Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
19 Subject to technical modifications without notice. © 2006
TANDEM plus 562H full extension drawer runners
Dimensions in millimeters (inch equivalents as noted)
Description Basic components
- Full extension concealed drawer runners - Available with integrated BLUMOTION- For 16 (5/8") max. drawer side thickness- Rear tilt adjustment- Concealed roller carriages with permanently lubricated synthetic rollers create a smooth running action- Locking devices enable easy drawer insertion and removal- Force guided right side and ±1.5 (1/16") tolerance compensating left side- Dynamic weight capacity of 75 lb- Static weight capacity of 100 lb
Components
Runner profile
Locking device
Rear mounting bracketfor face frame only
For overall cabinet depth
Drawer length Over extension TANDEM plus
TANDEM plus BLUMOTION
381 (15") 305 (12") 0 562H3050C 562H3050B457 (18") 381 (15") 0 562H3810C 562H3810B533 (21") 457 (18") 6 (1/4") 562H4570C 562H4570B610 (24") 533 (21") 16 (5/8") 562H5330C 562H5330B
Other applications
Profile set
Note: These runners are for 16 (5/8") max. drawer side thicknessOne set required per drawer
Overlay application
Rear mounting bracket for frame cabinets
612TH295.3750Non-handed bracket
Installation screws
- One right and one left required per drawer- Minimum interior drawer width 121 (4-3/4")- Height adjustable +3 (1/8")
Standard locking device
T51.1700.04 LT51.1700.04 R
LeftRight
612THInstallation screwspage 14Installation
For use when installing TANDEM runners in face frame cabinets. Not necessary for panel cabinet installation.
Using TANDEM page 13 Drawer preparation page 14
- Two required per drawer- Depth and side-to-side self-alignment- Zinc-plated steel
pg. 27 pg. 32pg. 31 pg. 39Inset drawer Roll-out tray Bottom mount pg. 35ORGA-LINE Deep drawerpg. 29Narrow drawer
Accessories page 45 Assembly aids page 47
25 (31/32")
37 (1-7/16")
32 (1-1/4”)
33 (1-5/16”)
6 (1/4”)
9 (11/32”) typ.10 (3/8")
37 (1-7/16")
Profile length
A
B
9 (11/32") typ.
4 (5/32") Setback
Inside cabinet depth
295.3750
Rearmountingbracket
Min. topclearance
6 (1/4") Inside cabinet width
Drawer width
Ope
ning
13 (1/2”) Bottom recess
Drawer side thicknessmaximum 16 (5/8”)
14 (9/16”)Bottom clearance
37
(1-7
/16"
)
21 (13/16")
Drawer height maximum =
opening minus 20 (13/16”)
System or #7 profilemountingscrews
page 45
7 (9/32")
11 (7/16")
Ø6 x 10 bore for hook
33 (1-5/16") minimum rear notch
12
Face frame rail
Face
fram
e st
ile
1632
14 (9/16")
(1-1
/4")
(5/8
")(3
/32"
)2
21(13/16")
(15/32")
Subject to technical modifications without notice. © 2006 20
Drawer and cabinet specifications
Dimensions in millimeters (inch equivalents as noted)
Profile close-up
TANDEM plus TANDEM plus BLUMOTION
Drawer length
Inside cabinet depth with bracketProfile length
System screw locations
Maximum Minimum A B
562H3050C 562H3050B 305 (12") 369 (14-9/16") 326 (12-7/8") 317 (12-1/2") 165 (6-1/2") 261 (10-1/4")
562H3810C 562H3810B 381 (15") 446 (17-9/16") 403 (15-7/8") 394 (15-1/2") 165 (6-1/2") 357 (14-1/16")
562H4570C 562H4570B 457 (18") 522 (20-9/16") 479 (18-7/8") 470 (18-1/2") 261 (10-1/4") 453 (17-13/16")
562H5330C 562H5330B 533 (21") 598 (23-9/16") 555 (21-7/8") 546 (21-1/2") 261 (10-1/4") 517 (20-3/8")
Note: For frame applications. Minimum 3 screws per bracket.
Rear mounting bracket
Front view
Profile mounting specifications
Drawer back preparation
Formula for calculating outside drawer width
For drawer side thickness 16 (5/8") 15 (19/32") 14 (9/16") 13 (1/2") 12 (15/32")
Deduct from inside cabinet width 10 (3/8") 12 (15/32") 14 (9/16") 16 (5/8") 18 (23/32")
Example: For 21" inside cabinet width and a 5/8" thick drawer, 21" minus 3/8" = 20-5/8" drawer width
Extension Full
Max. drawer material 16 (5/8")
Dynamic capacity 75 lb.
Static capacity 100 lb.