TECHNICAL DATA

Luceco is a registered trademark of Luceco plcLPB US JH.12122017

TECHNICAL DATA

Luceco is a registered trademark of Luceco plc

APPROVALS: TYPE: JOB:NOTES:

BACKLIT PANEL - LPB/LPBP

PRODUCT SPECIFICATIONS

INPUT VOLTAGE:

• 120-277V

CONSTRUCTION:

• Rigid extruded aluminum housing

• Four ½in knock-outs

BODY FINISH:

• Powdercoat finish in White

• All parts painted after fabrication to facilitate safe installation with smooth edges, increase efficiency, and inhibit corrosion

FEATURES

• Perfect for commercial grid ceiling applications

• Lightweight extruded aluminum housing

• Opal lens provides uniform light distribution

STANDARD EFFICACY

HIGH EFFICACY

ORDERING MATRIX

PREFIX LUMENS GENERATION DIMMING CCT SUFFIX

LPB14W = 1’X4’ (Up to 135lm/W) G2 D = 0-10V 35 = 3500K -US35 = 3500lm (26W)40 = 4000K

LPB22W = 2’X2’ (Up to 106lm/W) 35 = 3500lm (33W)

LPB24W = 2’X4’ (Up to 111lm/W) 70 = 7000lm (63W)

PREFIX LUMENS GENERATION DIMMING CCT SUFFIX

LPBP14W = 1’X4’ (Up to 135lm/W) G2 D = 0-10V 35 = 3500K -US35 = 3500lm (26W)40 = 4000K

LPBP22W = 2’X2’ (Up to 135lm/W) 35 = 3500lm (26W)

LPBP24W = 2’X4’ (Up to 141lm/W) 70 = 7200lm (51W)

ORDERING EXAMPLE: LPBP14W35G2D40-US

• Integrated LED

• Recessed and surface mount options available

• Emergency accessory available

• 0-10V Dimmable

LENS:

• Diffused lens for uniform light distribution andno hot spots; low glare

• Fully sealed for LED protection

ACCESSORIES: Emergency battery (shipped separately)

CONTROL OPTIONS: 0-10V Dimming

MOUNTING OPTIONS:

• Grid Ceiling

• Recessed option (provided separately)

• Surface Mount option (provided separately)

COLOR TEMPERATURE: 3500K and 4000K as

standard. Other color temps available; subject to minimum quantity.

CRI: Up to 80

EFFICACY: Up to 144 Lm/W

IGNITION TIME: Less than 1sec.

OPERATING TEMPERATURE: -20°C to 50°C

POWER FACTOR: Greater than 0.95

IP RATING: IP20

LISTINGS: DLC, UL for insulation contact (IC) and non-insulation contact (non-IC)

WARRANTY: 5 years

ACCESSORIES

MODEL NUMBER DESCRIPTION

LPBFS14W-US 1’x 4’ Surface Mount Frame

LPBFS22W-US 2’x 2’ Surface Mount Frame

LPBFS24W-US 2’x 4’ Surface Mount Frame

LPFR14W-US 1’x 4’ Recessed Mount Frame

LPFR22W-US 2’x 2’ Recessed Mount Frame

LPFR24W-US 2’x 4’ Recessed Mount Frame

LPBEM-US 90 min Emergency Battery

US Help line - 1 800 645-6460p - 281 978-2509

e -

Visit our website at

www.luceco.com

Luceco Inc

3010 Claymoore Park Dr Houston, TX 77043

TECHNICAL DATA

Luceco is a registered trademark of Luceco plcLPB US JH.12122017

POLAR CANDELA DISTRIBUTION

5/15/2017 LPB14W28D40/F-US

http://www.visual-3d.com/tools/photometricViewer/default.aspx?sessionid=762801 1/4

OUTDOOR PHOTOMETRIC REPORTCATALOG: LPB14W28D40/F-US

MANUFACTURER:TEST #: LPB14W28D40/F-USTEST LAB: LUCECOTEST DATE: 2015??10??24??DESCRIPTION: �

LAMP OUTPUT: 1 LAMP, RATED LUMENS/LAMP: 2950.4INPUT WATTAGE: 25.6LUMINOUS OPENING: POINTMAX CD: 1,030.7 AT HORIZONTAL: 0°, VERTICAL: 5°CUTOFF CLASS: CUTOFFROADWAY CLASS: TYPE VSEFFICIENCY: 99.9%

VISUAL PHOTOMETRIC TOOL 1.2.46 COPYRIGHT 2017, ACUITY BRANDS LIGHTING.THIS PHOTOMETRIC REPORT HAS BEEN GENERATED USING METHODS RECOMMENDED BY THE IESNA. CALCULATIONS ARE BASED ONPHOTOMETRIC DATA PROVIDED BY THE MANUFACTURER, AND THE ACCURACY OF THIS PHOTOMETRIC REPORT IS DEPENDENT ON THEACCURACY OF THE DATA PROVIDED. END-USER ENVIRONMENT AND APPLICATION (INCLUDING, BUT NOT LIMITED TO, VOLTAGEVARIATION AND DIRT ACCUMULATION) CAN CAUSE ACTUAL PHOTOMETRIC PERFORMANCE TO DIFFER FROM THE PERFORMANCECALCULATED USING THE DATA PROVIDED BY THE MANUFACTURER. THIS REPORT IS PROVIDED WITHOUT WARRANTY AS TO ACCURACY,COMPLETENESS, RELIABILITY OR OTHERWISE. IN NO EVENT WILL ACUITY BRANDS LIGHTING BE RESPONSIBLE FOR ANY LOSSRESULTING FROM ANY USE OF THIS REPORT.

LPB14W28D40/F-USVISUAL PHOTOMETRIC TOOL PAGE 1 OF 4

5/15/2017 LPB22W35D40/F-US

http://www.visual-3d.com/tools/photometricViewer/default.aspx?sessionid=226551 1/4

OUTDOOR PHOTOMETRIC REPORTCATALOG: LPB22W35D40/F-US

MANUFACTURER:TEST #: LPB22W35D40/F-USTEST LAB: LUCECOTEST DATE: 2015??10??24??DESCRIPTION: �

LAMP OUTPUT: 1 LAMP, RATED LUMENS/LAMP: 3650.2INPUT WATTAGE: 31.7LUMINOUS OPENING: POINTMAX CD: 1,306.1 AT HORIZONTAL: 0°, VERTICAL: 5°CUTOFF CLASS: CUTOFFROADWAY CLASS: TYPE VSEFFICIENCY: 99.9%

VISUAL PHOTOMETRIC TOOL 1.2.46 COPYRIGHT 2017, ACUITY BRANDS LIGHTING.THIS PHOTOMETRIC REPORT HAS BEEN GENERATED USING METHODS RECOMMENDED BY THE IESNA. CALCULATIONS ARE BASED ONPHOTOMETRIC DATA PROVIDED BY THE MANUFACTURER, AND THE ACCURACY OF THIS PHOTOMETRIC REPORT IS DEPENDENT ON THEACCURACY OF THE DATA PROVIDED. END-USER ENVIRONMENT AND APPLICATION (INCLUDING, BUT NOT LIMITED TO, VOLTAGEVARIATION AND DIRT ACCUMULATION) CAN CAUSE ACTUAL PHOTOMETRIC PERFORMANCE TO DIFFER FROM THE PERFORMANCECALCULATED USING THE DATA PROVIDED BY THE MANUFACTURER. THIS REPORT IS PROVIDED WITHOUT WARRANTY AS TO ACCURACY,COMPLETENESS, RELIABILITY OR OTHERWISE. IN NO EVENT WILL ACUITY BRANDS LIGHTING BE RESPONSIBLE FOR ANY LOSSRESULTING FROM ANY USE OF THIS REPORT.

LPB22W35D40/F-USVISUAL PHOTOMETRIC TOOL PAGE 1 OF 4

2’ x 2’ 1’ x 4’ 2’ x 4’

LE

DIMENSIONS

603m

m/1

.98f

t

1211.83mm/4ft

60.2

mm

/2.

37in

60.2

mm

/2.

37in

95.5mm

/ 3.76in

95.5mm

/ 3.76in

603m

m/1

.98f

t

603mm/2ft2’ X 2’ 2’ X 4’

60.2

mm

/2.

37in

95.5mm

/ 3.76in

297.

94m

m/1

ft

1211.83mm/4ft1’ X 4’

RoHS Complies with restriction of the use of certain hazardous substances

UL Luminaires, light-emitting-diode

DLCDesign Lights Consortium listed high-performance, energy-efficient luminaires

LM-79 IESNA method for the electrical and photometric measurements of LED light products

LM-80 IESNA method for measuring lumen maintenance of LED light sources

TM-21 IESNA method for projecting the lumen maintenance of LED light products

STANDARDS

5WARRANTY

year limited

5/15/2017 LPB24W70D40/F-US

http://www.visual-3d.com/tools/photometricViewer/default.aspx?sessionid=682094

OUTDOOR PHOTOMETRIC REPORTCATALOG: LPB24W70D40/F-US

MANUFACTURER:TEST #: LPB24W70D40/F-USTEST LAB: LUCECOTEST DATE: 2015??10??24??DESCRIPTION: �

LAMP OUTPUT: 1 LAMP, RATED LUMENS/LAMP: 6778.5INPUT WATTAGE: 60.5LUMINOUS OPENING: POINTMAX CD: 2,373.3 AT HORIZONTAL: 0°, VERTICAL: 5°CUTOFF CLASS: CUTOFFROADWAY CLASS: TYPE VSEFFICIENCY: 99.9%

VISUAL PHOTOMETRIC TOOL 1.2.46 COPYRIGHT 2017, ACUITY BRANDS LIGHTING.THIS PHOTOMETRIC REPORT HAS BEEN GENERATED USING METHODS RECOMMENDEDPHOTOMETRIC DATA PROVIDED BY THE MANUFACTURER, AND THE ACCURACY OF THISACCURACY OF THE DATA PROVIDED. END-USER ENVIRONMENT AND APPLICATION (INCLUDING,VARIATION AND DIRT ACCUMULATION) CAN CAUSE ACTUAL PHOTOMETRIC PERFORMANCECALCULATED USING THE DATA PROVIDED BY THE MANUFACTURER. THIS REPORT ISCOMPLETENESS, RELIABILITY OR OTHERWISE. IN NO EVENT WILL ACUITY BRANDS LIGHTINGRESULTING FROM ANY USE OF THIS REPORT.

LPB24W70D40/F-USVISUAL PHOTOMETRIC TOOL

5/15/2017 LPB22W35D40/F-US

http://www.visual-3d.com/tools/photometricViewer/default.aspx?sessionid=226551 1/4

OUTDOOR PHOTOMETRIC REPORTCATALOG: LPB22W35D40/F-US

MANUFACTURER:TEST #: LPB22W35D40/F-USTEST LAB: LUCECOTEST DATE: 2015??10??24??DESCRIPTION: �

LAMP OUTPUT: 1 LAMP, RATED LUMENS/LAMP: 3650.2INPUT WATTAGE: 31.7LUMINOUS OPENING: POINTMAX CD: 1,306.1 AT HORIZONTAL: 0°, VERTICAL: 5°CUTOFF CLASS: CUTOFFROADWAY CLASS: TYPE VSEFFICIENCY: 99.9%

VISUAL PHOTOMETRIC TOOL 1.2.46 COPYRIGHT 2017, ACUITY BRANDS LIGHTING.THIS PHOTOMETRIC REPORT HAS BEEN GENERATED USING METHODS RECOMMENDED BY THE IESNA. CALCULATIONS ARE BASED ONPHOTOMETRIC DATA PROVIDED BY THE MANUFACTURER, AND THE ACCURACY OF THIS PHOTOMETRIC REPORT IS DEPENDENT ON THEACCURACY OF THE DATA PROVIDED. END-USER ENVIRONMENT AND APPLICATION (INCLUDING, BUT NOT LIMITED TO, VOLTAGEVARIATION AND DIRT ACCUMULATION) CAN CAUSE ACTUAL PHOTOMETRIC PERFORMANCE TO DIFFER FROM THE PERFORMANCECALCULATED USING THE DATA PROVIDED BY THE MANUFACTURER. THIS REPORT IS PROVIDED WITHOUT WARRANTY AS TO ACCURACY,COMPLETENESS, RELIABILITY OR OTHERWISE. IN NO EVENT WILL ACUITY BRANDS LIGHTING BE RESPONSIBLE FOR ANY LOSSRESULTING FROM ANY USE OF THIS REPORT.

LPB22W35D40/F-USVISUAL PHOTOMETRIC TOOL PAGE 1 OF 4

For a full and accurate list of current DLC products, please visit the DLC Qualified Products List

US Help line - 1 800 645-6460p - 281 978-2509

e -

Visit our website at

www.luceco.com

Luceco Inc

3010 Claymoore Park Dr Houston, TX 77043

TECHNICAL DATA

Luceco is a registered trademark of Luceco plcLPB US JH.12122017

ATTRIBUTES

LE

3500K

MODEL NUMBER LUMENS WATTAGEEFFICACY

lm/W

LPB14W35 3500 26W 135

LPBP14W35 3500 26W 135

LPB22W35 3500 33W 106

LPBP22W35 3500 26W 135

LPB24W70 7000 63W 111

LPBP24W70 7200 51W 141

4000K

MODEL NUMBER LUMENS WATTAGEEFFICACY

lm/W

LPB14W35 3500 26W 135

LPBP14W35 3500 26W 135

LPB22W35 3500 33W 106

LPBP22W35 3500 26W 135

LPB24W70 7000 63W 111

LPBP24W70 7200 51W 141

DLC qualified product. Please check the DLC Qualified Products List at www. designlights.org to verify your specific product needs.

1/4

RECOMMENDED BY THE IESNA. CALCULATIONS ARE BASED ONPHOTOMETRIC REPORT IS DEPENDENT ON THE

(INCLUDING, BUT NOT LIMITED TO, VOLTAGEPERFORMANCE TO DIFFER FROM THE PERFORMANCE

PROVIDED WITHOUT WARRANTY AS TO ACCURACY,LIGHTING BE RESPONSIBLE FOR ANY LOSS

PAGE 1 OF 4

US Help line - 1 800 645-6460p - 281 978-2509

e -

Visit our website at

www.luceco.com

Luceco Inc

3010 Claymoore Park Dr Houston, TX 77043