Td Altosonicv12 en 130226

7/28/2019 Td Altosonicv12 en 130226

1/12

ALTOSONIC V12 Technical Datasheet

12-chord ultrasonic gas flowmeter for custody transfer

10-reflection chords for the highest possible accuracy; 2-reflection chords for

extra diagnosis options Built-in redundancy through dynamic chord substitution

Performance monitoring and fouling detection


2/12

ALTOSONIC V12

2 www.krohne-oilandgas.com

Ultrasonic gas owmeter for custody transfer

As times change, so do the requirements for ultrasonic meters. Today it is assumed that an ultrasonic device

measures accurately and precisely, but what about long-term reliability? After all, this depends on morethan just the ultrasonic meter itself. The transferred effect of the high pressure calibration on the installationconditions in the measuring station and dirt, which may collect on the meter over time, can also have anegative effect.

The unique chord arrangement of the ALTOSONIC V12 enables it to generate diagnostic data for placeswhere traditional ultrasonic meters gathered too little information or none at all: rstly at the pipe wall itself,scanning with reection. Secondly, in close proximity to the pipe wall, using the geometrical arrangement ofthe outer chords. Thirdly, at the bottom of the pipe. This data is gathered using a separate diagnostic chord.

This extremely extensive diagnostic data allows the ALTOSONIC V12 to carry out self-monitoring, which setsthe standard for other devices in terms of performance monitoring.

Highlights

12-chord design

High reliability with built-in redundancy

Swirl compensation in each measuring plane

Transducer replacement under pressure

Bi-directional ow measurement

Fully encapsulated cabling

Field display for main functions

Industries

Oil & Gas

Petrochemical

Applications

Offshore FPSO and platforms

Onshore exploration

Transmission

Underground gas storage (UGS)

Distribution

Large gas intakes, for example for

power stations, petrochemical industry,

aluminium smelters, etc.


3/12

3www.krohne-oilandgas.com

ALTOSONIC V12

Where traditional ultrasonic owmeters typically require 10D straight inlet piping with a ow conditioner or20D without a ow conditioner, ALTOSONIC V12 only requires 5D with ow conditioner or 10D without owconditioner. This not only minimizes the weight and footprint of the installation, but also saves on installationcosts and shipping costs, both during new installation as well as during re-calibration.

This much shorter installation length permits planning of more compact new metering runs and slot-inreplacement of conventional meters such as turbines during revamps.

Without Flow Conditioner

With KROHNE Flow Conditioner

Under specic conditions ALTOSONIC V12 can be installed with just 5Dand no ow conditioner, please consult KROHNE if this option is required.

Inlet / outlet run requirements


4/12

ALTOSONIC V12


FunctionsDevice Ultrasonic gas owmeter

Description ALTOSONIC V12 consists of a meter body with ultrasonic transducersand a converter box for signal processing and counter display mountedon top of the meter body .

Measurement functionality Actual volume ow rate and totalized volume; uni- and bi-directional

Applications Natural gas with a minimum of 75% methane; other applications onrequest

Nominal diameter[mm] 100, 150, 200, 250, 300, 350, 400, 450, 500, 600, 750, 900, 1000,1200,

1400, 1600, other diameters on request[inches] 4", 6", 8", 10", 12", 14", 16", 18", 20", 24", 30", 36", 40", 42", 48", 56",

64", other diameters on request

Measurement accuracyAccuracy (relative to calibrationfacility)

0.2% of measured value, high-pressure ow calibrated 0.1% of measured value, high-pressure ow calibrated andlinearized

Repeatability 0.1%

Operating conditionsFlow range See ow table

Pressure range 1...450 bar / 0.1...45 MPa / 15...6525 psi (ASME 150 2500)

Ambient temperature -40...+60C / -40+140F

Process temperature -20...+70C / -4+158F(-40+100C / -40+212F optional)

Wet gas content Typically 1% LVF,contact KROHNE for detailed sizing

CO2

content Depending on diameter and pressure,contact KROHNE for detailed sizing

Minimum pressure requirement Depending on diameter and CO2

concentration,contact KROHNE for detailed sizing

MaterialsFlanges Low temperature carbon steel A350 LF2,

(stainless steel and duplex optional)

Measuring tube Low temperature carbon steel A350 LF2 ( 14") or A333 GR6 ( 16"),(stainless steel and duplex optional)

Electronics housing Stainless steel 316

Finish Outside: 3-layer epoxy coating RAL 9006 (silver)Inside: corrosion preservative oil lmOther outside nishes available on request


5/12


ALTOSONIC V12

Electrical connectionPower supply 24 VDC / 10 W (without integrated diagnostics board)

24 VDC / 17 W (with integrated diagnostics board)

Inputs / OutputsWithout integrated diagnostics board With integrated diagnostics board

Digital outputSerial

EthernetAnalog OutputInput

4x output2x modbus over RS 485 (individuallycongurable)

5x output3x modbus over RS 485 (individuallycongurable) 2x Ethernet1x 4-20 mA1x multidrop (dual) HART

ApprovalsCustody transfer OIML R137 class 0.5 by NMi

MID (Measurement Instrument Directive 2004/22/EC) by NMiFully complaint with AGA 9 and ISO 17089

Hazardous Area ATEX:IECEx:CSA:

FM:

FM:

II 2G Ex de ma IIB T5Ex de ma IIB T5 GbClass I, Div 1 and 2, Groups B,C,D T6 T4and Class II, Div 1 and 2, Groups E,F,GClass 1, Div 2, Groups C, D T5and Class II, Div 1, Groups E, F, G (Type 4x)Class 1, Zone 1, Aex de ma IIB T5, IP66

Protection IP 66NEMA 4x

VerificationsHigh pressure hydrostatic pressure teston meter body

Standard

Factory Acceptance Test (FAT) Standard

Low pressure leakage test on nitrogenon complete meter

Standard

High pressure leakage test on nitrogenon complete meter

Optional

High-pressure ow calibration Optional


6/12

ALTOSONIC V12


[mm] c min. c max. i H2 L W Weight[kg]

ASME150

100 102 107 96 520 400* 330 151

150 154 160 144 570 450 380 238

200 202 207 191 620 600 430 351

250 254 261 239 660 750 470 498

300 303 312 284 740 900 540 719

350 333 340 312 780 1050 570 911

400 381 391 358 840 1200 620 420

450 428 442 405 890 1350 670 529

500 477 489 448 940 1500 720 709600 574 591 540 1050 1800 820 1113

Dimensions and weights (metric)

[mm] c min. c max. i H2 L WWeight

[kg]

ASME600

100 97 105 96 520 400 330 168

150 146 158 144 575 450 375 271

200 193 205 191 630 600 425 411

250 242 258 239 710 750 510 618

300 289 308 284 780 900 560 850

350 317 337 312 815 1050 610 1070

400 363 388 358 880 1200 690 640

450 409 435 405 930 1350 740 805

500 455 483 448 1000 1500 820 1055

600 547 581 540 1100 1800 940 1621


[kg]

ASM

E300

100 102 107 96 520 400* 330 158

150 154 160 144 570 450 380 248

200 202 207 191 620 600 430 371

250 254 261 239 680 750 470 533

300 303 312 284 760 900 540 755

350 333 340 312 810 1050 590 1008

400 381 391 358 870 1200 650 520

450 428 442 405 920 1350 720 659

500 477 489 448 980 1500 780 862

600 574 591 540 1100 1800 920 1354

*300 mm (11,81 inch) available on requestMeters 6 and 900# are standard equipped with transducers that are retractable under pressureValues are provided as indication and might vary slightly with different schedule sizes.Values for larger diameters are available on request.


7/12


ALTOSONIC V12

[inch] c min. c max. i H2 L WWeight

[lbs]

ASM

E300

4 4.02 4.21 3.78 20.47 15,75* 12.99 348

6 6.06 6.30 5.67 22.44 17.72 14.96 547

8 7.95 8.15 7.52 24.41 23.62 16.93 818

10 10.00 10.28 9.41 26.77 29.53 18.50 1175

12 11.93 12.28 11.18 29.92 35.43 21.26 1665

14 13.11 13.39 12.28 31.89 41.34 23.23 2223

16 15.00 15.39 14.09 34.25 47.24 25.59 1147

18 16.85 17.40 15.94 36.22 53.15 28.35 1453

20 18.78 19.25 17.64 38.58 59.06 30.71 1901

24 22.60 23.27 21.26 43.31 70.87 36.22 2986


[lbs]

ASME600

4 3.82 4.13 3.78 20.47 15.75 12.99 370

6 5.75 6.22 5.67 22.64 17.72 14.76 598

8 7.60 8.07 7.52 24.8 23.62 16.73 906

10 9.53 10.16 9.41 27.95 29.53 20.08 1363

12 11.38 12.13 11.18 30.71 35.43 22.05 1874

14 12.48 13.27 12.28 32.09 41.34 24.02 2359

16 14.29 15.28 14.09 34.65 47.24 27.17 1411

18 16.10 17.13 15.94 36.61 53.15 29.13 1775

20 17.91 19.02 17.64 39.37 59.06 32.28 2326

24 21.54 22.87 21.26 43.31 70.87 37.01 3574

[inch] c min. c max. i H2 L W Weight[lbs]

ASME150

4 4.02 4.21 3.78 20.47 15,75* 12.99 333

6 6.06 6.30 5.67 22.44 17.72 14.96 525

8 7.95 8.15 7.52 24.41 23.62 16.93 774

10 10.00 10.28 9.41 25.98 29.53 18.50 1098

12 11.93 12.28 11.18 29.13 35.43 21.26 1585

14 13.11 13.39 12.28 30.71 41.34 22.44 2009

16 15.00 15.39 14.09 33.07 47.24 24.41 926

18 16.85 17.40 15.94 35.04 53.15 26.38 1166

20 18.78 19.25 17.64 37.01 59.06 28.35 156324 22.60 23.27 21.26 41.34 70.87 32.28 2454

Dimensions and weights (imperial)

*300 mm (11,81 inch) available on requestMeters 6 and 900# are standard equipped with transducers that are retractable under pressureValues are provided as indication and might vary slightly with different schedule sizes.Values for larger diameters are available on request.


8/12

ALTOSONIC V12


Dimensions and weights (metric)


[kg]

ASME1500

100 97 103 96 530 500 340 221

150 146 155 144 600 600 400 434

200 193 203 191 660 800 480 652

250 242 255 239 760 750 580 1030

300 289 304 284 860 900 660 1507

Meters

6 and

900# are standard equipped with transducers that are retractable under pressureValues are provided as indication and might vary slightly with different schedule sizes.Values for larger diameters are available on request.

[mm] c min. c max. i H2 L W Weight[kg]

ASME900

100 97 103 96 520 400 330 176

150 146 155 144 590 600 390 324

200 193 203 191 660 600 470 464

250 242 255 239 730 750 550 684

300 289 304 284 810 900 610 957

350 317 334 312 840 1050 650 1190

400 363 381 358 890 1200 710 720

450 409 429 405 960 1350 790 964

500 455 478 448 1020 1500 860 1254600 547 575 540 1160 1800 1050 2200


[kg]

ASME2500

100 97 103 96 574 500 390 298

150 146 155 144 681 750 490 658

200 193 203 191 729 800 550 946

250 242 255 239 844 1000 670 1664

300 289 304 284 947 1200 750 2359


9/12


ALTOSONIC V12


[lbs]

ASME2500

4 3.82 4.06 3.78 22.60 19.69 15.35 657

6 5.75 6.10 5.67 26.81 29.53 19.29 1451

8 7.60 7.99 7.52 28.70 31.50 21.65 2086

10 9.53 10.04 9.41 33.23 39.37 26.38 3669

12 11.38 11.97 11.18 37.28 47.24 29.53 5202

Dimensions and weights (imperial)


[lbs]

ASME1500

4 3.82 4.06 3.78 20.87 19.69 13.39 487

6 5.75 6.10 5.67 23.62 23.62 15.75 957

8 7.60 7.99 7.52 25.98 31.5 18.90 1438

10 9.53 10.04 9.41 29.92 29.53 22.83 2271

12 11.38 11.97 11.18 33.86 35.43 25.98 3323

[inch] c min. c max. i H2 L W Weight[lbs]

ASME900

4 3.82 4.06 3.78 20.47 15.75 12.99 388

6 5.75 6.10 5.67 23.23 23.62 15.35 714

8 7.60 7.99 7.52 25.98 23.62 18.50 1023

10 9.53 10.04 9.41 28.74 29.53 21.65 1508

12 11.38 11.97 11.18 31.89 35.43 24.02 2110

14 12.48 13.15 12.28 33.07 41.34 25.59 2624

16 14.29 15.00 14.09 35.04 47.24 27.95 1588

18 16.10 16.89 15.94 37.8 53.15 31.10 2126

20 17.91 18.82 17.64 40.16 59.06 33.86 276524 21.54 22.64 21.26 45.67 70.87 41.34 4851

Meters

6 and

900# are standard equipped with transducers that are retractable under pressureValues are provided as indication and might vary slightly with different schedule sizes.Values for larger diameters are available on request.


10/12

ALTOSONIC V12


Flow Table

Size [mm]nom.

Size [inch]nom.

Qmin Qmax Qmin Qmax[m3/h] [cf/h]

100 4 25 1,000 900 35,300

150 6 45 2,300 1,600 81,200

200 8 75 4,100 2,600 145,000

250 10 110 6,200 3,900 219,000

300 12 140 8,200 4,900 290,000

350 14 170 9,700 6,000 343,000

400 16 210 11,700 7,400 413,000

450 18 240 13,900 8,500 491,000

500 20 260 15,700 9,200 554,000600 24 285 21,400 10,100 756,000

750 30 450 30,900 15,900 1,091,000

900 36 650 44,500 23,000 1,572,000

1000 40 800 54,900 28,300 1,939,000

1050 42 880 58,000 31,100 2,048,000

1200 48 1,200 75,800 42,400 2,677,000

1400 56 1,600 94,200 56,500 3,327,000

1600 64 2,100 117,000 74,200 4,132,000

Qt as per ISO 17089 (Vt=3 m/s Sch 80 values might vary slightlyCalculations are provided as indication, please ask KROHNE for detailed sizing.


11/12


ALTOSONIC V12


12/12

Contact

Head ofce KROHNE Oil & GasKROHNE Oil & Gas B.V.Minervum 74414817 ZG LH BredaThe NetherlandsTel.: +31 76 711 200 0Fax: +31 76 711 200 [email protected]

Global companies and representativesThe current list of allKROHNE contacts andaddresses can be found at:www krohne-oilandgas com

KROHNE Oil & Gas

Overview

Systems

Flowmeters for custody transfer

Liquid owmetering systems

Gas owmetering systems

Wet gas metering systems

Provers & master meters

Flow computing, supervisory software &

analyzer management

Calibration systems

Tank inventory & management systems

Analyzer houses and shelters

Loading & off-loading systems

Leak detection and localisation systems

Revamps & upgrades

Testing, installation, commissioning,

service training

Products

Gas ultrasonic owmeters for custody transfer

Liquid ultrasonic owmeters for custody transfer

Mass owmeters for custody transfer

Venturis for wet gas metering

Prover sphere detectors

Flow computers

Supervisory systems

Meter validation software packages

Electromagnetic owmeters

Level measuring instruments

Variable area owmeters

Temperature measuring instruments

Pressure measuring instruments

Analyzers

Vortex owmeters

Flow controllers

K

ROHNE03/2013-Allrightsreserved

Subjecttochangewithoutn

otice-Errorsandomissionsexcepted

Documents

Td Altosonicv12 en 130226