Designed specifically to integrate with the Latronics PV Edge Grid Connect inverters, it allows battery-less grid connection of DC or 3-phase AC wind and water turbines.

Internal RectifierAllows for direct connection to turbine (3 Phase AC or DC Voltage).

Wall Mount DesignAllows flexibility and ease of installation.

Electronic Smart BrakeThe electronic braking system progressively increases the braking until the turbine comes to a complete stop. This will extend bearing life and prevent damage to both the PV Edge and Turbine during extreme conditions.

DC Circuit BreakerDC circuit breaker allows easy disconnection from the turbine.

ReliabilityOver 25 years of experience and continuous adherence to stringent quality standards ensures optimum reliability backed with a full 2 year parts and labour warranty.

VersatileSuitable for use with Wind Generators, Micro Hydro and other Renewable Turbine Sources.

Durable ConstructionLatronics Turbine Controllers are made to the highest quality to provide years of reliable operation.

Corrosion Conscious DesignLatronics Turbine Controllers are built for extreme environments using a recyclable powder coated aluminium casing, a more noble metal than steel.

LED Status IndicatorsA set of LEDs keeps the user informed of its operation at all times.

– Insufficient power to feed grid.

– Sufficient power to feed grid.

– Electronic Smart Braking Active.

Indicators– Green LED Flashing: Indicates there

is power present, but insufficient levels to begin feeding the grid.

– Green LED On: Indicates there is sufficient power to feed the grid.

– Red LED On: Indicates the turbine is over-spinning and the Electronic Smart Braking system is functioning.

Multiple Input TypesThe Latronics Turbine Controllers come standard with a voltage rectifier. This means 3 phase AC or DC Voltage can be fed in to the Turbine controller.

The Latronics™ Turbine Controller utilises a highly sophisticated micro-controller design to deliver a stable and safe supply of power to the grid connected inverter.

Turbine Controller

AUSTRALIAN MADE

TC SERIES

CALL 1300 550 204 www.latronics.com.au

Products

TC48 48V

TC96 96V

Load Dump

TC96 ONLY

Turbine controller

PV Edge Grid Inverter

Grid mains

MODEL SPECIFICATIONS

Model TC48 TC96

Voltage 48V 96V

Current 25A

Maximum input Max 1kW Turbine Max 2kW Turbine

Brake system Electronic PWM brake

Brake voltage 75VDC 150VDC

Dump load Not required Required

Weight 2kg

Connections Screw terminal junction boxes

Chassis Powder coated 2mm aluminium

Dimensions (mm) 260 x 160 x 100 mm

Warranty 2 years

Ratings Specifications @ 25°C ambient

© Copyright 2013 Latronic Sunpower Pty Ltd | Brochure content is subject to change without notice | 2601-0006-V1.0