AMSL/CHD/2011-12 November 10, 2011

PROPOSAL – II (Digital Radiography System 800mA – 03 Nos. Sl. No. 17, Department of Radiology )

The Head (P & CD),HLL Lifecare Limited,For and on behalf of Ministry of Health & Family Welfare,Procurement and Consultancy Division,B -14A, Sector – 62,NOIDA – 201 301 (U. P.).

Ref.: - Your Tender Enquiry No. HLL/PCD/PMSSY/23/11’-12’ dated 11.07.2011, Corrigendum No. 1 dated 24.08.2011, Corrigendum No. 2, Corrigendum No. 3 & Corrigendum No. 4 for the Supply of Medical Equipments at Medical Colleges under PMSSY Scheme, due on 17.11.2011 at 2:00 p.m. (IST), Techno–Commercial Tender to be opened on 17.11.2011 at 2:30 p.m. (IST).

MARS 80 (Digital Radiography System with ‘U’ Arm Stand and Flat Panel based Detector)

TECHNICAL COMPLIANCE

Sr. No.

SPECIFICATIONS ASKED IN THE TENDER

ALLENGERS SPECIFICATION Page No.

Direct Digital X-ray unit with one flat panel for complete range of general radiography. It should be possible to do all the general radiological imaging like chest, abdomen, musculoskeletal, joints, PNS, Skull and Spine etc. with or without movement of table/ Table - tube assembly. It would have following specifications:

Offered model MARS 80 is a Solid-State Flat Panel based Digital Radiography X-ray unit with a flat panel detector suitable for complete range of general radiography. Unit is capable to do all the general radiological imaging like chest, abdomen, musculoskeletal, joints, PNS, Skull and Spine etc. with or without movement of table/ table-tube assembly. Our offered unit has following features: -

1. Generator

a) Microprocessor controlled high frequency generator

Microprocessor controlled high frequency X-Ray generator will be provided.

b) Output 64 kW or more Power output: 80KW(Better Specs)

c) KVP range 40 KV to 150 KV. KV range: 40 KV to 150 KV.

d) Should have automatic exposure control with ionization chamber.

Automatic exposure control device with ionization chamber enables auto selection of Radiographic factors, saves time, eliminates retake, increases diagnostic capability and lowers radiation dose is provided.

Page 1 of 5

2. Table

a) It should have a movable carbon fibre or equivalent radiology table with effective and fool proof braking system

Mobile table having table top of carbon fibre material with effective and foolproof braking system is provided.

b) It should be possible to do all the general radiological imaging like chest and abdomen in supine and erect position, all musculoskeletal and joints imaging, PNS, Skull and spine in AP, PA and lateral views etc. with or without movement of table in supine erect or sitting position.

Offered unit is capable to do all the general radiological imaging like chest and abdomen in supine and erect position, all musculoskeletal and joints imaging, PNS, Skull and spine in AP, PA and lateral views etc. with or without movement of table in supine erect or sitting position.

c) Cross lateral imaging for chest should be possible.

Cross lateral imaging for chest is possible.

3. Detector system:

The detectors should be able to do all routine Radiography examination. It should have following Features:

The detector is able to do all routine radiography examination.

It has following features: a) Amorphous Silicon technology. Flat panel detector is based on Amorphous

Silicon (a-Si) technology.b) Cesium iodide scintillation Scintillator material: Cesium Iodide

c) X-Ray sensing surface (Detector Size) 42cm x 42 cm (16.8" x 16.8") or more.

X-ray sensing surface: 43cm x 43cm (17” x 17”)

(Better Specs)d) Image Matrix 2500 x 2500 Pixel

or more. Image matrix: 3072 x 3072 pixels

(Better Specs)e) Pixel size 160 micron or less Pixel Size: 143µm.

(Better Specs)f) Very high DQE (Digital Quantum

Efficiency) DQE (Digital Quantum Efficiency): > 70%

(Better Specs)g) Spatial resolution 3 LP / mm. or

better. Spatial resolution: 3.5 line pairs/mm

h) Continuously adjustable source to image distance (SID) of 100 cm - 180 cm.

Continuously adjustable source to image distance (SID): 100cm to 180cm.

a) The tube assembly should follow the detector system for auto anatomical positioning. It is clarified that the bidders may quote U arm type/C arm type/ceiling suspended or floor mounted models as long as other parameters of specifications are met.

U-Arm stand is provided. X-Ray tube and detector is fitted on U-Arm stand due to which X-Ray tube is auto aligned with flat panel detector, at all times during application.

Page 2 of 5

4. Rotating Anode X-ray Tube

Rotating Anode X-ray Tube of minimum 30 / 70 KW capacity, Dual Focus:0. 6mm/1.2 mm, 9000 RPM. Anode heat storage capacity minimum 300 KHU or more.

One No. Dual focus rotating anode X-Ray tube with following focal spots is provided:

Small focus: 0.6mm² with power output 40KW.Large focus: 1.2mm² with power output 100KW.Anode heat storage capacity: 300KHU.Anode rotation speed: 10,000 rpm

(Better Specs)5. Operating Console (To be placed in console room)

a) Operating console software should be integrated with X-ray control and should have facility to show all X-ray parameters/does for examination done.

Yes Provided.

b) Operating Console should have facility for patient ID entry, Viewing, Processing and Documentation of images.

Operating Console has facility for patient ID entry, Viewing, Processing and Documentation of images.

c) Should have monochrome medical grade LCD Display monitor of 18" size or more with antireflective front screen and matrix size 1024 x 1024.

One no. 19” monochrome medical grade LCD monitor with antireflective front screen and of matrix size 1280 x 1024 will be provided.

(Better Specs)

d) Diagnostic image should be available 5 second after exposure. Specify the time.

Diagnostic image is available in 3 seconds after exposure.

(Better Specs)e) The next exposure should be

possible while processing is in progress on the operating system.

The next exposure is possible while processing is in progress on the operating system.

f) Image storage capacity 30,000 Hard disc with image storage capacity of 30,000 images will be provided.

g) System should have inbuilt CD/DVD writer with facility to write images.

System has inbuilt CD/DVD writer with facility to write images.

6. Connectivity to Camera

Connectivity to Camera - The bidder to provide connectivity to dry chemistry camera already available in the department. Camera with 500 dpi or more to be quoted separately as optional.

Offered unit can be connected to any existing dry chemistry camera available in the department.

1 No. Dry chemistry camera of resolution 508PPI is quoted separately as optional in price bid.

Page 3 of 5

7. DICOM compatibility.

It should be DICOM compatible to receive, send, print images. It should be ready for connectivity for any network computer.

Unit is DICOM compatible to receive, send and print images.Facility of connectivity to any network computer is available.

8. Accessories

Voltage stabilizer 75 KVA with spikes protectors for the whole system.

One No. Voltage Stabilizer of 100 KVA with spikes protectors for whole system is provided.

(Better Specs)

…

9. Optional Items:

The price of following optional items to be quoted separately. The final decision to purchase these items will be taken at the time of placing orders.

The price of following optional items is quoted separately in price bid.Acceptable.

…

a) Image stitching software Image stitching software …

b) Wireless microphone One No. Wireless microphone …

c) Lead glass of size 80 x 100 cms One No. Lead glass of size 80 x 100 cm …

d) 500 CDS and 250 DVDs (Blank). 500 Nos. Blank CDs and 250 Nos. DVDs. …

e) There should be vertical stand with bucky for chest examination (Price to be quoted separately)

One No. Vertical Bucky Stand along with oscillating grid of ratio 8:1, 85 lines / inch is provided. Chest stand is provided to take chest radiographs.(Price quoted separately in price bid).

10. Installation:

The finished room will be provide to the bidder

Acceptable

The bidder has to do all necessary civil, electrical and mechanical work for installation of machine.

Acceptable

11. Service Centre:

The company should have an established Registered service centre with address and phone numbers in Delhi.

Address of our registered office at Delhi is enclosed.

12. Spares availability :

Company should give undertaking regarding the spares availability for next ten years.

Undertaking regarding the spares availability for next ten years is enclosed.

Page 4 of 5

13. Product datasheet:

All specifications to be provided with original product data sheet. All technical specifications should be supported with original data sheet highlighting the page number in the compliance sheet. Photocopy/computer print will not be accepted.

Original product datasheet enclosed.

Turnkey:X-Ray Installation 800mA

Acceptable as per details in tender documents quoted separately in price bid.

Being an ISO-9001: 2008 and ISO 13485:2003 Company with its Products CE Certified, Allengers ensure International Quality Standards for its Manufacture, Design, Supply, Installation & Service of X-Ray Machine.

Radiation Protection: Our Unit is approved by AERB (Atomic Energy Regulatory Board) for Radiation Safety.

Thanking you,Yours faithfully,For ALLENGERS MEDICAL SYSTEMS LTD.

(AUTHORISED SIGNATORY)

Page 5 of 5