UP-DL98C-3-8WUP-DL98C-3-8W-D

Technical ApplicationGuide for UP-SHINELED Downlight

Application notes•IP54 only for the LED cover, IP40 for other part•The lamp must be installed by professional

electrician•Ensure the power supply is switched off before

fitting this product•Do not touch the lamp when in use•Keep away from hot steam and corrosive gas

Application AreasIt is designed for general lighting applications in office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as stairway, lobby, reception, corridors etc.

Certificate

DL98 model is an integrated downlight provides the perfect combination of efficiency, light comfort and design, without compromising on lighting performance (color rendering and color uniformity). It offers a wide choice of options for creating the desired ambience.

Introduction

www.upshine.com info@upshine.com

Features 1. Integrated SMD LED down lights with diffuser. 2. No external driver required which facilitates easy installation. 3. A perfect alternative to traditional ceiling mounted luminaries. 4. Looping from luminaries to luminaries with mains through-wiring. 5. Triac Dimmable version available. 6. Good heat dissipation to ensure long life. 7. Internal Driver

Technical Specifications

Model Voltage Power PowerFactor

Beamangle Dimmable Lumen

(±5%) CCT Lifespan CRI Dimension

UP-DL98C-3-8W AC100-277V 8W ≥0.9 90° No

730 3000K

50000h ≥80Ø110*70mm

cutout 90-95mm

810 4000K

810 5000K

710 5700K

UP-DL98C-3-8W-D AC200-240V 8W ≥0.85 90° Yes

690 3000K

50000h ≥80Ø110*70mm

cutout 90-95mm

780 4000K

780 5000K

680 5700K

www.upshine.com info@upshine.com

Driver data Sheet

Fixture CompatibilityRated

WattageElectrical

ClassificationIngress

Protection Operating

TempOperatingHumidity

Storage Temp

8W Ⅱ IP40 / IP54 -20oC~45oC 0~90% -20oC~65oC

Driver data Dim Non dim

Input rated Voltage AC230V AC100-277V

Frequency 50Hz 50/60Hz

Input Voltage AC200-240V AC90-305V

Efficiency ≥83% ≥85%

Total load Wattage 8W±0.5W 8W±0.5W

Power Factor ≥0.85 ≥0.9

Rated input current ≤0.05A ≤0.09A

Full load output Voltage DC65-75V DC65-75V

Rated output current 95mA 110mA

Output current range 95mA±5% 110mA±5%

Power tolerance ±5% ±5%

Current output tolerance ±5% ±5%

Dimming range 8%-100% —

Dimmer Triac dimmers —

Short circuit protection PASS PASS

Over voltage protection PASS PASS

Over temperature protection PASS PASS

THD — —

Withstand voltage — —

Product Information

Ø11

0Ø

85

2

4670

Ø72

Photometric Diagram3000K

Polar intensity diagram Beam diagramCartesian intensity diagram

UNIT: cdAVERAGE BEAM ANGLE(50%): 93.9 DEG

-/+180

-120

-90

-30

120

90

30

0

70

140

210

280

350

0

Planar Illuminance Curve

Distance(m)

MH=10mE(LX)3.50

3.15

2.80

2.45

2.10

1.75

1.40

1.05

0.70

0.35

0

C0/180C90/270

-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 92.92deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

Flux out: 492.1 lm

5700K5000K

Polar intensity diagramPolar intensity diagram Cartesian intensity diagramCartesian intensity diagram Beam diagramBeam diagram

Height Eavg, Emax Angle: 93.80deg DiameterHeight Eavg, Emax Angle: 94.00deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

Note: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

Flux out: 482.3 lmFlux out: 499.2 lm

UNIT: cdAVERAGE BEAM ANGLE(50%): 94.2 DEG

-/+180

-120

-90

-30

120

90

30

0

70

140

210

280

350

0

UNIT: cdAVERAGE BEAM ANGLE(50%): 94.2 DEG

-/+180

-120

-90

-30

120

90

30

0

70

140

210

280

350

0

Planar Illuminance Curve

Distance(m)

MH=10mE(LX)3.50

3.15

2.80

2.45

2.10

1.75

1.40

1.05

0.70

0.35

0

C0/180C90/270

-25 -20 -15 -10 -5 0 5 10 15 20 25

Planar Illuminance Curve

Distance(m)

MH=10mE(LX)3.50

3.15

2.80

2.45

2.10

1.75

1.40

1.05

0.70

0.35

0

C0/180C90/270

-25 -20 -15 -10 -5 0 5 10 15 20 25

4000K

Polar intensity diagram Beam diagramCartesian intensity diagram

UNIT: cdAVERAGE BEAM ANGLE(50%): 94.6 DEG

-/+180

-120

-90

-30

120

90

30

0

70

140

210

280

350

0

Planar Illuminance Curve

Distance(m)

MH=10mE(LX)3.50

3.15

2.80

2.45

2.10

1.75

1.40

1.05

0.70

0.35

0

C0/180C90/270

-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 92.77deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

Flux out: 486.0 lm

Spectral Distribution

3000K

380 500 600 700 800Wavelength(nm)

Max=5613 [1.0=20000]

Spec

trum

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0380 500 600 700 800

Wavelength(nm)

Max=5206 [1.0=20000]

Spec

trum

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

380 500 600 700 800380 500 600 700 800Wavelength(nm)Wavelength(nm)

Max=7793 [1.0=20000]Max=6473 [1.0=20000]

Spec

trum

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

Spec

trum

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

4000K

5700K5000K

1.60 SDCM F4000K

x=0.3831 y=0.3839

3.00 SDCM F3000K

x=0.4453 y=0.4041

www.upshine.com info@upshine.com

5.77 SDCM F5700K

x=0.3272 y=0.3440

2.73 SDCM F5000K

x=0.3503 y=0.3626

80

70

60

50

40

30

20

10

0

18:3

7:46

19:0

7:44

19:3

7:44

20:0

7:44

20:3

7:44

21:0

7:44

21:3

7:44

22:0

7:44

23:0

7:44

23:3

7:44

0:07

:44

0:37

:44

1:07

:44

1:37

:44

2:07

:44

2:37

:44

3:07

:44

3:37

:44

4:07

:44

4:37

:44

5:07

:44

5:37

:44

6:07

:44

6:37

:44

7:07

:44

7:37

:44

8:07

:44

8:37

:44

9:07

:44

IC

Capacitor

MOS

PCB

LED

Fitting

Environmental temperature

Tem

pera

ture

(o C)

Time

The driver lifespan is based on capacitor working temperature.

Driver lifetime & LED light decay rate

90000

80000

70000

60000

50000

40000

30000

20000

10000

065oC 75oC 85oC 95oC 105oC

Life

time

(hou

rs)

Capacitor Tc (oC)

Driver Lifetime

% L

umin

ous

Flux

FLUX

△ U'V'

110%

105%

100%

95%

90%

85%

80%

75%

70%

0.0040

0.0035

0.0030

0.0025

0.0020

0.0015

0.0010

0.0005

0.00000 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

LifeTime (hours)

Polar Diagram Comparison

AVERAGE BEAM ANGLE (50%): 94.2DEG

70

140

210

280

350

0O

-/+180O

150O-150O

120O-120O

90O-90O

60O-60O

30O-30O

UNIT: cd

C0/180, 94.0 deg

C30/210, 94.3 deg

C60/240, 94.3 deg

C90/270, 94.2 deg

0

LED Light Decay Rate

Temperature● The testing is operated at 25°C

● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C

● The highest withstand temperature of IC, MOS could be 120°C

● The highest withstand temperature of LED junction temperature is 150°C

www.upshine.com info@upshine.com

Packaging Information

SIZE(CM) N.W/pc(KGS) G.W.(KGS) Q'TY(PCS)

Carton 46.1*31.4*48 0.18 6.8 24

CTNS Q'TY(PCS) VOLUME(CBM)

20'' standardcontainer 396 9504 28

40'' standardcontainer 794 19056 56

www.upshine.com info@upshine.com Phone: +86 755 2919 7389Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China

InstallationInstall requirements

A-gap above the fitting 25mm

B-gap to the building material 25mm

C-gap to the thermal insulation 25mm

6. Make sure the downlight fixed tightly in ceiling, turn on the power.

Blue

BrownL =

N =

1. Open a hole according to the cutout size of led downlight.

2. Open the line pressing cover, see Figure 1.

Figure 1

3. Put the main AC wire through line pressing clip, feed the L.N to the fast connection terminal block respectively then compress the line pressing clip.

4. Close the line pressing cover tightly.

5. Hold back spring clips then push downlight into the hole.

A BC