Table of Contents

Preface

Chapter 1: Materials Science and Materials Processing Technologies

Research on the Performance of Shielded Wire Passivated by 823 Preservatives in NeutralSalt Spray TestK.S. Dai, W.K. Xiao and T. Yu 3Effect of Annealing Temperature on the Soft Magnetic Behavior of Sendust Powder CoreD. Wei, X. Wang, Z.K. Feng and R.Z. Gong 6Photoluminescence Property Study on Patterned Growth of Aligned ZnO Nanowire ArraysH.Y. Zhao, M. Fu and D.W. He 11Preparation and Properties of Compatibilized Poly(Butylenesadipate-Co-Terephalate)/Thermoplastic Starch BlendsM.M. Xiao, Y.F. Pan and H.N. Xiao 15Rols of ZnO in Cu-ZnO Catalyst for Dehydrogenation of Sec-ButanolJ. Deng, Y. Liu and H.S. Zhang 19Correlation between Clinicopathology and Expression of Heat Shock Protein 72 in HumanHepatocellular CarcinomaY. Fang, X.P. Wang, H.P. Lin, B. Xu, J.G. Fang, K.P. Zhang and Y.X. Yang 23Fluorescence Enhancement of ZnS Nanocrystals via Ultraviolet IrradiationL.L. Peng, B.T. Liu and T. Han 27Effect of Core/Shell Ratio on Performance of Paraffin/Polyurea Phase ChangeMicroencapsulesW.S. Luo, S.F. Yu and J.M. Zhou 32Study on Elongation Properties of Car Roof Interior FabricW.L. Chen, L.Y. Wan and W.H. Zhan 36The Ethical Reflection on Nanotechnology Applications in the Field of SportsZ. Qi 40Electronic Structure of Wurtzite Ga0.75Al0.25N: A First Principle CalculationM.Z. Yang and M.S. Wang 43Effects of Graphene Oxide on the Structure of Human γ-GlobulinsR. Feng, Y.P. Jiao and C.R. Zhou 47The Methods of Corrosion Prediction for Materials in Natural Environment and theirApplicationsA.A. Zhang, W.F. Zhang, Y.L. Zhang and T.J. LIU 51Application of New Complex Flocculant in Seawater Desalination PretreatmentJ. Cheng, J. Zhang and X. Yu 57Preparation of Micro/Nanoporous Polyacrylonitrile Nanofibers via In Situ Pore-FormingMethodG.S. Hong, X. Li, Y. Yang, L.D. Shen and M. Wang 60Biological Conjugate between Antibody and ZnS Nanoparticles as Probe for AtomicAbsorption Spectrophotometry Determination of EstriolC.Y. Zhang, C.T. Wang, S.H. Wang and L.Y. Du 64The Structure Transition of (AgCu)309 Clusters during the Freezing Process: A MolecularDynamics SimulationH. Huang, Z.F. Cheng, X.Y. Xiao, J.H. Xia and T.Z. Liu 67Simulation of Structural Transition of Ni Nano-Material under Different PressuresT.Z. Liu, Z.F. Cheng, J.H. Xia, X.Y. Xiao and H. Huang 72Carbon Dots for Detection of Metal IonsJ. Yu, M.L. Wu, N. Song, L.N. Yang and J.R. Chen 77Study on Two Plasma Physical Vapor Deposition Methods for Preparing Ultrafine AlPowdersQ. Yu, M.L. Li, S. Ji, K.M. Qian and Y.S. Zhou 81

Mechatronics Engineering, Computing and Information TechnologyMechatronics Engineering, Computing and Information TechnologyMechatronics Engineering, Computing and Information TechnologyMechatronics Engineering, Computing and Information TechnologyISBN(softcover): 978-3-03835-115-3 ISBN(eBook): 978-3-03826-496-5

Uniformity Analysis on Temperature Field of Big Diameter GCr15 Bearing Steel Bar in theProcess of Immersion QuenchingG.Y. Liu, X.F. Ma, H. Jiang, D.M. Zhu and S.J. Zhang 86Analysis and Optimization of Metal to Composite Joints for Marine StructuresX.W. Li, P. Li, Z. Lin and D.M. Yang 91An Overview with Applications to Graphene-Based CompositesN. Song, D. Chen, L.L. Luo and J.R. Chen 96Effect of Technology for Semi Solid State Cooling Plate on Primary Carbides andMechanical Property of Hypereutectic High Chromium Cast IronS.B. Liu, X.C. Meng, H.B. Li and X.M. Zhao 100Prepared Patterned Magnetic Composite Microspheres by Emulsion PolymerizationR. Yin and J.L. Zhao 105Preparation and Characterization of LizarditeS.M. Zheng and K.M. Wang 109Simulation Analysis of Metal Flow in High-Speed Cold Roll-BeatingF.K. Cui, Y.F. Xie, X.D. Dong and L.M. Hou 113Effect of Silica Promoter on Performance of CuO-ZnO-ZrO2 Catalyst for MethanolSynthesis from CO2 HydrogenationM.Y. Jia, W.G. Gao, H. Wang and Y.H. Wang 117Conductive Polyaniline and Paper Reinforced CompositesJ.H. Yan, R.M. Xu and N. Yun 123A Comparative Study of Three Different Airing Ways of Fermented Grain in Brewing ofLuzhou-Flavor BaijiuK. Long, Z.H. Ao, Y.Y. Ma and J.G. Yang 127Study on Crystal Morphology and its Formation MechanismT. He 133Application of Ecological Environment Material in Industrial DesignW.M. Zhang and Q.M. Zhang 137Electrochemical Investigation Cu Corrosion Behaviour of Electronic Circuit Board in BaseElectrolyteZ.H. Tao, B. Leng, C. Wang, D.J. Xiao, Z. Tan and W. He 141Research on Dynamic Mechanism of Dislocation Breeding and Networking under ShearingStress of Magnesium AlloyX.Z. Mao, M. Xia and T. Tian 145The Development of Antibacterial-Fire Retardant Bamboo Pulp/Cotton Tufted CarpetsJ.M. Lu 149Influence of Coolmax Fiber Content on Comfortable Properties of Cotton/Coolmax Weft-Varied FabricJ.M. Lu 154Effectiveness of an Inorganic Corrosion Inhibitor in Pore Solution Containing SodiumChlorideX.G. Feng, G.H. Dong and J.Y. Fan 158Effect of Elemental Sulfur on Corrosion Behavior of Super 13Cr Martensitic Stainless SteelS.D. Zhu, H.X. Ma, J.L. Li and Z.G. Yang 162Hydrothermal Synthesis of α-MnO2 Nanostructures at Low Temperature and theirElectrochemistry PropertiesS.L. Li, Y.J. Guo and J.J. Pu 166Research Progress of CBD-ZnS Thin-Film Buffer Layer of Solar CellsH. Ke, T.Z. Liu, S.W. Duo and H. Zhang 169Study on Crosslink Density of Natural Rubber with Different Initial Moisture ContentsDried by MicrowaveF.Q. Zhang, Y.Z. Wang, M. Chen, M.F. Huang and R.Z. Zeng 173Study on Density Functional Theory of Zn1-xMgxO AlloyF.C. Zhang, H.W. Cui, X.X. Ruan and W.H. Zhang 177Research Progress of High Quality Silicon Steel Magnesium OxideH.H. Wu, B.J. Luo, C.J. Gao, Y.N. Zhang, Q. Zhang and X.P. Huang 181Effect of Different Thicknesses of ZnS Thin Films on its Optical and Structural PropertiesS.W. Duo, H. Ke, T.Z. Liu and H. Zhang 185

b Mechatronics Engineering, Computing and Information Technology

The Microstructure and Wear-Resistant Properties of Laser Cladding Ni-Based WC Alloyon Q345 Steel SurfaceS.M. Zhu and Y.D. Zhang 189Research for Mineral Processing on a Copper Oxide Ore in YunnanZ.G. Zhang, Q.J. Liu and J.C. Ran 193Experiment Research of a Certain Cu-Pb-Zn Poly-Metallic Sulfide Ore in YunnanJ.C. Ran, Q.J. Liu and Z.G. Zhang 197Flotation Test of High Sulfur Copper Ore in the Northwest in YunnanZ.G. Zhang, Q.J. Liu and J.C. Ran 201Separation Test of Ilmenite in YunnanJ.C. Ran, Q.J. Liu and Z.G. Zhang 205The Unique Fluoride Sorption Behavior onto Nanosized Zirconium OxidesD. Xiao and C. Jiang 209Preparation of Glyphosate from Catalytic Oxidation N-Phosphonomethyl IminodiaceticAcidY.B. Liu, E.X. Liang, J.M. Yi, X. Wu and P.L. Zhang 213Design of Metamaterials 340GHz Polarizing ConverterC. Liu, X.T. Wang and J. Deng 217Ultrasound-Pulse Electrodeposition Preparation of Fe-Nano ZrO2 Functional GradientCoatingS. Yan, M.H. Wu, Z. Ning and Y.G. Wang 222A Study on Sacrificial Anode Cathodic Protection for Wharf Steel Pile of Tripoli LebanonD.J. Fang, J. Huang, Y.P. Wang, E.B. Shen, S.K. Li and L.Q. Tu 228Study on Thermal Conductivities of Composite Adsorbents for Adsorption RefrigerationY. Lin and J. Gao 232Study on Fractal Dimension of Acoustic Emission during Cemented Backfill Micro CrackEvolution ProcessC. Gong, C.H. Li and K. Zhao 236Research on Synthesis of Morphology Controllable Silver Nanoparticles and itsApplications in Solar CellsY.S. Wei, S.K. Lu and M.H. Gui 241Investigation of the Mechanical Properties of Intercritically Treated Ultra High StrengthSteelZ. Li, D. Wu, H.H. Yu, L. Luo and M. Liu 245Effect of Overaging Temperature on the Mechanical Properties of Ultra-High StrengthMultiphase SteelZ. Li, Z. Zheng, D.T. Qiu, L.Z. Guo, X. Gao, T. Yu and Z.H. Li 249Sumoylation of PDX-1 Regulates the Rat Insulin 2 Gene TranscriptionN. Wang, R.L. Jian, F.P. Wang, L.B. Mao and T.C. Zhang 253Construction and Functional Analysis of Luciferase Reporter Plasmid Containing PCNAGene PromoterT.C. Zhang, Y. Wang, X.H. Liao, N. Wang and H. Zhou 257Procedure and Discussion of Failure Analysis in Iron-Steel MaterialsZ.G. Wang, L.D. Shi, M. Jing and Y. Xu 261Study on Temperature Uniformity and Rising Rate of High-Power Lithium-Ion BatteryPackB. Wang, Y.M. Nie, Z.J. Yin and Z.T. He 265The Model of PNGV of High-Power Lithium-Ion Battery and Test ValidationB. Wang, W. Zhou, H.Q. Shi and B. Li 270Scanning Electron Microscope in Metallurgical ExperimentZ.G. Wang, L. Shi, Y. Xu and Q.L. Sun 275Development of SnS Thin Films for Solar CellsZ.G. Wang, W.C. Gao, J. Li and K.G. Liu 278Biosorption of Ni (II) from Aqueous Solution by Aspergillus nigerL.F. Zhang, Z. Shao and C.Y. Jiang 282Kinetic Study for Biosorption of Cr (VI) from Aqueous Solution by Aspergillus nigerL.F. Zhang, C.Y. Jiang and Z. Shao 286

Applied Mechanics and Materials Vols. 556-562 c

A Technique Method of Recycling Sylvite Zinc Plating Waste Liquid in LaboratoryL. Shi and D.Y. Li 290Simulation and Simulation Software Development of the Braking Process of a SubwayTrainL. Han, C. Tian, Y. Wang, M.L. Wu and Z.J. Luo 294Effect of Particulate Reinforcement Electroless Plating on Properties of SiC/Fe CompositeY.B. Zhang, B.Y. Zong, J.F. Jin and X.J. Cao 302The Structures and Melting Properties of the Al-W Mixed ClustersJ.W. Sun 306The Effect of Al on Phase Stability and Oxidation Behavior in Ternary Nb-Ti-Si AlloysY.J. Jiang 310Microwave Dielectric Properties of B2O3 Doped Ca [(Li1/3Nb2/3)0.95Zr0.05]O3−δ CeramicsG. Xiong 314Microwave Dielectric Properties of Ca[(Li1/3Nb2/3)0.92Zr0.08]O3−δ Ceramics with GlassAdditionG. Xiong 318Study on Thermogravimetric and Differential Thermal Characteristics of Aluminum SaltFlame RetardantsX. Zhang, D. Li, H. Xie and Z.L. Zhang 322Thermal Properties Study of Magnesium Salt Flame Retardants Prepared by DifferentAlkali SourcesX. Zhang, D. Li, H. Xie and W.J. Xu 326Structural, Optical and Magnetic Properties of W-Doped TiO2J.R. Jiao, J.H. Wang, C.W. Gong, Y.S. Chai and W. Shao 330Expanded Vermiculite Applied in the Catalytic Process as a Catalyst SupportM.X. Wu, Y.S. Qiao, J.P. Shang and Y. Guo 335Preparation and Characterization of GNP/Nylon CompositesB.F. Xu, Z.D. Lin, J.M. Chen and J. Lin 339Preparation and Characterization of Wear-Resistant Polyurethane-Based MaterialsB.F. Xu, Z.D. Lin, J.M. Chen and J. Lin 343Variable Selection in Proteomic Profile Classification by Interval Support Vector Machines(iSVM)X.L. Yang and H.Y. He 347Consensus Maximum Margin Criterion for Classification of Proteomic ProfileX.L. Yang and D.X. Li 351On the Microstructure of a Biocomposite Fabricated from Bioceramics and 3D Ti-Mesh byDip Coating MethodW. Yi, X.D. Sun, D. Niu and X.Z. Hu 355Hydrothermal Synthesis and Photocatalytic Property of CdLa2S4 HierarchicalMicrospheresG.J. Xing, H.L. Guo, P. Li and G.M. Wu 362Experimental Study of Biological Material Preparation Based on Optical and MechanicalDynamicsJ.M. Wan and M.Z. Ao 366The Effects of Coupling Agents on the Electrical Properties of Polyimide/TiO2 Hybrid FilmsK. Yan and X.X. Liu 371Experimental Research on Impacts of Operation Parameters on AgglomerationCharacteristics during CFB Biomass GasificationX.X. Fan, L.G. Yang, H.L. Zhang and H.J. Chen 375First Principle Calculation of CO Chemisorption on δ-Pu(001) SurfaceR.S. Li, B. He, P. Xu and F.T. Zhao 380Crystallization Characteristic Study for Amorphous of Nd60Al10Cu20Ni10D.M. Yu, Y.H. Hu, D. Wang and X.J. Li 385Tensile and Impact Behavior and Fracture Characteristics of FGH96 Powder MetallurgySuperalloyX.L. Liu and K. Zhao 389Research of EDM Titanium Alloy TC11 Based on GM(1,N) Model and BP Neural NetworkJ. Gao, Y. Sun and D. Wang 395

d Mechatronics Engineering, Computing and Information Technology

Research on Alkali-Activator and its Effects on Mechanical Properties of Slag-BasedGeopolymer at early AgeL.S. Chen, X. Chen, J.T. Xu and Z. Yang 399Research on Continuous Cooling Transformation Curve of a C-Si-Mn SteelZ.W. Hu, G. Xu, C. Zhang and H.J. Hu 404Synthesis of a Novel D-A Type Photoelectrical Material: 5,5'-(9,9-Dioctyl-9H-Fluorene-2,7-Diyl)bis(Thiophene-2-Carbaldehyde)X.X. Sun, Z.B. Tang and Y. Hu 408Study of the High-Pressure HCP Phase of Al: A Computer Aided Design and SimulationC. Xu and D. Chen 412Microscopic Mechanism of Salt-Bearing Polymer FloodingL.H. Sun, J.H. Li, C.L. Sun, Y.L. Zhang and Z.Q. Li 416Spectrofluorimetric Determination of Bilirubin Using Enoxacine-Terbium ProbeW.W. Bian 421Preparation of Electrodeposited Mo-Ni Coating in Weak Acid SolutionX.Z. Liu, J.L. Feng, Y.F. Luo, X.Z. Liu, J. Chen and L. Ding 425The Structural, Electrical, Magnetic Properties of (Cu, Co) Co-Doped ZnO Thin FilmP. Cao, Y. Bai and Z. Qu 429The Structure and Properties of Sulfo-Butylated Celluluse Ether (SBC) Based Water-Reducing AgentsH. Maimaiti and X. Aerken 433Molecular Simulation of Polycarbonate and Thermomechanical AnalysisX.J. Wang, X.T. Zheng, W. Zheng and S.Z. Wu 441Analysis of Welding Crack in Thermal Sprayed Water Wall Tubes and the Establishmentof Welding ProcedureQ. Wang, Q. Wang, G.X. Zhang, J.F. Zhao, W.P. Li, C.F. Liu, X.X. Xu, J.Y. Guo and H.X. Cui 445Study on the Mechanism of CO2 Flooding with Experimental MethodL.Y. Song, J.W. Wang, T.L. Zhuang, Z.W. Fu, Y.L. Zhang and C. Chen 448Ultrasonic Electrodeposition Nano Ni-TiN and Laser Assisted Enhancing ProcessPerformance ResearchW.P. Jia, Z.Y. Zhao and M.H. Wu 452An Improved Structure Design of Rolling Drum for the Mixture of Different Sizes ofParticlesY.L. Gao, L. Zhou and X. Wang 456Flexible Stretch Forming Technology for Sheet Metal Based on Discrete-Gripper and Multi-Point DieX. Chen, M.Z. Li, W.H. Liu and Z.Q. Hou 460Influence on Different Forms of Applied Loads upon the Stress Corrosion of Pipeline SteelQ.L. Sun, L.D. Shi and Z.R. Liu 464Research on CCT Curve of 12Cr2Mo1R Pressure Vessel SteelM. Wang, G. Xu, H.L. Yang, M.X. Zhou and T. Xiong 468The Simulation of Temperature Field of 12Cr2Mo1R Ultra Thick Plate for Pressure Vesselsduring Heat Treatment by 3D-FEMY. Zhang, G. Xu, Y. Yu, H.L. Yang and M.X. Zhou 472Study on the Heat Treatment Process of Ultra Thick Plate of 12Cr2Mo1R Pressure VesselSteelM.X. Zhou, G. Xu, H.L. Yang and T. Xiong 476Continuous Cooling Transformation Behavior of a Ti Addition SteelC. Zhang, G. Xu, Z.W. Hu and H.L. Yang 480Effect of Heat Treatment on Structure and Mechanical Properties of Al-30 Wt.% Si AlloysRefined and Modified with Sr+B+REX.S. Li, A.H. Cai and J.J. Zeng 484Grinding Radial Force Monitoring of High Cobalt Cemented Carbide Blank Piece andConstant Force Feeding Implementation MethodH. Wang and Y.A. Hu 489Modification of Plasma Spurt Spraying on Improving Fatigue Property of Welded JointX.H. Zhao and Y. Liu 494Study on Technology Parameters for Coated Carbide Cutting ToolsX.J. Li, Y.H. Hu, D. Wang and D.M. Yu 498

Applied Mechanics and Materials Vols. 556-562 e

Study on the Relationship between Total Hydrocarbon and Gases Dissolved in TransformerOilY. Chen and B. Song 502Influence Principles of Linear-Weld-Line Tailor-Weld Blanks’ Formability with DifferentThickness of Base MetalsY. Gan and H.C. Wang 507Diffusion and Oxidation Wear of Superhard Cutting Tool Based on ThermodynamicsF. Shao, Y.T. Wang, L.J. Zou, Y.Y. Wu and D. Sun 511Hole Quality Analysis in Helical Milling of CFRPH.Y. Wang and X.D. Qin 515Analysis on the Stability of Hydraulic Support in Great Tilt Angle Mining FaceQ.Q. Huang and Q.J. Zhang 519Electronic Structures of the High-Pressure hcp and bcc Phases of Al: A Computer AidedDesign and SimulationC. Xu and D. Chen 523A New Method for Spectral Matching PretreatmentY.T. Zhou, X.P. Du and M.Z. Li 527Fracture Analysis of 500kV Composite Insulators Suspension ClampG.D. Han, Z.Q. Wu, S.T. Wan, Z.J. Lv, R.H. Liu and J. Wang 531The Study of Electronic Structure and Optical Properties of 2H-SiCF.C. Zhang, H.W. Cui, X.X. Ruan and W.H. Zhang 535Early Apoptosis Difference and Mechanism of Hepatic Cell Lines Treated by ExtremelyLow Frequency Altering Electro-Magnetic Field Combined with Magnetic Nano Fe3O4Particles In VitroZ.Q. Chen, J. Wen, H. Shang, Y. Tang and Z. Fang 539Study on the Processing of Corroded Shielded Wire in SubstationK.S. Dai, W.K. Xiao and D.K.Q. Mu 547A Novel Technique of Hot Stretch-Creep Forming via Resistance HeatingJ.J. Xiao, D.S. Li, X.Q. Li and M.J. Xu 550Mechanical Performance Study for Rapid Prototyping of Selective Laser SinteringD.M. Yu, D. Wang and X.J. Li 557A Computer-Controlled In Situ Analysis Instrument Based on Laser Induced BreakdownSpectroscopyJ. Wang, M.J. Xu, L.L. Shi, Q. Shi, Y.C. Wang and Y.X. Duan 561Progress of ZnS and its Powder Morphology Synthesized by Chemical RouteW.C. Gao, N.J. Ji, J. Li and K.G. Liu 567A Study on the Influence and Improvement Measures of Colloidal Asphaltene on Crude OilD.G. Li, Z.C. Li and Y. Guo 571Quantitative Analysis and Research to Coal Quality Based on Near Infrared SpectrumH.W. Yan, Z.M. Yang, H.S. Lu and Y.H. Ju 575The Technique of Recycling Alkaline Zincate Zinc Plating Waste Liquid in LaboratoryD.Y. Li and L. Shi 580Fluorimetric Method for the Determination of Trace Amounts of Molybdenum Using 2-Hydroxy-1-Naphthaldehydene-p-AminotolueneW.W. Bian 584The Theoretical Prediction of Radioactive Aerosol Diffusion Based on Instantaneous PointSource ModelF. Liu and X.L. Cheng 588Seismic Imaging of Small Faults in Coal Seams by Prestack Time MigrationS.Z. Shi, J. Li, Y.C. Zhao, L.B. Yang, Y. Tang and R.J. Ji 592Analysis of Antireflection and Outburst Prevention Mechanism on HydrofractureTechnology in Soft Coal SeamY. Lei and W.B. Wu 597Development and Application of ASP Flooding Produced Fluid DemulsifierQ.J. Wang 603Analysis of Chemical Constituents in Jackfruit Peel by UPC2/Q-TOF-MS MethodX. Gong, H.L. Yu, N.L. Qi, S.D. Peng and L.J. Lin 607

f Mechatronics Engineering, Computing and Information Technology

The Protective Effect of Stichopus japonicus Fucoidan on PC12 Cells withHypoxia/Reoxygenation InjuryS.L. Song, W. Wang, X.C. Wang, H. Liang, Y.S. Wang and A.G. Ji 610Simulation of Sealing Performance of Elastomeric O-Ring Gasket Including Metal SkeletonG.L. Zhang and Z.B. Zeng 615Effect on P-Element Modification on Microstructure of Al-Based AlloyX.M. Wang, S. Zhu, J.Z. Cui, Q. Chang and Q.F. Zhu 620Research on the Friction and Wear Properties of the Copper Matrix Composites Reinforcedwith Copperized Carbon FibersR. Xu, Y. Wang, R.H. Liu and H. Zou 624Evolution of Microstructural Characteristics of Different Cement Materials Caused byCarbonationS.T. Pham and W. Prince 628Effect of Hg in Jiaozhou Bay Waters-The Temporal Variation of the Hg ContentD.F. Yang, S.X. Zhu, F.Y. Wang, H.Z. He and Y.J. Wu 633The Extraction and Application of a Novel Flocculant from OkraJ.Y. Sun, H.Y. Zhang, Q.G. Chen, D.F. Yang, M. Liu, L. Shao and Z.Y. Rong 637Cadmium Removal from Marine Sediment by Rhamnolipid BiosurfactantM. Liu, Q.G. Chen, L. Shao, J.Y. Sun and Z.Y. Rong 641Diameters Analysis of Europium-Containing Micelles by Dynamic Light ScatteringZ.Y. Li, Z.J. Xue, L.J. Kong and J. He 645Study on Microwave Curing of Polyurethane (PU)/Epoxy (EP) Interpenetrating Networks(IPN)Z.G. Mu, X.L. Bai, Y.D. Luo, J.T. Mei and M.H. Zhang 649

Chapter 2: Building, Construction and Environmental Research

Influences of Concrete Creep and Temperature Deformation on Vehilce Travelling acrossBridgeX.P. Wang 655Research on Detection Standard of Karst Roadbed Grouting Effect Based on theGeophysical MethodsY. Hu, M.Y. Zhao and S. Liang 659A Study on Factors Influencing the Efficiency of Electrochemical Desalination inReinforced ConcreteE.B. Shen, D.J. Fang, Y.P. Wang and J. Huang 663Effect on New Corrosion Inhibitor to Stress Corrosion Cracking of Prestressed Steel Wirein Simulated Concrete Pore SolutionQ.L. Sun, L.D. Shi and Z.R. Liu 667Axial Behavior of Concrete-Filled Double Skin Steel Tubular Stub Columns Filled withDemolished Concrete LumpY.Z. Wang and B.S. Li 671Seismic Response Analysis of Prestressed Concrete BridgeT. Zhang, D. Pan and J.C. Yue 675Three-Dimensional Finite Element Analysis of Qingyi River Aqueduct during OperationPeriodY.Y. Zhang and C.Y. Chen 679Temperature Stress Analysis for Concrete Dam of Jiangya Hydropower StationY.Y. Zhang and C.Y. Chen 683Experimental Research on Tensile Strength of Premixed Concrete at Early AgesX.F. Li and P. Ren 687Correlation Research of Concrete Mix Proportion on Cement Dosage in Coarse AggregateZ. Bo 692Investigation on Validity of J-Integral of Edge Crack under Cold Rolling ConditionJ.J. Chen, X.X. Li and H.L. Pan 696Finite Element Analysis of Wharf Track Beam under Eccentric LoadQ.D. Zeng and J.R. Deng 700

Applied Mechanics and Materials Vols. 556-562 g

A Simulation Study of Bearing Capacity of Bored Piles in Jinghe Bridge Based on ANSYSC. Xu and Y. Li 704Large Lateral Deformation Analysis of Angle Steel with Double Bolt JointsX. Zhou, H.B. Chen, Y.Q. Huang, P. Wang and W.L. Xiao 708Research on the Collapse Performance of RC Frame StructureJ. Zhao, J. Zhao and X.W. Liu 712The Design of Hydraulic Stripping Attachment’s Oil TankS.H. Zhang, Z.B. Zhou, H.L. Song and Y. Li 716Stress Distribution Properties in Adhesively Bonded BeamsX.C. He, Y.Q. Wang, H.Y. Cun and S.W. Yuan 720Interlaminar Stress Distributions of Notched Quasi-Isotropic AS4/PEEK LaminateB.S. Huang, G.H. Zhao and Z.H. Wang 725Study on Load Bearing Performance of Concrete Components Based on FEMY.Y. Wang, Z.P. Zhao and Y.H. Wang 729Turning Thermal Deformation Analysis of Aluminum Alloy Spherical Plain Bearing OuterRingY.J. Li and B.F. Li 733Straightening and Precision of Guide Rail Characteristics Based on Load-Stroke DeflectionRelations Using FEM SimulationH. Lu, M.A.S. Khaing, S. Gao and J. Liu 738Isogeometric Analysis Prediction of Stress Concentration Factor of Trivariate NURBS-Based Rectangular Plate with Central Elliptical HoleY.O. Tafa, G. Zhao and W. Wang 742Research of Supportive Capability and Security of Multi-Layer Template with ModernFrameworkY.Z. Wang 747Analysis of Vertical Dynamic Response of Simply Supported Beam Traversed by SuccessiveMoving LoadsX.P. Wang and M.S. Li 751The Dynamic Characteristics and Design of a Plate Sewage Heat ExchangerD.F. Sun, N. Qin and L. Feng 755On the Intelligent Optimization Design of Building StructureM.M. Zhang 759Analysis on Vibration Characteristics of PSM Induction Synchronization Segment Based onFinite ElementW. Chen, Q.X. Jia, H.X. Sun and S.C. Nian 763Study of the Habits of Colorful Plant Species Applied on Longcha HighwayJ. Duan, H. Zhang and F.Y. Liao 767The Research of Red Sandstone Slope Ecological Restoration of Longcha HighwayY.H. Xiao, G. Feng and F.Y. Liao 772Effect of Industries on the Environment of Jiaozhou BayY. Chen, H.J. Zhao, H. Ai, Q. Shi and D.F. Yang 776Study on Safety of Rock Wool ETICS in Use and Engineering PracticeZ.R. Zhang, F. Xie, Q. Cai and N. Zhou 780Some Primary and Secondary School Building of Masonry Structure SeismicReinforcement of Key Technical DiscussionW. Huang, Y.H. Du and F.Y. Zheng 785Influence Analysis of Ground Asymmetric Load to the Surrounding Rock Pressure ofExisting Open Trench TunnelJ. Cao, Q.X. Pu, S.S. Zeng and H.M. Liu 791Determine the Radiation Zone of Urban Rail Transit StationsL.Y. Sun, X.J. Zhang and B. Yu 799The Study of Indoor Thermal Environment Characteristics of Office Building Effected byStratum VentilationZ.Q. Liu, Z.J. Zuo and T.S. Liu 803Construction and Application of Multivariate Linear Regression Model on Road CostC.Y. Xia 807

h Mechatronics Engineering, Computing and Information Technology

Stability Analysis of Tailing Dam under the Action of SeepageH.Y. Zhang, A.M. Gong and H.Y. Huang 812Mooring System Waterdepth Design of Considering Stiffness and Drift Angle AnalysisH.L. Ren, J.X. Zou and G.P. Zou 817Study on the Residual Coal Distribution and the Improving MeasuresH.B. Luan 822Experimental Study on Sandstone Freezing-Thawing Damage Properties under Conditionof Water ChemistryH.W. Deng, C.F. Dong, J.L. Li, K.P. Zhou, W.G. Tian and J. Zhang 826The Analysis about Pollutant Index of the Wastewater Originating from Small VehiclesWashingK.J. Xiang and B.F. Xu 833Application of Cleaner Production Audit in Energy Conservation and Emission Reductionin the Beer Brewing IndustryJ.Q. Yu, Y. Zhang, S.S. Zhang and X. Li 837Low Carbon Scenarios Vs. Clean Coal Scenarios in China: How to close the Carbon Gap?Q. Chen and K. Rennings 841Study of Safe Distance Criterion between Concealed Karst Cave and TunnelY.B. Lai, M.S. Wang and X.H. You 849Researches of Index System and Method on Marine Oil Spill Threaten DegreeT.T. Zhang and H.B. Zheng 853Research on Building Construction Safety Management Standardization Importance ofEvaluation IndexY.F. Su, H.M. Li and Y. Li 857Analysis of Reliability Calculation and System Analysis of Gravity Retaining WallsG.M. Zhou, Y. Li and F. Zhang 862Research of Water Quality in Typical Low Permeability Oilfield Produced WaterTreatmentQ.S. Zhao 867Application Analysis of the Wall Insulation Construction Technology in Energy-Saving ofBuildingG. Li 872Computer Aided Design of Architecture Engineering Based on Mathematical Model of AHPT. Meng 877Study on Relationship between Deformation of Reservoir Water Level Fluctuation Changeof the Shuping LandslideX.Q. Yan, Z.H. Zhou and P.F. Tu 881Environmental Impacts Analysis and Evaluation for Sand CastingR.X. Yin 885Specialties Problems and Countermeasures in Higher Vocational Road and BridgeEngineeringZ.G. Ruan and Y.X. Ren 889Prediction of Land-Use Change along the Urban Rail Transit Based on Markov ModelT. Gao, J.J. Huang, H. Zhou and Y.J. Zhan 894Analyze the Seismic Attributes in HSX Volcanic Fracture Based on Forward ModelingY. Wang 899Analysis of Vegetation Cover Changing Trend in Pearl River BasinJ.L. Jing and Y.F. Wang 903Design and Build of Teaching and Experimental Marine Cold StoreC.W. He, M. Zhang, X.P. Jia and Y. Liu 907Research on the Energy Saving Technical Reconstruction and Development of Semi CokeIndustryL.L. Chen, S.H. Xu, Q. Li and K. Ma 912Analysis of Synergies among the Ecological Factors of Farmland in a TownshipY.H. Li, D.Q. Li and J. Wu 916Research to the Central Heating Boiler Room Energy Saving Index Evaluation SystemJ.F. Qi and X.P. Xiong 921

Applied Mechanics and Materials Vols. 556-562 i

A Temporal-Spatial Simulation and Dynamic Regulation System of Water Quality onSudden Water Pollution AccidentsB. Zhang, S.H. Yang, Q.T. Hao and C.H. Yu 925The Ice Disaster Forecast of Yellow River Based on Wireless Video Monitoring TechnologyY. Deng and B.S. Zhang 929The Polarization Properties Research of Atmospheric Based on Actual Weather ConditionsF. Zhang, X.P. Du and S. Wang 933Heavy Oil Distribution and its Influence on Remaining Oil Distribution of G6 Block inJinhu DepressionX. Li, J.R. Xu and J.L. Zhang 937Application Research on Groundwater Circulation Exploration Based on Fluent SimulationM. He, J.J. Jin and P. Liu 940Environmental Noise Source Identification Based on Sound Pressure and Sound IntensityIntegrating TechniquesK. Chang, J.W. Wang and X.L. Yu 945A Method Based on Remote Sensing to Look for Grey Haze Emission Source AreaC.L. Zhao, J.H. Fan, H.Y. Dong and J.H. Li 950Experimental Study on Shear Strength of Alfalfa Grassland at High Soil Bulk DensityJ.Z. Zhang and D.C. Wang 956Design and Implementation of Remote Sensing Extraction System of Rural CirculationLandP. Cheng, H.R. Wu and H.J. Zhu 960Effects of the Type of Cement and the Concentration of CO2 on the Carbonation Rate ofPortland MortarsS.T. Pham and W. Prince 965Effects of High Temperature on the Microstructure of Cement MortarS.T. Pham and W. Prince 969The Sacrificial Anode Cathodic Protection of Reinforced Concrete Structure in the SplashZoneS.L. Li and J. Zhao 973Study on Design Method for Asphalt Overlay on Old Cement Concrete Pavement in ShanxiProvince on Trunk HighwayH. Wang and J.P. Zhang 977Analysis Dynamic Response of Pile-Soil-Water Coupling of Large Span Cable-StayedBridge in Multipoint ExcitationX.M. Li 984

Chapter 3: Researches in Applied Mechanics and MechanicalEngineering

Application of Aerodynamics in the Automotive RepairZ.J. Chen 991Static and Dynamic Finite Element Analysis of the Whole Ship Structural of InlandWaterway Bulk CarrierL. Deng, F.Z. Song, M.M. Li, B. Song and Q.L. Shu 996Comparative Study of Ring Spinning and Compact SpinningJ.M. Lu 1001Discussion on Weft Insertion Processing Parameters of Air-Jet LoomJ.M. Lu 1005Connecting Rod Machining Process ImprovementD.Y. Sun 1009Effect of Rotary Partition DPF Structure on its Regeneration Characteristics withMicrowaveS.H. Wang, M. Xu and M.G. Yu 1013Simulation about Machining Deep Hole in SheetX.C. Xu, F. Guo, F. Qiu and X.K. Xin 1017

j Mechatronics Engineering, Computing and Information Technology

Multi-Objective Optimization Design of the Helical Cylindrical Gear Transmission Basedon ISIGHTJ. Chen, L.L. Yang and Z.Y. Wu 1021Study on Processing Technology of Turbocharger Impeller and ShaftL.G. Qu 1026Finite Element Analysis for the Upper Beam of 21MN Ceramic PressY. Pan 1030Research on Special Purpose Machine Tool Used for Ladder-Shaped Micro-HoleAutomation MachiningY. Zhou, X.D. Fu, P. Feng and C.C. Yang 1034Effect of Biomimetic Surface Morphology on Modal Properties of GearY. Lv, L.Q. Lei, L.N. Sun, X.F. Zhang and W.C. Xiu 1038Effect of Biomimetic Surface Morphology on Bending Fatigue Properties of GearY. Lv, L.N. Sun, X.F. Zhang, W.C. Xiu and L.Q. Lei 1042Finite Element Static Analysis of YP2080 Automatic Hydraulic PressD.Q. Lv 1046Finite Element Analysis of Grab Crane’s Metal ConstructionG.K. Liu, Y.J. Liu, F.J. Jing, B. Liu, H.F. Sun and L.C. Nie 1050Analysis of Y Type Branch Pipe Exhaust Ventilation Flow CharacteristicsS.W. Song, Z.P. Wang and C.S. Yang 1054Static Analysis and Modal Analysis of Heavy-Load Manipulator Based on ANSYSZ. Li, X.Z. Zang, L.C. Suo, Y.H. Zhu and J. Zhao 1059Simulation Study of the Electric Vehicle ChargerG. Zhao, X.M. Zhou and H.S. Sun 1065Localized Model to Segmentally Estimate Miles per Gallon (MPG) for Equipment EnginesJ.L. Luo, H.J. Luo, A.M. Li and H.H. Wang 1069The Design and Simulation of Diesel Engine Exhaust MufflerZ.H. Zhou, D.L. Chen, L.Z. Ji and S.P. Wan 1075Digital Conjugate of Tooth Surface of Logarithmic Spiral Bevel GearQ. Li and Y.L. Diao 1079Research on the Influence of NС Quick-Point Grinding Parameters to Complex RotatorSurface RoughnessK. Wang, W.C. Sun, F.M. Nie, Q.T. Wu, H. Wu and S. Li 1083Study on the Design of Venturi Scrubber on Metal MineS.B. Wang, R.H. Chen and X.Y. Meng 1087Calculation and Analysis of Minimum Turning Radius of Articulated Electric-WheelMaterial-Carrier Based on ADAMSS.L. Li and W. Xiong 1092Friction Type Monorail Crane Driving Design and Analysis Based on ANSYSW.W. Tu and H. Li 1096Structure Design and Optimization of 1500t Hydraulic Powered Experimental PlatformZ.Z. Sun, Y.L. Hu, F.W. Men and L. Ji 1100Research on the New Type Hydraulic Grilled Slag Machine Frame ProcessingH.L. Song, Z.B. Zhou, Y. Li, L. Chen and S.H. Zhang 1104Coal Mine Equipment Design Environment EvaluationP.H. Mao and S. Zhang 1108Structural Analysis of Unloading Frame of Mine Tubular Belt ConveyorQ.J. Ma, K.S. Wang and F.F. Li 1112The Design of Fast Roadway Drivage Support Work PlatformY.Y. Liu, X. Xu and H.C. Xu 1116Structural Strength and Modal Analysis of Heavy Truck Driving Axle HousingT.F. Ma and K.S. Wang 1119Improved Structure of Intermediate Shaft Device of JC-300 WinchH.B. Xie, C.K. Wei, H. Jiang and Y.L. Hu 1123Design of the Circular Cutting DeviceC.K. Wei, S.S. Tang and H. Yang 1126Four Freedom Pneumatic Manipulator DesignG.H. Wang, C.K. Wei and Z.Z. Sun 1129

Applied Mechanics and Materials Vols. 556-562 k

Simulation of New Wet Duster’s Nozzle Based on FluentS.S. Tang, K.S. Wang, C.K. Wei and T.F. Ma 1133Optimizing Parameter of Cutting Anchor-Bolt by Orthogonal ExperimentH. Jiang, C.K. Wei and Y.L. Hu 1136Design of Combined Switching Valve of High Pressure Abrasive Jet Mixing SystemL. Chen, C.J. Wang, H.L. Song, D.D. Han and J. Chang 1139Research Status and Development Trend of Vane PumpJ.J. Bai and M.M. Xu 1143Research on Dynamic Optimization Principles for Forklift Truck MastK.J. Zhang and J. Chen 1147Finite Element Analysis for Supporting Structure Based on COSMOSD.M. Yu, C.S. Li, D. Wang and X.J. Li 1151Foundry Technique Designing and Optimization of the Cast-Steel CastingB.F. He 1155Dynamic Simulation and Structure Optimization of the Folding Hoistable Mast Based onAdamsQ.S. Gao, H.T. Gu, Z.Q. Hu, R. Zheng and Y. Lin 1159The Method of Fillet Contour Error Compensation Applied in End Cylindrical CrankshaftGrinderM. Luo, L.Y. Chen and Z.C. Chen 1165Thermal Analysis Based on Finite Element Analysis for Motorized SpindleD.M. Yu, Y.H. Hu, D. Wang and X.J. Li 1170Structural Design and Finite Element Analysis for Planet Wheel Gear SystemX.J. Li, C.S. Li, D. Wang and D.M. Yu 1174The Analysis and Experimental Verification on Static Characteristics of BTA Deep HoleDrilling Based on Ansys SoftwareZ. Dong, X.Q. Shen and H. Zhang 1178Experimental Research on Preliminary Docking in Replenishment at Sea Using FlexibleManipulatorY. Yu, G.Z. Liu, B.L. Yin, B. Yu and J.J. Wu 1183Optimization Design of Muffler Based on the Theory of Orthogonal TestX.M. Xu, H. Jia, Y.P. Zhu and J. Shi 1191Nonlinear Dynamic Analysis of Low Pressure Rotor of High Parameter Turbine byImproved Segment Direct Integration MethodG.T. Shi 1196Modeling of Shield Machine Tunneling Experiment by Discrete Element MethodL. Wu and C. Liu 1200Air-Hydraulic Intensifier Equipment and Technology Research of ClinchingY.Q. Zhao, S.D. Zhao, F. Xu, X.L. Han and R.F. Zhao 1205Effect of Vibration Amplitude on the Friction of the Point ContactJ.D. Lu, L.H. Li and G.M. Zhang 1211The Optimization of Small End Bushings of Connecting-Rod in Heavy-Load Diesel EnginesS. Yin and W.J. Qin 1215Dynamic Simulation of Blanket Module Maintenance inside Fusion Vacuum VesselY.H. Zhu, L.M. Guo and J. Zhao 1220Singularity Analysis and Simulation of 3-PRRR Parallel MechanismY.Y. Zhu, T. Fu, H.S. Ding, Y.M. Wang and Y.J. Wang 1226Mechanics Analysis of Overhanging Submarine Pipeline Based on ANSYSY.Y. Liu, F. Li and X.T. Wei 1232Car Radiator of the Whole Simulation Based on CFDX.F. Pan and W.W. Cao 1236The Design and Application of the Mechanical Parts Based on the TRIZ TheoryS.Y. Liu 1241An Electric Vehicle (EV) Side Pole Collision Test ResearchH.T. Zhu, Y. Ji and Y.H. Zhong 1245Research on Vibration with Advanced Lubricants for ChillerH.H. Cui 1251

l Mechatronics Engineering, Computing and Information Technology

Extracting Parameter Matrix of Automotive Cable HarnessY.H. Gao, J.D. Zhang, T.H. Wang, K.Y. Yang, Z.Y. An and Y. Liu 1255The Structural Analysis of the RM80 Ballast CleanerM. Zhang, M.H. Liu and L. Jiang 1259Uniform Design on the Forward Annular Shaped Charge of Torpedo Tandem WarheadL. FU, W.L. Wang, Y.Z. Jiang, X.F. Huang and J. Lv 1263Research on Expert System of Bearing DesignX.M. Qian, L. Duan and C.C. Yi 1267Simulation and Analysis of Variable Valve System Based on Diesel EngineL. Yin, D.J. Zeng and Y.Z. Peng 1271Simulation and Analysis of Dynamic Characteristics of Rolling Motion of RotationalMolding ShipQ.G. Yao and Y.L. Liu 1278Study on Optimal Design of Ideal Steering Ratios Based on Genetic AlgorithmG.Y. Wang, J. Shi, G. Li and L. Huang 1282Vibration Signal Analysis of Bearing Based on EMD and Resonance DemodulationJ. Shi, X. Wu, N. Pan, S. Wang and J. Zhou 1286Design of a Preventive Clearing Blocked System Using PLC ControlX.L. Zhang 1290Study of Subdivision Stepping Motor Driver Based on the Controllable Dead-TimeCompensationC.Q. Zang, M.Y. Gao, Y.F. Liu and Z.W. He 1294Research on Computer System Dynamic Balance Technology for Cooling Fan of EngineZ.B. Sun 1298Reliability Assessment Calculation of the Automobile Transmission SystemX.H. He, G.W. Zhang, G.P. Liu and L.Y. Xie 1302Directional Stability Study of Torpedo AnchorsD.Y. Li, P.F. Ke, L.J. Ou, X.Q. Xing and S.W. Liu 1310Numerical Analysis for Braking System of Virtual Automobile ModelD.M. Yu, X.J. Li and D. Wang 1314Research on Clinching with AC Servo Direct-Drive DeviceX.L. Han, S.D. Zhao and F. Xu 1318Design of the Tracked Vehicle Based on the STM32W. Li, S.Y. Sun, J.Y. Liu and B.Q. Cao 1323The Prediction of Surface Roughness of Parallel Machine Tools Based on the NeuralNetworkC.L. Zhao and X.S. Guan 1328Design of Data Acquisition System in Friction Wear Testing Machine Based on VirtualInstrument LabVIEWL.X. Wang, L.G. Zhai and Y.Y. Gao 1332Modeling of the Radiation Properties of Flow around the Hypersonic AircraftsY.S. Zhao and X.P. Du 1338Model and Control Algorithm of Thread Rolling MachineZ.Y. Xu and D.L. Guan 1342Free Form Shape of Machine Parts Design Based on Microcomputer CAD/CAM SystemL. He 1346The Automotive Brake Reaction Model Analysis under Moods FluctuationL.J. Cheng 1350Mathematical Model for the Influence of Machine Tool Parts Deformation on MachiningAccuracyL.G. Cui, G.Q. Liang and F. Shao 1354Design and Simulation of Pedal Simulator in Brake by Wire SystemW.B. Zhu, F.Z. Ji and X.X. Zhou 1358Design and Simulation Research on a New Type of Movable Wedge – Ball OverrunningClutchP. Wang, P.K. Li and L.L. Kong 1362

Applied Mechanics and Materials Vols. 556-562 m

Research on Comparison of Bidirectional Engaging Characteristic of a Novel TypeSeparable-Control Overrunning ClutchP. Wang, P.K. Li and L.L. Kong 1367Research on the Yaw of 2 DOF Articulated Vehicle Obstacle NegotiationW. Kou and X.H. Liu 1372The Motion Characteristics and Pressure Analysis of Drive System of Monorail CraneY. Chen, W.P. Wei and Q.P. Gao 1377Structural Analysis of Transmission Frame of Coal-Mining Tubular Belt ConveyorX.X. Li, Q.J. Ma and Z.H. Wu 1380Application of Pre-Mixed Abrasive Water Jet to Quit Anchor UndergroundF.W. Meng, Z.Z. Sun and Y.L. Hu 1384Servo Drives’ Reliability Prediction Based on Analytical MethodW. Mi and Y.M. Yan 1388Analysis and Research of Automotive Brake Performance Based on MATLABC. Zhao 1392Comparison of Control Methods of Permanent Magnet Synchronous Motor in ElectricVehicleZ. Gang and H.J. Wang 1396Tool-Path Scheduling for Free-Form Surface Based on MasterCAMW.J. Ren, J.Y. He and Y. Yu 1400Analysis of Halbach Permanent Magnet Synchronous Motor with Ironless Rotor Based onAYSYSH.M. Zhang, L.S. Peh and Y.H. Wang 1404The Research and Simulation Analysis of a New Type of Translational Transmission DeviceZ.Q. Zhang 1408Study on an Acc/Dec Method Based on Moving Average Technology for CNC MachineToolsT.X. Hu, L.B. Zhang, T. Wu and F.L. Huang 1413Tire Crushing Equipment Hydraulic Workstation DesignY. Liu and K.L. Yu 1417Numerical Simulation on the Flow Field of External Gear Pump Based on FLUENTA.F. Guo, T.T. Jiang, T. Wang, Y.P. Hu and D.J. Zhang 1421Kinematics Simulation of a New CVT Based on Virtual Prototype TechnologyQ.D. Zeng and F.Z. Tan 1426Study of Optimized Determination Method of HEV Engine Based on the High FrequencyWorking Area of EngineG.P. Wang, Q.N. Wang, P.Y. Wang and F. Li 1430Wheel Dynamic Load Optimization of In-Wheel Motorelectric Vehicle Based on ResponseSurface MethodD.F. Wang, T.Z. Shi, Z.X. Deng and H.L. Dong 1435The Design of an Electromagnetic Valve Actuator (EMVA) Suitable for Scavenging Two-Stroke EngineY.N. Hu, J.Y. Ma, S. Jia, B. Yang and Q.F. Hou 1441Optimization Design of EMU Process Bogie Wheel Frame Based on ANSYSJ. Dai 1446Research on Straw Returning and Fertilization SeederX.C. Lu, S.F. Chen and J. Yang 1450The Achievement of Intelligent Lubrication Adjustment Function of CNC Machine ToolsBased on SSASD.S. You 1454The Design of a New Type of Spindle Vibration Test DeviceF. Dong, J.C. Yang, T.Z. Gao, Y. Xie, L. Guo, H.Y. Zhang, S.M. Hu and G.Q. Zhou 1460Physical Simulation Experiment Research of Steam and Gas Assisted Gravity DrainageL.G. Zhong, Y.C. Wang and Y.Q. Zhang 1464Simulation on Influence of Two-Stage Warhead Penetration at Different Obliquity AnglesX.F. Huang, W.L. Wang, L. Fu and Y.Z. Jiang 1468

n Mechatronics Engineering, Computing and Information Technology

Energy Management System Optimal Strategy for Pure Electric Vehicle Based on theDynamic ProgrammingB. Dong, Y.T. Tian and C.J. Zhou 1472Design of the Portable Abrasive Water Jet Rescue and Fire-Fighting DeviceY.L. Hu, Z.Z. Sun and H. Jiang 1476

Chapter 4: Power and Electric Research, Electronics andMicroelectronics, Embedded and Integrated Systems

Design of Quasi Free Surface Secondary Optical Lens for LED Auto TaillightsK. Wang and J. Li 1483The Analysis of Some Problems of Environmental Stress Screening of Electronic EquipmentX.J. Song and W.L. Li 1487Design of Resistance Touch Screen Based on S3C6410 Embedded SystemY. Wang, R.B. Ge and M.H. Li 1491Digital Generator Solution Based on TMS320F28027J.Y. Li and H.L. Zhang 1495Three Dimensional Radiation Feature Calculation for Terahertz Photoconductive AntennaBased on FDTD MethodF.Y. Lian, G.F. Jin and M.X. Fu 1499A Frequency Tracking Adaptive Power Line Interference Canceller for ElectrocardiogramB.J. Wang, Y. Men and G. Zheng 1506Improved Apriori Algorithm in the Power System FaultL.Q. Lin and H.W. Yan 1510Design and Implementation of Data Acquisition System Based on FPGA and High-SpeedADZ. Li and D.H. Chen 1515Design of Switching Power Supply in High Performance SwitchesA. Liu, H. Zhang, W. Yang and S.X. Cao 15202-D DOA Joint Estimation Method Based on Polarization ArrayY.L. Ye 1526Analysis of Electrical Field of Overhead LineJ. Zhou, X.L. Tan and W.B. Wang 1530Analysis of Inverter Based on SCR and PWM ComparationJ. Zhou, X.L. Tan and W.B. Wang 1533Analysis on Energy Loss of SVC Based on TCR and FC Mode MethodJ. Zhou, X.L. Tan and W.B. Wang 1537Research of Single Phase APFCJ. Zhou, X.L. Tan and W.B. Wang 1541A Novel Multimedia Player Based on Embedded SystemX.C. Zhou and H.W. Yu 1545A High-Speed 64b/66b Decoder Used in SerDesB. Wang and Q.S. Hu 1549Design and Implementation of a Compact Integrated Navigation System for Micro Multi-Propeller Multifunction Aerial RobotsC.L. Zha, X.L. Ding, Y.S. Yu and X.Q. Wang 1553Selecting Optimal Reactive Compensation Device for Power SystemT.T. Ngoat, X.M. Zha and L.N. Giang 1560A 520MHz Wideband Variable Gain AmplifierJ.Z. Zhang 1564The Development Research of Solar Energy Power Supply DevicesH.D. Guo, Y.N. Xue, Y.M. Liu, X.D. Mi, J.Z. Yan and X.H. Du 1568Analysis and Suppression of High-Frequency Harmonics of High Power PhotovoltaicInverter SystemP. Deng, Y.X. Yuan, L. Yuan, P. Kuang and J. Chen 1573

Applied Mechanics and Materials Vols. 556-562 o

Research of Chip Placement and Routing Algorithms for Board-Level PhotoelectricInterconnectionJ. Liu and Z.H. Wu 1577Investigation of Phase-Shifting and Frequency Conversion Sinusoidal Signal GeneratorBased on DDS and FPGAX. Han, P. Wang, S.S. Li and X. Zhao 1580Behavior of Electric Vehicles Charging and Discharging and Impact on the GridS.J. Song and X.H. Wang 1584Lightning Overvoltage Analysis and Calculation of 330kV Overhead Transmission LineX.B. Zhang, D.J. Wen, Y.M. Sun and H.G. Chen 1588Design of Door Monitoring Interface Based on Qt4 and SQLiteC. Xie and S.J. Song 1592A Design of CPPLL for CMMB Broadcasting SystemX. Wang and Z.B. Zeng 1597A Design of Novel Intelligent System of Single Phase Electric Meter for BuildingK. Song and X.H. Cheng 1601Design and Implementation of Intelligent Multi-Serial Ports Data Transmission SystemBased on NIOS II Using in Smart HomeS.S. Zhang and C. Chen 1605Power Control of a Photovoltaic Generation System Using Rough Fuzzy-PID TechniquesA.M. An, L.W. Chen and H.C. Zhang 1610Research and Application on Successive Action Zone and Dead Zone of TransverseDifferential Protection in Parallel LinesN.N. Gao, Y. Pei, J. Zhan, H.B. Li and L. Niu 1614A New Radar Signal Processing Architecture Based on Multi-Core ProcessorJ.L. Fan and Q. Yang 1618Clock Domains Cross FIFO Interface Design of Multichannel Continuous DDR2 Read andWriteG.C. Wang, Y.P. Ma, H.T. Lu, X.Q. Chen and P. Li 1622Implementation of Monitoring Program of PC and Android Device for the Hybrid SystemConjugated with Solar Cell and Fuel Cell of 9kW ClassW.J. Ryu, S.H. Lee, K.Y. Kim, T.A. Nugraha, S.Y. Shin, S. Chae and Y.H. Kim 1627Multi-Group of Dual-Frequency Pulse Waveform Design for Anti-Range Eclipse of HighPRF PD Guidance RadarB. Zhao and Z.F. Wang 1631Research on Unequal Grouping of Parallel Compensation Capacity in SubstationS. Cao, Y.Q. Ji and G.F. Geng 1636Active Power Optimization Considering both Generation Cost and Network LossX.F. Chang, X.Y. Lv and D.X. Li 1643Using Hybrid Type SFCL to Limit the Surge Current Caused by Closing Loop Operation inDistribution SystemZ. Li, L. Chen, W. Yang, C.H. Deng and H. Liu 1647Design of Data Acquisition and Storage Circuit Based on Linear Array CCDJ.H. Zhu, S.P. Yang and M.F. Gao 1652Research on Annual Operation Mode and Intelligence Aided Design System of PowerCommunicationS.W. Wang, X. Li, C.Y. Wang and X.J. Shu 1656Dead-Time Compensation of SPWM Based on STM32F103S.E. Zhuang, M.Y. Gao, X.X. Zhan and L. Wang 1660Research on Statistics & Analysis Evaluation Method of Electric Power CommunicationEquipmentS.W. Wang, X. Li, C.Y. Wang and X.J. Shu 1665Surface Vertical Alignment Effect on the Morphology of Liquid Crystal Optical DevicesW.C. Li, S.W. Wang, L. Sheng and N.N. Zhang 1670The Classification of Grounding Method on the Low-Voltage Distribution SystemC.L. Liu 1674Optimal Design of Battery Energy Storage System for Micro-Grid in Island ModeH. Pan, C.H. Deng, J. He, Z.K. Wu and F. Guo 1678

p Mechatronics Engineering, Computing and Information Technology

Orthogonal Pulse Design Based on Sinusoidal and Cosinusoidal FunctionsH.J. Zhou, Z.Y. Zhao, X.G. Liu and Z.Y. Mao 1683Research on Response of Log-Periodic Antenna (LPDA) to Square Wave Pulse in GTEMCellX.N. Sun, Q.G. Wang and X. Zhou 1687Two-Dimensional Numerical Study on Characterization of Low-Pressure CapacitivelyCoupled Argon DischargesY.C. Zhang, X. He, J.P. Chen, X.W. Ni, J. Lu and Z.H. Shen 1691Dynamic Condition Assessment of Electrical Equipments Based on Markov PredictionJ.S. Li, J. Liang, Z.H. Yun, L. Zhang and F. Zhang 1696Design of Program Controlled Function Signal Generator Based on LPC2138W.Q. Cheng, Y.J. Guo and B. Wang 1700A Nested Folded 4f System for Ultra-Short Optical Pulse Shaping by Liquid Crystal SpatialLight ModulatorF.Z. Duan, X.H. Yang, Y.M. Nie and J.L. Qi 1704Research on Reduced Scale Experiment of Induced Overvoltage on Distribution LineY. Huang, B. Tang and Z.Q. Yu 1708The Research of the Photovoltaic DC Grid-Connected Converter Applied in Flexible DCGridC.B. Ju, H. Wang, W. Feng and H.H. Xu 1712Research of Photovoltaic Charging System with Maximum Power Point Tracking Based onDSPY.Z. Zhao, Q. Liu and Q. Zhang 1716Graph-Based Temporary Ground Wire Management in Distribution NetworkX.Y. Fu, C. Zhang, S. Gai, W.H. Liu, Z.Y. Ni and S.P. Zhao 1720The Test Equipment Based on Single Chip Micro (SCM) of Volt-Ampere Characteristic ofCTB.F. Liu and Y. Gao 1726Regular Expression Matching Algorithm Based on FPGA CircuitC.Q. Guo and J.F. Xu 1730Design and Implementation of the Multi-Functional Virtual Instrument Based onLabVIEWX.W. Duan and H. Sun 1737Research of a Mixed-Signal Programmable SoC Based on FPAAJ. Deng, H.Y. Tan, L.C. Liu and L.T. Liu 1741Simulation Analysis of Excess Noise Factors for Photomultiplier TubeS. Wang, Z.Y. Zeng and F. Zhang 1745The Analysis of Implement of SiPM in LDRI SystemY.S. Song, W. Cai and X.P. Du 1749Control Strategy of Low Voltage Ride-Through for Grid-Connected Photovoltaic PowerSystem Based on Predictive CurrentM.G. Zhang and X.J. Chen 1753A Kind of Embedded Firewall Mechanism for ARM ProcessorsW.Q. Xing, Q.Z. Zhang and Z.W. Feng 1757Research on Broadband Power Amplifier Adaptive Digital Pre-Distortion Based on FPGATechnologyY.S. Xiong and S.Y. Ran 1761A Q-Learning-Based Downlink Power Control Algorithm for Energy Efficiency in LTEFemtocellsL.F. Huang, B. Wen, Z.B. Gao, H.X. Cai and Y.J. Li 1766Design and Research on a 24GHz Microstrip Array AntennaY.J. Li, B.Q. Li and Q. Zhang 1770Analysis of Switching Power Supply OptimizationX.L. Tan, J. Zhou and W.B. Wang 1775Analysis on Suddenly Stop Running Effect of Wind Turbine in Power SystemX.L. Tan, J. Zhou and W.B. Wang 1779Research of Harmonic Reuse by Fundamental Resonant MethodY.Q. Yao and W.B. Wang 1782

Applied Mechanics and Materials Vols. 556-562 q

Research of Stabilization of Voltage in Substation Based on SVC in TCR and FC ModeX.L. Tan, J. Zhou and W.B. Wang 1786Study on Main Circuit Mathematical Model and Control Method of Advanced Static VarGeneratorC.M. Zha and J.Y. Xu 1789Electromagnetic Compatibility of PCB Based on Electromagnetic Simulation MethodsZ.T. Yao and J.J. Ge 1794Study on Compressing Data for Three-Phase Power Based on Adaptive Two-DimensionalWavelet PacketM.J. Liu, X. Zhang, Z.L. Bai and M.H. Gu 1798The Researching of a Power Supply Design Scheme for T/R AssembliesW.C. Wang and J.C. Zhao 1802Design of High-Power LED Drive Circuit with Economical High Power Factor Based onNCP1200L.T. Wang and Y.G. Jin 1806Research on AC Electronic LoadX.F. Yan, C.Q. Zhu, Y.F. Zhao and Q.J. An 1811Research on Microgrid Frequency Control With Droop Characteristic Based on LagrangeInterpolationJ.M. Li and P. Li 1814Design of Wind-Solar-Diesel-Battery Hybrid Power SystemW.L. Hu, R.S. Yang and P. Xie 1818The Analysis and Suppression of Harmonics on the AC Side of HVDC Transmission SystemZ.R. Liang and M.Y. Zhao 1822Novel Optimal Configuration of Multiple Hybrid Energy Etorage Combained with WindFarm in Smart GridJ.M. Li and P. Li 1826Optimum Design and Simulation on Conductive RingJ.C. Yang, Z.H. Yao and X.G. Wang 1830Optimal Load Scheduling in Smart Grid Considering Environmental FactorsJ.M. Li and P. Li 1834Implementation and Application of Short-Time Fourier Transform on a New High SpeedFPGAG. Gui and L.P. Qiu 1838A Low-Cost Low-Power Capacitive Humidity Sensor in CMOS TechnologyF.M. Deng and Y.G. He 1842A Capacitive Humidity Sensor for Low-Cost Low-Power ApplicationX. Wu and F.M. Deng 1847The Research of the Electric Vehicle Wiring Harness Dynamic Crosstalk Based onStatistical Simulation MethodT.H. Wang, Y.H. Gao, K.Y. Yang, J.D. Zhang, L. Gao and Y. Jin 1852Research on New Type Magnetohydrodynamic Ocean Wave Energy Conversion SystemZ. Wang, Y.G. Li, S.M. Wang, Q.Y. He and J. Zhang 1856Study of Selecting RO Scale Inhibitors Based on the Conductivity Titration CurvesS.F. Zhang, H.L. Liu, D.D. Xi, L. Yang, M.S. Hu, M.D. Li, J. Liu, J.Q. Wei, Y.C. Yu and B.Q.Zhou 1860Design of a Magnetic Gradient Coil with High UniformityD. Jin, D.F. Cheng and Y.Z. Wang 1865Study of the Influence of the Electrocoagulation Unit on Activated Sludge in MembraneBioreactorH.F. Zhang, Z.Y. Gao and L.H. Zhan 1870Simulation of VLF CSS System in Atmospheric NoiseG. Fu, Y.J. Wu and Q. He 1874Analysis of Electric Vehicle Battery Charging and DischargingZ.C. Tang, C.L. Guo and D.M. Jia 1879Research of Control Method in Multi-Working Condition to Charging and Dischargingunder Multi DC/DC ModulesD.M. Jia, C.L. Guo and Z.C. Tang 1884

r Mechatronics Engineering, Computing and Information Technology

Simulation and Optimization of Muffler Based on GT-PowerM. Yu and S.L. Yuan 1889Performance Study of GaAs Photovoltaic Power Converter in Optically Powered SystemsX.W. Yuan and J.Q. Shi 1894Application of Negative Resistance in the Inductor Feedback Oscillators Based on MultisimY. Lei and J.F. Ai 1898The Effects of Voltage Level Number on Operation Characteristics of Modular MultilevelConverterJ.L. Li, H.F. Li, C.R. Liu, G.Y. Li and Z.H. Lin 1902Design and Implementation of the Radio & TV Transmitting Station MISY.F. Zhang and Y.H. Ji 1909Study on Matrix Converter Direct Switching Function Modulation AlgorithmJ.W. Liang, T. Wang, C. Zhang and D. Chen 1913The Assignment Technology Research of Arbitrary Pole for Second-Order Control SystemY.M. Li 1917The Transient Effectiveness Research of Ultra-High Voltage Short Tripping Fault to LargeRegion Grid Based on Hybrid SimulationW.J. Zheng, B.Q. Li and G.S. Chen 1921Design of Spectral Acquisition System Based on the Linear Array CCD ILX554BM.F. Gao and S.P. Yang 1926A Simple Method for Power System Harmonic AnalysisY.D. Song and C.M. Yang 1932Applications of Two Level SVPWM in the Cascade Multilevel Carrier-Based PWMZ.M. Liu, Z.Q. Xi and C.G. Yu 1939Study on the Specific Harmonic Suppression of Active Power FilterX. Rui, Z.Q. Xi and M. Zhou 1945Speeding up Based on the Process Optimization of High Voltage Business ExpandingJ. Li and H.Y. Jiang 1950Analysis of Theory and Model of Background Magnetic Field of High-Spinning ProjectileK.Y. Qi, C. Xiang, X.Z. Bu and J. Yu 1954Design and Simulation of Breaking Time Sequence for DC Circuit Breaker with a Current-Limiting InductanceS.M. Wei, Y.G. Zhang, H. Liu, Z.Q. Dai and X. Du 1959A Wind Power Forecasting Method Based on Improved Support Vector MachineH.C. Ke, H. Wang and D.G. Kong 1964Heat Transfer Enhancement by Ultrasound Pressure Waves in Liquid Water: A CoolingMethod for New Electronic ComponentsC. Bartoli, F. Baffigi and A. Brunini 1968Design of Program about the LED Digital Clock Based on Atmega16 Microcontroller andDS1302M.C. Zhang 1975The Design and Implementation of Zero-Angle Memory Device about the Radar of Ship-Borne Based on Proximity SwitchQ.Q. Ding, M. Tao and Y.X. Jia 1979Development of the Mobile Power Supply System with Stabilizing Voltage and Frequency,UPS, Intelligent ChargingB. Zhou, J. Chen, Y.F. Wang, Y.X. Yuan, L. Yuan and P. Kuang 1983Audio Decoding Chip in the Application of Embedded SystemY.H. Gao and X.F. Suo 1987Design and Realization of the Explosion-Proof Three-Level Frequency ConversionEquipment for Coal MineW.T. Lu, Z.Y. Li and H.J. Zhu 1994Research on EMC Evaluation of Shipborne Electronic EquipmentJ.Z. Mao, Y.H. Wang, N. Si and H.C. Xia 1998Research on Heat Transfer by Fluid in Winding Region of Power TransformerY.M. Xu, F.F. Wang, M.M. Ai and Q.M. Yu 2002Study on Reverse Charging of Stored Energy Capacitor in Pulsed Power Supply SystemJ.B. Liu, L.P. Bu and X.X. Qin 2008

Applied Mechanics and Materials Vols. 556-562 s

Research on Active Equalization of Lithium Battery via SOCY.G. Wang, Z.F. Wang, J.L. Huang and L.G. Li 2013Dynamic Mathematical Model of Variable Pitch Double-Fed Wind Power GeneratorZ.J. Wang, S.M. Liu, X. Sun, X.X. Su, L.J. Chen and Z.Y. Pei 2017Research on IEC Type3 Wind Turbine GeneratorX.S. Han and Q.H. Liu 2021The Design and Manufacture of the LED Acousto-Optic Game BoxH. Song, Y.W. Liang and Z.T. Wang 2027Performance Simulation Analysis of Contactless Excitation Energy Transmission Realizedby Loosely Coupled Magnetic Tank TransformerJ.F. Liu, X.D. Wang and Y. Yu 2031The Electricity Performance of Flexible Piezoelectric GeneratorG.H. Liu, L. Sui and G.C. Shi 2035BLDCM Commutation Torque Ripple Strategy OptimizationX.F. Wang and W. Lin 2039Research on Calibration Method of Three-Phase Smart MeterY.J. Wang, H. Zhang and J.R. Wang 2043Study on Shortwave Circular Adaptive Anti-InterferenceL. Yin, Z.G. Zhang and F. Yuan 2049Research on the Charge and Discharge Control of the High-Capacity Lithium Battery Usingin Escape CapsuleM.S. Ouyang and Q.T. She 2054Analysis of Two-Phase Operation Mechanism of Three-Phase Motor Based on CapacitorPhase Shift MethodY.P. Huang, Y. Zhong, Z.P. Zheng, Y. Xu and H.X. Wu 2058Research of PFC Based on Boost ConverterX.L. Tan, J. Zhou and W.B. Wang 2063Multi-Objective Optimal Power Flow with Transient Stability ConstraintsJ.L. Lu and Q. Zhang 2067Analysis of Random Vibration Fatigue Life Based on Fluctuation Wind for AntennaStructureQ. Gong, Y. Li and D. Su 2072Analysis and Optimization Design of DRX Mechanism for Power Saving in LTEX. Yu and Y. Song 2076The Design and Realization of OBU in Free-Flow ETC SystemC.J. Yan, J.X. Guo and X.Y. Li 2081The Design and Application of Intelligent Socket in the Smart Home SystemK. Liu and Y.C. Qi 2085Simulation of Tracking Control Modeling of the Photovoltaic System with Maximum PowerP. Xie, W.L. Hu and Z.C. Liu 2089Simulation and Optimization Design of the Heat Waveguide Optical Switch on Non-FourierHeat Conduction TheoryJ.Y. Song, X.M. Zhang, Z.X. Chu and L. Zhang 2093Shottky Contact Device Based on a Single WO3 Nanowire for Ultraviolet PhotodetectorJ.H. Wan, K. Huang and L. Wan 2097Simulation and Research for Gas Boiler Based on the Vague Set PIDG. Zhao and J. Li 2101The Simulation Study of Direct-Current Control Technology for Three-Phase Voltage TypeRectifierR. Jun 2105Monitoring Mechanical Vibration Amplitude System Design Based on the PVDFPiezoelectric Film SensorJ.L. Zhu and L. Li 2110Dual-Current Loops Control Strategy of PWM Rectifier under Unbalanced Grid VoltageConditionsY.F. Ni and Y.Q. Zhu 2114The Improvement of Several Power Units of 24 Multi-Station Pen MachineL. Jiang, Y. Zhou and C.C. Yang 2119

t Mechatronics Engineering, Computing and Information Technology

The Simulation of Distribution Parameter of the Three-Phase D-Dot Voltage SensorL.Y. Zhu, J.G. Wang, Y.Y. Fan and Y.J. Bai 2123The Study on 45KW Range Extended Electric Vehicle Auxiliary Power UnitY.L. Guo, X.D. Wang and J. Long 2128Study on Mercury Emission Control of Dust Removal System for 300MW Coal-Fired UnitsF. Wang, J.W. Zhu, Q. Cao, X.F. Wang, F. Zhang, Y.R. Li and H.M. Wang 2133The Research on the Winding Deformation Testing System for 10kV Transformer Based onthe LabVIEWH.S. Yang, L. Liu, C.J. Shi, T. Chen and Y.B. Wang 2137Dark Current Model of Quantum Dot Infrared Photodetectors Based on the Influence ofthe Drift Velocity of the ElectronsH.M. Liu, C.H. Yang and Y.L. Shi 2141Design and Implementation of Data Management System for Low-Voltage ElectricalPerformance Test Based on Virtual Instrument TechnologyW. Xu, Y.H. Zhao, M.Y. Liu, M.X. Dai, Q. Xie and H.G. Xu 2145Fault Diagnosis of Analog Circuits Based on Evidence TheoryC. Cheng 2149A New Design of Laser Driver Circuit Controlled by ARM Used in a Gas Detection SystemBased on TDLASY.J. Guo, W.Q. Cheng and B. Wang 2153A New Power System Fault Diagnosis Model under UNIX PlatformL. Wang, Q. Chen, Z.J. Gao, B. Chen, M.W. Chen, K.M. Sun, D.J. Wu, S.T. Wang, Y. Pei andJ.W. Zhao 2157Design of a Digital Breathing Rate Tester CircuitH. Li and L.F. Lin 2161Design and Implementation of TT&C System Downlink Signal SimulatorG. Fu, Y.J. Wu and Y. Feng 2165Electric Vehicle Battery Pack Voltage Detection Circuit and its Error ResearchY.M. Wang, L. Li, G.L. Lu, C. Li and S.P. Tian 2169Study on the Application of CSAMT in Geothermal Exploration in Jilin ProvinceC.P. Wu, X.P. Zhang, L.Z. Du and Y. Wang 2174The Measurable Device of Even Voltage on the Basis of Single Chip Micro ComputeY. Gao and B.F. Liu 2178Argument Forbuilding Feasibility of the General Electrical Parameters Test Platform forSmart AmmunitionsX.G. Zhang and L.T. Xu 2182Experimental Study on Transformer under DC BiasY. Hu and H.Q. Li 2186Transformer Excitation Characteristics Research under DC BiasY. Hu and H.Q. Li 2190Design of the Ka-Band Satellite Antenna by Parallel Differential EvolutionJ.C. Guo, X.Q. Liu, W. Zhang and B.Q. He 2194Study on Electronic License System and OperationQ. Dang, X.W. Wang, J.L. Guo and X.S. Tong 2198Two-Band Antenna Reflection Board Using Multi-Layer Mush-Like EBGQ.F. Zhao, S.L. Wang and N. Guo 2202Design of Swimming Pool Temperature Dot Matrix Screen DisplayX.F. Yang 2208The Principle and Application of TMSG.Z. Liang, L. Liu and Q.M. Zhu 2212

Chapter 5: Mechatronics, Automation and Control

Wireless Control of Mobile Robot Technology Research Environment under LinuxL. Xu, Y. Song and L. Mao 2217Study on Streaming Media Tentative Rate Control Algorithm Based on TCP-FriendlyP. Xu and Z.C. Yu 2221

Applied Mechanics and Materials Vols. 556-562 u

Reliability Design of Ship Main Engine Remote Control System Based on Single ChipMicrocomputerQ.G. Yao and Y.L. Liu 2225The Hardware Design of Control System of Coal Mine Detection Robot AC Servo DriveZ. Liu 2229Reliability Test and Analysis of Electrical Automation Control EquipmentM. Li 2233Automatic System Design for Cheque Discrimination Based on OCR TechniqueJ. Li and Y.R. Yang 2237Research of the Industrial Furnace Temperature Control Based on DMC AlgorithmZ.Y. Meng, C.M. Sui and L. Liu 2240Research of Control System of Variable Frequency MotorJ. Zhou, X.L. Tan and W.B. Wang 2244Simultaneous Localization and Mapping for Robot Based Multi-Agent SystemX.K. Leng, X.W. Wang and S.H. Piao 2248Design and Application of PWM Digital Controller Based on FPGAS.L. Liu and X.Q. Xu 2252Development of Stamping Process CAD System on Automatic Production Line for RoboticManipulationQ.X. Cao and X.T. Xiao 2256Fuzzy Self-Tuning PI Control for the Upper Limb Rehabilitation RobotY.D. Cui and C.H. Xiong 2262Conjugate Unscented Particle Filter Based Monte Carlo Localization for Mobile RobotsJ.X. Fei and S. Yu 2266Sensorless Control for PMLSM Based on Fuzzy Sliding Mode ObserverH.C. Lu, J. Ti, Y.M. Yuan and L.S. Wei 2270Application of High Frequency Signal Injection Method in PMSM Control Using FuzzyKalman Filtering AlgorithmG.L. Che and H. Lai 2274Improvement of Attitude Estimation Using Modified Rodrigues Parameters and IntelligentControllerQ. Liu, F.Y. Gao, C.G. Wang and Y. Han 2279Adaptive Congestion Control with Time-Varying UncertaintiesC.W. Han, D.H. Sun and L. Liu 2285Adaptive Control for Discrete-Time Systems with Time-Varying DelayC.W. Han, D.H. Sun and S. Bi 2289Study on Fuzzy PI Control of Vehicle Yaw Moment Based on Optimal Allocation ofBraking ForcesG. Li, H.L. Han, C. Wang and G.F. Ma 2293FPGA-Based Dual-Probabilities CSMA/CA Control System DesignZ.G. Liu, H.W. Ding, X.H. Ma, Q.L. Liu and J.L. Xiong 2297Design and Simulation of Automatic Transition Control System for Helicopter Based onModel Reference AdaptiveY. Liu 2301Intelligent Control of the Dynamic Tension of Yarn by Means of Sensors in WindingProcessY. Tong 2305Design of the Automatic Shell Production LineH. Zhang and L.T. Zhang 2309Research on Loading System of Landing Gear Turning Test Based on Single Neuron PIDControllerY. Ling 2313The Research of Flux-Weaken Control about IPMSM of the Electric CarsJ.G. Song, Q.L. Zhang and P.F. Xie 2317The Remote PLC Control System Based on the Embedded Web ServerS.P. Xu, J. Li and Y.F. Zhao 2321Avoiding Obstacle Control of Mobile Robot Based on Artificial Potential Field MethodJ. Wang 2325

v Mechatronics Engineering, Computing and Information Technology

Prediction and Control the Vibration of Deep Hole Processing SystemY.L. Li and X.Q. Shen 2329The Reliability Analysis and Simulation Method of Train Control System Based on MarkovS.G. Wei, J. Xiao, B.G. Cai and J. Wang 2333The Mathematical Models and Simulation on Work Roll Bending Control System of ColdRolling MillY.P. Wang, X.B. Yang, Y.H. Jin, B.Q. Liu and J.S. Wang 2337Position Servo Control Technology Based on Sliding Mode Variable Structure forPermanent Magnet Linear Synchronous MotorJ.G. Zheng, H.X. Wu, Y. Xu and P. Zheng 2342Adaptive PID Switched Reluctance Motor Controller Based on Fuzzy LogicA.J. Song and J.T. Lv 2348Satellite Liquid Propellant Estimate Based on Virial EquationY.F. Wang, X.P. Liu and X.G. Zhang 2352The Design and Implementation of Water Supply Automatic Control System Based on PLCY.Z. Liu, X.Y. Deng and J. Yu 2356Optimization Design of Gravity Compensation System for a 5-DOF Articulated Heavy-DutyRobotL. Liu, B. Huang, Y.H. Zhu and J. Zhao 2359Virtual Coupling Based Control Methodology for Lower Extremity ExoskeletonJ.X. Cui, Y.H. Zhu and B.Z. Xu 2365Simulation of Control Model Based on Optimal Structure of HOPFIELD Neural NetworkJ. Liu 2370Multivariate Regression Model Analysis Based on Positive Feedback Effect of AutomaticControl SystemW. Wu 2375Reliability Test and Analysis of Electrical Automation Control EquipmentJ. Jiang 2380Intelligent Robots with MCU Communication System Based on MATLABH. Ren and X.X. Wang 2384Temperature Auto-Control System Design for ResistorS. Li 2388PID Adaptive Control in the Application of the Induction Motor System Based on the RBFNeural Network InverseZ. Li and Y. Bo 2393Study on System Design Scheme for Electrical Control Scheme of BoilerX.J. Li, Z.H. Gao, D. Wang and D.M. Yu 2397Simulation of Indoor Temperature Control in VAV Air Conditioning System Based onFuzzy PID and Smith Predictor ControllerT.T. Guo and Q.G. Hu 2401The Electronic Control Design of Automatic Door Based on Micro-ControllerD.W. Li and W. Zhang 2406The Internal Model Control for Nonlinear System Based on LS_SVMS.B. Zhang 2410Design and Analysis of a New Type of Spherical RobotJ. Bai and J.J. Dang 2414The Research of Multi-Car Elevator Control Method Based on PSO-GAJ. Liu, Z.L. Bai, M.H. Gu, X. Zhang and R. Zhang 2418Design of Intelligent Energy-Saving Control System Based on Pyroelectrical SensorQ.J. Zhang, C.F. Yu and Q.Q. Huang 2422Optimization of Automotive Powertrain Based on Genetic AlgorithmF.P. Cao 2426The Study of Intelligent Control in the Process of OvertakingX. Cai, W.J. Chen, M.Y. Song and S.Y. Zhang 2431Novel Design for LC-VSI Double-Loop Control System of Microsources in Microgrid Basedon Typical System Setting MethodJ.M. Li and P. Li 2436

Applied Mechanics and Materials Vols. 556-562 w

The Design of Mixed Solution Control System Based on Siemens S7-412-3H PLCM.F. Zheng, Y.L. Yan, S. Miao and H.X. Hou 2440Optimal Control for Wheeled Inverted Pendulum Based on Collaborative SimulationX. Shi, Z. Xu, K. Tian and Q.Y. He 2444The Design of Weighted Mud Automatic Mixing SystemW.M. Yin and H.J. Luo 2448Adaptive Fault-Tolerant Control for a Class of Nonlinear MIMO Systems with Matchedand Mismatched UncertaintiesW.Q. Xiang, W. Ao and Y.Y. Chen 2452Design of Underwater Rocket Fuse all Electronic Safety Control SystemY. Chen, H. Zhang and S.J. Ma 2458Genetic Algorithm-Based Parameters Optimization for the PID Controller Applied inHeave Compensation SystemY.G. Sun, H.Y. Qiang and X.M. Sheng 2462Adaptive Sliding Mode Control of Servo SystemY.F. Wu, D.W. Ma and G.G. Le 2466Adaptive Fuzzy Controller Design Based on Aircraft ModelY.Q. Li and C. Lei 2470Research of Fuzzy Control System of Temperature Control FanX.L. Wu and J.H. Ke 2474Annular Heating Furnace Temperature Control Based on the Fuzzy-PID Algorithm andCascade Double-Cross Limiting ControlT.G. Li and G. Li 2478The Technology Research of State Observer Design for Second-Order Control SystemY.M. Li 2483Perpetual Topology Control in Energy Harvesting Sensor NetworkC.Y. Lee and C.S. Yang 2487Furnace Temperature Control and SimulationM.Y. Tong, D.J. Xu and J.L. Shi 2492Unknown Environment Mapping Based on Multiple Micro-RobotsW.Z. Zhang, Z.Z. Liu and W.Z. Zhou 2496The Research of the Temperature Decoupling Control Based on QDRNN in AmmoniaSynthesis ConverterX.Q. Lu and L.J. Hao 2502Calibrate a High Speed Micromouse with VBH.M. Zhang, L.S. Peh and Y.H. Wang 2507Design of Control System for 6-DOF PlatformH. Zhou, Y.B. Yang, G.F. Guan, W. Xiong and H.T. Wang 2511The Numerical Control Device Reliability Based on Bayesian ApproachB.Q. Li 2515A Real Time Error Compensation Method for CNC Machine Tools Based onRedevelopment of Human-Machine-InterfaceH.X. Lu, J.G. Yang and S.T. Xiang 2519Analysis of the Variable Intake Control Technology on the CarY. Liu 2523Girth Automatic Welding SystemX.L. Xu, K.L. Xing and J.Y. Dai 2528Study on PID Parameters Turning Method Based on SimulinkX.R. Wang, M. Tao and Y.X. Jia 2532Research on Automatic Single-Station Shoveling Spinneret MachineX.D. Fu and C.C. Yang 2536Design of a Three-Dimensional Garage Control SystemH.Y. Yang 2540Application Research of Stepper Motor Control with TMS320F2812X.C. Guan and B.Y. Shen 2544Fast Tracking Spherical Parallel Robot Design and Hybrid Simulation Base on Solidworkand SimmechanicsY.J. Hu and G. Yan 2549

x Mechatronics Engineering, Computing and Information Technology

Design of Automatic Aquaculture Workboat Driven by Air PropellersY.P. Sun, Y.Y. Zhao, D. Zhao, J.Q. Hong and J.Q. Wang 2553Research on a New Hybrid Robot Real-Time Testing SystemJ.M. Luo, Q.Z. Lin, X.W. Sun, G.B. Li and Y.N. Cui 2559Research of Ultrasonic Used in Mobile Robot Obstacle DetectionH.J. He, D.Z. Xu and L. Wang 2563Design of Automatic Test Platform for the Gyroscope Group Based on Pertinence MatrixH.J. Li, X. Wang, H.F. Xu, C. Yao, W.J. Gao and H. Wang 2567

Chapter 6: Measurement and Instrumentation, Monitoring, Testing,Detection and Identification Technologies

Overview of the Latest Method and Development Direction for Dynamic LoadIdentificationW. Guan, C. Wang, D.S. Chen and J. Gou 2573Research and Design of the DSRC Device Measuring InstrumentX.Y. Li, Z.B. Xu and J.X. Guo 2577A Java EE Platform Test System Based on Improved Genetic AlgorithmS.Z. Nie 2581The Design of Positioning and Environment Detection System Based on RFIDY.H. Cui and L. Bo 2586The Research of Precision Detection System on Grade Rode Based on Image ProcessingTechnologyH.F. Kang and Q.Q. Hou 2591The Design and Implementation of Smart Baby Monitor System Based on ZigBee andGoAheadD. Liu, J.M. Sun and H.W. Zheng 2595Design of Remote Monitoring System Based on GoAhead Web ServerD.W. Xiao, L. Tang, L. Ao and Y.H. Wang 2599Application of Association Rules Based on CF Gene in Intrusion DetectionR. Fu, L.Y. Liu, Y.Q. Zhang and Y. He 2603The Research on Port Loop Detection Method of IEEE1394 Physical LayerJ. Xu and H.W. Lu 2607Head Movement Recognition Technology Research in Augmented Reality ApplicationH.B. Wang and L. Li 2611Design and Implementation of Vehicle Monitoring System Based on the CompatibleInterface of Web MapY.B. Zhao, J. Wang and H. Chen 2619Research and Design of License Plate Recognition SystemF. Ran, F.Y. Zhang and M.H. Xu 2623MapReduce-Based Parallel Linear Regression for Face RecognitionL.S. Zhang, H.Y. Liu and D.J. Lei 2628A Research of MM-SVM Technique for Fault DiagnosisH. Yin, S.Q. Yang, G.M. Li, P. Yin and S.C. Jin 2633A Robust Algorithm for Multiple Moving Targets TrackingY.M. He, Y.Q. He, G.Y. Xiong and M.F. Zhu 2638Software Design of Measurement and Control Device for Smart Grid Based on EmbeddedOperating SystemW.C. Gao, Y.Q. Liu and X.G. Wang 2642A Randomly Permuted Fourier Measurement Matrix for UWB-PPM SignalsH.B. Yin, J.A. Yang and W.D. Wang 2646Countdown Frequency Measurement and its Application in Radar AFCX. Shi 2650Non-Contact Measurement Device Based on Ultrasonic TechnologyZ.P. Lan, H.M. Meng, J.T. Li, Y.R. Wang, P. Li and J.Y. Jin 2654PDroid: Detecting Privacy Leakage on AndroidP.H. Zhang, J.Z. Li, S. Shao and P. Wang 2658

Applied Mechanics and Materials Vols. 556-562 y

Railway Turnout Fault Diagnosis Based on Support Vector MachineY.M. He, H.B. Zhao, J. Tian and M.Q. Zhang 2663Using Networks to Measure Influence and ImpactL.X. Zhang, Y.J. Liu and X.Z. Lu 2668Vehicle Statistics and Retrograde Detection Based on Characteristic AnalysisQ. Ye, L. Zhang and Y.M. Zhang 2672Rolling Bearing Fault Diagnosis Based on Second Generation Wavelet Denoising andImproved EEMDL.J. Meng and J.W. Xiang 2677Key Technologies of On-Line Monitoring Based on Optical Transport NetworksS.H. Yin 2681Fault Diagnosis of MOVA Based on Evidence TheoryA.H. Zhou, H. Song, Y. Fang and Z.W. Chang 2685Transformer Winding Deformation Diagnosis by Induced Voltage TestD.J. Wen, J.S. Lv, X.B. Zhang and C.J. Hu 2689Principle and Realization of Frequency Measuring with Countingdown MethodL.X. Xu and X. Shi 2693Passive Magnetic Detection of Optical Fiber Submarine CableY. Zhang, X.J. Zhou and Z. Zhang 2697Dynamic Object Tracking Based on KAZE Features and Particle FilterY. Xia and X.H. Xu 2702Research on Jamming Method of False Target Based on Micro-Motion ModulationR. Cui, A.G. Sheng, J.F. Pan, B. He and J. Zhu 2707Physical Layer Intrusion Detection System Based on Channel Prediction for WirelessNetworksS.Y. Shin and I.A. Wicaksono 2711Computer Supported Detection for Obstructive Sleep Apnea Using Electrocardiographic-Acceleration SensorsC.M. Kim, J.W. Baek, Y.N. Kim, H.J. Kim, T.H. Kim, S.H. Kim and J.H. Lee 2715Automatic Detection of the Grout Layer of Metro Tunnel by GPRC.C. Qin, H.L. Zhou, Q.M. Yu and X. Yuan 2719A Fault Location Method for HVDC Transmission LinesL.H. Xing, Q. Chen and B.L. Xue 2723Cardiac Arrhythmias Auto Detection in an Electrocardiogram Using Computer-AidedDiagnosis AlgorithmJ.A. Park, S.M. Hwang, J.W. Baek, Y.N. Kim and J.H. Lee 2728Robust Zebra-Crossing Detection for Autonomous Land Vehicles and Driving AssistanceSystemsC. Wang, H. Wang, R.L. Wang and C.X. Zhao 2732The Research of Tunnel Roof Separation Monitoring Device Based on STC12C5AX.Z. Li, Y. Cao, Y.W. Qi, Q.M. Gao and W.F. Wu 2740Application of BP Neural Network to Tendency Prediction of State Monitoring DataX.D. Cheng, H.L. Wang, B. Xu and W. Liu 2744Application of Time-Frequency Analysis & Blind Source Separation to Diagnosis of Faultswith Generator Rotor SystemH.L. Wang, B. Xu, X.D. Xue and K. Cheng 2748A Motion Edge Closing Method of Motion Edge DetectionX.Q. Wu, X. Long and X. Yang 2752Research on the Passive Route Detection and Localization of Armored Optical Fiber Cableand its SimulationT. Jiang, Z.G. Zhang and L.Y. Gu 2756Feasibility Analysis of Reverse Sealed Testing String in HPHT WellsB.K. Gao, W. Wang and X. Qin 2761Transmission Line Status Monitoring System Based on Ad Hoc NetworkH.G. Wang, Y.J. Yan and G.H. Sheng 2765Building a Distributed Testing Execution System Based on TTCN-3S.M. Liu, Y.P. Liu and J. Wu 2772

z Mechatronics Engineering, Computing and Information Technology

Method for Testing and Analyzing the Printing Performance of Fluorescent InksP.P. Yang, Y.F. Xu, N. Gao and Y.Y. Zhang 2779Impulsive Noise Detection and Elimination Method for GPS Measurement DataQ.H. Meng 2783A Long Term Integration Method Based Velocity Template Detector for Dim TargetsM.M. Guo and X.B. Deng 2787Improved SURF Detection Combined with Dual FLANN Matching and Clustering AnalysisJ.F. Li, G. Wang and Q. Li 2792Multi-Target Direction Measurement of Bistatic MIMO RadarJ.F. Wang 2797Joint Detection of Spatial-Temporal Spectrum Holes for Cognitive Radio NetworksF.L. Liu, S.M. Guo and R.Y. Du 2802Improved Maximum-Minimum Eigenvalue Detection with a Single Antenna UsingJackknifingR.Y. Du, S.M. Guo and F.L. Liu 2806Optimal Design of the Data Center Environmental Temperature MonitoringZ.X. Yuan, S.B. Lai, M. Liu and H.Y. Zhang 2810Integrated Optical Waveguide Sensor for Intensive Pulsed Electric Field MeasurementJ.H. Zhang, F.S. Chen and B. Sun 2816Intrusion Detection for Universal Attack Mode Based on Projection Temporal LogicQ.L. Zhou, Y.K. Zhao and W.J. Zhu 2821HSV Based Image Forgery Detection for Copy-Move AttackB. Liu and C.M. Pun 2825Motor Imagery EEG Recognition Based on WPD-CSP and KF-SVM in Brain ComputerInterfacesB.H. Yang, T. Wu, Q. Wang and Z.J. Han 2829Combined QRD-M and Successive Interference Cancellation Detection Algorithm forMIMO SystemsL. Liu, X. Song, Y.H. Han, F.L. Liu and J.K. Wang 2834The Improvement and Implementation of Examinee Identification Algorithm Based on theVideo SurveillanceH.J. Liu, Y.H. Li, B. Li, F. Yang and Y. Ding 2838Image Calibration for Machine Vision Inspection SystemL.S. Feng, Y.P. Huang, Z.K. Xu and Y. Zhang 2841Aluminum Profile Type Recognition Based on Texture FeaturesZ.H. Liu, H.B. Shi and X.F. Zhou 2846Aerospace Testing Process Evaluation Based on the IAHPY. Wang, H. Wang and M.Z. Li 2852Analysis of the Approaches to Determine Crack Initiation Stress of Rock Materials inCompression TestsP.F. Li and Q.C. Cai 2857Vibration Signal Time-Domain Characteristic Extraction for Coal and Rock Recognition atthe Fully Mechanized Top-Coal Caving FaceS.G. Zhu, G.H. Xue, X.Y. Zhao, E.M. Liu and M. Wu 2862Research of Cycle Slip Detection Based on the Carrier Phase RAIMX.Y. Li, X.R. Dong, R.X. Jia and J. Wang 2866An Efficient Method for Accuracy Motion EstimationH.L. Zhu 2870A Fault Diagnosis Method for In-Orbit Satellite Based on Credibility and Degree ofMembershipW. Qin, H.B. Han, L.W. Yan and Y.Q. Guo 2874The Simulation and Analysis of the Large-Scale Intrusion Detection Model in ShuffleNetworksK.W. Li 2878The Design Process of Defect Detection Method for Large Industrial Automatic ControlSoftwareZ.C. Wang 2882

Applied Mechanics and Materials Vols. 556-562 aa

Simulation on Optimized Intrusion Detection of Multi-Layer, Distributed and LargeDifferences DatabaseN. Wang, Y. Li and L.M. Yuan 2886Design of Surface Quality Inspection and Sorting System of Honeycomb CeramicsW.J. Dai 2890Realization of Low Frequency Wakeup in Tire Encoded Radio Frequency IdentificationSystemW.D. Yang, L. Li and K. Peng 2895Design and Production of an InSAR Reflector and Applied Research in the LandslideDeformation MonitoringY.T. Tu, P.F. Tu and Y.J. Chen 2899The Research and Design of Virtual Spindle Vibration Test SystemF. Dong, J.C. Yang, T.Z. Gao, Y. Xie, L. Guo, H.Y. Zhang, S.M. Hu and G.Q. Zhou 2903Real-Time Detection of the Flexible Needle Shape by Using Strain GaugesJ.C. Zhang, W. Dong and Z.J. Du 2906Design and Implementation of Greenhouse Temperature and Humidity Remote MonitoringBased on Single Chip MicrocomputerJ.Y. Xiong 2910The Intrusion Detection Model of Medical Information Diversity Database under CloudComputingQ.L. Zhang, P.C. Cong, F.B. Meng, J.P. Yang and B. Wang 2914Motion Recognition Based on Spatial Temporal HMM and Improved KPCAZ.Y. Wang, R. Chen and A.S. Dong 2919The Simulation and Analysis of Physical Ranging Process Based on Optimal AlternativeLight Source TechnologyH.Z. Liu 2924Research on a Novel Automation Software Reliability Detection MethodW.L. Liu 2928Simulation and Analysis of the Network Feed-Forward Intrusion Detection ModelW.Q. Cui 2932A Smart Method for Detection and Research on Heart SoundZ. Wei, M. Xin and Q.D. Yu 2936The Design of Gas Real Time Monitoring System Based on Gas Alarm SensorW. Dai, G. Xie and B.Q. Zhao 2940A Survey on Motion Capture Data RetrievalN. Lv, Y. Huang, Z.Q. Feng and J.L. Peng 2944Design and Creation of the Automatic Data Testing Tools for Smart Sensor Based on CANBusW.K. Qian and X.L. Zheng 2948Research on Method of Identifying CO2 Corrosion Type Based on Morphology Image andSupport Vector MachineT. Gao, Q. Liu, Y.H. Gao and L. Yue 2953Study on the Fault Diagnosis of Gear Pump Based on RBF Neural NetworkG.L. Zuo, F.L. Niu, Y. Cheng and Y.X. Zhang 2957Forced Vibration Measurements of Clinched JointsX.C. He, F.L. Liu, H.Y. Cun, H.Y. Yang, B.Y. Xing and K. Zeng 2962Greenhouse Monitoring System Based on ZigBee and GPRSX.X. Han 2966Condition Monitoring System of Repaired Gearboxes of Wind TurbineJ.S. Kang, X.H. Zhang, L. Xiao and X.A. Zhang 2970Based on SoC Technology Frequency Measurement MeterW. Zhang 2974Construction of Tire Abnormal State Monitoring System Based on GMMC. Wen 2978Research on SVM-Based Intelligent Traffic Target Recognition AlgorithmL.P. Wang and D.C. Sun 2981Study on Vehicular PEMFC Humidity Measurement Based on Fuzzy SetsB.H. Tan, S.H. Quan and X.L. Cao 2986

bb Mechatronics Engineering, Computing and Information Technology

The Design of Reliability Guarantee Technology Based on Wireless Real-Time MonitoringSystemX. Yu and X.M. Huang 2990Drivers’ Seat Belts Detection at Crossroads Based on OpenCVY.W. Qiu, J. Pan, N. Zhou and Y.F. Wang 2996The Determination of Deformation Monitoring Indices Using Lifting Wavelet and Multi-Component Cloud ModelH.Z. Liu, N. Ding, D. Qin and J.Y. Liu 3001Implementation of Automatic Test System Based on Virtual Instrument Technology andUSB StructureM. Gao and H. Pan 3006An Effective Pattern Matching Algorithm for Intrusion DetectionQ.Q. Zhang, Q. Zhang and Y.J. Feng 3010Application of Ant Colony Algorithms and Neural Networks in Fault DiagnosisJ.B. Yu 3014Software Testing-Value Model: New Concept and Application of SMBT-LHH.C. Zhang 3018Voltage Measurement Method for Generator Test Based on Labwindows/CVIX.Y. Li and H.W. Liu 3023Design and Implementation of Shield State Detection System for Charging Pile PortK.F. Xie, H. Zhang, L.B. Ding and B. Hu 3027Detection of the Center of Eyes’ Position Based on Grating Projection MethodG.L. Chen, D.Z. Li and Z.Q. Huang 3031Fast Fourier Transform Measuring the Phase Difference Based on MATLABQ.Q. Huang and J.L. Shao 3035Research on Outdoor Positioning Based on Ray Tracing MethodX.Q. Peng 3039Research on the Measurements of the Production Factors between the Hi-Tech Zones andthe HinterlandsB. Zhao 3043Design of Hazard Installations Monitoring System Based on WSNK. An and J.Q. Yu 3047The Application of Transient Electromagnetic Method in Detecting the Corrosion of HeatDistribution PipelineB. Hu, J. Liu and R.Q. Yu 3052Research on EIS-Based Anomaly Detection Technique for Composite MaterialsC. Sun, E.S. Dong, Y.H. Li and B. Zhu 3056Research and Development of Vehicle Fault Diagnostic System Based on MDIJ. Hu, H. Li, X.J. Hou and X.Z. Qin 3060The Detection Fusion Algorithm of Intellectual Vehicles Based on Laser Radar inTraversable AreasH.N. Liu and X. Hu 3065Speech Recognition Algorithm Based on Nonlinear Partition and GFCC FeaturesX.T. Meng and S. Yin 3069An Improved Moving Object Detection Algorithm Based on Colour SeparationW. Zhang and W.H. Xu 3074Numerical Identification of Ship-Roll Chaos ThresholdY.C. Liu, A.K. Hu and F.L. Han 3078Transformer Automatic Test System Based on Virtual InstrumentJ.F. Ren and S.T. Zhao 3084Research of Tracking Algorithm for Moving Object Based on Video SequenceZ.X. Han and B.H. Zhang 3088Research on the Technology of Data Transmission and Position Detection Based onInduction RadioW.B. Cheng, L. Jiang, C.K. Wen, X. Li and S.H. Jiang 3093A New Method Based on Photogrammetry for Hull’s Deformation Measurement and itsAccuracy AnalysisX.M. Liu, H.F. Sang, Q.X. Wang and N. Ma 3097

Applied Mechanics and Materials Vols. 556-562 cc

Target Tracking Cluster-Based Control in a Dynamic EnvironmentW.Z. Zhou and Z.Z. Liu 3101Research for the Crack Dynamic Monitoring of Marine Diesel EngineZ.M. Yu, S.H. Zhang and S.X. Jiang 3107A Monitoring and Fault Diagnosis System for Aero-Engine Pipeline Based on DistributedFiber Bragg Grating SensorD. Liu, Q. Liu, F. Chen, Q. Wei and Q.S. Ai 3112Cooperative Navigation for Multiple AUVs Based on Relative Range Measurements with aSingle LeaderX.L. Huang, L.Y. Liu, T.T. Lv and W.B. Li 3117Research on Measurement Method of Rotational Angle of Plane Rudder Based onADXL345 SensorQ.F. Yang, G.R. Ye and C.Y. Li 3124Transformer Inrush Current Identification Based on EMD+TEO MethodsX.F. Wang 3129Fault Diagnosis Method of Vehicle Power System Using Bayesian NetworkH.J. Li, Y.W. Cheng, C. Yao, H.F. Xu, Z. Yao and C.F. Qu 3134Analysis and Exclusion of Magnetization Failure on CJW-3000 Magnetic Flaw DetectionMachineT.Z. Zhang and F.S. Li 3139Design and Implement of Survey Ship Computer Room Remote Temperature and HumidityMeasure SystemQ.Q. Ding, M. Tao and X.R. Wang 3144The early Warning System of Embankment Slope Deformation Based on IBIS-LD.S. Guan, Y.Q. Li, Z.X. Huang and S.D. Yang 3148Gel Pen Smoothness Automatic Measuring Device Based on LabVIEWY. Zhou and C.C. Yang 3152Laser Speckle Detection System for Seed Viability AssessmentS. Men, L. Yan, H. Qian, N. Li and J.P. Yao 3156Design and Application of Online Landslide Monitoring System for Transmission LinesCorridor Based on the Optical Fiber Sensing TechnologyY.X. Cao, Z.H. Xue, C.H. Zhang, Y.C. Jia, Q.H. Lu and C. Jiang 3160Analyze Soft Measurement Technology Based Intelligent Algorithm in Sewage TreatmentW.C. Wang, Z.X. Chen, K. Li and Q.Z. Niu 3164Soft Measurement Technique of Sewage Treatment Parameters Based on Wavelet NeuralNetworksW.C. Wang, K. Li, Z.X. Chen and Q.Z. Niu 3168Design of Steering Angle Detecting System Based on Wireless CommunicationW.Q. Qi, X.M. Yu, Y.J. Sun, Y. Li and C.Y. Wang 3172Research on the Applications and Measurements of the Microwave TechnologyM.Z. Qu 3176Calibration Sources Optimization in Passive Location Systems Using DifferentialCalibration with TDOA and FDOA MeasurementsL. Zhang, D. Wang, H.Y. Yu and Y. Wu 3180Measurement of Stress Attenuation Effect in the Sand under Explosion WaveX.M. Li, M. Wang, X. Guo, Y.J. Li and Y.C. Peng 3187Research Overview on Intelligent Fault Diagnosis Technology of TurbineY.W. Jing and L.F. Li 3191Based on PLC and WinCC Monitoring Software Material Sorting Station System DesignJ.N. Yang, X.Z. Liu, H.P. Feng, F.Y. Li and Y.L. Jia 3196Based on the Mechanical Characteristics of Wheat Biomass Detector ResearchS.S. Zhu, X.H. Lei, Y.S. Zhu and J.G. Liu 3200Study on DPCA Sidelobe Clutter SuppressionJ.D. Qin 3206Underwater Mining Vehicle Position and Azimuth Determining System InterfaceProgrammingL. Zhi and H.M. Gou 3211

dd Mechatronics Engineering, Computing and Information Technology

Intelligent Video Analysis System Based on ARM CortexK. Zhang 3216Investigation of Ventilation Monitoring and Controlling System for SupercavitationExperiment in the Water-Tunnel Based on Configuration SoftwareS.S. Li, P. Wang, X. Han, J.F. Liu and X.G. Zhou 3219An Engineering Approach for Observer Trajectory Optimization in Passive TargetTracking SystemC. Zhao, H.W. Quan and D.L. Peng 3223Center in Navigation System Design and Implementation of the Map Matching AlgorithmC. Zhang, Z.B. Ren, H. Qi, J.H. Meng and D. Wei 3227Positioning Method without Current Navigation DataJ.Z. Li and R. Wang 3234Multiple Model CPHD Filter for Tracking Maneuvering TargetsJ. Sun and D. Li 3238RBF Neural Network Used on Universal Intelligent Monitoring System in Heavy MachineryS.Y. Lu, Q.H. Zhou and Q.B. Li 3242Trajectory Tracking Method Based on Feedback Control in the Virtual DomainJ.G. Zhao, L. Yan, Y. Li and G.Y. Bai 3246Monitoring and Control System Design for Tool Wear Condition of CNC Machine Based onArtificial Neural NetworksD. Su 3251A FBG-Based Robust Damage Identification Approach Considering Environmental andOperational Conditions EffectsY.H. Zhang and W.Y. Yang 3255Research on the Collision Process of Inertia Parameters Identification of Unknown ObjectZ.G. Chen, Q. Wu and J. Shu 3259Study on Coupling Factors and Decision Model of Pattern Recognition and IntelligentSystemX.Q. Guan 3263Design on a New Kind of Sensor for Physiological SignalsZ. Wei, M. Xin and P. Wang 3268A New Method of Seamless Navigation for the INS/WSN-Integrated SystemY. Xu, X.Y. Chen, Q.H. Li and H.Q. Huang 3272Design of Monitoring System to Marine Diesel Engine Supply Units Based on ForcecontrolMonitoring SoftwareJ. Chen, S.J. Liu, Q. Li and X.B. Ning 3277Indoor Three-Dimensional Positioning Method Based on CSSG.P. Liu, J.Y. Zhang and R.X. Yang 3281Application of the Smart Integrator in the Ship-Borne Radar Servo SystemM. Tao, X.R. Wang and G.P. Zhang 3287Application of Visual Basic in Fluctuant Slow Strain Rate TestQ.L. Sun, L.D. Shi and Z.R. Liu 3291Research on Airport Navigation Light Simulation SystemW.Q. Li, Y. Tang, L. Liu and Y. Xu 3295Overlapping Community Detection Algorithm Based on Seed DiffusionB. Wang, H.B. Zheng, Y.J. Fang and J.J. Wei 3300A New Method Based on Image Registration AlgorithmW.W. Hu 3305Research on GPS Positioning Error and Improvement Measures for ShipsH.R. Song 3309Study on GPS Navigation Navigation SystemH.R. Song 3313The Research on Software Measurement Process Model and Data Acquisition and AnalysisY.H. Zhang and H.C. Zhang 3317Simulation Study of Road Identification on Dynamic Identification IntervalX.L. Zhang, R.Y. Sun, L. Zheng and H.Y. Ge 3321Remote Medical Monitoring Based on Wireless Sensor NetworkA.J. Song and J.T. Lv 3327

Applied Mechanics and Materials Vols. 556-562 ee

Detecting System of Crop Disease Stress Based on Acoustic Emission and VirtualTechnologyS.F. Yang, L. Xue and J.M. Zhao 3331Study on the Improvement of the Permeability of Eucalyptus grandis× Eucalyptus urophyllaby Microwave RadiationJ. Tao, K.Y. Pen, G.L. Wu, J.P. Sun, X.R. Li and X. Pang 3335

Chapter 7: Computation Methods and Algorithms for Modeling,Simulation and Optimization, Data Mining and Data Processing

The Study & Implementation of the Model of Heterogeneous Data Exchange Based on XMLY.W. Xia 3343The Research of XML Keyword Retrieval Algorithms Based on MapReduceY.W. Xia and J.L. Xie 3347The Research of Heterogeneous Database Migration Based on XML and MiddlewareS.D. Lv and Y.W. Xia 3350Discussion on Knapsack Problem Optimization Algorithm Based on Complex NetworkM. Xiao and Y.Y. Zhou 3354Platform of Spatial Spectrum Estimation Based on Matlab GUIS. Zhao and X.F. Zhang 3357DOA Estimation Algorithm for Non-Uniform Linear Array with Parallel Factor and PowerLoadingC. Jiang, X.F. Zhang and L.C. Zhang 3361L-Shaped Array Structure Optimization via Cramer-Rao BoundL.C. Zhang, X.F. Zhang and C. Jiang 3365Analysis of Data Mode in the Information ConstructionJ.L. Lin and X.L. Li 3369Data Analyzing Modeling about the Correlation between the Incidence of Stroke andEnvironmental FactorsW.B. Liu 3373A New Video Encryption Algorithm Based on the Complex Chaotic SystemL.H. Li and X.J. Tong 3376Study on t