-
7/27/2019 tde-u200
1/3
TIME DELAY RELAYProduct TDE-U200 series
2-pole delay-off timer relay Country of Origin: The
Netherlands
Dimensions Company
P.O. Box 70233502 KA Utrecht
The Netherlands
T +31 (0)30-288 13 11
F +31 (0)30-289 88 16
E [email protected]
I www.nieaf-smitt.nl/railway
Connection Diagram
DescriptionElectronic plug-in delay-off railway timer-relay with
one change-over contact and one NO contact.
Equiped with one LED that indicates energization .
The delay-off time is adjustable with a lockable knob. Fixed
times are possible. (No knob)
The TDE-U200 does not need auxill iary supply .
The TDE-U200 relays are pluggable in to standard D-U relay
bases.
Coil Data (DC) Timing diagram
Type Unom (V) Umin (V) Umax (V)TDE-U201 24 16.8 30
TDE-U202 48 33.6 60 supply
TDE-U203 72 50.4 90
TDE-U204 110 77.0 138 contacts
TDE-U205 96 67.2 120 t offTDE-U207 36 25.2 45
Nom. powerconsumption < 1.5 W at Unom
Release time depending on set value of the drop-out time
Standard time ranges, 0.1 - 1 s 0.3 - 3s 1 - 10 s 3 - 30 s 10 -
100 s
adjustable
Adjustment accuracy < 10%
Repeat accuracy 2 %
Time var iat ion vs vol tage var iat ion 0.1 %/ % Unom
vs temperature variation 0.2 % / K
Recovery time < 0.3 s
Pull-in time < 40 ms
Max permissible ripple 24 % Unom
Min permissible residual voltage 5 % Unom
11
12
76
40
5
6
1
2
3
4
7
8
9
10
13
13
14
NIEAF-SMITT 617650000.TSP-01 18-02-2005
-
7/27/2019 tde-u200
2/3
Contact dataMax. Make Current 15 A Material Ag + 0.2 m Au
Nom. Current 6 A (AC1 ; IEC 60947) Contactgap 0.3 mm
Max. Breaking Capacity Insulation between 1 kV,
DC 300 V,300 mA open contacts 50 Hz, 1 min
AC 250 V, 2.6 A Contactforce > 20 cN
Min. Contact continuity 4V/2mA/0.1W-VA Note: contacts cannot
have a different
Max. Contact Resistance 15 m (ini tial) posit ion. (Forced
contacts, Weld no transfer)Maximum Switching Capacity and Contact
life
General DataDielectric strength
Pole-Pole EN 50155 2 kV, 50 Hz, 1 min
Cont-Coil IEC 60077 2 kV, 50 Hz, 1 min
Pulse Withstanding IEC 60255-5 5 kV ( 1.2/50 s )
Vibration IEC 60077 5 g at 50 Hz
IEC 60571 2 g at 10 - 150 Hz
EN 50155
Shock IEC 60077 5 g at 50 Hz
Mechanical life 30*106
ops
Max. Switching Frequency 1200 ops/h
Weight 140 g
Temperature Tamb,max +70 C
Tamb,min -25 C
Humidity 80%, condensation not permitted
Protection IP 40
Materials Makrolon
Melamine Polyester
OptionsB Magnetic arc blowout
E Gold plated contacts
K Special dust protection (only for fixed time setting)U Double
make contact
Max Switch ing Capacity
10
100
1000
10 100 1000
Volt
Watt
DC
1 contact
DC
2 contacts
in serie
Contact Life
1
10
100
0,10 1,00 10,00 100,00
No of ops (x10
6
)
%ofmaxswitchingcap.
DC resistive
DC inductive
NIEAF-SMITT 617650000.TSP-02 18-02-2005
-
7/27/2019 tde-u200
3/3
Aust ral ian Dist ri bu to r
Relay Monitoring Systems Pty Ltd6 Anzed CourtMulgrave, Victoria,
3170, Australia
Phone: +61 3 8544 1200Fax: +61 3 8544 1201Email:
[email protected]: www.rmspl.com.au
mailto:[email protected]://www.rmspl.com.au/http://www.rmspl.com.au/mailto:[email protected]
