Tebis KNX - Home and Building Control System

7/21/2019 Tebis KNX - Home and Building Control System

http://slidepdf.com/reader/full/tebis-knx-home-and-building-control-system 1/622

System principles:

- B us structure

- Uniform co ntrol by sys tem devices

and actuators

- P anels and sensors connected to the

bus for rea l time c ommunica tion a nd

display

- S oftwa re to prog ram a nd set the

interac tion of s ystem d evices ,ac tuators and sensors, for automation

and multi-use control

tebisIntelligent control systemfor buildings

System applications:

- Intelligent buildings

- High-clas s villas , apa rtments a nd

homes

System control capability:

- Lighting

- Motorised curtains, blinds, a wnings

and sunshade

- Motorised windows- Air-cond itioners /he at ing eq uipments

- P umps for poo ls and reticulation

- Electrica l app lianc es a nd eq uipment

System advantages:

- Energy efficient

- Automatic scenes a nd functions

- Quick, intuitive a nd s tylish interfa ce s

- Flexible

- Expandable

- Extra low vo ltage c ontrol for sa fety

a nd reliab ility



Major control functions:

- Co mputer interface c ontrol

- Telephone keypa d co ntrol

- Infrared remot e control

- Intelligent switch co ntrol

- Timer con trol

- Light and w eather sensor control

- Co nsta nt luminanc e control

- Movement and presence detec tioncontrol



kallysto.art

Frame Design

Glass - White

P rod uc t C a tegories

kallysto.pur

Frame

kallysto.stil

Frame

kallysto.art

Frame

tebis

Actuator

tebis

Intelligent P ane l

tebis

Input Compo nents

tebis

Sys tem

Components

Tec hnica l

Information tebis

2

耦

耦

TXA110

1

TA008

kallysto.pur

Frame Design

kallysto.stil

Frame Design

kallysto.art

Frame Design

Therma l Plas tic

Bus Coupler

kallysto.art

Frame Design

Glas s - Mint

Multifunctional

Intelligent P ane l

Multifunctional

Infrared Remote

Controlled Panel

Switch

Actuator

Light Modulation

Actuator

Curtain Actua tor

Input Controller Time Controller B rig htness

Sensor

System Devices

Sys tem P rinciple

and Structure

Scene Module /

Logic Module

kallysto Frame

Tec hnica l

Information

Accessories

tebis KNX

Tec hnica l

Information

Page 16

Page 12

P a ge 20 P a ge 21 P a ge 22

Page 28 P a ge 29 P a ge 31

Page 38 Page 41 Page 45

P a ge 48 P a ge 51 P a g e 53





kallysto.art

Frame Design

Glass - Black

kallysto.art

Frame Design

Aluminum S ilver

kallysto.art

Frame Design

Aluminum Bla ck

IR Remote

Controller

180o

Movement

Detector

Tem pe rat ure

Control Pa nel

Tem pe rat ure

Control Actua tor

Presence

Detector

LCD C ontrol

Panel

Tem pe rat ure

Tran sm itter /Regulator

Visua liza tion

Software

Page 23 P a ge 24 P a ge 25

P a g e 32 P a ge 33 Page 35

Page 46

Page 54 Page 56 Page 58

Page 63



Hi-tec h yet s imple, a perfec t

combina tion: tebis in kallysto

The kallysto intelligent switch panel provides multiple control

functions, such as switching, light modulation, curtain control,

sc ene co ntrol, etc. There are numerous frame a nd co lor options to

compliment the individual style of users and the decorative aspects of

the building.

tebis in ka llys to.pur tebis in ka llys to.s til tebis in ka llys to.a rt

2 Buttons P anel 4 Buttons P a nel 6 Buttons P a nel



Bathroom

Ceiling

BathroomLeft mirror

Living Roo m

Wa ll



Tota l ha rmo ny

Bus coupler and kallysto panel kallysto Frame

tebis P anel

teb is Temp era ture

Control Panel

kallysto.pur

kallysto.stil

kallysto.art

Sense the perfect combination of technology and design

- The s tylish kallysto switch panel features numerous colour and

ma teria l choices to c ompliment yo ur individua l

- Each b utton function is ab le to be programmed using s oftware



Very comprehensive

Here you can see the different styles of kallysto switches, which can

a ll be c ustom ized to s uit your individua l req uirements.

Each style can support a variety of functionality:

- kallysto.pur is s mooth a nd perfect

- kallysto.stil is of innervations

- kallysto.art feels overfly

Multifunction intelligent panel

USB data ada pter interface

Intelligent temperature

control panel

Movement detector

kallysto Intelligent Panel

tebis in kallyst o.pur

tebis in kallyst o.s til

tebis in kallysto .a rt



" Pe rfect sq uare, a simple yet

convincing geometric shape,

which fits into a construction

world consisting of differences."

Till Schneider, Architect,

Frankfurt am M ain

kallysto.pur

S mooth a nd P erfect

Without c lutter, plain, s ymmetrica l: tha t is the sty le o f kallysto.

pur. The integ rated outline w ith slight co nca vity provides vivid

functiona lity, a nd versa tility.

G lossy White Ivory White



S ilver Cha rcoa l G rey S ilve r / C ha rc o a l G re y C ha rc o a l G re y / S ilve r

kallysto.pur Frame Design

12 kallys to.pur Frame Design



Feature:

- Decorative fram es for

kallyst o.p ur, kallysto. stil,

kallysto.a rt matc h d ifferent

panels

Benefits:

- Intercha ngea ble with all

kallysto panels and covers

- Easy to clean

Tec hnica l information is sho wn

on Page 71

kallysto.pur, 1 gang

Features:

- Material: thermal plastic

- Horizontal or vertical installation

Designa tion Ref.

kallysto.p ur, 1 ga ng, g loss y white WYR110

kallysto.pur, 1 gang, ivory white WYR111

kallysto.pur, 1 gang, silver WYR116

kallysto.p ur, 1 ga ng, c harcoa l grey WYR117


Features:



Designa tion Ref.


kallysto.pur, 2 gang, ivory white WYR121kallysto.pur, 2 gang, silver WYR126



Features:



Designa tion Ref.





ka llys to.pur Fra me Des ign

WYR110

WYR120

WYR130




Features:



Designa tion Ref.

kallysto.p ur, 4 ga ng, g los sy w hite WYR140





Features:



Designa tion Ref.

kallysto.p ur, 5 ga ng, g los sy w hite WYR150




ka llys to.pur Fra me Des ign

WYR140

WYR150



" Here, you perceive shapes and

functions as having the sa me

importance with the combination

of originality and creativity."

U lrich H enzler, Architect, Stuttgart

kallysto.stil is b as ed upo n a simple de sign, where thorough

co nsideration is g iven to functionality. This func tion as a

human interfac e is foremost. G entle lines e nsure the ba lanc e

betwe en functionality a nd d eco ration, so it a ppears restrained.

The c ha rac ter of kallyst o.s til lies in: a n innovative outline a nd

gentle arched edge frame with accurate edges and corners –

for perfect harmony.

kallysto.stil

Of innervations

G los sy White S ilver



kallysto.stil Frame Design

16 kallyst o.s til Fra me Design

Cha rcoa l G rey S ilver /Cha rcoa l G rey C ha rcoa l G rey /S ilver



ka llys to.s til Fra me Des ign

kallysto.stil, 1 gang

Features:



Desig na tion Ref.

kallysto .stil, 1 gang , gloss y white WYR210

kallysto .stil, 1 g ang , s ilver WYR216

kallysto.stil, 1 gang, charcoal grey WYR217


Features:



Desig na tion Ref.





Features:



Desig na tion Ref.




WYR220

WYR230

WYR210

Feature:

- Decorative frames for

kallysto.pur, kallysto.stil,

kallysto.art

Benefits:

- Intercha ngea ble w ith a ll

kallysto panels and covers

- Easy to clean

Technica l information as show n

on Page 72




Features:



Designa tion Ref.

kallysto.s til, 4 ga ng, g lossy w hite WYR240

kallysto.s til, 4 ga ng, silver WYR246


ka llys to.s til Fra me Des ign


Features:- Material: thermal plastic


Designa tion Ref.

kallysto.s til, 5 ga ng, g lossy w hite WYR250

kallysto.s til, 5 ga ng, silver WYR256


WYR240

WYR250



" Here lays the purest esthetics:

clarity, everlasting beauty, and

the symbol of character."

M irea C abani, Architect, D usseldorf

With kallysto.art: the s trict, straight lines a nd s culpted

finish w ill satisfy the mos t de mand ing a nd exc lusive, des ign

req uireme nts . Whilst the kallysto.art pa noramic frame with

it's distinctive shadow lines creates the illusion of floating.

kallysto.art

S heer elega nce

S ilver /Cha rco al G reyG lossy White Cha rcoa l G rey /S ilver



kallysto.art Frame Design

20 Therma l P las tic

21 G lass - White

22 G lass - Mint

23 Glass - Black

24 Aluminum S ilver

25 Aluminum B lac k

G la ss - White G la ss - Mint Aluminum S ilver Aluminum B lac k



ka llys to .a rt Fra me Des ig n: Therma l P la s tic

kallysto.art, 1 gang, thermal plastic

Features:

- Material: thermal plas tic


Desig na tion Ref.

kallysto.a rt, 1 g ang , g loss y white WYR510

kallysto.art, 1 gang, silver WYR516

kallysto.a rt, 1 ga ng, c harcoa l grey WYR517


Features:



Des ig na tion Ref.





Features:- Material: thermal plas tic


Desig na tion Ref.





Features:



Desig na tion Ref.





Features:



Desig na tion Ref.




WYR510

WYR520

WYR530

WYR540

WYR550

Feature:



kallysto.art

Benefits:


kallysto pa nels a nd c overs

- Easy to c lean Tec hnica l informat ion is s how n

on Page 73



ka llys to .a rt Fra me Des ig n: G la s s - White

kallysto.art, 1 gang, glass - white

Features:

- Material: sa fety glass, toughened, light g laze

Designa tion Ref.

kallysto.a rt, 1 g ang , g las s - w hite WYR510G


Features:


Designa tion Ref.



Features:


Designa tion Ref.



Features:


Designa tion Ref.



Features:


Designa tion Ref.


WYR510G

WYR520G

WYR530G

WYR540G

WYR550G

Feature:



kallysto.art

Benefits:



- High quality, safety glass with

a light glaze Tec hnica l informat ion is sh ow n

on Page 73



ka llys to.a rt Fra me Des ig n: G la ss - Mint

kallysto.art, 1 gang, glass - mint

Features:


Desig na tion Ref.

kallysto.a rt, 1 g ang , g las s - mint WYR514G


Features:


Desig na tion Ref.



Features:


Desig na tion Ref.



Features:


Desig na tion Ref.



Features:


Desig na tion Ref.


WYR514G

WYR524G

WYR534G

WYR544G

WYR554G

Feature:



kallysto.art

Benefits:


kallysto panels a nd c overs

- High quality, safety glass with

a light glazeTec hnica l informat ion is sh ow n

on Page 73



ka llysto .a rt Fra me Des ig n: G la s s - Bla ck

kallysto.art, 1 gang, glass - black

Features:

- Material: safety glass, non-friable, glazing light

Designa tion Ref.

kallysto.a rt, 1 ga ng, glass - blac k WYR517G


Features:


Designa tion Ref.



Features:


Designa tion Ref.



Features:


Designa tion Ref.



Features:


Designa tion Ref.


WYR517G

WYR527G

WYR537G

WYR547G

WYR557G

Feature:

- Fra mes of ka llysto.pur,

kallysto.stil, kallysto.art match

different panels

Advantages:

- Adapt for all the panels and

covers

- High-q uality pure glass ,

glazing light, and comfortable

keys Technica l information a s show n

on Page 73



ka llys to .a rt Fra me Des ig n: Aluminum S ilver

kallysto.art, 1 gang, aluminum silver

Features:

- Material: aluminum

Des igna tion Ref.

kallysto.art, 1 gang, aluminum silver WYR516A


Features:


Des igna tion Ref.



Features:


Des igna tion Ref.



Features:- Material: aluminum

Des igna tion Ref.



Features:


Des igna tion Ref.


WYR516A

WYR526A

WYR536A

WYR546A

WYR556A

Feature:- Decorative frames for


kallysto.art

Benefits:

- Intercha ngea ble with a ll


- High q ua lity, a luminium

Tec hnica l informa tion is

shown on Page 73



ka llys to .a rt Fra me Des ig n: Aluminum B la c k

kallysto.art, 1 gang, aluminum black

Features:


Designa tion Ref.

kallysto.a rt, 1 g ang , a luminum black WYR517A


Features:


Designa tion Ref.



Features:


Designa tion Ref.



Features:- Material: aluminum

Designa tion Ref.



Features:


Designa tion Ref.


WYR517A

WYR527A

WYR537A

WYR547A

WYR557A

Feature:- Decorative frames for


kallysto.art

Benefits:



- High q ua lity, a luminium

Tec hnica l informa tion is

shown on Page 73



Hi-tech, yet S imple = P erfect:

teb is in kallysto

Intellig ent Touch P a nel

WYT340KNX Multifunc tiona l

intellige nt to uch pa nel

4 buttons

WUT03Bus co upler

for intellige nt touc h pa nel and

movement d etector

WYT360KNX Multifunctional


6 buttons

WYT320KNX Multifunc tiona l


2 buttons



tebis Intelligent touch panel

28 Bus co upler

29 Multifunctiona l intelligent touch pa nel

31 Multifunctiona l infra red remote

controlled intelligent touch panel

32 IR remo te co ntrol

33 180o Movement detector

35 Temp era ture co ntrol pa nel

WYT360IRKNX Multifunc tion Infrared

remote controlled intelligent

touch pa nel, 6 buttons

WYT510CKNX 180

o Movement

detector

WYT610CIndoor temperature control

panel with LCD display

Ba sing upon

the world

recognized

EIB/KNX s ta nd a rd of ISO/IEC

14543-3, te bis insta lla tions

are much safer.

TK124

Universa l IR remote c ontrol



Features:

- Bus connecting terminal

available

- Tw o different bus c oup lers

available

Advantages:

- Insta llation direction a djusta ble

- Physical address programming

for selection

B us C oupler

Bus coupler for intelligent panel and movement detector

Characteristics:

- Mains voltage: 30V DC s ystem voltage by b us c onnecting terminals

To b e us ed in intellige nt pa nel WYT32x /34x /36x /36xIR a nd

mo veme nt dete cto r WYT51xa

(X: 0 = g loss y white, 6 = s ilver, 7 = cha rcoa l grey)

Desig na tion Ref.

Bus coupler for intelligent panel and movement detector WUT03

WYT61x bus coupler for room air conditioner

Characteristics:


WYT61x pa nel for roo m a ir co nditioner

(X: 0 = g loss y white, 6 = s ilver, 7 = cha rcoa l grey)

Desig na tion Ref.

WYT61x bus co upler for roo m a ir co nditioner WUT06

USB data interface

Characteristics:


As ETS d a ta interfa ce w ith com puters or lap tops

Desig na tion Ref.

USB data interface WYT710

Cover for USB data adapter

Characteristics:

- Material: thermoplastic material

- With fixing s crews provided

Co ver for UP parts: used for KNX/US B da ta ad ap ter interfac e WYT710

Desig na tion Ref.

Co ver for USB da ta a da pter, TAE, gloss y white WYA500

Co ver for USB da ta ad a pter, TAE, silver WYA506

Co ver for USB d ata ad a pter, TAE, cha rcoa l grey WYA507

WUT03

WUT06

WYT710

WYA500



Multifunctiona l Intellig ent P a nel

Feature:

- Fram es for kallysto .pur,

kallysto .stil, kallysto .a rt to

match different panels

- For each button there a re two

indica ting co lors (G reen/Red)- Illuminant label window,

ac ces sible to Hage r lab elling

so ftware Semiolog to prepare

labels

- Protection for mecha nica l

installation

- Dimens ion: 56.5 x 56.5 mm

Advantage:

- Comprehensive functions

- Operation method convenient

for users, with installat ion in

either horizontal or vertical

orientation- Ba cklit label windows

- Labelling produced with

Hager's Semiolog software

prepara tion: in horizonta l or

vertica l format

- Tw o-c olor indica tion for

ea ch button (G reen/Red):

mod e ma y be s et a t ON/OFF

or Flash


installation: with concealed

sc rews for fixing

KNX Multifunctional intelligent panel, 2 buttons

Characteristics:

- With 2 buttons, ea ch e q uipped with 1 LED indica tor (G reen/Red)

- Label window with backlight

- Installation in either horizontal or vertical direction

Functions:

- Lighting /c urta in (ON/OFF), Dimming (UP /DOWN)

- Blocking control

- Delay function

- Control of numerical value transmission

- Scene control

Extra functions of ETS programming:

- In switching function, each button is in 2-channel mode:

Function 1 is by short press, Function 2 is by long press

- LED indicator: luminance ca n be ad justed through s oftwa re

parameters

- Backlit label window - to switch off backlighting utilise software

control

- Function select for object devices: setting through software

- Interloc k for individua l button: s etting through s oftwa re

- Reset of alarm function

- Ca ll of numerical va lues : s uch a s luminanc e (in Lux),

dimming value (in %), temperature (oC), etc.

Designa tion Ref.

Multifunctional intellige nt pa nel, 2 buttons , g los sy white WYT320

Multifunctional intelligent panel, 2 buttons, silver WYT326

Multifunctional intellige nt pa nel, 2 buttons , c harco a l grey WYT327

Bus coupler for intelligent panel and movement detector (BCU) WUT03

WYT320

Technica l information is sho wn

on Page 74



Multifunctiona l Intelligent P a nel


Characteristics:

- With 4 buttons , ea ch e q uipped with 1 LED indica tor (G reen/Red)

- Backlit label window


Functions:


- Blocking control

- Delay function


- Scene control


- During switching function, each button is in 2-channel mode:


- LED indica tor: luminance ca n be ad justed through s oftwa re

parameters


control

- Function select for objective devices: setting through software

- Interlock for individua l buttons: s etting through so ftwa re


- Ca ll of numerical va lues: suc h a s luminanc e (in Lux),


Desig na tion Ref.

Multifunctional intelligent pa nel, 4 butto ns, glos sy white WYT340


Multifunctional intelligent pa nel, 4 butto ns, cha rcoa l grey WYT347


WYT346


Characteristics:

- 6 buttons , ea ch e q uipped with 1 LED indica tor (G reen/Red)

- Backlit label window


Functions:


- Blocking control

- Delay function


- Scene control




- LED indica tor: luminesce nce c an be ad justed through s oftwa re

parameters

- Backlit label window - to switch off backlight utilise software

parameters

- Function select for object devices: setting through s oftwa re

- Interlock for individua l buttons: s etting through so ftwa re


- Ca ll of numerical va lues: suc h a s luminanc e (in Lux),


Desig na tion Ref.

Multifunctional intelligent pa nel, 6 butto ns, glos sy white WYT360


Multifunctional intelligent pa nel, 6 butto ns, cha rcoa l grey WYT367


WYT367



Multifunctional Infrared Remote Controlled

Intelligent P a nelFeatures:

- Fram es for kallysto .pur,

kallysto .stil, kallysto .a rt are

intercha ngea ble to match

different pa nels

- For each button there a re two

indica ting co lors (G reen/Red)

- Ba cklit la bel window,

compa tible with Hag er's

labelling software, Semiolog


installation

- WYT36xIR inte lligen t pa nel

with IR receiver

- KNX control

- IR TKl06/124 Re mo te c on trol

device

- IR rece iver: For use w ith Hag er

IR remote c on trols TKl06/124

and other remote c ontrols w ith

RCG A recording (e.g . P hilips

Pronto)


KNX infrared multifunctional intelligent panel, 6 buttons

Characteristics:

- With 6 buttons, ea ch e q uipped with 1 LED indica tor (G reen/Red)

- Ba cklit lab el window

- Insta lla tion in ho rizonta l or vertical o rienta tion

- Integ rated IR rece iver

- IR rec eiver: for us e w ith IR remo te c ont rollers for TKl06/124 a nd a ll

other remote controls with RCGA recording (e.g. Philips Pronto)

Functions:


- Blocking control

- Delay function


- Scene control

- IR communication channel: 24 IR commands




- LED indicator: luminesce nce c an be ad justed through s oftwa re

parameters

- Backlit label window - to switch off backlighting utilise softwarecontrol

- Function select for object devices: setting through software

- Interloc k for individua l buttons: s etting through s oftw are




Designa tion Ref.

Infra red multifunctiona l intelligent pa nel, 6 butto ns, gloss y w hite WYT360IR

Infrared multifunctional intelligent panel, 6 buttons, silver WYT366IR

Infra red multifunctiona l intelligent pa nel, 6 butto ns, cha rcoa l grey WYT367IR


WYT360IR

Advantage:



for users, with installat ion in


orientation- Backlit lable windows

- Labelling produced with

Hager's Semiolog software

prepara tion: in horizonta l or

vertical

- Tw o-c olor indica tion for

ea ch button (G reen/Red):

mod e ma y be s et a t ON/OFF

or Flash



sc rews for fixing

Technica l information a s s how n

on Page 74



IR remote controller

IR remote controller, 6 buttons

Characteristics:

- Volta ge : 2 x ba ttery LR03-AAA (included )

- 6 buttons

-

LED transmission- Effective distance of 10m

- L x W x H: 110 x 52 x 25 mm

- Front pa nel: plas tic, s ilver

- Ba ck plate: plas tic, g rey

Functions:

Co mma nds via remo te rece iver in WYT36XIR intellige nt pa nel to

a chieve co ntrol over KNX devices

- ETS o peration offers 12 indepe ndent c ommunica tion channe ls

- Lighting /c urta in (ON/OFF), d imming (UP /DOWN)

- Blocking control

- Delay function

- Scene control

- Ca ll of numerica l values (whe n ETS opera tiona l): s uch a s luminanc e(in Lux), d imming va lue (in %), te mpe ra ture (oC), etc.

Desig na tion Ref.

IR remote controller, 6 buttons TK106

Multifunction IR remote controller

Characteristics:

- Volta ge : 2 x b a ttery LR03-AAA (included )

- 49 buttons

- LED transmission

- Effective distance of 10m- L x W x H: 235 x 46 x 20 mm

- Front pa nel: a luminum

- Ba ck plate: plas tic, black

Functions:

Co mma nds visa remote receiver in WYT36XIR intellige nt pa nel to

a chieve c ontrol over 4 electric a pplianc es (e.g . TV, VCR, DVD, a nd

HiFi) and KNX devices

- ETS o peration offers 24 indepe ndent c ommunica tion channe ls

- Lighting /c urta in (ON/OFF), d imming (UP /DOWN)

- Blocking control

- Delay function

- Scene control

- Ca ll of numerica l values (when ETS has sta rted): suc h as luminanc e

(in Lux), light m od ulation va lue (in %), t emp era ture (oC), etc.

Remote Control Set:

4 cha nnels unrelate d to ea ch o ther, e.g . TV, VCR, DVD, a nd HIFI

Desig na tion Ref.

Multifunction IR remote controller TK124

TK106

TK124


on Page 75



180o Movement Detec tor

Features:

- Fra mes o f ka llysto.pur,

kallysto .s til, kallysto .a rt are

intercha neable to ma tch

different panels


Advantage:

- Extra functions o f ETS

programming

- Op eration method co nvenient

for users, with insta lla tion in


orientation



sc rews for fixing

KNX180o Movement Detector, Standard Type

Characteristics:

- Angle coverage: 180º (horizontal)

- Covered range: front 12m, side 13m

- Detec tion a ngle: 60º (vertica l)

- Cut off delay: 90 sec onds

- Luminance: 5-1000 Lux

- Insta lla tion height (reco mmend ed): 1.1m-2.2m

- Installation protection: fixing with screw under protective cover

Functions:

Detec tion is per environmenta l illumination a nd m otion (bo dy

temperature)

- ON/OFF

- P reset light thresho ld

- Blocking control

- Delay function

- Scene control

Designa tion Ref.

KNX 180o Movement Detector, S tanda rd, G loss y White WYT510

KNX 180o Movement Detector, S tanda rd, S ilver WYT516

KNX 180o Movement Detector, Sta ndard, Cha rcoa l Grey WYT517


WYT510


on Page 76



180o Movement Detec tor

KNX180o Movement Detector, Comfort Type

Characteristics:

- Angle coverage: 180º (horizontal)

- Covered range: front 12m, side 13m

- Detec tion a ngle: 60º (vertica l)- Cut off delay: 90 sec onds

- Luminance: 5-1000 Lux

- Installa tion height (recomme nded ): 1.1m-2.2m

- Installation protection: fixing with screw under protective cover

Functions:

Detec tion is per environmenta l illumina tion a nd m otion (bod y

temperature)

- Press button (ab le to be dea ctivated ): used for sw itching betw een

auto mod e /ON /OFF, w ith LED indica tion

- P ulse jigg ing for luminanc e

- ON/OFF

- Preset light modulation

- Blocking control- Delay function

- Scene control

Desig na tion Ref.

KNX 180o Movement Detector, Comfort, Glossy White WYT510C

KNX 180o Movement Detector, Comfort, Silver WYT516C

KNX 180o Movement Detector, C omfort, Charcoa l Grey WYT517C


WYT510C



Tempera ture Control P a nel

Feature:

- Same design characteristics

as the overall rang e

- Room temperature control in

combination with light control

-

Function: heating and cooling- Different he at ing /co oling

parameters

- LCD display a nd a djustab le

buttons


Advantage:



for users

- Conc ealed sc rews for fixing

-

Equipped w ith display andbuilt-in tem perature s enso rs

Indoor temperature control panel with LCD display, 6 buttons

Characteristics:

- 6 buttons , 4 for tempera ture regulation and 2 with LED indica tion

(Red /G reen), for function a ss ignmen t

- Backlit label window - LCD w ith b ac klighting

Function of room temperature regulator:

- Heating /cooling

- Two -step hea ting: general step and supplementary step

- Modes o f operation: co mfort /sta nd-by /frost or overheat

protection /forced service

- P ID regulato r panel function

Push button functions:

- Lighting /c urta in (ON/OFF), dimming (UP /DOWN)

- Blocking control

- Delay function


- Scene control




- LED indicator: luminesce nce c an be ad justed through s oftwa re

parameters


control

- Function select for objective devices: setting through software

- Interloc k for individua l button: s etting through s oftwa re



dimming (in %), te mpe rature (oC), etc.

Designa tion Ref.

Indoor temperature control panel with LCD display, glossy white WYT610

Indo or tempe rature control pa nel with LCD d ispla y, silver WYT616

Indoor temperature control panel with LCD display, charcoal grey WYT617

WYT6xx bus co upler for roo m tem perature c ontrol pane l (BC U) WUT06

WYT610


on Page 77



TX111

Po wer S upply

TXA206A

Switch Actuator

Teb is KNX/EIB provides co mprehe ns ive func tiona lity w ithin a n

open platform environment, for flexible connection to building

bus infrastructure. It offers unlimited expandability, as well as

highly accurate appliance and device control.

All elec tric a pplia nces a re

w ithin your g ra sped :

tebis KNX



Tebis is b a sed

upon the

internationally

a cc epte d ISO /EC 14543- 3 KNX-

sta ndard, for sa fer insta llation.

KNX technology is compo sed

of the three famous Europea n

bus standards, ie. EIB (electric

insta llation bus ), EHS (Europe an

home systems), and Batibus

(Heating /Ventilation /Air-

conditioning).

tebis EIB/KNX

38 teb is KNX S w itch Actua tor

41 teb is KNX Dimmer

45 teb is KNX S hutters/B linds Actua tor

46 teb is KNX Temp era ture Ac tua tor

48 teb is KNX Input Con troller51 teb is KNX Time Cont roller

53 tebis KNX Brightnes s S enso r

54 tebis KNX P rese nce Detecto r

56 teb is KNX LCD Co ntrol P a nel

58 teb is KNX Temp era tre Trans mitter

/Regulator

59 teb is KNX S ys tem Device

61 teb is KNX S ce ne Module /Log ic Module

62 teb is KNX Acc es so ries

63 teb is KNX Visualiza tion C ontrol S oftw a re

TXA213

Dimmer, 3 cha nnels

TX510

Presence Detector



tebis KNX Switch Actuator

All products are equipped

with Quick Connect terminals,

for fas t and convenient ca ble

connection. S witching loop is

controlled by receiving a control

signa l from a Tebis input d evice.Based upon the application,

switch actuators can control

lighting, window blinds and air-

conditioners. All switch actuator

individual channels are equipped

with contac t point mode display

and push buttons for manual

opera tion or multiple o perations .

Advantage:

- Quick connect terminal

- Trans pa rent label d isp la y

window for lab elling via

Hager’s Semiolog software

- Sw itching operation betwee nManua l/Auto Mod e

- Cha nnel sta tus indica tor

Switch actuator 4 channels

Outputs:

- 4 voltag e-free c ontac ts

- P owe r supply: sys tem voltage o f 30V DC

- Lighting function

- Hea ting co ntrol function (usa ble for co ntrol of 2-pipe b lower fan

coils)

Lighting functions:

- ON/OFF

- Manual control

- LED indication of each output state

- Timing func tion

- Override co ntrol- S cene function (8 in ea ch c ircuit)

- ON/OFF timing a nd ON/OFF c ounte r

Heating control function:

- Valve p rotection d evice

- Constraint control device

Desig na tion Module Width Ref.

S w itch a c tua tor 4 cha nnels , 4A 4 TXA204A

S w itch a c tua tor 4 cha nnels , 10A 4 TXA204B

S w itch a c tua tor 4 cha nnels , 16A 4 TXA204C

Switch actuator 4 channels, 16A, -200µF, adapted

for paralled compens ated fluoresc ent tubes 4 TXA204D

TXA204A


in Page 78




Outputs:


- Po wer s upply: sys tem voltage o f 30V DC

- Lighting function- Hea ting c ontrol function (usa ble for control of 2-pipe b lower fan

coils)

Lighting functions:

- ON/OFF

- Manual control

- LED indication of ea ch o utput state

- Timing func tion

- Override c ontrol

- Sc ene function (8 in eac h circuit)

- ON/OFF timing a nd O N/OFF co unte r


- Valve p rotection d evice- Constraint control device

Designa tion Module Width Ref.




Sw itch a ctua tor 6 c ha nnels, 16A, -200µF,

adapted for paralled compensated fluorescent

tubes

4 TXA206D


Outputs:


- Power supply: system voltage of 30V DC, or 230V AC, which can

be used for manual controlling without the bus voltage

- Lighting function

Lighting functions:

- ON/OFF

- Manual control


- Timing func tion

- Override c ontrol- Sc ene function (8 in eac h circuit)

- ON/OFF timing a nd O N/OFF co unte r


- Valve p rotection d evice

- Constraint control device





Sw itch a ctua tor 8 c hanne ls, 16A, -200µF,adapted for paralled compensated fluorescent

tubes

6 TXA208D

TXA206A

TXA208B




Flush mount switch module, 1 channel, 4A

Functions:

- ON/OFF S w itch

- Time delays , Sc ene se lection

- LED a nd b utton for physica l address programming, ma nual control

and product reset

Power supply: 30V DC

Output: 4A 230V AC

Dimensions: 53.5x29 mm, applicable for concealed installation in wall

Desig na tion Ref.

Sw itch mod ule, 1 c hannel, 4A TXA201A

Flush mount switch module, 2 channels, 4A

Used for control:

- Lighting

- Curtains

- Pow er sockets

- Any de vice with ope n/close co ntrol

Functions:

- ON/OFF s w itch

- ON/OFF ov erride


- Time d elay

- Scene selection

Power supply: 30V DC

Output:

- Switching contacts

- 4A 230V ACDimens ions : 52 x 24 mm, Applica ble for flush mount insta lla tion in

wall box

Desig na tion Ref.

Sw itch mod ule, 2 c hannel, 4A TXB202A

TXA201A

TXB202A


Outputs:

- 10 volt-free contacts

- P owe r supply: sys tem voltage o f 30V DC

- Lighting function

Lighting functions:

- ON/OFF

- Manual control


- Timing func tion

- Override co ntrol

- S cene function (8 in ea ch c ircuit)

- ON/OFF timing a nd ON/OFF c ounte r



S w itch a c tua tor 10 cha nnels , 10A 6 TXA207BS w itch a c tua tor 10 cha nnels , 16A 6 TXA207C

Sw itch ac tuato r 10 cha nnels, 16A, -200µF, a da pted

for paralled compens ated fluoresc ent tubes6 TXA207D

TXA207C




Universal Dimmer

With the preset scene

ad justment, different lighting

combinations can be achieved

(32 scenes). Each scene has a

rela ted sc ene s peed . All lightdimmers are eq uipped w ith an

automatic load identification

function.

Advantage:

- Quick co nnect terminals

- Trans pa rent labe l display

window

- Manual operation (Auto,

Manua l, Min, Max)- Mode display

Universal dimmer, 1 channel

Features:

- Power supply: 30V DC

- Load power: 230V AC

Functions:

- Variation in lighting

- ON/OFF

- Manual control


- Timing func tion

- Override c ontrol



Unive rs a l lig ht d immer, 1 c ha nnel, 300W 4 TXA210A

Universal light dimmer, 1 channel, 600W 4 TXA210

Universal dimmer, 3 channel

Features:


- Load power: 230V AC

Functions:


- ON/OFF

- Manual control


- Timing func tion

- Override c ontrol


3 modes possible:

- 3 x 300W

- 1 x 600W or 1 x 300W

- 1 x 900W(Each light dimmer output can detect different load type)


Universal light dimmer, 3 channel, 900W 6 TXA213

TXA210A

TXA213

teb is KNX Dimmer


in Page 80



Universal dimmer with LCD display, 1 channel

Features:


- Load pow er: 230V AC

Functions:

- Va riation in light ing

- ON/OFF

- Manual control


- Timing func tion

- Override co ntrol

- S cene function (8 in ea ch c ircuit)

- 8 light sc enes tha t ca n be a ctivated loca lly


Universa l dimmer w ith LCD display ,1

channel,1000W6 TXA215

TXA215

teb is KNX Dimmer



Switch/Light Dimmer,

3 channels

This device c a n co ntrol a lighting

control device equipped with

one 1-10V interface . A sepe rate

co ntrol relay is provided forsw itching ON/OFF and s cene

control functions are integrated.

Switch/Light Dimmer,

2 channels

2 c hanne ls sw itch/light dimmer

can b e used either as a switch/

light dimming relay with 0-10V

interface and sw itch output, orin connection with the Hager

op tica l s ens or TK023 for

constant lux control.

Switch/Light dimmer, 1 channel

Outputs:

- 1 - 10V control output terminal with a 16A relay


Functions:


- ON/OFF


- Manual control

- ON/OFF sta tus indica tion


S w itch/Light d immer, 1 cha nnel 4 TX214

Switch/Light dimmer, 3 channels

Outputs:

- 1 - 10V control output terminal with 3 x 16A relays


Functions:


- ON/OFF


- Manual control

- ON/OFF sta tus indica tion


S w itch/Light d immer, 3 cha nnels 4 TX211

TX214

TX211

teb is KNX Dimmer


in Page 80



Light sensor

Features:

- S ize: Dimension 54 x 20 mm

- To b e a ss ociated with the TK022


Light s ensor - TK023

TK023

Switch/Light Dimmer, 2 channels

Outputs:

- 2 relay output, 16A, 230V AC

- 2 outputs for ba llast 0-10V interface

- Power supply: 30V DC- Light sensing range of about 200-1200 Lux


S w itch/Light Dimmer, 2 cha nnels 4 TK022TK022

teb is KNX Dimmer



teb is KNX S htters/B linds a c tua tor

Shutters/Blinds Actuator

By using roller ac tuato r, four

rollers can be controlled

independently. Aside from

es se ntial co mma nds (Up/Dow n)

there are several operationpossibilities to make adjustment

sa fer and more versatile, e.g :

- Safety control circuit to

prevent a ccidents

- Preset at any location

- Adjustable safe location

- Mode d isplay

Advantage:

- Quick co nnect terminal

- Trans pa rent labe l display

window

- Manual operation

Shutters actuator

For co ntrol of roller-s hutter curta ins or Vene tian blinds mo tors

Features:- Power supply: 30V DC

- 4 or 8 s output terminals for electric mo tors

Functions:

- Up /Dow n /S top running

- Up /Down /Stop manual control

- Alarm and forced function

- Sc enes c an b e a ctivated by input devices (8 modes /circuit)

- LED sw itch mod e display


S hutters a ctua to r, 4 c ha nnels , 230V AC 4 TXA223

S hutters a ctua tor, 4 cha nnels , 24V DC 4 TXA225

S hutters a ctua to r, 8 c ha nnels , 230V AC 6 TXA227

Blinds Actuator

Used for control of blinds actuator and roller blinds actuator

Features:


- 4 or 8 s output terminals for electric mo tors

Functions:

- Up /Dow n /S top running- Up /Down /Stop manual control

- Alarm and forced function

- Sc enes c an b e a ctivated by input devices (8 modes /circuit)

- LED sw itch mod e display


B linds ac tua tor, 4 cha nnels , 230V AC 4 TXA224

B linds ac tua tor, 4 cha nnels , 24V DC 4 TXA226

B linds ac tua tor, 8 cha nnels , 230V DC 6 TXA228

TXA225

TXA224


in Page 84



teb is KNX Tempera ture Control Ac tua tor

Thermostat TX320:

Continuous room temperature

regulator, featuring real-time

temperature meas urement,

capa ble of s ending a n

ad justment value to a servoor actua tor, so to a chieve the

desired room temperature. It can

control both hea ting device a nd

air-conditioners.

Heating output, 6 channels:

This device is d es igned for

installation into a hot water

circulation system, to control

a 24V valve servo, e.g.: floor

hea ting fac ilities . Output

sw itching utilises a Triac so

that noiseless switching can be

acheived.

Valve Control Servo

This s ervo ha s a bus c onnection,

which can be directly installed

onto the universal valve

of radiating hea ters. The

correspond ing va lve servo a ndmotorized de vice is co ntrolled via

the roo m te mperature c ontroller.

Thermostat

Feature:


- Meas uring ra nge: 0˚C - 40˚C

- 3 external contact points used for measuring input terminals, such

as window magnetic c ontact points

- Size: length x width x height: 80 x 84 x 27 mm

Function:

- Heating /cooling

- 2-step heating - P rimary a nd S upplementary- Work mode: Co mfort, Sta ndby, Night time, Frost/overhea t

protection

- Switch, light dimming, blinds control


Thermosta t - TX320

Floor tempera ture s ensor for TX320 - EK087

Heating Valve Controller, 6 channels

Feature:

- P owe r supply: 230 V powe r socket

- Sys tem voltage o f 30V DC

- Property: 6 channels for 24 V heating valve drive

(Max 13 pc s /cha nnel)

- 6 cha nnels output

- S ize: length x w idth x he ight: 302 x 755 x 70 mm

Function:

- Adjusting value in %

- Override se rvice

- Summer o peration


Hea ting va lve controller, 6 cha nnels - TX206H

TX320

TX206H


in Page 84



Valve Control Servo

Features:


- Property: 5 LED used to display servo locations

- Interface: 1m, 6-core cable is included- Size: length x width x he ight: 302 x 755 x 70 mm

Functions:

- Forced service

- Summer ope ration


Va lve C ontrol S ervo - TX501

Valve Control Servo with room temperature regulator

Features:


- Property: 5 LED’s used to display servo locations

- Interface: 1m, 6-core cable is included

- Size: length x width x he ight: 302 x 755 x 70 mm

Functions:

- Automatic regulating apparatus and temperature collection

apparatus

- Work mode: C omfort, S ta ndby, Nighttime, Fros t

- Orientated start up

- Forced service

- Summer ope ration


Valve C ontrol Servo w ith room te mperature

regulator- TX502

TX501

TX502

teb is KNX Tempera ture C ontrol Ac tua tor



tebis KNX Input Devices

Input devices transfer operating

information to co ntrol different

output devices .

Input Devices with Voltage

Free ContactsTX302, TX304, TX308 a re

installed within a wall box or

a w a ll ca vity. They ca n be

connected to any normal press/

return switch.

Flush Mount 2 channels Voltage Free Contact

For connection of:

- Normal switch button

- Window conta ct point

- Universal alarm contact point

- Temp era ture c ont roller input

Input terminal:

- For connection of voltage free contact point (Max 5m)

- The Interrog ation vo lta ge to b e g enerate d from d evice (S ELV)

Features:


- Size: height x width x depth: 35 x 38 x 12mm

Functions:

- ON/OFF, Dimming , UP /DOWN (w ith ala rm function)

- Override co ntrol

- Time de lay func tion

- Scene call


Flus h Mo un t 2 c ha n ne ls Vo lt a ge Fre e Co nt a ct - TX302


For connection of:


- Window conta ct point

- Universal alarm contact point


Input terminal:


- The Interrog ation vo lta ge to b e g enerate d from d evice (S ELV)

Features:

- Power supply: 30V DC;

- Size: height x width x depth: 35 x 38 x 12mm

Functions:

- ON/OFF, Dimming , UP /DOWN (w ith ala rm function)

- Override co ntrol


- Scene call


Flus h Mo un t 4 ch a nn els Vo lt a ge Fre e Co nt a ct - TX304

Input devices

TX314/TX316

React upon receipt of a 230 V

input signal

TX302

TX304


in Page 87




with 4 LED Output terminals

For connection of:


- Window conta ct point- Universal alarm contact point


Input terminal:


- The Interrog a tion voltage to b e g enerate d from d evice (S ELV)

LED output terminal:

- Output terminal (Max 5m) prog ramma ble a nd c ontrolled by

indica tor board, mode display, feedba ck signal

Features:


- Output voltage: 2V DC- Output current: 0.85 mA

- Size: height x width x depth: 35 x 38 x 12 mm

Functions:

- ON/OFF, Dimming , UP /DOWN (w ith ala rm funct ion)

- Override c ontrol


- Scene call


Flush Mount 4 cha nnels Voltag e Free C onta ct

with 4 LED Output terminals- TX308

Red LED insta lla tion pa cka ge for TX308, 5 x 8mm - TG308

4 channels input module

Features:


- Equial potential terminal

Input terminal:

- 4 Input terminals for 230V AC

- Connection of push button

Functions:- ON/OFF, Dimming , UP /DOWN (w ith ala rm funct ion)

- Override c ontrol


- Heating Co ntrol

- Scene call


4 cha nnels input module, 230V 2 TX314

TX308

TX314




6 channels input module

Features:


- 230V AC /50Hz

Input terminal:

- 6 230V AC input terminals

- Applicable for connection of push button /switch with LED

indica tor. (10 mA lea kag e c urrent o n ea ch input terminal)


4 cha nnels input module, 230V 4 TX316

TX316




teb is KNX: Time S w itc h

Time Switch

- Sw itch program ca n be

stored in programming key -

EG005 which c omes with the

TX022.

- Programe ca n be s implyactivated by insertion of the

programming key into the time

sw itch. The time sw itch will

start to run the program stored

in the programm ing key.

- Using the programming key

provides a simple a nd sa fe

copy of a sequence of input

switching.

- Override control and priority

control

Time switch, 2 channels

Features:


Functions:

- Output light dimming value

- ON/OFF

- Up/Dow n (e.g .: sh utter/blind)

- Hea ting co ntrol function (da y/night)

- Output da te and time

- Master /slave function

- Scene ca ll


Time sw itch, 2 cha nnels 2 TX022

Locking Key

Authorization control to prevent change switch program

Features:

- Co lor: y ellow

- Protection of program and operation buttons


Yellow key - EG004

- Temp ora ry priority co ntrol

- Winter /s ummer sc hedule

- Lithium battery with a 5-year

functioning reserve

- Up to 56 program steps

- Programmable by computer(via EG003U)

- Bar display chart of day profile

- Weekly progra m included

- 2 cha nnel control

- Impulse cyc le time s etting

- Holida y mod e

- Ca n be locked using the

EG004 locking key

TX022

EG004


in Page 88



Programming key

Supplied keys have b een pre-programmed to “ continuous close”

mode. Spec ific programs ca n be installed to run on the time s witch

by inserting the programming key into the time switch.

Features:- Color: grey


P rogra mming key, g rey - EG005

Storage module

For storage of 3 programming locking keys


Key s tora ge module 1 EG006

Software and programming key adaptor

Programming key ad aptor a nd so ftware for the computer

programming of keys.

Features:

- Supplied with softwa re and the requested ca ble connection

- Simple computer programming for programmable keys


So ftware and programming key ad apter,

RS232 computer interface- EG003

So ftware and programming key ad apter,

USB computer interface - EG003U

EG005

EG006

EG003U

teb is KNX: Time S w itc h



teb is KNX Light S ens itive S w itch

Light Sensitive Switch

Features:


Functions:

- ON/OFF

- Up/Dow n (e.g .: s hutters or b linds )

- Sending lumunance values

- Master a nd s lave function

- Manual operation

- LED sta tus indica tor

- Scene ca ll

Setting:

- Luminance : in 2 rang es : -2 to 200Lux /200 to 20,000Lux

- Sw itch selection: Auto / Manua l /Test

- Luminance threshold va lue ca n be ad justed through po tentiometer

- Luminance range a djustme nt a nd c a librat ion c arried o ut in Tes t

Mode


Lig ht S ens itive S witc h, w ithout s ens or 2 TX025

Light Sensor (Flush Mount)

Features:

- 1m co nnecting c ab le supplied in de livery (2 x 0.75mm 2)


Light S ensor (Flus h Mount) - EE002

Light Sensor (Surface Mount)

Features:

- Sensor interface: 2 x 0.75 to 4 mm 2


Light S ensor (S urfa ce Mount) - EE003

A Light Sensitive Switch reacts

to s unlight to a utomate the

control of sunlight circuits - ON/

OFF, or shutters a nd b linds - UP/

DOWN.

Each light sensitive switch

meas ures the a mount of sunlight

through a light s ensor a nd

autumates control by co mparing

these measurements against

of the preset value threshold of

Luminance (2… … 20,000LUX).

TX025

EE002

EE003

Mas ter/s lave functiona lity via

the bus is a lso an o ption for

controlling lager outputs.


in Page 89



tebis KNX: P res ence Detec tor

- Mas ter/slave function

- Manual adjustment of device

- Luminanc e ra nge: 5 - 1200Lux

- Cutoff delay

- Large collecting range: 13 x 7

meters

- Ada pt to the roo m size

with the rotating lens

Presence detector, 2 channels

Features:


- S ize: 110 x 44 mm

- Color: white

Functions:

- S witc h ON/OFF lighting c ontrol

- UP /DOWN sh utter and blind c ont rol

- Timer

- Heating control

- Override control

- Scene ca ll

- Dimming


Channel 1 “Lighting device”:

- Co ntrol the s ite s tatus and luminanc e (5-1200Lux)

- Cuto ff delay on device o f 1min - 30 min. (on ETS 5s - 8s )

Channel 2 “Air-conditioning device”:

- Delay connection function (lowest 15 min.): e.g.: heating device,

ventilating unit, in channel 2 “Air-conditioning device control” will

sw itch on these d evices when s ite sta tus beco mes s table in 15 min

- Cut-off delay o n device of 1min - 30 min


P resence detec tor, w ith bus coupler - TX510

TX510


in Page 90

Presence detecto rs are mainly

used for the co ntrol of lighting

devices , in respo nse to room

brightness and occ upancy. Light

regulation is also possible with

the TX511.

Energy s avings a nd a higher

level of comfort ca n be ac heived

by installing these devices..



Presence detector, with constant luminance control

Features:


- Size: 110 x 44 mm

- Color: white

Functions:

- ON/OFF lighting co ntrol

- UP /DOWN shutter and blind co ntrol

- Timer

- Heating control

- Override control

- Scene ca ll

- Dimming


3 potentiometers settable:

- Po tentiometer 1 “ close”: presenc e d etector c ontrol (without

lighting cha nnel co ntrol)- Potentiometer 2: constant luminance control through device Lux

value ( 50 to 700 Lux) adjustment

- Potentiometer 3: Cutoff delay of 1min - 3 min


Presence detecto r, w ith cons tant luminance

control, bus coupler- TX511

Installation wall box

Bottom housing us ed for insta llation of presence d etector

TX510/TX511. Features:

- Size: 70 x 42 mm

- Color: white


Ins ta lla tion w a ll box, w hite - EE813

TX511

EE813

tebis KNX: P res ence Detec tor



teb is KNX LCD C ontrol P a nel

4-channel switch:

4 sens itive sw itch buttons to

freely c onfigure c ontrol functions .

And 4 sw itch buttons loca ted

at the ed ge of the LCD screen

can carry out a variety of controlfunctions suc h as : ON/OFF, Up/

Down, S cene transfer, etc.

LCD:

Dynam ic la belling display for

sw itch operation, plus mod e

indication of other bus-

connected devices. Examples

include the lumina nce value

of a light dimming output,

tempe ra ture (interior/ext erior) or

the weather status of a w eather

sta tion (wind s peed , Lux value).

Data ca n be displayed assymbols or in text.

In addition, mutual connection

of mode displays can b e

ac hieved w ith “And” a nd “Or”

programming.

LCD s tructure:

- Divided into one central zone

and four exterior zone s (next

to the button)

4-button LCD

Features:


- Size: 80 x 80 mm

Functions:

- ON/OFF

- UP /DOWN

- Dimming

- Timer

- Scene ca ll

- Display screen: with And /Or function mode display

Desig na tion Module Width Ref.4-button LCD c ontrol unit w ith bus co upler,

white /grey- TX450A

4-button LCD c ontrol unit w ith bus co upler,

silver /grey- TX450B

- Centra l zone: 1- 4 lines for

reading (when there is no

cha nge in character size)

- In all the zones text or

symbols c an be used to

display mode mess age, d ate,time o r loc a l temperature

- Ba cklight lamp: a ctivated with

button or in alarm clock

function, with other functions

closed through time setting

- Measuring the local

temperature

- Date and time

- Alarm clock function (four

tones)

LCD screen:

Display ca n be s et for wea ther,

to display as standard fortemperature c ontrol mode and

button. Displays c an b e shifted.

In button mode, existing time

and temperature a re displayed.

In temperature control mode,

besides existing temperature,

set temperature values of all

the operations modes are

also displayed, which can be

changed through button.

TX450A


in Page 91



4-button LCD temperature control panel

Features:


- Size: 80 x 80 mm

Temperature control:

- Heating /co oling

- Two -step he a ting: P rima ry and a uxilia ry

- Work mode : C omfort, S ta ndby, Nighttime, Ove rheat/fros t

prevention

- PID regulator

Other functions:

- ON/OFF

- UP /DOWN

- Dimming

- Timer

- Scene ca ll


4-button LCD tem perature c ontrol unit,

white /grey- TX460A

4-button LCD tem perature c ontrol unit,

silver /grey- TX460B

TX460A

teb is KNX LCD C ontrol P a nel



teb is KNX: Temperature Trans mitter

/Regulator

Temperature transmitter:

Collect temperature da ta via an

analog signal from the EK086,

and send the temperature value

to the KNX bus.

Temperature control input module

Power supply:

- Sys tem voltag e is da ta b us s upplied 30V DC

- Measuring range : - 30 C̊ ~ + 50 C̊

Functions:

- Temp era ture trans mitter with limit value a larm


Tempera ture control input module 3 TE001

Temperature sensor

Features:

- With protection case for outdoor temperature measurement

- For co nnec tion with TE001


Tempera ture sens or, IP 65 - EK086

Temperature regulator:

Suitable for single room

adjustment. In temperature

regulation mod e four grades

are provided to control the

tempera ture. They ca n beco ntrolled directly or via a time

sw itch. Co -ordination ca n be

maintained with a tebis KNX time

management controller.

TE001

EK086


in Page 92



Line coupler

Line coupler and area coupler

are mainly used to connect 2

KNX bus lines or a reas . This

device ca n be used a s a signal

am plifier or a da ta filter for busto bus communica tion.

USB Interface

For connecting a computer to the

KNX bus, via a USB connection

or an R S232 co nnection. This is

for the purpose of programming

tebis KNX devices . In ad dition,it ca n also be used for the bus

connection of visualization

equipment, computer monitoring

and centralized control.

tebis KNX: System devices

Line coupler

Features:

- Po wer supply: system voltage o n bus 30V DC

- Applica tions: one b ranch is a llow ed to c onnect ma ximum 64 bus

components

Functions:- Amplifying bus signa l

- Data filtering


Line co upler 2 TA008

Interface

TH001 Features:

- Interface: 9-core D-Sub to slot

- Size: 70 x 70 x 35 mm

- Connection to bus ba r wire

TH101 Features:

- B model USB s lot


US B interfa ce module 2 TH101

RS 232 interfa ce module 3 TH001

Power supply module

Features:

- P ow er supply: 230V AC, 50Hz

- Output voltage: (SELV) 30V


P ow er s upply module, 320mA 4 TX111

P ow er s upply module, 640mA 6 TX110TX110

TA008

TH101


in Page 93



Wall-mounted computer RS232 interface

Features:

- For using ETS, to be a ble to co nnect KNX to c omputer or la ptop

for ETS programm ing. Bus co upler TA004 is used to c onnec t

buses


Wa ll-mounted computer RS 232 interfa ce - TH002

Bus coupler, for TH002 interface

Features:

- P owe r supply: sys tem voltag e on b us 30V DC

- Use d in c omb ina tion w ith TH002


B us coupler, for TH002 interfa ce - TA004

IP gateway

- By utilising a LAN or WAN connection, the KNX system can be

expanded ac ross two o r more buildings

- KNX quick co mmunica tion

- KNX data ca n be trans mitted directly to any user over a netw ork

- Remo te a cc ess to the EIB/KNX netw ork from anyw here

- Convenient connection to monitoring a pparatus a nd ma nag ement

sys tem equipment

Power supply:

30V DC bus ba r wire + 24V AC/DC (12-30V AC /DC )

Connection:

Bus ba r wire + pow er supply: 2 KNX connecting b locks,

Ethernet/IP netw ork: RJ45 s oc ket


IP gatew ay 2 TH210

TH002

TA004

TH210

DALI gateway

DALI gateway is an interface between a KNX system and a DALI

lighting s yste m. The DALI ga tew a y permits the co ntrol of a ma ximum

64 DALI devices , (e.g ., DALI ba lla sts ). Ea ch DALI device ca n a ppoint

as many as 32 lighting groups, which are controlled by KNX.

- C ertified tra de ma rk: KNX/VDE

- Ambient temperature: -5°C ~ 45°C

- Storag e and transporting temperature: -25°C to + 70°C

- Max d istanc e: N/A

- KNX po w er supp ly voltag e: 21 ~ 32V DC S ELV

- Power consumption: normally 150 mW

- Co nnection: S ta nda rd KNX/EIB b us ba r co nnection terminal

- Externa l supply vo ltag e: 110 ~ 240V AC+ 10%/- 15%, 50/60 Hz


DALI ga tew a y 4 TX216

TX216

tebis KNX: System devices


in Page 94

Technica l information a s s how nin Page 95



teb is KNX: S c ene /Log ic Mod ule

Scene module:

for storage of a specific scene

and control of lighting, window

blind etc

Scene module:

Features:


Functions:

- 8 x sw itch /w indow blind

- 8 x light dimmer

- 2 x switch and 4 x light dimmer


S cene module 1 TK015

Logic module

Features:


Functions:

- 8-way “and” Logic /8-way “or” Logic

- 4 changeover gates

- trigger gate function


Log ic module 1 TK016

Logic module:

tebis logic module is used for

logic control within the system

TK015

TK016



teb is KNX: Acces sories

Telephone interface

Manual operation, voice guidance, authorization cod e, a nd a larm

function for connection to the tebis sys tem. Ca n be use d in

co njunction with an indepe ndent input device, s uch a s: TX314.

The telephone interface TH020B ca n function over telephone netw orkto control some automated functions. By tone dialing (via a land line

or mob ile pho ne) the releva nt numbers into the input side of the

device, connection can be made to 3 output terminals, or enquiries

made regarding their mode status. An alarm output terminal can

transmit pre-recorded texts to the three pre-defined telephone

numbers. In addition, temperature measurements from an Input

terminal ca n a lso be trans mitted.

Features:

- Output terminal has 3 relay outputs 5A /250V AC

- Input termina l: a larm input 0 - 30V AC/DC; 1 a larm input 0 - 230V

AC; 1 Input terminal NTC 10 kilohm for tem pera ture mea suring

- Use with a sensor: such as EK086

- Analog telephone interface


Telepho ne interfac e,

3 Input terminals and 3 Output terminals6 TH020B

TH020B

Bus insert connection terminal

Features:

- 2 x 4 insert co nnection terminal, dia. 0. 6 - 0. 8 mm

Desig na tion Ref.

Bus inse rt connec tion te rmina l, red/blac k TG008

System cable

Features:

- EIB - Y (S T)Y 2 x 2 x 0. 8 (Volta ge w iths ta nd ing: 4KV)

Desig na tion Ref.

System cable, 100m TG018

System cable, 500m TG019

Sys tem ca ble, without halogen, 100m TG060

Sys tem ca ble, without halogen, 500m TG061

Flush mount wall box

Features:

- Function: use fo r mounting ka llysto sw itches within multiple fram e

installations

- Outline d imens ion: 40mm x 71mm x 71mm

Desig na tion Ref.

Flush mount wall box WE 841

TG 008

TG 018

WE841



tebis KNX: Visualization Control Software

Through visualiza tion so ftwa re,

a c omputer ca n display the

status of the connected

equipment within a building,

offering centra lized monitoring

and control over an installation.Acc ess is via a n integrated

website browser over a LAN or

Internet connection. Password

protected user access is a

standard feature within this

visualisation control system.

Functions:

- Alarm proces s, e-mail

information, mo nitoring a nd

control (e.g.: network video

ca mera), log ic function, timing

function, counting function,

digital function and sc enefunction, m od e mo nitor,

excel data export, datab as e,

ca lenda r program, movie

function, use of full touch

screen, and system logbook

Visualization control software:

- Demo is limited to half hour pres enta tion

Des igna tion Module Width Ref.

Visualization software capable of controlling <50 group a ddress

- TJ659

Visualization software capable of controlling <

100 group a ddress- TJ660

Visualization software capable of controlling <


Visualization software capable of controlling >


Client softw a re - TJ663

P roject vers ion - 99P99918

Configuration requirement for

computer:

- Minimum a P entium 4 1.2G Hz

Processor

- Minimum 256MB RAM

- CD-ROM- Serial RS232 or USB interface

- Internet connection with

e-mail ca pac ity

Requirements for software:

- Windows XP Operation

System

- IE6

- DirectX (Version 9b)

- Acrobat Reader

Note:

- For installation of the software

into a Windows XP operating

system, supervisor privileges

for administration of the

computer must be ava ilab le,as well as IE6, DirectX (Version

9b) and Acrobat Rea der

Thes e w ill also be c onta ined

on the visua lisa tion s oftwa re.

Software should be activated

within 20 da ys after the initial

insta llation, w ith a valid a ctivation

code.

TJ 662

Documents

Tebis KNX - Home and Building Control System