Upload
sawyer
View
20
Download
0
Embed Size (px)
DESCRIPTION
Technical Market Access and Quality Infrastructure Part 4: Standardization and Innovation Beijing Quality Partnerships LLC Klaus Ziegler, Legal Representative ESEUNE Business School, 23 September 2013. How to Commercialize Innovation Results?. There are two basic avenues: - PowerPoint PPT Presentation
Citation preview
www.quality-partnerships.cn
Technical Market Access and Quality Infrastructure
Part 4: Standardization and Innovation
Beijing Quality Partnerships LLCKlaus Ziegler, Legal Representative
ESEUNE Business School, 23 September 2013
1
www.quality-partnerships.cn
How to Commercialize Innovation Results?
• There are two basic avenues:– Privatize the technology and use it closed circles via licensing– Publicize the technology and thus creating an environment where
the innovation is broadly used• Registering IP’s (Intellectual Property) in all relevant markets
including China is of strategic relevance– Different IP regimes in different markets (e.g. first come – first serve
in China)• Standards are an effective way for generating adaptors of the
new technology:– Ideally the standards contain technologies for which the
organization holds IP’s…– Condition: Willingness to license under FRAND conditions (Fair,
Reasonable, and Non-Discriminatory)2
www.quality-partnerships.cn
3
Standardization versus Innovation
Standardization strives for predictability and a level playing field; standardization is a public good
Innovation strives for excellence and exclusivity
How to combine these two?• Standards for interoperability open new markets and
competition• Measurement standards allow for differentiation and
benchmarking• Standards for safety, quality, and environmental
performance allow innovators to follow market expectations or to exceed them
• Standards for management and processes support innovation within an organization
www.quality-partnerships.cn
4
EU: Standardization Enables Innovation…
• And fosters economic growth by:– Creating more competition and level playing field– Providing equal access to innovation– Ensuring interoperability of new technologies– Fostering competitiveness of EU Industry
• And helps companies to differentiate through:– Knowledge transfer– Cost and risk reduction– Faster time to market
• And creates a strategic advantage in global markets:– First mover of new technology– Market for innovative companies and talents
www.quality-partnerships.cn
5
Chinese Standardization Policy
1. Compulsory standards are the legal basis to ensure product safety, occupational health, and sound environmental behavior of products and production processes (used in “pre-market” and “post-market surveillance)
2. Standardization is a tool to disseminate scientific experience and accelerate technical innovation (“leapfrog technologies”)
3. Standardization is a tool to develop a strong domestic knowledge base and a related industry (“home-grown standards”)
4. Standardization shall support domestic R&D and the development of products based on Chinese IPR (“indigenous innovation”)
5. National safety and security interests shall be reflected in the standardization system (e.g. “Infosec” standards)
6. Export of Chinese standards shall support Chinese trade policies
www.quality-partnerships.cn
6
Focus on Innovation Aspect of Standardization…
Requires:
• Better understanding of standardization work in government and industry– Access to standardization for SME– Clear positioning within government
• Better integration of standardization in R&D work– Dissemination of new technologies– Achieving critical mass of participants
• Reform and adaptation of standardization– New challenges: globalization, new economic powers, technology
evolution, technology convergence
www.quality-partnerships.cn
7
Standardization and Technology Transfer
• Consensual Technology Transfer– Standardization reflects “Best Practice”, allowing industry to
integrate R&D and management experiences– IPs locked into standards are generally based on the
“FRAND” principle, and thus publicly available against fee
• Forced or Induced Technology Transfer– Access to Standard Development Organizations in exchange
for technical contribution, often including technology disclosure and know-how transfer
– Performance standards as basis for market access
www.quality-partnerships.cn
8
Policies (made by SDOs) CCSA CESI AVS ……
National Standard (Detailed Rules)
Disposal Rules for the Inclusion of Patents in National Standards
Departmental RegulationsInterim Provisions (AQSIQ or SAC)
Law
Patent law Standardization law
Anti-monopoly law
IPR in Standards – Legal Framework in China
www.quality-partnerships.cn
9
The ETSI IPR Policy: an Overview
• ETSI IPR Policy is fully aligned with policies of ISO/IEC/ITU-T• IPR owners are entitled exercise their rights and to benefit from
their IPR’s; this includes the right to refuse the granting of licenses• Standards are based on solutions which best meet the technical
objectives of ETSI; this might include the use of IPR’s • ETSI is seeking a balance between the needs of standardization
for public use in the field of telecommunications, and the rights of the owners of IPR’s
• ETSI is trying to reduce the risk of wasting investment in preparation, adoption and application of standards, due to an essential IPR which is and remains unavailable
• Information about existence of essential IPRs shall be obtained as early as possible
• Licensing negotiations are commercial issues between the companies involved and are to be addressed outside ETSI (!!)
www.quality-partnerships.cn
Technical Market Access and Quality Infrastructure
Part 5: Impact on Companies and Supply Chains
Beijing Quality Partnerships LLCKlaus Ziegler, Legal Representative
ESEUNE Business School, 23 September 2013
10
www.quality-partnerships.cn
Certification Schemes – and their Impact
• Compulsory certifications / licenses / marks / labels; defined in the respective legislation e.g. for:– Product and production safety, e.g. CCC in China– Environmental soundness, e.g. EU building energy certificates– National security interests, e.g. OSCCA for cryptography
• Voluntary certifications / marks / labels / approvals– Public / government owned labels, e.g.: Eco-labels and Energy-labels, US
Energy Star– Private labels, e.g.: Kitemark, VDE-Mark, Lead-Certificate– Non-public private systems, especially for procurement
• Types of assessment modules– Self-declaration– Second party assessment in supply chains– 3rd party assessment –independent certification / inspection / testing body– Witnessed self-assessment (a mixed form)
Question for better understanding: Is the CE-Mark a compulsory label?11
www.quality-partnerships.cn
Legal Impact of Voluntary Standards
• Contract Legislation– Standard defines how a product or service should look like– Used as reference by experts
• Product Liability Legislation– Standard reflects technical knowledge at the date of issuance– Non-compliance might lead to assumption of negligence
• Product Safety Legislation– Standards describe how the essential and/or detailed requirements for safe
products can be met– Harmonization use of standard leads to presumption of conformity– Compulsory Standards use of standard is a legal requirement
• Product Safety Directives and Regulations in EU– New Legislative Framework (NLF) / New Approach: CE Marking combined
conformity assessment requirement
12
www.quality-partnerships.cn
Global Supply Chain Challenges
13Source: Kinaxis
Business complexity in sourcing, manufacturing, distribution Different products are manufactured in different geographies with
varying capabilities Broad range of products for different markets
www.quality-partnerships.cn
14
Impact of CCC on Supply Chains
Design/Technical specifications Chinese standards are not always identical with international / European
standards, this might require changes in design and configuration Chinese regulations will affect the selection and design of components: small
changes can lead to massive increase / decrease in certification requirements Additional testing and production controls might be required, even if not needed
for the planned supply chain
Timing Approbation and Homologation in China is often more complicated and time
consuming than in other markets – and not always predictable Legal obstacles might end in time-consuming remedy actions: Import of samples,
definition of origin and manufacturer
Cost For small series cost of certification and testing can be prohibitive: spare parts (!) Cost considerations might also lead to a reduction of modifications and number of
alternative components
www.quality-partnerships.cn
SME – How to help yourself:
• Understand basics of the standardization system of the markets you are exporting to, especially the difference between compulsory and voluntary standards
• Identify the industry association in charge for your business sector and get to know the key people
• Identify the organization in charge for developing standards in your business (in developing markets often a research institute or an industry association)
• Identify the testing labs in charge for type approval in your business; get familiar with their operating processes
• Understand the key players for voluntary and compulsory certification schemes applicable for your business
• Get organized: It is always easier to work within an industry association; participate in the local Business Chambers
• Use respectable freely available knowledge bases, on internet and otherwise; however be careful about the reliability of information
15
www.quality-partnerships.cn
Technical Market Access and Quality Infrastructure
Part 6: Homologation in Practice
Beijing Quality Partnerships LLCKlaus Ziegler, Legal Representative
ESEUNE Business School, 23 September 2013
16
www.quality-partnerships.cn
EU – Principles of Homologation
• The system in the EU finds its origin in removing all barriers to trade to create a single market
• Placing a product on the market of a single Member State is placing a product on the common EU Market
• Creating a single market requires a single legislation:– Directives (to be incorporated in the national legislative
system of each Member State) and– Regulations (immediate applicability) addressed to
manufacturers• EU Directives and Regulations are superior to
national Member State legislation17
www.quality-partnerships.cn
Concept of Homologation in Europe
Basic principles of the Sectoral Directives/Regulations:• The conformity assessment measures are based on the
perceived risks associated with the product / production processes; whilst the default setting is: Self-Control by manufacturer (or any person taking over his responsibility)
• The manufacturer is always responsible for placing a product on the EU market in conformance with the relevant Directives/Regulations
• Depending on the requirements of the relevant Directives/Regulations the manufacturer is obliged to– affix the conformity mark to his product– draw up the declaration of conformity– provide the necessary information for safe use– seek intervention of a third party
18
www.quality-partnerships.cn
EU – New Approach / NLF: Basic Modules
19Source: EU Guide to New Approach
www.quality-partnerships.cn
Flow Chart of Conformity Assessment Procedures
20Source: EU Guide to New Approach
www.quality-partnerships.cn
The Chinese CCC System of Market Access
Background CCC is mandatory for 23 categories of products CCC is mandatory for domestically produced or imported products! CCC shows the conformity of a product to the safety requirements and
environmental performance set by laws and regulations Implemented since 2003, established to comply with WTO/TBT
requirements Certificates valid now for 5 years
What is the CCC mark?
According to the class of products (23 categories), different CCC marks available, e.g. safety, EMC, etc.
CCC mark has to be labelled either on the product, the packaging or both21
www.quality-partnerships.cn
CCC – Institutions and Benefits
Institutions involved Certification and Accreditation bodies: AQSIQ, CNCA Certification bodies: 10 Accredited laboratories: approx. 160
What are the benefits? Consumer recognition CCC is THE official license Elimination of substandard products and processes Better protection of Intellectual Property (?)
22
www.quality-partnerships.cn
Can CCC be avoided?
For products in the CCC catalogue the basic answer is: No
Exemptions:• Products not included in the scope of the underlying standards• Components built into products (tested during main process)• CCC Exemptions (very few and not guaranteed!)• Products made exclusively for export• Trans-shipments using bonded warehouses
Special attention is required for:• Alternative components• Future spare parts
23
www.quality-partnerships.cn
Case study 1: Components and CCC (1)
24
CCC Rules Location Customs
Applicant
Manufacturer
Factory
Most Value Added?
Country ofOrigin?
“Made in?”Motor Brak
e
SK IFactory 1 Factory 2
Value > 50%
CCCApplicantCH
ResponsibilityCH
ComponentMotor Brak
eFactory 3
CH
www.quality-partnerships.cn
25
A real situation we are currently facing:
Motor manufactured in Slovakia Brakes added in Switzerland
Machinery assembled in China Machinery may be exported to US
Common sense would say that first and foremost regulations and standards for products and installation in the USA will define product design, but…
Motor represents > 70% to value of the component, then Country of Origin for Customs ≠ Manufacturer for CCC
Small components with motors require CCC in China (also with brakes)
Detailed requirements testing & production control in CH
Motors must comply with energy performance regulations (MEPS), but
MEPS (EU) ≠ MEPS (CH) ≠ MEPS (CN) ≠ MEPS (US)…
Case study 1: Components and CCC (2)
Components
www.quality-partnerships.cn
Case Study 2: Standard update
26
Update of GB
standard
01/2010 01/2011
On the CCC certificate the relevant GB standards are noted!
03/2011
Upgrade possible
CCC still fully valid
CCC suspended
Upgrade process has to be completed
CCC deleted6 months ban to re-apply
CCC Factory No. cancelled
09/2011
New CCC application
New testingNew initial factory inspection might be required
www.quality-partnerships.cn
Some basic tricks of the trade
27
•Chinese certification systems are generally not linked to HS-classifications: The applicability of certification schemes is in general determined by the scope of the underlying standards; such examination is expert work and requires lots of experience
•China has many more standards than Europe – so be warned: there might be compulsory standards around which do not exist anywhere else. A good source for identification of standard is the platform www.eu-standards.eu
•All standards in China undergo a five-yearly review. It is quite likely that underlying standards are changed during the validity of a compulsory market access license. In case the standard changes you must “upgrade” the respective license within set time limits (in general less than one year)
•Exemptions from compulsory license schemes do exist: However do not assume that you will be granted an exemption – unless you have very good reasons to believe this
•All licensing schemes are based primarily on a “watertight” documentation. This is more important than type testing and inspection; the related work should not be underestimated
•Once your goods get stuck at customs it is in general too late to apply for the required licenses – unless you can afford to have your goods waiting for months in bonded warehouses… So get your paperwork right before even considering to ship goods to China!
www.quality-partnerships.cn
Beijing Quality Partnerships LLCSuite 1510, Zhongyu Plaza,
A6 Gongti Beilu, Chaoyang District, Beijing 100027Tel +86 (10) 8523 6268Fax +86 (10) 8523 6238
www.quality-partnerships.cn
Klaus ZieglerPresident
[email protected] Mobile +86 139 1091 0826
For any further information, feel free to contact:
28