Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Table of Contents
Sponsors, Committees, Preface
Wood-Polymer Composite Prepared by In Situ Synthesis of Copolymer within Wood and itsDimensional StabilityY.F. Li, C. Jiang, D.J. Lv, X.Y. Dong and Y.X. Liu 1
Flexural Behaviors of RC Beams Strengthened with Post-Poured UHTCC LayerS.L. Xu and N. Wang 6
The Study of Several UV Curable Polyurethane AcrylatesY.L. Zhong, X. Yang, W.Y. Zhou, Q.P. Zhu and Z.H. Yang 10
The Relationship between Residual Stress and Resistivity of Au/NiCr/Ta Multi-LayeredMetallic Films by Magnetron SputteringW. Tang, X.H. Wang, Y.P. Chao and K.W. Xu 14
Combinations of Various Self-Consolidating Concrete Test Methods and WorkabilityResponsesW.J. Long, K.H. Khayat and F. Xing 18
Effect of Substituents and Solvents on Phenol-Isocyanate Urethane ReactionP.F. Yang, Y.D. Han and T.D. Li 23
Parameter Determination of Discrete Element Model of Conditioned Soil by Genetic NeuralNetworkL. Wu, T.M. Guan, F.Z. Qu and S.J. Li 27
Improving the Performance of Intumescent Flame Retarded Polypropylene with Nano-ZrO2X.L. Wang and L.H. Wu 32
The Study of Sputtered Silver-Based Low-Emissivity Coating on GlassB. Cai, R.S. Xin and X.L. Jia 36
First-Principles Calculation of Elastic Properties of TiB2 and ZrB2H.Y. Wang, F.Y. Xue, N.H. Zhao and D.J. Li 40
Preparation and Performance Research of Thermosetting Heat-Reflective Coating forAsphalt PavementX.J. Cao, B.M. Tang, H.Z. Zhu and W.Z. Li 44
Erosion-Resistant PVD ZrAlCuN Coating for Titanium AlloyJ. Du, P. Zhang, J.J. Zhao and Z.H. Cai 51
Mechanical and Shielding Properties of an As-Cast New Pb-B Shielding CompositeMaterialsY.H. Duan, Y. Sun, M.J. Peng and Z.Z. Guo 56
Physical and Electrochemical Properties of Layered Li[Ni1/3Co1/3Mn1/3]O2 CathodeMaterialsJ. Wang, C.M. Wang and L. Wang 64
Effects of RE on the Microstructure and Mechanical Properties of Electrodeposited CopperFoilT. He, G.B. Yi, F.M. Cai, W.Y. Peng and X.J. Yang 68
Structure, Electrical and Optical Properties of Ni-Doped Cu3N Films Deposited by RadioFrequency Magnetron SputteringJ. Wang, J.T. Chen and G.A. Zhang 72
Crack Pattern Evolution and Complexity of Brittle Failure of RockS.W. Hao, G.W. Wang and B. Wang 76
Gd2O3 Added Glass-Ceramic Composite for the Improvement of Energy Storage Densitythrough Controlled CrystallizationY. Zhou, Q. Tang, J. Luo, Q.M. Zhang, L. Wang and J. Du 80
Study on the Reaction Mechanism of (α-Al2O3+TiB2+TiC)/Al Composites Fabricated by Al-TiO2-B4C SystemH.G. Zhu, J. Min, D. Chu and H. Wang 84
Similarity of Deuterium Absorption at Room Temperature for Different Ti-Zr-NiQuasicrystalsH.G. Huang, R. Li and L. Chen 88
Self-Assembled Stratified Structure in Polyalkylthiophene-6 and Polyvinylcarbazole BlendFilmN.D. Tan, Y.L. Zhang, Z.Y. Li, K. Olihara and F.S. Zhang 92
Mathematical Model for Temperature Distributions of Work Roll in Aluminum Strip ColdRollingD.D. Gao and S. Wang 97
Research on the Tribological Properties of SF Polymer Water-Lubricated BearingsZ.X. Wu, L.L. Zheng and F.X. Fan 102
Morphological Properties of Poly(Trimethylene Terephthalate)/Maleated Styrene-Butylene-Co-Ethylene-Styrene/Organoclay Ternary NanocompositeK.Y. Wang, P.S. Tang and F. Cao 108
Effect of Film Thickness on Structure and Property of Pb(Zr0.53Ti0.47)O3 Thin FilmM.X. Shi, W. Mao, Y. Qin, Z.X. Huang and D.Y. Guo 112
Transformation Induced Plasticity Behaviors of TRIP Steels with Different Heat TreatmentProcessesF.X. Zhu, M.Y. Zhang and D.S. Zheng 118
Study on Factors Impact on Performance of Ceramisite Made of Shale and SludgeF.Z. Wu and W.H. Wang 123
Study on Choice of Reference Planes for 3D Machined Surface Roughness of SiCp/AlComposites during High Speed Milling ProcessY.J. Wang, M. Zhou and Y.J. Zhang 129
Analysis on the Microstructure Characteristics of Steel-Slag Based CeramicsH. Bai, P. Liu, X.B. Ai, L.H. Zhao, Q. Tang and S.L. Zheng 133
Preparation and Characterization of Poly(Lactic Acid)/Ethylene Glycidyl MethacrylateCopolymer BlendsC.H. Tsou, Y.M. Li, W.H. Yao and J.T. Yeh 139
Thermo-Physical Properties of Copper Matrix Composites Reinforced with 3D-SiCNetworkH.W. Xing, J.S. Zhang and X.M. Cao 144
Chiral Resolution of Racemic (±)-1,1'Bi (2-Naphthol) by Use of Molecularly ImprintedPolymersH.X. Dong, F. Tong, J.Q. Li, Z.X. Wang, Y.H. Wang and X.D. Shen 150
Structural Transformation of Aluminum Nanowires during SolidificationG.R. Zhou, Z.Q. Guo and X.Y. Teng 160
Dynamic Properties of Lead Rubber Bearings and its Seismic Isolation Applications inHigh-Speed Railway BridgeL.K. Chen, L.Z. Jiang and P. Liu 164
Study on Inorganic Phase Change Materials Encapsulated by Rice StrawsG.H. Hou and X. Zhu 168
First-Principles Calculations of Transition Metal Nitrides TiN and NbNF.Y. Xue, H.Y. Wang, N.H. Zhao and D.J. Li 174
Research on Blue-Algae Removal from Eutrophication Water by Modified ClayL.P. Wang, L. Lu, N.Y. Gao, X. Xu, Y.Y. Zhang and Y.C. Guo 178
Wear Mechanism Analysis and Microstructure of Vanadium Carbide Coating by ThermalDiffusion ProcessX.J. Liu, Q.L. Li, J.X. Jiang and B. Liu 183
Dynamic Behavior and Stability of Prestressed Arch-Supported Reticulate Shell StructureJ.T. Dong, J. Zhao and K. Shi 188
Research on the Shielding Performance of Electromagnetic Shielding ClothesY. Li and W.B. Zhang 194
Axial Compression Experimental Research of RPC Filled Steel Tube ColumnsZ.G. Yan, Y. Huang and M.Z. An 198
Trisiloxane Surfactants Technology Optimization and Impact of Surface TensionB. Tao and L.B. Zhang 203
Preliminary Study on Natural Villous Bamboo Fiber Medium Density Fiberboard (MDF)W.B. Yao and K.M. Jiang 210
Structure and Mechanical Properties of (Cu, Ti) - Binary Metal Doped Diamond-LikeCarbon FilmsX.H. Jiang, B. Zhou, D.G. Piliptsou and A.V. Rahachou 217
b Advances in Composites
Study on the Morphology and Properties of Nylon11/Montmorillonite NanocompositesY.C. Li, G.S. Huo and B. He 223
Ductility Evaluation of Reinforced UHTCC Structural MembersX.F. Zhang and S.L. Xu 229
Compressive Buckling of Composite Plates with a DelaminationC. Kang, Z.J. Han, G.Y. Lu and S.Y. Zhang 235
Steady Thermal Stresses in a Ceramic/FGM/Metal Composite EFBC Plate underConvective Heat Transfer BoundaryD.H. Tu, Y.J. Xu and X.L. Zhou 239
Experiment Study on the Frost Resistance of Steel Fiber Reinforced ConcreteL. Jiang, D.T. Niu and M. Bai 243
Aging Effects on Pavement Performance of Asphalt MortarW.Q. Wang, Y.K. Mo, H.Y. He and H.Y. Zeng 247
Study and Preparation of Ti-Doped ZnO Thin Films by Using Chemical Bath DepositionC.H. Hsu, S.F. Yan and C.H. Lai 252
Room-Temperature Electrical Conductivity Property of Si3N4/TiN Composite CeramicsS.H. Zhang, Z.Q. Kang and Q. Lu 257
A New Regeneration and Restoration Technology of Asphalt PavementZ.F. Lu, M. Qin and X.H. Guo 262
Enhancing the Built Environment by Green RoofsJ.S. Du, P.L. Ng, J.J. Chen and W.W.S. Fung 267
Effect of Electric Pulse Modification on Alloy Layer of Hot Galvanizing CoatingsW. Sun, J.S. Wang, L.J. Cao, H.Y. Sun, J.H. Wang and Q.G. Xue 274
Nonlinear Seismic Response Analysis Method for Steel Mega-Frame Structures Based onImproved Finite Segment Element Plastic Zone ModelG.L. Xu, L.X. Zhang and Y.S. Bai 279
Frictional Brake Material Reinforced with Sisal Fiber and Glass Fiber HybridM. Zeng, C. Wei, X.M. Xiong and C.B. Yu 284
Prediction on Autogenous Shrinkage of Self-Consolidating ConcreteW.J. Long, K.H. Khayat and F. Xing 288
Low Temperature Fired Ferrite/Ceramic Composite Materials and their PermeabilitySpectraW.W. Ling, H.W. Zhang, Y.X. Li and Y.L. Liu 293
Mechanical Performance of Straw Fiber Reinforced Desulfurization Gypsum CompositeMaterialsY.Y. Wang and G.Z. Li 299
Preliminary Research on Pb-Sn-Al Laminated Composite Electrode Materials Applied toZinc ElectrodepositionH.Y. Ma, P.X. Zhu, S.G. Zhou, J. Xu, W.F. Huang, H.M. Yang, J.X. Guo and M.J. Chen 303
Grafting Milk Protein on Polyester Fabric Encased with Hydroxide and Wearability ofPolyester Fabric Grafted Milk ProteinG.X. Zhang, W. Hu, S. Tian, Y. Peng, X.P. Zeng, F.X. Zhang, L.X. Jing and X.R. Duan 309
Study of Surface Modification of Recycled Aggregate and Interfacial Zone Microstructureof the ConcreteH.Z. Cui and F. Xing 313
The Pervaporation Performance of Polyimide-Block-Polyethylene Glycol Membranes forGasoline Desulphurization: Effect of PEG GroupsF.W. Lu, Y. Kong, H.L. Lv, J. Ding and J.R. Yang 317
Preparation and Application of Hybrid SBS Bipolar Membrane in Electro-Generation ofHPAc and Succinic AcidX.H. Huang, S.B. Ke, F.C. Ding, Y. Zhao and Z. Chen 321
Damage Theoretical Analysis of 2.5D C/SiC Composites under Tensile and Shear LoadingY.J. Chang, K.S. Zhang, G.Q. Jiao and J.Y. Chen 330
Fouling Resistance of PVDF-Fabric Composite Membrane in Membrane DistillationDesalinationR.T. Huo, Z.Y. Gu, K.J. Zuo and G.M. Zhao 334
Synthesis and Photovoltaic Properties of Fluorene-Based CopolymersQ. Hou, X.H. Zeng, H.Y. Zhen, G.L. Li, T. Guo and X. Xu 340
Advanced Materials Research Vols. 150-151 c
Response of Concrete Beams Partially Prestressed with External Unbonded Carbon Fiber-Reinforced Polymer TendonsJ.S. Du, D. Yang, P.L. Ng and F.T.K. Au 344
Study on Low Temperature Sintering Behaviour of CaO-B2O3-SiO2 Glass CeramicsP.F. Wei, H.Q. Zhou, H.K. Zhu, B. Dai and J. Wang 350
Preparation and Basic Mechanical Properties of Self-Compacting ConcreteH.Y. Xie and X. Zheng 354
Sandwiched Wood-Plastic Composites with Flame-Retardant SkinW. Lei, H.M. Ma and Y. Xu 358
Migration of Cations in Mortar under an Electrical Field Controlled by a Constant CurrentDensityW.C. Wang, C.C. Liu and C. Lee 362
Vibration Research of Gear Box in H5 Mill for Alloy Bar's Rolling ProcessL.Q. Wei, Z.H. Qu, H.H. Chen, M.Y. Liu and X.Y. Zhang 373
Study on Application of Modified Polyethylene in Preparation of Wood-Plastic CompositesQ. Lü, Q.F. Zhang, H.K. Feng and G.Q. Lai 379
Synthesis, Characterization and Thermal Analysis of Rod-Shaped Polyaniline-BariumFerrites NanocompositesY.X. Li, Y.L. Liu, H.W. Zhang and W.W. Ling 386
Hydrothermal Synthesis and Adsorption Proprieties of Titania-Active Carbon CompositesY. Luo, X.M. Yan, H. Yang and G.S. Su 391
Crack Prevention-Based Selection Method for Thickness of L-Shaped Floorslab withoutBeamY.L. Liu, T.L. Yan and Z. Jiang 396
Sulfonation Surface Treatment of Plasma Alkali Secondary Lithium Battery SeparatorX.Q. Zhu and H.W. Wang 400
Effect of Compatibilizing Agent on Mechanical and Thermal Properties of Wood-PlasticCompositesW. Lei, X.Y. Ding and C. Xu 406
Research on Swirling Cavitation Degradation and its Application in Wastewater TreatmentJ.P. Shi, P.Q. Guo and K. Lu 410
The Moment-Curvature Relation of SRC Column Based on the Fiber Model Method and itsInfluencial Factors AnalysisP.C. Wu and L.X. Zhang 414
Hydration Behavior of Metakaolin-Cement Pastes with Different Contents of ReactiveAluminous at Early AgeT. Sun, Z.H. Shui and G.M. Wang 419
Treatment Materials for Spalling on Loess SlopeW.J. Ye, G.S. Yang, X. Li and N. Zhuang 425
Thermal Stability and Dynamic Mechanical Behavior of Nano-SiO2/Phenol FormaldehydeResin NanocompositesC.B. Yu, C. Wei and D.M. Pan 429
Research on Pavement Characteristics of Epoxy Resin and Rubber Modified AsphaltR.H. Zhang, J.J. Duan and Y.M. Yin 433
Load Carrying Capacity Analysis of Multi-Spiral Reinforced Concrete ColumnJ. Wu, F.Z. Wang, W. Yang and Q.J. Ding 441
Tool Materials Design and the Sintering Optimization Based on Interface StrengtheningTheoryF.Z. Yang, G.Y. Meng, J.Q. Zhou and C.H. Li 447
Fabrication of ACF/CNT Composites by CVD MethodL.P. Wang, Z.C. Huang, M.Y. Zhang and Q.Z. Huang 452
Control Growth of Pyrocarbon by Chemical Vapor InfiltrationM.Y. Zhang, Q.Z. Huang, Z.A. Su and Z.Y. Xie 456
An Experimental Study on Effect Factors of Post-Installed Bar in Concrete Anchorage andBonding PerformanceF. Li, L. Wang, M.J. Zhou and X.Y. Wang 460
Thermal Conductive Composite Prepared by Carbon Coated Aluminum NanoparticlesFilled Silicone RubberH.Y. Zhang, J. Lin and H.Q. Hong 464
d Advances in Composites
Study on Performance of Epoxy Asphalt Concrete Applied in the Deck Pavement ofPingsheng Steel BridgeW.Q. Wang and H.Y. He 470
Thermal Properties and Flame Retardancy of Wood Treated with a Series of StannatesH.Q. Qu, W.H. Wu, L. Liu and J.Z. Xu 475
Effect of Technical Parameters on Preparing for Vanadium NitrideS.S. Yu, W.X. Li, Z.L. Ji, N.X. Fu and Z.T. Sui 480
The Engineering Properties Comparative Study of Wetlands Soft Soil and Soft Soil of otherGenesisH.J. Liu, W. Shan, Y.Q. Yang, C.J. Wang, Y. Guo and P.X. Wang 484
The Growth, Surface Topography and Curie Temperature in Ni Thin Films: Kinetic LatticeMonte Carlo SimulationL.J. Zeng, S.J. Shen, Q. Feng, J.M. Zhang, Z.G. Chen and Z.G. Huang 493
Preparation and Performance Test of Composite Clinoptilolite Filter MaterialY.Z. Yu, C.H. Chun and Y. Feng 499
Multi-Objective Optimization of a Wedged-Ring Joint StructureY.D. Liu and Y.H. Yin 503
The Mechanism of Antibacterial Activity of Copper and Cerium-Loaded White CarbonBlackB. Zhang, T. He, X.N. Tang, Y.H. Xu and L. Fu 508
Seismic Behavior Analysis on the Steel Cold-Formed in Modular HouseY.P. Chu, Y. Yao and Y.J. Deng 512
Experimental Study on Damage Diagnosis of Reinforced Concrete Beam with AcousticEmissionA. Jiang 517
Synthesis and Characterization of Modified Zn-Antibacterial White Carbon BlackB. Zhang, X.N. Tang, T. He, S.Q. He and W.R. Yao 522
Cement-Based Composite with Carbon Nanotubes Reinforcement Tailored for StructuralDampingJ.L. Luo, Z.D. Duan, T.J. Zhao and Q.Y. Li 526
Effect of Annealing Temperatures on the Microstructure of CuInS2 Thin Film by One-StepElectrodepositionL. Lu, Y.J. Wang and X.G. Li 530
Development of a Low Yield-Strength Ratio and Fire Resistant Steel for High-Rise BuildingQ.B. Yu 534
Tensile Properties of Aluminum Matrix Composites Reinforced with Submicron SiCParticlesC.L. He, D.Y. Lou, J.M. Wang and Q.K. Cai 538
Study on Resistance to Chloride Ion Penetration of High Performance Concrete for HighSpeed Railway Bridge PileS.A. Cui, Y.Z. Ye, F. Fu and Z.F. Liu 542
Smart Green Composite: Effect of Cuttlebone Particle on the Mechanical Properties of NRVulcanizatesP. Klungsuwan and S. Poompradub 547
Study on Bonding Properties of Birch with API AdhesiveY.H. Zhang, J.Y. Gu, Y.W. Zheng, H.Y. Tan, M.W. Di and L.B. Zhu 551
A Research on Performance of Polystyrene-Aerated Concrete Wall MaterialsP. Guo, R.Y. Wang, M. Feng and X.J. Cao 556
Preparation of Exfoliated Polyethylene/Clay Nanocomposites at High Clay ContentH.Q. Hong, H.Y. Zhang, H. He and D.M. Jia 561
Hydrophilic Modification of PES Hollow Fiber Membrane via Surface-Initiated AtomTransfer Radical PolymerizationY.B. Shen, Y.T. Zhang, J.H. Qiu, Y.W. Zhang and H.Q. Zhang 565
The Seismic Behavior of Strengthened Joints between Concrete-Filled Steel Tubes andBeams Based on the Numerical Simulation TechnologyY.P. Chu, Y. Yao, S.L. Xiao and Y. Chen 571
Study on Vibration Alleviating Properties of Different Fiber Reinforced Polymer ConcreteW.F. Bai, C.F. Li, Y. Yang and Q.K. Hu 576
Advanced Materials Research Vols. 150-151 e
Fabrication and Performance of Al-NaI Radioactive Transmutation TargetsH.Q. Liu, Y. Feng, X.B. Zhang, B. Li, Y.F. Zhu, D.B. Yu, X.Y. Liu, X.B. Pan, J. Tu, X.P.Ouyang, L.Z. Cao and H.C. Wu 580
Effect of Material Properties on Plastic Shrinkage of Ultra-Fine Sand Pumping ConcreteY.Y. Zhang, Z.K. Lou and X.B. Zhang 588
Evaluation on Performance of Functional PolymerW.X. Wu and Z. Jiang 594
Enchancement of Mechanical Properties in BaTiO3 Ferroelectric Thin FilmsC. Lu, X.Y. Deng, X.F. Guan, Z.W. Tan, Y.J. Zhang, R.B. Yang and L.R. Han 599
Study on Frost-Resistant Experiments of Concrete for High Speed Railway Pile FoundationProtectionF.H. Li, Y.Z. Ye and Y.K. Yang 603
The Research on Influencing Factors of Polymer FloodingW.X. Wu and S.N. Zhu 608
Interaction and Enthalpy Recovery Behavior in Polymer Blends of Polysulfone andCarboxylated PolysulfoneY.Q. Jiang and Y.B. Zhang 612
Preparation and Performance Study of Reflection Heat Preservation Insulation CoatingS. Zhao, L.Y. Qiu and S. Liu 620
Effect of Rosin Ester on Water-Resistant Adhesion Oximized RTV-1 Silicone RubberSealantS.L. Luo, Y.S. Hu, G. Shi and H.M. Pan 626
Status and Development Trend of Energy-Saving Wall Materials in Cold AreasC. Lv 630
Effect of Density on Physical and Mechanical Properties of Reconstituted Small-SizedBamboo Fibrous Sheet CompositeR.X. Zhu and W.J. Yu 634
Organic EL Devices Based on Pyridine-Containing CompoundsT.X. Li, S.S. Gao, P. Sui, N. Kong, S.S. Wu and S.T. Li 640
A Novel Green Tape with High Solid Content Prepared by Aqueous Tape-CastingS.X. Wang, X.Q. Ouyang, Y.D. Wang, Q.N. Zheng and J. You 646
Study on the Properties of Epoxy Thermosets Cured by ImHBPs under Lower TemperatureB.H. Zhang, B. Chen, H. Xu and Y.Q. Weng 651
Effect of Thermal Conduction on Tribological Properties of Polytetrafluoroethylene BasedCompositesT. Xie, G. Chen, Y.G. Yin, M.H. Jiao, J.W. Yu, Z.M. Yan and Z.X. Xu 655
A Study on 3D Isolation Effect on High-Rise Building Subjected to Near-Field GroundMotionsJ.P. Liu, L.X. Zhang and Q.L. Meng 659
Study on CH4 Conversion over Ce-Zr Solid Solution Supported Nano Pt-Ni BimetalCatalysts: Preparation and Characterization of Ce-Zr Solid SolutionM. Yang, Q. Dang, Y.S. Li, Z.M. Xie and H.J. Guo 663
The Method of Producing Nanomaterials and Melt Blown Nonwovens CompositesX.M. Qian, X.D. Zheng, H. Zhang and W.M. Kang 667
Effect of Deformation and Annealing on Microstructure and Properties of Composite Cu-10Fe-3Ag WireY. Li, D.Q. Yi, R.Q. Liu and S.P. Sun 673
Erosion Mechanisms of Hydraulic Concretes under High-Speed Abrasive Water Jets atDifferent Impact AnglesY.G. Yin and T. Xie 680
Preparation of Cobalt and Copper Superfine Composite Oxides and Magnetic PropertyW. Zhang, C.P. Zhang and D.J. Shen 687
Effect of Microstructure on Transport Properties of Nano-Polycrystalline La0.7Sr0.3MnO3-DFilmsS.Q. Jiang, X.X. Ma, J.D. Liu, B.J. Ye, Z.H. Wang, Z.H. Zhou and Y. Yi 693
Lower Branched Liquid Crystalline Polyester POSS Used as Collaborative Modifier forEpoxy ResinZ.Y. Yang, S.R. Lu, Z.Y. Huang, C.H. Yu and K. Liu 698
f Advances in Composites
Preparation and Properties of Poly Methyl Methacrylate/Lanthanum HexaborideNanocompositesL.J. Hu, G.H. Min and X. Yang 703
Photoluminescence of Eu3+-Doped TiO2 Thin Films Prepared by Sol-Gel MethodD.H. Wang, X.R. Zhao, H.N. Sun, L.B. Duan and C.L. Chen 707
Novel Cementious Materials from Industrial Solid Waste for Silt Soil SolidificationG.H. Xie, H.Q. Du, S.J. Zhu and Y.J. Xue 711
Research on Earthquake Resistant Materials in Mountain Tunnels Crossing FaultQ. Wang, E.D. Guo, Z.R. Wang and D. Yang 719
Application Study of Nanoparticle-Enhanced Phase Change Material in Ceiling BoardC.X. Guo 723
Studies on the Properties of Epoxy Resins Modified with Novel Liquid CrystallinePolyurethaneZ.Y. Huang, S.R. Lu, Z.Y. Yang, C.H. Yu and D. Guo 727
Toughness Properties of Basalt/Carbon Fiber Hybrid CompositesC.H. Zhang, J.B. Zhang, M.C. Qu and J.N. Zhang 732
Ultimate Strength Analysis of Ship Hulls of Continuous Basalt Fiber Composite MaterialsW. Zhang, W.Y. Tang, Y.C. Pu and S.K. Zhang 736
Influence of Different Sintering System on the Formation of Tricalcium AluminateJ. Xiao, B.G. Ma and H.B. Tan 741
Research of Properties and Preparation on Zero-VOC Acrylic Elastic EmulsionQ. Xu, S.G. Wen, H.B. Liu, J.H. Wang and Y. Shen 745
The Applications of Concrete Cut-Off Wall in the Reinforcement of the Earth DamJ.L. Li, S.C. Li and S.C. Li 749
Experimental Study on Utilization FGD Byproducts in Building BricksX.H. Li, Y.J. Xue and M. Zhou 753
Preparation and Microscopic Analysis of Polyurethane Elastomer Made by SalixpsammophilaJ.T. Huang, Y.B. Li and K.L. Tie 758
The Mechanical Properties of Modified Attapulgite Reinforced Nature Rubber and Styrene-Butadiene Rubber NanocompositesJ.H. Wang, H.B. Liu, S.G. Wen and Y. Shen 762
Experimental Study on Mechanicial Properties of TRC PlateS.L. Xu and Y.Q. Yan 766
The Effect of IrO2 Doping on the Structure and Magnetic and Magnetotransport Propertiesof La0.7Ca0.2Sr0.1MnO3 CompositeF.F. Wei, C.S. Xiong, K.J. Gou, H. Liao and J. Hou 774
Research on Impact Behavior of Reactive Powder ConcreteQ.X. Zhao, Z.Y. Liu, J.R. Zhang and R.R. Zhao 779
Study on the Hydration Micro-Structure and Properties of Complex Cementitious SystemsQ.J. Ding, X.L. Huang and H. Sun 783
Experimental Study on Salt Solution Ingress into Concrete under Capillary Siphon EffectK.L. Ma, Y.J. Xie, G.C. Long and J. Huang 788
Preparation and Mechanical Properties of Nano-SiCp/Mg Composites by UltrasonicDispersionH. Yan and Z. Hu 792
Manufacturing and Mechanical Responses of Ti/APC-2 Nanocomposite Cross-Ply andQuasi-Isotropic Laminates at Elevated TemperatureM.H. Jen, C.K. Chang, Y.C. Sung and F.C. Hsu 796
Tribological Behaviors at High Load of MoSX/Au Films in VacuumG. Wang, X.X. Ma, G.Z. Tang, Y. Liu, S.Y. He and D.Z. Yang 800
New Tin-Functionalized Integrated Rubber for High Performance Green Tire TreadY.B. Xu, N.N. Wang, G.Z. Yu, L. Xu and C.Q. Li 805
Effect of CCWC on the Self-Healing Action and the Microstructure of Cement-BasedMaterialsG.M. Wang, J.X. Zhang and H. Chen 811
Advanced Materials Research Vols. 150-151 g
Effects of CeO2-Rich Mixed Rare Earth on the Mechanical Properties of Al2O3-MulliteBased Foam CeramicsS.J. Ji, X.Y. Guo, J.X. Dong and P. Su 815
Cure Kinetics and Thermal Property of UV-Curable Polyester Nanocomposites CoatingModified with MAP-POSSJ.G. Gao, B.B. Sun and X. Li 821
Experiment Study on Mechanics and Pore Structure of Steel Fibre Reinforced ConcreteY. Wang, D.T. Niu, Y.Y. Miao and N.Q. Jiao 825
Stability and Ageing of Plasma Treated Wood/Polyethylene Composites SurfacesM.W. Di and Y. Liu 829
Rheological Properties of PTT/POE/OMMT CompositesM.T. Run, L.J. Guo, Q.C. Zhang, Y. Zhong, Q. Han and Y.P. Hao 834
Preparation and Properties of the PTT/ABS/SCF CompositesM.T. Run, H.S. Zhang, X. Li and F.Y. Cui 838
Experimental Study on Precracked RC Beams Strengthened with Externally Bonded CFRPSheetsJ.F. Dong, Q.Y. Wang and Y.M. Zhu 842
Investigation on Microstructure and Properties of Heavily Cold Rolled Cu-Fe AlloysZ.M. Zhou, L.W. Tang, M.M. Cao and B.B. Lei 847
Structure and Antibacterial Activity of Copper-Carried Zirconium PhosphatesQ.S. Shi, S.Z. Tan, Y.S. Ouyang, Q.H. Yang, A.M. Chen, W.R. Li, X.L. Shu, J. Feng, J. Feng andY.B. Chen 852
A Novel Nanocomposite Based on Recycled Poly(Ethylene Terephthalate)/ABS Blends andNano-SiO2G. Shi, L.J. He, C.Z. Chen, J.F. Liu, Q.Z. Liu and H.Y. Chen 857
The Experimental Studies on the Prepartion of Steel Slag Cement by Gas Quenching SteelSlagY. Long, Y.Z. Zhang, H.W. Xing, J.G. Li, G.L. Li and Y.B. Lei 861
In Situ SiCp/Al-4.5 wt.% Cu Composites Obtained by Direct Reaction SynthesisY.F. Liang, J.E. Zhou, S.Q. Dong and T. Yang 868
Thermal Stresses in a ZrO2/FGM/Ti-6Al-4V Composite ECBC Plate with Temperature-Dependent Material PropertiesD.H. Tu, Y.J. Xu and J.H. Jia 873
Thermal and Mechanical Properties of Boron-Containing Bisphenal-A Formaldehyde ResinCompositesJ.G. Gao, X. Li and B.B. Sun 877
Wear Behavior of Fe-Based Coating Fabricated by Plasma Thermal SprayingC.P. Jiang, J.Z. Pei and J.M. Hao 881
Utilization of CFB Fly Ash in Eco-Cement: Mechanical Properties and MicrostructuralAnalysisX.M. Liu, Y. Li, L.L. Zhang and D.Q. Cang 885
Thermodynamics of Solvent Extraction of Perrhenate with N235 at High ConcentrationK.X. Jiang, D.W. Fang, H. Wang, B.X. Wang, Y. Xiong and Y.C. Zhai 890
A Study of Numerical Simulation and Experiment Investigation on ECMM Processing ofPRMMCG.Y. Liu, Z.N. Guo, Y.B. Li and Z.G. Huang 895
Effects of PHZ and TiO2 on Image Properties of Silver Film Based on PhotothermographicMaterialsY.L. Li, Y.M. Chen, G.F. Liu and G.Q. Zhang 903
The Structural and Morphology of (La0.7Sr0.3)MnO3 Thin Films Prepared by Pulsed LaserDepositionW. Rao and J. Yu 908
Study on Adsorption Mechanism and Dehumidification Property of Composite DesiccantC.X. Jia 912
In Situ Growth of Hydrophobic TiO2 on Calocedrus macrolepis Kurz Wood Surface Using aCosolvent-Controlled Hydrothermal MethodS.X. Liao, P. Zhang, K. Li and Q.F. Sun 917
Fabrication of ZnO Nanodot Arrays by Sol-Gel within AAO TemplateB. Gao, H.M. Zhang, X.J. Li, G.F. Hu, Y.J. Li and Y.J. Zhu 921
h Advances in Composites
Relation between Interfacial Strength and Impact Properties of UHMWPE/LLDPELaminatesL. Chen, J.L. Li, Z.W. Xu and L.S. Liu 926
The Experimentation and Imitation Study on Flow Field of Coherent JetK. Liu, R.Z. Han and C. Yang 930
Experimental Study on Dynamic Collision Characteristics of ConcreteQ.W. Ma, L.N. Yun, S.P. Ma and H.T. Wang 937
Study on Network Structure C-Cu Composites of Pantograph Slide PlatesQ. Wei, L.X. Xu, H.J. Shi, L.F. Shao and X.Z. Hao 941
The Electrochemical Behavior and Microstructure of Chromium-Free Passivation Film onGalvanized SteelY.P. Li, L. Wu and M. Liu 947
Preparation, Characterization and Thermal Properties of Polyacrylonitrile/Alpha-Zirconium Phosphate Nanocomposites by Gelation/CrystallizationD.D. Yang, H.P. Xu, L.P. Zhu and Y.H. Wu 951
Cyclic Voltammograms of Chlorophenol Oxidation on Boron-Doped Diamond ElectrodeF.B. Liu, G.P. He and M. Zhao 956
Effects of Thermal Cycling and Freezing after Water Absorption on Tensile Properties ofGreen CompositesH. Kim, M. Sakiyama and K. Takemura 961
Study on Curing Behavior of Low Molar Ratio Urea-Formaldehyde Resins with DifferentCuring AgentsY.H. Dong, Q. Gao, Y. Zhang and J.Z. Li 965
Study on Properties of Thin Layer Skid-Resistance Material in Tunnel PavingH.Q. Chen and B.M. Tang 969
Effect of Elements on Hot Tearing of Directionally Solidified Ni-Based SuperalloysY.L. Wang, Z.H. Huang, X.H. Zhao and J.R. Li 975
Tribological Behavior of La2O3 Particulate Reinforced Copper Matrix CompositesR.G. Zheng, Z.J. Zhan, B. Liang and W.K. Wang 979
The Geometric and Electronic Structures of Fen-1Si(n=2-7) ClustersS.Q. Yu, L.H. Dong and Y.S. Yin 984
Synthesis of Latent Curing Agent for Epoxy ResinX.J. Zhang, S.M. Kang and Z.Q. Liu 988
Improved Photoluminescence from Ar+ and N+ Ions Co-Implanted Porous SiliconX.Y. Lv, J.Q. Mo, F.R. Zhong, Z.H. Jia, M. Xiang and T. Jiang 992
Compressive Strength and Splitting Tensile Strength of Polyvinyl Alcohol Fiber ReinforcedUltra High Strength Concrete (PFRC)C.W. Yan, J.Q. Jia, J. Zhang and R. Jiang 996
Friction and Wear Behaviour of Al2O3 Particulates Reinforced Al-Mn Alloy MatrixCompositesX.M. Li, B. Liu, W.L. Sun and X. Liu 1000
Crack Resistance of Connections of Cross Shaped Steel Encased Ultra High-StrengthConcrete Column to RC Beam under Cycle LoadsC.W. Yan, J.Q. Jia and J. Zhang 1005
Water Permeability of Polyvinyl Alcohol (PVA) Fiber Reinforced Cementitious CompositesS.G. Liu, C. He, C.W. Yan and X.M. Zhao 1009
Experimental Study on Flexural Strength of Polyvinyl Alcohol (PVA) Fiber ReinforcedCementitious CompositesS.G. Liu, C. He, C.W. Yan and H.J. Jiang 1013
Preparation of EG-g-MWCNTs and Antistatic Poly(Ethylene Terephthalate)NanocompositesR.X. Wang, H. Wang, X.Y. Tian, Q. Yan, K. Zheng and L. Wang 1017
Analysis of Effection of the Prestressing Force on Shear Lag in Curved Box GirderY.H. Zhang and J.S. Zhang 1022
Prediction of the Strength Development of Fly Ash ConcreteM.H. Liu and Y.F. Wang 1026
The Preparation of Coatings with Codepositon Plating on A3 Steel and its CorrosionResistanceS.D. Chen, T. Sun and H. Nian 1034
Advanced Materials Research Vols. 150-151 i
Factor Analysis of Cracks Generated in 22CrMoH Steel GearJ.S. Sheng and S.J. Dai 1039
Effect of Substrate Temperature on the Haze and Properties of SnO2: F Thin Film Coatedon Glass (FTO) by Spray Pyrolysis ProcessQ.N. Zhao, S. Wu and D.K. Miao 1043
A Hot-Melt Thermosetting Phenolic Prepreg and its CompositesB. Liang, L.X. Chen, J.N. Dong, H.X. Zhao and F.F. Liang 1049
Modeling Corrosion Property of High Chromium Cast Iron under H3PO4 MediumCondition Using Artificial IntelligenceS.M. Zhang and L.J. Xu 1054
Regeneration of IMAC-Cu Proteinchip by Borate EluentY. Cai, T. Du, S.L. Zhao and J.B. Wen 1058
The Research on the Mechanical Property of CBF/PP Composite BoardF.F. Zhu, Z.L. Zhong and Z.F. Guo 1063
Effect of Sintering Temperature on the Properties of Sludge Ceramics and Fly-AshCeramicsM. Yue, Q.Y. Yue and Y.F. Qi 1068
Nanocrystalline NiO Thin Film Prepared by Sol-Gel ProcessS.L. Zhao, J.N. Zhu and Z.Y. Wu 1073
Preparation and Properties of Al2O3 Ceramic Reinforced Mo-Based Composites byAl(NO3)3 PrecursorL.J. Xu, S.Z. Wei, G.S. Zhang, J.W. Li, X.D. Ma and B.Z. Dai 1077
Tearing Analysis of Coated Fabrics under Mono-Axial Tensile StressesZ.J. Liu, X.M. Qian and S.H. Chen 1082
Study and Application on Quick Repair Materials for Concrete PavementL. Wang, F. Li, W.L. Tian and P. Chen 1087
Study of the Bonding Property between Flanges and Web Plates of Wood I-JoistX.J. Zhang, Y.C. Hu and Y.C. Fang 1092
Effect of the Simplifcation to Structural Systems on Nonliner Performance of Tall BuildingsW.X. Du and L.X. Zhang 1096
Design and Choose Durability Assessment Parameter of Concrete in Salt Soil RegionH.X. Qiao, H.F. Yu and Z.M. He 1101
Effect of Various Nanoparticles on Friction and Wear Properties of Glass Fiber ReinforcedEpoxy CompositesY.K. Wang, L. Chen and Z.W. Xu 1106
Microstructure and Thermal Properties of Diamond-Al Composite Fabricated byPressureless Metal InfiltrationY. Cui, S.B. Xu, L. Zhang and S. Guo 1110
Preparation and Properties of Rigid Polyurethane-Imide FoamsX.M. Sang, X.G. Chen, S.W. Yu and G.X. Hou 1119
Preparation of Rigid Polyurethane-Imide FoamsX.M. Sang, X.G. Chen, G.X. Hou and S.W. Yu 1123
Kinetic Study on the Preparation of Poly(Phenylene Sulfide Ether)A.Q. Gu, Z.C. Li, L.J. Xu and Z.L. Yu 1127
Properties of Particleboard Manufactured with Modified Urea-Formaldehyde ResinJ.Z. Zhang, J.Z. Li and S.F. Zhang 1135
The Effect of Thermal Aging on Tensile Strength of Three-Dimension and Five-DirectionBraided Carbon Fiber/BMI CompositesQ.W. Guo, J.L. Li, G.L. Zhang, Y.H. He, M. Zhang and L. Chen 1139
The Influence of Purification of Ethyl Acrylate on the Properties of Cement MatrixC. Lee, N.F. Wang and M.X. Xiem 1143
Decoloration of Methyl Orange by Mineral-Catalyzed Fenton-Like System of NaturalSchorl and H2O2Y. Li and H.Y. Xu 1152
A New Formula of Voids in the Mineral Aggregate (VMA) of Hot Mix Asphalt (HMA) andits ApplicationS.T. Liu, C.S. Shao, W.D. Cao and X. Liu 1158
j Advances in Composites
Carbon Nanotubes Reinforced Aluminum Matrix Composites by High-Energy Ball MillingX.F. Wang and X.L. Cai 1163
Preparation and Test of Polyurethane Foam Composites with Alkali Lignin/Renewable PUFC.Y. Li and L.L. Liu 1167
Effect of Silane Concentrations on Mode I Interlaminar Fracture of Woven Silk/EpoxyCompositesR. Zulkifli and C.H. Azhari 1171
Experimental Study of Elastic Modulus of Crumb Rubber Plastic ConcreteM. Zhou, X.M. Yang and K. Song 1176
Performance Evaluation of Large Stone Porous Asphalt-Rubber MixtureW.D. Cao, Z.Y. Yao, Q.S. Shang, Y.Y. Li and Y.S. Yang 1184
The Investigation of Ultrahigh Pressuer Sintering of Cubic Boron Nitride with the BindingAgent of Si3N4S.J. Lin, Y. Wu, Z.G. Zou and Y.F. Shen 1191
Preparation and Characterization of LPAAM Superabsorbent CompositeJ.J. Xie, X.J. He, H.Y. Zhang and X.Q. Han 1195
Strategic Thinking of Construction Material Based on EcologyH. Pang, B. Zhao and X.M. He 1199
Effect of Dry-Wet Circulation and Temperature Change on Properties of Polyurea CoatingsP. Lv, X.M. Li and W.B. Huang 1203
Mechanical Property Effect of Na2SO4 on Cement-Reclaimed Asphalt Pavement MixtureH.F. Wang, B.G. Ma and X.B. Yin 1209
Effect of Super Slag Powder on Pore Structure and Compressive Strength of RPCP. Zhang, Q.Y. Li, T.J. Zhao and X.X. Xue 1214
Preparation and Analysis of Kaolinite Intercalated by Potassium AcetateX.M. Du, Q.F. Liu and H.F. Cheng 1220
Technology of Processing Mineral Superfine Powder Used in High Performance Concreteby DHM Grinder and its CharacteristicsX. Xu, H. Ding, N. Liang, B.K. Wang and X.J. Zhang 1225
Experimental Research on Shape Retention of Tackified Woven FabricsF. Sun, L. Chen and Y.F. Zhang 1230
Formation Mechanism of AlZrO and ZrAlON Phases in Al-ZrO2-N2 SystemsR.L. Wang, J.L. Sun, J.L. Bu and Z.F. Wang 1234
Kinetics and Mechanism of Mo(VI) Extraction with Trialkyl Amine Using a ConstantInterfacial Cell with Laminar FlowK.X. Jiang, Y. Xiong, X.F. Wang and Y.C. Zhai 1239
Discovery of Zr-Al-Ca-O Phase in Zr-Al-Ca-O-N Composites and its SynthesisR.L. Wang, J.L. Sun, J.L. Bu and Z.F. Wang 1245
The Mechanisms of Epoxy Latex Coatings Curing at Ambient Temperature Comparisonwith Solvent-Type OnesQ.Q. Guo, D.G. Li, J.W. Guo and H.Q. Chen 1249
Quantum Chemical Calculation of Propylene Oxide Ring-Opening EsterificationM. Zhang, W.C. Huang, Y. Qin and Z.X. Huang 1254
Mesoporous Carbon with CNT Skeleton and their Electrochemical PropertiesY.T. Chen, X.H. Chen, B. Yi, K.M. Guo, Y.F. Chen, B. Zeng and H.M. Yan 1258
The Effect of the pH Value of Wood on the Curing Reaction of Low Toxic Urea-Formaldehyde ResinL.B. Zhu, J.Y. Gu, Y.H. Zhang and J. Shen 1263
Characterization and Photocatalytic Properties of Porous BiVO4-SiO2 CompositesY.D. Zhang, X.J. Su, G.L. Hou, S. Bi, F. Guo and Z.X. Mei 1267
Synthesis and Characterization of Gomuti-Graft-Polyacrylamide FlocculantsY.S. Xie, W. Wang and W. Li 1272
High-Performance Rust Converter with a Formula Based on Polyphosphoric Acid andTannic AcidX.Q. Fan and X.D. Zhao 1277
Flexural Vibration in a Ternary Locally Resonant Phononic Crystal Thin Plate with DefectsZ.J. Yao, G.L. Yu, Y.S. Wang and J.B. Li 1282
Advanced Materials Research Vols. 150-151 k
Effect of RE on the Mechanical Properties of 7075 Al AlloyJ.H. Zhong, K. Feng, H.B. Zhu and Y.P. Xiao 1286
First Principles Calculations of Optical Properties of Cu3N and Cu4NJ.G. Niu, W. Gao, X.P. Dong, L. Guan and F. Xie 1290
Preparation and Properties of Silicon-Corundum-Silicon Nitride CompositesJ.C. Wei and J.B. Tu 1294
Development of IPMC Actuator for Flapping Motion of DragonflyT.H. Cheng, D.J. Xuan, Z.Z. Li and Y.D. Shen 1301
Effects of Vacuum Annealing on Microstructure and Magnetostriction of TbDy-Fe GMFsB.Y. Zhou, H.B. Luo and S.H. Chen 1305
Experimental Study on Improving Abrasion Resistance of Sizing Crusher ToothY.T. Pan and Y.Z. Li 1311
Preparation and Characterization of the Tri-Channel Hollow Fiber Charged MosaicMembraneJ.M. Deng, J.D. Liu, H.Q. Zhang, Y.T. Zhang and C. Dong 1315
Shear Reinforcement of Air Plasma for GFRP-Wood CompositeY.L. Xiong, J.Y. Gu and Y.C. Hu 1321
Microstructure and Properties of Fe/Al2O3 Gradient Coatings on Steel SubstrateJ.F. Liu, Z. Wang, Y.S. Ding and G.P. Shi 1325
Toughening of Thermosetting Resins with Thermoplastic Polyimide: Thermal,Morphological, and Mechanical CharacterizationD.M. Wang, X.G. Zhao, H. Jia, X.H. Yu, Q.M. Li, L.N. Wang, H.W. Zhou, G.D. Dang and C.H.Chen 1330
Comparison of Hollow-Porous and Solid Carbon Fibers as Microwave AbsorbentsW. Xie, H.F. Cheng, Z.Y. Chu, Z.H. Chen, Y.J. Zhou and C.G. Long 1336
Creep Modeling for Concrete Filled Steel Tubular Members Compressed with a LargeEccentricityB. Han, Q. Wang and Y.F. Wang 1343
Monte Carlo Simulation of Magnetic Properties of Multilayer with Amorphous SurfacesQ. Feng, Z.G. Huang and Y.W. Du 1352
Simulation of Fabrication for Single-Phase Al2O3 Ceramic Tool Materials at DifferentFabrication TemperatureB. Fang, C.Z. Huang, C.H. Xu and S. Sun 1358
Effect of Arc Discharge on Friction and Wear Behaviors of Stainless Steel/Copper-Impregnated Metalized Carbon Couple under Electric CurrentT. Ding, G.X. Chen, M.X. Shen, M.H. Zhu and W.H. Zhang 1364
Experimental Study on Flexural Fatigue Property of Ultra-High Toughness CementitiousCompositesS.L. Xu and W. Liu 1369
Experimental Research on Residual Strength of Recycled Aggregate Concrete underCompressive Fatigue LoadingH.B. Zhu and X. Li 1379
Sputter-Deposited Nano-Metal Films in a Short Period for Electromagnetic ShieldingTextilesW.Q. Du, F. Yu and H.J. Qi 1383
Preparation and Electrochemical Performance of SnO2/Graphite/Carbon NanotubeComposite Anode for Lithium-Ion BatteriesC.Z. Yang, G.Q. Zhang, L. Zhang and L. Ma 1387
Influence of Substrate Temperature on Silicon Nitride Films Deposited by R.F. MagnetronSputteringF. Gao, Q.N. Zhao, X.J. Zhao and Y.H. Dong 1391
Effect of Beeswax on Functional and Structural Properties of Soy Protein Isolate FilmsX.H. Li, K. Guo and X.Y. Zhao 1396
Experimental Study on Effects of Temperature on Characteristic Parameters of CFRP-Confined Concrete PrismsY. Zhang and Z.S. Xu 1400
HDPE/UHMWPE Blown Films Modified by POE and CaCO3J.D. Zuo and S.M. Liu 1405
l Advances in Composites
Investigation of Microstructure and Property of Fe3Al/Al2O3 CompositesT. Jiang 1409
Cure and Dynamic-Mechanical Behaviors of Vinyl Ester Resinfilled with Multi-WalledCarbon NanotubesH.Y. Chen, Z.X. Kong and J.H. Wang 1413
Nanoparticle/Epoxy Nanocomposites: Impact, Flexural and Thermal PropertiesL. Chen, Z.W. Xu, J.L. Li and G.W. Chen 1417
The Preparation of TiO2 Film Loaded on Fiberglass Mesh and the Experimental Study onIts Photocatalytic PropertiesM. Wang, W. Chen and C. Liu 1421
Nondestructive Testing of Mechanical Properties of Pine Laminated Veneer LumberB. Xue and Y.C. Hu 1425
Microstructure and Properties of Fe-Based Laser Cladding Coatings Reinforced by In SituSynthesized Multiphase Ceramic ParticlesG.H. Li, Y. Zou, Z.D. Zou and X.W. Dong 1429
Study on the Processing Technology of Bamboo Mat/Bamboo Particle Composite BoardX.G. Li, N. Hu and Y.Q. Wu 1433
Effects of Different Pretreatments of Wood Fiber on Mechanical Properties ofBiodegradable CompositeY.Q. Wu, Z.Y. Qin, Y. Qing and X.G. Li 1438
A Simple Experimental Method to Simulate the Fracture and Faults in EarthquakesK. Kida 1444
Analysis on Dynamics Characteristics of ICPF for Micro-RobotL. Nie, X.L. Zhang and R. Nie 1448
Novel Antibacterial Nanofibers of Chitosan and Polyurethane Prepared by ElectrospinningW.M. Kang, B.W. Cheng, Q.X. Li and F.F. Zuo 1452
Investigation on the Property and Air Void Structure of Foamed Cement-Fly Ash-Steel SlagConcreteY.H. Fang, Q. Wen and P. Dai 1457
Effect of Zr on Thermal Stability of Cu-Fe In Situ CompositeJ.Q. Guo, H. Yang, P. Liu, S.G. Jia and L.M. Bi 1462
Preparation and Properties of PLLA-co-bis A/VMT NanocompositesY.L. Bai, H. Xu and Z.P. Mao 1466
Effect of Gd Substitution on the Dielectric Properties and Magnetoelectric Effect of BiFeO3G.L. Song, T.X. Wang, C.J. Xia, C. Li and F.G. Chang 1470
Study on Synthesis of Methyl Methacrylate/Styrene Copolymer by SuspensionPolymerizationH.X. Feng, J.Q. Zhang and S.L. Liu 1476
Synthesis and Thermal Property of Poly(Allylamine Hydrochloride)H.C. Zhao, X.T. Wu, W.W. Tian and S.T. Ren 1480
Coated Hydrophilic Thin Film on Glasses Using Freeze Drying-Assisted Sol-Gel Techniquefor Self-Cleaning Building MaterialsT. Lin and X.C. Zhang 1484
Anti-Shear Reliability Analysis of Existing Pretension Prestressed Concrete Beam Bridgesin the Corrosion Environment with Acid RainF. Chen, S.H. He, D.L. Hu and B.Y. Huang 1488
Residual Deformation Behavior of Reinforced Rock-Fill MaterialsY.L. Lin, M.X. Zhang and X.X. Li 1495
Study on Synthesis and Thermal Property of PolyvinylamineH.C. Zhao, Q. Li, W.Y. Xu and F. Huang 1500
Synthesis and Thermal Property of Linear Chloromethylated PolystyreneH.C. Zhao, J.L. Guo, J.T. Li, L.L. Gao and C.C. Bian 1504
Theory and Experiment of Isotropic Electromagnetic Beam Bender Made of DielectricMaterialsQ.B. Deng, J. Hu, Z. Chang, X.M. Zhou and G.K. Hu 1508
Research on the Strength Properties of the Magnesium Phosphate Cement (MPC) under theSub-Zero Temperature EnvironmentH.T. Wang, M. Xue and J.H. Cao 1517
Advanced Materials Research Vols. 150-151 m
Study on the Performance of Buckling-Restrained Brace with Low Yield Strength SteelY.H. Xu, A.Q. Li and Y.N. Huang 1521
Fabrication and Mechanical Characterization of nmSiO2/EP Composites by Shock WaveMethodG.Y. Lin, D.W. Qu and Y.X. Fu 1525
Factors Effect on Grain Refining of Nanocrystalline Copper Fabricated by ExplosiveLoading and its Dynamic Mechanical PropertyJ.X. Wang, N. Zhou and Z. Zhao 1530
Synthesis and Polymerization Kinetics of Copolymer Styrene-Vinyltrimethoxysilane byEmulsifier-Free Emulsion PolymerizationH.C. Zhao, L.L. Gao, S.S. Gao and J. Shi 1537
Processing Parameter Optimization of Flax Fiber Reinforced Polypropylene CompositeJ. Zhang, S. Li and X.M. Qian 1541
Study on Electrodeposition of Ni-Graphite Composite Coatings in Sulfamate BathX.Z. He, X.W. Zhang, X.L. Zhou and Z.H. Fu 1546
Synthesis and Characterization of Poly(Styrene/n-Butyl Acrylate/Vinyltrimethoxysilane) byEmulsifier-Free Emulsion PolymerizationH.C. Zhao, L.L. Gao, Q.F. Li and J.L. Guo 1551
Effect of Ni2+ on Chromium Electrodeposition in Cr(III) Plating BathX.Z. He, X.L. Zhou and X.W. Zhang 1555
The Super-Capacitor Properties of Aligned Carbon Nanotubes Array Prepared by RadioFrequency Plasma-Enhanced Hot Filament Chemical Vapor DepositionY.M. Chen and H.Y. Zhang 1560
Immobilization of MSWI Fly Ash with GeopolymersM.T. Jin, C.J. Huang, L. Chen, X. Sun and L.J. Wang 1564
Energy Properties of Building Structures Subjected to Strong EarthquakeJ. Zheng, B. Chen and C.Y. Ye 1570
Interface Study of Short Mullite Fiber Reinforced Al-Cu-Si Alloy CompositesJ.P. Long, W. Li, S.H. Chen, J.H. Lin and Y. Zeng 1574
Damage Detection of Steel Domes Subjected to Earthquakes by Using Wavelet TransformJ. Zheng, B. Chen and C.Y. Ye 1580
Combustion Synthesis of TiC-Fe Coating on Surface of a Plane IronH. Zhao, Z. Wang and G.D. Shi 1584
Properties of Lightweight Concrete Masonry Units Made from Lightweight AggregatesC.W. Tang, K.H. Fan, W.P. Tsai and H.J. Chen 1588
Influence of the Magnetic Interaction among Particles on Distributions of Magnetic FluidsUsing Computer SimulationsX.L. Peng, H.B. Wei, X. Yang, R.P. Yue and H.L. Ge 1595
Preparing and Characterization of the Geopolymer Based on Desulfurization Ash and FlyAshJ.X. Xie, J.J. Chen and J.Z. Xu 1599
Reaction Behavior between Li and NiO Thin Film by EISY. Cai, Z.Y. Wu, S.L. Zhao and J.N. Zhu 1603
Photocatalytic Activities of Visible-Light-Driven TiO2 Films Codoped with Aluminum andNitrogenX.L. Cheng, S.J. Hu, Y.J. Hu, L. Yu and Z.G. Wei 1607
Design Method for Braiding Process and Structure Parameters of Three Dimensional Two-Step Tubular Braided PreformY. Gao and J.L. Li 1613
Deposition of ZnO:Al Thin Films by Ultrasonic Spray PyrolysisL. Dong, T.F. Pei, H.Q. Li and D.Y. Xu 1617
Study on Material Selection and Manufacturing Process of Wind Turbine BladesJ. Xu, W. Zhang and C.X. Wang 1621
Tunable Multimode Filtering of Solid Acoustic Waves in a Three-Component PhononicCrystal SlabJ. Li 1625
In Situ Fabrication and Properties of Mg2Si/AZ91D Magnesium Matrix CompositesX.Y. Wang, Y.T. Zhao, G. Chen, S.L. Zhang and X.N. Cheng 1640
n Advances in Composites
Applications of Biorthogonal Non-Tensor Trivariate Wavelet Traits in ConstructionEngineering ManagementY.H. Lv and Y.M. Yu 1644
Research on Structure Stress Analysis on Composite by Lock-In ThermographyX. Liu, J.Y. Liu and J.M. Dai 1649
Study on Modification of the Magnesium Phosphate Cement-Based Material by Fly AshD.X. Li and C.H. Feng 1655
Electrochemical Copolymerization of Triphenylene and 3, 4-Ethylenedioxythiophene andCharacterization of the CopolymerW. Lei, X.G. Xie, F.Y. Wang and M.Z. Xia 1662
Surface Intergrity of Inconel 718 under MQL ConditionC.H. Che Haron, J. Abd Ghani, M.S. Kasim, T.K. Soon, G.A. Ibrahim and M.A. Sulaiman 1667
Effect of Binary Admixture of Fly Ash and Slag on the Carbonation of Concrete forHydraulic StructureX.Y. Li, D.Q. Zhang, C. Wang and S.J. Zhang 1673
Open-Air Storage Time Impact on Performance of PSP Used as Concrete AdmixtureY.Q. Lin, Y. Shi, J.Z. Li and H.Q. Yang 1677
Modification of Grooved Paulownia Wood SandwichL. Wan, W.Q. Liu and H. Fang 1683
Preparation and Mechanical Properties of Polyurethane Elastomer with Two Soft Segmentsof HTPB/PTMGH.T. Tao, X.J. Liu and T.N. Ma 1689
Application of the Calculator Technique in the Ability about the MMCs of the Anti-VibrationH.T. Gao, S.H. Meng, Z.Y. Cao and L.N. Xu 1693
Degradation of Orange IV Dye Solution Catalyzed by PVDF/ Fe3+/Cu2+ Membrane in thePresence of H2O2Y.J. Zhang, L. Li, L. Zhang and J. Ma 1697
In Situ Preparation of Magnetic P(AOS-St-BA)-Coated CoFe2O4 Composite Microspheresin Soapless EmulsionW. Liu, C.H. Zhou, G.Q. Xu and Y. Feng 1701
Degradation of Orange IV Dye Solution Catalyzed by PVDF/Fe3+-TiO2 Catalytic Membranein the Presence of H2O2Y.J. Zhang, L. Zhang, X.F. Ma, L. Li and J. Ma 1705
Application of S2O82-/FexOy Solid Super Acid as a Heterogeneous Fenton-Like Catalyst for
the Degradation of Orange IV in WaterY.J. Zhang, Y.X. Tian, D.P. Li, G.R. Liu, L. Zhang, L. Li and J. Ma 1710
Abrasion-Resistance at High Temperature of HVOF-Sprayed WC-12Co Coating on H13J. Lan, B. Zhang and L. Hua 1714
Solid Super Acid of S2O82-/FexOy-CuOx Catalytic H2O2 to Remove Organic Pollutants in
WaterY.J. Zhang, G.R. Liu, D.P. Li, Y.X. Tian, L. Zhang, L. Li and J. Ma 1722
P. aeruginosa Inactivation with Silver and Nickel Doped TiO2 Film Coat on Glass FiberRivingK. Ubonchonlakate, L. Sikong, T. Tontai and F. Saito 1726
The Thin Sheet Metal Rubber Pad Stamping for PEM Fuel CellJ. Lan, Y. Liu, X. Wei and L. Hua 1732
Hydration Mechanism and Performances of Tri–Cementitous Materials SystemCompounded with Clinker Limestone Powder and Fly AshY.F. Hou, T.Y. Huang and S.M. Song 1741
Effect of Annealing Conditions on Microstructure Evolution of NiMnFeGa Shape MemoryThin FilmH.B. Wang, L. Ma and W. Cai 1745
Experimental Investigations of Shear Lag Effect in Orthotropic Composite Box BeamY.P. Wu, Y.H. Wang, L.X. Wang and Z.G. Bian 1750
Mechanical Property of Phosphoaluminate CementP. Liu, Z.W. Yu, L.K. Chen and Z. Ding 1754
Advanced Materials Research Vols. 150-151 o
Synthesis and Properties of Fluorinated Polyimide Films Based on 1,2,3,4-Cyclobutanetetracarboxylic DianhydrideY.H. Lu, W.J. Kang, Z.Z. Hu, Y.F. Wang and Q.X. Fang 1758
Preparation of Cation Exchange Fiber by Preradiation-Induced Grafting of Acrylic Acidwithout Removal of the InhibitorJ.F. Wei, K.Y. Zhao, H. Zhang, X.L. Wang and L. Chen 1764
Microstructure and Mechanical Properties of Sn-Bi Alloy Treated in the Semi-Solid Stateby Mechanical Stirring ProcessF. Li, Y.J. Hu, X.L. Cheng and X.T. Xiao 1768
Research on Sodium Citrate for Pulse Electrodeposition ZnSe Thin FilmsC.G. Zhang, X.L. Yang and J. Miao 1772
Influence of Tunnel Excavation on Adjacent Underground PipelineJ.L. Liu and J.Q. Liu 1777
Influence of Rare Earth Oxides on Crystallization Behavior and Sintering Performance ofFused Quartz Ceramic MaterialsJ.L. Bu, F. Ma, Y.H. Zhang, H.Y. Zhao, R.L. Wang and Z.F. Wang 1782
Effect of Nano-Oxides on Sintering and Crystallization of Fused Quartz Ceramic MaterialsY.W. He, Z.F. Wang, F. Ma, J.L. Bu, H.Y. Zhao and R.L. Wang 1786
Research on the Dissolving Character of Active Si/Al in Fly Ash Activated by AlkaliH. Li, S. Shi, D.L. Xu, L.J. Zhuge and L.L. Zhang 1790
Effect of Annealing Temperature on Properties of ZnO Thin FilmsD.P. Zhang, P. Fan, Z.H. Zheng, X.M. Cai, L. Mao, T.B. Chen and J.R. Chi 1796
Effect of Bamboo Fiber Modification on Tribological Performance of Brake CompositesF.S. He, C.H. Gao and S.Y. Ye 1801
Study on Friction Properties of Cu-Fe-Based Powder Metallurgy Materials under Dry andWet Friction ConditionsR. Fu, F. Gao and B.Y. Song 1806
Study on the Mechanical Properties and Handle of PTT/Wool Blended FabricsG.B. Xu, L.Y. Zhao and F.M. Wang 1810
Analysis of the Mineral Components and Strengths of the Cementuous Materials Producedwith Iron TailingsW.Y. Liu, C.H. Zhang, X.L. Xu, Y. Zhang and S.A. Yan 1814
Finite Element Simulation of Tensile Behaviors in the Elastic Region for PP/Nano-TiO2CompositesY.J. Wu, M.R. Gao, Y.L. Chen, J. Li and S.L. Ju 1819