd)pyrene, Naphthalene, Phenanthrene, Pyrene

PTFE Filter and Orbo 43 or XAD-2

200 - 1000 Liters 2.0 LPM NIOSH 5506

HPLC/UV & FL

$270.00

Transfer filter to glass vial immediately after sampling, and wrap the vial and tube with aluminum foil to protect from light. Ship samples cold for overnight delivery. Profile includes Acenaphthene, Acenaphthylene, Anthracene, Benzo(k)fluoranthene, Benzo(g,h,i)perylene, Benzo(a)pyrene, Benz(a)anthracene, Benzo(b)fluoran-thene, Chrysene, Dibenz(a,h)anthracene, Fluoranthene, Fluorene, Indeno(1,2,3-cd)pyrene, Naphthalene, Phenanthrene, Pyrene.

Selected Polynuclear Aromatic Hydrocarbons

Anthracene, Benzo(a)pyrene, Chrysene, Phenanthrene, Pyrene

GFF 960 Liters 2.0 LPM OSHA 58 HPLC/UV & FL

$215.00

Transfer filters to glass vials after sampling and wrap with aluminum foil to protect from light. Ship samples by overnight delivery.

Solder Operations Profile

Antimony, Beryllium, Cadmium, Copper, Lead, Silver, Tin, Zinc Oxide

0.8µ MCEF 480 Liters, 960 if silver is determined at

TLV

1.0-2.0 LPM

OSHA ID-206

ICP $121.00



V02-01-15 115 800-888-8061

Toxic Metal Profile

Arsenic, Beryllium, Cadmium, Chromium, Lead, Vanadium

0.8µ 37mm MCEF

400 Liters 1.0 – 3.0 LPM

NIOSH 7300M

ICP $121.00

Welding Fume Metals Profile – Air

Aluminum, Antimony, Beryllium, Cadmium, Chromium, Cobalt, Copper, Iron, Lead, Manganese, Molybdenum, Nickel, Titanium, Vanadium, Zinc and Total Particulates.

0.8µm MCEF, C-04 (includes gravimetric analysis) or C-05 (no gravimetric analysis)

200 Liters, 480 Liters needed to allow detection of Cadmium at OSHA action

level

1.0-2.0 LPM

OSHA ID-125G

ICP $187.00

Welding Fume Metals Profile – Bulk

Aluminum, Antimony, Beryllium, Cadmium, Chromium, Cobalt, Copper, Iron, Lead, Manganese, Molybdenum, Nickel, Titanium, Vanadium, Zinc

Approximately 2 grams into a plastic vial or bag

N/A N/A OSHA ID-125G

ICP $215.00

Welding Fume Metals Profile – Wipe

Aluminum, Antimony, Beryllium, Cadmium, Chromium, Cobalt, Copper, Iron, Lead, Manganese, Molybdenum, Nickel, Titanium, Vanadium, Zinc

“Ghost” wipe. Place into a glass or plastic vial after sampling.

100 cm2 or 1 ft2 N/A OSHA ID-125G

ICP $215.00



V02-01-15 116 800-888-8061 V02-25-13 Page 137 800-888-8061

2.4 MediaTable

Part Number Media Description Unit of

Measure Price ($) CASSETTES

C-01 MCEF, 25mm, 0.8um, 3PC, long cowl, C-01 EACH $ -

C-02 MCEF, 25mm, 0.45um, 3PC, long cowl, C-02 EACH $ -

C-03 MCEF, 37mm, 0.45um, 3PC, C-03 EACH $ -

C-04 MCEF, 37mm, 0.8um, 3PC, Matched-weight, C-04 EACH $ 5.00

C-05 MCEF, 37mm, 0.8um, 3PC, C-05 EACH $ - C-06 GFF, 37mm, 1um, 3PC, C-06 EACH $ - C-07 GFF, 37mm, 1um, 2PC, C-07 EACH $ 7.00 C-08 PTFE, 37mm, 2um, 3PC, C-08 EACH $ -

C-09 PTFE, Preweighed, 37mm, 2um, 3PC, C-09 EACH $ 5.00

C-10 PVC, 37mm, 5um, 3PC, C-10 EACH $ -

C-11 PVC, Preweighed, 37mm, 5um, 2PC, C-11 EACH $ 5.00

C-12 PVC, Preweighed, 37mm, 5um, 3PC, C-12 EACH $ 5.00

C-13 MCE/Treated Backup, 37mm, 3PC, C-13 EACH $ 4.00 C-14 GFF, 2PP-treated, 37mm, 3PC, C-14 EACH $ 7.00

C-15 GFFs (2), H2SO4-treated, 37mm, 3PC, C-15 EACH $ -

C-16 Ag/PTFE, Cl2 / Br2 Sampler, 25mm, 3PC, C-16 EACH $ 10.00

C-17 GFF, Preweighed, 1um, C-17 EACH $ 5.00

C-18 MCEF/Treated Backup, 37mm, 3PC, C-18 EACH $ 4.00

C-19 PTFE, Preweighed, 25mm, 0.5um, C-19 EACH $ 5.00

C-20 GFFs(2), DNPH-treated, 37mm, 4PC, C-20 EACH $ 80.00

C-21 PTFE, 25mm, 0.45um, 2PC, C-21 EACH $ -

C-22 GFFs (2), nitrite-treated, 37mm, 2PC, C-22 BOX $ 80.00

C-23 Air-O-Cell Cassette, C-23 EACH $ 14.00 C-24 Supor Cassette, C-24 EACH -

2.4 MediaTable

Part Number Media DescriptionUnit of

Measure

Price ($) CASSETTESC-01 MCEF, 25mm, 0.8um, 3PC, long cowl, C-01 EACH *NC C-02 MCEF, 25mm, 0.45um, 3PC, long cowl,

C-02EACH *NC

C-03 MCEF, 37mm, 0.45um, 3PC, C-03 EACH *NCC-04 MCEF, 37mm, 0.8um, 3PC, Matched-

weight, C-04EACH $5.00

C-05 MCEF, 37mm, 0.8um, 3PC, C-05 EACH *NCC-06 GFF, 37mm, 1um, 3PC, C-06 EACH *NCC-07 GFF, 13mm, 1um, 2PC Swinnex, C-07 EACH $7.00 C-08 PTFE, 37mm, 2um, 3PC, C-08 EACH *NCC-09 PTFE, Preweighed, 37mm, 2um, 2PC,

Serialized, C-09EACH $5.00

C-10 PVC, 37mm, 5um, 3PC, C-10 EACH *NC C-11 PVC, Preweighed, 37mm, 5um, 2PC,


C-12 PVC, Preweighed, 37mm, 5um, 3PC, Serialized, C-12

EACH $5.00

C-13 MCE/Treated Backup, 37mm, 3PC, C-13 EACH $4.00 C-14 GFF, 2PP-treated, 37mm, 3PC, C-14 EACH $7.00 C-15 GFFs (2), H2SO4-treated, 37mm, 3PC,

C-15EACH *NC

C-16 Ag/PTFE, Cl2 / Br2 Sampler, 25mm, 3PC, C-16

EACH $10.00

C-18 MCEF/Treated Backup, 37mm, 3PC, C-18 EACH $4.00 C-19 PTFE, Preweighed, 25mm, 0.5um, C-19 EACH $5.00 C-20 GFFs(2), DNPH-treated, 37mm, 4PC, C-20 Box of 10 $99.00 C-21 PTFE, 25mm, 0.45um, 2PC, C-21 EACH *NCC-22 GFFs (2), nitrite-treated, 37mm, 2PC, C-22 Box of 10 $93.00 C-23 Air-O-Cell Cassette, C-23 EACH $14.00 C-25 MCE/Na2CO3-treated filter, 37mm, 4PC,

C-25EACH $6.00

C-26 PVC, Preweighed, 25mm, 5um, 2PC, Serialized, C-26

EACH $5.00

Prices on media Subject to change. *NC = Media cost included in price of the analysis

V02-01-15 117 800-888-8061


Measure

Price ($) CASSETTESC-27 MCEF, 25mm, 0.8um, 3PC, C-27 EACH *NC C-28 GFFs (2), amine-treated, 37mm, 4PC, C-28 EACH $5.00 C-29 PTFE, 25mm, 0.5um, 3PC long cowl,

PPBU, C-29EACH $5.00

C-30 PVC, Preweighed, 5um, 47mm, (Anaslide), Serialized, C-30

EACH $15.00

C-31 IOM Cassette, plastic, SKC PN 225-71A EACH $20.00 C-32 IOM Wash&Load, PVC, 5um, 25mm EACH $10.00 C-33 IOM Wash&Load, MCE, 0.8um, 25mm EACH $10.00 C-35 IOM Sampler & Cassette, SKC PN 225-70A EACH $110.00 C-39 PTFE, Preweighed, 2um, 37mm (Anaslide),


C-40 PEM Sampler PTFE, Preweighed, 2um(A-naslide), Serialized, C-40

EACH $10.00

C-41 PVC, 25mm, 5um, 2PC, C-41 EACH *NC C-42 PVC, prewashed 37mm, 5um, 2PC, C-42 EACH $6.00 C-43 Quartz, NaOH-treated, 37mm, 2PC, C-43 EACH $6.00 C-44 GFF Type A/B, 37mm, 1um, 3PC, C-44 EACH *NC C-45 PTFE 13mm Swinnex, 0.5um, C-45 EACH $7.00 C-46 PTFE, 37mm, 2um + support spacer, 2PC,

C-46EACH $4.00

C-47 Quartz, heat-treated, 37mm, 3PC, SKC PN 225-401

EACH $8.50

C-48 GFF, Hg Acetate-Treated, 37mm, 2PC, SKC PN 225-9007 or equiv.(provided by subcontract lab)

EACH *NC

C-49 GFF (2 in series), 2PP-treated, 37mm, 4PC, C-49

EACH $5.00

C-50 MCEF Prefilter, 37mm, 0.8um, 2PC, PPBU EACH *NC C-51 GFF, HBr Treated, 37mm, 2PC, C-51 EACH $10.00 C-52 IOM Cassette Preweight, PVC, 5um, 25mm EACH $10.00 C-53 PVC, 37mm, 5um, Quartz support, 2PC,

C-53EACH *NC

C-54 PVC,Preweighed,5um, 25mm, in Anaslide filter holder, Serialized, C-54

EACH $10.00

C-55 GFF, Sulfur-treated (ST-GFF), 37mm, 2PC, C-54

EACH $15.00

C-56 GFFs(2), 37mm, 4PC, C-56 EACH *NC


V02-01-15 118 800-888-8061


Measure

Price ($) CASSETTESC-57 PRE-RINSED 37mmGFF EACHC-58 IOM WASH & LOAD W/GFF EACH $10.00 C-59 PTFE,1um,25mm,2PC conductive goblet,

[SKC 225-1725]EACH $6.50

C-61 PVC,5um,37mm,Preweighed,over 0.8um MCE filter,2-PC, C-61

EACH $5.00

C-62 PTFE,2um,25mm,3PC conductive go-blet,[SKC MRK-005] MERCK-ONLY PART

EACH *NC

C-63 PVC ACCU-CAP,Preweighed,5.0um, 37mm,2PC,Serialized, C-63

EACH $10.00

C-64 GFFs (2), veratrylamine-treated, 25mm in IOM, C-64

Each $30.00

C-65 PTFE, Pre-weighed, 47mm, 2um, PMP support ring, in Anaslide, Serialized, C-65

Each $10.00

C-66 PTFE, 1um, 37mm, 2PC, C-66 Each -- C-9018 GFF/ HgCl2-treated Polyester, 37mm, 3PC,

SKC PN 225-9018Box of 10 $170.00

C-MCE-NN MCE, Low Metals, 37mm, 0.8um, 2PC, C-MCE-NN

EACH $3.00

X-12 Hi-Vol GFF, 8”x10”, 1um EACH *NC X-13 Hi-Vol GFF, Preweighed, 8”x10”, 1um,

SerializedEACH $5.00

IMPINGER SOLUTIONSIMP-01 Impinger, 0.1N KOH MLS *NCIMP-02 Impinger, 1% Sodium Bisulfite MLS *NC IMP-03 Isocyanate Train, MAMA Impinger/Filter SET $22.00 IMP-04 Impinger, 0.02% KI in NaHCO3/Na2CO3 MLS *NC IMP-05 Impinger, 0.01N NaOH MLS *NC IMP-06 MFGB, 0.1N KOH MLS *NC IMP-07 MFGB, Methanol MLS *NC IMP-08 Impinger, 0.1N NH4F MLS *NC IMP-09 Impinger, NaHCO3/Na2CO3 MLS *NC IMP-10 Impinger, Isopropanol MLS *NCIMP-11 Impinger, DI Water MLS *NCIMP-12 MFGB, 15 mL 0.1N KOH + 5um PVC

prefilter cassette + vialSET *NC

IMP-13 Impinger, TiOSO4 reagent MLS *NCPrices on media Subject to change. *NC = Media cost included in price of the analysis

V02-01-15 119 800-888-8061


Measure

Price ($) CASSETTESIMP-14 MFGB, DI Water MLS *NCIMP-15 MFGB, 0.01N KOH MLS *NC IMP-16 MFGB, Isopropanol MLS *NC

BOTTLES/VIALS1OZUP 1 oz Nalgene, Unpreserved EACH *NC 15UG 15ml Clear Glass Unpreserved EACH *NC 40UG 40ml Clear Glass Unpreserved EACH *NC V-02 2 mL glass vial, teflon-lined cap, Unpreserved EACH *NC V-04 4 mL glass vial, teflon-lined cap, Unpreserved EACH *NC V-15 15 mL glass vial, teflon-lined cap,

UnpreservedEACH *NC

V-40 40 mL glass vial, teflon-lined cap, Unpreserved

EACH *NC

SAMPLING KITS, AIR & WIPES & BAGS – IHK-01 Dialysis water sampling kit *NC K-02 Swinnex GFF+ 226-39 SET $7.00 K-03 LAL water sampling kit EACH *NC K-04 Low SO4 Charcoal, Orbo 34 (LG) SET $7.00 K-05 KOH-treated Anasorb 747, 226-80 + PTFE

Pre-filterEACH $7.00

K-06 PTFE + ORBO 43 EACH $8.00 K-07 Ghost Wipe Kit EACH *NC K-08 Whatman SmearTab Kit EACH *NC K-09 Impinger, 0.1N KOH EACH $5.00 K-10 Swinnex GFF + 226-10 EACH $7.00 K-11 Swinnex PTFE + 226-30-04 EACH $7.00 K-12 Methanol-moistened cotton-fabric swab EACH $5.00 K-13 C-15 (H2SO4 Treated GFF) plus 2 vials

with 2 ml DI water for field transfer.EACH $6.00

K-19 Texwipe 714A swabs(2)+16mL plastic screw-cap tube

EACH *NC

K-20 OSHA Isocyanate Kit, Field Desorption Each $10.00 X-01 Paper filter, 7cm EACH *NC


V02-01-15 120 800-888-8061


Measure

Price ($) CASSETTESX-10 1L Tedlar Bag EACH $15.00 X-11 Ghost Wipe Only EACH *NC X-19 1L Foil bag EACH $17.00 X-20 5L Tedlar Bag EACH $25.00 X-PCB Paper filter, 7cm, hexane-wetted EACH *NC

DIFFUSIVE SAMPLERS – BADGESM-01 SKC POVM, 575-001 EACH $15.00 M-02 SKC POVM, 575-002 EACH $17.00 M-03 SKC Mercury PM, SKC PN 520-02A EACH $8.00 M-03-A SKC Mercury PM Holder for 520-02A EACH $35.00 M-04 SKC Formaldehyde PEL PM, 526-200 EACH Not Available M-05 SKC Formaldehyde STEL PM, 526-201 EACH Not Available M-06 SKC Ethylene Oxide PM, 575-005 EACH $24.00 M-3500 3M POVM 3500 EACH $15.00 M-3500-C 3M POVM 3500, Case of 50 CASE of 50 $740.00 M-3520 3M POVM 3520, 2-stage EACH $18.00 M-3520-C 3M POVM 3520, 2-stage, Case of 50 CASE of 50 $870.00 M-3721 3M Formaldehyde PM 3721 EACH $26.00 M-3721-C 3M Formaldehyde PM 3721, Case of 5 CASE of 5 $125.00 M-N521 Assay N521 TraceAir POVM EACH $15.00 M-ATN571 Assay Aldehyde PM ATN571 EACH $18.00 M-N584 Assay Ammonia PM ATN584 EACH $16.00 M-N586 Assay Ozone PM N586, Case CASE of 10 $200.00 UMEX-100 SKC UMEX Aldehyde PM 500-100 EACH $15.00 UMEX-200 SKC UMEX SO2&NO2 PM 500-200 EACH $17.00 UMEX-400 SKC UMEX Amine PM 500-400 EACH $18.00

TUBES – IHO-23 Supelpak 20N, ORBO 23 EACH *NC O-24 Supelpak 20N, ORBO 24 EACH *NC O-34 Low Sulfate charcoal, ORBO 34 EACH *NC O-43 Supelpak 20U, ORBO 43 EACH *NC O-44 Supelpak 20E, ORBO 44 EACH *NC O-49 Supelpak 20P, ORBO 49P EACH $14.00


V02-01-15 121 800-888-8061


Measure

Price ($) CASSETTESO-53 Specially-cleaned silica gel, ORBO 53 EACH *NCO-90 Carbonxen 564, ORBO 90 EACH *NC O-91 Carbosieve S-III,Orbo 91 EACH *NC O-92 Carbonxen 564, ORBO 92 EACH *NC O-304 Low-Nickel charcoal, ORBO 304 EACH $1.00 O-306 Petroleum Charcoal, ORBO 306 EACH *NC O-202580 Specially Cleaned XAD-2, O-202580 EACH *NC T-00-IAQ Thermal Desorption Tube, Multi-bed EACH $25.00 T-01 Charcoal, 226-01 EACH *NC T-09 Charcoal, 226-09 EACH *NC T-10 Silica Gel, 226-10 EACH *NC T-10-03 Prewashed Silica Gel, 226-10-03 EACH *NC T-10-04 Silica Gel, 226-10-04 EACH *NC T-10-06 H2SO4-Treated Silica Gel, 226-10-06 EACH *NC T-15 Silica Gel, 226-15 EACH $1.00 T-16 Charcoal, 226-16 EACH $3.00 T-17-1A Anasorb C300, 226-17-1A EACH *NC T-28 Soda Lime, 226-28 EACH $5.00 T-29 Anasorb 747, 226-29 EACH $2.00 T-30 XAD-2 Tube, 226-30 EACH *NCT-30-04 XAD-2, 226-30-04 EACH $2.00 T-30-06 XAD-2, 226-30-06 EACH $2.00 T-30-07 XAD-2, 226-30-07 EACH $12.00 T-30-08 Anasorb 708, 226-30-08 EACH $2.00 T-30-16 GFF/XAD-2 OVS, 226-30-16 EACH $15.00 T-30-18 NITC-Treated XAD-2, 226-30-18 EACH $3.00 T-35-01 Tenax, 226-35-01 EACH $3.00 T-35-03 Tenax, 226-35-03 EACH $7.00 T-39 Florisil, 226-39 EACH $1.00 T-40 TEA-treated Molecular Seive(2 tubes), with

Oxidizer tube, 226-40EACH $12.00

T-40-02 TEA-treated Molecular Seive, 226-40-02 EACH $1.00 T-42-02 H2SO4-treated Firebrick, 226-42-02 EACH $1.00 T-44 Drying Tube, 226-44 EACH *NCT-47-01 Silica Gel, 226-47-01 EACH *NCT-49-108 Chromosorb 108, 226-49-108 EACH $2.00 T-54 HMP-treated XAD-2, 226-54 EACH $7.00


V02-01-15 122 800-888-8061


Measure

Price ($) CASSETTEST-56 GFF/Tenax OVS, 226-56 EACH $20.00 T-57 GFF/XAD-7 OVS, 226-57 EACH $15.00T-58 GFF/XAD-2 OVS, 226-58 EACH $15.00 T-59-04 Porapak R, 226-59-04 EACH $3.00T-67 KOH-treated Charcoal, 226-67 EACH $7.00 T-73 TBC-Treated charcoal, 226-73 EACH $1.00 T-80 KOH-treated Anasorb 747, 226-80 EACH $2.00 T-81 Anasorb 747, 226-81A EACH $2.00 T-82 Anasorb 747, 226-82, (2 in series) EACH $2.00 T-83 Anasorb 747, 226-83 EACH $12.00 T-89 TCP-treated XAD-4, 226-89 EACH $2.00 T-93 XAD-4, 226-93 EACH $1.00 T-94 XAD-7, 226-94 EACH *NCT-95 XAD-7, 226-95 EACH *NCT-96 NBD-chloride-treated XAD-7, 226-96 EACH $2.00 T-97 XAD-7 (3 Tubes, PCP Sampler), 226-97 EACH $10.00 T-98 H3PO4-treated XAD-7, 226-98 EACH *NC T-99 GFF/Silica Gel OVS, 226-99 EACH $15.00 T-107 Chromosorb 102, 226-107 EACH $5.00 T-110 Chromosorb 106, 226-110 EACH $3.00 T-111 Chromosorb 106, 226-111 SET $40.00 T-114 Porapak-P, 226-114 EACH *NC T-115 Porapak-Q, 226-115 EACH *NC T-116 Porapak-T, 226-116 EACH *NC T-117 HMP XAD-2, 226-117 EACH *NC T-119 DNPH-Treated Silica Gel, 226-119 EACH $2.00 T-120 DNPH-Treated Silica Gel, 226-120, with

ozone scrubberEACH $12.00

T-121 Anasorb CMS, 226-121 EACH *NC T-142 KOH-treated carbon beads, OVS-type with

PTFE pre-filter, 226-142EACH $32.00

T-151 Oxidizer-Treated Charcoal, 226-151 EACH *NC T-153 Amine-treated XAD-2, 226-153 EACH $5.00 T-177 Silvered Silica Gel, 226-177 EACH $40.00 T-178 HBR-treated Anasorb 747, 226-178 PAIR $10.00 T-183 Silica Gel+GFF,washed/baked,226-183,

2 in seriesEACH $10.00


V02-01-15 123 800-888-8061

V02-25-13 Page 1 800-888-8061

III. Pharmaceutical Testing Services

Analytics works with pharmaceutical companies to first develop and then routinely monitor personal exposure and equipment clearance testing. These proprietary methods are developed by Analytics using similar OSHA/NIOSH methods and then adapting these existing methods to the unique nature of the active ingredients required for your company. The entire process is made simple by Analytics’ R&D Staff and only requires minimum input by your company to establish the Occupational Exposure Limit (OEL) and to provide a small portion of the active ingredient required for analysis. The protocol we develop can be used to analyze air exposure samples, as well as samples for wipe clearance and bulk material testing. Analytics also provides containment testing of your entire production process based on the analysis of surrogates such as lactose, naproxen, acetaminophen, and mannitol. Analytics currently has over 200 proprietary and over-the-counter active pharmaceutical ingredients (API) that we analyze routinely.

Compound Media ng/ Sample

Method

5-Fluorouracil J 10 HPLC-UV Acetaminophen E, J 1000 HPLC-UV Acetylsalicylic acid E, J 2000 HPLC-UV Aciclovir E, J 9000 HPLC-UV Acitretin J 50 HPLC-UV Actinomycin D Wipe 100 HPLC-UV Amitriptylene E, J, A 100 HPLC-UV Amoxicillin E, J 100 HPLC-UV Amphotericin B J 400 HPLC-UV Anagrelide Hydrochloride N 70 HPLC-UV Atracurium besylate E, J 600 HPLC-UV Atropine Sulfate H 125 HPLC-UV Azothioprine I/Wipe 100/1000 HPLC-UV Bendamustine H/Wipe 100/1000 HPLC-UV Benzoate A 10 HPLC-UV Bromocriptine mesylate E 500 HPLC-UV Bupropion HCl E, J 400 HPLC-UV Butalbital E 2000 HPLC-UV Butoconazole Nitrate A 500 HPLC-UV Capsaicin J 20 HPLC-UV Capecitabine E, J 100 HPLC-UV Cefaclor Wipe 200 HPLC-UV Cefamandole Nafate Wipe 100 HPLC-UV Cefazolin Sodium Wipe 100 HPLC-UV Ceftazidime Wipe 100 HPLC-UV Ceftriaxone sodium N/A N/A HPLC-UV Cefuroxime Axetil Wipe 100 HPLC-UV Cefuroxime Sodium Wipe 200 HPLC-UV Cephalexin Wipe 100 HPLC-UV Cephalothin Wipe 300 HPLC-UV Chlordiazepoxide E, J 40 HPLC-UV Chlormadinone Acetate A 50 HPLC-UV Chlorohydrine A 1000 HPLC-UV Clenbuterol E, J 20 HPLC-UV Clidinium bromide E, J 2000 HPLC-UV Clobetasol propionate E, J 100 HPLC-UV Clonazepam E, J 200 HPLC-UV Clozapine base E 780 HPLC-UV Cyclophosphamide E, J, A 8000 HPLC-UV Cyclosporin A E 500 HPLC-UV


Method

Darifenacin F 125 HPLC-UV Desogestrel E 20 HPLC-UV Diatrizoic Acid E 156 HPLC-UV Digoxin N/Wipe 150 HPLC-UV Dihydrocapsaicin J 20 HPLC-UV Doxifl Uridine J 25 HPLC-UV Doxycline Hyclate F 500 HPLC-UV Ethinyl Estradiol E/Wipe 10/60 HPLC-FL Etretinate K 50 HPLC-UV Floxuridine J 50 HPLC-UV Flucytosine J 40 HPLC-UV Fludrocortisone Acetate H 10 HPLC-UV Flumethasone A 10 HPLC-UV Fluocinolone Acetonide A 20 HPLC-UV Fluocinonide A 20 HPLC-UV Fluorescein L 625 OD Fluorouracil (5-) E, J 100 HPLC-UV Flurazepam E, J 200 HPLC-UV Fluticasone Propionate E, J 2000 HPLC-UV Ganciclovir Sodium A 100 HPLC-UV Hydrazoic Acid M 50 (300) HPLC-UV Hydrocodone J 200 HPLC-UV Hydrocodone Bitartrate J 200 HPLC-UV Insulin F 2000 HPLC-UV Isotretinoin J 100 HPLC-UV Ketorolac Tromethamine A 100 HPLC-UV Labetalol E, J 1000 HPLC-UV Lactose A/ Wipe 2 IC Laidlomycin A 400 HPLC-UV Laidlomycin Propionate A 400 HPLC-UV Lamivudine E, J 1000 HPLC-UV Lansoprazole E 30 HPLC-UV Lasalocid E, J 800 HPLC-UV Levonorgestrel E 10 HPLC-UV Mannitol A/Wipe 1 IC Mestranol E, J 80 HPLC-UV Methamphetamine E, J 200 HPLC-UV Methylphenidate E, J 200 HPLC-UV Methylphenidate (dex-) E, J 200 HPLC-UV Mivacurium HCl E, J 800 HPLC-UV

V02-01-15 124 800-888-8061

V02-25-13 Page 2 800-888-8061


Method

Morphine Sulfate E, J 100 HPLC-UV Mycophenolate Mofetil A 200 HPLC-UV Nadolol E, J 10 HPLC-UV Naproxen A 2 HPLC-FL Naproxen Sodium A/Wipe 2 HPLC-FL Nicardipine Hydrochloride A 1000 HPLC-UV Norethindrone A 10 HPLC-UV Norethindrone Acetate E/Wipe 30 HPLC-UV Norgestimate E 10 HPLC-UV Orlistat B 1000 HPLC-UV Oseltamivir E, J 100 HPLC-UV Oxfendazole A 1000 HPLC-UV Oxytetracycline F 2500 HPLC-UV Pergolide Mesylate E 8.5 HPLC-FL Pilocarpine HCl E 600 HPLC-UV Prasterone (DHEA, dehydroepiandrosterone)

E 100 HPLC-UV

Procainamide HCl E, J 100 HPLC-UV Procarbazine Hydrochloride

J 100 HPLC-UV

Progesterone A 10 HPLC-UV Pyridostigmine Bromide E, J 200 HPLC-UV Ramoxifen Citrate G 200 HPLC-UV Ranitidine HCl J 400 HPLC-UV Ranolazine Free Base A 500 HPLC-UV Ranolazine Hydrochloride A 500 HPLC-UV Retinol O 100 HPLC-UV Ribavirin H 30 HPLC-UV Rifaximin E 17,000 HPLC-UV Salinomycin Sodium J 500 HPLC-UV Sertindole E 200 HPLC-UV Sumatriptan Succinate E, J 1000 HPLC-UV Temazepam E 500 HPLC-UV Testosterone Propionate A 10 HPLC-UV Tezacytabine (FMdC) J 20 HPLC-UV Thalidomide C 30 HPLC-UV Ticlopidine Hydrochloride A 200 HPLC-UV Tobramycin E 2000 HPLC-UV Tolcapone B 5000 HPLC-UV Trenbolone Acetate A 5 HPLC-UV Tretinoin, Vesanoid J 50 HPLC-UV Triamcinolone K 50 HPLC-UV Valaciclovir J 3000 HPLC-UV Verapamil J 200 HPLC-UV Vitamin D3 D 120 HPLC-UV Warfarin E 50 HPLC-UV Zalcitabine A 100 HPLC-UV Zidovudine E, J 3000 HPLC-UV Zopiclone E 38 HPLC-UV

Media Codes: A - 37 mm glass filter type A/E (1μm) and pad in polystyrene cassette B - 37 mm quartz filter (1μm) and pad in polystyrene cassette C - Two 37 mm quartz filters (1μm) in polystyrene cassette D - 37 mm Teflon filter (1μm) and pad in polycarbonate cassette E - 37 mm Teflon filter (1μm) and pad in polypropylene cassette F - 37 mm Teflon filter (1μm) and pad in 3-piece polypropylene cassette G - 37 mm Teflon filter (1μm) and glass fi lter type A/E as support pad in polypropylene cassette H - 25 mm Teflon filter (1μm) and pad in polypropylene cassette I - 37 mm Teflon filter (0.45μm) and pad in polypropylene cassette J - 37 mm Teflon filter (1μm) and pad in polystyrene cassette K - 37 mm Teflon filter (0.5μm) and pad in polystyrene cassette L - Two 37 mm quartz filters (1μm) in polypropylene cassette N - Two 37 mm glass filter type A/E (1μm) in polystyrene cassette O - 25 mm impregnated Teflon filter (1μm) in IOM cassette

V02-01-15 125 800-888-8061

V02-25-13 Page 1 800-888-8061

IV. Environmental Services and Fees

1. Introduction With more than twenty years of laboratory experience, Analytics continues its tradition of excellence in analytical services. By combining scientific expertise, state of the art instrumentation and leading edge information management systems, Analytics is committed to delivering to our clients the highest quality analytical laboratory service and data. From sample receipt to results delivery, remaining responsive to client needs is the center of our focus.

2. Standard Turnaround Time Analytics standard turnaround time for most environmental analyses is 5 business days from sample receipt in the laboratory. Emailed, faxed or verbal results are available by the close of business on the due date. A hard copy of the report will follow by mail.

3. Billing and Rush Multipliers Clients may request monthly billing or individual invoices by sample group. Billing by sample group is assumed unless otherwise requested. Billing terms are payable upon receipt. Acceptable forms of payment include check, money order, wire transfer, VisaTM, MasterCardTM, DiscoverTM or American ExpressTM. Samples requiring rush turnaround time must be scheduled prior to sample submission. The following charges will apply:

3 Day Turnaround Time 1.5 x price 2 Day Turnaround Time 1.75 x price 1 Day Turnaround Time 2.00 x price Same Day Turnaround Time 3.00 x price Weekend Analysis 3.00 x price + $300 Holiday Analysis 3.00 x price + $300

4. Deliverable Multipliers Unit prices are for a Level 1 data package. Analytics can provide Level 2, 3, CLP-like, and custom formats (see Section 9 for details of data package deliverable). The following charges apply to the data package requested:

Level 2 10% Level 3 15% CLP-Like 20% Custom Package Call for Pricing

5. Certifications Analytics seeks specific certifications as our business strategies require that we gain them. Our laboratory is certified by some of the most prestigious environmental oversight agencies including the National Environmental Laboratory Accreditation Conference (NELAC). We are currently approved as an environmental laboratory in conformance with the NELAC standards through the Commonwealth of Virginia for the following categories: Potable Water, Non-Potable Water and Solid and Hazardous Waste. Certification under the NELAC program provides for reciprocity to all NELAC authorized states, which includes FL, IL, KS, LA, MN, NH, NY, OR, PA, TX, and UT. A complete listing of our state and federal certifications can be found on our website at www.analyticscorp.com

6. Sample Containers/Shipping Kits We will provide and ship the appropriate sample supplies/containers by non-priority status to clients within the continental United States at no charge with one exception: Nitric acid preserved containers are classified as a hazardous shipment and appropriate charges will be applied. Clients requesting overnight delivery of supplies and those outside the continental U.S. will be invoiced for the associated charges when applicable. Due to the changes in shipping regulations, Nitric acid preserved sampling containers cannot be shipped overnight. It is the client’s responsibility to ensure proper sampling, packing, and return shipping to the laboratory under proper storage/preservation conditions.

V02-01-15 126 800-888-8061

V02-25-13 Page 2 800-888-8061

7. Sample Kit/Cooler Return Policy We will provide and ship (by non-priority status) the appropriate sample containers in a sample kit or cooler. We request that the kits/coolers be returned to us within 30 days. Please notify your Client Services Representative if you cannot meet this deadline. Clients will be billed for any unreturned kits/coolers, inserts, packing material, and bottles. The value of the kits and coolers ranges between $50 and $250.

8. Sample Kit/Cooler Temperatures When samples arrive at the laboratory, the temperature of each shipping container is measured and recorded. Samples should be packed such that they maintain a temperature range of 2-6°C during shipment. To ensure shipment at the proper temperature, we recommend using bags of ice rather than ice packs or artificial coolants. Guidance addressing temperature varies by state, regulatory program, and client-specific quality assurance plans.

9. Sample Collection and Preservation Guidelines Preservatives must be added in the field at the time of sample collection unless sample containers are pre-preserved. Preservatives should be recorded on the Chain-of-Custody (COC) form in the "Preservative" column on a per sample basis. For certain methods and parameters, the laboratory verifies upon receipt that the sample pH falls within an acceptable range. Improperly preserved samples or samples with pH values outside of the specified range are noted in the sample container receipt form. The client is contacted and given the option of re-sampling, directing the laboratory to preserve the sample in-house, or processing the sample as it was received, and recorded on the COC. When obtaining aqueous samples for the determination of volatile organics, the collector should ensure the absence of headspace by filling the 40-ml bottle to the top. This procedure should produce a positive meniscus across the surface of the vial. The Teflon-lined septum should be placed gently over the sample surface, with the Teflon side down, and the top screwed firmly on over the septum. A proper seal should be verified by inverting the sealed bottle and gently tapping on the sides with your finger, ensuring that no air bubbles appear. If applicable, the collector should designate which samples are to be used for Quality Control. For these designated samples, the recommended sample weight or volume should be doubled. If sufficient sample is not available to the laboratory, QC requirements may not be achievable. Excess sample will unnecessarily increase shipping costs.

Sampling and Shipping Guidelines: Bottles:

Do not open any bottles until you actually put your sample in them—this prevents contamination.

Do not substitute your own bottles or interchange any lids or labels on our bottles. Securely repack all bottles provided. Otherwise, bottle breakage may occur. Do not rinse bottles prior to sample collection. Rinsing will contaminate them and remove

preservative. Some states may require that non-preserved containers be rinsed with sample water before collection.

Ice/Blue Ice:

A wet ice slurry is ideal for sample collection and the use of blue ice is discouraged and not allowed by some state certifying bodies.

If you must use blue ice, freeze in a standard freezer for at least 12 hours and no more than 18 hours prior to sampling. Do not freeze the blue ice using dry ice. This freezes your sample and breaks bottles.

Do not freeze the sample itself. Please repack the blue ice with red caps upward. Otherwise, your sample results may not be

accurate or bottle breakage may occur during shipment.

Sample Records: Two types of labels will be supplied: a return shipping label and a sufficient number of

sample identification labels. On the sample identification labels, please complete all sections of the label to eliminate the possibility of samples being mixed up.

A Chain-of-Custody record and packing list are also provided.

••••

••

••

•

V02-01-15 127 800-888-8061

V02-25-13 Page 3 800-888-8061

Provide as much identifying information about your company on the COC, including your account number, as possible. Analytics processes thousands of samples a year—often from several plants of the same company, and very often on the same day!

10. How to Submit a Sample

1. Complete all the pertinent information on the chain of custody (COC) about your company and the project. Please include the state where the samples were collected. A COC can be found on our website at: http://analyticscorp.com/wp-content/uploads/2011/06/ENV-COC.pdf

a. Sample Identification: A unique sample description that will appear on the report. Date and time collected should always be recorded.

b. Grab or Composite: Indicate whether the sample is a grab (taken at one time from a single location) or a composite (taking multiple samples and combining them into one).

c. Matrix: Mark the type of sample and number of containers. If applicable, indicate whether the water is a groundwater, waste water, or drinking water.

d. Analyses Requested: Write the analysis name or abbreviation. Clearly indicate the analyses needed on every sample.

e. Preservative: Please indicate what preservative was used, if any. f. Turnaround Time: Indicate whether the samples are to be analyzed on a normal (5

working days) or rush basis. To assist the lab in scheduling, you can also include the date you need results. All rush work should be prescheduled. Also indicate if you would like preliminary results phoned, emailed or faxed to you, and include the number or email address.

g. Data Package Options: When a detailed data packaged is required, indicate the type of data package and if site QC is being submitted.

h. Relinquished by/Received by: Each time there is a change in the samples custody, this section must be signed by the person relinquishing and the person receiving the samples. Chain-of-custody seals for the sample containers and the outside of the package are available upon request.

2. Each sample bottle must be clearly labeled and cross-referenced on your chain of custody. 3. Samples which may present health hazards, such as those containing high levels of toxic

materials, MUST be clearly marked. 4. If accurate and detailed information is not available, it will delay sample processing and possibly

inhibit meeting your reporting date.

11. Reports and Deliverables Analytical reports convey to the client all of the information that is needed to evaluate the analytical results and draw conclusions about the levels those samples represent. Unless a specific format is requested, the standard laboratory procedure is to report Level 1 results to the limit of quantitation (LOQ). In many instances, it is possible to estimate to a value below the LOQ, if lower values are needed. These estimates are made to the method detection limit (MDL). Values reported below the LOQ are flagged with a “J” to indicate that the value is estimated. A typical Level 1 analytical report will include the following:

1. Laboratory name, address, telephone number, and certification/ID number 2. Client name and/or site name 3. Date and time of sample collection or pickup 4. Date and time of sample receipt, extraction, and analysis 5. Laboratory sample ID number 6. Customer sample ID number 7. Method reference (EPA, Standard Methods, etc.) 8. Sample type 9. Requested analytes 10. Analytical results with units of measurement 11. Reporting limits 12. Data qualifier code(s) if needed 13. Remarks about sample irregularities or problem in analysis 14. Initials of laboratory analyst, signature of lab director or designee

•

V02-01-15 128 800-888-8061

V02-25-13 Page 4 800-888-8061

Detailed data packages are also available, upon request, which document QA/QC in addition to the sample analyses for each batch of samples. For data package purposes, a batch is defined as the samples listed on a COC and is generally less than 20 field samples. If you request site-specific QA/QC samples, one sample in each batch must be submitted in triplicate in order to meet volume requirements. An additional charge for these samples will be incurred if less than 10 samples are submitted. If your data package does not require site-specific QC, you will not be charged for laboratory batch QC samples. The turnaround time for extended data packages is contingent upon the level of the data package. Analytics can provide our clients any report format since all laboratory data is stored and generated from a common database. In order to meet both regulatory agency and client requirements, we are constantly updating our data package formats. If you need additional modifications to the report formats listed below, please contact our customer service department or your project manager. A description of our most commonly requested reports are as follows: Organics Data Packages Data Requirements 1 2 3 4 EPA-CLP Equivalent Forms Case Narrative X X NA Cross Reference Sample ID/Client ID X X Cover Page Sample Result Summary X X X X 1A, 1B,C, 1D Surrogate Recovery X X X 2A, 2B, 2C, 2D, 2E, 2F Matrix Spike/Matrix Spike Duplicate Recovery X X X 3A, 3B, 3C, 3D, 3E Laboratory Control Sample X X X NA Method Blank Summary X X 4A, 4B, 4C Method Blank Results X X 1A, 1B,C, 1D Instrument Performance Check (Tune Report) X X 5A, 5B Initial Calibration Data X X 6A, 6B, 6C, 6D, 6E, 6F, 6G Continuing Calibration Check X X 7A, 7B, 7C, 7D, 7E Internal Standard Area and RT Summary X X 8A, 8B, 8C, 8D Raw Data X NA External Chain-of-Custody X X X X NA Internal Custody Tracking Documentation X NA Inorganics Data Packages Data Requirements 1 2 3 4 EPA-CLP Equivalent Forms Case Narrative X X NA Cross Reference Sample ID/Client ID X X Cover Page Sample Result Summary X X X X 1 Initial Calibration X X 2A Continuing Calibration Verification X X 2A Method Blank Results X X 3 ICP Interference Check Sample X X 4 Matrix Spike Sample Recovery X X X 5A, 5B Duplicates X X X 6 Laboratory Control Sample X X X 7 Raw Data X NA External Chain-of-Custody X X X X NA Internal Custody Tracking Documentation X X NA

X = Offered as part of QC Package

• Onl

* = Only offered if requested

V02-01-15 129 800-888-8061

V02-25-13 Page 5 800-888-8061

12. Alphabetical Listing of Methods Analytics is please to offer an extensive array of environmental analyses, including most EPA, RCRA, UST, TCLP, drinking water and wastewater methods. Specific analytical tests are listed in the following sections. Lists of tests are presented by an alphabetical list by analyte. Please note that for most testsAnalytics does not require a minimum sample fee. Volume discounts are available depending on thescope of your

project. Please contact our sales department or your project manager for details.

Each COC submitted is considered a Work Order (WO), therefore a separate report package is prepared for each COC submitted unless otherwise requested.

V02-01-15 130 800-888-8061

Analyte Name Method Matrix Container Preservation Holding TimeUnitPrice

Quantitation Limits (mg/L) Comments

Acidity SM2310BDrinking Water /

Water250 ml Plastic, no headspace

Cool < 6 ºC 14 days 5.00 $28

Alcohol Profile EPA 8015 Water 40 ml Vial Cool < 6 ºC 7 days 10.0 $99 Ethanol, Methanol, Isopropanol

Alcohol Profile EPA 8015Solid / Soil /

Waste4 oz Wide Mouth Jar

Cool < 6 ºC 14 days 10.0 mg/kg $99 Ethanol, Methanol, Isopropanol

Alkalinity SM2320BDrinking Water /


Cool < 6 ºC 14 days 5.00 $28

Alkalinity - Bicarbonate SM2320BDrinking Water /


Cool < 6 ºC 14 days 5.00 $28

Alkalinity - Carbonate SM2320BDrinking Water /


Cool < 6 ºC 14 days 5.00 $28

Alkalinity - Hydroxide SM2320BDrinking Water /


Cool < 6 ºC 14 days 5.00 $28

Aggressive Water Index Calculation Drinking Water250 ml Plastic, no headspace/

500mL

250 mL plastic unpreserved / 500mL plastic

HNO3

preserved

14 days N/A $28 Calculation based on Field pH, Alkalinity and Calcium Hardness

Ammonia-N SM4500NH3G Water 500 ml PlasticCool < 6 ºC;

H2SO428 days 0.10 $33

Anion Profile - inclusive (Br, Cl, F, NO2, NO3, PO4, SO4)

EPA 300.0Drinking Water /

Water125 ml Plastic Cool < 6 ºC

28 days - 48 hours for NO2, NO3,

o-Phos0.1 - 1.0 $121

Anion Profile - inclusive (Br, Cl, F, NO2, NO3, PO4, SO4)

EPA 300.0 Mod.Solid / Soil /

Waste8 oz Glass Jar Cool < 6 ºC

28 days - 48 hours for NO2, NO3,

o-Phos1.0-10.0 ug/g $121

BOD (Biochemical Oxygen Demand)

SM5210B Water 1 L Plastic Cool < 6 ºC 48 hours 2 $28

Bromide EPA 300.0Drinking Water /

Water125 ml Plastic Cool < 6 ºC 28 days 0.50 $39

Bromide EPA 300.0 Mod.Solid / Soil /

Waste8 oz Glass Jar Cool < 6 ºC 28 days 5.0 ug/g $39

Nominal limit for soils. Final Detection limit adjusted for sample weight and percent moisture

BTEX EPA 8021 Water (3) 40 mL VialsCool < 6 ºC,

HCl14 days preserved / 7 days unpreserved

1-5 ug/L $61

BTEX EPA 8021Solid / Soil /

Waste4 oz Glass jar Cool < 6 ºC 14 days 1.0 mg/Kg $61


V02-01-15 131 800-888-8061



BTEX + MTBE EPA 8021 Water (3) 40 mL VialsCool < 6 ºC,


1-5 ug/L $66

BTEX + MTBE EPA 8021Solid / Soil /



BTEX + MTBE + Naphthalene

EPA 8021 Water (3) 40 mL VialsCool < 6 ºC,


1-5 ug/L $66

BTEX + MTBE + Naphthalene

EPA 8021Solid / Soil /



Benzene, Toluene, Ethylbenzene



1-5 ug/L $61 Used for Discharge (Clean Water Act)

BTEX EPA 524.2 Drinking Water (3) 40 mL VialsCool < 6 ºC,

HCl, Ascorbic acid

14 days 2.0-5.0 ug/L $182

BTU ASTM D 240 Water 8 oz Glass Jar Cool < 6 ºC 28 days Call for limitsCall for pricing

BTU ASTM D 240Solid / Soil /

Waste8 oz Glass Jar Cool < 6 ºC 28 days Call for limits

Call for pricing

Carbon Call for Method Water Call for container, preservation, limits and pricing

Carbon Call for MethodSolid / Soil /

WasteCall for container, preservation, limits and pricing

Carbon Dioxide (CO2) SM4500CO2

Drinking Water / Water

250 ml Glass, No Headspace

Cool < 6 ºC Immediately 10.00 $44

CBOD (Carbonaceous Bio-chemical Oxygen Demand)

SM5210B Water 1L Plastic Cool < 6 ºC 48 Hours 2 $44

Chloride EPA 300.0Drinking Water /


Chloride EPA 300 Mod.Solid / Soil /


Chlorine, Residual SM4500ClGDrinking Water /

Water

250 ml Amber Glass, Zero Headspace


Chlorine, Free SM4500ClGDrinking Water /

Water

250 ml Amber Glass, Zero Headspace


V02-01-15 132 800-888-8061



COD (Chemical Oxygen Demand)

EPA 410.4 Water 250 ml PlasticCool < 6 ºC;

H2SO428 days 20.0 $28

Coliform - E. Coli, Presen-ce/Absence

SM9223B (Colisure) Drinking WaterSterile

Container

Cool < 10 ºC;Sodium

Thiosulfate30 Hours Present / Absent $55

Coliform - Fecal, (MPN) SM9221E WaterSterile

Container


Thiosulfate8 Hours 2 CFU/mL MPN $55

Coliform - Total, Presence/Absence

SM9223B Drinking WaterSterile

Container


Thiosulfate30 Hours Present / Absent $55

Color SM2120BDrinking Water /

Water125 ml Plastic Cool < 6 ºC 48 hours 5 CU $17

Conductivity SM2510B Drinking Water 125 ml Plastic Cool < 6 ºC 28 days N/A $17

Conductivity EPA 120.1 Water 125 ml Plastic Cool < 6 ºC 28 days N/A $17

Corrosivity (pH meter) SM4500H+B Water 125 ml Plastic Cool < 6 ºC Immediately N/A $17

Corrosivity (pH meter) EPA 9045CSolid / Soil /


Cool < 6 ºC Immediately N/A $17

Cyanide, Amenable SM4500CNGDrinking Water /

Water500 ml Plastic

Cool < 6 ºC NaOH

14 days 0.02 $44

Cyanide, Total SM4500CN C&EDrinking Water /

Water500 ml Plastic

Cool < 6 ºC NaOH

14 days 0.02 $44

Cyanide, Total EPA 9010C/9014Solid / Soil /


Cool < 6 ºC 14 days 1.00 mg/Kg $44

Density ASTM D1475 Waste / Oil / Pant8 oz Wide Mouth Jar

Cool < 6 ºC 7 days N/A $44

Dissolved Organc Carbon SM5310CDrinking Water /

Water250 ml Amber

GlassCool < 6 ºC

H2SO

4

28 Days 1.00 $44

Dissolved Organc Carbon EPA 9060A ModSolid / Soil /


Cool < 6 ºC 28 Days 10.0 mg/Kg $44

Diesel Range Organics (DRO)

EPA 8015 Water(2) 1 L Amber

GlassCool < 6 ºC 7 days 0.50 $72

Diesel Range Organics (DRO)



Cool < 6 ºC 14 days 10.0 mg/Kg $72 Nominal limit for soils. Final Detection limit adjusted for sample weight and percent moisture

EDB/DBCP EPA 8011 Water (3) 40 mL VialCool < 6 ºC;

HCl 14 days 0.05 ug/L $72

V02-01-15 133 800-888-8061



EndotoxinManufacturer Analytics SOP

ENVWC-023-LAL


Sterile / Pyrogen Free Plastic Tube

Cool < 6 ºC Not Specified 0.05 EU/mL $44

Ethylene Dibromide, 1,2-Di-bromo-3-chloropropane, 1,2,3-Trichloropropane

EPA 504.1 Drinking Water (3) 40 mL VialsCool < 6 ºC,

Na2S

2O

3

14 days 0.05 ug/L $66

Ethylene Glycol EPA 8015 Water 40 ml Vial Cool < 6 ºC 7 days 10.0 $99

Ethylene Glycol EPA 8015Solid / Soil /


Cool < 6 ºC 14 days 10.0 mg/kg $99 Nominal limit for soils. Final Detection limit adjusted for sample weight and percent moisture

Extractable Organic Halides (EOX)



Cool < 6 ºC 14 days Call for limitsCall for pricing

Flashpoint, Liquids by Closed Cup

ASTM D93 Water250 ml Amber

Glass, or plastic

Cool < 6 ºC 7 days > 75ºC $44

Flashpoint, Liquids by Closed Cup

ASTM D93Solid / Soil /



Fluoride EPA 300.0Drinking Water /


Fluoride EPA 300.0 Mod.Solid / Soil /


Formaldehyde EPA 8315 Water1 Liter Amber

GlassCool < 6 ºC 3 days 100 ug/L $198

Formaldehyde EPA 8315Solid / Soil /

Waste8 oz Glass Jar Cool < 6 ºC 14 days 0.100 mg/kg $198


Free Liquids EPA 9095A Water 8 oz jar Cool < 6 ºC 7 days + / - $44

Free Liquids EPA 9095ASolid / Soil /

Waste8 oz Glass Jar Cool < 6 ºC 7 days + / - $44

Fuels - Fingerprinting EPA 8015 Mod Water(2) 1 L Amber

GlassCool < 6 ºC 7 days N/A $127

Compared to in house Fuels. Reported as a distillation range comparison.

Fuels - Fingerprinting EPA 8015 ModSolid / Soil /

Waste8 oz Glass Jar Cool < 6 ºC 14 days N/A $127

Compared to in house Fuels. Reported as a distillation range comparison.

Gasoline Range Organics (GRO)



500 ug/L $61

V02-01-15 134 800-888-8061



Gasoline Range Organics (GRO)




Glycol Profile EPA 8015 Water 40 ml Vial Cool < 6 ºC 7 days 10.0 $99 Ethylene Glycol, Propylene Glycol, Diethylene Glycol, Dipropylene Glycol, Triethylene Glycol

Glycol Profile EPA 8015Solid / Soil /


Cool < 6 ºC 14 days 10.0 mg/kg $99 Nominal limit for soils. Final Detection limit adjusted for sample weight and percent moisture

Haloacetic Acids (HAA) EPA 552.2 Drinking Water Call for container, preservation, limits and pricing

Hardness SM2340C Drinking Water 250 ml Plastic HNO3

180 days 10.0 $28

Hardness EPA 200.7 Water 250 ml Plastic HNO3

180 days 0.05 $22

Herbicides - Chlorinated EPA 515 Drinking Water(2) 1 L Amber

GlassCool < 6 ºC 7 days Call for limits

Call for pricing

Herbicides - Chlorinated EPA 8151A Water(2) 1 L Amber


Herbicides - Chlorinated EPA 8151 Soil 8 oz Glass Jar Cool < 6 ºC 14 days Call for limitsCall for pricing

Heterotrophic Plate Count (HPC)


Container


Thiosulfate8 Hours 1 CFU/mL $55 HPC Agar 48 hour incubation

Heterotrophic Plate Count (HPC)


Container

Cool < 10 ºC ; Sodium

Thiosulfate8 Hours 1 CFU/mL $55 R2A Agar 7 day incubation

Hexavalent Chromium SM3500CrB Water 250 ml Plastic Cool < 6 ºC 24 hours 0.02 $55

Hexavalent Chromium SM3500CrB Water250 ml Plastic

pH 9.3-9.7Ammonium

Sulfate Buffer28 days 0.02 $55

Hydrazine ASTM D385 Water 500 ml Plastic Cool < 6 ºC 7 days Call for limitsCall for pricing

Hydrogen Sulfide SM4500S2H Water 500 ml Plastic Cool < 6 ºC 7 Days 2.00 $44 Calculation based on pH, Conduc-tivity and Total Sulfide

Ignitability by Closed Cup ASTM D93 Water250 ml Amber

Glass, or plastic


Ignitability by Closed Cup ASTM D93Solid / Soil /



V02-01-15 135 800-888-8061



LAL (Limulus Amebocyte Lysate)

Manufacturer Analytics SOP

ENVWC-023-LAL


Sterile / Pyrogen Free Plastic Tube

Cool < 6 ºC Not Specified 0.05 EU/mL $44

Langlier Saturation Index Calculation Drinking Water

250 ml Plastic, no headspace

/ 1000mL/ 500mL

250 mL plastic unpreserved

/1000mL plastic unpreserved

500mL plastic HNO

3

preserved

14 days N/A $28 Calculation based on Field Temperature, Field pH, Alkalinity, TDS and Calcium Hardness

Lead EPA 200.7 Water 500 ml Plastic HNO3

180 days 0.05 $22

Lead EPA 6010 Water 500 ml Plastic HNO3

180 days 0.05 $22

Lead EPA 6010Solid / Soil /


None 180 days 4 ug/g $22

Lead EPA 200.8 Drinking Water 500 ml Plastic HNO3

180 days 0.0025 $28

MBAS (Surfactants) SM5540CDrinking Water/

Water1000 ml plastic Cool < 6 ºC 48 hours 0.10 $72

Mercury EPA 245.2Drinking Water/

Water500 mL plastic HNO

328 days 0.0002 $33

Mercury EPA 7470 Water 500 mL plastic HNO3

28 days 0.0002 $33

Mercury EPA 7471Solid / Soil /

Waste4 oz Glass Jar HNO

328 days 0.025 mg/Kg $33

Metals - Appendix IX EPA 6010 / EPA 7470 Water 500 ml Plastic HNO3

6 months / Mercury-28 days

0.05; Hg 0.0005 $193

Antimony, Arsenic, Barium, Berylli-um, Cadmium, Chromium, Cobalt, Copper, Lead, Molybdenum, Nickel, Selenium, Silver, Thallium, Tin, Vanadium, Zinc, Mercury

Metals - Appendix IX EPA 6010 / EPA 7471Solid / Soil /

Waste4 oz Wide Mouth Jars

None6 months /

Mercury-28 days4 ug/g

Hg 0.025ug/g$193

Antimony, Arsenic, Barium, Berylli-um, Cadmium, Chromium, Cobalt, Copper, Lead, Molybdenum, Nickel, Selenium, Silver, Thallium, Tin, Vanadium, Zinc, Mercury

Metals - Priority Pollutant List (PPL)

EPA 200.7 / EPA 245.2

Water 500 ml Plastic HNO3

6 months / Mercu-ry-28 days

0.05; Hg 0.0002 $138

Antimony, Arsenic, Beryllium, Ca-dmium, Chromium, Copper, Lead, Nickel, Selenium, Silver, Thallium, Zinc, Mercury

V02-01-15 136 800-888-8061



Metals - Priority Pollutant List (PPL)

EPA 6010 / EPA 7471Solid / Soil /

Waste4 oz Glass Jar None


4 ug/g Hg 0.025ug/g

$138

Antimony, Arsenic, Beryllium, Ca-dmium, Chromium, Copper, Lead, Nickel, Selenium, Silver, Thallium, Zinc, Mercury

Metals - RCRA (8) EPA 6010 / EPA 7470 Water 500 ml Plastic HNO3


0.05; Hg 0.0005 $99 Arsenic, Barium, Cadmium, Chro-mium, Lead, Selenium, Silver, Mercury

Metals - RCRA (8) EPA 6010 / EPA 7471Solid / Soil /


None6 months /

Mercury-28 days4 ug/g

Hg 0.025ug/g$99

Arsenic, Barium, Cadmium, Chro-mium, Lead, Selenium, Silver, Mercury

Metals - Target Analyte List (TAL)

EPA 6010 / EPA 7470 Water 500 ml Plastic HNO3


0.05; Hg 0.0005 $193

Aluminum, Antimony, Arsenic, Barium, Beryllium, Cadmium, Calcium, Chromium, Cobalt, Copper, Iron, Lead, Magnesium, Manganese, Molybdenum, Nickel, Potassium, Selenium, Silver, Thal-lium, Vanadium, Zinc, Mercury

Metals - Target Analyte List (TAL)

EPA 6010 / EPA 7471Solid / Soil /

Waste4 oz Glass Jar None


4 ug/g Hg 0.025ug/g

$193

Aluminum, Antimony, Arsenic, Barium, Beryllium, Cadmium, Calcium, Chromium, Cobalt, Copper, Iron, Lead, Magnesium, Manganese, Molybdenum, Nickel, Potassium, Selenium, Silver, Thal-lium, Vanadium, Zinc, Mercury

Metals by ICP EPA 200.7Drinking Water /

Water500 ml Plastic HNO

36 months 0.05 - 0.25 $22 Individual Elements

Metals by ICP EPA 6010 Water 500 ml Plastic HNO3


Metals by ICP EPA 6010Solid / Soil /

Waste4 oz Glass Jar None 6 months 4 ug/g $22 Individual Elements

Metals by ICP/MS EPA 200.8Drinking Water /



Nitrate, as Nitrogen (NO3) EPA 300.0Drinking Water /

Water125 ml Plastic Cool < 6 ºC 48 hours 0.11 $44

Nitrate-Nitrite, as Nitrogen SM4500NO3FDrinking Water /


Nitrite, as Nitrogen EPA 300.0Drinking Water /


Nitrite, as Nitrogen SM4500NO2BDrinking Water /


V02-01-15 137 800-888-8061



Nitrogen, TotalEPA351.2 /

SM4500NO3FWater 250 ml Plastic

Cool < 6 ºC; H

2SO

4

28 days 0.25 $99 Sum of the Total Kjeldahl Nitrogen and Nitrate-Nitrite Analysis.

Oil and Grease -Total EPA 1664 Water(2) 1 L Amber

Glass Cool < 6 ºC;

HCL or H2SO

4

28 days 5.00 $77

Oil and Grease -TPH EPA 1664 Water(2) 1 L Amber

Glass Cool < 6 ºC;

HCL or H2SO

4

28 days 5.00 $88

Oil and Grease -AV EPA 1664 Water(2) 1 L Amber

Glass Cool < 6 ºC;

HCL or H2SO

4

28 days 5.00 $165 If requested individually, AV is determined from Total Oil & Grease - TPH Oil & Grease

Oxygen, Dissolved SM4500OGDrinking Water /

Water

250mL Amber Glass, Zero Headspace


PAHs - Polynuclear Aromatic Hydrocarbons

EPA 550 Drinking Water(2) 1 L Amber

Glass Cool < 6 ºC 7 days Call for limits

Call for pricing



Glass Cool < 6 ºC 7 days 20 ug/L $165

Used for Discharge (Clean Water Act)







Glass Cool < 6 ºC 7 days 10 ug/L $215




Cool < 6 ºC 14 days0.333 - 0.666

mg/Kg$215




Glass Cool < 6 ºC 7 days 0.2-2.0 ug/L $165




Cool < 6 ºC 14 days0.01 - 0.05 mg/

Kg$165


PCB (Polychlorinated Biphenyls)

EPA 508 Drinking Water(2) 1 L Amber

Glass Cool < 6 ºC 1 year Call for limits

Call for pricing



Glass Cool < 6 ºC 1 year 2.00 ug/L $83




Glass Cool < 6 ºC 1 year 1.00 ug/L $83


EPA 8082 Wipe8 oz Wide Mouth Jars

Cool < 6 ºC 1 year 2 ug/Wipe $83

V02-01-15 138 800-888-8061





Waste8 oz Glass Jar Cool < 6 ºC 1 year 0.500 mg/Kg $83



EPA 8082 Bulk / Caulk 4 oz Glass jar Cool < 6 ºC 1 year 0.500 mg/Kg $99


EPA 8082 Bulk / Caulk 4 oz Glass jar Cool < 6 ºC 1 year Call for limitsCall for pricing

EPA regions that require soxhlet extraction for the preparation procedure EPA 3540C.

Percent Ash ASTM D482Solid / Soil /

Waste4 oz Glass jar Cool < 6 ºC 14 days Call for limits

Call for pricing

Percent Moisture EPA 3550 Sec. 7.2 Soil 4 oz Glass jar Cool < 6 ºC 14 days 0.5% $11

Percent Solids EPA 3550 Sec. 7.2 Soil 4 oz Glass jar Cool < 6 ºC 14 days 0.5% $11

Percent Water (Karl Fischer)

ASTM D1744 Waste / Oil / Pant 4 oz Glass jar Cool < 6 ºC 14 days Call for limitsCall for pricing

Pesticides - Chlorinated EPA 508 Drinking Water(2) 1 L Amber

Glass Cool < 6 ºC 7 days Call for limits

Call for pricing

Pesticides - Chlorinated EPA 608 Water(2) 1 L Amber

Glass Cool < 6 ºC 7 days 0.1-10 ug/L $138


Pesticides - Chlorinated EPA 8081 Water(2) 1 L Amber

Glass Cool < 6 ºC 7 days 0.1-10 ug/L $138

Pesticides - Chlorinated EPA 8081Solid / Soil /

Waste8 oz Glass Jar Cool < 6 ºC 14 days 0.02 - 0.2 mg/Kg $138


pH SM4500H+BDrinking Water /

Water125 ml Plastic Cool < 6 ºC Immediately N/A $28

Phenol, Total (Phenolics) EPA 420.1 Water(2) 1 L Amber

Glass Cool < 6 ºC;

H2SO

4

28 days 0.005 - 0.05 $83

Phosphorate, Ortho (as Phosphorus)



Phosphorate, Ortho (as Phosphorus)



Phosphorus, Total EPA 365.3Drinking Water /

Water250 ml Plastic

Cool < 6 ºC; H

2SO

4

28 days 0.020 $44

Reactivity (Cyanides/ Sulfides)

EPA Chapter 7 Water 500 ml PlasticCool < 6 ºC;

NaOH7 days 200 $83

Reactivity (Cyanides/ Sulfides)

EPA Chapter 7Solid / Soil /

Waste8 oz Glass Jar Cool < 6 ºC 14 days 200 mg/Kg $83

V02-01-15 139 800-888-8061



Resistivity EPA 120.1 Water 125 ml Plastic Cool < 6 ºC 28 days N/A $17

Semivolatiles EPA 525 Drinking Water(2)1 L Amber

GlassCool < 6 ºC 7 days Call for limits

Call for pricing

Semivolatiles EPA 625 Water(2)1 L Amber

GlassCool < 6 ºC 7 days 20-40 ug/L $215


Semivolatiles EPA 8270 Water(2)1 L Amber

GlassCool < 6 ºC 7 days 10-40 ug/L $215

Semivolatiles EPA 8270Solid / Soil /


Cool < 6 ºC 14 days0.333 - 0.666

mg/Kg$215


Semivolatiles - Tentatively Identified Compounds (TICs) Library Search

EPA 625 /EPA 8270 N/A N/A N/A N/A N/A $44

If requested, TICs must be accompanied by a corresponding analysis, either EPA 625 or EPA 8270

Settleable Solids (SS) SM2540F Water 1 L Plastic Cool < 6 ºC 48 hours 0.10 mL/L $17

Silicates (Silica) EPA 200.7Drinking Water /


36 months 0.05 $44

Solids, Total (TS) SM2540BDrinking Water /

Water1 L Plastic Cool < 6 ºC 7 days 10.0 $17

Solids, Total (TS) SM2540G Solid / Sludge16 oz Glass

JarCool < 6 ºC 7 days 0.01 % $17

Solids, Total Dissolved (TDS)

SM2540CDrinking Water /

Water1 L Plastic Cool < 6 ºC 7 days 10.0 $17

Solids, Total Suspended (TSS)

SM2540D Water 1 L Plastic Cool < 6 ºC 7 days 1.00 $17

Solids, Total Fixed (TFS) SM2540E Water 1 L Plastic Cool < 6 ºC 7 days 1.00 % $17

Solids, Total Fixed (TFS) SM2540G Solid / Sludge16 oz Glass


Solids, Total Volatiles (TVS) SM2540E Water 1 L Plastic Cool < 6 ºC 7 days 1.00 % $17

Solids, Total Volatiles (TVS) SM2540G Solid / Sludge16 oz Glass


Specific Conductance SM2510B Drinking Water 125 ml Plastic Cool < 6 ºC 28 days N/A $17

Specific Conductance EPA 120.1 Water 125 ml Plastic Cool < 6 ºC 28 days N/A $17

Specific Gravity ASTM D1475 Waste / Oil / Pant8 oz Wide Mouth Jar

Cool < 6 ºC 7 days N/A $44

Sulfate EPA 300.0Drinking Water /


V02-01-15 140 800-888-8061



Sulfate EPA 300 Mod.Solid / Soil /


Sulfide SM4500S2FDrinking Water /

Water500 ml Plastic

Cool < 6 ºC; Zinc acetate plus NaOH

7 days 2.00 $28

Sulfite SM4500SO3BDrinking Water /

Water125 ml Plastic Cool < 6 ºC Immediately 2.00 $28

Sulfur EPA 200.7 Water 500 ml Plastic HNO3

180 days Call for limitsCall for pricing

Sulfur EPA 6010 Water 500 ml Plastic HNO3


Sulfur EPA 6010Solid / Soil /


None 180 days Call for limitsCall for pricing

Surfactants (MBAS) SM5540CDrinking Water /

Water1000 ml Plastic

Cool < 6 ºC 48 hours 0.10 $72

Suitability Call for Method Drinking Water Call for container, preservation, limits and pricing

TCLP Herbicides [excludes extractions]

EPA 8151 Water

(2) 1 Liter Amber Glass

w/Teflon Lined Cap

Cool < 6 ºC14 days to TCLP

Extraction0.05 $154

TCLP Herbicides [excludes extractions]


Waste

8 oz.Wide Mouth Glass

w/Teflon Lined Cap


Extraction0.05 $154

TCLP Metals [excludes extractions]

EPA 6010/7470 Water 500 ml Plastic Cool < 6 ºC6 months (Hg-28 days) to TCLP

Extraction0.5 - 10.0 $99

TCLP Metals [excludes extractions]

EPA 6010/7470Solid / Soil /


Cool < 6 ºC6 months (Hg-28 days) to TCLP

Extraction0.5 - 10.0 $99

TCLP Pesticides [excludes extractions]

EPA 8081 Water


w/Teflon Lined Cap


Extraction0.001 - 0.1 $138

TCLP Pesticides [excludes extractions]


Waste

8 oz. Glass w/Teflon Lined

CapCool < 6 ºC

14 days to TCLP Extraction

0.001 - 0.1 $138

V02-01-15 141 800-888-8061



TCLP Semivolatiles [excludes extractions]

EPA 8270 Water


w/Teflon Lined Cap


Extraction0.100 $215

TCLP Semivolatiles [excludes extractions]


Waste

8 oz. Glass w/Teflon Lined

CapCool < 6 ºC

14 days to TCLP Extraction

0.100 $215

TCLP Volatiles EPA 8260 Water (3) 40 mL Vials Cool < 6 ºC; 14 days 0.050 - 0.250 $138

TCLP- Volatiles (includes ZHE)

EPA 8260/ZHESolid / Soil /

Waste4 oz. Wide Mouth Jar

Cool < 6 ºC; 14 days to TCLP

Extraction0.050 - 0.250 $215

TCLP- Extraction only (non-VOA)

EPA 1311 N/A N/A N/A14 days; 6 months

Metals (Hg-28 days) to TCLP Extraction

N/A $66

Temperature (Field) SM2550B Various 125 ml Plastic N/A Immediately N/A $11 Field measurement only

THM (THM) EPA 524.2 Drinking Water (3) 40 mL VialsCool < 6 ºC,

HCl, Ascorbic acid

14 days 2.00 - 5.00 ug/L $182 Chloroform, Chlorodibromometh-ane, Dibromochloromethane, Bromoform

Total Trihalomethanes (TTHM)

EPA 524.2 Drinking Water (3) 40 mL VialsCool < 6 ºC,

HCl, Ascorbic acid

14 days 2.00 - 5.00 ug/L $182 Chloroform, Chlorodibromometh-ane, Dibromochloromethane, Bromoform

Total Haildes (TX) EPA 9020 Oil 4 oz Glass jar Cool < 6 ºC; 14 days Call for limitsCall for pricing

Total Kjeldahl Nitrogen (TKN)

EPA 351.2 Water 250 ml PlasticCool < 6 ºC;

H2SO

4

28 days 0.25 $44

Total NitrogenEPA351.2 /

SM4500NO3FWater 250 ml Plastic

Cool < 6 ºC H

2SO

4

28 days 0.25 $99 Sum of the Total Kjeldahl Nitrogen and Nitrate-Nitrite Analysis.

Total Organic Carbon (TOC) SM5310CDrinking Water /

Water250 ml Amber

GlassCool < 6 ºC;

H2SO

4

28 Days 1.00 $44

Total Organic Carbon (TOC) EPA 9060Solid / Soil /

Waste250 ml Amber

GlassCool < 6 ºC; 28 days 10.0 mg/kg $44

Total Organic Halides (TOX) EPA 9020 Water250 ml Amber

GlassCool < 6 ºC

H2SO

4


Toxicity - Acute Call for Container, Presevation and Pricing

Toxicity - Chronic Call for Container, Presevation and Pricing

TPH-DRO EPA 8015 Water(2) 1 L Amber


V02-01-15 142 800-888-8061



TPH-DRO EPA 8015Solid / Soil /



TPH-GRO EPA 8015 Water (3) 40 mL VialsCool < 6 ºC,


500 ug/L $61

TPH-GRO EPA 8015Solid / Soil /

Waste4 oz Glass Jar Cool < 6 ºC 14 days 10.0 mg/Kg $61


Turbidity EPA 180.1Drinking Water /

Water125 ml Plastic Cool < 6 ºC 48 hours 1 NTU $17

Viscosity ASTM D2196 Liquids Call for container, preservation, limits and pricing

Volatiles EPA 524.2 Drinking Water (3) 40 mL VialsCool < 6 ºC,

HCl, Ascorbic acid

14 days 2.00 - 5.00 ug/L $182

Volatiles EPA 624 Water (3) 40 mL Vials HCl 14 days 2-10 ug/L $138 Used for Discharge (Clean Water Act)

Volatiles EPA 8260 Water (3) 40 mL Vials HCl 14 days 1.00-10.0 ug/L $138

Volatiles EPA 8260Solid / Soil /

Waste4 oz Glass Jar Cool < 6 ºC 14 days

0.050 - 0.500mg/Kg

$138 Nominal limit for soils. Final Detection limit adjusted for sample weight and percent moisture

Volatiles - Aromatic (BTEX, MTBE, Naphthalene)



1-5 ug/L $66

Volatiles - Aromatic (BTEX, MTBE, Naphthalene)


Waste4 oz Glass Jar Cool < 6 ºC 14 days 1.0 mg/Kg $66


Volatiles - Tentatively Identified Compounds (TICs) Library Search

Various N/A N/A N/A N/A N/A $28

If requested, TICs must be accompanied by a corresponding analysis, either EPA 624 or EPA 8260

Volatile Suspended Solids (VSS)

SM2540E Water 1 L Plastic Cool < 6 ºC 7 days 1.00 $17

V02-01-15 143 800-888-8061



Profiles

TCL & TAL Pkg. - Full, (VOA, SVOA, Pest/PCB, Metals and Cn)

EPA 8260

Remediation/ Ground Water

(3) 40mL VOA Vials

Cool < 6 ºC; HCl

14 days 1.00 - 10.0 ug/L

$825

Volatiles

EPA 8270(2) 1 L Amber

GlassCool < 6 ºC 7 days 10.0 - 40.0 ug/L Semivolatiles


GlassCool < 6 ºC 7 days 0.100 - 2.00 ug/L Pesticides


GlassCool < 6 ºC 1 year 1.00 ug/L PCBs (Polychlorinated Biphenyls)

EPA 6010500 ml Plastic

Cool < 6 ºC HNO

3

6 months 0.05 - 0.5

Aluminum, Antimony, Arsenic, Barium, Beryllium, Cadmium, Calcium, Chromium, Cobalt, Copper, Iron, Lead, Magnesium, Manganese, Molybdenum, Nickel, Potassium, Selenium, Silver, Thallium, Vanadium, Zinc

EPA 7470 28 days 0.0005 Mercury

SM4500CN C&E 500 ml PlasticCool < 6 ºC

NaOH14 days 0.02 Cyanide

TCL & TAL Pkg. - Full, (VOA, SVOA, Pest/PCB, Metals and Cn)

EPA 8260

Solid / Soil / Waste

4 oz Glass Jar

Cool < 6 ºC

14 days 0.05 - 0.5 mg/Kg

$825

Volatiles

EPA 8270

(2) 8 oz Glass Jars

14 days0.333 - 0.666

mg/KgSemivolatiles

EPA 8081 14 days0.020 - 0.200

mg/KgPesticides

EPA 8082 1 year 0.500 mg/Kg PCBs (Polychlorinated Biphenyls)

EPA 6010 6 months 4.00 ug/g

Aluminum, Antimony, Arsenic, Barium, Beryllium, Cadmium, Calcium, Chromium, Cobalt, Copper, Iron, Lead, Magnesium, Manganese, Molybdenum, Nickel, Potassium, Selenium, Silver, Thallium, Vanadium, Zinc

EPA 7470 28 days 0.025 ug/g Mercury

SM4500CN C&E 14 days 1.00 mg/Kg Cyanide

V02-01-15 144 800-888-8061



TCLP - Full, (VOA, SVOA, Pest, Herb, Metals - includes extraction)

EPA 8260


4 oz Glass Jar

Cool < 6 ºC

14 days 0.05-0.25

$715 TCLP tumbling (leaching) procedure performed by EPA 1311

EPA 8270

(2) 8 oz Glass Jars

14 days 0.1

EPA 8081 14 days 0.001-0.010

EPA 8151 14 days 0.05

EPA 6010 6 months 0.100 - 10.0

EPA 7470 28 days 0.002

TCLP - Full, (VOA, SVOA, Pest, Herb, Metals includes extraction)

EPA 8260


(3) 40mL VOA Vials

Cool < 6 ºC 14 days 0.05-0.25

$715 TCLP tumbling (leaching) proce-dure performed by EPA 1311

EPA 82701 L Amber

GlassCool < 6 ºC 14 days 0.1

EPA 80811 L Amber

GlassCool < 6 ºC 14 days 0.001-0.010

EPA 81511 L Amber


EPA 6010 500 ml Plastic Cool < 6 ºC 6 months 0.100 - 10.0

EPA 7470 500 ml Plastic Cool < 6 ºC 28 days 0.002

TCLP - Full + RIC, (VOA, SVOA, Pest, Herb, Metals, Reactivity, Ignitability, Corro-sivity - includes extraction)

EPA 8260


4 oz Glass Jar

Cool < 6 ºC

14 days 0.05-0.25

$825 TCLP tumbling (leaching) proce-dure performed by EPA 1311

EPA 8270

(2) 8 oz Glass Jars

14 days 0.1

EPA 8081 14 days 0.001-0.010

EPA 8151 14 days 0.05

EPA 6010 6 months 0.100 - 10.0

EPA 7470 28 days 0.002

Chapter 7 14 days 200 mg/Kg

ASTM D93 14 days > 60ºC

EPA 9040C 14 days NA

V02-01-15 145 800-888-8061



TCLP - Full + RIC, (VOA, SVOA, Pest, Herb, Metals, Reactivity, Ignitability, Corro-sivity - includes extraction)

EPA 8260


(3) 40mL VOA Vials

Cool < 6 ºC 14 days 0.05-0.25

$825 TCLP tumbling (leaching) procedure performed by EPA 1311

EPA 82701 L Amber


EPA 80811 L Amber

GlassCool < 6 ºC 14 days 0.001-0.010

EPA 81511 L Amber


EPA 6010 500 ml Plastic Cool < 6 ºC 6 months 0.100 - 10.0

EPA 7470 500 ml Plastic Cool < 6 ºC 28 days 0.002

Chapter 7

500 ml Plastic Cool < 6 ºC

14 days 200

ASTM D93 14 days > 60ºC

EPA 9040C 14 days NA

Priority Pollutants - Full, (VOA, BNA, Pest/PCB, and Metals and CN)

EPA 624

Water

(3) 40mL VOA Vials

Cool < 6 ºC; HCl

14 days 2.00 - 10.0 ug/L

$660

Volatiles


GlassCool < 6 ºC 7 days 20.0 - 40.0 ug/L Semivolatiles


GlassCool < 6 ºC 7 days 0.100 - 2.00 ug/L Pesticides / PCBs

EPA 200.7500 ml Plastic

Cool < 6 ºC HNO

3

6 months 0.05 - 0.5 Metals

EPA 245.2 28 days 0.0002 Mercury

SM4500CN C& E 500 ml PlasticCool < 6 ºC


Total Toxic Organics (TTO)

EPA 624

Water

(3) 40mL VOA Vials

Cool < 6 ºC; HCl

14 days 0.002 - 0.010 $138

Total Toxic Organics generally includes EPA 624, 625 and 608; components are priced individually


GlassCool < 6 ºC 7 days 0.010 - 0.020 $215


GlassCool < 6 ºC 7 days 0.005 - 0.008 $138

Primary Inorganics (Safe Drinking Water Act)

EPA 200.8

Drinking Water

500 mL PlasticCool < 6 ºC

HNO3

6 months (28 days Hg)

0.0025 - 0.010

$281

Antimony, Arsenic, Barium, Beryllium, Cadmium, Chromium, Copper, Lead, Mercury, Selenium, Thallium

EPA 300.0 125mL Plastic Cool < 6 ºC 48 hours 0.100 - 0.226 Fluoride, Nitrate, Nitrite

SM4500CNC & E 500 mL PlasticCool < 6 ºC


V02-01-15 146 800-888-8061



Secondary Inorganics (Safe Drinking Water Act)

EPA 200.7

Drinking Water

500 mL PlasticCool < 6 ºC

HNO3

6 months 0.050

$231

Aluminum, Iron, Manganese, Silver, Zinc

SM2120B 500 mL Plastic Cool < 6 ºC 48 hours 5 CU Color

EPA 300.0 125mL Plastic Cool < 6 ºC 28 days 0.250 - 0.500 Chloride, Fluoride, Sulfate

SM5540C1000 ml Plastic

Cool < 6 ºC 48 hours 0.100 MBAS

SM4500H+B 125mL Plastic Cool < 6 ºC Immediately N/A pH

SM2540C1000 ml Plastic

Cool < 6 ºC 7 days 10.000 Total Dissolved Solids

Primary Metals Only (SDWA)

EPA 200.8 Drinking Water 500 mL PlasticCool < 6 ºC

HNO3

6 months (28 days Hg)

0.0025 - 0.010 $220

Antimony, Arsenic, Barium, Beryllium, Cadmium, Chromium, Copper, Lead, Mercury, Selenium, Thallium

Secondary Metals Only (SDWA)

EPA 200.7 Drinking Water 500 mL PlasticCool < 6 ºC

HNO3

6 months 0.050 $105 Aluminum, Iron, Manganese, Silver, Zinc

Hazardous Waste Profile A

EPA 8021


4 oz Glass Jar

Cool < 6 ºC

14 days 1.00 mg/Kg

$550

Benzene, Toluene, Ethylbenzene, Xylenes

EPA 9040C

(2) 16 oz Glass Jars

Immediately N/A Corrosivity

ASTM D93 14 days 75ºC Flashpoint

EPA 9095A 14 days N/A Free Liquids


EPA 3550 Sec 7.2 14 days N/A Percent Moisture

Chapter 7 14 days 200 mg/Kg Reactivity

EPA 6010 6 months 0.100 - 10.0 TCLP Metals: Arsenic, Barium, Cadmium, Chromium, Lead, Selenium

EPA 7470 28 days 0.002 TCLP Mercury

EPA 8015 14 days 10 mg/Kg Diesel Range Organics (DRO)

EPA 8015 14 days 10 mg/Kg Gasoline Range Organics (GRO)

V02-01-15 147 800-888-8061



Hazardous Waste Profile A

EPA 8021

Remediation/ Aqueous Liquid

(3) 40mL VOA Vials

Cool < 6 ºC; HCl

14 days 1.00 - 10.0 ug/L

$550


EPA 9040C 125 ml Plastic

Cool < 6 ºC

14 days N/A Corrosivity

ASTM D93 500 ml Plastic 14 days 75oC Flashpoint

EPA 9095A 500 ml Plastic 14 days N/A Free Liquids

EPA 8082A


w/Teflon Lined Cap

1 year 1.00 ug/L PCBs (Polychlorinated Biphenyls)

SM2540B 500 ml Plastic 14 days N/A Percent Solids / Moisture

Chapter 7 500 ml Plastic 14 days 200.000 Reactivity

EPA 6010 500 ml Plastic 14 days 0.100 - 10.0 TCLP Metals: Arsenic, Barium, Cadmium, Chromium, Lead, Selenium


EPA 8015


w/Teflon Lined Cap

7 days 0.500 Diesel Range Organics (DRO)

EPA 8015(3) 40mL VOA

VialsCool < 6 ºC;

HCl14 days 500 ug/L Gasoline Range Organics (GRO)

Hazardous Waste Profile B

EPA 8021


4 oz Glass Jar

Cool < 6 ºC

14 days 1.00 mg/Kg

$462


EPA 9095A

(2) 16 oz Glass Jars

14 days N/A Free Liquids


EPA 3550 Sec 7.2 14 days N/A Percent Moisture

EPA 6010 6 months 0.100 - 10.0 TCLP Metals: Arsenic, Barium, Cadmium, Chromium, Lead, Selenium


EPA 8015 14 days 10 mg/Kg Diesel Range Organics (DRO)

EPA 8015 14 days 10 mg/Kg Gasoline Range Organics (GRO)

V02-01-15 148 800-888-8061



Hazardous Waste Profile B

EPA 8021

Remediation/ Aqueous Liquid

(3) 40mL VOA Vials

Cool < 6 ºC; HCl

14 days 1.00 - 10.0 ug/L

$462


EPA 9095A 500 ml Plastic

Cool < 6 ºC

14 days N/A Free Liquids

EPA 8082


w/Teflon Lined Cap

1 year 1.00 ug/L PCBs (Polychlorinated Biphenyls)

SM2540B 500 ml Plastic 14 days N/A Percent Solids / Moisture

EPA 6010 500 ml Plastic 14 days 0.100 - 10.0 TCLP Metals: Arsenic, Barium, Cadmium, Chromium, Lead, Selenium


EPA 8015


w/Teflon Lined Cap

7 days 0.500 Diesel Range Organics (DRO)

EPA 8015(3) 40mL VOA

VialsCool < 6 ºC;

HCl14 days 500 ug/L Gasoline Range Organics (GRO)

Miscellaneous

Sample Preoparation Fee Various Solid VariousSee Specific

Analyte MethodSee Specific

Analyte MethodN/A $28

Sample preparation fee applied if a sample matrix requires further reduction prior to analysis. Client notifiaction by Analytics required.

V02-01-15 149 800-888-8061

V02-25-13 Page 1 800-888-8061

V. Miscellaneous Services and Fees

1. Introduction

By providing these more specialized analyses, Analytics has found that it truly provides our clients a full-service “one stop shop” for their analytical testing needs and requirements. Miscellaneous Services are the remaining laboratory analyses that are less commonly run and do not necessarily conform to the traditional industrial hygiene or environmental testing section of our service directory. The analyses contained in the section are:

• Microbiology: Bacteria in Air • Microbiology: Bacteria in Water • Microbiology: Fungal • Air Quality Testing

Since Analytics performs a wide array of analytical methodologies in-house, we do not normally subcontract any samples. If, however, we do not run the analysis, then the use of a qualified laboratory for subcontracted analytical services must be agreed to by Analytics’ client before the analyses take place. By providing subcontract services, Analytics can serve as your “one-stop shop” for all your testing needs. Samples that require analysis by a subcontract laboratory for capability, test verification, or workload purposes are subcontracted whenever possible to a laboratory which is deemed competent by Analytics based upon accreditation and work history (for instance, IH sample subcontracting will be to an AIHA-accredited lab whenever feasible). Customer acceptance of subcontracting, in writing whenever possible, is obtained before subcontracting, and the subcontract laboratory is prominently identified in reporting of results. Analytics remains responsible for subcontracted testing unless the customer or a regulatory authority has specified the subcontract laboratory to be employed. Analytics completes a separate chain-of-custody (COC) document to accompany the samples to the subcontract laboratory. Upon receipt of the data, the laboratory director and/or project manager reviews the results prior to sending the data. Any problems encountered with subcontracted analyses should be communicated to the project manager at Analytics. Analytics will then contact our subcontract laboratory so the project manager remains the sole contact.

V02-01-15 150 800-888-8061

V2.Microbiology:BacteriainAir

Test Procedure Method of Analysis Sampling Media Sampling RateSuggested Air

Volume, LUnit Cost

Total Bacterial Count, Air Visual Plate CountContact Customer Service for Media Requirements

For Andersen Impactor: 28.3 L/min

100-300 Call for Pricing

Total Bacterial Count, Air with Identification

(Specify No. to ID)

Visual Plate Count and Laboratory Identification

Contact Customer Service for Media Requirements



V02-01-15 151 800-888-8061

V3.Microbiology:BacteriainWater

Parameter Method Sample Container Preservative Holding Time Cost

Total Bacterial Count, Bulk Visual Plate Count Bulk Material N/A N/A Call for Pricing

Total Bacterial Count, Bulk with Identification (Specify No. to

ID)


Bulk Material N/A N/A Call for Pricing

Total Bacterial Count, Water Visual Plate Count100 mL of water in sterile container,

refrigeratedNA2S2O3 24 hours Call for Pricing

Total Bacterial Count, Water with Identification (Specify No.

to ID)

Visual Plate Count and Laboratory

Identification

100 mL of water in sterile container,

refrigeratedNA2S2O3 24 hours Call for Pricing

Total Bacterial Count, Wipe Visual Plate Count Wipe Specimen 163100 N/A 24 hours Call for Pricing

Total Bacterial Count, Wipe with Identification (Specify No.

to ID)

Visual Plate Count and Laboratory

IdentificationWipe Specimen 163100 N/A 24 hours Call for Pricing

Total Coliform SM9221B 120 mL sterile plastic NA2S2O3 24 hours Call for Pricing

Total Coliform MPN (For bacte-ria counts)

SM9221C 120 mL sterile plastic NA2S2O3 24 hours Call for Pricing

Fecal Coliform MPN SM9221C 120 mL sterile plastic NA2S2O3 8 hours Call for Pricing

Fecal Steptococcus MPN SM9230B 120 mL sterile plastic NA2S2O3 8 hours Call for Pricing

Fecal Enterococcus MPN SM9230B 120 mL sterile plastic NA2S2O3 8 hours Call for Pricing

Heterotrophic Plate Count SM9215B100 mL in sterile

containerNA2S2O3 8 hours Call for Pricing

Legionella Culture and ID100 mL in sterile

containerNA2S2O3 24 hours Call for Pricing

V02-01-15 152 800-888-8061

V4.Microbiology:Fungal

Fungal-Viable/Cultured


Volume, LUnit Cost

Total Fungal Count, Air Visual Plate CountContact Customer Service for Media Requirements



Total Fungal Count, Air with Identification (Specify No. to

ID)


Contact Customer Service for Media Requirements



Total Fungal Count, Bulk Visual Plate Count Bulk Material N/A N/A Call for Pricing

Total Fungal Count, Bulk with Identification (Specify No. to

ID)


Bulk Material N/A N/A Call for Pricing

Total Fungal Count, Water Visual Plate Count100 mL of water in sterile

container, refrigeratedN/A N/A Call for Pricing

Total Fungal Count, Water with Identification (Specify No. to

ID)


100 mL of water in sterile container, refrigerated

N/A N/A Call for Pricing

Total Fungal Count, Wipe Visual Plate Count Wipe Specimen 163100 N/A N/A Call for Pricing

Total Fungal Count, Wipe with Identification (Specify No. to

ID)


Wipe Specimen 163100 N/A N/A Call for Pricing

Fungal-Non-Viable/DirectAnalysis


Volume, LUnit Cost

Mold Spore Count & ID (Air) Standard Microscopy Air-O-Cell Cassette 15 LPM 150 Call for Pricing

Mold Spore ID (Bulk) Standard Microscopy Zip-Loc Bag 1x1 Inch N/A Call for Pricing

Mold Spore Count/ID and Particulate Profile

Standard Microscopy Air-O-Cell Cassette 15 LPM 150 Call for Pricing

V02-01-15 153 800-888-8061

V5.AirQualityTesting

Method Compounds Sampling Approach Instrumentation Detection Limit Unit Price

TO-4PCBs, 4,4-DDE, DDT,

DDDFilter and PUF absorbent

trapGC/MS or GC/FID/ECD

0.2 pg/m3 – 200 ng/m3

Call for Pricing

TO-8 Cresol/Phenol Midget impingers HPLC 1-250 ppb Call for Pricing

TO-14Toluene, Benzene,

ChlorobenzeneEvacuated stainless steel

canisterGC/MS or GC/FID/ECD 0.2-25 ppbv Call for Pricing

TO-15Methanol, Benzene,

Xylene, NitrobenzeneSpecially prepared can-

istersGC/MS 0.2-25 ppbv Call for Pricing

TO-17Alcohols, Ketones, Ben-

zene, Toluene, o-Xy-lene, Chlorobenzene

Multi-Bed Sorbent Tube GC/MS 0.2-25 ppbv Call for Pricing

Particulate Size Estimate (Bulk, Surface or Air)

Standard Microscopy. 2 Ranges: <2.5 µm, ≥2.5 μm or <10 μm,

≥10 μm

Bulk – Sealable glass or plastic vials.

Surface - micro-vac on MCEF.

Air - MCEF


Particulate Size Estimate(Bulk, Surface or Air)

Standard Microscopy. 2 Ranges: <2.5 µm, ≥2.5 μm or <10 μm,

≥10 μm

Bulk – Sealable glass or plastic vials.

Surface - micro-vac on MCEF.

Air - MCEF


Particle/Fiber Characterization & Identification

Standard Microscopy

Mini-vac samples, scrapings, bulk materials in sealed bags, tape lifts,

or MCEF filters

N/A N/A $97.00

V02-01-15 154 800-888-8061

V02-25-13 Page 1 800-888-8061

VI. Service Guide Summary

1. Standard Terms and Conditions Unless otherwise agreed to in a formal contract, services provided by Analytics Corporation are limited to the terms and conditions stated below. Confidentiality – Strict confidentiality is maintained in all business dealings with clients. Confidentiality agreements are therefore willingly provided. In instances where information is subpoenaed by and must be released to a regulatory or legal body, the client is promptly notified. Likewise, the client agrees to respect all such relationships of trust. Client agrees it will not use Analytics’ name and/or data in any manner which might cause harm to Analytics’ business and/or reputation. Under no circumstances is the name Analytics Corporation (Analytics) to be published without written approval. No verbal results, preliminary or final reports, copies of reports, or electronic deliverables will be sent to anyone other than the client unless the client formally requests us to do so in writing. Contracts – All contracts are subject to review and approval and must be signed by a corporate officer. Payment Terms – Payment in advance is required for all clients except those who establish credit with our company. For clients with approved credit, our standard terms due upon receipt, after which time a 1% per month late charge or maximum amount permitted by law (if less) is added to all unpaid balances. Any deviation in payment terms must be agreed to in writing. Analytics has the right to ask for payment in advance, if the established payment terms are not adhered to. Analytics reserves the right to cease all work in the event the client does not pay its invoices. In the event of default in payment for services rendered, the client is responsible for reasonable collection and/or legal fees. Billing – All fees are billed directly to the client. Third party billing will not be accepted without a statement, signed by the third party, which acknowledges and accepts payment responsibility. All paperwork submitted with a sample describes the testing desired, and any changes must be submitted in writing. If changes are made after the original request is initiated or has been completed, the client must accept payment responsibility. Analytics is not responsible for holding times that are exceeded due to such changes. All changes should be faxed to: “CLIENT SERVICES - URGENT”. Rush Analyses – A surcharge is added to the agreed upon fee if rush analysis is requested. The surcharge will depend upon the turnaround time requested. Rush analysis is offered contingent upon availability and pre-arrangement with Client Services or your project manager. Hazard Communication – It is the client’s responsibility to information the laboratory of any hazardous characteristics known or suspected about the sample based on the collection site or circumstances. Information on hazard prevention and personal protection should also be provided to Analytics. Delivery of Samples – Upon timely delivery of samples, Analytics will use best efforts to meet mutually agreed upon turnaround times. The risk of loss or damage to the sample during shipment remains with the client. Analytics will advise the client of samples that are missing or received in damaged, contaminated, or improperly preserved condition. The risk of loss or damage to the sample will be assumed by Analytics at the time possession of the sample is delivered to an employee. Analytics reserves the right to refuse or to rescind acceptance of any samples, which in the judgment of Analytics is likely to pose any unreasonable risk in handling and/or analysis. The client aggress that any sample containing any hazardous substance which is to be delivered to Analytics is labeled, packaged, manifested, transported, and delivered to Analytics in accordance with the most current state and federal regulations. These regulations include, but are not limited to OSHA, EPA, TSCA, RCRA, DOT, FDA and applicable federal, state, and local agencies. Sample Containers – Analytics will provide sample containers/media upon request. Analytics reserves the right to charge a fee for sample containers/media. Containers, media, and packaging not returned after thirty days will be assessed a fee based on cost plus 25%.

V02-01-15 155 800-888-8061

V02-25-13 Page 2 800-888-8061

Retention of Samples – After the analytical results have been reported, samples are routinely retained in our storage facilities for 30 days. Prior arrangements must be made if samples are to be held for periods longer than this. Analytics may charge a monthly fee for long-term storage. Quality Assurance – Analytics will perform services consistent with our Quality Assurance Program Plans (QAPP) and our Standard Operating Procedures. (SOPs). It is the responsibility of the client to confirm that our standard practices meet the needs of the client prior to placing an order for work. In the event the client desires an alternative to these standard practices, such request must be made in writing prior to samples acceptance. Retention of Reports – Unless otherwise agreed to in writing, Analytics will retain copies of analytics reports for a period of five (5) years, after which the reports may be destroyed. If the client requests additional copies of the analytical reports during the retention period, an additional charge may apply for preparation and printing. Reports – Analytics prohibits the use of its name in connection with any unauthorized use of its reports. Special Reports – Additional charges may be necessary for customized reports which differ significantly from the Analytics’ standard report. Additional charges may apply for specific QA/QC report formats for data packages and/or electronic deliverables. Please call for specific charges. Hazardous Waste – Unused portions of samples found or suspected to be hazardous according to state or federal guidelines may be returned to the client upon completion of the analytical work. These include samples know or suspected to contain hazardous materials as defined by state or federal regulatory agencies. The cost of returning the sample may be invoiced to the client. The sample and portions thereof remain the property of the client at all times. Litigation – All costs associated with compliance to any subpoena or other official request for documents, for testimony in a court of law, or for any other purpose relating to work performed by Analytics in connection with work performed for that client, shall be paid by the client. Such costs shall include, but are not limited to, hourly charge for persons involved in responding to subpoenas, travel and accommodations, mileage, attorney’s preparation of testifier and advice of counsel in connection with response to subpoenas, and all other expenses deemed reasonable and associated with said litigation. Indemnification, Liability, and Insurance – Analytics agrees to indemnify, defend, and save the client, its officers, directors, employees, agents, and representatives harmless from all losses, expenses, demands, and claims made against the clients, its officers, directors, employees, agents, and representatives because of any personal injuries, death, or property damage to the extent caused by the negligence or willful misconduct of Analytics, its employees, agents, or representatives in connection with the performance of services under this agreement, except to the extent such losses, expenses, demands, or claims occur as a result of the negligent or willful acts or omissions of the client, its officers, directors, employees, agents, and representatives; however, such indemnification and damages shall, in the aggregate, be limited to an amount equal to the lesser of (a) damages suffered by the client as a direct result thereof, or (b) the total amount paid by the client to Analytics for the work herein covered. Analytics will, if requested by the client, furnish certificates of insurance from its carrier(s) evidencing appropriate insurance coverage. Warranty and Limits of Liability – In accepting analytical work, we warrant the accuracy of test results for the sample as submitted. The foregoing express warranty is exclusive and is given in lieu of all other warranties, expressed or implied. We disclaim any other warranties, expressed or implied, including a warranty of fitness for particular purpose and warranty of merchantability. In no event shall Analytics be liable for indirect, special, consequential, or incidental damages including, but not limited to, damages for loss of profit or goodwill regardless of the negligence (either sole or concurrent) of Analytics and whether Analytics has been informed of the possibility of such damages. We accept no legal responsibility for the purposes for which the client uses the test results. No purchase order or other order for work shall be accepted by Analytics which includes any conditions that vary from the above described Standard Terms and Conditions, and Analytics hereby objects to any conflicting terms contained in any acceptance or order submitted by client. Equal Opportunity/Affirmative Action Notice – Analytics Corporation is an equal opportunity/affirmative action employer and complies with all the regulations of executive order 11246 and the regulations promulgated there under.

Documents

Table of Contents - Analytics Corporation