TAPPING CHUCKS & COLLETS - sowatool.com

www.SowaTool.com1-800-265-8221

TAPPING CHUCKS& COLLETSCAT Taper Tension/Compression Tap Holders 86CAT Taper Rigid Tap Holders 86BT Taper Tension/Compression Tap Holders 87BT Taper Rigid Tap Holders 87HSK Tension/Compression & Rigid Tap Holders 88NMTB Taper Tension/Compression Tap Holders 89Weldon Shank Tension/Compression & Rigid Tap Holders 89Straight Shank Tension/Compression Tap Holders 90Straight Shank T/C & Rigid Tapping Chuck 90Morse Taper Tension/Compression Tap Holders 91Torque Control Tap Collets & Sets 91Positive Drive Tap Collets, Reducers & Sets 92Synchrolize Rigid Tapping System 93-94Reverse Tapping Heads & Parts 95Rubber Flex Collets 95

www.sowatool.com

86

CAT Taper Rigid Tap Holders

TAPPING CHUCKS

CAT Taper Tension/Compression Tap Holders

pg 91-92

Collets

Tap TapRange Range L D T/C

Taper Hand Pipe System (in.) (in.) (in.) Code No. Price $CAT40CT40 #0-9/16 1/8 #1 2.93 1.43 0.29/0.29 531-543 279.90 CT40 #0-9/16 1/8 #1 4.00 1.43 0.29/0.29 531-540 279.90 CT40 #0-9/16 1/8 #1 4.47 1.25 0.79/0.39 531-542 279.90 CT40 5/16-7/8 1/4-1/2 #2 4.50 2.09 0.49/0.49 531-544 317.20 CT40 5/16-7/8 1/4-1/2 #2 6.66 2.00 0.85/0.49 531-546 353.00 CT40 13/16-1-3/8 3/4-1 #3 5.75 3.07 0.79/0.79 531-549 592.00 CT40 13/16-1-3/8 3/4-1 #3 8.00 3.07 0.79/0.79 531-548 658.00 CT40 13/16-1-3/8 3/4-1 #3 9.19 2.87 0.98/0.59 531-550 692.70 CAT50CT50 #0-9/16 1/8 #1 4.00 1.43 0.29/0.29 531-552 374.40 CT50 #0-9/16 1/8 #1 5.02 1.25 0.79/0.39 531-554 374.40 CT50 5/16-7/8 1/4-1/2 #2 4.50 2.09 0.49/0.49 531-556 413.10 CT50 5/16-7/8 1/4-1/2 #2 5.66 2.00 0.85/0.49 531-558 413.10 CT50 13/16-1-3/8 3/4-1 #3 6.25 3.07 0.79/0.79 531-560 625.50 CT50 13/16-1-3/8 3/4-1 #3 7.72 2.87 0.98/0.59 531-562 625.50

• Quick-change - push back on the holdersleeve and the adapter with tool is removable

• Press on the end of the adapter noseand the tool is removable - all in a few seconds.

• Smooth stroke - even under full torqueload, the tension-compression stroke isfull and free.

• Interchangeability - our adapters andholders are interchangeable with Universal-Bilz quick change holders and adapters

Pull Stud

pg 91-92

Collets

Tap TapRange Range L D

Taper Hand Pipe System (in.) (in.) Code No. Price $CAT40CT40 #0-9/16 1/8 #1 3.02 1.25 531-564 192.60 CT40 5/16-7/8 1/4-1/2 #2 3.66 2.00 531-566 216.90 CT40 13/16-1-3/8 3/4-1 #3 4.72 2.87 531-568 242.10 CAT50CT50 #0-9/16 1/8 #1 3.02 1.25 531-570 265.50 CT50 5/16-7/8 1/4-1/2 #2 3.91 2.00 531-572 285.30 CT50 13/16-1-3/8 3/4-1 #3 4.98 2.87 531-574 338.40




Pull Stud

1-800-265-8221 www.SowaTool.com

Tap/Drill

Chucks

pg 135

pg 135

87

BT Taper Tension/Compression Tap Holders

BT Taper Rigid Tap Holders

TAPPING CHUCKS

pg 91-92

Collets

T C

D

L


Taper Hand Pipe System (in.) (in.) (in.) Code No. Price $BT30BT30 #0-9/16 1/8 #1 2.40 1.43 0.29/0.29 532-261 305.10 BT30 #0-9/16 1/8 #1 4.25 1.43 0.29/0.29 532-260 305.10 BT30 #0-9/16 1/8 #1 4.92 1.25 0.79/0.39 532-262 305.10 BT40BT40 #0-9/16 1/8 #1 2.62 1.43 0.29/0.29 532-267 307.90 BT40 #0-9/16 1/8 #1 3.80 1.43 0.29/0.29 532-264 307.90 BT40 #0-9/16 1/8 #1 4.33 1.25 0.79/0.39 532-266 307.90 BT40 5/16-7/8 1/4-1/2 #2 4.50 2.09 0.49/0.49 532-268 349.00 BT40 5/16-7/8 1/4-1/2 #2 6.34 2.00 0.85/0.49 532-270 388.30 BT40 13/16-1-3/8 3/4-1 #3 7.50 3.07 0.79/0.79 532-272 723.80 BT40 13/16-1-3/8 3/4-1 #3 9.00 2.87 0.98/0.59 532-274 762.00 BT50BT50 #0-9/16 1/8 #1 4.33 1.25 0.79/0.39 532-275 407.70 BT50 5/16-7/8 1/4-1/2 #2 6.34 2.00 0.85/0.49 532-277 467.10 BT50 13/16-1-3/8 3/4-1 #3 7.50 3.07 0.79/0.79 532-279 906.70



• Smooth stroke - even under full torqueload, the tension-compression stroke is full and free.


Pull Stud

pg 91-92

Collets


Taper Hand Pipe System (in.) (in.) Code No. Price $BT30BT30 #0-9/16 1/8 #1 2.44 1.25 532-276 242.10 BT40BT40 #0-9/16 1/8 #1 3.02 1.25 532-278 211.90 BT40 5/16-7/8 1/4-1/2 #2 3.66 2.00 532-280 238.60 BT40 13/16-1-3/8 3/4-1 #3 4.73 2.87 532-282 266.40 BT50BT50 #0-9/16 1/8 #1 3.02 1.25 532-281 257.40 BT50 5/16-7/8 1/4-1/2 #2 3.66 2.00 532-283 467.10 BT50 13/16-1-3/8 3/4-1 #3 4.73 2.87 532-284 330.50




Pull Stud


Tap/DrillChucks

pg 135

pg 135

88

HSK Rigid Tap Holders

TAPPING CHUCKS

HSK Tension/Compression Tap Holders

pg 91-92

Collets


Taper Hand Pipe System (in.) (in.) (in.) Code No. Price $HSK63HSK63 #0-9/16 1/8 #1 5.30 1.43 0.29/0.29 536-196 706.20 HSK63 5/16-7/8 1/4-1/2 #2 6.10 2.09 0.49/0.49 536-198 786.40 HSK100HSK100 #0-9/16 1/8 #1 5.30 1.43 0.29/0.29 536-202 1,043.20 HSK100 5/16-7/8 1/4-1/2 #2 6.30 2.09 0.49/0.49 536-204 1,123.50



• Smooth stroke - even under full torqueload, the tension-compression stroke isfull and free.


pg 91-92

Collets


Taper Hand Pipe System (in.) (in.) Code No. Price $HSK63HSK63 #0-9/16 1/8 #1 3.34 1.26 536-184 457.50 HSK63 5/16-7/8 1/4-1/2 #2 4.00 1.97 536-186 481.50 HSK63 13/16-1-3/8 1/2-1 #3 5.00 2.83 536-188 564.70 HSK100HSK100 #0-9/16 1/8 #1 3.54 1.43 536-190 658.10 HSK100 5/16-7/8 1/4-1/2 #2 3.74 2.09 536-192 818.50 HSK100 13/16-1-3/8 3/4-1 #3 5.00 3.07 536-194 1,093.40



• Interchangeability - our adapters andholders are interchangeable with Universal-Bilz quick change holders an adapters


Tap/Drill

Chucks

89

NMTB Taper Tension/Compression Tap Holders

Weldon Shank Tension/Compression Tap Holders

Weldon Shank Rigid Tap Holders

TAPPING CHUCKS

pg 91-92

Collets


Taper Hand Pipe System (in.) (in.) (in.) Code No. Price $NMTB40NMTB40 #0-9/16 1/8 #1 3.90 1.25 0.79/0.39 534-500 282.30 NMTB50NMTB50 13/16-1-3/8 3/4-1 #3 7.73 2.87 0.98/0.59 534-508 • 641.90

pg 91-92

Collets

Tap Tap ShankRange Range Dia.Hand Pipe System D D1 L1 L2 T/C Code No. Price $#0-9/16 1/8 #1 1 1.25 2.28 4.13 0.79/0.39 534-520 299.10 #0-9/16 1/8 #1 1 1.43 2.28 1.53 0.79/0.39 534-522 299.10 #0-9/16 1/8 #1 1-1/2 1.25 2.69 4.13 0.79/0.39 534-532 302.50 5/16-7/8 1/4-1/2 #2 1-1/4 2.00 2.28 5.55 0.85/0.49 534-530 350.00 5/16-7/8 1/4-1/2 #2 1-1/2 2.00 2.69 5.55 0.85/0.49 534-534 350.00

• Precision ground surfaces• Compact length• Provide additional mating flexibility• Provides axial float• Adjustable entry force

pg 91-92

Collets

• Precision ground surfaces• Compact length• Provide additional mating flexibility• Provides axial float• Adjustable entry force

Tap Tap ShankRange Range Dia.Hand Pipe System D D1 L1 L2 Code No. Price $

#0-9/16 1/8 #1 1 1.26 2.28 1.46 534-540 121.50 5/16-7/8 1/4-1/2 #2 1 1.97 2.28 2.12 534-542 143.40 13/16-1-3/8 3/4-1 #3 1-1/2 2.83 2.69 3.27 534-544 339.40


Tap/DrillChucks

• Available only while quantities last

90

Straight Shank Tension/Compression Tapping Chucks

Straight Shank Rigid Tapping Chucks

TAPPING CHUCKS

Straight Shank Tension/Compression Tap Holders

pg 91-92

Collets

pg 91-92

Collets

Tap Tap ShankRange Range Dia.Hand Pipe System D D1 L1 L2 T/C Code No. Price $

#0-9/16 1/8 #1 1 1.25 3.50 4.13 0.79/0.39 534-510 269.60 #0-9/16 1/8 #1 1-1/4 1.25 4.00 4.13 0.79/0.39 534-514 269.60 5/16-7/8 1/4-1/2 #2 1 2.00 3.50 5.55 0.85/0.49 534-512 305.70

• Straight shank tooling may be used to extend tooling reach for extended length operations• This option is less costly than extended length integral shank tooling• They may be used with any size machining center or lathe• When loaded into larger holders, their reduced O.D. permits tapping applications within largeholes or whenever tight clearances are encountered

• Precision ground surfaces• Compact length• Provides axial float• Plastic collar to protect chuck from coolant• Roller cage construction• Adjustable entry force

Shank Tap Tension & CompressionDescription System D1 d D l L Capacity T C Code No. Price $1” shank #1 1.00 .748 1.50 1.76 1.95 #0 - 9/16 .35 .35 339-100 499.00 1” shank #2 1.00 1.220 2.17 2.52 2.00 5/16 - 7/8 .59 .59 339-105 616.70

1-1/2” shank #2 1.50 1.220 2.17 2.52 3.50 5/16 - 7/8 .59 .59 339-110 1,069.30 1-1/2” shank #3 1.50 1.890 3.09 3.85 3.50 13/16 - 1-3/8 .94 .94 339-115 1,229.10

LI

dD D1

• Precision ground surfaces• Compact length• No float for synchronous tapping• Coolant through spindle capability

Shank TapDescription System D1 d D l L Capacity Code No. Price $1” shank #1 1.00 .748 1.30 1.60 1.95 #0 - 9/16 339-120 256.70 1” shank #2 1.00 1.220 2.00 2.50 2.00 5/16 - 7/8 339-125 328.00

1-1/2” shank #3 1.50 1.890 2.84 3.44 3.50 13/16 - 1-3/8 339-130 790.60

LI

dD D1


Tap/Drill

Chucks

91

Morse Taper Tension/Compression Tap Holders

Torque Control Tap Collets & Sets

TAPPING CHUCKS

Tap TapMorse Range Range D L T/CTaper Hand Pipe System (in.) (in.) (in.) Code No. Price $2 #0-9/16 1/8 #1 1.25 5.725 0.79/0.39 534-546 • 213.70 3 #0-9/16 1/8 #1 1.25 4.750 0.79/0.39 534-550 230.00 3 5/16-7/8 1/4-1/2 #2 2.00 5.870 0.85/0.49 534-552 235.00 4 #0-9/16 1/8 #1 1.25 4.72 0.79/0.39 534-554 220.20 4 5/16-7/8 1/4-1/2 #2 2.00 5.94 0.85/0.49 534-556 224.70

Tap Tap TapSize System D Shank Square Code No. Price $#0-#6 1 .748 0.141 0.110 337-260 87.30 #8 1 .748 0.168 0.131 337-261 87.30 #10 1 .748 0.194 0.152 337-262 87.30 #12 1 .748 0.220 0.165 337-263 87.30 1/4 1 .748 0.255 0.191 337-264 87.30 5/16 1 .748 0.318 0.238 337-265 87.30 3/8 1 .748 0.381 0.286 337-266 87.30 7/16 1 .748 0.323 0.110 337-267 87.30 1/2 1 .748 0.367 0.110 337-268 87.30 9/16 1 .748 0.429 0.332 337-269 87.30

NPT 1/8P 1 .748 0.313 0.234 337-270 87.30 5/16 2 1.220 0.318 0.238 337-275 111.60 3/8 2 1.220 0.381 0.286 337-276 111.60 7/16 2 1.220 0.323 0.242 337-277 111.60 1/2 2 1.220 0.367 0.275 337-278 111.60 9/16 2 1.220 0.429 0.322 337-279 111.60 5/8 2 1.220 0.480 0.360 337-280 111.60 11/16 2 1.220 0.542 0.406 337-281 111.60 3/4 2 1.220 0.590 0.442 337-282 111.60 13/16 2 1.220 0.652 0.489 337-283 111.60 7/8 2 1.220 0.697 0.523 337-284 111.60

NPT1/4P 2 1.220 0.562 0.421 337-285 111.60 3/8P 2 1.220 0.700 0.531 337-286 111.60 1/2P 2 1.220 0.687 0.515 337-287 111.60

SetsType #1 - 11 pc #0-9/16, 1/8NPT 337-271 889.20 Type #2 - 13 pc 5/16-7/8, 1/4, 3/8, 1/2 NPT 337-288 1,450.00

Tap System #1• Tap Collets are fully compatible with BilzSystem #1. Size Range: #0 - 9/16" hand tapand 1/8" pipe tap

Tap System #2• Tap Collets are fully compatible with BilzSystem #2. Size Range: 5/16"-7/8" hand tap and 1/4"-1/2" pipe tap

D


Tap/DrillChucks


92

TAPPING CHUCKS

Positive Drive Tap Collets, Reducers & Sets

Tap Tap TapSize System D Shank Square Code No. Price $#0-#6 1 .748 0.141 0.110 337-052 33.00 #8 1 .748 0.168 0.131 337-054 33.00 #10 1 .748 0.194 0.152 337-056 33.00 #12 1 .748 0.220 0.165 337-058 33.00 1/4 1 .748 0.255 0.191 337-060 33.00 5/16 1 .748 0.318 0.238 337-062 33.00 3/8 1 .748 0.381 0.286 337-064 33.00 7/16 1 .748 0.323 0.242 337-066 33.00 1/2 1 .748 0.367 0.275 337-068 33.00 9/16 1 .748 0.429 0.322 337-070 33.00

NPT1/8P 1 .748 0.438 0.328 337-072 33.00 5/16 2 1.220 0.318 0.238 337-074 44.70 3/8 2 1.220 0.381 0.286 337-076 44.70 7/16 2 1.220 0.323 0.242 337-078 44.70 1/2 2 1.220 0.367 0.275 337-080 44.70 9/16 2 1.220 0.429 0.322 337-082 44.70 5/8 2 1.220 0.480 0.360 337-084 44.70 11/16 2 1.220 0.542 0.406 337-086 44.70 3/4 2 1.220 0.590 0.442 337-088 44.70 13/16 2 1.220 0.652 0.489 337-090 44.70 7/8 2 1.220 0.697 0.523 337-092 44.70

NPT1/4P 2 1.220 0.562 0.421 337-094 44.70 3/8P 2 1.220 0.700 0.531 337-096 44.70 1/2P 2 1.220 0.687 0.515 337-098 44.70 3/8 3 1.891 0.381 0.286 337-111 119.40 1/2 3 1.891 0.367 0.275 337-089 119.40 9/16 3 1.891 0.429 0.322 337-091 119.40 5/8 3 1.891 0.480 0.360 337-093 119.40 11/16 3 1.891 0.542 0.406 337-095 119.40 3/4 3 1.891 0.590 0.442 337-097 119.40 13/16 3 1.891 0.652 0.489 337-100 119.40 7/8 3 1.891 0.697 0.523 337-102 119.40 15/16 3 1.891 0.760 0.570 337-104 119.40 1 3 1.891 0.800 0.600 337-106 119.40

1-1/8 3 1.891 0.896 0.672 337-108 119.40 1-1/4 3 1.891 1.021 0.766 337-110 119.40 1-3/8 3 1.891 1.108 0.831 337-112 119.40

NPT1/2P 3 1.891 0.687 0.515 337-113 119.40 3/4P 3 1.891 0.906 0.679 337-114 119.40 1 P 3 1.891 1.125 0.843 337-116 119.40

ReducersType #2 - #1 337-118 83.00 Type #3 - #2 337-119 166.00

SetsType #1 - 11 pc #0-9/16, 1/8NPT 337-073 359.90 Type #2 - 13 pc 5/16-7/8, 1/4, 3/8, 1/2 NPT 337-099 579.10 Type #3 - 9 pc 13/16-1-3/8, 3/4, 1” NPT 337-117 1,073.00

Tap System #1• Tap Collets are fully compatible with Bilz System #1. Size Range: #0 - 9/16" hand tapand 1/8" pipe tap

Tap System #2• Tap Collets are fully compatible with BilzSystem #2. Size Range: 5/16" - 7/8" handtap and 1/4" - 1/2" pipe tap

Tap System #3• Tap Collets are fully compatible with Bilz System #3. Size Range: 13/16" - 1-3/8"hand tap and 3/4" - 1" pipe tap

D


Tap/Drill

Chucks

93

TAPPING CHUCKS

Synchrolize Quick Change Tap Adapters

Synchrolize Quick Change Tap Adapters - Ext.

HSK Synchrolize Tap Chucks

BT Taper Synchrolize Tap Chucks

CAT Taper Synchrolize Tap Chucks

Tap Nose GageRange Dia. Length

Taper Hand System (in.) (in.) Code No. Price $40 #0 - 1/2” 1 1.693 2.087 531-610 460.70 40 3/8” - 3/4” 2 2.323 2.874 531-614 572.70 50 #0 - 1/2” 1 1.690 2.402 531-612 492.70 50 3/8” - 3/4” 2 2.323 2.874 531-616 713.40

SYNCHROLIZE TAPPING SYSTEM FOR RIGID TAPPING

• Slim nose design• Up to 200% increase in tap life

• Up to 9” of gage length can be obtained when using the extension system• No need for tap collets due to the opposing set screws in the tap adapters


Taper Hand System (in.) (in.) Code No. Price $40 #0 - 1/2” 1 1.690 2.402 532-310 364.70



Taper Hand System (in.) (in.) Code No. Price $HSK50A #0 - 1/2” 1 1.693 2.756 536-210 460.70 HSK50A 3/8” - 3/4” 2 2.362 3.819 536-218 572.70 HSK63A #0 - 1/2” 1 1.693 2.520 536-212 460.70 HSK63A 3/8” - 3/4” 2 2.362 3.819 536-214 572.70 HSK100A 3/8” - 3/4” 2 2.362 3.583 536-216 860.60


Tap Collet NoseSystem Range Style Length Dia. Code No. Price $

1 #0 - 1/2” ER16 24mm 28mm 338-120 207.80 2 3/8” - 3/4” ER25 28mm 42mm 338-122 243.00

Tap Collet NoseSystem Range Style L Dia. Code No. Price $

1 #0 - 1/2” ER16 55mm 28mm 338-126 553.00 2 3/8” - 3/4” ER25 86mm 42mm 338-128 591.40

• Opposing set screws to secure tap, NO NEED for Tap Collets

• Designed for perfect hole alignment

• Opposing set screws to secure tap, NO NEED for Tap Collets

• Designed for perfect hole alignment

Pull Stud

Pull Stud

• See page 34-35 for ER16 Tap Collets• See page 38-39 for ER25 Tap Collets• See page 42-43 for ER40 Tap Collets

Features:• The Synchrolize tapping chuck is the better solution, it gives you the possibility to work with axial compensation• Tap capacity: M3-M12, M6-M20, M14-M33• Triple life of tap in comparison to a traditional tapping system• Quick change of the tap and of the adapter• Suitable for rigid tapping with micro compensation • Uses ER Tap Collets full and free.


Tap/DrillChucks

pg 0

pg 0

94

TAPPING CHUCKS


Tap/Drill

Chucks

System Length Added Code No. Price $1 5mm 338-132 271.80 2 7mm 338-134 303.70

System Code No. Price $1 338-156 134.30 2 338-158 147.10

System Length Code No. Price $

1 25mm 338-144 73.60 1 50mm 338-146 86.40 2 50mm 338-148 111.90 2 100mm 338-150 127.90

Tap ColletSystem Range Style Length Code No. Price $

1 #0 - 1/2” ER16 50mm 338-138 281.30 2 3/8” - 3/4” ER25 79mm 338-140 287.70

Up to 9” of gage length

SYNCHROLIZE EXTENSION SYSTEM

• See page 34-35 for ER16 Tap Collets• See page 38-39 for ER25 Tap Collets• See page 42-43 for ER40 Tap Collets

Synchrolize Tap Adapter Bodies Synchrolize Extensions

Synchrolize Terminals

Synchrolize Assembly Supports

95

TAPPING HEADS


Tap/DrillChucks

Rubber Flex Collets

Shanks For YSN20 Tapping Head

Clamp, Bolt And Nut Assemblies

Collet Nuts

Lock bolt for torqueadjust ring

Pressure for torque

Cushion for reverse

Block for stop bar

Clamp bolt and nut

Ballbearing

Rubber collet

Thrust bearing

Reversing clutch whichflats axiallyand absorbs

reversing shock

Description Code No. Price $Morse Taper 3-M20 354-062 40.20 Morse Taper 4-M20 354-064 40.20

R8-M20 354-066 56.30

Model Description Code No. Price $YSN7 #21,22 & 44 Screw Pair 354-085 3.20 YSN12 #21,22 & 44 Clamp, Bolt & Nut 354-075 26.50 YSN20 #21,22 & 44 Clamp, Bolt & Nut 354-080 24.80

Model Description Code No. Price $YSN7 #23, 24 & 45 Collet Nut 354-084 24.90 YSN12 #23, 24 & 45 Collet Nut 354-074 26.50 YSN20 #23, 24 & 45 Collet Nut 354-079 27.30

ApproximateDimensions (in.)

Capacity Large Dia. x Small Dia. x OAL Code No. Price $#0 - 10 .590 x .350 x .440 354-032 39.40 #10 - 1/4 .590 x .350 x .440 354-034 39.40 #8 - 1/4 .818 x .508 x .522 354-036 39.40 1/4 - 1/2 .818 x .508 x .522 354-038 39.40 5/16 - 5/8 1.038 x .665 x .610 354-042 39.40 9/16 - 3/4 1.038 x .665 x .610 354-044 39.40

Guaranteed Depth Control Within ±0.004"Features:• Chatter-free clutch has positive engagement which allows for a smoother, more accurate tapping operation and more rapid reversal• Guaranteed Depth Control to ± 0.004"• Radial Float is SELF-CENTERING to compensate for hole center misalignment to 0.005"• Unique Double Spring Mechanism produces Automatic Feed and Cushion Drive. There are two springs for the feed and two springs for the reversal. Each set gives you double smoothness for ULTRA accurate tapping applications (not possible with this type of tapping head in the past)

• Pre-set Torque Control permits easy operation of tap brake torque control• FOR DEPTH CONTROL:Tapping Depth 2.00"Clockwise Expansion (B) -0.14"Hold Machine spindle travel 1.86"

Set your machine travel to feed up to 1.86", then stop your machine travel, the tap holding spindle will continue to feed out (self-feed) up to 0.14" (clockwise expansionB), the drive clutch will go into the neutral zone and stop automatically. We guarantee this Depth Control within ± 0.004" (0.1 mm).• For NC machine, set torque as high as possible within the safe limits of the tap. NC machine Cutting Feed equals (tap pitch x spindle rpm). Reverse Feed equals2 x (tap pitch x spindle rpm)

Tapping Standard Rec. ClockwiseMount Cap. Collet Max. Gear Comp. ExpansionJT No. Steel Code No. Speed Ratio (A) (B) Code No. Price $YSN7

354-032J-6 #0 - 1/4 (#0 - 10) 1,500rpm 1:1.6 0.197" 0.14" 354-002 472.50

M2 - M7 354-034(#10 - 1/4)

YSN12354-036

#8 - 1/2 (#8 - 1/4)J-6 M4 - M12 354-038 1,000rpm 1:1.75 0.197" 0.16" 354-012 575.30

1/8 NPT (1/4 - 1/2)YSN20

354-0425/16 - 3/4 (5/16 - 5/8)

M20 M8 - M20 354-044 600rpm 1:1.7 0.236" 0.24" 354-022 669.90 1/8, 1/4 NPT(9/16 - 3/4)

Reverse Tapping Heads

96 1-800-265-8221 www.SowaTool.com

Tap/Drill

Chucks

Promo # 500-739 Code No. Description531-120 1 pc. CAT50 1/2-4.00" End Mill Holder531-130 1 pc. CAT50 5/8-4.00" End Mill Holder531-140 1 pc. CAT50 3/4-4.00" End Mill Holder531-154 1 pc. CAT50 1"-4.00" End Mill Holder531-162 1 pc. CAT50 1-1/4-4.00" End Mill Holder531-224 1 pc. CAT50 1-1/4-1.75” Shell Mill Holder531-454 2 pcs. CAT50 ER32-4.00" Collet Chuck

CAT50 PACKAGE Total value $ 1 ,514.80

1/16-1/2 x 64ths HSS TiAlN Tip 118º split point

FREE HSS TiAlN Tip Drill Set With Each Package Purchased

• CAT40 Taper Tooling Balanced to 30,000 RPM• CAT50 Taper Tooling Balanced to 25,000 RPM• DIN Coolant Option - Standard• All Ground Body• 100% Forged Construction

Promo # 500-738 Code No. Qty. Description531-002 1 pc CAT40-1/4-2.50" End Mill Holder531-014 1 pc. CAT40-3/8-2.50" End Mill Holder531-026 1 pc. CAT40-1/2-2.50" End Mill Holder531-042 1 pc. CAT40-3/4-3.00" End Mill Holder531-056 1 pc. CAT40-1"-4.00" End Mill Holder531-196 1 pc. CAT40-1"-1.75" Shell Mill Holder531-421 2 pcs. CAT40 ER32-2.5" Collet Chuck

CAT40 PACKAGETotal value $ 1,082.90

CALL TODAY FOR A QUOTE

DELUXESTARTER PACKAGES

Integral Keyless Drill Chucks 98-100Replacement Drill Chucks & Wrenches 100Ball/Plain Bearing & Keyless Drill Chucks 101Drill Chuck Keys 101Jacobs Taper Adapters 102-103Morse Taper Adapters 103-104Boring Head Holders 105Tool Setting Stands, Locking Fixtures 106Spindle Taper Wipers 106NC/CNC Trolleys 106Taper Dimensions & Specifications 107-108Build Your Own Tooling Package Forms 109-112

DRILL CHUCKS& TAPERADAPTERS

www.sowatool.com

98

CAT Taper Integral Keyless Drill Chucks BT Taper Integral Keyless Drill Chucks

DRILL CHUCKS

pg 100

Wrench

pg100

• HIGH PRECISION• PREMIUM TOLERANCE• TIN COATED JAWS FOR IMPROVED LIFE

• GS Keyless Drill Chucks designed to achieve thehighest accuracy and rigidity possible

• GS Super Heavy Duty Ball Bearing Drill Chucksare made to the highest tolerances in the market

DRILL CHUCKS

Taper Cap. L L1 D Code No. Price $CAT40CT40 1/4” 2.559” 2.795” 1.3” 531-480 251.00 CT40 1/2” 4.527” 4.992” 1.97” 531-482 265.00 CT40 5/8” 4.724” 5.236” 2.24” 531-483 391.30

CAT50CT50 1/2” 3.54” 3.996” 1.97” 531-484 306.80 CT50 5/8” 3.7” 4.134” 2.24” 531-485 429.30

Pull Stud

pg 100

Wrench

pg 100

Taper Cap. L L1 D Code No. Price $BT30

BT30 1/4” 3.15” 3.38” 1.3” 532-210 251.00 BT30 1/2” 3.55” 4.02” 1.97” 532-212 265.00

BT40BT40 1/4” 2.95” 3.19” 1.3” 532-214 251.00 BT40 1/2” 3.74” 4.18” 1.97” 532-216 265.00

BT50BT50 5/8” 5.12” 5.59” 2.24” 532-219 346.70

These chucks provide exceptionally hightorque - up to three times the grippingstrength of conventional drill chuck / taperholder combinations. The design eliminatesany possibility of chuck / holder misalignment, and it ensures separation safety• High precision, premium tolerance• The jaws feature a TiN coated surface treatment to ensure durability.

pg 135

Pull Stud


Tap/Drill

Chucks

pg 135

ReplacementDrill Chuck


These chucks provide exceptionally hightorque - up to three times the grippingstrength of conventional drill chuck / taperholder combinations. The design eliminatesany possibility of chuck / holder misalignment, and it ensures separation safety• High precision, premium tolerance• The jaws feature a TiN coated surface treatment to ensure durability.

99

NMTB Taper Integral Keyless Drill Chucks

Morse Taper Integral Keyless Drill Chucks

R8 Integral Keyless Drill Chucks

DRILL CHUCKS

pg 100

Wrench

pg 100

Gage GageLength Length Chuck

Taper Cap. (Open) (Closed) Dia. Code No. Price $NMTB40NMTB40 1/4” 2.36” 2.60” 1.3” 534-404 251.00 NMTB40 1/2” 3.75” 4.20” 1.97” 534-406 303.50

NMTB50NMTB50 1/2” 3.35” 3.74” 1.97” 534-408 306.80

These chucks provide exceptionally high torque - up to three times thegripping strength of conventional drill chuck / taper holder combinations.The design eliminates any possibility of chuck / holder misalignment, and itensures separation safety• High precision, premium tolerance• The jaws feature a TiN coated surface treatment to ensure durability.

pg 100

Wrench

pg 100

GrippingDia. Chuck Gage

Shank (mm) Dia. Length Code No. Price $M.T. 4 0-13 51 100 337-426 131.70 M.T. 4 3-16 57 120 337-428 139.40


pg 100

Wrench

pg 100

GrippingDia. Chuck Gage Draw

Shank (mm) Dia. Length Bar Code No. Price $R-8 0-13 51 100 7/16-20 337-430 190.00 R-8 3-16 57 120 7/16-20 337-432 215.30



Tap/DrillChucks




100

DRILL CHUCKS

Straight Shank Integral Keyless Drill Chucks

Replacement Chuck Wrenches

Replacement Drill Chucks


Tap/Drill

Chucks

pg 100

Wrench

pg 100

Capacity D1 L L1 D Code No. Price $1/4” 3/4” 5.87” 2.56” 1.34” 534-410 111.00 1/2” 1-1/4” 6.06” 2.56” 1.97” 534-414 146.50

These chucks provide exceptionally high torque - upto three times the gripping strength of conventionaldrill chuck / taper holder combinations. The designeliminates any possibility of chuck / holder misalignment, and it ensures separation safety• High precision, premium tolerance• The jaws feature a TiN coated surface treatment to ensure durability.

Description Code No. Price $1/4” chuck 534-422 109.20

1/2” chuck for BT 40 534-424 121.30 1/2” chuck for Cat 40 / NMTB 40 534-425 121.30

5/8” chuck for Cat 40 534-427 152.00

Description Code No. Price $Fits 1/4” chucks 534-418 4.80 Fits 1/2” chucks 534-420 4.80 Fits 5/8” chucks 534-431 6.60


101

Super Heavy Duty Ball Bearing Drill Chucks Drill Chuck Keys

DRILL CHUCKS

Plain Bearing Drill Chucks

Super Precision Keyless Drill Chucks


Tap/DrillChucks

GS Ball Bearing Chucks are specially designed for stationary drilling, turning, milling, and woodworkingmachines.• Sleeve design eliminates the possibility of tooth breakage

• Hardened jaws and body help to avoid wear and lengthen the life of the chuck

• Each chuck supplied with a key

Chuck CapacityModel (in.) Mount Code No. Price $13BXH 1/64-1/2 JT6 536-500 84.50 16BXH 1/64-5/8 JT3 536-502 105.70 19BXH 1/64-3/4 JT4 536-504 137.30

Chuck CapacityModel (in.) Mount Code No. Price $ 6GH 1/64-1/4 JT1 536-506 29.40 10GH 1/64-3/8 JT2 536-512 30.50 13GH 1/64-1/2 JT33 536-514 34.40 13GH 1/64-1/2 JT6 536-516 34.40 13GH 1/64-1/2 1/2-20 536-518 34.40 16GH 1/64-5/8 JT3 536-520 40.20 19GH 1/8-3/4 JT4 536-522 79.30

These chucks provide exceptionally high torque - up to three times the grippingstrength of conventional drill chuck / taper holder combinations. The design eliminatesany possibility of chuck / holder misalignment, and it ensures separation safety• High precision, premium tolerance• The jaws feature a TiN coated surface treatment to ensure durability.

Chuck CapacityModel (in.) Mount Code No. Price $6XH 1/64-1/4 JT1 536-524 82.80 6XH 1/64-1/4 3/8 -24 536-526 65.90 10XH 1/64-3/8 JT2 536-528 97.10 10XH 1/64-3/8 JT33 536-530 97.10 13XH 1/64-1/2 JT6 536-534 111.50 13XH 1/64-1/2 JT33 536-536 161.30 13XH 1/64-1/2 1/2 -20 536-538 74.40 16XH 1/8-5/8 JT6 536-540 125.00 16XH 1/8-5/8 JT33 536-542 125.00

ChuckModel Key No. Code No. Price $6GH 1/4 P1 536-544 2.30 10GH 3/8 P2 536-546 2.30

13GH 1/2 JT33 P6 536-548 3.30 13GH 1/2 JT6 P6 536-548 3.30 16GH 5/8 P7 536-550 3.30 19GH 3/4 P7 536-550 3.30 13BXH P6 536-548 3.30 16BXH P7 536-550 3.30 19BXH P7 536-550 3.30

GS Ball Bearing Chucks are specially designed for HEAVYDUTY drilling applications on production drilling machines,jig borers, milling machines, lathes and radials. The idealchoice for those jobs that require close tolerance drilling.The ball thrust bearing reduces friction in the chuck'sclosing mechanism, so the operator can apply more gripping power on the twist drill shank.• High precision, premium tolerance• The jaws feature a TiN coated surface treatment to ensure durability.

102

ADAPTERS

CAT Taper Jacobs Taper Adapters

BT Taper Jacobs Taper Adapters

Taper JT Size L D Code No. Price $CAT40

CT40 JT#2 1.61” .560” 531-490 102.60 CT40 JT#3 1.58” .812” 531-492 102.60 CT40 JT#4 1.49” 1.13” 531-494 102.60 CT40 JT#6 1.61” .677” 531-496 102.60 CT40 JT#33 1.61” .625” 531-498 102.60

CAT50CT50 JT#2 1.61” .560” 531-500 135.40 CT50 JT#3 1.58” .812” 531-502 135.40 CT50 JT#4 1.49” 1.13” 531-504 135.40 CT50 JT#6 1.61” .677” 531-506 135.40 CT50 JT#33 1.61” .625” 531-508 135.40

Pull Stud

Taper JT Size L D Code No. Price $BT30

BT30 JT#2 1.02” .560” 532-220 71.10 BT30 JT#3 0.98” .812” 532-222 • 79.20 BT30 JT#6 1.02” .677” 532-224 71.10 BT30 JT#33 1.02” .625” 532-226 71.10

BT40BT40 JT#2 1.61” .560” 532-230 112.90 BT40 JT#3 1.57” .812” 532-232 112.90 BT40 JT#6 1.61” .677” 532-234 112.90 BT40 JT#33 1.61” .625” 532-236 112.90

BT50BT50 JT#6 1.77” .677” 532-237 127.80

Pull Stud


Tap/Drill

Chucks

pg 135

pg 135

• Shank traverse ground to obtain optimum accuracy• Meets or exceeds ANSI specifications• .0002” or better TIR ensures the best possible cutting tool life


103

NMTB Taper Jacobs Taper Adapters

R8 Jacobs Taper Adapters

CAT Morse Taper Adapters

ADAPTERS

Taper JT Size L D Code No. Price $NMTB40

NMTB40 JT#1 0.69” .385” 534-440 • 96.20 NMTB40 JT#2 0.65” .560” 534-442 96.20 NMTB40 JT#3 0.61” .812” 534-444 96.20 NMTB40 JT#6 0.65” .677” 534-446 96.20 NMTB40 JT#33 0.65” .625” 534-448 96.20

NMTB50NMTB50 JT#3 1.30” .812” 534-452 134.30 NMTB50 JT#4 1.22” 1.13” 534-454 • 134.30 NMTB50 JT#6 1.34” .677” 534-456 • 134.30 NMTB50 JT#33 1.34” .625” 534-458 • 134.30

Taper JT Size L D Code No. Price $R8 JT#2 0.13” .560” 534-462 66.00 R8 JT#3 0.13” .812” 534-464 66.00 R8 JT#6 0.13” .677” 534-466 66.00 R8 JT#33 0.13” .625” 534-468 66.00

• Shank traverse ground to obtain optimumaccuracy• Meets or exceeds ANSI specifications• .0002” or better TIR ensures the best possible cutting tool life

Pull Stud

Taper Size L D D1 Code No. Price $CAT40CT40 MT#1 1.75” .475” 1.00” 531-510 107.80 CT40 MT#2 2.36” .700” 1.25” 531-512 107.80 CT40 MT#3 3.00” .938” 1.57” 531-514 107.80 CT40 MT#4 3.54” 1.23” 1.97” 531-516 107.80

CAT50CT50 MT#2 1.75” .700” 1.25” 531-518 146.80 CT50 MT#3 1.75” .938” 1.57” 531-520 158.60 CT50 MT#4 3.00” 1.23” 1.97” 531-522 158.60 CT50 MT#5 4.13” 1.75” 2.75” 531-524 178.50


Tap/DrillChucks

pg 135


104

ADAPTERS

BT Morse Taper Adapters

NMTB Morse Taper Adapters

R8 Morse Taper Adapters


Tap/Drill

Chucks

• Shank traverse ground to obtain optimum accuracy• Meets or exceeds ANSI specifications• .0002” or better TIR ensures the bestpossible cutting tool life

Pull Stud

Taper Size L D D1 Code No. Price $BT30

BT30 MT#1 1.75” .475” 1.00” 532-238 86.40 BT30 MT#2 2.36” .700” 1.25” 532-240 86.40

BT40BT40 MT#1 1.75” .475” 1.00” 532-242 118.60 BT40 MT#2 2.36” .700” 1.25” 532-244 118.60 BT40 MT#3 3.00” .938” 1.57” 532-246 118.60 BT40 MT#4 3.54” 1.23” 1.97” 532-248 118.60

BT50BT50 MT#2 1.75” .700” 1.25” 532-241 153.00 BT50 MT#3 1.75” .928” 1.57” 532-243 153.00 BT50 MT#4 3.00” 1.231” 1.89” 532-245 172.80 BT50 MT#5 4.00” 1.748” 2.48” 532-247 175.50

Taper Size L D D1 Code No. Price $NMTB40

NMTB40 MT#2 1.75” 0.70” 1.25” 534-472 103.00 NMTB40 MT#3 2.25” 0.94” 1.57” 534-474 103.00 NMTB40 MT#4 3.00” 1.23” 1.97” 534-476 103.00

NMTB50NMTB50 MT#2 1.88” 0.70” 1.25” 534-478 151.60 NMTB50 MT#3 2.38” 0.94” 1.57” 534-480 156.10 NMTB50 MT#4 3.25” 1.23” 1.97” 534-482 160.60 NMTB50 MT#5 4.63” 1.75” 2.75” 534-484 175.70

Taper Size L D D1 Code No. Price $R8 MT#1 0.44” 0.48” 1.00” 534-486 68.00 R8 MT#2 0.44” 0.70” 1.25” 534-488 68.00 R8 MT#3 2.56” 0.94” 1.57” 534-490 74.70

pg 135

105

CAT Taper Boring Head Holders

BT Taper Boring Head Holders

NMTB Taper Boring Head Holders

ADAPTERS


Tap/DrillChucks

Taper Thread L L1 D Code No Price $CAT40

CT40 7/8” - 20 1.75” 0.44” 1.75” 531-526 85.60 CT40 1-1/2” - 18 1.75” 0.50” 2.96” 531-528 87.30

CAT50CT50 1-1/2” - 18 1.75” 0.50” 2.96” 531-532 122.80

Pull Stud

Taper Thread L L1 D Code No. Price $BT30

BT30 1-1/2”-18 1.75” 0.50” 2.96” 532-252 86.50 BT40

BT40 7/8”-20 1.75” 0.44” 1.75” 532-254 • 86.60 BT40 1-1/2”-18 1.75” 0.50” 2.96” 532-256 • 88.80

Taper Thread L L1 D Code No. Price $NMTB40

NMTB40 7/8”-20 1.75” 0.44” 1.75” 534-492 83.60 NMTB40 1-1/2”-18 1.75” 0.50” 2.96” 534-494 • 84.50

NMTB50NMTB50 7/8”-20 1.75” 0.44” 1.75” 534-496 122.80 NMTB50 1-1/2”-18 1.75” 0.50” 2.94” 534-498 123.10

Pull Stud

L

pg 135

pg 135




Spindle Taper Wipers

TotalModel No. Taper Length Code No. Price $VTW-30 #30 168mm 326-210 25.40 VTW-40 #40 159mm 326-215 25.40 VTW-50 #50 265mm 326-220 36.90 VTW-50H HSK50 159mm 326-225 116.20 VTW-63H HSK63 167mm 326-230 116.20

Features:• For easily and quickly cleaning spindle holes.• Plastic body, the taper wiper is made of special cotton material therefore not damaging the spindle.

• The BT & DIN tapers are the same.

Tap/Drill

Chucks

Tool Holder Locking Devices HSK Tool Holder Locking Fixture

Description Code No. Price $30 Taper 335-270 252.30 40 Taper 335-275 252.30

50 Taper (Only CAT50 & NMTB50) 335-280 252.30

• For Cat, BT & NMTB Tapers

Vertical Horizontal Code No. Price $TL40 Taper 40 Taper x 2 (only BT & NMTB) 335-250 456.10 TL50 Taper 50 Taper x 2 (only BT & NMTB) 335-260 456.10 TL50 Taper 50 Taper x 1 / 40 Taper x 1 335-240 456.10 TL40 Taper 50 Taper x 1 / 40 Taper x 1 335-230 456.10

Description Code No. Pice $HSK63 335-225 545.40

• Weight: 4.5 kg

Model Code No. Price $TL-30 335-200 245.20 TL-35 335-205 245.20 TL-40 335-210 245.20 TL-50 335-220 245.20

Inserts Replacement Taper Per Plastic Inserts Tool Cart

Desc. Type Tray Code No. Price $ Code No. Price $Trolley, 40 7 326-986 5.00 326-985 799.60

4 trays hold 28 insertsTrolley, 50 5 326-996 4.80 326-995 799.60 4 trays hold 20 inserts

NC/CNC Trolleys

Complete Tool Trolley with 4 Tool Trays and Inserts.• Trays bolt in• (W)1002mm x (D)650mm x (H)830mm• Weight: 51kgs

CNC SUPPLIES

Deluxe Tool Setting StandsQuick and easy way to change cutters and pull studs. Protects the taper ofholder with protective insert. Available in all tapers.• Select between horizontal or vertical tool holding; quick and simple operation

• For Cat, BT & NMTB Tapers

Simple Tool Setting StandsQuick and easy way to change cutters and pull studs. Protects the taper ofholder with protective insert. Available in all tapers.• This is an excellent helping tool for simple, rapid and safe tool holding• For Cat, BT & NMTB Tapers

107

TECH DATA


Tap/DrillChucks

CAT Taper Dimensions

BT Taper Dimensions

HSK Taper Dimensions

ShankNo. D1 D2 M d1 d2 d3 L1 L2 L3 G

CAT40 63.5 56.36 44.45 44.45 16.28 21.84 68.25 28.45 4.78 5/8-11CAT45 82.55 75.41 57.15 57.15 19.46 27.69 82.55 38.1 4.78 3/4-10CAT50 98.43 91.29 69.85 69.85 26.19 35.05 101.6 44.45 6.35 1-8

BTNo. D1 D2 t1 t2 t3 t4 d1 d3 L M b1 t5 d535 53 43 22 10 14.6 2 38.1 13 56.5 M12x1.75 16.1 19.6 21.6240 63 52 25 10 16.6 2 44.45 17 65.4 M16x2 16.1 22.6 25.345 85 73 30 12 21.2 3 57.15 21 82.8 M20x25 9.3 29.1 33.150 100 85 35 15 23.2 3 69.85 25 101.8 M24x3 25.7 35.4 40.160 155 135 45 20 28.2 3 107.95 31 161.8 M30x3.5 25.7 60.1 60.7

ShankNo. b1 b2 b3 d1 d2 d3 d4 d5 d6 d7 d8 d9 d10 d11 d12 d13 d14 a1 a2

HSK50 10.54 12 14 50 38 36.9 42 43 59.3 7 26 32 29 M16X1 10 6.8 6.8 13.997 7.64863 12.5 16 14 63 48 46.53 53 55 72.3 7 34 40 37 M18X1 12 8 8.4 17.862 9.25100 20 20 14 100 75 72,80 85 92 109.75 7 53 63 58 M24X1.5 16 12 12 27.329 15

ShankNo. f1 f2 f3 f4 b1 b2 L1 L2 L3 L4 L5 L6 L7 L8 L9 L10 L11 L12 r1 r2 r3 r4 r5 r6 r7 r8

HSK50 26 42 18 3.75 2 15.5 25 5 11 7.5 4.5 14.13 10 10 23 3 1 19 1 1.5 2.38 6 0.5 1 2 663 26 42 18 3.75 28.5 20 32 6.3 14.7 10 6 18.13 10 12 24.5 3 1 21 1.2 1.5 3 8 0.6 1.5 3 8100 29 45 20 3.75 44 31.5 50 10 24 15 10 28.56 12.5 16 28 3 1.5 24 2 2 3 12 1 1.5 3 10

108

TECH DATA


Tap/Drill

Chucks

NMTB Taper Dimensions

Morse Taper With Tang

Morse Taper Screw Type

MT TaperNo. Taper Angle(a) D a D1 d1 �1 �2 d2 b c e R r0 1/19.212 1°29'27" 9.045 3 9.201 6.104 56.5 59.5 6 3.9 6.5 10.5 4 11 1/20.047 1°25'43" 12.065 3.5 12.24 8.972 62 65.5 8.7 5.2 8.5 13.5 5 1.22 1/20.020 1°25'50" 17.78 5 18.03 14.034 75 80 13.5 6.3 10 16 6 1.63 1/19.922 1°26;16" 23.825 5 24.076 19.107 94 99 18.5 7.9 13 20 7 24 1/19.254 1°29'15" 31.267 6.5 31.605 25.164 117.5 124 24.5 11.9 16 24 8 2.55 1/19.002 1°30'26" 44.399 6.5 4.741 36.531 149.5 156 35.7 15.9 19 29 10 36 1/19.180 1°29'36" 63.348 8 63.765 52.399 210 218 51 19 27 40 13 47 1/19.231 1°29'22" 83.058 10 83.578 68.186 286 296 66.8 28.6 35 54 19 5

MT TaperNo. Taper Angle(a) D a D1 d1 �1 �2 d1 d2 k t r0 1/19.212 1°29'27" 9.045 3 9.201 6.442 50 53 6 - - 4 0.21 1/20.047 1°25'43" 12.065 3.5 12.23 9.396 53.5 57 9 M6 16 5 0.22 1/20.020 1°25'50" 17.78 5 18.03 14.583 64 69 14 M10 24 5 0.23 1/19.922 1°26'16" 23.825 5 24.076 19.759 81 86 19 M12 28 7 0.64 1/19.254 1°29'15" 31.267 6.5 31.605 25.943 2.5 109 25 M16 32 9 15 1/19.002 1°30'26" 44.399 6.5 4.741 37.584 129.5 136 35.7 M20 40 9 2.56 1/19.180 1°29'36" 63.348 8 63.765 53.859 182 190 51 M24 50 12 47 1/19.231 1°29'22" 83.058 10 83.578 70.058 250 260 65 M33 80 18.5 5

MTNO. D d1 L �1 M �2 �3 a t b30 1-1/4”-31.75 17.40(-0.29/-0.36) 70 20 UNC-1/2” 24 50 1.6 15.9 640 1-3/4”-44.45 25.32(-0.30/-0.387) 95 25 UNC-5/8” 30 60 1.6 15.9 22.550 2-3/4”-69.85 39.60(-0.31/-0.41) 130 25 UNC-1” 45 90 3.2 25.4 3560 4-1/4”-107.95 60.20(-0.34/-0.46) 210 45 UNC1/4” 56 110 3.2 25.4 60

WORKHOLDING SOLUTIONS

BUILD YOUR OWN TOOLING PACKAGEAND SAVE!

• DIN Coolant option - standard• All Ground Body

• 100% Forged Construction• Balanced up to 30,000 rpm

GS Premium Balanced Rotary Tooling

GUARANTEED TO MATCH ALL COMPETITORS PRICES ON EQUIVALENT PRODUCTS


Tap/Drill

Chucks

CAT40 TOOLING PACKAGE QUOTE REQUEST FORMFax back to Toll Free Fax: 1-866-511-7692 Fax: 519-748-9304

CAT40 End Mill Holders CAT40 Shell Mill Holders

ER Collet Sets

GS Modular & Milling Machine Vises

CAT40 ER Collet Chucks

Hole GageTaper Dia. Length Code No. SelectCT40 1/8” 1.35”* 531-069CT40 1/8” 2.50” 531-070CT40 1/8” 4.00” 531-071CT40 3/16” 1.38”* 531-072CT40 3/16” 2.50” 531-073CT40 3/16” 4.00” 531-074CT40 1/4” 1.38”* 531-000CT40 1/4” 2.50” 531-002CT40 1/4” 4.00” 531-004CT40 1/4” 9.00” 531-005CT40 5/16” 1.38”* 531-006CT40 5/16” 2.50” 531-008CT40 5/16” 4.00” 531-010CT40 5/16” 9.00” 531-011CT40 3/8” 1.38”* 531-012CT40 3/8” 2.50” 531-014CT40 3/8” 4.00” 531-016CT40 3/8” 5.00” 531-018CT40 3/8” 9.00” 531-031CT40 7/16” 2.50” 531-020CT40 7/16” 4.00” 531-022CT40 7/16” 9.00” 531-033CT40 1/2” 1.75”* 531-024CT40 1/2” 2.50” 531-026CT40 1/2” 4.00” 531-028CT40 1/2” 5.00” 531-030CT40 1/2” 9.00” 531-035CT40 5/8” 1.75”* 531-032CT40 5/8” 3.00” 531-034CT40 5/8” 4.00” 531-036CT40 5/8” 5.50” 531-038CT40 5/8” 9.00” 531-037CT40 3/4” 1.75”* 531-040CT40 3/4” 3.00” 531-042CT40 3/4” 4.00” 531-044CT40 3/4” 5.50” 531-046CT40 3/4” 9.00” 531-039CT40 7/8” 1.75”* 531-048CT40 7/8” 3.50” 531-050CT40 7/8” 6.00” 531-052CT40 7/8” 9.00” 531-041CT40 1” 2.00”* 531-054CT40 1” 4.00” 531-056CT40 1” 6.00” 531-058CT40 1” 9.00” 531-043CT40 1-1/4” 2.00”* 531-060‡CT40 1-1/4” 4.00” 531-062CT40 1-1/4” 6.00” 531-064CT40 1-1/2” 4.50” 531-066CT40 1-1/2” 6.00” 531-068

* Stubby Length ‡ Not DIN Coolant

* ER Shorty collet chuck

30x

CAT 40PremiumBalanced

RPM

• DIN Coolant option - standard• All Ground Body• 100% Forged Construction

GageTaper Dia. Length Code No. SelectCT40 1/2” 1.75” 531-190CT40 3/4” 1.75” 531-192CT40 3/4” 4.00” 531-194CT40 3/4” 6.00” 531-195CT40 1” 1.75” 531-196CT40 1” 4.00” 531-198CT40 1” 6.00” 531-199CT40 1-1/4” 2.00” 531-200CT40 1-1/4” 4.00” 531-202CT40 1-1/4” 6.00” 531-203CT40 1-1/2” 2.00” 531-204CT40 1-1/2” 4.00” 531-206


• DIN Coolant option - standard• All Ground Body• 100% Forged Construction• Factory Balanced to save spindle life,tool life and increase productivity

• Threaded through holes for a back-upscrew (tool stop) or coolant through whenremoved

• Wrench not included

Collet Collet GageTaper Series Range Length Code No. SelectCT40 ER11 .019-.275” 2.50” 531-400CT40 ER11 .019-.275” 4.00” 531-402CT40 ER11 .019-.275” 6.00” 531-404CT40 ER16 .019-.406” 2.50” 531-406CT40 ER16 .019-.406” 3.50” 531-408CT40 ER16 .019-.406” 4.00” 531-405CT40 ER16 .019-.406” 6.00” 531-410CT40 ER16 .019-.406” 9.00” 531-411CT40 ER20 .039-.511” 2.50” 531-412CT40 ER20 .039-.511” 4.00” 531-414CT40 ER20 .039-.511” 6.00” 531-416CT40 ER20 .039-.511” 9.00” 531-417CT40 ER25 .039-.629” 2.50” 531-418CT40 ER25 .039-.629” 4.00” 531-420CT40 ER25 .039-.629” 6.00” 531-422CT40 ER32 .078-.787” .750” 531-401*CT40 ER32 .078-.787” 2.50” 531-421CT40 ER32 .078-.787” 3.13” 531-424CT40 ER32 .078-.787” 4.00” 531-423CT40 ER32 .078-.787” 5.00” 531-426CT40 ER32 .078-.787” 6.00” 531-425CT40 ER32 .078-.787” 9.00” 531-419CT40 ER40 .118-1.023” 2.50” 531-427CT40 ER40 .118-1.023” 3.13” 531-428CT40 ER40 .118-1.023” 4.00” 531-429CT40 ER40 .118-1.023” 5.00” 531-430CT40 ER40 .118-1.023” 6.00” 531-431

30x


RPM

Collet Description Range Code No. SelectER11 Inch Size 7pc Collet Set 1/16-1/4 x 32nds 337-401ER11 Decimal 13pc Collet Set .019”-.271” 337-379ER16 Inch Size 11pc Collet Set 1/16-3/8 x 32nds 337-403ER16 Decimal 10pc Collet Set .019”-.393” 337-380ER20 Inch Size 15pc Collet Set 1/16-1/2 x 32nds 337-404ER20 Decimal 12pc Collet Set .039”-.510” 337-382ER25 Inch Size 17pc Collet Set 1/8-5/8 x 32nds 337-405ER25 Decimal 15pc Collet Set .039”-.629” 337-383ER32 Inch Size 21pc Collet Set 1/8-3/4 x 32nds 337-407ER32 Decimal 18pc Collet Set .078”-.787” 337-384ER40 Inch Size 29pc Collet Set 1/8-1” x 32nds 337-409ER40 Decimal 23pc Collet Set .118”-1.023” 337-386

* Case may not be as shown

Taper Trays x Desc. Type Inserts Code No. SelectTrolley 40 4 x 7 326-985Trolley 50 4 x 5 326-995

Complete Tool Trolley with 4 Tool Trays and Inserts.• Trays bolt in• (W) 39.45”(D) 25.59”(H) 32.68”

• Weight: 112.20 lbs

Company:

Contact:

Phone:

Fax:

e-mail:

Notes:

Jaw JawModel Width Opening Code No. SelectGS675 6 7.5 327-275MGS890 6 8.9 327-290MGS810 8 10.0 327-300

#3 Modular 6 8 382-015

• Vises are Matched

*Modular Vise

*Milling Machine Vise

NC/CNC Trolley

• Alloy Steel

111www.SowaTool.com1-800-265-8221

Tap/DrillChucks

CAT50 TOOLING PACKAGE QUOTE REQUEST FORMFax back to Toll Free Fax: 1-866-511-7692 Fax: 519-748-9304

CAT50 End Mill Holders CAT50 Shell Mill Holders

CAT50 ER Collet Chucks

ER Collet Sets



• Alloy Steel

Hole GageTaper Dia. Length Code No. SelectCT50 1/4” 1.38”* 531-082CT50 1/4” 2.50” 531-084CT50 1/4” 4.00” 531-086CT50 1/4” 6.00” 531-088CT50 1/4” 8.00” 531-090CT50 5/16” 2.50” 531-092CT50 5/16” 4.00” 531-094CT50 5/16” 6.00” 531-096CT50 3/8” 1.38”* 531-098CT50 3/8” 2.50” 531-100CT50 3/8” 4.00” 531-102CT50 3/8” 6.00” 531-104CT50 3/8” 8.00” 531-106CT50 3/8” 14.00” 531-107CT50 7/16” 2.50” 531-108CT50 7/16” 4.00” 531-110CT50 7/16” 6.00” 531-112CT50 7/16” 8.00” 531-114CT50 7/16” 14.00” 531-113CT50 1/2” 1.75”* 531-116CT50 1/2” 2.63” 531-118CT50 1/2” 4.00” 531-120CT50 1/2” 6.00” 531-122CT50 1/2” 8.00” 531-124CT50 1/2” 14.00” 531-125CT50 9/16 6.00” 531-133CT50 5/8” 1.75”* 531-126CT50 5/8” 3.00” 531-128CT50 5/8” 4.00” 531-130CT50 5/8” 6.00” 531-132CT50 5/8” 8.00” 531-134CT50 5/8” 14.00” 531-131CT50 3/4” 1.75”* 531-136CT50 3/4” 3.00” 531-138CT50 3/4” 4.00” 531-140CT50 3/4” 6.00” 531-142CT50 3/4” 8.00” 531-144CT50 3/4” 14.00” 531-145CT50 7/8” 1.75”* 531-146CT50 7/8” 3.75” 531-148CT50 7/8” 6.00” 531-150CT50 1” 2.00”* 531-152CT50 1” 4.00” 531-154CT50 1” 6.00” 531-156CT50 1” 8.00” 531-158CT50 1” 14.00” 531-159CT50 1-1/4” 2.00”* 531-160CT50 1-1/4” 4.00” 531-162CT50 1-1/4” 6.00” 531-164CT50 1-1/4” 8.00” 531-166CT50 1-1/4” 14.00” 531-167CT50 1-1/2” 2.25”* 531-168CT50 1-1/2” 4.50” 531-170CT50 1-1/2” 7.00” 531-172CT50 1-1/2” 9.00” 531-174CT50 2” 3.63”* 531-176CT50 2” 5.37” 531-178CT50 2” 8.00” 531-180CT50 2” 10.00” 531-182CT50 2-1/2” 6.00” 531-184

25x


RPM


GageTaper Dia. Length Code No. SelectCT50 3/4” 1.75” 531-208CT50 3/4” 4.00” 531-210CT50 3/4” 6.00” 531-212CT50 3/4” 8.00” 531-214CT50 1” 1.75” 531-216CT50 1” 4.00” 531-218CT50 1” 6.00” 531-220CT50 1” 8.00” 531-222CT50 1-1/4” 1.75” 531-224CT50 1-1/4” 4.00” 531-226CT50 1-1/4” 6.00” 531-228CT50 1-1/4” 8.00” 531-230CT50 1-1/2” 2.00” 531-232CT50 1-1/2” 4.00” 531-234CT50 1-1/2” 6.00” 531-236CT50 1-1/2” 8.00” 531-238CT50 2” 2.00” 531-240CT50 2” 4.00” 531-242CT50 2” 6.00” 531-244


• DIN Coolant option - standard• All Ground Body• 100% Forged Construction• Wrench not included

Collet Collet GageTaper Series Range Length Code No. SelectCT50 ER16 .019-.406” 4.12” 531-432CT50 ER16 .019-.406” 6.00” 531-434CT50 ER16 .019-.406” 8.00” 531-436CT50 ER16 .019-.406” 12.00” 531-437CT50 ER20 .039-.511” 2.50” 531-438CT50 ER20 .039-.511” 4.00” 531-440CT50 ER20 .039-.511” 6.00” 531-442CT50 ER20 .039-.511” 8.00” 531-444CT50 ER20 .039-.511” 12.00” 531-445CT50 ER25 .039-.629” 2.50” 531-446CT50 ER25 .039-.629” 4.00” 531-448CT50 ER25 .039-.629” 6.00” 531-450CT50 ER25 .039-.629” 8.00” 531-452CT50 ER32 .078-.787” .750” 531-403*CT50 ER32 .078-.787” 4.00” 531-454CT50 ER32 .078-.787” 6.00” 531-456CT50 ER32 .078-.787” 8.00” 531-458CT50 ER32 .078-.787” 12.00” 531-459CT50 ER40 .118-1.023” 4.00” 531-460CT50 ER40 .118-1.023” 6.00” 531-462CT50 ER40 .118-1.023” 8.00” 531-464CT50 ER40 .118-1.023” 12.00” 531-465

25x


RPM




Company:

Contact:

Phone:

Fax:

e-mail:

Notes:


#3 Modular 6 8 382-015


*Modular Vise


NC/CNC Trolley




Tap/Drill

Chucks

BT40 TOOLING PACKAGE QUOTE REQUEST FORM


30x

BT 40PremiumBalanced

RPM

Hole GageTaper Dia. Length Code No. SelectBT40 1/8” 1.38”* 531-019BT40 1/8” 2.50” 531-021BT40 1/8” 4.00” 531-023BT40 3/16” 1.38”* 531-025BT40 3/16” 2.50” 531-027BT40 3/16” 4.00” 531-029BT40 1/4” 1.38”* 532-018BT40 1/4” 2.50” 532-020BT40 1/4” 4.00” 532-022BT40 5/16” 1.38”* 532-024BT40 5/16” 2.50” 532-026BT40 5/16” 4.00” 532-028BT40 3/8” 1.38”* 532-030BT40 3/8” 2.50” 532-032BT40 3/8” 4.00” 532-034BT40 7/16” 2.50” 532-036BT40 1/2” 1.75”* 532-038BT40 1/2” 2.50” 532-040BT40 1/2” 4.00” 532-042BT40 5/8” 1.75”* 532-044BT40 5/8” 2.50” 532-046BT40 5/8” 4.00” 532-048BT40 3/4” 1.75”* 532-050BT40 3/4” 2.50” 532-052BT40 3/4” 4.00” 532-054BT40 7/8” 3.38” 532-056BT40 7/8” 6.00” 532-058BT40 1” 2.00”* 532-060BT40 1” 3.56” 532-062BT40 1” 6.00” 532-064BT40 1-1/4” 2.00”* 532-066BT40 1-1/4” 3.56” 532-068BT40 1-1/4” 6.00” 532-070BT40 1-1/2” 4.50” 532-072BT40 1-1/2” 6.00” 532-074

GageTaper Dia. Length Code No. SelectBT40 1/2” 1.75” 532-086BT40 3/4” 1.75” 532-088BT40 3/4” 4.00” 532-111BT40 3/4” 6.00” 532-114BT40 1” 1.75” 532-090BT40 1” 4.00” 532-115BT40 1” 6.00” 532-117BT40 1-1/4” 2.00” 532-092BT40 1-1/4” 4.00” 532-119BT40 1-1/4” 6.00” 532-121BT40 1-1/2” 2.00” 532-094


Collet Collet GageTaper Series Range Length Code No. SelectBT40 ER11 .019-.275” 2.50” 532-174BT40 ER11 .019-.275” 4.00” 532-176BT40 ER11 .019-.275” 6.00” 532-178BT40 ER16 .019-.406” 3.50” 532-180BT40 ER16 .019-.406” 5.00” 532-182BT40 ER20 .039-.511” 2.50” 532-184BT40 ER20 .039-.511” 4.00” 532-186BT40 ER20 .039-.511” 6.00” 532-188BT40 ER25 .039-.629” 2.25” 532-190BT40 ER25 .039-.629” 4.00” 532-192BT40 ER25 .039-.629” 6.00” 532-194BT40 ER32 .078-.787” 1.06” 532-191*BT40 ER32 .078-.787” 3.13” 532-196BT40 ER32 .078-.787” 5.00” 532-198BT40 ER40 .118-1.023” 3.13” 532-200BT40 ER40 .118-1.023” 5.00” 532-202


30x

BT 40PremiumBalanced

RPM






Company:

Contact:

Phone:

Fax:

e-mail:

Notes:


#3 Modular 6 8 382-015


*Modular Vise


BT40 End Mill Holders BT40 Shell Mill Holders

BT TAPER ER COLLET CHUCKS

ER Collet Sets


NC/CNC Trolley

• DIN Coolant option - standard• All Ground Body• 100% Forged Construction• Factory Balanced to save spindle life,tool life and increased productivity

• Threaded through holes for a back-upscrew (tool stop) or coolant through whenremoved

• Wrench not included

Fax back to Toll Free Fax: 1-866-511-7692 Fax: 519-748-9304

Documents

TAPPING CHUCKS & COLLETS - sowatool.com