Technical Report No.60.160.12.1 4004 .03(R1) Dated 2013 -0 ...Technical Report No.60.160.12.1 4004 .03(R1) Dated 2013 -0 2 -04 1. Order 1.1 Customer's Reference Nil 1.2 Receipt Date

Note: No extract, abridgment or abstraction from a test report may be published or used to advertise a product without the written consent of the Director of TÜV SÜD Hong Kong Ltd. The results

contained herein apply only to the particular sample tested and to the specific test carried out and not to samples of the current production line.

TÜV SÜD Hong Kong

18/F & 19/F, Yuen Long Trading Centre,

33 Wang Yip Street West,

Yuen Long, New Territories, Hong Kong

Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 1 of 34

Technical Report No.60.160.12.14004.03(R1)

Dated 2013-02-04

Applicant: BABY SOLUTIONS SA Via Magazzini Generali 10 Test Subject:

Good Night! Sleeping Bag Good Night! Sleeping Bag 90cm

Style No.: 60001.00, 60002.00

Purpose of examination: (1) Flammability test of sleeping bags

Test with reference to ASTM F1955-1999

(2) Test with reference to EN 71 - 3 : 1994 with amendment A1:2000 / AC: 2002 - Migration of certain elements

As stated in the above specifications. Heavy metal analysis was determined by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES)

(3) Azo-Dye Test

Regulation (EC) No. 1907/2006, Annex XVII, Entry 43 and its amendment Regulation (EC) No. 552/2009 (Formerly restricted under 2002/61/EC & 2004/21/EC) Test in accordance with EN 14362-1:2012 (for textiles) or ISO 17234-1:2010 (for leather). The presence of 4-aminoazobenzene is determined by EN 14362-3:2012 or ISO 17234-2:2011. [Reporting Limit = 5.0mg/kg]

(4) Carcinogenic and Allergenous Disperse Dye

Test with reference to DIN 54231:2005, LC-MS-MS analysis [Reporting Limit = 0.50 mg/L in extract, 7.50 mg/kg in sample]

(5) Colour Fastness to Saliva and Perspiration

§64 LFGB B 82. 10 – 1 : 1985 – 06

(6) Nickel Release Test

Entry 27 of Regulation (EC) No. 552/2009 amending Annex XVII of REACH Regulation (EC) No. 1907 / 2006 (Formerly restricted under Directive 94/27/EEC) Test according to EN 12472:2005+A1:2009 and EN 1811:2011 [Reporting Limit = 0.05 μg/cm2/week]

(7) Organotin Compounds Content Test (Tributyltin TBT/ Dioctyltin DOT/Di-n-butyltin DBT/Triphenyltin TPhT)

In house method test with reference to DIN EN ISO 17353:2005, solvent extraction with acidified methanol, followed by derivatization

and GC-MS analysis [Reporting Limit = 0.025 mg/kg]

(8) Polycyclic Aromatic Hydrocarbons (PAH) Content Test

Extraction method with reference to ZEK 01.4-08 and followed by GC-MS analysis [Reporting Limit = 0.10 mg/kg]

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 2 of 34


Dated 2013-02-04

(9) Regulated Phthalates Test

Consumer Product Safety Improvement Act of 2008 (Section 108) CPSC-CH-C1001-09.3 – Standard Operating Procedure for Determination of Phthalates [Reporting Limit = 0.005 %]

(10) Regulated Phthalates Test

Regulation (EC) No.1907/2006 and its amendment Regulation (EC) No. 552/2009 (REACH) Annex XVII, Entry 51 and 52 Solvent extraction by chloroform and GC-MS analysis. [Reporting Limit = 0.005 %]

(11) Total Lead Content Test

Consumer Product Safety Improvement Act of 2008 (Section 101) Test in accordance with CPSC-CH-E1002-08 (Non-Metallic components), CPSC-CH-E1001-08.1 (Metallic components

Including Children's Metal Jewelry) [Reporting Limit = 10.0 mg/kg]

(12) Total Cadmium Content Test

Regulation (EC) No.1907/2006 (REACH) and its amendment Regulation (EU) No. 494/2011, Annex XVII, Entry 23 EN 1122:2001 and followed by Atomic Absorption Spectrophotometer (AAS) or Inductively Coupled Plasma Optical Emission Spectrophotometer (ICP-OES) [Reporting Limit = 2.0 mg/kg]

(13) Formaldehyde Content Test

Client‟s specification test according to DIN EN ISO 14184-1:2011, Formaldehyde content determined by UV-Visible spectroscopy [Reporting Limit = 16mg/kg]

(14) Pentachlorophenol (PCP) and Sum of Tetrachlorophenols

(TeCP) Content Test

Client‟s specification test with reference to DIN EN ISO 17070: 2006, followed by GC-ECD/GC-MSD analysis [Reporting Limit = 0.05 mg/kg]

(15) Flame Retardants Test

In house method test with reference to US EPA 3550C:2007, extraction

with organic solvent and analyzed by GC-MS [Reporting Limit = 100 mg/kg for SCCP, 5 mg/kg for others]

(16) Analysis of the 84 substances of very high concern (SVHC) on the

Candidate List for authorization, concerning Regulation (EC) No. 1907/2006 as published on the European Chemicals Agency (ECHA) website in October 2008, January 2010, March 2010, June 2010, December 2010, June 2011, December 2011 and June 2012 Analysis based on LCMS, GCMS, Headspace-GCMS, ICP-OES/AAS, UV-VIS and XRF.

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 3 of 34


Dated 2013-02-04

Test result: Refer to section 3

Conclusion:

(1) The submitted samples complied with the performance requirements of ASTM F1955-1999

(2) EN 71 - 3 : 1994 with amendment A1:2000 / AC: 2002 Migration of certain elements

Pass

(3) Azo-Dye Test Pass

(4) Carcinogenic and Allergenous Disperse Dye Pass

(5) Colour Fastness to Saliva and Perspiration Pass*

(6) Nickel Release Test Pass

(7) Organotin Compounds Content Test (Tributyltin TBT/ Dioctyltin DOT/Di-n-butyltin DBT/Triphenyltin TPhT)

Pass*

(8) Polycyclic Aromatic Hydrocarbons (PAH) Content Test

Pass

(9) Regulated Phthalates Test Pass

(10) Regulated Phthalates Test Pass

(11) Total Lead Content Test Pass

(12) Total Cadmium Content Test Pass

(13) Formaldehyde Content Test Pass*

(14) Pentachlorophenol (PCP), Sum of Tetrachlorophenols (TeCP) Content Test

Pass*

(15) Flame Retardants Test Pass*

(16) According to the specified scope and analytical techniques, the concentration of each of the 84 SVHC is <0.1% (w/w) in the submitted sample(s).

Remarks (1) The results relate only to the items tested. (2) Samples are tested as received.

(3) “*” denotes conclusion was drawn according to client‟s specification.

(4) This report supersedes technical report no. 60.160.12.14004.03

issued on 2013-01-30.

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 4 of 34


Dated 2013-02-04

1. Order

1.1 Customer's Reference

Nil

1.2 Receipt Date of Test Sample, Location

Received on 2012-10-03, 2012-12-31 and 2013-01-17, Hong Kong

1.3 Date of Testing, Location

From 2012-10-03 to 2012-12-12 and 2012-12-31 to 2013-01-07 and 2013-01-17 to 2013-01-18, Hong Kong

1.4 Document submitted

Nil

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 5 of 34


Dated 2013-02-04

2. Description of the test subject

Sample No.

Color and Description

Photograph

001 White fabric (main fabric of snail sleep bag)

002 Green fabric (snail sleep bag)

003 Dark pink fabric (snail sleep bag)

004 Purple fabric (ribbon of snail sleep bag)

005 Blue pile fabric (snail)

006 Orange pile fabric with orange/ dark pink thread (snail)

007 Dark purple pile fabric with multicolor thread (snail)

008 Green fabric with white/ blue/ pink thread (logo on sleep bag)

009 White fabric (zipper's cloth)

010 White fabric (lining of sleep bag)

011 White plastic (button)

012 White plastic (zipper's teeth)

013 White coating (zipper's head)

014 Silvery metal with white coating (zipper's head)

015 Silvery metal (button)

016 White fabric with dark pink dot print (main fabric of owl sleep bag)

017 Purple red fabric (owl sleep bag)

018 Blue fabric (owl sleep bag)

019 Light green fabric (ribbon of owl sleep bag)

020 Dark purple pile fabric with multicolor thread (owl)

021 Dark pink pile fabric with blue/ green thread (owl)

022 Orange pile fabric with orange thread (owl)

023 Light brown pile fabric with light brown thread (owl)

024 White plastic (inside sponge)

025 Owl sleep bag

026 Snail sleep bag

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 6 of 34


Dated 2013-02-04

3. Test Results

3.1 Flammability test of sleeping bags


Conditioning: The sample was conditioned at 21±1°C, 65±2% R.H. for at least 6 hours before testing. Laundering Procedure: In accordance with AATCC135; (I)(II)D, normal cycle, machine wash at 30 deg C in 1993 AATCC

Standard Reference Detergent and flat dry, 3 cycles. Results: Sample 025 (Owl pattern with ribbon and filling)

Before laundering

Specimen(s) Time for the flame to travel in 10 inch (seconds) Burn rate (inch/min)

1 588.8 1.0

2 299.7 2.0

3 372.5 1.6

4 302.6 2.0

5 392.9 1.5

Average burn rate: 1.6 inch/min

Comment: Pass

After laundering


1 345.0 1.7

2 355.6 1.7

3 251.2 2.4

4 270.3 2.2

5 300.5 2.0


Comment: Pass

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 7 of 34


Dated 2013-02-04



Results: Sample 025 (woven fabric with filling)

Before laundering


1 373.4 1.6

2 370.8 1.6

3 444.8 1.3

4 371.6 1.6

5 412.0 1.5


Comment: Pass

After laundering


1 305.3 2.0

2 307.7 1.9

3 265.0 2.3

4 268.2 2.2

5 248.7 2.4


Comment: Pass

Results: Sample 026 (Snail pattern with ribbon and filling)

Before laundering


1 384.1 1.6

2 581.4 1.0

3 394.9 1.5

4 504.1 1.2

5 538.3 1.1


Comment: Pass

After laundering


1 376.7 1.6

2 375.9 1.6

3 295.0 2.0

4 520.6 1.2

5 450.3 1.3


Comment: Pass

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 8 of 34


Dated 2013-02-04



Results: Sample 026 (woven fabric with filling)

Before laundering


1 324.1 1.9

2 277.0 2.2

3 249.2 2.4

4 251.1 2.4

5 260.9 2.3


Comment: Pass

After laundering


1 274.2 2.2

2 237.2 2.5

3 215.6 2.8

4 226.7 2.6

5 208.1 2.9


Comment: Pass

Performance requirements: The average burn rate shall not exceed 6 inch/min. (15 cm/min.). No individual specimen shall have a burn rate of more than 8 inch (20 cm).

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 9 of 34


Dated 2013-02-04

3.2 Test with reference to EN 71 - 3 : 1994 with amendment A1:2000 / AC: 2002 – Migration of

certain element

As stated in the above specifications. Heavy metal analysis was determined by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES).

Elements

Result [mg/kg]

Sample 001

Sample 002

Sample 003

Sample 004

Maximally Permissible

Limits [mg/kg]

Soluble Antimony <5.0 <5.0 <5.0 <5.0 60

Soluble Arsenic <2.5 <2.5 <2.5 <2.5 25

Soluble Barium <5.0 <5.0 <5.0 <5.0 1000

Soluble Cadmium <5.0 <5.0 <5.0 <5.0 75

Soluble Chromium <5.0 <5.0 <5.0 <5.0 60

Soluble Lead <5.0 <5.0 <5.0 <5.0 90

Soluble Mercury <5.0 <5.0 <5.0 <5.0 60

Soluble Selenium <5.0 <5.0 <5.0 <5.0 500 Conclusion Pass Pass Pass Pass

Elements

Result [mg/kg]

Sample 005

Sample 006

Sample 007

Sample 008


Limits [mg/kg]


Soluble Arsenic <2.5 <2.5 <2.5 <2.5 25

Soluble Barium <5.0 <5.0 <5.0 <5.0 1000

Soluble Cadmium <5.0 <5.0 <5.0 <5.0 75


Soluble Lead <5.0 <5.0 <5.0 <5.0 90

Soluble Mercury <5.0 <5.0 <5.0 <5.0 60

Soluble Selenium <5.0 <5.0 <5.0 <5.0 500

Conclusion Pass Pass Pass Pass

Note: 1. mg/kg denotes milligram per kilogram 2. < denotes less than

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 10 of 34


Dated 2013-02-04


certain element As stated in the above specifications. Heavy metal analysis was determined by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES).

Elements

Result [mg/kg]

Sample 009

Sample 010

Sample 011

Sample 012


Limits [mg/kg]


Soluble Arsenic <2.5 <2.5 <2.5 <2.5 25

Soluble Barium <5.0 <5.0 <5.0 <5.0 1000

Soluble Cadmium <5.0 <5.0 <5.0 <5.0 75


Soluble Lead <5.0 <5.0 <5.0 <5.0 90

Soluble Mercury <5.0 <5.0 <5.0 <5.0 60



Elements

Result [mg/kg]

Sample 013

Sample 016

Sample 017

Sample 018


Limits [mg/kg]


Soluble Arsenic <2.5 <2.5 <2.5 <2.5 25

Soluble Barium <5.0 <5.0 <5.0 <5.0 1000

Soluble Cadmium <5.0 <5.0 <5.0 <5.0 75


Soluble Lead <5.0 <5.0 <5.0 <5.0 90

Soluble Mercury <5.0 <5.0 <5.0 <5.0 60



Note: 1. mg/kg denotes milligram per kilogram 2. < denotes less than Remark: The surface coating samples with sample weight less than 100 mg, were assumed to be 100

mg in calculation. Actual weight of sample (s)used for analysis which are less than 100 mg.

Sample 013 = 12.1 mg

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 11 of 34


Dated 2013-02-04


certain element

As stated in the above specifications. Heavy metal analysis was determined by Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES).

Elements

Result [mg/kg]

Sample 019

Sample 020

Sample 021

Sample 022


Limits [mg/kg]


Soluble Arsenic <2.5 <2.5 <2.5 <2.5 25

Soluble Barium <5.0 <5.0 <5.0 <5.0 1000

Soluble Cadmium <5.0 <5.0 <5.0 <5.0 75


Soluble Lead <5.0 <5.0 <5.0 <5.0 90

Soluble Mercury <5.0 <5.0 <5.0 <5.0 60

Soluble Selenium <5.0 <5.0 <5.0 <5.0 500 Conclusion Pass Pass Pass Pass

Elements

Result [mg/kg]

Sample 023


Limits [mg/kg]

Soluble Antimony <5.0 60

Soluble Arsenic <2.5 25

Soluble Barium <5.0 1000

Soluble Cadmium <5.0 75

Soluble Chromium <5.0 60

Soluble Lead <5.0 90

Soluble Mercury <5.0 60

Soluble Selenium <5.0 500

Conclusion Pass

Note: 1. mg/kg denotes milligram per kilogram 2. < denotes less than

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 12 of 34


Dated 2013-02-04

3.3 Azo-Dye Test Regulation (EC) No. 1907/2006, Annex XVII, Entry 43 and its amendment Regulation (EC) No. 552/2009

(Formerly restricted under 2002/61/EC & 2004/21/EC) Test in accordance with EN 14362-1:2012 (for textiles) or ISO 17234-1:2010 (for leather). The presence of 4-aminoazobenzene is determined by EN 14362-3:2012 or ISO 17234-2:2011. [Reporting Limit = 5.0mg/kg]

List of Aromatic Amines

Forbidden Amine

Results [mg/kg] 002+003+004 005+017 006

01 4-aminobiphenyl <5.0 <5.0 <5.0 02 Benzidine <5.0 <5.0 <5.0 03 4-chloro-o-toluidine <5.0 <5.0 <5.0 04 2-naphthylamine <5.0 <5.0 <5.0 05 o-aminoazotoluene <5.0 <5.0 <5.0 06 5-nitro-o-toluidine <5.0 <5.0 <5.0 07 4-chloroaniline <5.0 <5.0 <5.0 08 2,4-diaminoanisole <5.0 <5.0 <5.0 09 4,4'-diaminodiphenylmethane <5.0 <5.0 <5.0 10 3,3'-dichlorobenzidine <5.0 <5.0 <5.0 11 3,3'-dimethoxybenzidine <5.0 <5.0 <5.0 12 3,3'-dimethylbenzidine <5.0 <5.0 <5.0 13 4,4'-methylenedi-o-toluidine <5.0 <5.0 <5.0 14 p-cresidine <5.0 <5.0 <5.0 15 4,4'-methylene-bis-(2-chloro-aniline) <5.0 <5.0 <5.0 16 4,4'-oxydianiline <5.0 <5.0 <5.0 17 4,4'-thiodianiline <5.0 <5.0 <5.0 18 o-toluidine <5.0 <5.0 <5.0 19 2,4-toluenediamine <5.0 <5.0 <5.0 20 2,4,5-trimethylaniline <5.0 <5.0 <5.0 21 2-methoxyaniline <5.0 <5.0 <5.0 22 2,4-xylidine

# <5.0 <5.0 <5.0 23 2,6-xylidine

# <5.0 <5.0 <5.0 24 4-aminoazobenzene* <5.0 <5.0 <5.0

Method EN14362-1:2012 EN14362-1:2012 EN14362-1:2012

Limit (Not applicable to composite testing) <30 <30 <30

Conclusion Pass Pass Pass

Note: 1. “#” denotes 2,4-xylidine and 2,6-xylidine are not under Regulation (EC) No.1907/2006 and they are for client‟s reference.

2. “<” denotes less than 3. “mg/kg” denotes milligram per kilogram

* Azo colorants that are able to form 4-aminoazobenzene, as generated under the current testing condition stated in EN 14362-1:2012 are aniline and 1,4-phenylenediamine. The presence of 4-aminoazobenzene is determined by EN 14362-3:2012 or ISO 17234-2:2011.

Interpretation of test results:

(1) In the case of the measured value per amine component ≤30 mg/kg and according to the analysis carried out, the azo colourants

banned under the Annex XVII of Regulation (EC) No. 1907/2006, REACH are not detected in the article submitted. (2) In the case of the measured value per amine component > 30 mg/kg, the analysis result suggests that the submitted article was

manufactured or treated with the azo colourants banned under Annex XVII of Regulation (EC) No. 1907/2006, REACH

(3) In the case of the measured value per amine component being between 25 and 35 mg/kg, it is remarked that due to the inherent uncertainty of the detection method, the value represent a border line case.

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 13 of 34


Dated 2013-02-04

3.3 Azo-Dye Test



Forbidden Amine

Results [mg/kg] 007 008 016


# <5.0 <5.0 <5.0 23 2,6-xylidine


Method EN14362-1:2012 EN14362-1:2012 EN14362-1:2012







(1) In the case of the measured value per amine component ≤30 mg/kg and according to the analysis carried out, the azo colourants banned under the Annex XVII of Regulation (EC) No. 1907/2006, REACH are not detected in the article submitted.

(2) In the case of the measured value per amine component > 30 mg/kg, the analysis result suggests that the submitted article was manufactured or treated with the azo colourants banned under Annex XVII of Regulation (EC) No. 1907/2006, REACH

(3) In the case of the measured value per amine component being between 25 and 35 mg/kg, it is remarked that due to the inherent

uncertainty of the detection method, the value represent a border line case.

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 14 of 34


Dated 2013-02-04

3.3 Azo-Dye Test



Forbidden Amine

Results [mg/kg] 018+019 020 021


# <5.0 <5.0 <5.0 23 2,6-xylidine


Method EN14362-1:2012 EN14362-1:2012 EN14362-1:2012











TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 15 of 34


Dated 2013-02-04

3.3 Azo-Dye Test



Forbidden Amine

Results [mg/kg] 022 023

01 4-aminobiphenyl <5.0 <5.0 02 Benzidine <5.0 <5.0 03 4-chloro-o-toluidine <5.0 <5.0 04 2-naphthylamine <5.0 <5.0 05 o-aminoazotoluene <5.0 <5.0 06 5-nitro-o-toluidine <5.0 <5.0 07 4-chloroaniline <5.0 <5.0 08 2,4-diaminoanisole <5.0 <5.0 09 4,4'-diaminodiphenylmethane <5.0 <5.0 10 3,3'-dichlorobenzidine <5.0 <5.0 11 3,3'-dimethoxybenzidine <5.0 <5.0 12 3,3'-dimethylbenzidine <5.0 <5.0 13 4,4'-methylenedi-o-toluidine <5.0 <5.0 14 p-cresidine <5.0 <5.0 15 4,4'-methylene-bis-(2-chloro-aniline) <5.0 <5.0 16 4,4'-oxydianiline <5.0 <5.0 17 4,4'-thiodianiline <5.0 <5.0 18 o-toluidine <5.0 <5.0 19 2,4-toluenediamine <5.0 <5.0 20 2,4,5-trimethylaniline <5.0 <5.0 21 2-methoxyaniline <5.0 <5.0 22 2,4-xylidine

# <5.0 <5.0 23 2,6-xylidine

# <5.0 <5.0 24 4-aminoazobenzene* <5.0 <5.0

Method EN14362-1:2012 EN14362-1:2012

Limit (Not applicable to composite testing) <30 <30

Conclusion Pass Pass









TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 16 of 34


Dated 2013-02-04

3.4 Carcinogenic and Allergenous Disperse Dye Test with reference to DIN 54231:2005, LC-MS-MS analysis

[Reporting Limit = 0.50 mg/L in extract, 7.50 mg/kg in sample]

Sample Result [mg/L]

Dye detected Client's specification Conclusion

001 N.D. -

Not Detected

Pass 002 N.D. - Pass 003 N.D. - Pass 004 N.D. - Pass 005 N.D. - Pass 006 N.D. - Pass 007 N.D. - Pass 008 N.D. - Pass 009 N.D. - Pass 010 N.D. - Pass 016 N.D. - Pass 017 N.D. - Pass 018 N.D. - Pass 019 N.D. - Pass 020 N.D. - Pass 021 N.D. - Pass 022 N.D. - Pass 023 N.D. - Pass

Note: 1. “<” denotes less than 2. “N.D.” denotes not detected

3. “mg/L” denotes milligram per litre

Tested Dyestuffs : Carcinogenic Dyestuffs: C.I. Acid Red 26, C.I. Basic Red 9, C.I. Basic Violet 14, C.I. Disperse Blue 1*, C.I. Disperse Yellow 3*, C.I. Direct Black 38, C.I. Direct Blue 6, C.I. Direct Red 28, C.I. Disperse Orange 11 Allergenous Dyestuffs: C.I. Disperse Blue 1*, C.I. Disperse Blue 3, C.I. Disperse Blue 7, C.I. Disperse Blue 26, C.I. Disperse Blue 35, C.I. Disperse Blue 102, C.I. Disperse Blue 106, C.I. Disperse Blue 124, C.I. Disperse Brown 1, C.I. Disperse Orange 1, C.I. Disperse Orange 3, C.I. Disperse Orange 37, C.I. Disperse Orange 76**, C.I. Disperse Red 1, C.I. Disperse Red 11, C.I. Disperse Red 17, C.I. Disperse Yellow 1, C.I. Disperse Yellow 3*, C.I. Disperse Yellow 9, C.I. Disperse Yellow 39, C.I. Disperse Yellow 49 C.I. Disperse Yellow 23, C.I. Disperse Orange 149 *: Both Allergenous and Carcinogenic; **: equivalent to C.I. Disperse Orange 37

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 17 of 34


Dated 2013-02-04

3.5 Colour Fastness to Saliva and Perspiration §64 LFGB B 82. 10 – 1 : 1985 - 06

Sample

Result (Grade) Client’s

specification Conclusion* Colour fastness to

saliva Colour fastness to

perspiration

001 4-5 4-5 4-5 Pass

002 4-5 4-5 4-5 Pass

003 4-5 4-5 4-5 Pass

004 4-5 4-5 4-5 Pass

005 4-5 4-5 4-5 Pass

006 4-5 4-5 4-5 Pass

007 4-5 4-5 4-5 Pass

008 4-5 4-5 4-5 Pass

009 4-5 4-5 4-5 Pass

010 4-5 4-5 4-5 Pass

011 4-5 4-5 4-5 Pass

012 4-5 4-5 4-5 Pass

013 4-5 4-5 4-5 Pass

015 4-5 4-5 4-5 Pass

016 4-5 4-5 4-5 Pass

017^1 4-5 4-5 4-5 Pass

018 4-5 4-5 4-5 Pass

019 4-5 4-5 4-5 Pass

020 4-5 4-5 4-5 Pass

021 4-5 4-5 4-5 Pass

022 4-5 4-5 4-5 Pass

023 4-5 4-5 4-5 Pass

Notes on color change and staining grades: Grade 5 = Undetectable color change or staining Grade 4 = Slight color change and/or staining Grade 3 = Noticeable color change and/or staining Grade 2 = Considerable color change and/or staining Grade 1 = Severe color change and/or staining

Note: 1. “*” denotes conclusion was drawn according to client‟s specification

2. “^1” denotes sample was received on 2013-01-17

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 18 of 34


Dated 2013-02-04

3.6 Nickel Release Test

Entry 27 of Regulation (EC) No. 552/2009 amending Annex XVII of REACH Regulation (EC) No. 1907 / 2006 (Formerly restricted under Directive 94/27/EEC) Test according to EN 12472:2005+A1:2009 and EN 1811:2011

[Reporting Limit = 0.05 μg/cm2/week]

Sample

Size of Tested

sample Area

(cm2)

Volume of Test Solution Used

(mL)

Nickel Release

(μg/cm2/week)

Average

Nickel Release

(μg/cm2/week)

Maximum

Permissible

Limit (μg/cm

2/week)

Conclusion

015 1st sample 1.82 2.00 <0.05 <0.05 0.5 Pass 2nd sample 1.82 2.00 <0.05

3rd sample 1.82 2.00 <0.05 Note: 1. “<” denotes less than 2. “cm

2” denotes square centimeter

3. “μg/ cm2/week” denotes microgram per square centimeter per week

4. “mL” denotes milliliter 5. A larger volume to surface area ratio was used due to the purpose of fully

immersion. Remarks: Entry 27 of Regulation (EC) No. 552/2009 amending Annex XVII of REACH Regulation

(EC) No.1907 / 2006 (Formerly restricted under Directive 94/27/EEC) Permissible Limit Non-body piercing articles (0.5 µg/cm

2/week limit)

Nickel release value (µg/cm2/week) Conclusion

≤ 0.28 Pass

0.28 – 0.88 Inconclusive *

≥0.88 Failed

Body piercing articles (0.2 µg/cm

2/week limit)

Nickel release value (µg/cm2/week) Conclusion

≤ 0.11 Pass

0.11 – 0.35 Inconclusive *

≥0.35 Failed

* Inconclusive means it is not possible to claim compliance with the REACH Regulation. It is suggested that the materials can be unsuitable and alternative materials should be used.

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 19 of 34


Dated 2013-02-04

3.7

Organotin Compounds Content Test (Tributyltin TBT/ Dioctyltin DOT/Di-n-butyltin DBT/Triphenyltin TPhT)

In house method test with reference to DIN EN ISO 17353:2005, solvent extraction with acidified methanol, followed by derivatization and GC-MS analysis [Reporting Limit = 0.025 mg/kg]

Compounds Results [mg/kg]

001+002+003 004+005+006 007+008+009 Dibutylin (DBT) <0.025 <0.025 <0.025 Tributyltin (TBT) <0.025 <0.025 <0.025 Dioctyltin(DOT) <0.025 <0.025 <0.025 Triphenyltin(TPhT) <0.025 <0.025 <0.025

Client’s specification TBT, TPhT<0.5mg/kg DOT, DBT<1.0mg/kg

Conclusion* Pass Pass Pass


010+016+017 011+012 018+019+020 Dibutylin (DBT) <0.025 <0.025 <0.025 Tributyltin (TBT) <0.025 <0.025 <0.025 Dioctyltin(DOT) <0.025 <0.025 <0.025 Triphenyltin(TPhT) <0.025 <0.025 <0.025




021+022+023 Dibutylin (DBT) <0.025 Tributyltin (TBT) <0.025 Dioctyltin(DOT) <0.025 Triphenyltin(TPhT) <0.025


Conclusion* Pass

Note 1. “<” denotes less than

2. “mg/kg” denotes milligram per kilogram

3. “*” denotes conclusion was drawn according to client‟s specification

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 20 of 34


Dated 2013-02-04

3.8

Polycyclic Aromatic Hydrocarbons (PAHs) Content Test

Extraction method with reference to ZEK 01.4-08 and followed by GC-MS analysis [Reporting Limit = 0.10 mg/kg]


011 012 013* Naphthalene <0.10 <0.10 NA Acenaphthylene <0.10 <0.10 NA Acenaphthene <0.10 <0.10 NA Fluorene <0.10 <0.10 NA Phenanthrene <0.10 <0.10 NA Anthracene <0.10 <0.10 NA Fluoranthene <0.10 <0.10 NA Pyrene <0.10 <0.10 NA Benzo[a]anthracene <0.10 <0.10 NA Chrysene <0.10 <0.10 NA Benzo[b]fluoranthene <0.10 <0.10 NA Benzo[j]fluoranthene <0.10 <0.10 NA Benzo[k]fluoranthene <0.10 <0.10 NA Benzo[a]pyrene <0.10 <0.10 NA Benzo[e]pyrene <0.10 <0.10 NA Benzo[ghi]perylene <0.10 <0.10 NA dibenzo[ah]anthracene <0.10 <0.10 NA Indeno[1,2,3-cd]pyrene <0.10 <0.10 NA Sum of detected PAHs <0.20 <0.20 NA Category Category 1 Category 1 Category 1 Conclusion Pass Pass NA

Note: 1. “<” denotes less than 2. “mg/kg” denotes milligram per kilogram 3. “*” denotes test specimen less than 50 milligram is not required to test the Polycyclic Aromatic

Hydrocarbons according to ZEK 01.4-08 4. “NA” denotes Not Applicable 5. Limits for PAH in product according to ZEK 01.4-08

Parameter (mg/kg) Category 1 Category 2 Category 3

Materials intended to be put in the mouth or materials of toys for children aged < 36 months with intended skin contact

#

Materials not covered by category 1, with foreseeable skin contact for longer than 30 seconds (long-term skin contact)

Materials not covered by category 1 or 2 with foreseeable skin contact up to 30 seconds (short term skin contact)

Benzo[a]pyrene Not detectable (< 0,2)* 1 20

Sum 18 PAH (EPA)

Not detectable (< 0,2)* 10 200

* If the limits of category 1 are surpassed but the limits of category 2 still met, the confirmation of suitability of contact with foodstuff or the oral mucosa can be verified by an additional specific migration test of the PAH components according to EN 1186 and § 64 LFBG 80.30-1. The results of the migration test shall be evaluated according to law criteria for foodstuff.

# according to the regulations of the EK2.

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 21 of 34


Dated 2013-02-04

3.9 Regulated Phthalates Test

Consumer Product Safety Improvement Act of 2008 (Section 108) CPSC-CH-C1001-09.3 – Standard Operating Procedure for Determination of Phthalates [Reporting Limit = 0.005 %]

Compounds Results [%]

011+012 Dibutyl phthalate, (DBP) N.D. Benzyl butyl phthalate, (BBP) N.D. Bis (2-ethylhexyl) phthalate, (DEHP) N.D. Di-n-octyl phthalate, (DNOP) N.D. Di-isononyl phthalate, (DINP) N.D. Di-isodecyl phthalate, (DIDP) N.D.

Conclusion Pass

3.10 Regulated Phthalates Test

Regulation (EC) No.1907/2006 and its amendment Regulation (EC) No. 552/2009 (REACH) Annex XVII, Entry 51 and 52 Solvent extraction by chloroform and GC-MS analysis. [Reporting Limit = 0.005 %]

Compounds Results [%]

011+012 024 Bis (2-ethylhexyl) phthalate, DEHP N.D. N.D. Dibutyl phthalate, DBP N.D. N.D. Benzyl butyl phthalate, BBP N.D. N.D. Di-isononyl phthalate, DINP N.D. N.D. Di-isodecyl phthalate, DIDP N.D. N.D. Di-n-octyl phthalate, DNOP N.D. N.D.

Sum of DEHP, DBP & BBP1 N.D. N.D. Sum of DINP, DIDP, DNOP2 N.D. N.D.

Conclusion Pass Pass [1] Restricted sum of DEHP, DBP, & BBP < 0.1% by weight [2] Restricted sum of DINP, DIDP, & DNOP < 0.1% by weight Note:

1. “N.D.” denotes Not Detected 2. “%” denotes percentage by weight 3. “<” denotes less than

Note: 1. “N.D.” denotes Not Detected. 2. “%” denotes percentage by weight

3. Not more than 0.1% of each DEHP, DBP, BBP for children‟s toys and child care articles 4. Not more than 0.1% of each DINP, DIDP, DNOP for children‟s toys that can be placed in the

mouth and child care articles

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 22 of 34


Dated 2013-02-04

3.11 Total Lead Content Test

Consumer Product Safety Improvement Act of 2008 (Section 101) Test in accordance with CPSC-CH-E1002-08 (Non-Metallic components), CPSC-CH-E1001-08.1 (Metallic components Including Children's Metal Jewelry) [Reporting Limit = 10.0 mg/kg]

Sample Result [mg/kg]

Limit [mg/kg]

Conclusion

001+002+003 <10.0 <100 Pass 004+005+006 <10.0 <100 Pass 007+008+009 <10.0 <100 Pass 010+016+017 <10.0 <100 Pass

011+012 <10.0 <100 Pass 014 12.5 <100 Pass 015 <10.0 <100 Pass

018+019+020 <10.0 <100 Pass 021+022+023 <10.0 <100 Pass

3.12

Total Cadmium Content Test Regulation (EC) No.1907/2006 (REACH) and its amendment Regulation (EU) No. 494/2011, Annex

XVII, Entry 23 EN 1122:2001 and followed by Atomic Absorption Spectrophotometer (AAS) or Inductively Coupled Plasma Optical Emission Spectrophotometer (ICP-OES) [Reporting Limit = 2.0 mg/kg]


Limit [mg/kg]

Conclusion

011+012 <2.0 <100 Pass 024 <2.0 <100 Pass

Note: 1. “mg/kg” denotes milligram per kilogram 2. “<” denotes less than

Material / Product Limit

Plastics <100 mg/kg

Metal jewellery / imitation jewellery

articles and hair accessories <100 mg/kg

Brazing Fillers <100 mg/kg

Coating <1000 mg/kg

Paint with Zinc content > 10% <1000 mg/kg

Paint with Zinc Content ≤ 10% Not Detected

Note: 1. “mg/kg” denotes milligram per kilogram

2. “<” denotes less than

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 23 of 34


Dated 2013-02-04

3.13

Formaldehyde Content Test

Client‟s specification test according to DIN EN ISO 14184-1:2011, Formaldehyde content determined by UV-Visible spectroscopy [Reporting Limit = 16mg/kg]


Client's Specification [mg/kg]

Conclusion*

001 <16

<16

Pass 002 <16 Pass 003 <16 Pass 004 <16 Pass 005 <16 Pass 006 <16 Pass 007 <16 Pass 008 <16 Pass 009 <16 Pass 010 <16 Pass 016 <16 Pass 017 <16 Pass 018 <16 Pass 019 <16 Pass 020 <16 Pass 021 <16 Pass 022 <16 Pass 023 <16 Pass

Note: 1. “mg/kg” denotes milligram per kilogram 2. “<” denotes less than 3. “*” denotes conclusion was drawn according to client‟s specification

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 24 of 34


Dated 2013-02-04

3.14

Pentachlorophenol (PCP) and Sum of Tetrachlorophenols (TeCP) Content Test Client‟s specification test with reference to DIN EN ISO 17070: 2006, followed by GC-ECD/GC-MSD

analysis [Reporting Limit = 0.05 mg/kg]

Element Results [mg/kg]

001 002 003 2,3,5,6-Tetrachlorophenol <0.05 <0.05 <0.05 2,3,4,6-Tetrachlorophenol <0.05 <0.05 <0.05 2,3,4,5-Tetrachlorophenol <0.05 <0.05 <0.05 Sum of TeCP <0.05 <0.05 <0.05 Pentachlorophenol <0.05 <0.05 <0.05

Client’s Specification PCP < 0.05 mg/kg Sum of TeCP not detected











TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 25 of 34


Dated 2013-02-04

3.14

Pentachlorophenol (PCP) and Sum of Tetrachlorophenols (TeCP) Content Test Client‟s specification test with reference to DIN EN ISO 17070: 2006, followed by GC-ECD/GC-MSD

analysis [Reporting Limit = 0.05 mg/kg]














TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 26 of 34


Dated 2013-02-04

3.15 Flame Retardants Test

In house method test with reference to US EPA 3550C, extraction with organic solvent and analyzed by GC-MS [Reporting Limit = 100 mg/kg for SCCP, 5 mg/kg for others]

Flame Retardants Result [mg/kg]

Sample 001 Sample 002 Sample 003

Polybrominated biphenyls (PBBs)

Monobromobiphenyl N.D. N.D. N.D. Dibromobiphenyl N.D. N.D. N.D. Tribromobiphenyl N.D. N.D. N.D. Tetrabromobiphenyl N.D. N.D. N.D. Pentabromobiphenyl N.D. N.D. N.D. Hexabromobiphenyl N.D. N.D. N.D. Heptabromobiphenyl N.D. N.D. N.D. Octabromobiphenyl N.D. N.D. N.D. Nonabromobiphenyl N.D. N.D. N.D. Decabromobiphenyl N.D. N.D. N.D.

Bis(2,3-dibromopropyl)phosphate N.D. N.D. N.D.

Tris (2-chloroethyl) phosphate (TCEP) N.D. N.D. N.D.

Tris-(2,3-dibromopropyl)-phosphate (TRIS) N.D. N.D. N.D.

Tris(aziridinyl)phosphine oxide (TEPA) N.D. N.D. N.D.

Pentabromodiphenyl ether (PentaBDE) N.D. N.D. N.D.

Octabromodiphenyl ether (OctaBDE) N.D. N.D. N.D.

Hexabromocyclododecane (HBCDD) N.D. N.D. N.D.

SCCP N.D. N.D. N.D.

Client’s specification All flame retardants not detected


Note: 1. “N.D.” denotes Not Detected 2. “mg/kg” denotes milligram per kilogram 3. “*” denotes conclusion was drawn according to client‟s specification

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 27 of 34


Dated 2013-02-04


In house method test with reference to US EPA 3550C, extraction with organic solvent and analyzed

by GC-MS [Reporting Limit = 100 mg/kg for SCCP, 5 mg/kg for others]












SCCP N.D. N.D. N.D.




TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 28 of 34


Dated 2013-02-04















SCCP N.D. N.D. N.D.




TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 29 of 34


Dated 2013-02-04















SCCP N.D. N.D. N.D.




TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 30 of 34


Dated 2013-02-04















SCCP N.D. N.D. N.D.




TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 31 of 34


Dated 2013-02-04















SCCP N.D. N.D. N.D.




TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 32 of 34


Dated 2013-02-04

3.16 Analysis of the 84 substances of very high concern (SVHC) on the Candidate List for

authorization, concerning Regulation (EC) No. 1907/2006 as published on the European

Chemicals Agency (ECHA) website in October 2008, January 2010, March 2010, June 2010, December 2010, June 2011, December 2011 and June 2012 Analysis based on LCMS, GCMS, Headspace-GCMS, ICP-OES/AAS, UV-VIS and XRF.

Parameters Result

025+026 Limit Eighty-Four substances of very high concern

2 <0.1 <0.1% (w/w)

Note: 1. “<” denotes less than 2. Candidate List for authorization, concerning Regulation (EC) No 1907/2006 as published on the European

Chemicals Agency (ECHA) website in October 2008, January 2010, March 2010, June 2010 , December 2010 , June 2011, December 2011 and June 2012.

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 33 of 34


Dated 2013-02-04

No. Substance Name CAS No. Substance Name CAS

1 Anthracene 120-12-7 28 Lead sulfochromate yellow

(C.I. Pigment Yellow 34)* 1344-37-2

2 4,4'- Diaminodiphenylmethane 101-77-9 29 Tris(2-chloroethyl)phosphate (TCEP) 115-96-8

3 Dibutyl phthalate (DBP) 84-74-2 30 Acrylamide 79-06-1

4 Cobalt dichloride * 7646-79-9 31 Trichloroethylene 79-01-6

5 Diarsenic pentaoxide* 1303-28-2 32 Boric Acid* 10043-35-3

11113-50-1

6 Diarsenic trioxide * 1327-53-3 33 Disodium tetraborate, anhydrous* 1303-96-4 1330-43-4

12179-04-3

7 Sodium dichromate * 7789-12-0 10588-01-9

34 Tetraboron disodium heptaoxide, hydrate* 12267-73-1

8 5-tert-butyl-2,4,6-trinitro-m -xylene (musk xylene)

81-15-2 35 Sodium chromate* 7775-11-3

9 Bis (2-ethyl(hexyl)phthalate) (DEHP) 117-81-7 36 Potassium chromate* 7789-00-6

10

Hexabromocyclododecane (HBCDD)

and all major diastereoisomers identified (α – HBCDD, β-HBCDD, γ-HBCDD)

25637-99-4 3194-55-6

(134237-51-7, 134237-50-6, 134237-52-8)

37 Ammonium dichromate* 7789-09-5

11 Alkanes, C10-13, chloro (Short Chain Chlorinated Paraffins)

85535-84-8 38 Potassium dichromate* 7778-50-9

12 Bis(tributyltin)oxide,(TBTO)* 56-35-9 39 Cobalt(II) sulphate * 10124-43-3

13 Lead hydrogen arsenate * 7784-40-9 40 Cobalt(II) dinitrate * 10141-05-6

14 Benzyl butyl phthalate (BBP) 85-68-7 41 Cobalt(II) carbonate* 513-79-1

15 Triethyl arsenate * 15606-95-8 42 Cobalt(II) diacetate* 71-48-7

16 Anthracene oil§

90640-80-5 43 2-Methoxyethanol 109-86-4

17 Anthracene oil, anthracene paste, distn. lights

§

91995-17-4 44 2-Ethoxyethanol 110-80-5

18 Anthracene oil, anthracene paste,

anthracene fraction§

91995-15-2 45 Chromium trioxide* 1333-82-0

19 Anthracene oil, anthracene-low§ 90640-82-7 46

Acids generated from chromium trioxide and their oligomers:

a. Chromic acid* b. Dichromic acid * c. Oligomers of chromic acid and dichromic

acid*

7738-94-5

13530-68-2

20 Anthracene oil, anthracene paste§ 90640-81-6 47 2-Ethoxyethyl acetate (2-EEA) 111-15-9

21 Pitch, coal tar, high temp. § 65996-93-2 48 Strontium chromate* 7789-06-2

22 Aluminosilicate Refractory Ceramic Fibres*

- 49

1,2-Benzenedicarboxylic acid, di-C7-11-

branched and linear alkyl esters (DHNUP) §

68515-42-4

23 Zirconia Aluminosilicate, Refractory

Ceramic Fibres* - 50

Hydrazine 7803-57-8,

302-01-2

24 2,4-Dinitrotoluene 121-14-2 51 1-Methyl-2-pyrrolidone

872-50-4

25 Diisobutyl phthalate 84-69-5 52 1,2,3-Trichloropropane

96-18-4

26 Lead chromate* 7758-97-6

53

1,2-Benzenedicarboxylic acid, di-C6-8-branched

alkyl esters, C7-rich (DIHP) 71888-89-6 27

Lead chromate molybdate sulphate red

(C.I. Pigment Red 104)* 12656-85-8

- „*‟ denotes concentration of the SVHC was conversion of test results of the corresponding metal ion

- „§‟ The substances are UVCB (substance of unknown or variable composition, complex reaction products or biological material), the

test results are calculated based on the main constituents.

TÜV SÜD Hong Kong




Tel.: (852) 2443 3774

Fax: (852) 2944 0005

Page 34 of 34


Dated 2013-02-04

No. Substance Name CAS No. Substance Name CAS

54 1,2-Dichloroethane 107-06-2 70 Potassium hydroxyoctaoxodizincatedichromate* 11103-86-9

55 2,2'-Dichloro-4,4'-methylenedianiline (MOCA)

101-14-4 71 Trilead diarsenate* 3687-31-8

56 2-Methoxyaniline, o-Anisidine 90-04-0 72 1,2-bis(2-methoxyethoxy)ethane (TEGDME;

triglyme) 112-49-2

57 4-(1,1,3,3-Tetramethylbutyl)phenol, (4-

tert-Octylphenol) 140-66-9 73

1,2-dimethoxyethane; ethylene glycol dimethyl

ether (EGDME) 110-71-4

58 Arsenic acid* 7778-39-4 74 Diboron trioxide* 1303-86-2

59 Bis(2-methoxyethyl) ether 111-96-6 75 Formamide 75-12-7

60 Bis(2-methoxyethyl) phthalate 117-82-8 76 Lead(II) bis(methanesulfonate)*

17570-76-2

61 Calcium arsenate* 7778-44-1 77 1,3,5-tris(oxiranylmethyl)-1,3,5-triazine-2,4,6(1H,3H,5H)-trione (TGIC)

2451-62-9

62 Dichromium tris(chromate)* 24613-89-6 78 1,3,5-tris[(2S and 2R)-2,3-epoxypropyl]-1,3,5-triazine-2,4,6-(1H,3H,5H)-trione (β-TGIC)

59653-74-6

63 Formaldehyde, oligomeric reaction products with aniline (technical MDA)

§

25214-70-4 79 4,4'-bis(dimethylamino)benzophenone (Michler's ketone)

90-94-8

64 Lead diazide* 13424-46-9 80 N,N,N',N'-tetramethyl-4,4'-methylenedianiline

(Michler's base) 101-61-1

65 Lead dipicrate* 6477-64-1 81

[4-[[4-anilino-1-naphthyl][4-(dimethylamino)phenyl]methylene]cyclohexa-

2,5-dien-1-ylidene] dimethylammonium chloride (C.I. Basic Blue 26)#

2580-56-5

66 Lead styphnate* 15245-44-0 82

[4-[4,4'-bis(dimethylamino)

benzhydrylidene]cyclohexa-2,5-dien-1-ylidene]dimethylammonium chloride (C.I. Basic Violet 3)#

548-62-9

67 N,N-dimethylacetamide (DMAC) 127-19-5 83 4,4'-bis(dimethylamino)-4''-(methylamino)trityl alcohol # 561-41-1

68 Pentazinc chromate octahydroxide* 49663-84-5 84 α,α-Bis[4-(dimethylamino)phenyl]-4 (phenylamino)naphthalene-1-methanol (C.I. Solvent Blue 4)#

6786-83-0

69 Phenolphthalein 77-09-8 - - -

- „*‟ denotes concentration of the SVHC was conversion of test results of the corresponding metal ion - „

§‟ The substances are UVCB (substance of unknown or variable composition, complex reaction products or biological material), the

test results are calculated based on the main constituents. - “

#” denotes the substance does only fulfil the criteria of REACH Art. 57 (a) if it contains Michler's ketone (CAS Number: 90-94-8) or

Michler's base (CAS Number: 101-61-1) in a concentration ≥ 0.1% (weight / weight).

TÜV SÜD Hong Kong Ltd TÜV SÜD Group

Tested by: Reviewed by:

Angus Hung Project Manager Chemical Department

Christina Chan Laboratory Manager Chemical Department

- End of Report -

Document ID: GCN_HK_GTC – Rev.1 Effective date 2010-05-05

General Terms and Conditions of TÜV SÜD Hong Kong Limited

(hereinafter referred to as the company)

1. General Information and Definitions

(1.1) In the event that an order for any services is placed, the Client shall accept the General Terms and Conditions. The General Terms and Conditions shall be applicable to all orders ,resulting contracts and other arrangements, including all offers made or services provided by the Company or any of its affiliated companies They are not appli-cable if and as far as they are in conflict with the regulations on services performed on behalf of governments, government bodies or any other public entity, or they are in conf l ic t wi th mandatory provisions of local law. The Client’s placement of orders as well as the conclusion of contracts with the Company shall be regarded as aware-ness and acceptance of these General Terms and Conditions.

(1.2) The Company strongly recommends any Client or potential Client to read the full text of these General Terms and Conditions prior to placement of any order to or conclusion of any contract with the Company. Ancillary agreements, promises and other statements made on the part of the Company staff or the experts called upon by them shall be bind-ing only if they are expressly confirmed by the Company in writing. This shall also apply to any modifications of this clause.

2. Provision of Services

(2.1) With due care and skill, the Company will provide services according to Client's specific instructions as made available by the Client. In the absence of Client’s specific instructions, the following is deemed as instructions given to the Company: (a) The terms of any standard specification sheet or standard order form provided by the

Company; and/or (b) Any relevant usage, practice or trade custom; and/or (c) Such methods the Company considers technically, operationally and/or on financial

grounds appropriate. (2.2) No other party is entitled to give any instructions particularly on the scope and type of the

services or the reports delivered, or on the resulting certificates (the “Reports of Findings”), unless the Company receives prior written instructions to the contrary from the Client. The Client hereby irrevocably authorizes the Company to deliver Reports of Findings to a third party where so instructed by the Client or, at the Company’s discretion, where it implicitly fol-lows from circumstances, trade custom, usage or practice.

(2.3) The Information stated in the Report of Findings is derived from the results of inspection or testing procedures carried out in accordance with the instructions and/or Company’s as-sessment of such results on the basis of any technical standards, trade custom or prac-tice, or other circumstances which should in Company’s professional experience be taken into account.

(2.4) Reports of Findings issued after the testing of samples refer the Company’s opinion only on samples under testing and not to the lot from which the samples were drawn.

(2.5) Client agrees that the Company’s sole responsibility is to be present at the time of the third party’s intervention and to forward the results, or confirm the occurrence of the intervention, in case Client requests the Company to witness any third party’s intervention. Client agrees that the Company will use the test methods for analysis as requested in the request form, and if none is stated in the form, the Company will choose the appropriate test methods for analysis.

(2.6) The Reports of Findings issued by the Company will reflect the facts as recorded by it at the time of its intervention only and within the limits of the instructions received or, in the absence of such instructions, within the limits of the alternative parameters applied as provided for in Clause 2.1. The Company is under no obligation to refer to, or report upon, any facts or circumstances, which are outside the specific instructions received or al-ternative parameters applied.

(2.7) The performance of all or part of the services may be delegated to an agent or subcon-tractor by the Company. The Client authorizes the Company to disclose all information ne-cessary for such performance to the agent or subcontractor.

(2.8) Documents reflecting engagements contracted between the Client and third parties or third party documents, e.g. sales contract copies, letters of credit, bills of lading, etc. should be made available to the Company. These are considered to be for information only, and do not extend or restrict the scope of the services or the obligations accepted by the Company.

(2.9) The Company agrees that, by providing the services to the Client, it neither takes the place of Client or any third party, nor otherwise assumes, abridges, abrogates or undertakes to discharge any duty of the Client to any third party or that of any third party to the Client. Al-so, it does not release the Client or any third party from any of their obligations.

(2.10) Depending on the nature of each sample, all samples given to the Company shall be retained for a maximum of 3 months or for such other shorter time period as the nature of the sample permits, and then sent back to Client or otherwise disposed of at the Compa-ny’s discretion. After that time the Company will not be responsible for the samples. Storage of samples for more than 3 months shall incur a storage fee payable by the Client. If sam-ples are returned to the Client, the Client will be billed a handling and freight fees. Special disposal charges will be billed to the Client if incurred.

3. Client’s Obligations The Client shall:

(3.1) ensure that all required supporting documents, information and instructions as submitted are accurate, trueful and complete. These information are to be submitted in a timely not later than 2 working days from the date of which the services are requested by the Client

(3.2) ensure to give all necessary access for the Company's representatives to the premis-es where the services are to be performed and to take all necessary steps to eliminate or reme-dy any obstacles to, or interruptions in the performance of the services;

(3.3) make available any special equipment and personnel necessary for the performance of the services, if required;

(3.4) ensure that for the safety and security of working conditions, sites and installations, all ne-cessary measures are taken during the performance of services. In this respect, the Client will not rely on the Company's advice whether required or not;

(3.5) inform the Company of any known hazards or dangers, actual or potential, associated with any order, samples, testing or any other service rendered by the Company well in advance. Those are, but are not limited to the presence or risk of radiation, environ-mental pollution or poisons- toxic or noxious or explosive elements or materials;

(3.6) fully exercise all its rights and discharge all its liabilities under any relevant sales or other contract with a third party.

4. Fees and Payment

(4.1) All Fees not agreed on between the Company and Client at the time the order is placed or a contract is concluded shall be determined by the Company’s Schedule of Fees (which are subject to change). All applicable taxes shall be paid by Client, as far as man-datory laws do not provide otherwise.

(4.2) Unless a specific period is established in the invoice, the Client shall pay upon receiv-ing the invoice, but not later than 30 days from the relevant invoice date or within such other period as may be established by the Company in the invoice (the “Due Date”).

(4.3) The Client shall not be entitled to retain or defer due payment of any sums to the Company on account of any dispute, counter claim or set-off against the Company. The Company reserves the right to retain or defer any due payments if any dispute arises with or it raises any counterclaim against the Client. The Company is entitled to set off due payments against payments of the

Client. (4.4) For the collection of unpaid fees, the Company may decide to bring action in any

court with competent jurisdiction. The corresponding collection costs, including at-torney's fees and related costs, shall be borne by the Client, as far as the manda-tory local law does not provide otherwise.

(4.5) In case of any unforeseen problems or expenses arise while carrying out the ser-vices, the Company informs the Client. In such cases, the Company shall be en-titled to charge additional fees to cover extra time and to invoice extra costs neces-sarily incurred to complete the services.

(4.6) If the Company is unable to perform all or parts of the services for any cause whatsoever beyond the Company’s control, including the failure by Client to comp-ly with any of its obligations provided for in the foregoing Clause 3, the Company shall nevertheless be entitled to payments of: (1) The amount of all non-refundable expenses incurred by the Company; and (2) A proportion of the agreed fee equal to the proportion of the services actual-

ly carried out. 5. Suspension or Termination of Services

In any case mentioned below, the Company shall be entitled to either suspend or terminate the provision of the services immediately and without any liability: (5.1) Failure by the Client to comply with any of its obligations under these General

Terms and Conditions and such failure is not remedied within 10 days after a no-tice of such failure has been delivered to the Client; or

(5.2) Any suspension of payment, arrangement with creditors, bankruptcy, insol-vency, receivership or cessation of business by Client.

6. Liability and Indemnification

(6.1) Limitation of Liability: (1) Clients seeking a guarantee against loss or damage should obtain appro-

priate insurance. The Company is neither an insurer nor a guarantor and disclaims all liability in such capacity.

(2) Reports of Findings are issued on the basis of the information, documents and/or samples provided by, or on behalf of the Client and solely for the benefit of the Client who is obliged to act on the basis of such Reports of Find-ings. Neither the Company nor any of its staff, agents or subcontractors shall be liable to the Client nor to any third party for any actions taken or not taken on the basis of such Reports of Findings, or for any incorrect results arising from unclear, erroneous, incomplete, misleading or false information pro-vided to the Company.

(3) For any delayed, total or partial non-performance of the services arising directly or indirectly from any event beyond the Company’s control, includ-ing failure by Client to comply with any of its obligations hereunder, the Company shall not be liable.

(4) The liability of the Company in respect of any claim for loss, damage or ex-pense of any nature and howsoever arising shall in no circumstances ex-ceed a total aggregate sum equal to 10 times the amount of the fee paid in respect of the specific service which gives rise to such claim, and shall in any case not exceed the equivalent of 25,000 EUR in HKD.

(5) For any indirect or consequential loss (including loss of profits), the Compa-ny shall not have any liabilities.

(6) In case of any claim, the Client must give written notice to the Compa-ny within 30 days of discovery of the facts with all necessary documents to justify such claim. In any case, the Company shall be discharged from all liability for all claims for loss, damage or expense unless a lawsuit is brought within two years from: (i) the performance date of the Company for its services which refers to

the claim; or (ii) the date when the service should have been completed in the event

of any alleged non-performance. (6.2) Indemnification: Against all claims (actual or threatened) by any third party for

loss, damage or expenses of whatsoever nature including all legal expenses and related costs and howsoever arising relating to the performance, purported performance or non-performance of any services, the Client shall guarantee, hold harmless and indemnify the Company and its officers, employees, agents or sub-contractors.

7. Obligation of Confidentiality, Copyright, Data Privacy Protection

(7.1) The Company shall be authorized to make file copies of written documents, which have been made available to it for review and which are important for processing the order.

(7.2) Insofar as Reports of Findings are prepared in the course of processing the order and which are subject to the protection of copyright, then the Company shall grant the Client a simple, non-transferable right to use, insofar as this is neces-sary and in accordance with the contractually presupposed purpose. Other rights shall not be transferred; in particular, the customer shall not be entitled to modify and/or edit audit reports or to make use of such outside of his business premises.

(7.3) The Company and its staff which may be called in shall not disclose or use trade and business matters about which they have gained knowledge during the per-formance of their work without proper authorization.

8. Miscellaneous

(8.1) The validity, legality and enforceability of the remaining provisions shall not in any way be affected or impaired, even if any one or more provisions of these General Conditions are found to be illegal or unenforceable in any respect.

(8.2) Client shall not directly or indirectly entice, encourage or make any offer to Company’s employees to leave their employment with the Company, during the course of providing the services and for a period of one year thereafter.

(8.3) Use of the Company’s corporate name or registered marks for advertising pur-poses is not permitted without the Company’s prior written authorization.

9. Governing Law, Jurisdiction and Dispute Settlement

(9.1) Unless specifically agreed otherwise, all disputes arising out or in connection with contractual relationship(s) hereunder shall be governed by the applicable laws and regulations of the Hong Kong S.A.R Region.

(9.2) Place of performance for any obligation arising out of this contract shall be Hong Kong, the Place of TÜV SÜD Hong Kong Limited, unless otherwise ex-pressly agreed by the parties.

10. Languages

In the event of any discrepancy between the English and the Chinese version of these General Terms and Conditions, the English version shall prevail.