USA TEADIT ® North America, INC 1465 E. Sam Houston Pkwy South Houston, Texas 77503 Phone: 800-999-0198- (281) 476-3900 Fax: (281) 476-3999 Ron Walters [email protected] www.teadit-na.com TEADIT ® has introduced two packing products for use in VOC Fugitive Emissions valve service. These new products were designed to meet the US EPA Enhanced LDAR requirements and EU’s IPPC (Integrated Pollution Prevention and Control) directive. TEADIT ® Style 2236 Spool Stock Packing and 010-ELE Combo Set offers solutions to US EPA and EU VOC Fugitive Emissions Directives. TEADIT ® Style 2236 Single Spool Valve Packing is self-lubricating, non- hardening, dimensionally stable and resistant to gases and fluids as well as heat, pressure and chemicals. Its development stemmed from the industry’s need to meet low emission requirements with a single spool stock product. A joint study between TEADIT ® and 2 major Refinery Groups gave birth to this new technology. Extensive In-house testing was conducted to optimize the braiding construction and impregnation that form the major advantages of Style 2236. Laboratory tests performed by internationally recognized Yarmouth Research and Technology, LLC installing 5 cut rings from the spool confirmed the maximum leakage of 20 PPMv after the completion of 5000 mechanical and 10 thermal (room to 260° C/500° F) cycles. Due to its physical properties and ability to minimize friction, TEADIT ® Style 2236 is ideal for valves and can be used within a broad range of applications. Style 2236 has also been regarded by AMTEC laboratory in Germany, as high-sealing system for the purposes of TA-Luft, satisfying the tightness criteria of VDI 2440. The figure below shows that Style 2236 will maintain low stem torque values even when high installation stresses are applied. This aspect is important in allowing a valve to actuate effectively and makes it ideal for a broad range of applications. TEADIT ® 010-ELE “Extremely Low Emissions” Combo Set combines 4 rings of “Packing A” plus 1 ring of “Packing B” following the arrangement “A-A-B-A-A”. Laboratory tests performed by internationally recognized Yarmouth Research and Technology, LLC confirmed the maximum leakage of 10 PPMv after the completion of 5000 mechanical and 10 thermal (room to 500° F) cycles. Its high temperature flexible graphite and Inconel® filament jacket affords mechanical stability while the advanced construction provides the best leakage control and high integrity in hydrocarbon and steam services. TEADIT ® Style 2236 and 010-ELE Combo Set are “Certified Low-Leaking Packing Technology” Fugitive Emissions designated products. EUROPE TEADIT ® International Rosenheimer Str.10 - 6330 6330 Kufstein-Austria Phone: +43-5372-64020-0 Fax: +43-5372-64020-20 Slobodan Rogosic [email protected] www.teadit.eu

TEADIT Style 2236 Spool Stock Packing and · Ron Walters [email protected] TEADIT® has introduced two packing products for use in VOC Fugitive Emissions valve service. These new products

Download PDF Report

Upload
others
View
5
Download
0

Embed Size (px)

Citation preview

Page 1: TEADIT Style 2236 Spool Stock Packing and · Ron Walters ronw@teadit.com TEADIT® has introduced two packing products for use in VOC Fugitive Emissions valve service. These new products

USATEADIT® North America, INC

1465 E. Sam Houston Pkwy SouthHouston, Texas 77503

Phone: 800-999-0198- (281) 476-3900Fax: (281) 476-3999

Ron Walters [email protected]

TEADIT® has introduced two packing products for use in VOC Fugitive Emissions valve service. These new products were designed to meet the US EPA Enhanced LDAR requirements and EU’s IPPC (Integrated Pollution Prevention and Control) directive.

TEADIT® Style 2236 Spool Stock Packing and 010-ELE Combo Set offers solutions to US EPA and EU VOC Fugitive Emissions Directives.

TEADIT® Style 2236 Single Spool Valve Packing is self-lubricating, non-hardening, dimensionally stable and resistant to gases and fluids as well as heat, pressure and chemicals. Its development stemmed from the industry’s need to meet low emission requirements with a single spool stock product. A joint study between TEADIT® and 2 major Refinery Groups gave birth to this new technology. Extensive In-house testing was conducted to optimize the braiding construction and impregnation that form the major advantages of Style 2236. Laboratory tests performed by internationally recognized Yarmouth Research and Technology, LLC installing 5 cut rings from the spool confirmed the maximum leakage of 20 PPMv after the completion of 5000 mechanical and 10 thermal (room to 260° C/500° F) cycles. Due

to its physical properties and ability to minimize friction, TEADIT® Style 2236 is ideal for valves and can be used within a broad range of applications. Style 2236 has also been regarded by AMTEC laboratory in Germany, as high-sealing system for the purposes of TA-Luft, satisfying the tightness criteria

of VDI 2440. The figure below shows that Style 2236 will maintain low stem torque values even when high installation stresses are applied. This aspect is important in allowing a valve to actuate effectively and makes it ideal for a broad range of applications.

TEADIT® 010-ELE “Extremely Low Emissions” Combo Set combines 4 rings of “Packing A” plus 1 ring of “Packing B” following the arrangement “A-A-B-A-A”. Laboratory tests performed by internationally recognized Yarmouth Research and Technology, LLC confirmed the maximum leakage of 10 PPMv after the completion of 5000 mechanical and 10 thermal (room to 500° F) cycles. Its high temperature flexible graphite and Inconel® filament jacket affords mechanical stability while the advanced construction provides the best leakage control and high integrity in hydrocarbon and steam services.

TEADIT® Style 2236 and 010-ELE Combo Set are “Certified Low-Leaking Packing Technology” Fugitive Emissions designated products.

EUROPETEADIT® International

Rosenheimer Str.10 - 63306330 Kufstein-Austria

Phone: +43-5372-64020-0Fax: +43-5372-64020-20

Slobodan Rogosic [email protected]